e96035c57c
Tsubai has convinced me that openpic_init() should remain machine-dependant
...
as the details might differ between archs, and passing the various options
leads to some clutter.
2001-02-05 19:22:23 +00:00
40c4d1e0c3
Rename the CLI/STI/ECLI/ESTI macros to more descriptive names,
...
and add comments to describe exactly what they do (because it's
not totally obvious at a glance, due to the number juggling necessary
to frob the correct bits in SR):
CLI -> EXCEPT_DISABLE (sets SR.BL)
STI -> EXCEPT_ENABLE (clears SR.BL)
ECLI -> INTR_DISABLE (sets SR.I[0-3])
ESTI -> INTR_ENABLE (clears SR.I[0-3])
2001-02-05 18:14:42 +00:00
2cb604a22d
sync with platid_gen change.
2001-02-05 17:39:45 +00:00
c78bf4efdb
Add ipfilter, and a bunch of (commented out) network options.
2001-02-05 17:32:08 +00:00
cd5dc32000
add SH3 CCR register address define.
2001-02-05 16:51:16 +00:00
99adff7a25
Remove db_machine_init(), which was removed from mips/db_interface.c.
2001-02-05 13:34:42 +00:00
1af765a6dd
Oops, forgot this file.
2001-02-05 13:20:10 +00:00
de70ac347a
db_machine_init() is no longer needed.
...
From Shigeji Ishikawa <psybear@ogre.rim.or.jp> in port-cobalt/12123.
2001-02-05 13:18:28 +00:00
869fdfbf12
Fix typo on pci_intr_map() changes.
...
Reported by Shigeji Ishikawa <psybear@ogre.rim.or.jp> in port-cobalt/12121.
2001-02-05 13:14:21 +00:00
22a68e0e29
oops, kill some debugging messages.
2001-02-05 13:13:47 +00:00
8bc87999fc
Remove obsolete cpu_exec_ecoff_hook().
2001-02-05 13:10:07 +00:00
2d7ba2f0e7
turn off UVMHIST. turn on LKM. makeoptions DEBUG=-g
2001-02-05 12:49:11 +00:00
05752997ef
use sunos32_machdep.c on 64 bit kernels.
2001-02-05 12:47:47 +00:00
e1ac1f31b9
make sure 32 bit addresses are truncated properly.
2001-02-05 12:45:38 +00:00
f889fd6ff9
remove signal trampoline stuff since it'll never be used in the kernel.
...
clean up the ELF support.
2001-02-05 12:37:33 +00:00
5f244b1055
conditionalize the ddb hook on DDB && DEBUG_FPE rather than DDB && DEBUG,
...
since that's the condition under which we include the header file that
allows it to compile.
2001-02-05 12:35:13 +00:00
755889bc0b
clear pcb_onfault before calling uvm_fault() and restore it afterward.
...
if the fault handler generates a pagefault, we'd like to panic rather
than invoking the onfault handler.
2001-02-05 11:12:05 +00:00
09cb38f22b
expose the definitions of MIN() and MAX() in sys/param.h to the kernel
...
and use those in favor of a dozen copies scattered around the source tree.
2001-02-05 10:42:40 +00:00
db133b2424
Add signal trampoline for 64-bit svr4 emulations.
2001-02-05 06:56:45 +00:00
d0bc7a3c3d
s/unix/unit/ for ld* on mlx* :-)
2001-02-05 04:16:52 +00:00
ece49e13a9
Back out last change. m68k.h is now in cpu.h (which got updated in between
...
my noticing this problem here on a sun3).
2001-02-04 23:53:31 +00:00
2c1941b3eb
Giant update from Michael Kukat (michael@unixiron.org).
...
Fixes support for:
MicroVAX 3100m90
MicroVAX 3100m95
VAX 4000/100 (tested)
VAX 4000/105A (tested)
VAX 4000/108
VAX 4000/400 (tested)
VAX 4000/500 (tested)
VAX 4000/600
2001-02-04 20:36:26 +00:00
c8ef73b71f
Support for the Motorola Sandpoint reference platform using the
...
MPC8240 processor module. See the README for more information.
2001-02-04 18:32:10 +00:00
863805b4d8
Correct previous. Call openpic_init() correctly.
2001-02-04 17:46:33 +00:00
522ec180e9
Build with -Wall -Wetc.
2001-02-04 17:38:10 +00:00
e560b86e0b
Adapt to new openpic_init() parameters.
2001-02-04 17:36:08 +00:00
65e351a124
keep joystick lines together
2001-02-04 17:36:03 +00:00
ace7a75bd5
Remove dependancy on ICU_LEN m.d. define. Thanks, Tsubai.
2001-02-04 17:35:28 +00:00
cbb39b8875
defopt openpic
2001-02-04 17:34:11 +00:00
0ce1220246
For now, all macppc will get OpenPIC
2001-02-04 17:33:42 +00:00
8d75ab98d3
Add a driver for the Mylex DAC960 family (including DEC SWXCR).
2001-02-04 17:05:11 +00:00
7ce76feecc
In the LKM section add some things the LKM's need (since they aren't
...
defining _SUN3_ or _SUN3X_ generally to pickup the full vmparam.h
Added MAXDSIZ (set to sun3's limit) and VM_NFREELIST
2001-02-04 10:16:03 +00:00
36f1b05b1f
Include m68k/m68k.h to pickup definition for fputype.
2001-02-04 10:13:08 +00:00
e1fb29e236
Make targets proper so this builds both as a make with no args, make all
...
or make dependall (without the latter snapshot builds break).
Also, change the build layout for the 2 standalone objs.
XXX - Add them to LOBJS. (We're not building lint libraries, but having them
in LOBJS and MKLINT=no results in objects building anyways. This needs to be
cleaner but nothing in the standard mk files jumps out as "other object files")
2001-02-04 08:59:57 +00:00
17a976fa32
Make targets proper so this builds both as a make with no args, make all
...
or make dependall (without the latter snapshot builds break).
Also, add udp.c into the SRCS list. rpc.c calls routines from it.
2001-02-04 08:57:52 +00:00
243eb5180a
Make targets proper so this builds both as a make with no args, make all
...
or make dependall (without the latter snapshot builds break).
2001-02-04 08:57:21 +00:00
596e28b8c2
Marge hpcmips/conf/platid.def and hpcsh/conf/platid.def
...
into hpc/conf/platid.def.
2001-02-04 05:19:14 +00:00
20c4de8a40
Move cachectl1() declaration from sun3/machdep.h to include/cpu.h;
...
it is refered by sys/compat/linux/arch/m68k/linux_machdep.c.
XXX: all declarations in machdep.h should be moved into cpu.h?
2001-02-04 01:31:54 +00:00
a031d05fa8
Add -D__m68k__ to XDEF.
...
It is required by sys/compat/linux/common/linux_exec.h.
XXX: -undef is still required?
2001-02-04 01:26:44 +00:00
0d6830073e
Added subunit scan.
2001-02-03 23:25:51 +00:00
3f60497b85
Increased HZ to 100.
2001-02-03 23:24:30 +00:00
e36ad02480
gspa can directly create the C language array.
2001-02-03 20:23:59 +00:00
74591d814f
Add a definition of MID_MACHINE -- kernel cores still need it.
2001-02-03 17:18:30 +00:00
4f047d1990
Bring FPU probe code from atari/fpu.c and remove unneeded includes.
2001-02-03 14:30:42 +00:00
b26a441f6a
Remove reg_dump() declaration, which is in <m68k/m68k.h>
2001-02-03 13:02:20 +00:00
8ae17a2c61
Use macro in <m68k/m68k.h> for cputype and mmutype.
2001-02-03 12:59:48 +00:00
497bb4f2ea
Remove declaration of copypage() and zeropage(); they are in <m68k/m68k.h>
2001-02-03 12:57:05 +00:00
5f9454752b
m68k/m68k.h is now pulled via machine/cpu.h.
2001-02-03 12:55:35 +00:00
fdddc67af0
Remove declaration of getdfc(), getsfc() and fputype.
...
They are in <m68k/m68k.h>
2001-02-03 12:53:23 +00:00
31a0a141cb
Include <m68k/m68k.h> to use m68k common definitions.
2001-02-03 12:50:53 +00:00
a3cd82caf9
Remove declaration of cold; it's in <sys/kernel.h>
2001-02-03 12:46:04 +00:00
53e0e33ba4
Remove some of broken cf_unit usage.
2001-02-03 12:40:58 +00:00
92fd3fa589
Initial, still incomplete wscons support by Jukka Andberg, PR 11068
2001-02-02 21:52:11 +00:00
c8cdb12913
Add some comments about P/USEG
2001-02-02 18:25:04 +00:00
fbd66cd154
Add COMPAT_15
2001-02-02 10:53:48 +00:00
dcdef16dcd
Copyright year.
2001-02-02 08:31:04 +00:00
c084c19f60
add "wd" to chrtoblktbl
2001-02-02 07:39:28 +00:00
2a9fceab8d
enable the kbd/ms. enable some compat options for compat_sunos
2001-02-02 07:33:42 +00:00
9954eaa78b
include compat/sunos32/sunos32.files
2001-02-02 07:32:45 +00:00
04cb3c57d6
bump NMBLUSTERS now this machine has NFS server tasks.
