augustss
aa32088c20
Cosmetic changes.
1999-11-26 01:39:27 +00:00
augustss
240991073c
Generate an error message when attachment fails.
1999-11-26 01:38:40 +00:00
augustss
961d4d6ad2
Change CS4297 id entry.
1999-11-24 23:21:01 +00:00
augustss
df60fd6eac
Regen.
1999-11-24 23:18:07 +00:00
augustss
ae1dcc2dc0
Comment out some entries for Entrega serial adapters. These entries
...
are only relevant before firmware download.
1999-11-24 23:17:27 +00:00
augustss
c156651eb9
Avoid the special when disconnecting devices with no config descriptor.
...
It was wrong.
1999-11-24 23:14:39 +00:00
augustss
bb2a9b3008
Add some more debug printing.
1999-11-24 23:13:19 +00:00
augustss
881d3f4735
A little cosmetic.
1999-11-23 20:36:10 +00:00
augustss
2e175b3f88
Avoid 0 blocksize.
1999-11-23 08:38:30 +00:00
scottr
d617933e27
Round out our options with 4bpp framebuffer support, conditional
...
on RCONS_4BPP.
1999-11-23 01:52:52 +00:00
augustss
17971be39a
Don't used extern on uhcidebug and ohidebug variables.
1999-11-22 21:57:09 +00:00
sommerfeld
17d170b1ca
defopt COM_DEBUG, COM_HAYESP, and COM16650
1999-11-22 03:53:38 +00:00
pk
d5a471ccc9
Check presence of Sbus interrupt properties before using them.
...
Only one case is known to trigger this omission: a Sparc Classic
configured as X terminal.
1999-11-21 15:01:50 +00:00
takemura
cad52c9e08
Add a entry for Mobile Dock 2, which is 2.5" HDD adapter.
1999-11-21 10:13:08 +00:00
jtk
a65648a323
regen
1999-11-20 18:32:31 +00:00
jtk
35b90fb812
add Xircom CE3 10/100 Ethernet
1999-11-20 18:32:08 +00:00
nisimura
40f7514028
Introduce wscons vsxxx mice (and possible tablet) routines; changes
...
of existing codes (lk201_ws.c, zskbd.c, and zsms.c) will follow.
1999-11-20 04:55:30 +00:00
augustss
f73590bbf0
Print the PnP id of unknown codecs.
1999-11-20 01:16:15 +00:00
augustss
14896709bf
Join two lines in the attach message.
1999-11-20 01:15:25 +00:00
augustss
7b92ed07bd
Propagate the USB revision number to the usb driver.
1999-11-20 00:57:08 +00:00
thorpej
7479d29f00
Make the ThunderLAN and VIA Rhine drivers use the common MII bit-bang module.
1999-11-19 18:27:18 +00:00
thorpej
f1ba0d46a3
Regen.
1999-11-19 18:26:22 +00:00
thorpej
55495ae2e9
Add OUI for Enable Semiconductor.
1999-11-19 18:26:09 +00:00
thorpej
0c3eefb6a5
Add a basic CardBus front-end for the `tlp' driver. Still more work to do.
1999-11-19 18:23:35 +00:00
thorpej
9ed17102f4
- Use the common MII bit-bang module.
...
- Add support other than 128-byte SROMs.
- Add support for the 21142/21143 MII.
1999-11-19 18:22:42 +00:00
thorpej
dc5a586c1c
Use the common MII bit-bang module.
1999-11-19 18:17:14 +00:00
joda
d7496546b5
try to do a better job of figuring out the EEPROM size; the old code
...
didn't work on (some?) 557-based cards
1999-11-19 15:19:14 +00:00
bouyer
3a220103e8
Adapt printf format for 64bit stats counters.
1999-11-19 10:42:48 +00:00
augustss
3386c68b46
Cosmetic changes and some small improvements. From FreeBSD and Nick Hibma.
1999-11-18 23:32:25 +00:00
joda
b578473fae
include dev/cardbus/cardbusdevs.h
1999-11-18 16:57:41 +00:00
joda
88d26dd881
regen
1999-11-18 16:03:43 +00:00
joda
08bc681319
fix bogus comment
1999-11-18 16:03:12 +00:00
joda
175087230a
use CARDBUS_VENDOR_INVALID
1999-11-18 15:11:15 +00:00
joda
8c62b47d9f
regen
1999-11-18 15:09:59 +00:00
joda
40f1a07541
add INVALID vendor, and an Intel modem
1999-11-18 15:09:30 +00:00
enami
38acee1010
Cope with new return value of pcmcia_scan_cis(). (Actually, it's not
...
so new but at least newer when I wrote these code).
1999-11-18 14:25:28 +00:00
enami
f38640f00f
Add some comments and reformat comment which doesn't confirm KNF.
1999-11-18 14:20:11 +00:00
oster
5fd68b5d02
We must initialize bp->b_dep in InitBP().
1999-11-18 13:28:06 +00:00
augustss
cdaec29859
A few more purely stylistic changes that I missed in the last round.
