69ecf2f7f4
add the right (raster, wsconsdev) attributes to sfb
1996-05-01 20:26:39 +00:00
8199dee1d8
add SFB at tc, wcsons at sfb, and fix up le declarations
1996-05-01 20:23:04 +00:00
85d72d56a2
add an entry for the SFB+, and clean up entries some
1996-05-01 19:44:21 +00:00
bcb9d27216
More cleanup for -Wall with DEBUG.
1996-05-01 16:58:41 +00:00
b1d1cbe84b
Define BSR_MASK and use BSR_MASK to get the current bank select register.
...
Clean up the debugging code a bit and the warnings from -Wall.
Don't define ESDEBUG - it can now be set from the config file.
If the Ethernet chip gets reset during the copy of the transmit buffer,
requeue the current packet and reinitialize the controller. This recovers
from an apparent hardware bug when running on my A2000/Zeus system.
1996-05-01 15:55:28 +00:00
bb91ff2547
Define BSR_MASK and use BSR_MASK to get the current bank select register.
1996-05-01 15:51:08 +00:00
b03bb4a6e5
Cleanup for -Wall if CV64CONSOLE, ULOWELLCONSOLE or RETINACONSOLE is not
...
defined.
1996-05-01 09:59:24 +00:00
03088f61b8
<sys/cpu.h> is no longer needed
1996-05-01 09:56:22 +00:00
0b637e93a8
Convert the Etherlink III (ep) driver to use <machine/bus.h>.
1996-04-30 22:29:56 +00:00
9d91d0f742
Convert the Etherlink III (ep) driver to use <machine/bus.h>.
...
For the ISA probe, implement a way to keep track of which ISA busses
have been through an ep_isa probe; the static variable that was used
before didn't scale.
1996-04-30 22:27:58 +00:00
d614ab5859
Update the 3c507 probe to the new interfaces used by elink_reset()
...
and elink_idseq().
XXX This is just a kludge until the entire driver is converted to use
<machine/bus.h>
1996-04-30 22:21:54 +00:00
91b4a6d401
Adapt the elink_reset() and elink_idseq() routines for <machine/bus.h>.
...
In elink_reset(), since some machines may have more than one ISA bus,
implement a way of keeping track of which ISA bus has received an
elink_reset(); The static variable which was used previously didn't
scale.
1996-04-30 22:16:27 +00:00
a787e8f99b
Remove the dk_establish() prototype. It's (correctly) prototyped in
...
<sys/disk.h>.
XXX Wasn't this file supposed to go away?
1996-04-30 20:45:21 +00:00
b2af0c2297
Kill unused variables and fix prototypes.
1996-04-30 18:11:38 +00:00
af547471fe
Give example for INSECURE option in the GENERIC config file in a comment.
...
Closes PR 2355 giving a different explanation of the option than proposed.
1996-04-30 17:40:34 +00:00
068f1fb582
We really have two mouse port units, honestly.
1996-04-30 17:25:42 +00:00
b50e8aab63
- Drop SCSI IRQ interrupts if we are already handling one. This works around
...
a condition that occurs with some slow SCSI devices when they disconnect
(e.g. the AppleCD 600), generating spurious selection interrupts.
- Reorganize the debugging code slightly.
1996-04-30 17:07:17 +00:00
9cdce38dd0
Bring back Step9 and fix an oversight from Ken Nakata <kenn@remus.rutgers.edu>
1996-04-30 12:02:54 +00:00
6d6bfccb69
Clean up a few printf format strings.
1996-04-30 11:57:49 +00:00
9602c596f5
Prototype oc_cksum().
1996-04-30 11:57:05 +00:00
41f393e6b8
Update for -Wall -Wstrict-prototypes -Wmissing-prototypes -Wno-uninitialized.
1996-04-30 11:52:09 +00:00
7511a5540e
Remove BIOSSEG.
...
Don't mess with the flags when entering a software interrupt.
Use IF, not VIF.
NOTE: These changes break dosemu, but are required for proper emulation.
1996-04-30 10:35:25 +00:00
bcd490a50d
Remove include of sys/cpu.h.
1996-04-30 06:09:51 +00:00
1f2555ebd4
dk_establish() now returns void.
1996-04-30 05:00:51 +00:00
3fff2a8f83
Fix apparent paste-o ... spurious "}"
1996-04-30 00:56:45 +00:00
5e7380a531
Remove trash left from a merge (probably really my fault).
1996-04-29 21:36:17 +00:00
fa75ea39e1
Move delay() to locore, so we control code generation and can avoid
...
touching memory locations whose caching disposition can perturb timings.
1996-04-29 21:08:37 +00:00
b926918576
There seem to be 2 types for a trap frame....
1996-04-29 20:55:44 +00:00
dc05f2d48c
Prototype + -Wall fixes.
1996-04-29 20:50:08 +00:00
a1609dc859
- Fix gcc -Wall warnings
...
- BUG: if (error = ...() == EWOULDBLOCK)
1996-04-29 20:30:48 +00:00
1c86bef3bc
Fix gcc -Wall warnings.
1996-04-29 20:28:40 +00:00
e8a8a6298c
- prototype fixes
1996-04-29 20:02:32 +00:00
d0987b1ee9
- prototype fixes
...
