cff90ff521
Enforce 10-bit width for I/O addresses of 16-bit PC Cards when I/O
...
start address is assigned by a driver.
2002-03-05 11:56:33 +00:00
ac36f7cb2c
bring in latest ALTQ from kjc. ALTQify some of the drivers.
2002-03-05 04:12:57 +00:00
877cb55678
regen (ELSA MicroLink mc all added)
2002-03-04 16:42:19 +00:00
b2b090d6b2
Add ELSA MicroLink mc all (ISDN + modem) card, OEMd from TDK.
2002-03-04 16:41:50 +00:00
64c7743a05
Don't "extern int cold;" - this is in <sys/kernel.h>.
2002-03-04 02:19:07 +00:00
47b3797fe7
Don't attempt to gather unrequested statistics.
...
Allow SIOCSWAVELAN with WI_RID_IFACE_STATS to request
an immediate statistics update.
We might in the future want to have SIOCGWAVELAN with
WI_RID_IFACE_STATS return an error if a statistics gathering is in
progress. Then the caller could request fresh statistics and gather
them when they are done. Instead, we currently just return whatever
statistics are available, which may be up to 60 seconds old.
2002-03-04 01:56:12 +00:00
1b7f309f0a
Correct misspellings of "failed".
2002-03-04 01:38:31 +00:00
e9d22f79b0
fix byte swapping when gathering statistics
...
this should complete the fix to pr 14385
AP scanning and statistic gathering should work on le hosts now
2002-03-04 01:33:17 +00:00
918b9d4dec
correctly handle AP scanning result when there are no APs
2002-03-04 01:30:04 +00:00
0dca7b4f6d
used %02x instead of %x when printing out BSS ids
2002-03-04 01:21:07 +00:00
0812667818
s/Faild/Failed/
2002-03-04 01:19:24 +00:00
e4ca1c8a44
Use the correct pointer for the timeout abort.
2002-03-04 00:53:33 +00:00
42172d9f1c
Try to configure timing correctly.
...
Get rid of some ad hoc debuging printfs.
2002-03-03 22:47:28 +00:00
29e873a235
Added wsmux_set_display() to fix the problem that wskbd wan't connected
...
to any display if keyboard was attached before display and both aren't console.
2002-03-02 08:22:26 +00:00
f48c7db878
Two more trivial bug fixes:
...
- copyin() the ntv argument to ntp_adjtime1(), to avoid some panics
- correctly handle the return value
And this still relates to kern/15519
2002-03-01 22:58:33 +00:00
5d5c5c0ddd
As siop_morecbd() is called from the kernel thread, protect access to the
...
queues with splbio.
2002-03-01 21:37:03 +00:00
6d484242b0
Regen: add Motorola Raven, Falcon and Hawk product IDs.
2002-03-01 13:48:59 +00:00
b1c2f47c30
Add Motorola Raven, Falcon and Hawk product IDs.
2002-03-01 13:47:30 +00:00
a03fa01ccc
Remove EBUS_PADDR_FROM_REG, as it does not realy creates a paddr on sparc.
...
It is superceeded by EBUS_ADDR_FROM_REG.
2002-03-01 11:49:06 +00:00
ba6fe47ae9
Simplify the way the hardware windows are mapped and adapt the pcmcia
...
chipset functions acordingly. Initialize timing registers (for now to
the slowest possible setting).
Add some debug output. XXX - clean this up.
This is not ready for prime time, but I can attach ray0 and wi0 now in my
LX.
2002-03-01 10:02:38 +00:00
fa5084d17e
Make this file compiles w/o FWNODE_DEBUG.
2002-03-01 01:01:18 +00:00
8c51a03d7e
If the upper layer says Write/Invalidate is okay, then make sure
...
it's enabled in the PCI CSR.
2002-02-28 23:52:37 +00:00
f58e1d41e1
Regen
2002-02-28 21:10:51 +00:00
f3b42effa5
Add Linksys Wireless USB Network Adapters (WUSB11, both original and ver 2.5)
2002-02-28 21:10:28 +00:00
2ba5de1eb1
Change the default Rx FIFO drain threshold to 128 bytes; this
...
reduces the likelihood of Rx FIFO overruns on machines with wimpy
PCI busses, while still allowing the interface to burst with a
reasonable size.
2002-02-28 20:08:11 +00:00
07e108c7dc
* On the DP83820, make sure to make the Tx DMA map large enough for
...
jumbo frames.