2001-02-02 07:32:20 +00:00
5592504080
Fixed type mismatch in debug output...
2001-02-02 06:27:44 +00:00
9150a401ba
No longer needed
2001-02-02 06:12:34 +00:00
044caccfff
Split OpenPIC support into powerpc so ports only need minimal custom
...
configuration. openpic_init() now takes a single argument that is the
base of the OpenPIC register space.
2001-02-02 06:11:52 +00:00
4fab177f7e
Don't make the reporting of the keyboard type a parenthetical.
2001-02-02 03:09:16 +00:00
2ae9f715f6
Report the VGA/NTSC RGB/composite mode of the display.
2001-02-02 03:07:29 +00:00
ef2315d256
Rewrite how mod/ref emulation is done. In particular, make
...
modified attribute checking actually work. Previously, a
page could be reported as modified even if it wasn't! This
is very bad, and e.g. caused the VM system to attempt to
"clean" pages of read-only files.
Only lip-services is paid to referenced attribute emulation.
This could be improved.
2001-02-02 02:28:18 +00:00
50c553e643
Announce page-size to the VM-system. Thanks to Izumi Tsutsui for pointing
...
this out.
2001-02-01 21:22:55 +00:00
6195ca3474
Add some info to the dmamap_sync assertion messages.
2001-02-01 19:56:44 +00:00
fc7cc52392
Fixed the last raw accesses to use bus_space. Also added DMA mem size field.
2001-02-01 19:35:04 +00:00
3d1167e274
Fix fallout from lastest tty changes.
2001-02-01 08:59:45 +00:00
9b569c3abe
No longer update the PAGE_* variables. They have turned into compile time
...
constants.
2001-02-01 08:58:03 +00:00
94ebf6d0d7
Update for the install floppy:
...
- Add newer devices (wscons etc.)
- Add -mmemcpy to COPTS
- Reduce maxusers
- Remove KERNFS
- Disable some COMPAT_* options
- Add MEMORY_DISK_SERVER=0
- Enable options NFS_V2_ONLY and VNODE_OP_NOINLINE
2001-02-01 06:23:54 +00:00
f436156dd7
Use the BOLD8x16 font for the console, and remove the RCONS_16BPP
...
option (no longer needed).
2001-02-01 01:27:59 +00:00
f16d219c1b
Config glue for rasops/wsfont.
2001-02-01 01:27:04 +00:00
fbfc0872d8
New PowerVR display driver, based on the TURBOchannel "cfb"
...
driver by Tohru Nisimura (a very good framework for a FB driver,
BTW!), using bits of Marcus's original driver for the hardware
access.
The main advantage of this version is that is uses rasops (which
is faster than the rcons stuff) and wsfont, so you can select the
console font in the kernel config file. Using the BOLD8x16 font,
you get an 80x30 console (vast improvement compared to the Gallant12x22
font).
2001-02-01 01:25:56 +00:00
41b0cdf3e5
Add configuration info for the SEGA Broadband Adapter,
...
and enable the NFS file system and DHCP NFS root support.
2001-02-01 01:09:12 +00:00
26cf6921bc
GAPS PCI bridge support. Low-level stuff from Marcus, bus_dma
...
implementation from me.
2001-02-01 01:04:55 +00:00
e2c0abd45d
Implement {read,write}_region_1, and sprinkle some __volatile
...
around for sanity.
2001-02-01 01:01:50 +00:00
f2358f8d43
Basic G2 locking implemented.
2001-01-31 21:58:37 +00:00
d729ba2b1f
Support for masking/unmasking IRQ 11 (used by the G2/GAPS bridge).
...
From Marcus.
2001-01-31 18:44:07 +00:00
a42d651b53
G2/GAPS PCI configuration glue, for the Broadband Adapter.
2001-01-31 18:39:46 +00:00
9342211052
PCI glue, from Marcus.
2001-01-31 18:38:26 +00:00
7135afee31
New bus_space and bus_dma framework, based on the Alpha implemetation.
2001-01-31 18:37:11 +00:00
63885cd020
G2 bus support. Low level stuff by Marcus, bus_space stuff by me.
2001-01-31 18:33:24 +00:00
25a91d5c1e
_bus_dma_valloc_skewed(): return a vaddr_t, not error codes; make missing
...
boundary check return an error, so the caller can decide how to respond.
2001-01-31 15:17:42 +00:00
c625c7ee25
Set the keyboard layout based on what type of keyboard
...
we probe, defaulting to Japanese if we don't know what
kind of keyboard we have.
XXX This should be done differently, if we ever want to
support multiple keyboards.
2001-01-31 03:21:03 +00:00
37aca7f3f0
Add a US keyboard map. This may need to be reworked, as this
...
uses the Japanese keyboard map as the base.
2001-01-31 03:19:50 +00:00
b81a17e100
Make the "maple" bus a direct config bus. Now, when a device is
...
not configured into the kernel, you know about it, e.g.:
Dreamcast Controller at maple0 port 0 not configured
2001-01-31 00:14:29 +00:00
5c8624a602
Recognize the US keyboard.
2001-01-31 00:08:35 +00:00
d3545308ee
add umidi.
2001-01-30 23:32:34 +00:00
677243711e
Add a version file and print version strings generated by newvers_stand.sh.
2001-01-30 14:29:47 +00:00
9af4874133
Umm, fix botch in the previous;
...
include bsd.own.mk at the top, and include bsd.prog.mk at the bottom.
2001-01-30 14:21:49 +00:00
75e4c0c1be
- bzero() -> memset()
...
- Remove unneeded includes
- WARNSfy
2001-01-30 14:11:00 +00:00
85e5565f13
Remove (unused) -DBOOT_DEBUG.
2001-01-30 12:48:34 +00:00
2b258b5e2b
Include bsd.prog.mk at the top to pull in ${PRINTOBJDIR}.
2001-01-30 12:42:43 +00:00
61831529f2
add some macros for 8bit PCMCIA access
2001-01-30 04:15:10 +00:00
e0b71cc821
fix last commit.
2001-01-30 03:01:45 +00:00
e094a52b1f
fix pmap_* arguments when SH4_PCMCIA is defined.
2001-01-30 02:39:57 +00:00
69ababe7ba
more use _C_LABEL()
2001-01-30 01:32:56 +00:00
14bda6deb9
use macro for CCR register
2001-01-29 22:19:19 +00:00
9f82193c0e
ignore garbage left in registers by some APM bios (IBM thinkpad) when
...
event is a duplicate.
gets rid of annoying "APM get event: unknown error code (0x530b)" messages.
PR#12067 (YAMAMOTO Takashi)
2001-01-29 19:26:36 +00:00
dcee338286
Fix y2001 problem in the initial read of the RTC.
2001-01-29 08:32:23 +00:00
67c95e9ab7
remove old platid_gen
2001-01-29 04:23:01 +00:00
6d444f5960
kill the ad clause in my license.
2001-01-29 01:37:56 +00:00
a9cd6b907b
Performance hack.
...
Mainly for the Neptune-X Ethernet adaptor,
and improves ftp(1) speed by ~10%.
get: 219 KB/s -> 246 KB/s
put: 226 KB/s -> 247 KB/s
(X68030, MC68030 25MHz)
2001-01-29 01:09:29 +00:00
6cec6799ac
SIR_CLOCK is gone.
2001-01-28 22:31:53 +00:00
5d4912dc4b
Add NetBSD rcsid, clean up comments.
2001-01-28 22:18:17 +00:00
f7aa87a4a5
Jens Schönfeld seems to recall the name is ISDN link.
2001-01-28 21:43:38 +00:00
e4d9af4b42
A bunch of new CPUs that are supported, from Michael Kukat
...
(michael@unixiron.org ). Among them are 4000/400, 4000/500 and 4000/105A.
2001-01-28 21:01:52 +00:00
5538893eda
sun4_dmamap_load(): Check if boundary condition can be satisfied instead
...
of panicing blindly.
2001-01-28 20:48:31 +00:00
747983bb5b
Fix late "constifying" in ddb.
2001-01-28 20:47:45 +00:00
630d0523f6
These are not used anymore.
2001-01-28 20:04:50 +00:00
8032849729
Rename dz_ibus to dz_vsbus.
2001-01-28 19:26:34 +00:00
17b8c0e553
setup platid and config_hook.
2001-01-28 03:40:25 +00:00
2f13dfd80c
s/EVBSH3/HPCSH/
2001-01-28 03:31:30 +00:00
584cfa7669
Switch to MI md_root.c.
2001-01-28 03:09:40 +00:00
37e1f36fec
add hpc dir if MACHINE is hpcmips or hpcsh.
2001-01-28 02:58:19 +00:00
6be22c0c6f
hpcmips hpcsh common files are moved to arch/hpc.