- BUG: changed:
val &= CD_POL_MASK;
val | CD_POL_BIT; /* XXX if (pol) */
to:
val &= CD_POL_MASK;
val |= CD_POL_BIT; /* XXX if (pol) */
1996-04-29 20:00:39 +00:00
27292adc4c
- gcc -Wall fixes
1996-04-29 19:50:47 +00:00
c32e566f6c
- missing argument in printf
...
- gcc -Wall fixes
1996-04-29 19:48:26 +00:00
f1dd12ed4e
Prototype fixes
1996-04-29 19:45:32 +00:00
3a77c25f3e
Add prototypes.
1996-04-29 19:30:50 +00:00
3f3082e5f5
Add a clean target to clean the assembler binary
1996-04-29 19:30:19 +00:00
4335844690
fix botched printf spacing in last change.
1996-04-29 16:36:19 +00:00
6deeeb8a0f
update for dk_establish() proto change
1996-04-29 16:34:50 +00:00
b2ab71db24
fix definition of the "Primary Eligible" RPB PCS processor variation field.
1996-04-29 16:23:09 +00:00
5e0ec7280a
clear BIP; it should really happen at end of autoconfiguration.
1996-04-29 16:09:28 +00:00
48fca88c3a
fix printf bogon (need : and space)
1996-04-29 16:06:38 +00:00
f22c1ccb83
clean up setting of the default tty cflag. don't do the "delay if
...
high bit set" thing.
1996-04-29 14:48:25 +00:00
e147a74bbb
Chip needs much more time to think things over (up to 2 seconds to complete
...
a `recalibrate' command if no flop present).
1996-04-29 12:07:32 +00:00
74de027054
Add floppy index interrupt routine for future MSDOS floppy support.
...
Don't seek to track 0 before checking for diskchange: if drive steps,
the diskchange flag is cleared. Just select the drive, then test for
a diskchange.
Clean up for -Wall with FDDEBUG defined, and fix a message typo.
1996-04-29 06:23:47 +00:00
d6d4fbe664
Correct NetBSD->RDB partition block mapping - fixes -Wall warning.
1996-04-29 06:15:32 +00:00
dc5ff52131
dk_establish() returns void.
1996-04-28 20:25:59 +00:00
5289ee2d24
dk_establish() is actually supposed to be void.
1996-04-28 20:22:50 +00:00
340e30dfbb
shuffle some and change rd to pseudo-device.
1996-04-28 19:18:42 +00:00
03c347c3bd
More cleanup for -Wall warnings.
1996-04-28 07:01:08 +00:00
0f666b973a
More cleanup of -Wall warnings when compiled with DEBUG.
1996-04-28 06:59:08 +00:00
810a98153e
Add prototypes for serial and floppy interrupt functions.
1996-04-28 06:57:15 +00:00
c3fa50adb7
Fix warning from word transfer pseudo-dma function.
1996-04-28 06:49:35 +00:00
d48db213fa
Prototype the pseudo-dma function declarations.
1996-04-28 06:41:01 +00:00
f7679aaef1
Fix warning from -Wall.
1996-04-28 06:36:16 +00:00
2b6ece67ba
Fix warnings from -Wall.
1996-04-28 06:33:58 +00:00
5b9b315985
Cleanup for -Wall if CL5426CONSOLE is not defined.
1996-04-28 06:31:47 +00:00
0fa2771b31
Correct check for NULL pointer references in siop_scsidone().
...
Only call Debugger() if DDB is defined.
If the wait for reselect is interrupted and sc_nexus was NULL, only
print the debug message if DEBUG is defined.
1996-04-28 06:28:24 +00:00
7327b8ff44
Set file size of a softlink to the length of the symbolic link path,
...
to match what FFS does. Fixes PR #2316 .
1996-04-28 06:18:12 +00:00
2c2a65b39e
Add a __noreturn__ attribute for doboot
1996-04-27 20:55:08 +00:00
c12ef8ae8f
Make the compiler happy if you make a kernel with -Wall
1996-04-27 20:53:31 +00:00
dccff2509f
Fixed a compile bug which come from the new mouse driver
...
Remove the fd* entry from the GENERIC config and changed the std.amiga
entry for the floppy
1996-04-27 20:51:07 +00:00
0b892f0599
Fixed a compile bug which come from the new mouse driver
...
Fixed a bug with the noreturn attribute of boot and doboot
1996-04-27 20:48:47 +00:00
c4f10ac478
Fixed cpu_set_kpc() and pagemove() functions to match prototypes.
1996-04-27 03:00:27 +00:00
10ec66cba0
No longer needed as this file has been replaced with the generic mouse
...
interface described in mouse.h
1996-04-27 02:09:16 +00:00
0b44bb02a0
Removed prototypes for cpu_set_kpc(), cpu_swapin() and cpu_swapout() as
...
these are now defined in other header files.
1996-04-27 02:04:39 +00:00
270d48fd22
Add "void" return type to consinit().
1996-04-27 00:39:59 +00:00
8591bb3346
Prototype doboot() and give it the __noreturn__ attribute, so that
...
machdep.c will compile.
1996-04-27 00:38:44 +00:00
f09d86fa87
Fixed compiler warnings generated with -Wall.
