c992c0b1e9
Match all PNP07?? IDs.
2003-11-03 19:03:40 +00:00
8a8efa0ccf
Use pmatch() so that we can use patterns.
2003-11-03 18:51:31 +00:00
d4f7d52915
Add a SMC ID.
2003-11-03 18:25:56 +00:00
4ac0e3e5c6
More cleanup:
...
* Use ACPI_FAILURE() and ACPI_SUCCESS().
* Output exception strings in a few more places.
2003-11-03 18:07:10 +00:00
b910c03a32
Clean up some messages:
...
* Use AcpiFormatException() in a bunch of places.
* acpi_resource_parse() already prints an error, so don't do it in the callers.
2003-11-03 17:54:39 +00:00
01558f7ee2
Clean up some messages:
...
* Use AcpiFormatException() in a bunch of places.
* acpi_resource_parse() already prints an error, so don't do it in the callers.
2003-11-03 17:24:22 +00:00
72ae89b69a
Fix locking protocol, and use _GLK appropriately. From kochi, with some
...
modifications.
2003-11-03 17:23:38 +00:00
05225cfc05
Add two new boot flags:
...
-x Boot with debugging messages (AB_DEBUG)
-z Boot silently (AB_SILENT)
2003-11-03 16:39:07 +00:00
78677ac649
Regen.
2003-11-03 15:58:48 +00:00
bda71e9e81
Add some IDs for the EPIA-M 10000 motherboard.
2003-11-03 15:57:46 +00:00
07a0e27c44
Revert the change in default value of ipv6_v6only. Further discussion
...
on this topic is required. It should be reintroduced and pursued in
the IETF.
2003-11-03 15:12:06 +00:00
953bcec0ab
ifmedia_set() should not panic, nor can it really fail. So if there is
...
some problem setting the media to the requested value (usually IFM_AUTO),
we now force the media selection to IFM_NONE.
This addresses PR/14029 ``panic("ifmedia_set") a little too brutal''
and may address to some degree PR/19504 and PR/23341.
2003-11-03 14:43:32 +00:00
84795bd3fd
* now the size of ACPI_DEVICE_INFO is variable:
...
it can now accomodate multiple _CIDs
sizeof(ACPI_DEVICE_INFO) should not be used
* make ad_devinfo member in acpi_devnode a pointer
* implement acpi_match_hid() to simplify matching devices;
_CIDs are also taken into account now as well as _HID
2003-11-03 06:03:47 +00:00
21978e6e0a
Add another item, and some comments on particular machines affected.
2003-11-03 05:41:06 +00:00
933834a7ae
revert rev.1.70 as it was not needed.
...
uvm_map_lookup_entry() should handle addresses out of the map.
2003-11-03 04:39:11 +00:00
efe5d5c154
make lint happy.
2003-11-03 04:20:28 +00:00
c8d12c1c35
retire PG_ZERO zero-fill checks. uvm_pagefree now check it for us.
2003-11-03 04:02:13 +00:00
70538d0c22
add a DEBUG check if freed PG_ZERO pages are really zero-filled.
2003-11-03 03:58:28 +00:00
8b115395c7
Fix uninitialized variable warnings
2003-11-03 03:05:25 +00:00
20a53a5841
Fix uninitialized error in pcib_print().
2003-11-02 22:03:42 +00:00
b9d5da7eda
The expansion bus is mapped via ixpsip now.
2003-11-02 21:27:51 +00:00
e9cd075343
It makes more sense to map the expansion bus registers in ixpsip
...
instead of the pci bridge driver.
2003-11-02 21:24:39 +00:00
21f388f6e0
Add generic read/write region 1 ops.
2003-11-02 21:20:32 +00:00
d94e36f311
Add another one.
2003-11-02 19:42:03 +00:00
0c6f824d5a
Fix LP64 bug.
2003-11-02 18:29:46 +00:00
a2ed003b8b
sa_yield(): 'sa' is used only for KDASSERT(), so make it #ifdef DEBUG
2003-11-02 17:04:05 +00:00
5e94c73334
kill unneded SYSVSHM includes
...
use ANSI C function definition for uvm_lwp_exit()
2003-11-02 16:53:43 +00:00
afee7aa4d7
Extend the #ifdef M68040 so that the `sig' variable declaration is moved
...
in as well, as it's otherwise not used. (from atari/atari/trap.c and
x68k/x68k/trap.c)
2003-11-02 16:49:38 +00:00
1cfc34d60f
use LIST_FOREACH() as appropriate
2003-11-02 16:42:22 +00:00
7d64ff943e
add /* nothing */ comment to cpu_wait()/cpu_swapout()
2003-11-02 16:37:09 +00:00
763d8350f0
perform indention change left out of previous commit
2003-11-02 16:30:55 +00:00
350dd95eff
Cleanup signal delivery for SA processes:
...
General idea: only consider the LWP on the VP for signal delivery, all
other LWPs are either asleep or running from waking up until repossessing
the VP.
- in kern_sig.c:kpsignal2: handle all states the LWP on the VP can be in
- in kern_sig.c:proc_stop: only try to stop the LWP on the VP. All other
LWPs will suspend in sa_vp_repossess() until the VP-LWP donates the VP.
Restore original behaviour (before SA-specific hacks were added) for
non-SA processes.