1999-11-17 23:00:49 +00:00
augustss
08aacd4e6f
Regen.
1999-11-17 22:59:30 +00:00
augustss
206c85df58
Add CATC analyzer.
1999-11-17 22:59:04 +00:00
thorpej
916d6aaa36
Use the common MII bit-bang module.
1999-11-17 17:56:52 +00:00
thorpej
6c50cb64e1
Common module for bit-bang'ing the MII.
1999-11-17 17:47:59 +00:00
fvdl
ba7e45647d
Initialize buffer dependencies list for soft updates when initializing
...
a new buffer.
1999-11-17 09:34:03 +00:00
thorpej
ce25407921
Make this a lot more like the PCI front-end.
1999-11-17 08:49:16 +00:00
soren
f361f1b1b8
Also disable EX_CONF_INTPHY on the B model.
1999-11-17 08:42:06 +00:00
thorpej
5bd0644a68
Make the MII code match the `ep' driver's (*again*).
1999-11-17 08:03:30 +00:00
thorpej
e1a760a4a7
The 3c575-TX does *not* have an internal PHY.
1999-11-17 07:59:57 +00:00
simonb
fca16d1571
Move the "Attach the interface" section after printing the mac address
...
and buffer sizes. Stops the ipv6 attach info from messing up the
other driver info.
1999-11-17 03:42:24 +00:00
jun
559f1ca662
re-generating isapnpdevs.c isapnpdevs.h
1999-11-17 02:03:10 +00:00
oster
e589155692
Remove some minor stuff that wasn't right, and wasn't even really used.
1999-11-17 01:16:37 +00:00
augustss
ef8e85f177
Regen.
1999-11-17 00:09:48 +00:00
augustss
62058f9f6b
Add the SBLive! joystick device.
1999-11-17 00:09:17 +00:00
augustss
ffb29861c2
Add a few more diagnostics.
1999-11-16 22:19:03 +00:00
augustss
70ad5362d4
Fix a pointer test that I got wrong in the big code cleanup.
1999-11-16 22:15:50 +00:00
mjacob
a7c74fb98f
Re-add stub Qlogic F/W files so that life is easier when/if the new
...
Qlogic F/W copyright is approved.
1999-11-16 18:48:40 +00:00
augustss
c5019ec09a
Add a quirk for a buggy Qtronix keyboard.
1999-11-16 12:08:38 +00:00
augustss
b019d68caa
Some minor changes from OpenBSD.
1999-11-16 12:04:28 +00:00
augustss
1d1d6b868d
Mark an early Altec Lansing speaker as broken.
1999-11-16 11:39:48 +00:00
augustss
982eb1b4e6
Preallocate DMA buffers. Fixes problem reported by Hubert Feyrer.
1999-11-16 10:21:11 +00:00
jun
1e396f9b0b
Support for Adaptec AVA-1502P
...
kern/8804 patch by NAKAGAWA, Yoshihisa
1999-11-16 05:10:54 +00:00
jun
a525b9a12a
Commit patch kern/8778
...
Subject: NEC PCI modem support
1999-11-16 03:15:17 +00:00
enami
7463c844a0
Make this file compile again; terminate the continuation line with backslash.
1999-11-16 02:13:02 +00:00
thorpej
a49d3ecb33
Add a macro to generate a class code given class, subclass, and interface.
...
From UCHIYAMA Yasushi's PCI BIOS patches.
1999-11-15 23:41:10 +00:00
augustss
aef39844d9
Add quirk for speakers that pretend to support the audio class, but don't.
...
Add quirk for mice that geberate spurious button up events (XXX fix not fully
implemented).
1999-11-15 22:04:14 +00:00
mcr
4429aebc03
added support for BOCA 6port ISA adapter. 3x16552 with an
...
interrupt status register at yet-another-address.
ioat0 at isa? port 0x220 irq 5 flags 1# BOCA 'ioat66' 6-port cards
com* at ioat? slave ?
1999-11-15 21:13:38 +00:00
dante
70bd4a7d53
Let user enable/disable WDTR, SDTR and Tag Queuing from kernel config file
1999-11-15 19:55:53 +00:00
fvdl
0b1963121a
Add Kirk McKusick's soft updates code to the trunk. Not enabled by
...
default, as the copyright on the main file (ffs_softdep.c) is such
that is has been put into gnusrc. options SOFTDEP will pull this
in. This code also contains the trickle syncer.
Bump version number to 1.4O
1999-11-15 18:49:07 +00:00
joda
5527afff97
(pccbb_pci_callback): no point in reading the bus number register
...
twice
1999-11-15 16:19:03 +00:00
nisimura
cc2e1c302a
- Reflect changes in ibus_intr_establish() definition.
...
- More concise way to initialize TC framebuffer device for console.
1999-11-15 09:54:41 +00:00
haya
3be097c31d
Handle insertion and removal events more strictly.