2001-01-28 02:52:15 +00:00
a7206004fc
Faster error handling for iommu_dmamap_load_raw; avoid loading the map
...
and unloading on error when we clearly can't get out without an error.
2001-01-28 01:26:57 +00:00
88fbd1edd4
Add joy at pnpbios.
2001-01-28 00:50:23 +00:00
5028590f77
PNPBIOS joystick attachment.
2001-01-28 00:37:52 +00:00
6c3bf28ffd
Fix dvma problem caused by previous. Seems like the dvma segment calculation
...
in iommu_dmamap_unload() was not quite right.
2001-01-27 03:40:39 +00:00
952413677f
add options NTP (ok-ed by thorpej)
2001-01-27 03:02:52 +00:00
facd2d0feb
Support for the Zeus Development(?) ISDN board (2189/3).
2001-01-26 21:49:04 +00:00
42c425801b
Use IOCS_S_READEXT only when reading the partition boot from
...
higher part of the disk than 0x200000.
2001-01-26 17:30:15 +00:00
9f8af7c171
Sync with sun3/machdep.c:
...
> Require the machine-dependant DDB commands to be in db_machine_command_table[]
> and link it directly to db_command_table[] so that it's not necessary
> to do this at runtime. Make db_machine_command_table[] const on all ports.
> g/c now unneded stuff, like db_machine_commands_install(), db_machine_init()
>
> Patch written by enami.
2001-01-26 16:12:12 +00:00
a85be0a99c
process_machdep.c is actually procfs_machdep.c
2001-01-26 10:31:29 +00:00
8211e0e08b
* support more than 16 ids.
...
* check the event ids are in the table.
2001-01-26 03:44:33 +00:00
18ae54300c
* renumber config_hook event type.
...
* change event id of old event type(POWERCONTROL,BUTTONEVRNT)
to same as event id of new event type(EVENT,SET,GET).
2001-01-26 03:42:30 +00:00
d2ace86ad7
Two suggestions by jhawk:
...
- be more verbose about what file is created
- adjust copied $NetBSD...$ from $ NetBSD to NetBSD.
2001-01-25 22:34:20 +00:00
3f25157bea
Add support for ISDN Surfer (ISDN only, for the time being).
2001-01-25 22:22:15 +00:00
f4eec8f31f
iommu_dvmamap_load_raw: add a check for creating maps larger than
...
expected by the creator of the dma map and fail apropriately. This
makes the syssrc/dev/pci/if_vr.c driver work.
2001-01-25 21:41:10 +00:00
f2b255d7c2
Don't use pmap_enter in vmapbuf. This is essentially a reversal of
...
revision 1.76. It avoids problems where an I/O interrupt for physio,
using a bounce buffer, would find the destination address mapped
read-only because the syncer process hit.
Suggested by Chuck Cranor.
2001-01-25 20:14:28 +00:00
08f4daf2ce
Add drivers for keyboard and mouse.
...
(but no working framebuffer yet..)
2001-01-25 14:33:28 +00:00
d0a3070c40
Generate key press event and key release event when capslock is pressed.
...
Now capslock key works correctly on X11.
2001-01-25 14:08:55 +00:00
ec35b8d060
Make output selection work -- you can use lineout now instead of the
...
internal loudspeakers.
2001-01-25 13:39:22 +00:00
b2457f9a76
Move NEWS keymap file into MI place to share with news68k.
2001-01-25 13:13:59 +00:00
7df82ad12b
Changed implementation of partitions, multisession discs now work better.
2001-01-25 01:41:47 +00:00
59d9cb6e67
Spelling police
2001-01-24 19:38:44 +00:00
5fe51991eb
Enable MFS. This will allow /dev to be built on mfs.
2001-01-24 18:08:26 +00:00
3689556739
* fix typo.
...
* change PWR_* handling to PWR_SOFT* handling, if these routines need to sleep.
2001-01-24 09:34:26 +00:00
2e9c446398
* dopowerhooks(PWR_SOFTSUSPEND) in apm_suspend().
...
* dopowerhooks(PWR_SOFTSTANDBY) in apm_standby().
* dopowerhooks(PWR_SOFTRESUME) in apm_resume().
* dopowerhooks(PWR_RESUME), dopowerhooks(PWR_STANDBY),
dopowerhooks(PWR_SUSPEND) run in splhigh() state.
These changes sync with arch/i386/i386/apm.c.
2001-01-24 09:29:25 +00:00
c97a56563e
Turn on NFS_V2_ONLY as the kernel has gotten too big for the ramdisk otherwise.
2001-01-24 06:10:09 +00:00
fbf168d909
delete unneed debug message.
2001-01-24 03:52:16 +00:00
a164b74b53
revert one of 1.34 change.
...
> * emul/mapping infomation turn to per screen.
(my misunderstanding)
currently per device.
2001-01-24 03:50:20 +00:00
4af7f46d47
* support hpcfb_show_screens()'s cb and cbarg arguments. (HPCFB_MULTI)
...
* emul/mapping infomation turn to per screen.
* rename hpcfb_check_scroll() to hpcfb_check_update(). (HPCFB_JUMP)
* rename hpcfb_scroll_update() to hpcfb_update(). (HPCFB_JUMP)
* update experimental HPCFB_JUMP codes. (but not yet fix yet)
2001-01-24 01:38:53 +00:00
917e1e8fd2
Set the palette in 4bpp modes. They still don't work right, though.
2001-01-24 00:56:29 +00:00
050769744d
cf_unit usage is now fixed.
2001-01-24 00:03:21 +00:00
3c3ed6cecd
Flush out cf_unit abuses.
...
Also, most device functions related to IRQ handling no longer take a device
pointer. We make so many assumptions about the machine's layout in irq.c that
this just seemed silly.
2001-01-23 23:58:31 +00:00
d21e15aefe
This is no longer used.
2001-01-23 23:19:45 +00:00
c59e8d1831
ANSIfy.
2001-01-23 22:59:24 +00:00
34bf08cd05
Use a permanent breakpoint to invoke DDB rather than constructing a trapframe
...
manually. Prevents the problem introduced in the trapframe unification
whereby continuing from DDB would cause a panic.
2001-01-23 22:41:16 +00:00
f32fc0fc90
Use evcnts properly for interrupt counting.
...
The architecture here follows that of the vax port -- each device has its
evcnt in its softc, but defers actually incrementing it to the IRQ
dispatcher. This way, devices can attach sub-counts (e.g. Rx and Tx counts
for Ethernet interfaces), but don't all have to have code to increment the
counters.
Drivers deliberately call evcnt_attach_dynamic() before establishing their
interrupt handler so that the establish routine can attach a parent event if
that's appropriate. At present, it isn't.
2001-01-23 22:07:59 +00:00
8c87715ce0
We abuse cf_unit. The shame!
2001-01-23 22:07:58 +00:00
616dad1a1b
Use evcnts properly for interrupt counting.
...
The architecture here follows that of the vax port -- each device has its
evcnt in its softc, but defers actually incrementing it to the IRQ
dispatcher. This way, devices can attach sub-counts (e.g. Rx and Tx counts
for Ethernet interfaces), but don't all have to have code to increment the
counters.
Drivers deliberately call evcnt_attach_dynamic() before establishing their
interrupt handler so that the establish routine can attach a parent event if
that's appropriate. At present, it isn't.
2001-01-23 22:07:57 +00:00
97b57e69cc
Make bus_dmamap_load_mbuf and bus_dmamap_load_uio use independend
...
segment lists for their mapping; make iommu_dmamap_unload deal with
this type of maps.
Coded by Eduardo, tested (and minimaly tweaked) by me.
2001-01-23 20:31:28 +00:00
21f8de1fcd
fix dup include ossaudio.
2001-01-23 14:12:25 +00:00
ec63f6df14
Use MI loadfile() in loadprotoblocks().
2001-01-23 11:30:54 +00:00
93f107e677
adjust comments to reality
2001-01-23 11:25:59 +00:00
0e59b8d2ec
add 4bpp support (sync with mq200 rev1.6 -> 1.7)
2001-01-23 08:51:48 +00:00
5704d1e2b8
Uncomment the uftdi driver.
2001-01-23 01:44:38 +00:00
5760a7d243
add I/O DATA USB-RSAQ2 serial adapter
...
uplcom* at uhub? port ?
ucom* at uplcom? portno ?
2001-01-23 01:27:23 +00:00
668b6cbaba
We now have a rasops4 attribute to play with. It doesn't work, but then
...
neither do rasops1 and rasops2...
2001-01-23 00:27:44 +00:00
55648b014b
Use our own evcnt structure to count VSYNC interrupts.
...
Also disable interrupts while we're not using them.
2001-01-22 23:29:34 +00:00
d0b6f0f1cd
Changes to interrupt accounting:
...
NULL "name" argument to irq_establish indicates that the device will maintain
an evcnt structure for this interrupt. In this case, irq_establish will still
maintain its own count (for DDB machine irqstat), but won't attach it to the
global list.
Change use of ev_group and ev_name to follow guidelines in evcnt(9).
Switch arckbd(4) over to the new arrangements.
