locore calls to go via a locore-entry jumptable.
Use the mips/mips/mips_machdep.c code to initialize locore state,
exception vectors, and the locore entry vector, instead of doing
it all in mach_init().
Update dumpsys() to use new-style signatures for dump routines,
even though the pmax SCSI drivers don't actually support dumping kernel
memory.
locore calls to go via a locore-entry jumptable.
Cast the (int) arguments to MachTLBUpdateEntry() to avoid
warnings. Variables TLB entries are still type-punned as either structs
or ints, without any regard, when the pmax-specific VM code passes
them as arguments to functions.
locore calls to go via a locore-entry jumptable.
Use mips_btop(), mips_round_page, mips_trunc_seg() instead
of pmax_btop(), pmax_round_page, pmax_trunc_seg().
Add Per's software-readonly-bit mechanism, since the r2000 and r4000
hardware TLB entries are very different, and the r4k has no space for
software bits in TLB entries. That is, this pmap code still won't work
on r4000 machines. Some other solution, like another jump table for
clients of the pmap code, is necessary.
locore calls to go via a locore-entry jumptable.
Declare r2000- and r4000-specific exception-handler functions, to which
trap() and interrupt() dispatch exceptions. Initialize r2000- and r4000-
specific exception-handler vectors, when CPU_R4000 and CPU_R2000 are
defined.
Update the stack-traceback code (partially) to understand and print
the new low-level exception-handler code, via which machine exception-vectors
send exceptions to call trap() or interrupt(). This needs more work.
It just causes a kernel panic, and will until the rest of the pmax
autoconfiguration is redone to use a bus-specific probe and attach
argument, or until KN01 devices are no longer attached to the mainbus.
an vector (struct) of function pointers. Add prototype declarations for
each vector entry.
Add declarations for the r2000 (MIPS-I) and r4000 (MIPS-III) locore
versions of the relevant functions.
update the 4.3bsd/Ultrix-compatible qvss-style mmap'ed framebuffer/input-event
code to use mips_round_page() et.al., not pmax_round_page().
Add explicit "int" return types to functions. Add prototyped forward
declarations.
Fix the the definitions of dtop cdevsw entry point functions to match
their declarations. Add explicit "int" declarations to functions.
Add prototyped declarations for all local functions.
Return zero from dtopstop().
Include the external declarations from dtopvar.h.
locore functions. The new names are used by C code to construct a jump-table,.
making it less infeasible to have a single kernel image work on both
r3000 and r4000 systems.
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
Changed struct ifnet to have a pointer to the softc of the underlying
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
remove their 'integrate' (usually defined to be 'static') keywords.
when lance drivers are split up by attachment, more than one file will
reference the copy/zero functions (i.e. not just the file that pulls in
am7990.c... and eventually inclusion of am7990.c should go away entirely).
Add prototypes to (most of) src/sys/arch/pmax/pmax. (The un-protytyped
parts still have pending merges with the Pica port.)
Fix splx() glitches in pmax/clock.c.
Delete old cpu/fpu identification from pmax/autoconf.c, use r4400/r4600/idt
aware code from Pica port, now in mips/mips/mips_machdep.c.
Delete unused multi-CPU autoconfiguration code; NetBSD/pmax does not
support decsystem 5800s anyway.
Update the pmax SCSI drivers (rz and tz) to use <machine/conf.h>.
Fix the driver entry points to have the correct signatures -- add
"ioflag" args to read() and write(), add "struct proc *p" arg to
open and close.
Stop using __BDEVSW_DUMP_OLD_TYPE, and update the rzdump and tzdump
entry points to have the correct, MI signatures.
NB: this is just syntactic sugar: both the caller and the dump entry
points ignore the additional args, and do exactly what they did before.
This must be fixed before using dump entry points in non-pmax drivers
(e.g., the MI scsi code).
add prototyped declarations for the callbacks which add old-style
(4.4bsd/pmax conf.old) SCSI controllers, and which configure SCSI slaves
on such controllers.
rewriting the SII driver to work with the MI scsi would be a better option,
if time were available, and the MI scsi code supported SCSI controllers with
an 8k upper bound on transfers.
Add prototyped declarations for scsiGroup0Cmd and scsiGroup1Cmd.
Add prototype declarations for scsiPrintSense. Cut the inqiury-response
pretty-printer from tz.c and rz.c and paste it in as scsiPrintInquiry.
-Wall -Wmissing-prototypes:
Add prototypes.
Fix printf() format strings (%x vs pointer-arg, %x with a long int).
Fix a possibly-uninitialized shadowing local variable "resid" in tzdone().
include <sys/systm.h> to get prototypes for printf() and bcopy().
Move to mips/pmax/genassym.c, as (most of) the assembler locore code is
being merged into a generic-MIPS locore.
Remove the redundant pmax/pmax/genassym.c.
* cut-and-paste all the code for both r2000 (MIPS-I) and r4000 (MIPS-III)
into both the pica and pmax locore.S.
* Change the names of the small segments of vector code that are
bcopied to the machine vector locations, to avoid clashing.
Get rid of the Sprite MachXXX names for the vector code, and
use use mips_r2000_xxx and mips_r4000_xxx instead.
Update the names used in the vector-copying code and trap handlers
to match.
* Most of the rest of the pica locore.S was copied from the pmax
locore.S, and then edited to work on an r4000. The names of
functions and of manifest constants stayed the same, although
both assmbler code and constant values changed.
cut-and-paste such code into contiguous blocks protected by
#if / #endif. Much of the cache and trap-handling code
needs r3000-only register fields, on the r3000, and r4000-only
insns and registers on the r4000.
* change the pmax r2000 exception-handling code to extract a trap
code with the user/kernel bit at 0x20 rather than 0x10.
(r2000s have 4-bit execption codes, r4000s have 5-bit.)
Use the a 16 from-user-space + 16-from-kernel space jump table,
just like on the r4000 pica port.
* add NOPs to the common code where required by the r4000 pipeline
constraints.
* add _C_LABEL() macros to the r4000 locore.
Comitted to provide a snapshot for others to test, and work on a cleaner merge.
* add "MIPS_3k_" for the MIPS-I r[23]000-specific register definitions.
* add "MIPS_4k_" for the MIPS-II/III r4000-specific register definitions.
* add #defines that provide the old values for locore and user
code, so the existing code continues to compile.
Regression-tested against the old headers by grepping for #define's,
editing out the defined symbols, and preprocessing with both the previous
machConst.h headers and this version.
Some unused symbols (CPU and FPU must-be-zero constants) are no longer defined.
Pica interrupt masks are now constant expressions instead of constant
values.
TODO:
* factor out the common #defines into src/sys/arch/mips.
* Get rid of the Sprite coding-style names (MACH_xxx).
* Separate out the r3k/r4k differences from the Pica/pmax differences.
* Figure out how to have a run-time choice of r3k vs. r4k support,
instead of a compile-time choice.