1999-11-15 06:08:02 +00:00
haya
89d0a53e2c
Fill 0 into CardBus base address registers before a card is
...
configured.
1999-11-15 06:01:11 +00:00
nisimura
b06e451c53
- No need to include '<machine/autoconf.h>'.
...
- Nuke tc_badaddr() check from asc_tc because the existency check is already
done for real TC devices.
- Nuke tc_badaddr() check from asc_ioasic because it is a builtin device
found in all of IOASIC DECstations.
1999-11-15 05:25:57 +00:00
nisimura
8e061f4876
Make sure TC_IPL_xxx synonymous with IPL_xxx.
1999-11-15 03:45:50 +00:00
nisimura
9c3842f41b
Relocate 'struct tc_softc' and several function declarations useful
...
to outsides of 'tc.c' into 'tcvar.h'.
1999-11-15 03:41:49 +00:00
soren
b202ac1466
Allow SCSI_DELAY to be shorter than 2 seconds.
1999-11-14 18:06:09 +00:00
augustss
5f8274b5a6
Get transfer status right on short transfers. From FreeBSD, Nick Hibma.
1999-11-13 23:58:01 +00:00
matthias
b45486b2a2
Make this work again by adding XS_CTL_ASYNC to the SCSI requests in
...
se_ifstart and se_recv.
1999-11-13 18:03:34 +00:00
soren
748b241afb
Export softc.
1999-11-13 13:40:28 +00:00
mjacob
5f4088eb26
Hide function definition within ifdef's is becomes active in.
1999-11-12 19:11:25 +00:00
joda
f9bf746086
(cardbus_attach_card): don't free cc
1999-11-12 18:18:38 +00:00
joda
4278cf451e
if the image size is zero, assume it really means one block
1999-11-12 18:17:36 +00:00
thorpej
4bdf6bd731
Call mii_down() as appropriate.
1999-11-12 18:14:17 +00:00
thorpej
bca88a28c8
Add mii_down(), which is used by MAC drivers to inform PHYs that the
...
interface is now down. PHYs use this to cancel pending asynchronous
operations.
1999-11-12 18:12:59 +00:00
is
1c37111492
Identification of DOMEX PCI-SCSI board, by Thilo Manske, PR 8772.
1999-11-12 12:03:32 +00:00
augustss
0d2fabdf26
A number of stylistic changes to increase readability (many suggested
...
by Nick Hibma):
use NULL not 0
declare all local definitions static
rename s/usbd_request/usbd_xfer/ s/reqh/xfer/
rename s/r/err/
use implicit test for no err
KNF
1999-11-12 00:34:57 +00:00
augustss
c8ad47986a
Regen.
1999-11-12 00:26:39 +00:00
augustss
505ab77387
Add a modem from ELSA.
1999-11-12 00:26:13 +00:00
scw
3981e235b7
Zero is a valid value for ch_tcor and ch_rcor, so be a bit more conservative
...
when deciding if the baud-rate should be changed. (Spotted by Bruce Martin)
Also fix the mask used when setting the Rx FIFO threshold to zero. I don't
yet understand how the Rx side worked with the code as it was. ;-}
1999-11-11 09:38:43 +00:00
augustss
445d6f8e64
Regen.
1999-11-10 19:47:39 +00:00
augustss
f2725f06b8
Add another Quickcam.
1999-11-10 19:46:40 +00:00
drochner
3bc4cec200
allow to set multiple keyboard "variants" simultanously.
...
Follows PR kern/8456 by Michael Eriksson <eramore@era-t.ericsson.se>,
implemented diffently.
1999-11-10 16:49:38 +00:00
matt
391c8e434d
regen
1999-11-10 15:56:39 +00:00
matt
805b56adb4
Add Entrega USB Serial->DB9 widget
1999-11-10 15:55:51 +00:00
leo
0c76b12125
Give lp->d_type a value other than 'unknown'. When the model is "ST506",
...
the d_type field becomes DTYPE_ST506, otherwise it will be set to DTYPE_ESDI.
1999-11-10 14:11:34 +00:00
augustss
8276207b08
Regen.
1999-11-10 12:31:31 +00:00
augustss
8436192416
Add two more devices.
1999-11-10 12:31:01 +00:00
mycroft
f8934aa2f6
Modification to the previous:
...
We still have to preload the command, when selecting without ATN. (We could
probably avoid this by being more careful in the interrupt handler...)
1999-11-10 05:02:53 +00:00
mycroft
58fec0d55a
When sending a REQUEST SENSE, do *not* attempt to create an I_T_L nexus. This
...
is technically wrong, and some targets (like my 4x NEC CD-ROM drive) misbehave
when we do.
1999-11-10 04:21:30 +00:00
mycroft
105a2438f9
Fix an obvious bug is some diagnostic code; we must lower our spl again...
1999-11-10 04:19:59 +00:00
mycroft
5b75863870
A residual after select with DMA step 2 is legitimate (in fact, *not* having a
...
residual would probably be cause for concern), so don't spew about it.