* Work around broken PXE firmware on some boards, which leave the ROM
BAR enabled even after the PXE stack has been unloaded.
* Set up the initial values for sc_tx_fill_thresh, sc_tx_drain_thresh, and
sc_rx_drain_thresh in sip_attach(), rather than in sip_init().
2002-02-28 19:10:16 +00:00
c49eaa2724
Don't use NULL for non-pointer arguments.
2002-02-28 04:49:16 +00:00
66900b849e
Regen.
2002-02-28 03:40:43 +00:00
c1670f1122
Oops, readd an ID for Rage XL which was removed in previous commit.
2002-02-28 03:39:37 +00:00
36dc3b5f36
Regen; fix for duplicate ATI Rage Pro.
2002-02-28 02:34:15 +00:00
1ce4367071
Better fix of duplicate ATI Rage Pro IDs. `_B' and `_P' mean BGA and
...
PQFP, respectively.
2002-02-28 02:32:50 +00:00
d487168d5f
PR/15754: Sean Davis: Initialize if_softc before calling the mii init
...
routines to avoid NULL pointer de-referencing in the callbacks.
2002-02-28 00:52:21 +00:00
da0af33867
Change mapping of keycode 50 to be closer to the spec.
2002-02-28 00:30:13 +00:00
27cee6c777
Regen.
2002-02-27 23:29:01 +00:00
f2afa010b1
Add some more stuff that might make Palm and Sony devices work.
...
(Gleaned from Linux.)
2002-02-27 23:00:03 +00:00
50a7e169bc
Add Palm m125.
2002-02-27 22:45:16 +00:00
fe3a97c935
regen
2002-02-27 21:01:55 +00:00
b6b3e04f66
Avoid duplicate define for ATI Rage Pro PCI
2002-02-27 21:00:28 +00:00
53e222d45c
Regen.
2002-02-27 16:38:08 +00:00
ab2517393d
Fully revise product IDs for ATI Mach64 and Rage graphics cards.
...
XXX Rage 128 not revised.
2002-02-27 16:36:41 +00:00
5d2b04bb42
Move the interrupt bailout when a cancelled ii is found.
2002-02-27 12:42:41 +00:00
5663022c32
Remove spurious splusb().
...
Lower abort hardware wait.
2002-02-27 12:12:45 +00:00
71b05541b5
Initial layout for SBP2 routines. Mainly just the code yanked from fwnode.c
...
so it's not lost.
2002-02-27 05:12:11 +00:00
6cf5c78fa4
Basic prototype/beginning of firewire disk support using sbp2/scsi. Commiting
...
to have a baseline.
2002-02-27 05:11:27 +00:00
40cba409bb
Change/pretty up some debugging info.
...
Also, add unit location fields to the ROM image. The p1212 spec requires
unit locations if you have 2 or more unit directories which is the case for
ipv4 and ipv6 compiled into a kernel.
2002-02-27 05:09:15 +00:00
f04610f130
Move definition of if_fw fifo location to ieee1394reg.h as it's needed for
...
filling in unit location in the rom.
XXX: This all is really too welded together. The if_fw code should be
decoupled from this and simply be handed a method by which it can provide
the config rom back to the main code.
2002-02-27 05:07:25 +00:00
d455d6316d
Add 3 more macros for extracting info from bus info block
2002-02-27 05:05:39 +00:00
ea96c58797
Change length values to u_int32_t
2002-02-27 05:04:28 +00:00
ed05bf459e
Rototill fwnode.c to rely on the p1212 routines to parse and validate the ROM
2002-02-27 05:02:25 +00:00
8140d3a6bb
Note done sections related to fwnode/ieee1212 stuff
2002-02-27 05:00:55 +00:00
2d478bd8d8
Move over from std to here
2002-02-27 05:00:00 +00:00
524644efa7
SBP is a firewire/ieee1394 specific protocol, not a generic standard. Move this
...
to the ieee1394 directory
2002-02-27 04:59:29 +00:00
b1eeba63dc
Initial checkin.
...
A framework for parsing p1212 compliant ROM's and returning a tree that
describes it. Include routines for searching the tree, walking it to
apply functions against nodes and printing out the tree.
Also provide a utility routine to take all the unit dirs present in a ROM,
loop against them and present them to config_found to configure all possible
sub devices.