- in kern_sig.c:proc_unstop: only return the LWP on the VP
- handle sa_yield as case 0 in sa_switch instead of clearing L_SA, add an
L_SA_YIELD flag
- replace sa_idle by L_SA_IDLE flag since it was either NULL or == sa_vp
Also don't output itimerfire overrun warning if the process is already
exiting.
Also g/c sa_woken because it's not used.
Also g/c some #if 0 code.
2003-11-02 16:26:10 +00:00
914233e001
commands have grown, make the ramdisk bigger.
2003-11-02 16:02:09 +00:00
d9fc04266e
fix parallel build.
2003-11-02 16:01:16 +00:00
79f70b37d7
find libsa files.
2003-11-02 16:00:54 +00:00
ce7ac04a96
Extend the #ifdef M68040 so that the `sig' variable declaration is moved
...
in as well, as it's otherwise not used.
2003-11-02 15:55:16 +00:00
9f580c69ba
Oops, make it compilable with or without M68040.
2003-11-02 14:06:05 +00:00
ae50a81244
make it compilable.
2003-11-02 13:57:38 +00:00
8e83097ff5
fix return value of _gsfb_mmap().
2003-11-02 13:12:14 +00:00
c7058a99ee
Fix leftover of MI mk48txx(4) changes inside #if defined(SUN4).
...
Pointed out by Juergen Hannken-Illjes.
2003-11-02 12:59:18 +00:00
c8122b488e
The compiler doesn't know that setjmp() always returns 0 "the first
...
time around", so move the initialization of cp0 and cp15 to outside
the if() statement to make this compile again.
2003-11-02 12:39:30 +00:00
b74c137c2a
use LIST_FOREACH() where appropriate
2003-11-02 12:01:40 +00:00
159f73f5c9
Some possible MIDI input byte streams could cause sc->in_msg[]
...
to be overrun, causing a crash.
2003-11-02 11:56:36 +00:00
ec23fd5f28
properly initialize local variable in pnp_debugdump()
2003-11-02 11:32:03 +00:00
dfb3c51536
Fix some typos. From Tom Cosgrove via jmc@openbsd.
2003-11-02 11:14:22 +00:00
076f4674a8
acpi_res_parse_ioport(): if the added entry is next to a previous I/O port
...
entry, just expand the previous entry instead of adding separate mapping
apparently some BIOSes make separate I/O port entries like this, and
some drivers then fail to attach; this change fixes mappings like
fdc0: io 0x3f2-0x3f3,0x3f4-0x3f5,0x3f7 irq 6 drq 2
to
fdc0: io 0x3f2-0x3f5,0x3f7 irq 6 drq 2
change tested by Bernd Ernesti
2003-11-02 11:12:53 +00:00
c5670263e0
Fix some typos. From Tom Cosgrove via jmc@openbsd.
2003-11-02 11:07:44 +00:00
218b6186ff
deferred, not deffered. Inspired by Tom Cosgrove.
2003-11-02 10:50:40 +00:00
d88f7b1d62
boundary, not boundry. Inspired by Tom Cosgrove.
2003-11-02 10:31:06 +00:00
43b448a711
Redo previous so that it actually works - the OF node still is called "wdc"
...
but it is not the parent but the grandparent of the disk device now.
2003-11-02 10:13:23 +00:00
c0177219fe
Fix some typos. From Tom Cosgrove via jmc@openbsd.
2003-11-02 09:52:33 +00:00
0aca09fbc0
Fix two typos. From Tom Cosgrove via jmc@openbsd.
2003-11-02 09:49:20 +00:00
2cd9d70a98
Make the clock device aldo depend on mc146818, to make kernels without
...
the 'rtc at ebus' driver configured (e.g. for sbus machines) link.
2003-11-02 09:33:56 +00:00
20db9285ba
Kill trailing blank lines.
2003-11-02 08:29:06 +00:00
38dd4ae2dc
Initialize another fp instance
2003-11-02 08:27:41 +00:00
6dba5c3bc3
only assign to fp when we have a valid lwp. Thanks simon
2003-11-02 08:20:48 +00:00
df7d5f4716
Use siginfo_t not ksiginfo_t in the frame. Doh!
2003-11-02 08:20:09 +00:00
c6d9c8814d
fix a wrong assertion. pointed by Christian Limpach.
2003-11-02 07:58:52 +00:00
82097fd078
Fix PCMCIA attach messages for wi(4). Tested by Greg Troxel.
2003-11-02 03:31:29 +00:00
6892b91b88
No need to check which state we're changing FROM when we deactivate
...
the scan callout.
2003-11-02 02:14:33 +00:00
313961b974
Get a clue from ath(4) and move the ieee80211_new_state() calls in
...
atw_init to one place.
2003-11-02 02:05:15 +00:00
3800e8585a
Fix thinko that breaks IBSS merges in atw(4). sc->sc_opmode !=
...
ic->ic_opmode!
2003-11-02 01:58:22 +00:00
76db6bfa8c
Use ieee80211_find_rxnode to attribute Rx packets to the write
...
ieee80211_node. This reduces code duplication. It will help us
support passive scanning and rate adaptation.
2003-11-02 01:55:40 +00:00
1d2bfa591d
Implement a separate nsphy_reset(). There are two reasons for this:
...
1) This PHY can take an inordinate amount of time to reset if
media is attached. Under fairly normal circumstances, up
to near one second. This is because it appears to go through
an implicit autonegotiation cycle as part of the reset.