1999-11-10 00:42:37 +00:00
augustss
e9fc8103ca
Make detach wait for interrupts to finish.
...
Bail out in interrupt routine when device is dying.
1999-11-09 16:52:14 +00:00
augustss
3ea93b7669
Make sure to call vdevgone() on all devices when deteching.
1999-11-09 16:50:47 +00:00
joda
c7cca9cd39
make this compile with CARDBUS_DEBUG
1999-11-09 15:03:59 +00:00
sommerfeld
dea88f1c20
Completely rewrite receive processing to avoid sleep-deprivation-induced
...
brain damage and infinite loops, and lousy RTTs
Also, flush tx queues when reassociating with AP and when taking the
interface down.
1999-11-09 14:58:07 +00:00
haya
e54d837b8b
Maintenance CardBus/PCI extension ROM mapping routine.
...
1. Make Extension ROM not to be mapped on I/O space.
2. Do not check the bus-space indicator in ROM register.
1999-11-09 09:20:30 +00:00
nisimura
2924b6835a
Fix errors in sfb_copycols() of the forward (left-to-right) case.
1999-11-09 08:25:31 +00:00
oster
3949e74f78
If we have a choice: do not trust the parity disk for read
...
balancing in a RAID 1 set if we know that the parity might not
be up-to-date. Thanks to Thor for bringing this to my attention.
1999-11-09 03:07:20 +00:00
joda
1b686307cb
correct number of BAR:s in cardbus_cis_info
1999-11-08 20:21:24 +00:00
joda
fe2d79ec9a
Let decode_tuples take function to call for each tuple, and use this
...
to get some vital information from the CIS (some network cards need
this to get the mac-address). This should be merged with the related
code for PCMCIA cards, but that requires more thought.
1999-11-08 20:19:10 +00:00
joda
dbb2685da6
add some bare-bones CIS information to the attach_args struct
1999-11-08 19:59:08 +00:00
joda
f6be3b394d
regen
1999-11-08 19:57:32 +00:00
joda
19ff47781e
copy xircom entries from pcidevs
1999-11-08 19:57:13 +00:00
sommerfeld
1cfdb728d0
avoid touching freed mbuf after allocation failure.
1999-11-08 15:56:16 +00:00
sommerfeld
66ab262b1c
add a bunch of debug printfs under IFF_DEBUG and IFF_LINK2;
...
turn on IFF_DEBUG to trace the management protocol goo.
turn on IFF_LINK2 as well to see beacons.
1999-11-08 15:45:00 +00:00
sommerfeld
94bb856781
misc cleanups; seems to work a little better in a dense-AP environment now.
...
1) ignore probe requests rather than printing "unknown mgmt subtype"
(cosmetic)
2) don't panic if mget of the 2nd mbuf in a chain fails (patch from MCR)
(though that whole function badly needs to be rewritten)
3) be a little more tenacious about hanging on to an access point.
1999-11-08 13:24:00 +00:00
augustss
9cec807b1c
Return -1 from wsmux_displayioctl() if no muxes components like the ioctl().
1999-11-08 10:10:25 +00:00
mycroft
0c1542d9a4
Apply wrstuden's stopgap change to make alpha/macppc X work without wsmux.
1999-11-08 04:48:18 +00:00
enami
8567277ae0
Print range of all iospaces or all memspaces if their length aren't zero.
1999-11-07 07:44:21 +00:00
cgd
b4560adaf2
regen
1999-11-07 07:03:08 +00:00
cgd
7867af6cfb
back out rev 1.166:
...
(1) the list added isnt' complete and i'd call it incorrect. (There are
other devices with these names, where were omitted. I've never seen
the devices with these IDs, I _have_ seen the other devices that go
by these names.)
(2) the PR (8754) had not been updated to note that the problem was
fixed, and i'd preiously asked the submitter for more information and/or
a corrected list.
1999-11-07 06:59:46 +00:00
sommerfeld
8be740541b
Extract MAC address from CIS data in pcmcia front end.
...
Fix multicast address manipulation.
ipv6 now works through this driver.
1999-11-06 16:43:53 +00:00
rh
b2a56ee1b9
regen.
1999-11-06 13:50:02 +00:00
rh
080ff79d14
Add vendor/product entry for Auravision VxP524 PCI Video Processor.
1999-11-06 13:48:29 +00:00
augustss
34e97b4c65
Regen.
1999-11-06 11:18:00 +00:00
augustss
3514a2e115
Add SIIG devices. Closes PR kern/8754 from Andreas Wrede <andreas@planix.com>
1999-11-06 11:17:30 +00:00
soren
6f961bbe31
It's okay for a memory region to be larger than it's alignment.
1999-11-06 06:20:53 +00:00
enami
6b2ae05f21
Possible typo.
1999-11-06 01:01:20 +00:00
enami
9be459a1fb
Regen.
1999-11-06 00:59:56 +00:00
enami
9c7bc44f91
Support an earlier version of IO-DATA PCLA/T.