2002-02-27 04:58:50 +00:00
00ea0581b5
Add a few more extraction macros and begin the ALLOW list of flags for
...
overriding specific checks in p1212_parse
2002-02-27 04:55:58 +00:00
0357a44190
Avoid a race condition spotted by UCHIYAMA Yasushi <uch@vnop.net>.
2002-02-27 01:30:50 +00:00
5d823a2299
Start of mi /dev/{mem,kmem,zero,null} driver. We add an ioctl entry, because
...
we don't want to throw an error when FIONBIO is requested. We also allow
FIOASYNC clear.
2002-02-27 01:16:14 +00:00
cc72a54933
Add constraints to allow for disabling PS/2 mouse powerhooks. As requested
...
by Chuck Cranor.
To disable powerhooks with the pms and pmsi drivers, respectively:
options PMS_DISABLE_POWERHOOK
options PMSI_DISABLE_POWERHOOK
2002-02-27 00:30:07 +00:00
4283f00882
1. Change equalizer (treble, bass) to be ``flat'' if the values set at
...
the center position (128), so as to be compatible with other drivers.
The equalizer is enhancement only, and the values < 128 don't take
any effect.
Yeah, this causes spec change....
For equalization.treble and equalization.bass, the relation between
old and new value is
new_value = (old_value / 2) + 128.
(Note this does not apply to equalization.surround.)
2. Support ++ and -- of mixerctl(1) for stepping volume variables.
3. Fix problem where the chip is not powered up
when the mic input is unmuted.
2002-02-26 14:57:36 +00:00
b57f5ccbca
in esa_resume, call esa_codec_reset; makes it much more happy after a
...
suspend on my O500 (snatched from FreeBSD)
2002-02-26 11:05:05 +00:00
ae9f835cf2
A small fix for FreeBSD.
2002-02-26 10:27:49 +00:00
2c66bc238b
Fix a typo that prevented timeout in control requests from working.
...
Spotted by Alfred Perlstein <bright@mu.org>.
2002-02-26 10:22:48 +00:00
2622b21584
use #ifdef WI_DEBUG instead of #if WI_DEBUG
2002-02-26 09:29:18 +00:00
44ab750650
avoid walking full length of unknown stats structure.
...
this partially addresses pr14385.
there is still a byte swapping bug retrieving the
stats structure. Since both the type and the length
are incorrectly swapped, we would timeout while reading
an extra long section (caused by the byteswapped length)
of garbage data.
turning on WI_DEBUG now just reports the unknown info type
which can be seen to be obviously incorrectly swapped
on macppc
2002-02-26 09:18:54 +00:00
ab875c9c5c
Some minor fixes from FreeBSD.
2002-02-26 02:00:16 +00:00
97e6cc6f72
Fix an uninitilized request. From Alfred Perlstein <bright@mu.org>.
2002-02-25 22:39:01 +00:00
f8e0ee9efc
Fixes a bug in argument passing to ntp_adjtime1. patch submitted by
...
paul@Plectere.com (see kern/15519)
2002-02-25 21:16:36 +00:00
9e8cc352a9
Update datasheet URLs.
2002-02-25 17:37:47 +00:00
3f78ffdeca
Argh, dont reference any wscons parts in files.dec yet.
2002-02-25 17:11:17 +00:00
f89bb3064e
Move the dz driver to dev/dec, since it can be shared with pmax.
2002-02-25 14:58:06 +00:00
306aa99ff8
Some portability improvement.
...
Add define for usb.h version.
2002-02-25 00:46:37 +00:00
a66008a0b5
Add WSMOUSE_TYPE_MAXINE.
2002-02-24 02:01:40 +00:00
764103c61c
Regen: add IBM 82660 PowerPC to PCI Bridge and Memory Controller.
2002-02-24 01:44:00 +00:00
914e8aef4a
Add IBM 82660 PowerPC to PCI Bridge and Memory Controller.
2002-02-24 01:42:36 +00:00
c4dbe1a160
Allow MD code to provide functions for reading/writing NVRAM/RTC
...
locations. If passed NULL, the old behaviour using bus_space_{read,write}_1()
is used. Otherwise, all access to the chip goes via the MD functions.
This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not
directly addressable.
2002-02-23 17:18:54 +00:00
b13d5cf210
Fix typo in previous.
2002-02-23 14:05:02 +00:00
8af2b425a2
Add a missing call to isapnp_config().
...
Do not hardcode IST_EDGE, use the type from the attach args.