2) During reset and autonegotiation, the BMCR will clear the reset
bit before the process is complete. It will return 0 until the
process is complete and it's safe to access the PHY again.
This gets the on-board pcnet + nsphy ethernet working properly for me on
an IBM PC Server/325. Fixes PR/16346.
2003-11-02 01:42:28 +00:00
45f756f520
Mark the available channels using the ic_channels table instead of
...
setting bits in ic_chan_avail, which is the responsibility of
ieee80211_ifattach. I cannot believe the previous code worked.
2003-11-02 01:39:22 +00:00
85f84a3155
Cosmetic: get rid of an indent level in ieee80211_find_txnode by
...
changing an if () ... else to an if () return.
2003-11-02 01:29:05 +00:00
f64ab7b2a4
Get the ieee80211_node for management packets from the rcvif field.
2003-11-02 00:55:46 +00:00
60e46c0cc8
Finnally, the missing field in IOHIDSystem keyboard events was identified. The
...
keyboard now works in XDarwin. Hurrah!
2003-11-02 00:44:19 +00:00
dec320ebc1
Squish some recent compiler warnings.
2003-11-02 00:23:38 +00:00
bf9644d3d3
Fix bugs in power-saving:
...
Use a power-saving station's ieee80211_node, which is stored in
the rcvif field.
Do not free a node if it is put onto the power-saving queue.
2003-11-02 00:22:49 +00:00
22f9e4aae7
On the output path, save a power-saving station's ieee80211_node
...
in the mbuf's rcvif field so that the driver can get at it.
2003-11-02 00:17:27 +00:00
e3bc096fe4
Bug fix: in wi_cfg_txrate, do not divide the 802.11 rate by 2 and
...
take off the flags before giving it to wi_write_txrate.
Also add a useful debug message to wi_write_txrate.
2003-11-01 23:57:05 +00:00
4e923603f1
Fix for PR # 23264 thanks to Mike Pumford; it is only attatching clock once
...
now.
2003-11-01 23:37:54 +00:00
e45065a344
Dropped a word...
2003-11-01 23:22:54 +00:00
c4330d824f
A small list of things needed here.
2003-11-01 23:22:21 +00:00
bd0f8ee224
- Adapt to MI mk48txx(4) changes.
...
- Switch rtc (M5819) routines to use MI mc146818(4) driver.
Tested on Ultra5 (mkclock_ebus), but mkclock_sbus and rtc_ebus are not tested.
XXX This file should be split into each device and each bus attachment,
XXX and moved into sys/arch/sparc64/dev or sys/dev/sun.
2003-11-01 23:04:32 +00:00
deb5638bdc
Adapt to MI mk48txx(4) changes.
...
Tested on SS1+ (mainbus), but not tested on sun4/sun4m (obio).
XXX maybe this file should be split into mainbus and obio attachments
XXX and moved into sys/arch/sparc/dev or sys/dev/sun.
2003-11-01 22:59:24 +00:00
4b29327094
Don't bothering reinitializing the sensor name strings when the battery info
...
is updated. Do print out the battery manufacturer info, though. (It's too
bad we can't return this through envsys........)
2003-11-01 22:55:53 +00:00
4e8b58dd02
- Adapt mkclock_isa.c to MI mk48txx(4) changes.
...
- Switch mcclock_isa.c to use MI mc146818 driver.
- Use todr(9) interface with both todclock drivers.
2003-11-01 22:54:46 +00:00
2ddfa78de4
Adapt MI mk48txx(4) changes. Tested on NWS-3470D (hb) and NWS-5000X (apbus).
2003-11-01 22:50:45 +00:00
164022f59e
Adapt MI mk48txx(4) changes. Tested on NWS-1750.
2003-11-01 22:49:38 +00:00
97717cc9f4
Adapt MI mk48txx(4) changes. (compiles but untested)
2003-11-01 22:48:01 +00:00
6fa76b3b92
No need to include <dev/ic/mk48txxreg.h> here.
2003-11-01 22:42:23 +00:00
614e6d4de9
Cleanup MI mk48txx(4) todclock driver:
...
- Prepare mk48txxvar.h and leave only register definitions in mk48txxreg.h.
- Define struct mk48txx_softc as usual devices and allocate necessary
members like struct todr_chip_handle in it.
- Change mk48txx_attach(), mk48txx_nvwr() and mk48txx_nvrd() to take
struct mk48txx_softc.
2003-11-01 22:41:42 +00:00
ab09fdd80e
Rename flag NO_CENTURY_ADJUST -> MC146818_NO_CENT_ADJUST to avoid conflicts.
2003-11-01 21:58:43 +00:00
31806f9f22
One more spot for a structure change.
2003-11-01 20:58:33 +00:00
f557964d0c
Quell an uninitialised variable warning.
2003-11-01 20:04:57 +00:00
142a2d4058
- update uvm_map::size fewer places.
...
- add related assertions.
2003-11-01 19:56:09 +00:00
c45bf442f2
commit rest of the previous (rbtree).
...
(i should check .rej files before commit, sorry)
2003-11-01 19:45:13 +00:00
64f5a4d263
make this compilable again with ACPI_DEBUG.
2003-11-01 19:24:42 +00:00
c747a93798
Count necpb interrupts with evcnt(9).