...
Added dump routines for dumping buffer and vnode information.
1996-04-26 22:49:21 +00:00
0a05345dc3
Added needs-flag for the asc driver.
1996-04-26 22:46:07 +00:00
6e054ed22f
Probe functions rewritten to support new podulebus configuration code.
...
matchpodule() is now used to test podule_attach_args for correct id's.
Moved the probing code that used the softc into the attach function.
Fixed compiler warnings generated with -Wall.
1996-04-26 22:44:00 +00:00
fff1823ed8
Probe functions rewritten to support new podulebus configuration code.
...
matchpodule() is now used to test podule_attach_args for correct id's.
1996-04-26 22:41:24 +00:00
9a12d19953
Probe functions rewritten to support new podulebus configuration code.
...
matchpodule() is now used to test podule_attach_args for correct id's.
Fixed compiler warnings generated with -Wall.
1996-04-26 22:38:11 +00:00
4a3ceede5a
Added function prototype for matchpodule().
1996-04-26 22:34:02 +00:00
c18452b410
podulebus configuration code rewritten. Junked config_scan() from
...
the podulebus attach function.
For each podule found, config_found_sm() is now called. Device drivers
now only need to look at the podule_attach_args information during
the probe.
A new function matchpodule() has been added for use in the
podule device driver probe functions.
1996-04-26 22:32:36 +00:00
027b04a250
Fixed compiler warnings obtained with -Wall.
1996-04-26 22:25:56 +00:00
a6da4ae69c
Fixed compiler warnings generated with -Wall.
1996-04-26 22:01:51 +00:00
504699a05d
Added prototypes for cpu_swapin(), cpu_swapout(), tlbflush()
...
cpu_set_kpc() and need_resched().
1996-04-26 21:12:36 +00:00
38b0e06483
Added prototypes for setsoftnet() setsoftast() and setsoftclock().
1996-04-26 21:10:21 +00:00
b2d569c95e
Fixed compiler warnings generated with -Wall.
1996-04-26 21:02:49 +00:00
6a7f88f956
Included sys/systm.h for function prototypes.
1996-04-26 21:00:31 +00:00
aa46efbc0e
Fixed compiler warnings obtained with -Wall.
1996-04-26 20:59:07 +00:00
8b4332315d
Fixed buffering of console output. While cold or while polling,
...
buffering is disabled.
Tidied up a bit of the code inline with kernel coding style.
1996-04-26 20:56:04 +00:00
189e6aba9f
Fixed a multitude of compiler warnings obtained with -Wall (mainly
...
unused variables).
1996-04-26 20:48:23 +00:00
a88f28f958
Updated functions to match prototypes in sys/systm.h
1996-04-26 20:35:23 +00:00
9e67e6e232
Included ddb/db_output.h for db_printf() prototype.
...
Fixec compiler warnings generated with -Wall.
1996-04-26 20:30:54 +00:00
8cce48f9a3
Included ddb/db_output.h for db_printf() prototype.
...
Fixed compiler warnings generated with -Wall.
1996-04-26 20:28:28 +00:00
3b62994c10
Include ddb/db_output.h for db_printf prototype.
...
Replaced some printf calls with db_printf calls.
Fixed compiler warnings generated with -Wall.
1996-04-26 20:25:55 +00:00
bebcb9b554
Removed unused variable ptr in swapconf().
1996-04-26 20:22:52 +00:00
a0864f1ad0
Remove double empsc entry, fix a typo, and our "zbus" is a unified Zorro
...
bus interface for a long, long time.
1996-04-26 20:21:59 +00:00
d4fcd14ee3
No longer needed. The netbsd config for gcc/arm has been fixed to generate
...
correct profiling code.
1996-04-26 20:07:43 +00:00
39b959c810
Added copyright message.
1996-04-26 20:05:28 +00:00
e305bdb71c
switched to MI driver
1996-04-26 19:55:39 +00:00
08b3f74e0d
nuke old isr structure (no longer use)
1996-04-26 19:44:03 +00:00
81fc59565a
cpu.h: add prototypes (from jason)
...
disklabel.h: new disklabel format (from Dale Rahn)
param.h: new delay stuff (from sun3 port)
vmparam.h: nuke eiomap for new autoconfig (from jason)
z8530var.h: for MI driver (from jason)
1996-04-26 19:40:53 +00:00
46263136cb
"jumbo patch":
...
- new autoconfig scheme+vme (autoconf.c,clock.c,clockreg.h,
clockvar.h,vm_machdep.c)
- new interrupt scheme (isr.c,isr.h,locore.s,machdep.c,vectors.s)
- switch to MI zs driver (conf.c)
- new disklabel code, from Dale Rahn <drahn@pacific.urbana.mcd.mot.com>
(disksubr.c, compatable with theo and dale's openbsd version)
- new delay() based on sun3 port, using dynamic configuration from
the sparc port (intergrated by me), calibration moved to startup
by jason. (locore.s,machdep.c)
- clean up: nuke eio space (genassym.c,locore.s,pmap.c,pmap_bootstrap.c),
nuke STACKCHECK (locore.s), prevent maxuser overflow (pmap.c),
Contributed by Jason R. Thorpe <thorpej@og.org> (thanks!)