1999-11-06 00:58:32 +00:00
pk
23c39b410d
Fix some diagnostic output with a patch from Jonathan O'Brien.
1999-11-05 19:00:44 +00:00
ad
341c38ac01
In rasops_do_cursor(), don't pull the mask from ri_devcmap[], just use ~0.
...
Needed to make cursor DTRT on NetBSD/hpcmips - from takemura.
1999-11-05 10:16:11 +00:00
sommerfeld
73bf131124
Add rcsid's
1999-11-05 05:13:36 +00:00
nisimura
392a4acdd7
- Remove temporary hack to recognize PMAGD since SFB+ rendering function
...
is found not fully upward compatible to its predecessor. sfbp.c is now
under development.
- Reduce copycols() malfunction, but has still lot of troubles.
1999-11-05 03:28:40 +00:00
bouyer
fb8b192c0a
Pass xfer->c_bcount instead of sc_xfer->datalen to the device, so that
...
it gets the rigth len for a request sense (from OpenBSD).
1999-11-04 21:16:53 +00:00
thorpej
0ad32f07d2
Revert this part of rev 1.59:
...
- Be more conservative when resetting the interface after a transmit error.
It caused the interface to totally wedge on the (somewhat common) transmit
FIFO underrun condition.
1999-11-04 20:27:11 +00:00
thorpej
4a09180976
Don't pass rd/mult capability though a PCI-PCI bridge. The bridge would
...
have to break it up into mutliple rd/line's anyhow, so why bother letting
the device issue it in the first place.
1999-11-04 19:04:04 +00:00
thorpej
110ac27449
Make sure devices are told they can use rd/line, rd/mult, and wr/inval.
1999-11-04 19:03:00 +00:00
sommerfeld
d9bc6e4f98
Conditionalize so this builds on 1.4.x..
1999-11-04 18:43:42 +00:00
sommerfeld
12b00b0444
Allow this to build on 1.4.x, too
1999-11-04 18:41:14 +00:00
sommerfeld
fd0062aeab
Attempt to be smart about whether to use I/O space or memory space to
...
access the card's shared memory: if we can't allocate the 32k we need,
fall back and just use I/O space access.
1999-11-04 17:48:13 +00:00
sommerfeld
2ee5984fa6
Driver front-end for BayStack 650 PCMCIA 802.11 card.
...
Committed using the driver.
1999-11-04 17:12:43 +00:00
sommerfeld
58e709f695
Minimally functional driver for the am79c930 802.11 controller chip).
...
Working well enough to support dhcp; i'm doing this commit using the
interface.
Supports FH only. Does not yet do ad-hoc mode; works in
infrastructure mode. Not yet tested in environments with multiple
access points.
1999-11-04 17:10:53 +00:00
tsarna
c0b20561f7
regen
1999-11-04 16:18:41 +00:00
tsarna
9df6f09e30
Add Aureal AU8820
1999-11-04 16:02:20 +00:00
augustss
fb580e3f6e
Regen.
1999-11-04 10:34:40 +00:00
augustss
1289659618
Add SBLive!
1999-11-04 10:34:03 +00:00
joda
c8532c3ebe
regen
1999-11-04 09:39:17 +00:00
joda
dbfcb792e1
add Xircom X3201-3 Fast Ethernet Controller
1999-11-04 09:38:38 +00:00
jonathan
0588cdfc88
Update user-level PPS-API to match -05 draft.
...
Change PPS_<xxx> ioctls to PPS_IOC_<xxx>.
1999-11-04 05:33:58 +00:00
mrg
bd0928e723
find "SUNW,hme" as well as "hme". this matches the onboard
...
ultra2 hme. haven't actually tested this beyond it probing
because my scsibus is hanging. anyway, it reports:
hme0 at sbus0 slot 14 offset 0x8c00000 vector 21 ipl 6: address 08:00:20:8f:7f:8f
1999-11-04 05:31:38 +00:00
thorpej
97bbad1f0b
Do rd/line and rd/mult on the MX98725 and LC82C115, too.
1999-11-04 01:27:32 +00:00
thorpej
e3f20e8ff1
Use Memory Read Line and Memory Read Multiple on the 21140, 21140A,
...
21142, and 21143, if the PCI bus says its okay.
1999-11-04 01:20:55 +00:00
thorpej
a4e1bde0b3
Print out if the read {line,multiple} and write/invalidate commands are
...
okay to use.
1999-11-04 01:03:34 +00:00
thorpej
ca9b9a3b2e
Adapt to mii_phy_probe() change.
1999-11-04 00:24:00 +00:00
thorpej
bedeeb9896
Allow mii_phy_probe() to be called multiple times, and allow the caller
...
to specify either the PHY number or the PHY `offset' (1st, 2nd, 3rd, etc.)
to configure.
1999-11-04 00:22:07 +00:00
thorpej
3750d3f592
Update for ifmedia changes.
1999-11-03 23:07:10 +00:00
augustss
1e460723a5
Don't flag an error when doing ioctl() on a mux without any
...
multiplexees. Should fix PR 8723.