2003-11-01 19:23:52 +00:00
c224a63428
use fdremove to remove kqueue file descriptor so that bitmap information
...
is maintained correctly; found by Juergen Hannken-Illjes
2003-11-01 18:47:16 +00:00
bb7e6443cb
Remove all our real devices from the IOKit registry, as they won't be
...
usefull. Emulate only IOHIDSystem, IOFramebuffer and friends in the
registry.
ioreg is able to display the tree and dump the properties.
2003-11-01 18:41:25 +00:00
1dc67abbb1
Compile at -O2. Fix various GCC3-isms
...
XXX mem.c still fails to assemble.
2003-11-01 18:23:37 +00:00
8f8952e2b1
add a macro to copy ksiginfo_t, and use it in kern_sig.c:ksiginfo_put()
...
change suggested by Christian Limpach
2003-11-01 17:59:57 +00:00
518c5a2e6a
Fix an uninitialized warning.
2003-11-01 17:48:20 +00:00
3abecdb88d
avoid stong words in comments
2003-11-01 17:35:42 +00:00
d800494086
Based on the historic hp300 pmap, initialize firstpage to TRUE, and
...
negate that after processing the first page.
2003-11-01 17:16:30 +00:00
467746e275
avoid strong words; use 'screw' instead
2003-11-01 17:00:49 +00:00
5d2db86263
cleanup whitespace and debugging output
2003-11-01 15:36:35 +00:00
22c1eedd0c
Initialize needcflush to FALSE in pmap_do_remove().
2003-11-01 15:32:47 +00:00
fe3e5aa0b8
as we know PTPs are zero-filled when being freed,
...
mark them PG_ZERO so that they'll be used to serve UVM_PGA_ZERO requests.
2003-11-01 15:21:02 +00:00
d6dc30aeba
in uvm_pagefree and friends, if freed pages have been marked by
...
PG_ZERO flag, put them to PGFL_ZEROS queue rather than default one
so that we can re-use zero-filled pages efficiently.
2003-11-01 15:18:42 +00:00
e36739df67
use explicit "l" suffixes.
...
(xor -> xorl)
2003-11-01 15:14:27 +00:00
fe1d71458c
- Flush cache only if mips_sdcache_line_size == 0 in pmap_copy_page() when
...
options MIPS3_L2CACHE_ABSENT is defined.
- Fix comments following #endif for MIPS3_L2CACHE_ABSENT.
2003-11-01 14:48:16 +00:00
c12a055f27
g/c index.c and rindex.c (not used anywhere)
2003-11-01 13:17:01 +00:00
d944bca949
rename local index() to strchr()
2003-11-01 13:02:04 +00:00
917bc10805
g/c local index() routine and switch to (libkern's) strchr()
2003-11-01 12:56:32 +00:00
0ce8029b4c
shutup one bogus -Wunitialized warning, and fix one correct
...
XXX parrw() routine looks like not actually correct for transfers
XXX larger than sc_burst - someone with the hardware should check & fix this
2003-11-01 12:53:33 +00:00
ca2d6f9331
drop register qualifiers
2003-11-01 12:43:30 +00:00
8064ffcedd
fix several places where variables might be used uninitialized
2003-11-01 12:41:59 +00:00
aae2faadc5
the storagesize parameter of extent_create() is a size_t, not a pointer
2003-11-01 12:21:14 +00:00
5a088df3e8
mem_exists(): pacify one apparently bogus -Wuninitialized warning
...
setmemrange(): add default case for cputype (same as CPU_68030), to fix
a potential uninitialized use
2003-11-01 12:18:55 +00:00
b1686553ae
drop register qualifiers
2003-11-01 11:50:53 +00:00
a51175c327
fix potential use of uninitialized local variable 'error'
2003-11-01 11:44:46 +00:00
57e554da69
track map entries and free spaces using red-black tree
...
to improve scalability of operations on the map.
originally done by Niels Provos for OpenBSD.
tweaked for NetBSD by me with some advices from enami tsugutomo.
discussed on tech-kern@ and tech-perform@.
2003-11-01 11:09:02 +00:00
efe8779bb3
Provide percentages for the threshold values too.
2003-11-01 10:55:12 +00:00
922ad03e28
don't try to lookup addresses out of the map in uvm_coredump_walkmap().
2003-11-01 10:43:27 +00:00
7be875cdd8
Whoops, made a typo there.
2003-11-01 10:25:35 +00:00
cf1951c350
Split "load" into "charge rate" and "discharge rate", depending on the state
...
of the battery.
2003-11-01 10:24:17 +00:00
ac30bfe8d4
Remove nonexistent arch/pmax/pmax/mcclock.c. (pmax uses dev/dec/mcclock.c)
2003-11-01 09:52:19 +00:00
5c001506f5
Small change to use the "last full capacity" as the capacity maximum.
2003-11-01 09:49:45 +00:00
007e2cd3b4
There's no need to clear the data_s fields now that the VALID bits are correct.
2003-11-01 09:41:25 +00:00
f41e60e6a0
as there shouldn't be any mappings when pmap_destroy() is called,
...
assert there is no remaining PTPs at that point.
2003-11-01 09:07:11 +00:00
be8e41d93a
sc_lockhandle is garbage.
2003-11-01 08:34:54 +00:00
10e36668fc
Remove an unnecessary call to AcpiGlearGpe().
2003-11-01 08:27:37 +00:00
b596969039
Correct arguments to AcpiClearGpe().