Noticed by Christos Zoulas.
2002-02-22 21:26:47 +00:00
df34bbcc7a
Regen
2002-02-22 17:13:46 +00:00
5cdee96e49
PR/15701: Mike Wlodarczyk: ISAPNP data for another SupraExpress 56I SP V.90
2002-02-22 17:13:26 +00:00
287977b3d2
Replace one of two divide ops with an AND when calculating the XYMASK
...
address.
2002-02-22 16:05:27 +00:00
91f80cf3fc
Implement F/W crashdumps for 2200 && 2300 cards (kernel compile option).
...
Distinguish between 2312 and 2300 cards (they *are* different). Enable
RIO (Reduced Interrupt Operation) for the LVD cards (hey- I've seen
batched completions of the 30 commands at a time with this,....)...
If we get a Port Logout on local loop topologies, we have to force the
f/w to log back in. The easiest way (for us) to do this is to force
a LIP. This also will wake up the disk that probably just had a f/w crash.
Implement mailbox 'continuations'- this allows interrupts to re-drive
a mailbox command if it's one that just essentially repeats the previous
mailbox command (e.g., f/w download). This saves a boatload of sleep/wakeup
twitches.
If we're not a 2300 and we're about to return with a 'bogus interrupt'- check
the semaphore register to be non-zero at all and outgoing mailbox 0- this
seems to be where some of the lost ISP1080 commands came from.
2002-02-21 22:32:40 +00:00
e9dc13b243
As discussed with Jason Thorpe: while the `cacheline_size\' argument is
...
a byte-size quantity, the CacheLine Size configuration register specifies
the system cacheline size in units of 32-bit words; per PCI Local Bus
Specification, rev. 2.1, section 6.2.4.
2002-02-21 20:22:48 +00:00
147331af13
Fix broken indentation.
2002-02-21 05:30:30 +00:00
b0a8050029
regen: Use BCM prefix instead of SB prefix in previous.
2002-02-21 00:00:28 +00:00
1d958329b8
Use BCM prefix instead of SB prefix in previous.
2002-02-20 23:59:58 +00:00
1df79a37a8
regen: Add the SiByte/Broadcom SB1250 PCI and LDT bridge IDs.
2002-02-20 23:53:32 +00:00
034caadcd2
Add the SiByte/Broadcom SB1250 PCI and LDT bridge IDs.
2002-02-20 23:53:01 +00:00
ee0bfb00bf
regen: Rename the SIBYTE entry to "Broadcom Corp. (SiByte)".
2002-02-20 23:46:55 +00:00
e4007a266b
Rename the SIBYTE entry to "Broadcom Corp. (SiByte)".
2002-02-20 23:45:50 +00:00
0db3eee7bb
Add quirks for Minolta Dimage X.
2002-02-20 22:28:54 +00:00
dd0cea6baa
Regen.
2002-02-20 22:28:20 +00:00
b1b2559c84
Add Minolta Dimage X (very nifty!).
2002-02-20 22:27:54 +00:00
6728d906e9
Prefix structure members to protect them against clashes with eg. c++ keywords.
...
Suggested by Alfred Perlstein, from FreeBSD, ok'd by augustss
2002-02-20 20:30:12 +00:00
724e595530
Regen: Add the Concord Camera Eye Q 3x.
2002-02-19 14:13:01 +00:00
63e8b06dff
Add the Concord Camera Eye Q 3x.
...
Reverse the Yamaha and Yano entries so they're in alphabetical order.
2002-02-19 14:12:02 +00:00
72359ec83c
Fix indentation botch.
2002-02-19 14:07:26 +00:00
d76634e057
Update 2300 firmware to latest release level.
2002-02-19 01:38:04 +00:00
30981eee37
Add ulinear8 to/from slinear16 transforms.
2002-02-18 19:50:03 +00:00
e3f53c00e2
fix indent
2002-02-18 14:45:56 +00:00
1486b3d395
add a missing splx in the case of error.
2002-02-18 14:41:50 +00:00
a10cd2d55f
Print the tcode in hex when debugging like all other debug statements
2002-02-18 09:10:44 +00:00
d2be07c591
Shared ebusvar.h for sparc and sparc64.
...
NB: ebus_attach_args member names are singular to be consistent with SBus.
sparc64 version uses plural, so update sparc64 drivers when converting them
to use this shared header
2002-02-18 04:44:41 +00:00
ea8decf111
Add DMA definitions.