1996-04-26 19:26:25 +00:00
6d3c0d5c50
remove iio files; replaced by jason's new autoconfig scheme
1996-04-26 19:04:28 +00:00
7625dd4cb4
remove mainbus.c: never actually used
1996-04-26 19:03:28 +00:00
d80422cd46
- zs: switch to MI driver
...
- clock, le, pcc, wdsc, zs: convert to new autoconfig scheme
- vme: add vme support
Contributed by: Jason R. Thorpe <thorpej@og.org>
1996-04-26 18:59:58 +00:00
34c1e309b6
Yes, folks, there was a REASON that maxusers -> 32 slipped through the
...
cracks when I mentioned it to Chris. (Read: it doesn't work.)
1996-04-26 18:54:15 +00:00
ba1034fd85
- sync with new autoconfig code (iio goes away)
...
- add support for zs1, vme devices (untested)
Contributed by: Jason R. Thorpe <thorpej@og.org>
1996-04-26 18:47:34 +00:00
dd27878e7f
Catch up with some prototype changes.
1996-04-26 18:37:58 +00:00
035d12359e
Remove some hacks that "went around" the linesw[] operations.
1996-04-26 18:36:54 +00:00
b26b45a14d
Corrections for removed <sys/cpu.h> and some more prototypes.
1996-04-26 06:59:15 +00:00
7f0e5ecf77
- Fixup the ipending function for the Falcon. This seemed to be the source
...
of a lot of instability problems on the Falcon. I also enabled DMA on
interrupt basis for the Falcon.
- Try to handle targets that request too much data more sanely.
- Some fixups for strict prototypes + -Wall
Thanks to Markus Kilbinger for providing the debugging support.
1996-04-26 06:50:12 +00:00
2931555121
Correction I mentioned to Chris that slipped through the cracks...
...
maxusers -> 32.
1996-04-26 00:53:08 +00:00
eb335437e2
Ooops. ncr_sbcreg.h -> sbcreg.h
1996-04-25 23:47:06 +00:00
90b5a113d9
Renamed the sbc driver files
1996-04-25 22:30:10 +00:00
aca6a2e6da
Renamed these files.
1996-04-25 22:26:52 +00:00
95101e1310
Renamed these files.
1996-04-25 22:02:58 +00:00
a0bca74134
Remove some now-useless code.
1996-04-25 21:18:04 +00:00
5282131d76
Add ie1, appropriate for EtherExpress support
1996-04-25 20:14:13 +00:00
09407a4201
Document the VM86 option by adding it to the GENERIC* kernel config
...
files. Note, the option is disabled by default (comment out). This
is meant as an example for others.
1996-04-25 18:59:14 +00:00
07beed1117
Fix an obvious typo (wrong sign of test). At the same time, make the early
...
probe printf prefix unambiguous.
1996-04-25 18:54:45 +00:00
18fd76201e
We don't need to enforce the MAX_DMA_SIZE limit in dma_alloc();
...
this is handled properly by sbc_drq_intr() already.
1996-04-25 14:40:26 +00:00
f1f45fae7c
Emulate the INTO instruction.
1996-04-25 13:50:21 +00:00
2e936aa8ff
- Remove several hacks that didn't do much but waste cycles.
...
- Disable interrupt-driven PDMA when writing (use polled PDMA instead).
- Be more careful about when to flag a transfer as completed.
The result of these changes is that interrupt-driven PDMA works well
enough to bring the system up.
1996-04-25 06:18:41 +00:00
f726c602da
another prototyp cleanup
1996-04-25 05:57:38 +00:00
72e70ce045
update for present reality
1996-04-25 04:28:04 +00:00
aff40e2a72
Break up the ep driver into isa, eisa, and pci front-ends and a
...
bus-independent core driver. Tested on all three bus types, including
an isa 3c509 masquerading as an eisa device (use ep* at eisa? slot ? in
your kernel config file to catch this one).
XXX Driver still needs to be converted to <machine/bus.h>
1996-04-25 02:15:42 +00:00
b8a3e738c6
Make the minimum function signature for this file to compile with the latest
...
changes to vm_extern.h.
1996-04-25 01:15:41 +00:00
3e07e4275a
clean up and improve instructions, update to reflect current reality.
1996-04-25 00:11:09 +00:00
424ce7590a
Sync with prototype changes
1996-04-24 18:02:26 +00:00
09916f81d3
Make the Amiga mainboard mice, which used to be pseudo-devices, real devices.
...
(We want to support Amigoids without this interface in the near future.)
1996-04-24 11:41:16 +00:00
0ca6a87952
Remove memset.c; it is not currently used, and .c files should belong in
...
the MI portion of libkern. When/if we move to use mem* routines in the kernel
we can add it to the MI portion/write a memset.s.
1996-04-23 23:05:22 +00:00
463c504dc7
The prototyp for cpu_set_kpc is now in sys/systm.h
1996-04-23 22:54:49 +00:00
112379ef29
Added some ifdef's for RETINA_SPEED_HACK
...
Argh, why is a fuction from the RetinaZ2 console driver in the console
driver for the RetinaZ3 ? Fixed.