2003-11-01 08:14:39 +00:00
ff9f7d764c
Do not install address handlers before calling AcpiEnableSubsystem() -- this
...
is done by AcpiInitializeObjects() anyway.
2003-11-01 08:03:24 +00:00
0b33ae64cb
in sigtimedwait(), use malloc(9)ed (and thus wired) memory for the waitset
...
we pass via sigctx, so that it guaranteed that the memory wouldn't be
paged out at the time the signal arrives
potential problem pointed out by YAMAMOTO Takashi
2003-11-01 07:44:14 +00:00
ddb8b44bce
include opt_malloclog.h
2003-11-01 07:07:31 +00:00
d7f9038062
Add MALLOCLOG
2003-11-01 06:50:13 +00:00
4f800421dd
Use be*toh() and htobe*() to permit use in cross-build environments. Add -h flag to override default volume header size.
2003-11-01 06:30:44 +00:00
70f5a0a5b2
cache_r10k.c rev. 1.1 is broken. Because,
...
1) R10k uses VA0 to select cache ways, but in rev. 1.1, VA14
is used instead.
2) R10k does not support HitWriteBack and should map HitWriteBack
to HitWriteBackInvalidate, but in rev. 1.1, HitWriteBack is not
handled properly.
So, cache_r10k.c rev. 1.1 was replaced by new implementation.
2003-11-01 04:42:56 +00:00
6831bfd482
Remove some unused #defines.
2003-11-01 03:45:58 +00:00
72b8dfe22a
In hd64461video_update_videochip_status init depth to supress bogus
...
-Wuninitialized.
2003-11-01 03:45:52 +00:00
8dc2532a4f
Update copyright.
2003-11-01 03:45:48 +00:00
e9dc4000d1
XXX: Init dummy variable that we only use in asm() to pacify
...
XXX: -Wuninitialized. There must be a better way.
2003-11-01 03:24:12 +00:00
289bc4802a
#include "debug_kloader.h"
2003-11-01 02:29:08 +00:00
818209017c
In intc_intr_priority init iprreg to pacify gcc.
2003-11-01 02:24:49 +00:00
f6e633af3a
- add missing P_WEXIT check
...
- assign lwp to sa_vp before setting P_SA/L_SA flags
- don't unlock/lock the kernel lock around mi_switch unnecessarily
2003-11-01 02:09:52 +00:00
b936d40f39
Avoid sneaking past signal delivery in sa_upcall_userret():
...
generate unblocked upcalls in sa_unblock_userret(), before signal
delivery/p_userret handling in userret().
Also defer getting state for preempted upcalls because on some ports
preemption can happen between sa_unblock_userret() and sa_upcall_userret().
2003-11-01 01:38:46 +00:00
63bc27bf55
Correct arguments to AcpiInstallGpeHandler, as per Linux and FreeBSD.
2003-11-01 01:38:25 +00:00
8632b558b7
Move a declaration.
2003-11-01 01:03:23 +00:00
762ffea0a4
Build again whereas I removed adarwin_ioresource.c (removed before it
...
was committed...)
2003-11-01 00:42:04 +00:00
53b35abfa2
Parent itarators in the IOKit emulation. A driver can only
...
have one parent yet (on Darwin, multiple parents are possible: the IOKit
seems to handle a graph more than a tree). Introfuction of a keyboard
driver parent for IOHIDSystem.
The kernel keymapping is still a big mystery.
2003-11-01 00:32:44 +00:00
8edffb7356
Avoid race condition where an LWP is put into the cache before
...
its state is saved:
- don't sa_putcachelwp() in sa_vp_repossess/sa_vp_donate
- only defer saving the event LWP's state
- sa_putcachelwp() after the interrupted LWP's state is saved
2003-10-31 23:36:50 +00:00
8904362ede
Allow defer of event and interrupted LWP state independently.
...
Removes code duplication in sa_upcall_getstate() and allows
sa_upcall_getstate() to be used to get state of a single LWP.
2003-10-31 22:47:44 +00:00
def5d22a63
Don't PHOLD() in sa_putcachelwp() because the scheduler lock is held.
...
PHOLD() before grabbing the scheduler lock unless the lwp is curlwp.
2003-10-31 22:03:18 +00:00
0ec2bd2926
Whoops, forgot the /10 in the default case.
2003-10-31 21:52:11 +00:00
a4061d6dec
Update for structure changes.
2003-10-31 21:49:39 +00:00
3c3855c148
Print out the polling interval, and display a less confusing message if _TZP
...
is not defined.
2003-10-31 21:44:50 +00:00
fbd3c995b1
Remove an outdated comment.
2003-10-31 21:39:51 +00:00
e6f9248f47
Use aprint_*(9) instead of printf() in attach routines.
2003-10-31 21:25:09 +00:00
ab3d5bdcea
Catch up with the new acpica code.
2003-10-31 20:56:55 +00:00
fec4c11f9e
Catch up with ABI changes in ACPI-CA. Some additional changes to acpi_bat to
...
set the VALID bits correctly, so we don't report garbage for missing batteries.
2003-10-31 20:54:18 +00:00
3970401fd9
Add a file.
2003-10-31 20:52:47 +00:00
ded1804c79
Catch up with changes to the AcpiOs*() interfaces.
2003-10-31 20:52:30 +00:00
6c29cf39bb
Merge acpica-unix-20031029.
2003-10-31 20:51:07 +00:00
0314a111c1
Import latest ACPI-CA.