...
Add some sparc32 related comments.
2002-02-18 03:43:29 +00:00
0786bd90ab
Add another tlp card (found by trial and error).
2002-02-17 21:21:58 +00:00
c8b7c9e3ba
Regen.
2002-02-17 21:21:15 +00:00
9c5176e112
Add a 10/100 Ethertnet card from Hawking.
2002-02-17 21:20:46 +00:00
00994a7564
Add prototypes for static functions.
2002-02-17 20:08:34 +00:00
387b55cc79
Protect calls to wi_cmd() from callout handlers by proper splnet()/splx()
...
pairs. Without this, the interrupt handler will steal the "command completed"
status and wi_cmd will busy loop until it times out.
Add some error output to make failure modes like this more prominent.
This should fix PR 14559.
2002-02-17 19:24:18 +00:00
58ff6aaf22
Regen: Add Genesys Logic GL641USB CompactFlash card reader.
2002-02-16 18:18:06 +00:00
bfdbf84cf8
Add product ID for the Gensys Logic GL641USB CompactFlash card reader.
2002-02-16 18:17:35 +00:00
3285e44973
Regen: Add the Elan SC520 System Controller.
2002-02-16 16:36:36 +00:00
1b6c81cacd
Add the AMD Elan SC520 System Controller.
2002-02-16 16:35:48 +00:00
77beb7e099
Use the correct years for copyright.
2002-02-14 21:58:30 +00:00
46ffcfbf95
uaudio_set_params() for mulaw:
...
Give priority to 16bit again in the case the device has no hardware
support for mulaw.
2002-02-14 12:55:51 +00:00
4cb7d87b12
Oops, I messed up the last commit, try again.
2002-02-14 12:52:01 +00:00
4ee45f845f
add support for Adaptec ANA-69xx multi-port cards.
2002-02-14 07:59:55 +00:00
b744097a5f
allow writing to write-only mappings. fixes PR 3493.
2002-02-14 07:08:02 +00:00
076c2a2de8
Make fixed rate codecs work. From Tsuyoshi Iguchi in kern/15606.
2002-02-14 03:22:36 +00:00
75777b6533
make the driver even more silent; print state change messages only if IFF_DEBUG.
2002-02-13 22:06:17 +00:00
08bde987bb
Separate out devices common to many Motorola mvme boards (68k, 88k and ppc)
...
in preparation for future mvmeppc and mvme88k ports.
This needs a bit if tidying up to make it trully shareable, which will
happen as the new mvme ports are added.
2002-02-12 20:38:43 +00:00
8c75e475ba
Separate out devices common to many Motorola mvme boards (68k, 88k and ppc)
...
in preparation for future mvmeppc and mvme88k ports.
This needs a bit if tidying up to make it trully shareable, which will
happen as the new mvme ports are added.
2002-02-12 20:38:41 +00:00
5bd17a1271
Separate out devices common to many Motorola mvme boards (68k, 88k and ppc)
...
in preparation for future mvmeppc and mvme88k ports.
This needs a bit if tidying up to make it trully shareable, which will
happen as the new mvme ports are added.
2002-02-12 20:38:09 +00:00
a2803fa798
split the channel stuff into record and play parts, so that this driver is
...
full duplex, independent
2002-02-12 19:52:43 +00:00
f1a2d1c420
Remove obsolete prototype for "udsbr_search".
2002-02-12 10:51:49 +00:00
253423f1c7
Add OnSpec PC-Card reader
2002-02-11 21:13:35 +00:00
59ff2c4198
Regen
2002-02-11 21:07:50 +00:00
c381ca9def
Add Datafab MD1-II
2002-02-11 21:05:34 +00:00
6e320d03b8
Undo previous that incorrectly byte-swaps stamps for little endian
...
machines when RI_BSWAP is *not* set. Redo my original fix to directly
build stamps in desired endianness instead of calling bswap32().
2002-02-11 20:50:58 +00:00
db48366eb0
Forgot to mention two reserved bits.
2002-02-11 19:01:28 +00:00
4691174484
Move the declaration of pci_conf_hook down to <machine/pci_machdep.h>;
...
a port may choose to implement it not as a function but i.e. as a
pci_chipset_tag_t function vector.
2002-02-11 17:24:00 +00:00
490beda381
Remove an accidental change from last commit.