1999-11-03 22:48:38 +00:00
thorpej
bc82bff1dc
Don't add any loopback versions of media, for now.
1999-11-03 22:32:45 +00:00
thorpej
8fc600c3b1
Clean up the code that adds media a little, and make media selection
...
table-driven in preparation for some other changes to be made.
1999-11-03 22:30:32 +00:00
thorpej
e017601bd3
More or less completely rewrite the way DECchip media is handled, and
...
add support for the DECchip 21142/21143 SIA/SYM media. Make the Macronix
98713 behave like a 21140A, and the 98713A and later behave like a 21143.
Nuke all of the Macronix-specific Nway code, as it will be identical to
the 21143 Nway code once it is written.
1999-11-03 22:25:08 +00:00
thorpej
eb16cd3aa7
Define DECchip 21142/21143 register bits, and since the Macronix chips
...
are nearly perfect 21143 clones, delete a bunch of redundant info in that
section of the file.
1999-11-03 22:22:49 +00:00
ragge
94b8f863fa
Don't use structs for BI space definitions, use offsets.
1999-11-03 21:57:40 +00:00
matt
31ba134e32
use __vax__ and __i386__ instead of vax and i386
1999-11-03 20:50:17 +00:00
chs
f13d3f5b3b
from jason:
...
avoid biodone()ing the original buf twice when a component buf
gets an error. fixes PR 8704.
1999-11-03 16:04:03 +00:00
mycroft
d2b362b685
Only update the cursor state if it's enabled.
1999-11-03 15:55:27 +00:00
mycroft
4f1f2c6398
Fix silly error that caused the secondary channel to be ignored if the primary
...
channel was disabled.
1999-11-03 14:54:07 +00:00
augustss
3b576cc6b2
Update.
1999-11-03 12:11:26 +00:00
augustss
3fc5780b19
Allow irq 15 since some clones use it.
1999-11-02 23:35:02 +00:00
augustss
361b083d4c
Shorten some delay()s. From WITEK Wnuk <witek@atari.org>
1999-11-02 17:48:01 +00:00
augustss
35483ee3bf
Set mixer controls after a reset.
1999-11-02 17:05:05 +00:00
augustss
b952f8727b
Print a little more information when attaching.
1999-11-02 16:54:27 +00:00
kleink
b536890c88
Add a mixer control for the Master Volume Mute knob.
1999-11-02 12:11:42 +00:00
augustss
72a864f78c
Add the midibus attribute to the fms driver.
1999-11-02 11:58:06 +00:00
takemura
8f94bda30c
Add new font sets - VT220 8x8 and 8x10.
...
I brought them from arch/i386/isa/pcvt/Util/fonts.
You can specify FONT_VT220L8x8 or FONT_VT220L8x10 in a configuration file.
1999-11-02 10:25:22 +00:00
soren
bc18b45323
Clean up attachment printing a bit.
1999-11-02 05:41:27 +00:00
soren
09c41837ce
Fix crash when both 1370 and 1371/1373 devices are configured.
...
Update documentation links.
XXX The initial volume of the 1371 mixers is set to 255. Should be ~200.
1999-11-02 05:40:59 +00:00
thorpej
c8852145bc
Get fms MPU and OPL module inclusion right.
1999-11-02 00:29:20 +00:00
augustss
3c40153ea9
Fold some long lines and make it compile with the new auconv functions.
1999-11-01 23:26:58 +00:00
augustss
7c8206c662
Add a missing file for the fms driver.
1999-11-01 21:54:12 +00:00
augustss
8cd393778b
Regen.
1999-11-01 20:43:51 +00:00
augustss
684aa0605c
Add FM801 audio device driver. From Witold J. Wnuk ww181302@zodiac.mimuw.edu.pl
...
Closes PR kern/8729.
1999-11-01 20:43:12 +00:00
augustss
860ebb7a92
Make little endian and big endian version of all functions
...
that deal with 16 bit samples. Let the drivers decide which ones
to use.
1999-11-01 18:12:19 +00:00
augustss
fb4a4525a8
Be cautious about the blocksize returned by the hardware driver to
...
avoid division by 0.
1999-11-01 18:06:36 +00:00
haya
88f1d44cc2
Change the interface of cardbus_function_enable() and
...
cardbus_function_disable().
1999-11-01 09:59:23 +00:00
haya
8553661a5e
Maintainance the name of Ricoh PCI-CardBus bridges.
1999-11-01 08:58:45 +00:00
joda
d094848950
uncomment fxp_cardbus
1999-10-31 15:14:17 +00:00
joda
b0e5ebfddc
commit a more working version if this driver; so far only tested on an
...
Intel `PRO/100 LAN+Modem56 CardBus II'
1999-10-31 15:12:39 +00:00
mycroft
8efdaab402
Fix the size of start_sector, end_sector and end_sector_l0. (I'm just going to
...
assume the Linux people will also fix this, since I reported it to them.)