2001-01-22 23:08:26 +00:00
fe3273fbb4
Patch from PR kern/8001, submitted by Rafal Boni.
...
This adds support for EtherExpress/16 cards with 16k of RAM, and in the
process adds general support for PIO mode on these cards. This entails
changing the way the i82586 driver handles bus barriers, since it doesn't
allow for strange cases like this.
This has been tested on the i386 port with the 'ix' driver in both
16KB (which was the source of the problem) and 32KB modes, as well
as with the 'ef' driver. I've tested it (briefly) with 'ei' on arm26
as well. In theory, drivers other than 'ix' should follow precisely the
same code paths as before.
2001-01-22 22:28:43 +00:00
1178bf4219
Initial potentially sharable <arm/armreg.h>. Used by all arm26 code.
2001-01-22 22:10:39 +00:00
a07a06dd78
Only panic if we can't allocate a PT page for the kernel pmap.
2001-01-22 22:10:09 +00:00
ded0acf164
Clear interrupts on the RasterOps PaintBoard Prism GT 1.0. From
...
Alastair Bridgewater <nyef@softhome.net>.
2001-01-22 20:27:02 +00:00
b8d22c0d39
Handle interrupts on the Radius DirectColor/GX (id 0x27c). From
...
Alastair Bridgewater <nyef@softhome.net>.
2001-01-22 18:23:14 +00:00
4a19c21be3
In rcons_connect(): PMAX_FBTYPE_PM_COLOR should use the defaults.
2001-01-22 17:18:32 +00:00
d88ce636a9
Bring this to the code in arch/i386/i386/pmap.c;1.117.
2001-01-22 14:33:29 +00:00
8b24036797
Require the machine-dependant DDB commands to be in db_machine_command_table[]
...
and link it directly to db_command_table[] so that it's not necessary
to do this at runtime. Make db_machine_command_table[] const on all ports.
g/c now unneded stuff, like db_machine_commands_install(), db_machine_init()
Patch written by enami.
2001-01-22 13:56:55 +00:00
ecf8569ea6
make beep_waveform[] const
2001-01-22 13:31:45 +00:00
57f38322d4
Add `-mno-fpu' to the compiler options once again: the current compiler
...
(egcs-2.91.66) is still liable to use FPU registers as temporaries.
2001-01-22 12:59:29 +00:00
9ef14b26c7
- sync with i386.
...
- this change fixes bogus ESRCH error bug in writedisklabel().
2001-01-22 12:37:14 +00:00
9b4793fd1b
#ifdef DREAMCAST --> #ifdef dreamcast.
2001-01-22 08:23:58 +00:00
4791d269ec
-Dsh3 --> -D${TARGET_MACHINE}.
2001-01-22 08:22:15 +00:00
ffb8bbbb30
#ifdef sh3 --> #ifdef __sh3__.
2001-01-22 08:18:06 +00:00
054277902e
Correct a thinko: iteopen()/iteclose() shouldn't just pass off to
...
the wsdisplay driver. Otherwise, closing ttye0 (ite compat) ends
up closing ttyE0, the actual console, when ttyflags runs. Fixes
PR 12022.
2001-01-22 07:31:44 +00:00
f92ee7af5c
sync indent.
2001-01-22 07:04:10 +00:00
8e913e0c2a
Use custom linker script for building ECOFF kernel images. The PROM loader
...
is fussy about the order of sections and location of memory gaps so we
must produce a firmware friendly version of the kernel as netbsd.ecoff for
network booting
The ELF version uses the standard mips linker script which can be loaded
by the new bootstrap routines
2001-01-22 01:54:03 +00:00
62fe0f7f69
Add clct(4) driver.
2001-01-22 01:39:05 +00:00
aa94cdc6ad
Oops. Left a debug printout in there...
2001-01-21 23:53:09 +00:00
3c59914ed6
Added GDROM device.
2001-01-21 23:38:34 +00:00
36382f4889
Primitive GDROM support.
2001-01-21 23:30:28 +00:00
28f7e6dde5
Corrected license text.
2001-01-21 22:45:57 +00:00
ec45004dfc
Fixed double-stroke bug.
2001-01-21 22:44:40 +00:00
c1f1dff4bd
Amiga part of isdn4bsd, and an example kernel configuration file.
2001-01-21 22:23:07 +00:00
f3f791ab03
- Replace idesc by standard wdc attachment.
...
- Add A1200 pcmcia slot driver.
(Both where options already.)
2001-01-21 20:41:39 +00:00
fec2d92852
- Replace idesc driver by standard wdc attachment.
...
- Add PCMCIA driver for A1200.
(Both where options already.)
2001-01-21 20:38:20 +00:00
349386fbd5
change kernel text start 0x8c010000 to 0x8c0001000
...
(I want to decrease dead area.)
2001-01-21 18:34:37 +00:00
3d6806dcc8
hpcsh original device configuration.
2001-01-21 18:33:53 +00:00
7a78296f1c
Add items for 4bit/pixel frame buffer format.
...
Fix frame buffer information of Compaq Aero 1530.
The version of binaries get 1.17.0 2001.01.07.
2001-01-21 14:31:37 +00:00
9aa8ab9279
Use rasops with 4bit depth.
2001-01-21 14:00:32 +00:00
2c13177ff8
Create machine/m68k symlinks before trying to build the program.
2001-01-21 10:58:04 +00:00
82340f7df1
Built-in console driver supports 4bpp frame buffer.
2001-01-21 09:11:28 +00:00
9bd2dee3b2
fix bit rot so that MP kernel compiles s/cpu_no/ci_cpuid/
2001-01-21 07:48:29 +00:00
d36fa12430
knf, some symbolic constants would be nice [pvrreg.h]
...
christos
2001-01-21 05:26:10 +00:00
6a31350117
Fix bugs of VR touch panel driver,
...
- status stay in touching while pen don't realy touch.
- cursor often jumps to center of screen.
But it seems that 'stay in touching' still occurs at rare intervals.
2001-01-21 05:00:28 +00:00
ccea4c274b
Avoid doing Very Bad Things by passing a horrible IRQ value to
...
npxprobe1(). Fixes a problem on IBM Thinkpads reported by
Chuck Cranor.
2001-01-21 04:55:48 +00:00
b7d7186f4e
fix problem detected on IBM thinkpads when running apmd:
...
when the display is closed, the machine suspends (as expected).
when the display is opened again, it resumes and suspends again
(must manually wake).
problem happens because driver fills the event queue with duplicate
events without allowing apmd to drain it by running. fix it by
improving detection of duplicate events.
also cleanup and add some extra APMDEBUG code.
2001-01-21 03:23:31 +00:00
8805bd8b56
Unify arm26 and arm32 trapframe structures. The unified trapframe is the same
...
shape as the old arm32 one, but there are a few #defines to keep arm26 code
happy. Anything that depends on the precise shape of the trapframe,
and especially on being able to treat it as an array of registers, has been
updated.
2001-01-20 17:14:19 +00:00
62ec5a5bc5
UVM pagesize needs to be set *before* UVM tries to use it. The change to
...
a constant PAGE_SIZE value didn't include setting the UVM pagesize, and the
attempt to add this ended up in the wrong place. Amiga should now boot
again.
2001-01-20 17:08:41 +00:00
13d4fcd69b
In cpu_reboot(), only reset the TOD clock if the time is known to be good
...
enough, e.g. it has been initialized already by inittodr() or set
explicitly before by resettodr(). This prevents the TOD clock from going
way backwards when typing `halt' at the `mount root filesystem' prompt.
2001-01-20 13:44:29 +00:00
24706debd2
Fix indent, which were too deep.
2001-01-20 12:24:22 +00:00
b19f9e6e7d
Add some working ISA devices:
...
ep* at isa? port ? irq ?
ne0 at isa? port 0x280 irq 9
ne1 at isa? port 0x300 irq 10
we0 at isa? port 0x280 iomem 0xd0000 irq 9
ne* at isapnp?
2001-01-20 11:40:50 +00:00
4c458e5c42
Fix register name typo.
2001-01-20 07:23:21 +00:00
81685caeed
a few things depend upon assym.h, so add appropriate dependencies.
2001-01-20 07:18:06 +00:00
b01d829ec1
s/ea/eb/ in a couple of places
2001-01-20 02:41:19 +00:00
36607aea63
In the ELF case, use the kern.ldscript unless overridden by the kernel
...
config file.
2001-01-20 01:05:53 +00:00
6970f51de0
Add a linker script for the kernel, which places _etext after
...
all of the read-only data. Move _etext after all the read-only
data in the LARGEPAGES script, as well.
This will cause const data to actually be const on i386 kernels now
(it was, by sheer luck, on LARGEPAGES kernels simply because of the
section rounding that the LARGEPAGES script performed).
2001-01-20 01:05:23 +00:00
84af4fa114
Enable IO space mapping by default.
...
Fixes PR 11940.
2001-01-19 21:25:19 +00:00
ca0031c4cd
No need for a seperate "I'm initialized" variable - the pointer itself
...
should work fine.
2001-01-19 21:18:29 +00:00
8cd0ae534a
Better DMA allocator (thanks to Jason R. Thorpe).