2002-02-11 15:20:23 +00:00
319f13f6ef
Give usbd_do_request_flags() an extra argument for the timeout.
2002-02-11 15:11:49 +00:00
5f87e5a984
Regen.
2002-02-11 15:00:35 +00:00
cf31e1b945
Add a bunch of mass storage devices.
2002-02-11 15:00:17 +00:00
e644076000
A little const poisoning. (From FreeBSD.)
2002-02-11 12:42:48 +00:00
a91e01c9ee
s/ab_csr/ab_addr/ so it compiles again.
2002-02-11 12:32:43 +00:00
6f566032d7
Whitespace changes.
2002-02-11 11:42:16 +00:00
0e66a32e2c
Switch to new abort mechanism.
2002-02-11 11:41:30 +00:00
f8204d29e1
Switch to the same abort mechanism as in [eo]hci; it should be more
...
robust.
2002-02-11 11:40:33 +00:00
9baadd8ee5
"doesn't" should have an 's'.
2002-02-11 11:19:26 +00:00
b231fd7631
explicitly, with two l.
2002-02-11 11:01:52 +00:00
66df0333a1
s/seperate/separate/
2002-02-11 10:44:38 +00:00
f1274a71dc
Some minor fixes from FreeBSD.
2002-02-11 10:09:14 +00:00
1b221b1c9b
Some updates for FreeBSD.
2002-02-11 10:04:28 +00:00
c1b55b61ac
uaudio_chan_set_param:
...
Take care of param->factor.
uaudio_set_params:
Fix a problem of precision matching for mulaw/alaw with 16bit.
2002-02-11 07:10:36 +00:00
3e9025cfbf
Remove a pretty much useless autoconfiguration message.
2002-02-10 23:28:27 +00:00
5c800297c6
Match ICS 1893.
2002-02-10 17:09:41 +00:00
c48956e61c
Regen [ICS 1893]
2002-02-10 17:09:08 +00:00
9f4c1b7c26
Add ICS 1893
2002-02-10 17:08:24 +00:00
6d119b5202
pcmcia -> pci in comment.
2002-02-10 12:26:23 +00:00
80b8890265
point sequioa.h to new location
2002-02-10 11:48:56 +00:00
4653bffb03
uaudio_set_params:
...
Use slinear16_to_mulaw_le() if ULAW recording is requested and the device
supports neither signed 8bit nor unsigned 8bit and supports 16bit.
2002-02-10 06:37:45 +00:00
29b73c4025
Add slinear16_to_mulaw_le().
2002-02-10 06:27:06 +00:00
8edba68a05
Fix problems associated with the SiS 635/735 on-board Ethernet,
...
from Stephen Degler <sdegler@degler.net>, port-i386/15261.
2002-02-09 21:04:02 +00:00
b2666184d8
delete '#if 0' codes.
2002-02-09 15:20:49 +00:00
0f5d20e20b
- rename struct iha_scsi_req_q -> struct iha_scb
...
- reorder some functions
- some more cosmetics
2002-02-09 15:13:00 +00:00
c57778753f
regen
2002-02-09 09:21:24 +00:00
7236711b7c
Add HP Scanjet 5400C
2002-02-09 09:20:44 +00:00
5e1dc96b6e
| Module Name: syssrc
...
| Committed By: uwe
| Date: Thu Jan 31 11:18:08 UTC 2002
|
| Modified Files:
| syssrc/sys/dev/rasops: rasops8.c
|
| Log Message:
| Honor RI_BSWAP.
Endian fix.
2002-02-08 14:55:23 +00:00
269d70f6e7
Dup 53c1010-33 entry for 53c1010-66 (PCI_PRODUCT_SYMBIOS_1010_2).
2002-02-08 04:07:34 +00:00
660b4087dc
Add quirks for Minolta S304.
2002-02-07 13:53:14 +00:00
53a6c27b2e
Add quirk for devices without Get Max Lun.
2002-02-07 13:52:54 +00:00
86c1274c84
Regen.
2002-02-07 13:52:27 +00:00
c801ef4f0d
Add Minolta Dimage S304
2002-02-07 13:52:08 +00:00
d76f24be37
OnSpec doesn't like Mode Sense.
2002-02-07 13:02:26 +00:00
09f2c3182a
Regen.
2002-02-07 13:00:37 +00:00
29f28f51f0
Add OnSpec disk controller.