2003-10-31 20:47:38 +00:00
9cc6a54d18
Don't attach zs at mainbus.
2003-10-31 20:10:06 +00:00
5a0a3beffd
Attach zs to sbus only, current driver cannot attach to mainbus.
2003-10-31 20:06:54 +00:00
31273d1288
We were passing flags to AcpiEnableSubsystem() that aren't even used there.
...
Call AcpiInitializeObjects() to create global variables and run _INI methods.
2003-10-31 17:22:28 +00:00
f0b481ee05
Swap the order of buffer initialization and _STA/_INI execution. _INI methods
...
sometimes want to store data in global buffers (e.g. on the Inspiron 8500, to
remember initial battery status).
2003-10-31 17:21:01 +00:00
d135aa4588
In swap_endian_disklabel(), don't forget copy members which are not
...
needed to byteswap.
2003-10-31 17:04:12 +00:00
b4c2d3dbb0
Insert some nops around the load instructions in badaddr_read_N().
...
That way, we can be sure any imprecise data abort actually happens
before clearing pcb_onfault.
2003-10-31 16:54:05 +00:00
ef56cc40ab
Reduce code duplication by adding mi_userret() in sys/userret.h
...
containing signal posting, kernel-exit handling and sa_upcall processing.
XXX the pc532, sparc, sparc64 and vax ports should have their
XXX userret() code rearranged to use this.
2003-10-31 16:44:34 +00:00
336806eb55
Overhaul arm32's abort handlers:
...
- Assume a permission fault is always the result of an attempted
write, so no need to disassemble the opcode.
(as discussed with Richard Earnshaw/Jason Thorpe a week or two ago)
- Split out non-MMU data aborts into separate functions, and deal
correctly with XScale imprecise aborts. Specifically, the old code
made no attempt to handle the double abort faults which can occur
as a result of two consecutive external (imprecise) aborts. This
was easy to provoke by read(2)ing from a /dev/mem offset which caused
an external abort. With the old code, this would bring the system
down instantly, with little clue as to why. (hint: tf_spsr held
PSR_ABT32_MODE...)
- Re-write badaddr_read() to use pcb_onfault instead of adding extra
overhead to data_abort_handler(). A side effect of this is that it
now benefits from the XScale double abort recovery.
- Invoke the cpu-specific prefetch/data abort fixup routines only if
the host cpu actually needs it. On other cpus, the code is optimised
away.
- Sprinkle __predict_{false,true} in all the right places.
- G/C some excess debugging baggage.
2003-10-31 16:30:15 +00:00
2564505612
In sci_scsipi_request, add a splbio() which was erroneously missed when
...
thorpej_scsipi was integrated. Pointed out by Havard Eidnes.
2003-10-31 14:38:44 +00:00
22f94d4a8e
Rollback
2003-10-31 14:22:48 +00:00
0622a85590
don't need ELF_INTER_NON_RELOCATABLE anymore if no COMPAT_16, from simonb
2003-10-31 14:06:29 +00:00
714de0452f
adapt for changes to kern/exec_elf32.c
2003-10-31 14:04:35 +00:00
24082a2293
-ELF_LINK_ADDR does now what irix_load_addr() did, so the latter can
...
be nuked
-adapt for changes to kern/exec_elf32.c
2003-10-31 14:04:04 +00:00
f1aa108dd8
-fix ELF_INTERP_NON_RELOCATABLE:
...
-obey ELF_LINK_ADDR in ELF_load_file()
-set ELF_LINK_ADDR in the probe() function if needed
-make ELF_NULL_ADDR the default, so that probe() functions dont need
to set it explicitely
-allocate buffer for interpreter name only if needed
2003-10-31 14:00:52 +00:00
c3b75d203e
introduce another "magic" ELF address to tell that the file has to be
...
mapped at the address it was linked for
2003-10-31 13:54:39 +00:00
a0f1b459d6
Make it compile under gcc 2.95 again. Without the patch it gives an `might
...
be used uninitialised' warning.
2003-10-31 13:47:00 +00:00
382038b55b
Make it compile under gcc 2.95 again. I guess the initialisers were
...
stripped in the NULL = 0 -> NULL = (void *) 0 conversion.
2003-10-31 13:43:15 +00:00
ef301d7a07
Remove memset prototype. Already present in sys/lib/libsa/stand.h.
2003-10-31 10:49:25 +00:00
26aa3703e4
auich_calibrate():
...
- make the buffer longer to improve the precision of measurement
- round off the result to the nearest multiple of 1000.
2003-10-31 08:15:53 +00:00
51cdfee682
Added stpcide(4) driver for STMicroelectronics STPC IDE controllers.
2003-10-31 06:49:58 +00:00
183066a619
Remove some assigned-to but otherwise unused variables.
2003-10-31 03:32:19 +00:00
b6da47eedd
Retore the spl level on exit of genDeconfigMouse().
2003-10-31 03:29:59 +00:00
6d85c5e0d5
Don't pass the (unused) return value args to the
...
trace_enter()/systrace_enter() functions.
2003-10-31 03:28:12 +00:00
c8e97f8a45
When signaling SIGTRAP for debugger break adjust pc to point back to
...
the TRAPA instruction. This makes gdb much happier.
2003-10-31 02:59:29 +00:00
811af2c58f
tlb_exception: pacify -Wuninitialized by adding default case.