2001-01-19 20:27:31 +00:00
e9d4801895
Make ASTs per-process.
2001-01-19 18:51:17 +00:00
f41a35188a
Actually, specify the number pf ptys explicitly anyway, omitting
...
the number and thus having the default value was probably a mistake
(16 would be too few).
2001-01-19 14:44:11 +00:00
01c07896a6
Update for reality (same as in use on the actual machine, except that
...
-current doesn't require the number of ptys to be specified).
2001-01-19 14:29:20 +00:00
67ea0086c3
fix typos.
2001-01-19 11:42:21 +00:00
3c98a504b9
Added previously created files for powerpc Linux compatibility to the kernel
...
config system
2001-01-19 01:51:16 +00:00
2e0943daa2
- fix prototype of db_mips_variable_func().
2001-01-19 01:41:36 +00:00
5472427809
Added powerpc specific code for Linux compatibility on powerpc ports
2001-01-19 01:36:47 +00:00
2c20803b63
Add extra constants defined by ARM ELF revision B01.
2001-01-18 23:50:50 +00:00
c423d2c0f9
Add support for another PCMCIA ISDN card: Sedlbauer speed star II.
...
While there fix two outdated comments.
2001-01-18 22:13:59 +00:00
48f4b0ea72
Tidy up some comments.
2001-01-18 21:54:28 +00:00
2c89ce7e74
Add <arm/frame.h>, for shared stack frame structures. Currently, only sigframes
...
are common.
2001-01-18 21:48:25 +00:00
6b017eaa04
Add ARMv5 instructions: BLX, CLZ, BKPT, MCR2, MRC2, CDP2, LDC2, STC2.
...
Also correct a comment.
2001-01-18 21:41:09 +00:00
e1e042445c
A bit of extra discussion based on the latest ARM ARM.
2001-01-18 20:42:03 +00:00
e58532a4bf
No-op commit to force update to a non-"-kk" revision.
2001-01-18 17:47:58 +00:00
46b21bb8a8
Fix a couple of brackets in a comment.
2001-01-18 17:05:06 +00:00
1fa7cb5b74
Use <powerpc/psl.h>
2001-01-18 15:30:42 +00:00
13e03d4b43
On V0 proms, read the `idprom' property at the root node to get to the
...
station's ethernet address.
2001-01-18 12:50:10 +00:00
c1fc5392f5
adjust ddb variable access functions to have first arch 'const', make db_[e]regs[] const
2001-01-18 10:55:29 +00:00
d5d431e8ae
make db_[e]regs[] const
2001-01-18 10:54:27 +00:00
65e6340df5
adapt to recent changes of signal structures changes
2001-01-18 10:18:24 +00:00
7aaf4adfb6
const'ify the 1st parameter of db_var_short() to account for the
...
recent "struct db_variable" change.
2001-01-18 09:49:02 +00:00
118221b2e6
Handle the TRPAD case a little better.
...
Also, if the so-called DMA operation is a write and ends without target-
complete set, count the data in the FIFO as residual and add that to the
amount in the counters. Hauke Fath reports that this passes early testing
on his Quantum Viking.
2001-01-18 03:43:18 +00:00
72d949304b
Add IPL_SOFTCLOCK, which was missing.
2001-01-17 20:53:43 +00:00
577f2ffb1c
Remove local declaration of softclock().
2001-01-17 19:03:14 +00:00
dc77af8bea
Don't claim the memory for the executable from the firmware.
...
Some implementations seemed to do strange mappings as a result of it.
2001-01-17 15:37:06 +00:00
8d2ba0ce39
Increase stack size to make this work again.
2001-01-17 15:31:04 +00:00
6b177fb05c
- reduce GP size (20 -> 18).
2001-01-17 10:35:08 +00:00
d2d372a707
Fix softclock prototype.
2001-01-17 08:23:49 +00:00
f79137a3f1
it looks that gas configured for little endian output runs as
...
big endian assembler, sometimes. explicitly have -little to specify
little endian output.
2001-01-17 06:03:54 +00:00
ef1a3ce53b
the kernel for SH3-based WinCE machines (little endian), by uch.
...
MACHINE=hpcsh, MACHINE_CPU=sh3el.
bootloader: ftp://f77.nop.or.jp/users/uch/hpcboot/
original patch: ftp://f77.nop.or.jp/users/uch/hpcsh/
sys/sh3/sh3/md_root.c: add #ifdef MEMORY_DISK_DYNAMIC
2001-01-17 05:21:47 +00:00
cd7c1e7cc9
The actual i386 implementation for /proc/cpuinfo.
2001-01-17 01:21:12 +00:00
d8ba6d06be
procfs_machdep is per port (not per CPU).
2001-01-17 00:44:33 +00:00
fc5dafc79b
Fix a rather annoying problem where the sockaddr_dl which holds
...
the link level name for the interface (ifp->if_sadl) is allocated
before ifp->if_addrlen is initialized, which could lead to allocating
too little space for the link level address.
Do this by splitting allocation of the link level name out of
if_attach() and into if_alloc_sadl(), which is normally called
by functions like ether_ifattach(). Network interfaces which
don't have a link-specific attach routine must call if_alloc_sadl()
themselves (example: gif).
Link level names are freed by if_free_sadl(), which can be called
from e.g. ether_ifdetach(). Drivers never need call if_free_sadl()
themselves as if_detach() will do it if it is not already done.
While here, add the ability to pass an AF_LINK address to
SIOCSIFADDR in ether_ioctl() (this is what caused me to notice
the problem that the above fixes).
2001-01-17 00:30:49 +00:00
c7f1462f3e
Add machdep file for procfs. Currently only used for linux-style
...
/proc/cpuinfo (only active when procfs is mounted with -o linux).
For ports other than the i386 this currently produces an empty
string.
2001-01-17 00:07:18 +00:00
0546607276
Export some variables.
2001-01-17 00:03:02 +00:00
1efb35296f
do not include mmeye.h
2001-01-16 23:57:21 +00:00
e8d906afaa
Validate gate targets.
...
Fix by myself and Charles Hannum.
2001-01-16 23:32:21 +00:00
16090efe76
Let lpmatch recognice the printer.
2001-01-16 21:13:09 +00:00
a1c683863b
remove evbsh3/mmeye.h. it shouldn't be necessary, or at least it has to
...
be renamed to something better.
XXX dreamcast/mmeye.h
2001-01-16 17:36:02 +00:00
85b6e2618d
typo
2001-01-16 17:13:28 +00:00
8492c6a9e8
Add prep installer
2001-01-16 16:53:57 +00:00
9f5a22b3ee
New syscall entry implementation based on the Alpha version
...
as hacked by mycroft.
- Use syscall_intern() to give a process a plain or fancy
syscall based on ktrace flags.
- Avoid copying from the trapframe into a local array as much
as possible.
Yields roughly 5% improvement on a 25MHz R3000 (DECstation 5000/200)
on a simple syscall benchmark.
There's still some work that can be done using __HAVE_MINIMAL_EMUL.
2001-01-16 06:01:26 +00:00
e573dbe78c
We haven't used the 4.4BSD kadb stuff for a long time; garbage
...
collect it.
2001-01-16 04:34:47 +00:00
46130fb7e5
Add uyap.
2001-01-16 03:38:22 +00:00
b9e3ed1f0a
Allow read-write descending memory segments (not that anybody ever uses
...
descending segments).
2001-01-16 01:50:36 +00:00
2e39f7eacf
Added keymap for European keyboards.
2001-01-16 00:56:29 +00:00
bc9ea0aebd
Dreamcast uses a different realtime clock than the builtin RTC.
2001-01-16 00:34:44 +00:00
322c255ab3
WSCONS console added.
2001-01-16 00:33:50 +00:00
839caf1064
PowerVR display driver.
2001-01-16 00:33:20 +00:00
ecb24087d2
Maple bus keyboard driver.
2001-01-16 00:33:01 +00:00
ee6259c508
Maple bus driver.
2001-01-16 00:32:42 +00:00
f575270d81
Switch over to using the arm32 sigcontext structure.
...
Yes, this causes binary incompatibility. Yes, it's Evil, Bad and Wrong.
Nonetheless, I think it's probably the least unpleasant way to get close to
binary compatibility with NetBSD/arm32, and a very much doubt there are any
arm26 binaries out there that depend on the old shape of struct sigcontext.
2001-01-16 00:29:45 +00:00
d74e432ed3
Make softclock a generic soft interrupt of the API is available,
...
adding the requisite void * argument to softclock().
2001-01-15 20:19:50 +00:00
d04bab724e
Implement some seblence of bus_dmamap_mbuf() and bus_dmamap_uio().
2001-01-15 19:27:07 +00:00
c1821150bb
change MINYEAR to 2001.
2001-01-15 15:36:38 +00:00
f3590c636b
Make it compile with "options DIAGNOSTIC" (patch from minoura).