2002-02-07 13:00:13 +00:00
7555da491d
Turn on mii on 3C980CTXM
2002-02-07 01:32:19 +00:00
8c1a2832b7
Remove inclusion of unused machine/cpufunc.h, it doesn't belong here anyways.
2002-02-06 14:50:42 +00:00
552bb9895a
TAB/space cosmetics
2002-02-06 12:43:05 +00:00
94a482c8a0
Fix a blatant inconsistency in PCI_PRODUCT handling.
2002-02-05 01:51:51 +00:00
956ac1ab10
Regen.
2002-02-04 16:57:57 +00:00
1c782b74b1
Add some more product ID's for ATI Mach64 graphics cards.
2002-02-04 16:56:49 +00:00
425a197cab
Remove chip description which is also mentioned in dev/ic/rtl81x9.c.
2002-02-04 16:33:15 +00:00
f323b44887
remove include of <machine/cpufunc.h>, it's not used here
...
fixes compile (at least) on arm32
2002-02-03 23:32:10 +00:00
d70864a866
make this compile:
...
include dev/ic/joyvar.h instead of the now non-existant arm32/isa/joyvar.h
2002-02-03 23:17:58 +00:00
7f01f1dd6b
Some white space fixes from FreeBSD.
2002-02-03 18:15:20 +00:00
edd781367c
Change some wording on fw's to make it more logical sounding.
2002-02-03 07:29:14 +00:00
c4bd465ed5
Add IEEE1394_MAX_REC macro
2002-02-03 07:25:11 +00:00
715f7380b0
Add an unreg function.
...
Add a uio struct to the abuf so direct uio supporting calls can be setup.
Change all refs of csr in the abuf to addr as thats it's real function.
2002-02-03 07:24:48 +00:00
1ff5e232ba
add missing #include for SUN4 options
2002-02-03 05:53:28 +00:00
f32b3f4f89
Reduce the massive code duplication regarding joy(4). Split it into
...
MI and MD parts, and make ISA/ISAPNP/PCI joy(4) attachments MI.
2002-02-02 18:37:38 +00:00
34b1784adf
enable the joystick port on attach, too
2002-02-02 18:10:28 +00:00
8cfcd66841
Regen; add Initio INIC-850/1060 SCSI and variants.
2002-02-02 11:58:28 +00:00
2f9238db1b
Add Initio INIC-850/1060 SCSI and variants.
2002-02-02 11:56:43 +00:00
8c857ca266
Regen; add HiNT Corp. HB1 PCI-PCI bridge.
2002-02-02 11:30:04 +00:00
3800e16a5a
Add HiNT Corp. HB1 PCI-PCI bridge.
2002-02-02 11:28:46 +00:00
6462ad0b3c
Fix typo so that 48kHz can be set. From Stephen Ma in kern/15456.
2002-02-02 11:18:42 +00:00
e16f901581
Make auich support variable rate codec, and suspend/resume.
...
From URA Hiroshi in PR kern/15431 (partly from OpenBSD).
2002-02-02 11:13:44 +00:00
5306945459
Add entry for ELECOM LD-USBL/TX
2002-02-02 06:04:46 +00:00
604899daad
regen
2002-02-02 06:02:26 +00:00
aa93973989
Add ELECOM LD-USBL/TX (ethernet adapter)
2002-02-02 06:00:56 +00:00
c0530aa288
Regen.
2002-02-02 02:29:49 +00:00
9df6e6d623
Add PhotoClip USB Camera (from FreeBSD).
2002-02-02 02:29:28 +00:00
a4cfa723ac
regenerate: fix typo in card name string.
2002-02-01 22:04:02 +00:00
0b57fdbf9d
Don't display some (non-exceptional) events unless IFF_DEBUG is set.
...
I have a card that fires a continuos stream of "connected" events (one
every 30 seconds) while it hasn't found any peer.
2002-02-01 13:35:41 +00:00
48c749a49a
fix typo
2002-01-31 14:27:29 +00:00
13d8e231d8
Fix KBS_WARM comment.
2002-01-31 13:25:20 +00:00
0778a707e9
Honor RI_BSWAP.
2002-01-31 11:18:07 +00:00
30f44eaa28
Add an entry for NEC 9801N_J12, which is an OEM of IBM infomover.
...
PR #14084 .
2002-01-31 08:45:14 +00:00
5d591d8020
White-space niggle.
2002-01-31 06:37:30 +00:00
haya