enami
bdd9be2dc3
Don't print newline here since it is supposed that more message is printed.
2000-08-04 04:52:37 +00:00
hubertf
54c5777f78
sync with GENERIC rev. 1.72
2000-08-04 02:23:22 +00:00
hubertf
97ec6e11d8
Explain what the strip pseudo-device is for
2000-08-04 02:17:46 +00:00
soda
9baf1fff99
NEC RISCserver 2200 support by bob meader <bob@cci.net>.
...
Now NetBSD works with RISCserver 2200.
2000-08-03 23:58:23 +00:00
nathanw
b3e0af3d32
Fix a problem uncovered by rev 1.5 of pcibios.c:
...
Avoid interpreting the upper 32 bits of 64-bit BARs as a 32-bit BAR.
Otherwise, the code would assume that the value 0 was incorrect and either:
(a) [on bus 0] "fix up" the address to some nonzero value, thus placing
the decoded address range outside of 32-bit address space, or
(b) [elsewhere] completely disable the device.
The fact that this behaviour depends on the bus number of the device is
already XXX'd.
XXX: This will need revisiting if and when we ever want to handle a PCI bus
XXX: with more than 32 bits of address space on an i386.
The onboard Adaptec 7890 on my Dell Precision Workstation 410 works again.
2000-08-03 20:10:45 +00:00
eeh
dd5c54d05c
Add fpu emulation instrumentation and fixup FCMP and FCMPE emulation for v9.
...
And rename the 128-bit `x' routines to `q' to match v9 terminology:
i - 32-bit int
x - 64-bit int
s - 32-bit fp
d - 64-bit fp
q - 128-bit fp
2000-08-03 18:32:07 +00:00
msaitoh
ac06675f56
add COMPAT_14
2000-08-03 11:30:30 +00:00
msaitoh
9b50348e47
set internal register correctly (SH4)
2000-08-03 08:19:26 +00:00
nathanw
e8b50cf289
Use the same idiom for iterating over allproc as everywhere else in the kernel.
2000-08-02 22:47:44 +00:00
eeh
7abe1d5edf
Garbage collection.
2000-08-02 22:26:35 +00:00
eeh
345d748512
PDB_BOOT and PDB_BOOT1 should not be the same value.
2000-08-02 22:25:45 +00:00
eeh
7ec33e899f
Get kernel profiling to work. Now if only gprof worked....
2000-08-02 22:24:38 +00:00
wiz
81b49011ff
uvm_inherit.h was removed, and doesn't seem to be needed here.
2000-08-02 15:24:40 +00:00
ragge
cf62d07e82
Fix bug that trashed the SPT if any copy* function were used before
...
the first swtch().
2000-08-02 12:13:22 +00:00
msaitoh
e049977033
check _BYTE_ORDER instead of BYTE_ORDER
2000-08-02 11:32:41 +00:00
tsubai
2c691df1ec
uvm/uvm_inherit.h was removed.
2000-08-02 09:06:56 +00:00
tsubai
eef346a5ec
Don't try to change subordinate bus number if pchb != grackle (for now).
2000-08-02 09:02:46 +00:00
soda
d6945520db
Use cpu_intr() definition from mips/cpu.h instead of local one
...
like other mips ports.
2000-08-02 08:57:15 +00:00
jeffs
8d300a3b14
setregs() cache sync turns out not to be needed with kern_exec 1.104
...
(which was 2 weeks after our internal trees full sync).
2000-08-02 06:46:47 +00:00
soda
0cbe0d600f
fix oversight introduced in previous my commmitment (revision 1.4),
...
pointed out by Michael Shalayeff <mickey@openbsd.org>.
2000-08-02 02:54:41 +00:00
eeh
dfe3516515
Include NONPLUS and just set the extras we need for 64-bit kernels.
2000-08-02 02:23:58 +00:00
jeffs
e1cf55c8a8
Make mips3_FlushICache() convert a0 into a KSEG0 + virtual index like
...
the _2way and mips3_FlushDCache(). This lets all mips3 cache ops accept
user virtual addresss w/o a tlb miss. Since this is now done in both
ICache flush routines, no need to do it in pmap.c. Fixed R4400
stability problems with setregs() cache flushing.