2001-01-15 07:04:41 +00:00
45de366b2e
Rename __GENERIC_SOFT_INTERRUPTS to __HAVE_GENERIC_SOFT_INTERRUPTS,
...
and place the definition in <machine/types.h>. This can now be used
as a flag to indicate whether or not <machine/intr.h> can be included
to get the generic soft interrupt API.
2001-01-14 23:50:28 +00:00
61473e63f9
Define __HAVE_AST_PERPROC.
2001-01-14 22:32:57 +00:00
da57125f23
Now that we won't lose signotify()'s while we're asleep, go ahead
...
and to signal processing in ast() again.
2001-01-14 21:22:56 +00:00
53d2115d66
Make the astpending flag per-process.
2001-01-14 21:18:39 +00:00
372338915a
Use splnet() to block network interrupts, not splimp().
2001-01-14 17:37:41 +00:00
ad669fbaf1
Allocate space for mapping DMA-safe memory from kernel_map.
2001-01-14 17:36:33 +00:00
dc9a8ec9dd
Use splnet() to block network interrupts, not splimp().
2001-01-14 17:33:48 +00:00
a261276f16
The i4b raw b-channel devices actually do have an ioctl routine,
...
so better add this to the cdevsw entry.
Noted by Bruno Achauer.
2001-01-14 11:17:28 +00:00
6695531e85
Fix format warnings to make it compile again.
2001-01-14 09:43:33 +00:00
6f0dfa5049
splimp() -> splvm()
2001-01-14 03:32:20 +00:00
a3ec356d52
splimp() -> splvm()
2001-01-14 03:22:04 +00:00
979919ee0f
splpmap() -> splvm()
2001-01-14 02:03:48 +00:00
d85a75f583
Make sure everybody has an splvm() and equate it with splimp() (splimp()
...
is the historical name for this interrupt level, and the historical name
is going to go away in the near future).
2001-01-14 02:00:37 +00:00
fd0ca62926
Put signal posting back in userret() for now; for it to work
...
properly, we need to make astpending a per-process variable.
Pointed out by mycroft.
2001-01-14 00:39:48 +00:00
2574f338e1
Remove a couple of now-unsed variables (args that are now no longer
...
passed to userret()).
2001-01-14 00:35:53 +00:00
1eb36d23fd
- Make ast() loop around astpending; it's possible for a new
...
AST to be posted when delivering signals, or after a process
is preempted.
- Move all signal posting to ast(). userret() is now a one-liner.
2001-01-14 00:10:28 +00:00
777efd8cdc
Check for ASTs in Syscall and UserGenException, too; AST processing
...
must be done on *every* return to userland.
2001-01-13 23:49:12 +00:00
8df387473f
Move <machine/signal.h> into shared directory.
2001-01-13 17:02:36 +00:00
70d40a123c
Make db_disasm_interface const.
2001-01-13 16:53:27 +00:00
f52101bc64
Make all the disasm_interface_t arguments const, thus allowing us to
...
allocate them statically in the text segment. Do so for disassemble().
2001-01-13 16:52:01 +00:00
792b8500bc
ANSIfy, un-__Pify, and in the case of disassem.c, add an RCSID.
2001-01-13 16:44:25 +00:00
edecf4bc97
Notify UVM subsystem about our page size in pmap_init().
...
Some MI code needs it (Linux emulation, sysctl and the like).
Thanks to Izumi Tsutsui for pointing it.
2001-01-13 11:31:04 +00:00
7701dc57be
Adapt to pci_intr_map change.
2001-01-13 10:46:18 +00:00
27980172f6
Add the types needed by the new locale code.
2001-01-13 03:48:26 +00:00
f806b0811c
Pass CPPFLAGS to gcc in NORMAL_G, plus minor change: ; -> &&
2001-01-13 02:17:50 +00:00
80f1cca44e
Make this compile again: we don't need to initialize PAGE_SIZE and friends
...
since they are now (preprocessor) constants.
2001-01-13 02:15:16 +00:00
032ced3b65
Make these compile again, plus minor aesthetic changes.
2001-01-13 02:09:27 +00:00
11dbbd8afe
make this compile again
2001-01-13 02:08:15 +00:00
78c0ba909e
Separate out sigcode into its own file, since it's shared by arm26 and arm32.
2001-01-13 00:06:50 +00:00
e4cacac41c
Storing four-byte pointers to two-character strings is silly. All the
...
auxilliary tables used by the disassembler are now char[][].
The main table still uses pointers because:
- the longest instruction name, "imbrange" is >7 characters long, which would
make the field length wasteful.
- GCC spots that most of the formats are shared and makes them pointers to the
same string, so turning them into char[8] would be counter-productive.
2001-01-12 23:33:07 +00:00
ca0f6df99d
Move all the nasty big tables into the text segment. This isn't much use in
...
the kernel at present, but maybe one day when we have a ROMmable kernel...
2001-01-12 22:44:08 +00:00
cdae07e857
Correct comments (the code does support LDF, STF, LDC, STC).
...
Support BX (for completeness).
Correct spelling of SWP.
2001-01-12 22:19:15 +00:00
e9bb2a7916
Correct immediate constant handling: bits [11:8] are a rotation, not a shift.
...
Also add support for the "P" modifier to TEQ, TST, CMP and CMN, and don't
bother displaying the "S" bit for these instructions.
Together, these correct the disassembly of 0xe33ff3c2 (an instruction in
arm26 irq_handler() from "teqs r15, #0x08000000" to "teqp r15, 0x08000003".
2001-01-12 21:56:18 +00:00
d6928b5422
Prototypes for disassemble_readword() and disassemble_printaddr().
2001-01-12 21:35:48 +00:00
a5ef6e1f81
Move db_disasm.c into sys/arch/arm/arm. Use arm26 version, since it should
...
generate smaller compiled code.
2001-01-12 21:31:51 +00:00
f9de1a4a50
Handle ELF case on calling ddb_init().
...
XXX should use bootinfo to pass symbol addresses.
2001-01-12 17:17:49 +00:00
aafbe31f11
Enable ELF symbol support to migrate. DB_AOUT_SYMBOLS is still defined.
2001-01-12 17:11:50 +00:00
26d5ada2c0
Remove hp300 derived "last kernel PT page" stuff. (sync with luna68k/x68k)
2001-01-12 16:19:18 +00:00
b1b7565190
Implement bus_space_subregion().
2001-01-12 15:24:15 +00:00
a4047bf10c
Move the generic ARM disassembler from arm32/arm32 to arm/arm.
2001-01-12 13:43:11 +00:00
6189064e69
More FPU-state-saving infrastructure. Not useful yet.
2001-01-12 13:23:49 +00:00
38de3f1a70
Enable the APM_IOC_DEV_CTL ioctl. Works at least for turning off & on
...
a LCD screen on a Dell Inspiron 5000e (and probably many others).
2001-01-12 03:36:50 +00:00
d74ad44e33
Document format of various chunk types.
2001-01-12 00:13:26 +00:00
0bb3b087a6
Document the VIDC audio format.
2001-01-12 00:12:38 +00:00
531e3e2075
Fix up irq_string for a world without intrnames.
2001-01-12 00:11:42 +00:00
6fa98146d5
Start merging actual code in arm32 and arm26:
...
arm32/arm32/in_cksum_arm32.c -> arm/arm/in_cksum_arm.c
Also move specification of other checksum stuff to files.arm, even though we
use the MI code for that.
2001-01-11 23:27:26 +00:00
5159a10d97
Share <machine/elf_machdep.h> between arm26 and arm32.
2001-01-11 22:28:06 +00:00
a2dacbe06d
Switch over to using the generic arm header files for everything that arm26
...
and arm32 agree on.
2001-01-11 22:07:53 +00:00
68ac1c6fc3
Add some infrstructure to support saving FPU state.
2001-01-11 22:03:52 +00:00
fd0605fc53
Mmm, dependency problems. Add a cast to make PROC_PC() actually
...
work.
2001-01-11 21:08:18 +00:00
dc037466f5
Install all the headers (arm32 does).
2001-01-11 21:05:03 +00:00
1add2fd369
Remove <arm/endian_machdep.h>, since we might get a big-endian ARM port
...
some time.
2001-01-11 21:03:10 +00:00
e292dc9609
Move userret() into a header file, in preparation for splitting
...
syscall() into plain and fancy.
2001-01-11 18:44:29 +00:00
f1152a965b
Modeled after mycroft's changes to the Alpha port, add PROC_PC() to
...
get profiling out of userret(), and move the preemption check to ast().
2001-01-11 18:30:16 +00:00
b2bcd7ceb9
Use MI clock_subr.c.
2001-01-11 16:09:42 +00:00
7424b1f3c1
Grotty hack to attach names to interrupts.
...
Should be fixed when I next overhaul this code.
2001-01-11 14:56:07 +00:00
9caeb5a28b
isinram() argument is not a virtual address but a physical address.
2001-01-11 14:24:04 +00:00
0ef9589af4
X68k's physical RAM is not at lowram-0xffffffff, but has multiple segments.
2001-01-11 14:00:11 +00:00
8829b4cc1a
Sync. w/ luna68k; eliminate irrelavant code imposed by
...
the restriction of hp300 hardware and HP-UX compatibility.