1999-10-31 14:03:16 +00:00
augustss
6346873ea6
Use the right attribute for attaching USB controllers.
...
From MAEKAWA Masahide <bishop@rr.iij4u.or.jp>
1999-10-30 17:03:30 +00:00
bouyer
98b5a519ce
In sddump(), check sd->sc_dev.dv_flags once sd has been initialised.
...
Patch supplied by tsutsui@ceres.dti.ne.jp in kern/8708.
1999-10-30 16:35:12 +00:00
sommerfeld
db05febdfa
Add enable/disable support and EEPROM size selection, prerequisites
...
for getting the cardbus fxp attachment to work.
Tested on the built-in 82559 in a VAIO Z505S.
From Johan Danielsson / PR8631; changed slightly to KNF.
1999-10-30 16:07:58 +00:00
augustss
3d0e8ae9dd
Make this file compile again by using the same names as in pcidevs.
1999-10-30 16:02:28 +00:00
augustss
a498fbea5f
Add midibus attribute for eap.
1999-10-30 14:11:16 +00:00
enami
b9451ead47
remmove unncecessary empty line.
1999-10-30 12:07:08 +00:00
enami
fc21ddd943
Call epstop at the beginning of epinit, especially to make sure that
...
ep_tick is untimeouted before new one is scheduled. This makes 3C574-TX
works at least in 10Mb/s mode.
1999-10-30 01:35:47 +00:00
enami
3f199cc5e4
Add and delete a reference to an adapter at aicattach(), to make sure
...
that the adapter is disabled even if it wasn't enabled/disabled during
configuring its children. This fixes the bug that if an aic pcmcia card
is inserted in a slot during boot, further attaching of any card on the
slot fails once the card is removed.
1999-10-30 00:58:32 +00:00
augustss
613db45d20
Add MIDI support.
...
Closes PR 8578.
1999-10-29 23:03:18 +00:00
matt
b2db663942
fix entry for lemac on isa. add entry for wavelan on isa
1999-10-29 21:38:04 +00:00
matt
5fcccf1e9c
Add a placeholder for the ISA WaveLAN card
1999-10-29 21:35:43 +00:00
matt
471ab17680
Regen.
1999-10-29 21:31:30 +00:00
matt
c707186f57
Add AHA-1480 (adaptec cardbus scsi)
1999-10-29 21:30:19 +00:00
ragge
12c16f443f
DEC specifies that dealing with CSR0 in the interrupt routine must be
...
done in a special order. Do that here also, but for now inside #ifdef vax
because of the (possible) impact on other arch's.
Now vaxen without IOMMU can use the MI LANCE driver.
1999-10-29 19:50:07 +00:00
mycroft
e45ef6abcd
Emulate the Linux DVD_* ioctls(2). This gets us 90% of the way to running the
...
LiViD DVD player. (See forthcoming mail to current-users.)
XXX NOTE: We should do something to probe capabilities, rather than allowing
these ioctls on any device.
1999-10-29 15:02:56 +00:00
joda
ee08428d1c
handle multi function cards
1999-10-29 12:02:13 +00:00
joda
1ea6cd1de0
add cardbus_exrom.c to cardbus device
1999-10-29 11:31:40 +00:00
joda
54fed4c419
add support for reading memory mapped CIS via BAR or EXROM register
1999-10-29 11:30:27 +00:00
haya
65c3b4c4c7
Maintainance the name of Ricoh PCI-CardBus bridges.
1999-10-29 07:57:38 +00:00
haya
47fc621312
Remove unnecessary check in cardbusmatch.
1999-10-29 07:29:08 +00:00
haya
dd9c83a378
Change cardbus messages when cardbus does not configured.
1999-10-29 07:27:43 +00:00
thorpej
9d820e6fab
Add some 21142/21143 goo.
1999-10-28 23:32:37 +00:00
joda
8ff7881953
add macro to get ROM image number, given a CIS pointer
1999-10-28 22:29:04 +00:00
joda
12d5a03a7f
code to read PCI expansion ROM
1999-10-28 22:27:00 +00:00
sommerfeld
77ee68352f
regenerate
1999-10-28 20:00:29 +00:00
sommerfeld
2acce3142f
Add BayStack 650 802.11 FH card
1999-10-28 19:59:31 +00:00
sommerfeld
652701006d
Fix suspend/resume-related problems observed on fxp0 on Sony Z505S:
...
Symptoms: system would crash with "data modified on free list" pool
panic from the mbuf cluster pool shortly after a resume. The cluster
in question contained a valid 82557 receive descriptor and an IP
packet. Happened sporadically in normal use. Easiest way for me to
reproduce it was to run tcpdump and a flood ping and do a
suspend/resume cycle or two.
Changes:
- in interrupt handler, if the interface isn't in IFF_RUNNING state,
just ack interrupts and return; don't try to receive packets, queue
new descriptors, etc., etc.,
- add power control hook to take interface down on suspend,
and restart it (if it was up) on resume.