Fixed some warnings from -Wall if you don't use -DDEBUG
1996-04-23 22:53:05 +00:00
1ca9fb10a0
The prototyp of cpu_coredump is now in sys/signalvar.h
...
Added an ifdef DEBUG for struct phys_segs
1996-04-23 22:46:39 +00:00
646acc51d0
Map the pixels explicitly on the VME32 bus.
1996-04-23 19:34:05 +00:00
ee8f3dc1b8
Turn delay() into a calibrated loop. It's more accurate and compiles into
...
a `leaf' routine, avoiding unexpected large delays by overflowing the
register windows.
1996-04-23 19:25:25 +00:00
0536f1591a
Protect two critical lines of ser.c with splser(). Without this, a
...
race condition exists which makes the internal serial drop incoming
characters under heavy load.
1996-04-23 17:03:04 +00:00
5b809af42a
Changed the speed calculations of the Amiga-builtin-serial driver to
...
allow any baudrate the hardware allows, and to forbid two baudrates
(50 and 75) which the hardware does NOT support but which the old
speed conversion table pretended to support.
1996-04-23 16:38:32 +00:00
edda199ab0
patch from: Steve Woodford <steve@mctavish.demon.co.uk>
...
fixes the following problems:
- Timeout on START/STOP unit command (ie. when spinning up the drive)
Side effect of this fix is to reduce the busy-wait time in CMD phase.
- Occasionally, the driver would lose an SBIC interrupt, especially when
a tape drive was re-selecting on a busy SCSI bus.
1996-04-23 16:32:54 +00:00
7bc9a18250
prototyping cleanups
1996-04-23 15:26:06 +00:00
58a104f26a
pal_halt doesn't return; give it a noreturn attribute.
...
Mark assembly that uses 'mb' as clobbering memory (pthreads does, and
it can't hurt).
1996-04-23 15:24:09 +00:00
5437babf6c
prom_halt doesn't return; give it a noreturn attribute
1996-04-23 15:23:18 +00:00
27c9c12e72
Clean up sbc_drq_intr() a bit; also, be more paranoid about size of transfer.
1996-04-23 14:20:28 +00:00
59cdf4331e
clean up some, and use new sioreg.h
1996-04-23 14:15:55 +00:00
8253c155fe
hanges from Trevor Mendez <tmendez@bbn.com> to use new sioreg.h
...
header. Also, I moved the LCA_SIO_DEVICE definition higher up in the
file.
1996-04-23 14:15:28 +00:00
84da7b5f97
Intel 82378 System I/O (SIO) Chip register defintions, cleaned up a
...
bit from a version supplied by Trevor Mendez <tmendez@bbn.com>.
1996-04-23 14:10:53 +00:00
e9bbf69ff6
Changes from Trevor Mendez <tmendez@bbn.com> to add definitions of a
...
couple of registers useful for debugging.
1996-04-23 14:03:46 +00:00
fea5e372e6
Corrections from hardware manual, from Trevor Mendez <tmendez@bbn.com>.
...
Adds comments and sets IOC_CONF correctly (it's write-only!).
1996-04-23 14:00:53 +00:00
d8adbe4247
Changes from Trevor Mendez <tmendez@bbn.com> to make this compile
...
with NWSCONS == 0.
1996-04-23 13:57:55 +00:00
0895b8dd09
Changes from Trevor Mendez <tmendez@bbn.com> to print 0x's before hex
...
numbers when panic()ing because of a machine check, for sanity.
1996-04-23 13:54:32 +00:00
a818b81625
Added missing prototypes from <sys/cpu.h>
1996-04-23 12:25:23 +00:00
df8c6afda1
Ignore joystick packages when running in 3b. emulation mode.
1996-04-23 11:02:01 +00:00
d15c34d744
Prototype futimes().
1996-04-23 10:29:33 +00:00
584810c846
Implement futimes().
1996-04-23 10:29:02 +00:00
7ee33b9890
Regen.
1996-04-23 10:27:28 +00:00
af747826c6
Add futimes(), at position 206.
1996-04-23 10:24:21 +00:00
5bdb632088
u_int -> u_long fixes for printf's
1996-04-23 05:18:29 +00:00
d9b8ec83bd
Ups, I removed a label which should go into a ifdef
1996-04-23 05:14:40 +00:00
509ace1016
Handle internal video interrupts on RBV-based machines differently so
...
that Ethernet cards have a chance to work. In particular, this change
has been tested on the IIci, IIsi, and LCIII. The crucial info behind
this code was the result of a lot of work by Julian Bean.
1996-04-23 03:53:26 +00:00
6b768c677a
Now that we have lehwinit() for the Sun4m, make sure that we wait 20ms
...
after changing the cable type, as specified in the chip documentation.
Also, sanity-check that sc_dma is valid in case a Sun4m ever exists without
a ledma.
1996-04-22 03:57:29 +00:00
b57c554d06
Add a hardware dependent initialization function lehwinit()
1996-04-22 02:53:28 +00:00
90bc31d478
remove include of <sys/cpu.h>
1996-04-22 02:50:20 +00:00
a897ec996a
Remove dependency on <sys/cpu.h>
1996-04-22 02:42:00 +00:00
b016bd441a
Add a hardware dependent initialization function lehwinit()
1996-04-22 02:40:49 +00:00
bebf990150
Oops the name of the UTP/AUI bit changed under me...