2003-10-31 02:46:58 +00:00
920b229e72
"bogus pin" -> "bogus device" in last change.
2003-10-31 01:12:06 +00:00
68a0d153d2
Don't grab the sched lock in lwp_continue() because lwp_continue() is
...
called from kpsignal2() with the sched lock held. Get the lock in
sys__lwp_continue() instead.
2003-10-30 23:31:21 +00:00
22b4a90181
Fix another lasttx uninitialized variable
2003-10-30 23:05:56 +00:00
88810a30df
Fix uninitialized variable warning.
2003-10-30 23:05:07 +00:00
617742615c
It turns out the hppa ABI we're using does not support an extended-
...
precision type, so drop the library support for now but leave in place
(#ifdef _LP64) the header definitions.
2003-10-30 22:46:17 +00:00
fbcc3c4d38
Fix real uninitialized variable bug.
2003-10-30 22:35:38 +00:00
a52e0441cf
Add include of <lib/libsa/stand.h> for memcpy() and memset() prototypes.
2003-10-30 22:27:05 +00:00
b569a45229
Fix indentation/whitespace.
2003-10-30 22:25:42 +00:00
4f5db11dc0
Add -I${S} for <lib/libsa/stand.h> inclusion, and add
...
include of ../Makefile.booters for -ffreestanding.
2003-10-30 22:23:51 +00:00
da61544d69
Add .rodata.str1.1 to the text segment, and discard the .comment section.
2003-10-30 22:21:56 +00:00
a2498bfff8
Add -ffreestanding to CFLAGS to avoid type conflicts with built-in
...
functions in gcc.
2003-10-30 22:20:43 +00:00
202ba2bdcf
Add a prototype for memset().
2003-10-30 22:15:28 +00:00
68a1d153b6
Use ratecheck() to prevent envstat(1) doing many ACPI calls at once. Now my
...
MP3 player doesn't skip...
2003-10-30 22:12:02 +00:00
b9e31106e8
Stop some (bogus) gcc unitialized variable warning.
2003-10-30 22:04:39 +00:00
a72426fa60
Fix (real) uninitialized error. (Someone familiar with this should see
...
if is really an error).
2003-10-30 22:03:46 +00:00
7d342b5852
* keep track of PCI buses that aren't known by firmware, but are found
...
by NetBSD
* use this info in in intr_find_mpmapping
* get rid of the last argument to intr_find_mpmapping, it was redundant
2003-10-30 21:19:54 +00:00
ab3d7937b5
Fix uninitialized warning.
2003-10-30 21:19:02 +00:00
cf19625775
Make this compile with 32bit kernels.
2003-10-30 21:02:55 +00:00
559255f8db
there is no SHMMMNI
2003-10-30 20:37:01 +00:00
95dfd3bd55
Use AcpiEvulateObjectTyped() to simplify some code.
2003-10-30 20:29:54 +00:00
5a5cdb5717
Add -ffreestanding to CFLAGS, to avoid type conflicts with built-in
...
functions in gcc.
2003-10-30 20:19:25 +00:00
d96125aa86
For ICH4/ICH5, set IOSE flag to make them compatible to old ICHs.
2003-10-30 19:33:51 +00:00
9e419e7a10
Check to see if we have valid status info before looking at it.
2003-10-30 19:33:24 +00:00
c88bf03d33
For ICH4/ICH5, set IOSE flag to make them compatible to old ICHs.
2003-10-30 19:30:26 +00:00
208fa12050
Remove another extra AcpiGetObjectInfo().
2003-10-30 18:15:35 +00:00
97fa5fbf36
Minor tweaks:
...
* Only fetch the object info a second time if we activated the device.
* Do not attempt to activate a device with no HID.
2003-10-30 18:13:38 +00:00
3dc763c88b
Patches from Christos to fix double-frees and error handling.
2003-10-30 17:46:08 +00:00
5a9f1cf173
ksiginfo_put(): only copy what's needed of ksiginfo_t, to slightly optimize
...
the operation, and improve code readability at the same time
2003-10-30 16:32:58 +00:00
4c1141b840
t_pgrp can be null.
2003-10-30 14:51:01 +00:00
6d25a1e180
Don't define __HAVE_LONG_DOUBLE for __mc68010__.
2003-10-30 13:18:24 +00:00
d1ef336230
Fix a typo so that hack actually takes effect.
2003-10-30 12:30:39 +00:00
fed901e1cd
s/sgn/sign/, for consistency with IEEE headers.
2003-10-30 12:05:41 +00:00
c0818405f1
Complete last commit: Remove assigned-to but otherwise unused variable.
2003-10-30 10:02:16 +00:00
f66caac2c0
Change __const to __pure for function return type.
2003-10-30 09:25:00 +00:00
7a55b436b2
Move the alignment fault enable/disable code into macroes to avoid
...
needless duplication.
Additionally, merge AST handling into the same code.
exception.S and the generic irq_dispatch.S routines have been updated
to use the macroes.
XXX: I have patches for the non-generic IRQ dispatch routines, but they
need testing by someone with hardware.
2003-10-30 08:57:24 +00:00
97e37b6030
In bus_dmamap_sync(), we can no longer rely on the data cache being
...
flushed on every context switch as an indicator that a mapping is
not resident in the cache.
Instead, used the per-pmap flag maintained by the cpu_switch/pmap code.