2000-08-01 23:38:26 +00:00
jeffs
e6bdec31fd
Fix vmapbuf() to call uvm_km_valloc_perfer_wait() call, but trunc_page()
...
to the prefer arg so we free the correct page.
2000-08-01 22:45:05 +00:00
eeh
a8cd48f9e6
`mem' is now a pointer, not an array. Fixes kernel coredumps.
2000-08-01 16:49:47 +00:00
briggs
8d6c85d001
Remove hack for unswapped read/write_multi in swapped space.
...
Driver now uses read/write_multi_stream_2.
2000-08-01 13:08:39 +00:00
tsubai
43b5c0039c
Enable rnd.
2000-08-01 08:23:37 +00:00
augustss
37ae63598b
Add midi at clcs.
2000-08-01 08:16:54 +00:00
uch
ae581ace81
reserve AGP space to avoid resource conflict.
2000-08-01 05:23:59 +00:00
eeh
57d2ec0b98
Overhaul cache flush code and coredump code.
2000-08-01 00:40:15 +00:00
eeh
568dca001c
Cleanup trapstate handling and garbage collect old stuff.
2000-08-01 00:36:05 +00:00
eeh
e5a87444c7
Cleanup trapframe and TSTATE handling.
2000-08-01 00:34:13 +00:00
eeh
6f9bfddd60
Add UVM_PAGEIDLE_ZERO.
2000-08-01 00:31:15 +00:00
eeh
cacbbd1117
Garbage collection.
2000-08-01 00:28:55 +00:00
eeh
d09c8ea0f1
Revamp cache flush routines.
2000-08-01 00:28:02 +00:00
eeh
07fc19421d
Pull in <machine/frame.h> to define BIAS and CC64FSZ.
2000-08-01 00:25:02 +00:00
eeh
aeb88321db
Call the parent bus dvmamap_unload function to clear the cache rather
...
than do it ourselves.
2000-08-01 00:22:41 +00:00
minoura
3094e3b89d
include <sys/types.h> to define u_int.
2000-07-31 23:40:02 +00:00
briggs
3f1e17a340
Define bus_space_*_stream_N functions as their non-stream counterparts.
2000-07-31 22:43:46 +00:00
briggs
3ce3697584
Add bus_space_*_stream_N functions.
2000-07-31 22:40:25 +00:00
briggs
bd823b939e
Fix code to read a string from the nubus board--it was not terminating
...
the string properly when the string on the board is longer than the
pre-allocated space.
2000-07-31 22:39:17 +00:00
eeh
ede765839e
Look for fpu files in the sparc subdirectory where they now reside.
2000-07-31 22:17:05 +00:00
msaitoh
9c331f1f89
use 'makeoptions LDSCRIPTBASE="sh.x"' (or shl.x) to select ldscript file
2000-07-31 20:57:45 +00:00
briggs
2cc07c0541
Add a DIAGNOSTIC panic if (count-using) bus_space macros are called with
...
a count of zero. Some drivers do this accidentally and some bus_space
implementations will fail if count is passed as zero (they are set up in
a do-{}-while structure).
2000-07-31 14:59:15 +00:00
mrg
978acd5367
sync with GENERIC32; enable rnd
2000-07-31 13:21:45 +00:00
mrg
ec14782383
hardcode onboard "hme" to "hme0"
2000-07-31 13:16:24 +00:00
mrg
b5ce82b4a0
define BDPRINTF in the !DEBUG case to nothing. PR#10688.
2000-07-31 05:40:22 +00:00
briggs
3717acff97
We may wish to install from an SMC-based ethernet, too.
2000-07-31 02:06:48 +00:00
briggs
f5882c7ffa
Make sure that bus_space read/write functions that take a count will not be
...
called if count is zero. The smc91cxx driver, for example, may try to call
bus_space_write_multi_2() with a count of 0.
2000-07-30 23:17:23 +00:00
briggs
2f76646af1
Some uncommitted poking around. No functional change.
2000-07-30 21:48:54 +00:00
briggs
1e909ae3ca
Add SMC-based ethernet and nsphy (AsanteFAST) and ukphy (just in case).
2000-07-30 21:46:39 +00:00