1996-04-22 02:39:49 +00:00
5253b892e9
Add a hardware dependent initialization function lehwinit()
...
to support selecting UTP media on sun4m
1996-04-22 02:37:10 +00:00
709298a10a
- Changed Sun4m DMA chip support to detect and use maximum available SBus
...
burst size when transferring data.
- Changed ledma attach code to pay attention to the PROM's notion of what
cable type is being used. Note that this patch does not fix the problem
recently discussed on port-sparc; in most cases the PROM doesn't know
what cable type is being used. The default is now TP rather than AUI,
though. A complete fix is forthcoming.
1996-04-22 02:34:53 +00:00
78403e6c0c
Add a hardware dependent initialization function lehwinit()
1996-04-22 02:25:54 +00:00
ffd5576439
remove include of <sys/cpu.h>
1996-04-22 01:44:31 +00:00
261b2f7f02
fix a printf format string
1996-04-22 01:43:45 +00:00
4ef330b934
remove include of <sys/cpu.h>
1996-04-22 01:38:12 +00:00
cee6ac0ce3
remove sys/cpu.h
1996-04-22 01:26:39 +00:00
93ee03dff9
add prototypes from <sys/cpu.h> to the appropriate places
1996-04-22 01:23:06 +00:00
8d33c5c8b4
- Fix fencepost error in ifconf() where if space = n * sizeof(struct ifreq),
...
only n - 1 interfaces would be obtained. This bug is present in the Lite2
sources too.
- Support COMPAT_SVR4 in ifconf()
1996-04-22 01:20:34 +00:00
efc7b8aec4
- don't use if_index to get the number of interfaces in SIOCGIFNUM; compute
...
the actual number.
- forgot to copyout the result in SIOGCIFFLAGS.
1996-04-22 01:17:33 +00:00
02f94c17fb
Add SI_SYSTEMINFO from Solaris-2.5
1996-04-22 01:16:04 +00:00
a922ebfb8b
- Cleanup for -Wall and -Wstrict-prototypes
1996-04-21 21:13:16 +00:00
974e9f6e22
- Cleanup for -Wall and -Wstrict-prototypes
...
- Added support for multiple floppy drives
- CyberVision64:
- has now a real console mode
- another bugfix for boards with the new S3 chip
- Ariadne:
- fixed crashes with aeput (mbuf failure)
1996-04-21 21:10:48 +00:00
dbf4b28b74
Added support for multiple floppy drives
...
Added entry for the emplant scsi driver
1996-04-21 21:09:40 +00:00
db6f1b1304
Cleanup for -Wall and -Wstrict-prototypes
1996-04-21 21:06:46 +00:00
585e1044c8
aic0 belongs at IRQ 11 (the card default); the entry was apparently
...
changed to 12 by mistake when GENERIC was created after NetBSD 1.0.
Change confirmed by Perry and several others. Fixes PR 1878.
1996-04-21 20:55:25 +00:00
18dd6b0909
Prototypes.
1996-04-19 20:35:31 +00:00
f4e4aeed3c
Check for curproc being NULL in pmap_remove().
1996-04-19 20:33:01 +00:00
d4d9deb9d7
Added facility to dump the SCSI information from the asc driver.
1996-04-19 20:15:36 +00:00
e59df39537
Added asc_dump() function to dump the information gathered by the sbic
...
driver.
1996-04-19 20:13:56 +00:00
0d0b8de238
Code fixes to get the sbic debugging code to compile.
1996-04-19 20:09:50 +00:00
0e486086a5
Added information of the iic and rtc devices.
1996-04-19 20:04:29 +00:00
7bbb222f40
Raise the spl level to spltty while manipulating the virtual console
...
linked lists.
A couple of minor code cleanups.
1996-04-19 20:03:37 +00:00
c771d9f6c3
Config files updated for the new iic and rtc devices.
1996-04-19 20:00:41 +00:00
584d8e9b80
Updated to reflect removal of iic and rtc code from arm32/ and the
...
creataion of the iic and rtc devices.
1996-04-19 19:57:49 +00:00
a65bd66705
Header file for IIC structures, prototypes and ioctls.
1996-04-19 19:52:46 +00:00
e51f620a83
Added IIC information for the PCF8583 RTC chip.
...
Added #ifdef guard on rtc prototypes.
1996-04-19 19:51:48 +00:00
0b22968311
Initial commit of iic and rtc devices.
1996-04-19 19:49:03 +00:00
ab4a325e4c
The iic and rtc are now devices and have been rewritten ane moved to the
...
mainbus directory.
1996-04-19 19:43:31 +00:00
11fb5f4ba0
Added configuration information for character devices iic and rtc.
1996-04-19 19:40:29 +00:00
85d47049cc
Don't report time or 'clock has gain ...' message if the base time
...
was 0 in the inittodr() function.
1996-04-19 19:39:17 +00:00
3c0096ff79
gcc -Wall delinting: unused variables, assignments inside if's and missing
...
arguments in printf statements.
1996-04-19 00:02:29 +00:00
d7b610dca6
Fix 3c590 to use the new pci interface; the pci compat code changes were
...
slightly biffed.