2003-10-30 08:44:13 +00:00
6431c35748
This driver was broken by bouyer on 2003/01/20.
...
I've made it at least config up/down again -- haven't tried actually passing
traffic.
2003-10-30 07:47:57 +00:00
4b425670af
use a two-level bitmap as suggested by mogul and banga for fdalloc;
...
approved thorpej@
2003-10-30 07:27:02 +00:00
654720aaa9
Set MAXPHYS to 0xe000.
...
XXX This really is the wrong way to do this.
2003-10-30 06:22:53 +00:00
c948a7f77b
Allow a port to override MAXPHYS.
2003-10-30 06:13:19 +00:00
1687658251
Add COMPAT_16.
2003-10-30 05:31:17 +00:00
1a2ab14519
In the 68010 code, we were reading sched_whichqs wrong...
2003-10-30 05:12:28 +00:00
67f69c1c63
Make callout_setfunc() a CPP macro. Suggested by enami.
2003-10-30 04:32:56 +00:00
3c59c821ae
Make sure we can transmit larger packets correctly.
...
Don't initialize extra fields of the ifp.
Use strcpy() instead of bcopy() for copying the device name.
Handle if_timer a bit better.
2003-10-30 04:11:36 +00:00
b6abb6ab1d
Remove some assigned-to but otherwise unused variables.
2003-10-30 01:58:17 +00:00
a2facef339
Remove some assigned-to but otherwise unused variables.
2003-10-30 01:43:08 +00:00
2c8096f763
set the onstack flag if requested.
2003-10-30 00:26:54 +00:00
0c6a00f6c6
KNF.
2003-10-30 00:01:47 +00:00
31d051445b
Make this 64-bit paddr_t friendly.
2003-10-29 23:52:22 +00:00
dc307db22e
add compat_16_machdep.c
2003-10-29 23:41:49 +00:00
0bf7a721e9
Add some more MTI CPU ids.
2003-10-29 23:41:10 +00:00
61e4914300
first pass siginfo for mips
2003-10-29 23:40:42 +00:00
8ca558e8ed
first pass siginfo glue for mips
2003-10-29 23:39:45 +00:00
a5ace5a563
Add some more MIPS vendor IDs.
2003-10-29 23:39:16 +00:00
ab8cc2146b
Don't try to build random.S on 68010.
2003-10-29 23:32:15 +00:00
363f05d417
Refresh from libc to get 68010 version.
2003-10-29 23:19:11 +00:00
f974ecc32b
Remove check for the error register value at probe time. There have been report
...
on -current-users of some drives not returning the proper value here.
This shouldn't affect the probe time for the common cases.
2003-10-29 22:09:41 +00:00
14cd9d8cff
freese->freeze, as pointed out by Frederick Bruck.
2003-10-29 22:05:15 +00:00
b94b22f9f5
; -> \n\t in a few more places. Fixes problems with HPPA, where ; is the
...
comment separator in the assembler.
2003-10-29 21:56:02 +00:00
3ed4d1ac9f
Add ieee80211_find_rxnode and its helper ieee80211_needs_rxnode.
...
802.11 drivers will use ieee80211_find_rxnode to match each received
packet with the ieee80211_node belonging to the sender. The driver
will use the ieee80211_node to track the sender's RSSI and other
statistics for, e.g., rate adaptation.
ieee80211_find_rxnode "fakes-up" missing ieee80211_nodes in IBSS
mode and in ad-hoc demo mode when it is appropriate. See the comments
in the source.
Also add ieee80211_find_txnode, which looks up the ieee80211_node
belonging to a MAC destination. ieee80211_find_txnode will also
fake-up missing nodes in IBSS/ad-hoc demo mode.
In ieee80211_encap, use ieee80211_find_txnode. This fixes the bug
in ad hoc packet-transmission reported by Greg Troxel, Urban Boquist,
and Kurt Schreiner.
2003-10-29 21:50:57 +00:00
ef9a315b24
- test if we have some work to do before tsleep() in the kernel thread,
...
in case the previous loop scheduled some more work to do (e.g. reset)
- use queue_freese to block the queue when a reset is pending too
- Avoid using WDCF_TH_RUN in some place that can be called from callout.
If the kernel thread is tsleep()ing somewhere, we may come here with
WDCF_TH_RUN set while being in the callout context. Fix a panic() in
tsleep() reported by Chuck Silvers.
- Use AT_WAIT instead of WDCF_TH_RUN wdcwait(), as we may not be in the
channel's thread context but still be able to tsleep(). Fix queue_freese
panics for WDC_CAPABILITY_NOIRQ controllers (port-mac68k/23208 by
Frederick Bruck).
2003-10-29 21:44:41 +00:00
7198dd0a88
Back out -Wno-uninitialized for m68k -- the compiler bug is fixed.
2003-10-29 21:29:27 +00:00
3fbc866a6e
Back out the bogus initializer -- the compiler bug is fixed.
2003-10-29 21:26:43 +00:00
18b32ac5ba
Switch arc to use MI mc146818 tod driver.
2003-10-29 18:17:49 +00:00
21ebbd9f3e
Add a bogus initializer to appease gcc's uninitialized warning.
...
XXX osiop_checkintr() should be rewritten.
2003-10-29 18:03:22 +00:00
cb187dc1a7
Fix bogus GCC uninitialized variable warning.
2003-10-29 18:01:20 +00:00
mycroft