can then access the page table entries directly using user data space with
the MOVES instruction. This should resolve the problem on the Duo 2x0
series with hard hangs in this function.
Warning: do not call any function that accesses user data space (FC $1)
from get_pte()!
- Figure out what CPU we have, rather than assuming the Booter knows,
and set cputype variable accordingly.
- Carefully rearrange the order of various MMU/ATC operations so as to
eliminate possible side effects. Also, re-order the initial bootstrap
code to make clear what various sections of this code do.
- Adjust to combined initenv()/genenvvars() (the latter has assimilated
the former).
- Add a function code argument to ptest040().
- Use symbolic constants from assym.h where appropriate (and defined).
- Some style cleanup.
- Combine initenv() and getenvvars().
- Hardwire some PowerBook internal video addresses, from Takashi Hamada.
- When printing out the machine model/CPU, use the new cputype variable
instead of the Booter's PROCESSOR environment variable.
- Use new ptest040() function code argument (though for now, the MMU is
disabled on the 040).
- Revert previous change in get_physical() that seems to have broken
some machines; use an ADD instead of an OR when determining the PA.
- Some (very minor) style cleanup of asm code.
- Always ensure that RAW_PART ("c") can be opened.
- Disallow unused or non-existent partitions from being opened.
- Don't do bounds checking or partition translation on RAW_PART.
This is consistent with other disk drivers in the NetBSD source tree,
and fixes a condition where the user could not fix a corrupted disklabel
due to a bogus offset for partition "c".
ends for irq_claim() and irq_release() that will allocate and free
memory for the irqhandler structure.
Added an irqblock array that provides a quick reference to all the
interrupts that should be blocked when a particular interrupt is
received. The irq_claim() and irq_release() functions now update the
irqblock array.
Impelemented a fix for kernel locks when opening the serial post :
Revisions A->D of the SMC FDC37GT665 Peripherial controller have
a bug in the serial port that is triggered if the FIFO is enabled
while there is a byte in the rx data register resulting in the
rx ready bit being permenantly set.
podule space.
Fixed a bug in the reading of bytes from network slot cards that prevented
the correct reading of the network slot ROM description.
config code now allows duplicable devices to be attached.
For some reason it wouldn't get positioned right when mapped in through the
blitter memory mapped location, so switched to the register mapping, which
works.
XXX colormap handling for the cursor is still broken.
getting the 'bootpreference' ourselves when it is not set to any legal
value.
- Because the relation between memtop/membot and the video base does not
hold on the Hades, skip testing on it.
* Add IPL_HIGH. Alias IPL_HIGH to IPL_RTTY
* Define splrtty (used by the scn driver).
* Add iv_level and iv_mask to struct iv. These define the IPL at
which the handler should run.
* intr_establish now takes *two* ipls. One at which the handler should run,
and one in which the interrupt should get blocked.
* Define SCN_RING_HIWAT and add sc_rbhiwat to scn_softc. When the
ringbuffer gets full up to this mark, rts gets asserted (Ian Dall).
* Add sc_rx_blocked to scn_softc. This is used to tell scnsoft that
rxinterrupts are blocked (Ian Dall).
* intr_establish now takes *two* ipls. One at which the handler should run,
and one in which the interrupt should get blocked.
All the following changes were provided by Ian Dall:
* Remove SCN_HSOFT. Now that the pc532's software interrupt system is running
from int14, this won't work anymore.
* Add code to detect uart type (SCN2681, SCC2692 or SCC26C92).
* Cleanup my RECOVER mess. Thank's to Ian Dall for reading the datasheet
and removing all the unnecessary RECOVERs.
* Cleanup scnrxintr.
* Implement scnhiwflow.
* Do not use automatic RTS. This and scnhiflow and some changes to the
interrupt system suggested by Ian fix the scn overrun problem at 57600
baud.
* intr_establish now takes *two* ipls. One at which the handler should run,
and one in which the interrupt should get blocked.
* Make transfersize configurable for input and output. Default the input
transfersize to 128 bytes. That way interrupts won't be disabled for more
then about 128us-256us for slow targets. This is necessary to prevent scn
fifo overruns. Cleanup the pdma code. Thank's to Ian Dall for these
changes.
* Make it work on 30mhz machines.
* Configure MSDOSFS, CD9660, KERNFS, NFSCLIENT and INET.
* Configure SCSI-cds, slip and ppp.
* Update for mi ramdisk driver.
* Initialize iv_level for all interrupts.
* Protect the call to the sir-handler with splraise.
* intr_establish now takes *two* ipls. One at which the handler should run,
and one in which the interrupt should get blocked.
* Compute iv_mask for all interrupts in intr_establish.
__builtin_classify_type() into harmless values, so that lint doesn't
get confused, think they're real functions, and that they're being
invoked in the wrong ways.
- Always allow RAW_PART to be opened, regardless of the partition table.
- Never do partition translation on RAW_PART; it's always offset 0.
- Always make sure the disklabel is read from RAW_PART.
- Make *strategy() return values consistent.
This fixes a condition where a bogus partition table could be written
to the disk from SYS_INST, and the user had no way to rewrite with
a correct partition table, since RAW_PART would be invalid.
input operands. This corrects an uninitialized variable warning, and
may also explain some erratic behavior of the MRG ADB; gcc could throw
away the value of the `ticks' variable (but I haven't traced through
any ROMs, myself).
Do this in both machdep.c:setregs() and trap.c:(end of syscall)
for now. Need more analysis to see what is the best way...
Fixes PR#3034 (Thanks very much to Ian Dall for the fix!)
configuration. This way, the delay loop is calibrated before graphics and
serial hardware is touched.
This change should smooth pr 2890 by Thorsten Frueauf (also privately
reported by Laurent Badoukh). While the real problem with those is the
paranoically high delay() calls in the grf_cl initialization, it was made
even more visible by the miscalibrated (to the save side) new style delay
loop.
even if you "really didn't change anything dangerous" :-)
- While we're here, save a few bytes and clock cycles during kernel startup:
cinva ic clears the branch cache on the 68060, no need to do it explicitly.
We're about 75% there. SCSI and HP-IB are not yet supported in a new
config kernel; some autoconfiguration hackery has to be done there, yet.
These changes are enough to network boot a diskless kernel.
New config glue is enabled with the "NEWCONFIG" kernel option. If that
option is not present, an old config kernel will be built. Any kernel
configured with config(8) will automatically pick up the NEWCONFIG
option from std.hp300.
for branch prediction errors (could be used to detect strange binaries),
integer instruction, FP instruction, FP data type and FP effective address
emulations. The latter can be used to diagnose binaries which should be
recompiled with -m68060.
XXX Maybe these diagnostics should be switchable by sysctl or
XXX options DIAGNOSTIC.