2001-01-11 13:18:36 +00:00
950e1bd9b8
Eliminate EIOMAPSIZE.
2001-01-11 10:40:55 +00:00
77f3a6ab78
G/C.
2001-01-11 10:36:46 +00:00
65137701cf
g/c the HP/UX core-dump code; it references a function which no longer exists.
2001-01-11 08:44:36 +00:00
d968e32c3a
Add usscanner.
2001-01-11 06:03:21 +00:00
0cc28d54b1
... this one's utterly pointless though.
2001-01-10 19:05:46 +00:00
29de7da78b
Header files which don't differ between arm32 and arm26 and can thus be
...
shared.
2001-01-10 19:02:05 +00:00
5a91dd00b9
Add "arm" to the "machine" line, so we get files.arm pulled in, and more
...
importantly, the arm->arch/arm/include symlink.
2001-01-10 18:38:37 +00:00
9e0af76a89
Empty file to keep config happy.
2001-01-10 18:33:47 +00:00
6a4e1f2a38
Descend into the arm directory on arm26 and arm32.
2001-01-10 18:23:47 +00:00
f4774e6659
Skeleton ARM include infrastructure.
2001-01-10 18:23:02 +00:00
1c67d8b72d
Add uftdi and ucom, now that they're tested and known to work.
2001-01-10 17:32:08 +00:00
86035aa9c0
dummy WSKBDIO_SETLEDS WSKBDIO_GETLEDS for wsconsctl(8)
2001-01-10 08:43:13 +00:00
3a7c4f5973
Don't panic if we detect an IRQ combination that can't be shared,
...
just return NULL.
2001-01-10 01:15:32 +00:00
5d0c67c603
When adding isdn devices I forgot to check chrtoblktbl.
...
Fix this know for the affected archs.
2001-01-09 20:51:04 +00:00
84a9223126
Add APCS-32 return instructions, though not used yet.
2001-01-09 12:11:57 +00:00
5395f63f35
Revert apparently accidental commit.
2001-01-09 12:03:15 +00:00
8a3a316883
Do not range_test() unless DIAGNOSTIC.
...
Suggested by Tetsuya Isaki <isaki@v6.ipc.hiroshima-u.ac.jp>.
2001-01-09 11:38:32 +00:00
3efddcd88e
Configure PCI_INTERRUPT_LINE on the other side of the pci-bridge on OF3 too.
2001-01-09 08:04:53 +00:00
7a36660307
If there remains no memory in a segment after we chopped off ``the last
...
page,'' skip the segment. Fixes boot problem on Compaq ProLiant ML370
reported at current-users by Mark Davies.
2001-01-09 03:45:49 +00:00
443a19e035
convert to using .WAIT
2001-01-09 03:13:39 +00:00
6378ac40ee
pass the right $CPP
2001-01-09 02:31:37 +00:00
7a9f0b9a95
sync to GENERIC 1.390:
...
- add an NIC & vlan
- add auich, esm, neo audio
2001-01-09 00:47:18 +00:00
6ac8983e9d
sort auich in respect to auvia
2001-01-09 00:40:53 +00:00
301b806db0
ebus_find_node(): plug memory leak; make debug output meaningfuller.
2001-01-08 22:15:47 +00:00
2987c0474d
Fixes from OpenBSD by Brandon Creighton. (bjc@openbsd.org)
...
Log message from OpenBSD:
> - add EMODD emulation (EMODF) -- this fixes modf() and some libm code
> on systems which don't have native EMODD (i.e., most of them)
>
> - big cleanup of the getval_* stuff - have one routine doing most of the work
> instead of four doing the same thing
>
> - add some miscellaneous routines -- count sig. bits
>
> - add more operand addressing modes (still not all fully implemented)
> both the existing POLYD and EMODD can use them
>
> - add me to copyright
>
2001-01-08 22:08:22 +00:00
f53c899649
Add isdn devices to all archs that seem to support at least one of the
...
necessary busses. Sync comments with reality for archs that already had
the devices.
2001-01-08 21:46:33 +00:00
c6274d6e3d
Add and enable the esm PCI audio driver
2001-01-08 20:48:11 +00:00
5af86c93fb
The "#auvia" line was removed from this config; remove the "#audio* at
...
auvia?" line as well.
2001-01-08 17:35:29 +00:00
a0a2fc0688
Implement WSMOUSEIO_SRES to control A/D port scan interval.
2001-01-08 09:50:08 +00:00
0aa3c2b02f
Sync machine types with atari/include/cpu.h
2001-01-07 21:24:05 +00:00
427a7dcda0
Kill a typo.
2001-01-07 21:19:05 +00:00
b9a7cb087a
Nuke a cf_unit abuse.
2001-01-07 21:17:32 +00:00
fb19421ce8
Expand identify_cpu() for the Milan.
2001-01-07 21:12:31 +00:00
c21ca4d86a
Add the Milan as a possible machine type.
2001-01-07 21:08:03 +00:00
3c48826086
Make ahdi_part and ahdi_root 'packed' so I can use this include file on
...
an x86 machine to analyze my atari disk.
2001-01-07 21:05:16 +00:00
6ad6e22efb
Update the printf format in straymfpint() too.
2001-01-07 20:59:29 +00:00
d6ef667612
Fixes for straytrap():
...
- make it clear that we are printing hex-numbers
- fix the loop protection.
2001-01-07 20:56:51 +00:00
2aa1fb4020
Remove old-style interrupt-counting infrastructure (intrnames/intrcnt).
2001-01-07 19:39:08 +00:00
3947143db7
Define __HAVE_OLD_DISKLABEL in <machine/types.h> for i386 (where the
...
other __HAVE_* defines are). Conditionalize definition of old
disklabel struct and ODIOC* definitions on it, allowing other ports
to bump the number of partitions in the label if they want to
(see comment in sys/disklabel.h).
2001-01-07 17:55:40 +00:00
d6bd1012e3
Add facilities for counting interrupts, and a "machine irqstat" command to
...
DDB to tell us what's going on.
2001-01-07 17:01:53 +00:00
2b076072d3
Add a "name" argument to irq_establish and friends, in imitation of arm32.
2001-01-07 15:56:01 +00:00
6b513dfe29
Remove ioc_irq_establish -- It wasn't serving any useful purpose.
2001-01-07 15:36:34 +00:00
fb3dd6b589
ANSIfy.
2001-01-07 15:27:37 +00:00
32ad12527c
ANSIfy.
2001-01-07 15:00:02 +00:00
32ff4eef91
ANSIfy.
2001-01-07 14:28:02 +00:00
c730bd06be
Un-__P, remove arg names.
2001-01-07 13:48:24 +00:00
5c09bd5fc5
Un-__P and remove function arg names.
2001-01-07 13:38:42 +00:00
f68bcbc806
Use ${PRINTOBJDIR}.
2001-01-07 08:38:01 +00:00
e2173eff07
Add some definitions.
2001-01-07 07:29:33 +00:00
6795b1b166
No, really, pass the PA to alpha_pa_access(), not the PFN.
2001-01-07 05:42:54 +00:00
f514e805ed
Move prototypes for mips_user_cachectl() and mips_user_cacheflush()
...
to <mips/cachectl.h>.
2001-01-07 04:13:16 +00:00
7b9c3218e2
Make this C++ safe.
2001-01-07 03:59:31 +00:00
610a127a3d
Fix a stupid = vs == bug that prevented the code working usefully at all.
...
While I'm here, fix all the other GCC warnings too.
2001-01-07 00:30:29 +00:00
fa64805abd
Specify (void) arguments, hence avoiding GCC warning.
2001-01-07 00:07:58 +00:00
4152b5b212
Adjust recent netboot fix to work in the 5100 as well.
2001-01-06 16:59:53 +00:00
32c62f1fdb
ANSIfy
2001-01-06 13:09:05 +00:00
8ce2076cf5
Fix a typo in debug printf.
2001-01-06 06:01:59 +00:00
7e14d8a67c
Cosmetics
2001-01-05 23:58:02 +00:00
ebb91e152f
Disable the daic driver for now. It's microcode handling needs
...
some thougths (legal problems), and the driver is not ready
for prime time anyway.
2001-01-05 23:22:01 +00:00
b90c4c82d9
Make this actually sort-of-work for 68060 w. disabled FPU (tested), 68LC060,
...
and I suspect, 68LC040 and 68040V machines. Method used:
1. do NOT use the frames effective address at all
2. do NOT use the frames next instruction address, but
3. restore the "this instruction" pc into the pc field of the frame at the
beginning of the emulation, if we got a frame format 4.
TODO:
A. find the bug in the usage of the frame EA, and revert to using it.
B. find the bug in the usage of the frames next instruction address, and
consider whether it's worthwhile to use it.
C. make the emulation complete.... FEXP FETOM1, and the trigonometric functions
are missing.
2001-01-05 19:54:30 +00:00
8303e98e40
Fix typo (s/req/reg/).