1996-04-19 00:01:19 +00:00
901483b57b
Sigh. Send a trace trap only if we are still in VM86 mode.
1996-04-18 21:21:11 +00:00
15d4e17598
Send a trace trap only if the trace flag is set at the *beginning* of
...
the emulated instruction.
1996-04-18 20:36:35 +00:00
204542255a
After an emulated instruction, check the trace flag and force a trace
...
trap if needed.
1996-04-18 19:58:09 +00:00
442dec5d53
new driver: SCSI for VME147
...
contributed by: Steve Woodford <steve@mctavish.demon.co.uk>
this driver is based on the amiga sbic/33C93 driver. Steve has
cleaned it up and fixed lots of bugs. Note that the original driver
used features which require at least a WD33C93A (the vme147 has the
original WD33C93 chip <no 'A' suffix>). Steve has also written
the DMA routines for the 147 to get things really going. Hardware
scatter-gather DMA and sync. SCSI are not supported (yet). tested
on several disk drives and a tape drive. CD-ROM untested, but
should work.
1996-04-18 18:30:49 +00:00
da32bd7fed
add wdsc, enable FFS, move le
1996-04-18 18:14:32 +00:00
f56be1680c
add wdsc device
1996-04-18 18:07:58 +00:00
a574a3a423
add PCC_ICLEAR
1996-04-18 18:07:08 +00:00
94b120dfa8
add a "delay" function.
...
XXX: assumes vme147 speed. needs to be fixed and sync'd with DELAY.
[will work with jason/hp300 to fix it properly]
1996-04-18 18:06:30 +00:00
dbc3478277
establish a dk_establish() function.
1996-04-18 17:43:04 +00:00
47bf863ac1
Make some of the flag handling clearer. No functional change.
1996-04-18 10:04:32 +00:00
aaed1c2fae
Don't bother to enable alignment checking; nobody uses it and it interferes
...
with VM86 mode.
1996-04-18 09:58:13 +00:00
b3fadef7e0
Yet more prototyping and -Wall fixes.
1996-04-18 08:51:11 +00:00
7a8c8f8a5c
Turn off the alignment check flag when entering a signal handler.
1996-04-18 08:36:20 +00:00
7458364702
Implement the I/O read/write-multiple functions for chipsets
...
that use this file (APECS, LCA, and CIA).
1996-04-18 05:53:04 +00:00
ff0a52ccd9
define bus_io_{read,write}_multi_{1,2,4,8} functions, which read/write
...
multiple values from a single I/O port in to/out of an array of values.
1996-04-18 05:47:29 +00:00
4a134a0780
don't include user-land headers in libkern files when compiling for
...
the kernel.
1996-04-18 02:19:59 +00:00
1813cc71d0
don't include user-land headers in libkern files when compiling for
...
the kernel. memset.c does not belong here. it either belongs in
the MI libkern directory, or does not belong in libkern at all.
1996-04-18 02:19:07 +00:00
55afd9912f
don't get rid of the -D_KERNEL in KERNCPPFLAGS
1996-04-18 02:14:48 +00:00
a5dc646be0
use assembly version of strcat (copied down from libc)
1996-04-18 01:53:04 +00:00
720c148692
remove unnecessary header inclusion (machine/autoconf.h) and now-bogus comment.
...
also, trim spaces at ends of lines, etc.
1996-04-18 01:12:41 +00:00
e27e15d0ac
change NLE flag for IOASIC LANCE buffer to NLE_IOASIC, and add comments
1996-04-18 00:59:11 +00:00
03d386daa7
attach le with different attributes, depending on parent (i.e. tc or
...
ioasic), and use those attributes to pull in appropriate files.
le_ioasic now has needs-flag, but le doesn't; the flag is only necessary
on systems configured with IOASIC-attached LANCE chips.
1996-04-18 00:55:15 +00:00
f8073d3675
restructure to take advantage of config's (relatively) new 'attach'
...
specifiers. Many #ifdefs and much other nastiness removed.
1996-04-18 00:50:11 +00:00
d7d306aeb7
change LANCE copy & zero functions' names to start with amd7990_, and
...
remove their 'integrate' (usually defined to be 'static') keywords.
when lance drivers are split up by attachment, more than one file will
reference the copy/zero functions (i.e. not just the file that pulls in
am7990.c... and eventually inclusion of am7990.c should go away entirely).
1996-04-18 00:25:11 +00:00
eccf43e127
files copied from libc
1996-04-17 22:46:34 +00:00
17731baa0d
fix copyrights
1996-04-17 22:22:32 +00:00
69ad2e587b
ioasic doesn't need a flag, and correctly conditionalize inclusion of
...
machines' tc configuration files.
1996-04-17 22:08:29 +00:00
71c7924099
clean up clock handling: clock drivers are now seperate from the
...
chip-independent clock code. 'clock' has been renamed 'mcclock' 'clock'
has been renamed 'mcclock' (since it's a driver for that particular
clock, and since eventually there may be another clock chip driver),
and now attaches via seperate match/attach functions to both TC and ISA.
This removes a whole lot of #ifdefs...
1996-04-17 22:01:16 +00:00
a5778ae63b
print cpu names slightly differently (number first)
1996-04-17 21:50:56 +00:00
0b0a8bfe15
fix bug in pcivga_erasecols() that would cause garbage to be spit out.