- tweaks to fxp_stop and fxp_shutdown to avoid recursive panics due
to the (now fixed) bug.
1999-10-28 19:21:51 +00:00
mjacob
7c3f92fd69
Remove f/w from tree. The licences are not acceptable to TNF.
1999-10-28 16:13:43 +00:00
mjacob
44c603dd7b
Remove reference to loadable f/w.
1999-10-28 16:11:19 +00:00
leo
38cae5303b
Remove htopci(). bus_space_write_4() takes care of necessary endian conversions.
1999-10-28 13:49:19 +00:00
augustss
9388a61d05
Add a few more tests for safety.
1999-10-28 12:08:38 +00:00
jun
061402cc4a
add
...
SOCKET LOW POWER ETHERNET Compact Flash Card.
1999-10-28 09:21:46 +00:00
jun
0f51f21761
add entry Corega PCC-TX PCMCIA card.
1999-10-28 08:12:14 +00:00
augustss
357dc256c9
Make sure read() and write() fails on the control pipe.
1999-10-28 07:28:51 +00:00
jun
a6e07f236b
Sorry backout Patch about COREGA FAST_ETHER_PCC_TX.
1999-10-28 07:21:28 +00:00
augustss
e33e7aa647
Regen.
1999-10-28 06:41:40 +00:00
augustss
786bc11173
Another device...
1999-10-28 06:41:13 +00:00
jun
312acdff00
add Corega PCC-TX PCMCIA Card (not CardBus but 100Base-TX) Entry.
1999-10-28 06:38:51 +00:00
mjacob
7227a97ad0
I was misinformed. I cannot get away from specifying tags for FC. Some devices
...
are happy w/o them- some are unhappy (IBM drives).
1999-10-28 02:50:34 +00:00
is
5ef42fc055
Regenerate.
1999-10-27 19:10:58 +00:00
is
5a76bfb229
Yet another Fujitsu Ethernet card.
...
Contributed by HEO SeonMeyong in PR 8658.
1999-10-27 19:10:02 +00:00
thorpej
00ba1a42eb
Fix a braino in some currently-disabled code.
1999-10-27 19:05:44 +00:00
christos
040891d3e1
regen
1999-10-27 15:12:28 +00:00
christos
c48725b28e
PR/8692: maximum entropy: Recognize Creative SB Awe 64 joystick.
1999-10-27 15:11:56 +00:00
joda
4d92da53d4
allow mapping of the expansion rom
1999-10-27 14:14:18 +00:00
joda
132b3f5e57
add Expasion ROM register (0x30);
...
fix typo in Cardbus_conf_write
1999-10-27 14:09:52 +00:00
joda
d9c500abb3
(cardbus_attach_card): don't mask everything *but* the latency timer
1999-10-27 14:01:04 +00:00
augustss
8ecf3c7c3e
Add support for ES1371. From OpenBSD and Ezra Story <ezy@panix.com>.
1999-10-27 13:20:34 +00:00
augustss
91cbb40ee5
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 13:18:02 +00:00
haya
91b09f5b16
Change cardbus API. The first argument of cardbus_mapreg_map() is
...
changed to struct cardbus_softc * from cardbus_devfunc_t. The old
function is renamed to Cardbus_mapreg_map().
1999-10-27 10:04:41 +00:00
haya
7b66141eed
Use opt_cardbus.h for cardbus.c and opt_cardslot.h for cardslot.c.
...
Remove unnecessary include from cardbus.c.
1999-10-27 09:29:18 +00:00
nisimura
5cf97491d8
Add a temporary kludge to recognize PMAGD (HX+) as 'sfb' hoping 8bpp
...
configration of it is compatible enough with PMAGB-BA.
1999-10-27 04:32:35 +00:00
haya
0263d8db3d
Do not stop no matter when pci_mapreg_map fails to map bridge socket
...
registers. When it fails, reset Socket Base Address register and map
registers using rbus.
1999-10-27 00:48:36 +00:00
mjacob
fb6f289535
nuke a debug printout I thought was already gone
1999-10-26 22:23:20 +00:00
drochner
29dd0803eb
allow to wildcard the serial channel
1999-10-26 18:20:44 +00:00
drochner
0247fe44f6
regen
1999-10-26 12:35:14 +00:00
drochner
7254017312
remove duplicate entry
1999-10-26 12:34:41 +00:00
drochner
9eed0f5d8a
change PMAF-F to PMAF-FA for consistency, add some more stuff
1999-10-26 12:23:13 +00:00
nisimura
95c618a810
- Fix bogus cursor drawn by sfb_cursor(). From eye-opening input from R.C.
...
Dowdeswell.
- Remove write memory barriers in sfb_copyrows() as dst. is always distant
enough from src. for copying rows.
1999-10-26 10:57:04 +00:00
drochner
b4fc704a74
avoid cast
1999-10-25 19:39:54 +00:00
drochner
87568e8d82
defopt the XNS protocol (options NS), clean up the use of related
...
option headers / defines
1999-10-25 19:18:10 +00:00