2001-01-05 19:08:04 +00:00
6a808ce8c8
Initialize VIA Technologies' 82C686's ICU as if it were a 82C586.
...
This fixes interrupt allocation problems on modern Compaq laptops.
2001-01-05 18:39:12 +00:00
52f9536913
Add isapnp devices.
...
XXX CS4232 is not probed properly.
2001-01-05 17:55:38 +00:00
d78ca7c54a
Add isapnp attachment for prep.
2001-01-05 17:49:43 +00:00
5d91708fb9
Generating workspace and project files for eMbedded Visual Tools 3.0.
2001-01-05 15:00:56 +00:00
242656c78a
Enable the imported ISDN4BSD based ISDN subsystem.
...
This is the kernel part (userland to follow soon) of the latest (and
very probably last) release (version 0.96) of ISDN4BSD. ISDN4BSD has a
homepage at http://www.freebsd-support.de/i4b/ .
It gives the user various ways to use the isdn connection: raw data (via
the i4brbch "raw b-channel" device), ppp (via the isp "isdn PPP" device),
voice/answering machine (the i4btel "telephone" device) and ip over isdn
(the ipr device, "IP over raw ISDN").
Supported are a bunch of common and older cards, more to be added soon
after some cleanup. Currently only the european E-DSS1 variant of the
ISDN D channel protocol is supported.
2001-01-05 13:09:15 +00:00
c3cb638bca
Initial import of ISDN4BSD release 0.96
2001-01-05 12:49:52 +00:00
37682e5488
- print debug message for WSDISPLAYIO_GETPARAM/WSDISPLAYIO_SETPARAM
...
when boot verbose mode.
for debuging LCD control and/or keyboard cmds.
2001-01-05 09:09:48 +00:00
78242b5fd8
- fix WSDISPLAYIO_MODE_EMUL mode redrawing.
...
- avoid null pointer dereference.
- clean up hpcfb_show_screen().
2001-01-05 09:04:55 +00:00
fb7be69768
Fixed initial cache setup to handle launch from P2 as well as P1.
2001-01-05 01:14:31 +00:00
d1e05bffc3
Updated linker script set include only RAM based image for Dreamcast.
2001-01-05 01:13:23 +00:00
0374c83129
Fix lost-software-interrupt bug.
2001-01-04 15:01:25 +00:00
828bec041b
committed local change by mistake :-)
2001-01-04 09:49:29 +00:00
a8507fa1e7
pkgsrc/cross/sh-* do not supply cpp
2001-01-04 08:55:08 +00:00
26b1bcce00
cc -v is too verbose
2001-01-04 08:39:53 +00:00
973149dcb3
sh3 split
2001-01-04 08:32:02 +00:00
a629edfcca
use -O1 for now, -O2 dies
2001-01-04 07:55:32 +00:00
c381bbbf74
add missing evtype.
2001-01-04 07:55:15 +00:00
da0e17f08c
fix pathname to meet pkgsrc/cross/sh*
2001-01-04 07:51:50 +00:00
8a58f991f6
content were mixed up
2001-01-04 07:50:23 +00:00
58b63998c2
handle pointer type event message and scaler type event message
...
for CONFIG_HOOK_PMEVENT_*.
2001-01-04 07:43:37 +00:00
156bea1018
nuke obsolete Makefile templates.
...
split build-sh3 into two, for sh3e[bl].
2001-01-04 07:09:47 +00:00
1e7e3274f4
split MACHINE_ARCH sh3e[lb]. userland build still needs checking.
2001-01-04 07:03:21 +00:00
cd4d6511c8
Correct `Year 2001 problem'.
...
Pointed out by Okamoto Kohichi <GHG03305@nifty.ne.jp> and
URA Hiroshi <ura@hiru.aoba.yokohama.jp>.
2001-01-04 06:45:18 +00:00
46921fecee
Avoid null pointer dereference. dc_sc may be null on early stage.
2001-01-04 06:07:43 +00:00
d403e873db
Delete types.h and int_types.h in stand/include/mips and
...
use types.h and int_types.h with __COMPILER_INT64__ in kernel source.
The version of the binaries get 1.16.4.
2001-01-04 06:01:41 +00:00
9d298fafdb
adapt resent config_hook.h
2001-01-04 05:20:37 +00:00
9eb0981033
re-define CONFIG_HOOK NICKNAME.
...
add some macros.
2001-01-04 05:16:26 +00:00
ce0d1ad2fe
- don't ignore DEFCOPTS (Makefile.mips).
...
- DEFCOPTS of hpcmips is "-Os -mmemcpy" (std.hpcmips).
2001-01-04 05:13:30 +00:00
3131dc2c04
make compilable.
2001-01-04 05:01:59 +00:00
a493f2d3fd
typo. struct fpregs -> struct fpreg
2001-01-04 04:42:59 +00:00
62f0a92d52
Avoid null pointer dereference. dc_sc may be null on early stage.
2001-01-04 03:03:04 +00:00
596f0820de
Set HPCFB_DC_CURRENT bit in hpcfb_init() so that boot -d works.
2001-01-04 01:35:21 +00:00
f5f5aac99a
look at __LITTLE_ENDIAN__ (gcc symbol) to determine which endian we are in.
...
makes the file bi-endian.
2001-01-04 00:51:15 +00:00
d04f6f6d57
Just garbage-collect the #if 0'd pmap_transfer() stuff.
2001-01-04 00:17:43 +00:00
16b3064038
split big/little endian better.
2001-01-03 23:49:21 +00:00
4020842234
Fix faults caused by incorrect cacheing information in the pv_entry.
2001-01-03 23:05:22 +00:00
33338b633a
ANSI'ify, and inline userret().
2001-01-03 22:15:38 +00:00
09ffed2ba0
ANSI'ify.
2001-01-03 21:40:25 +00:00
dbe63d5a81
Some more slight cleanup.
2001-01-03 21:39:20 +00:00
5602df2e07
Fix a couple of comments.
2001-01-03 21:27:07 +00:00
c3d730df25
ANSI'ify.
2001-01-03 20:29:58 +00:00
3456657259
Bump shm max pages value to a more realistic one.
2001-01-03 20:19:33 +00:00
a2a696618e
Restructure alpha_sgmap_dmamap_create() slightly.
2001-01-03 20:12:34 +00:00
db36913c87
The code that creates/destroys SGMAP DMA maps is the same; put it
...
in a common place and share it.
2001-01-03 19:15:59 +00:00
1d25215235
$NetBSD$
2001-01-03 18:15:47 +00:00
10e1d3091a
share sys/arch/sh3/conf/Makefile.sh3 across sh3-based architectures.
...
cleanup param.h a bit.
2001-01-03 18:14:44 +00:00
f66249f478
dreamcast went to sys/arch/dreamcast
2001-01-03 17:59:02 +00:00
4eb5bbbdc2
wdog* does not compile due to the lack of WDOG_IRQ.
2001-01-03 15:42:48 +00:00
cf53c74834
* Apply proper cast for 32 -> 64 bit pointer argument conversion.
...
* Since probeget() isn't geared up to deal with _arbitrary_ memory fault
types (and doesn't work at all when called from an interrupt context),
add explicit sanity checks on a stack frame's contents before use
(XXX - needs revisiting).
2001-01-03 15:33:34 +00:00
00fbe713e7
remove #if 0'ed portion
2001-01-03 15:26:17 +00:00
4469b35a09
retain empty "compile" directory
2001-01-03 15:22:14 +00:00
c5fd828440
replace 'long long' with int64_t to compile stand alone program with
...
compiler other than GCC.
2001-01-03 10:08:55 +00:00
0ce4a9a0de
Use highest bit of minor as an extra bit for the partition number to
...
bump the maximum partition number on NetBSD-i386 to 16. (Approved by fvdl)
2001-01-02 23:06:54 +00:00
4cefdbee45
make sendsig/sigreturn work with p_sigctx.
2001-01-02 19:16:34 +00:00
eaf4f43227
Add ELF support.
...
Thanks to Steve Woodford for his help!
2001-01-02 04:28:37 +00:00
472a75b08f
Convert both bootblocks and mkboot to use libsa's loadfile(), and make
...
both ELF aware.
2001-01-02 04:14:33 +00:00
4622cfafe0
Redefine the memset/memmove/bcopy/bzero/memset macros to use more agressive
...
constraints in their inline asm. Gcc generates much better code now.
2001-01-02 04:03:42 +00:00
d9a9b8d6d5
the tcds cards work in pmaxen. move tcds attachment to files.tc. leave asc
...
at tcds in files.alpha for now, and add a new `xasc at tcds' to files.pmax.
after pmax has moved fully to MI scsi (and `asc' is MI scsi), we should move
the device asc, etc., lines to files.tc.
2001-01-01 23:43:05 +00:00
bee6e31c0d
Don't equate pmap_update() with tlbflush(), but instead call
...
tlbflush() when that's what we mean (currently everywhere, except
in the one place in MI code where it is called).
The whole pmap_update() thing needs to be reexamined, but this helps
to clarify things a little with the currently-defined semantics of
that function.
2001-01-01 22:13:53 +00:00
briggs