...
other minor style cleanup.
1996-04-17 21:49:58 +00:00
d727565526
fill in the tty window size information, so that standard terminal
...
entries can be used with weird displays.
1996-04-17 21:48:30 +00:00
b417cc19fe
Make this compile again on a SPARC if NFSCLIENT is defined without
...
NFSSERVER. (-Wall unused variable lossage)
1996-04-15 20:20:00 +00:00
60add3dea0
update for current state
1996-04-15 19:00:46 +00:00
1bd905d710
include <sys/termios.h> to make <dev/isa/comvar.h> happy, and set the
...
serial ('com') console bit size and parity to be "cs8 -parenb".
1996-04-15 18:58:20 +00:00
a610e9d471
include <sys/termios.h> to make comvar.h happy
1996-04-15 18:55:23 +00:00
b6549d493d
define and export the global variable "comconscflag", the default tty
...
'cflag' for the console. Normally set to TTYDEF_CFLAG, may be
overridden by machine-dependent console attachment code, as necessary.
(Alpha uses it to set cs8 -parenb.) Files including comvar.h now
need to include <sys/termios.h>, because comconscflag is of type
tcflag_t.
1996-04-15 18:54:31 +00:00
a5ba4721eb
Don't even check the not-yet-initialized mbuf pointers for being !=
...
NULL in the error exit code of arc_output(), else we see random data
and try to m_freem() it, panic'ing the machine.
1996-04-15 14:01:25 +00:00
e0afa4e4f9
Don't turn off the trace flag here; let sendsig() do it.
...
If in Linux emulation, send SIGSEGV for protection faults, rather than SIGBUS.
1996-04-15 00:20:32 +00:00
274c2bd80d
Add a prototype for generic_intr_establish(), the bus-independent
...
pmax interrupt-establish function.
1996-04-14 00:58:21 +00:00
28986d8126
Add cdev_decl() declarations for the "dtop", "fb" , and "rcons" drivers.
1996-04-14 00:56:59 +00:00
4a04d76c65
Fix the definition of TC_PHYS_TO_UNCACHED(addr): make it change a mips
...
kernel addressed to uncached space.
Add prototypes for pmax-specific TC functions used in probing for
a framebuffer console.
1996-04-14 00:55:19 +00:00
ff35ddbb2a
Update makeoptions to include 881 support
1996-04-13 19:12:46 +00:00
a0b7376b16
Add prototype and fix return type of blink() so "options BLINK" works
...
with -Wall -Werror
1996-04-13 17:40:03 +00:00
7e4d04910d
fix screw-up in the prototyping changes: print pointers with %p, NOT
...
by casting them to (unsigned int) then printing with %x.
1996-04-13 01:34:06 +00:00
e70b1375c9
add strncasecmp.c to ports' libkern Makefile.inc's. When adding a new
...
source file to libkern, it should be added to _ALL_ ports makefiles if
it is machine-independent and used by machine-independent code (in
this case adosfs). (There are several arguments that say that
strncasecmp should not be in libkern at all, and i think they're
good ones, but as long as ADOSFS needs it to link, it has to be here
for all architectures.)
1996-04-13 01:17:27 +00:00
98d92322b1
update for recent config changes: xxcd -> xx_cd
1996-04-13 00:31:37 +00:00
cad6c2d600
capitalize IRQ names here, to match what's reported on boot
1996-04-13 00:25:24 +00:00
21ac0b2a36
update for new ISA/EISA/PCI/'bus' interfaces. Untested
1996-04-13 00:24:30 +00:00
161623e54e
add (untested) support for EISA busses hanging off of PCEBs.
1996-04-13 00:23:34 +00:00
f32c94e82c
note that these IRQs are ISA IRQs
1996-04-13 00:22:58 +00:00
c0b2b5595c
Replace with completely new version derived from APECS code. No serious
...
bugs to fix (that i know of), just doing it that way was easiest.
1996-04-12 23:37:10 +00:00
56a6e33bb6
"Do over." Throw the old file away, replace it with a version hacked
...
from the current apecs_pci.c. This new version hopefully works for
the same sets of devices that that previous one did, and hopefully
will work for multi-function devices and for secondary PCI busses as
well. (looking at the code, there was no way the old one could have!)
1996-04-12 23:27:05 +00:00
e408d7413a
Fix __sysctl() to return the proper value to the caller, to match
...
documented behavior. sysctl(3) is documented to return 0 on success,
-1 on failure. The previous behavior was to return -1 on failure
and the number of bytes copied back down to user space.
Fixes part of PR #1999 , from Kevin M. Lahey <kml@nas.nasa.gov>
1996-04-12 23:21:37 +00:00
435c2f935e
config first, so there's someplace to cd to.
1996-04-12 20:27:42 +00:00
ae42d9fdbd
oops; forgot to remove a line of debugging/testing code
1996-04-12 20:22:14 +00:00
6e40f439fc
Part of restructuring done for 3-button mouse support.
1996-04-12 19:55:28 +00:00
4d91dc7c18
pull in ieeefp.h from m68k common area
1996-04-12 18:38:00 +00:00
cgd