0db8e55935
DMA state was not getting saved if dmaCurPhase was data-out. If the
...
message-in was a save data pointer, the driver would loop in the
interrupt routine.
1997-05-22 03:26:16 +00:00
920471eeec
define GID_MAX (max value permitted in gid_t) and UID_MAX (ditto for uid_t)
...
to 2^32-2
1997-05-22 03:02:50 +00:00
d4af46184c
Deal with another m68k misalignment, this time by changing a
...
short to an int (the first, "pr_type" member). The changed
member was always compared with int values anyway...
1997-05-21 20:09:24 +00:00
5e15995438
Moved db_kill_proc() and db_show_all_procs() to ddb/db_xxx.c
1997-05-21 19:56:50 +00:00
55f621803a
Moved db_show_callout() to ddb/db_xxx.c
1997-05-21 19:55:45 +00:00
e17505a9ea
Add ddb/db_xxx.c
1997-05-21 19:54:54 +00:00
25bdbcc1dc
Move some DDB stuff here from kern_clock.c and kern_proc.c
1997-05-21 19:54:00 +00:00
d212e8744e
Include "rasterconsole.h" to get definition of NRASTERCONSOLE (rcons flag).
...
Don't try rcons on 3100s with keyboards if rcons isn't configured,
1997-05-21 19:41:08 +00:00
8253e6e107
Comment for susword was from fusword and hadn't been changed.
1997-05-21 03:51:04 +00:00
6065389b17
Sync with src/lib/libz
1997-05-20 14:41:54 +00:00
91830a9500
When a background process attempts to TIOCDRAIN (a.k.a. tcdrain()), send
...
its process group a SIGTTOU signal.
1997-05-20 13:11:33 +00:00
1fd29f4172
Make the audio default parameters into a globally accessible constant.
1997-05-20 12:51:43 +00:00
b088f1b7fd
Change default le entry from "le*" to "le0" so GENERIC kernels
...
configure the pmin/pmax (2100/3100) baseboard ethernet as le0, not le1.
1997-05-20 08:36:42 +00:00
0304ff6aed
Implement code to dynamically size the number of page tables based on available
...
RAM at boot.
Also did some cleanup of unused functions, updated several comments, and
removed unecessary 'XXX's.
1997-05-20 06:01:19 +00:00
a777c246ad
Adjust for previous m68k/pcb.h change
1997-05-20 03:25:07 +00:00
1175a38b7f
Use cpu_splXXX() functions to enforce the required ordering of spl()s.
1997-05-19 23:34:40 +00:00
69f811b13c
copyright assigned to TNF
1997-05-19 23:26:32 +00:00
ba2aa6f75a
Add cpu_spl[012345]() definitions to locore. These clear the given
...
interrupt-enable bit in the status register, and all lower bits.
Can be used for spl{bio,net,tty,clock,statclock} on machines where
devices are wried to mips hard-interrupt levels in ascending bit order
so as to match the BSD spl.9 ordering.
1997-05-19 23:25:09 +00:00
0db08d11e6
Redo the SB mixer code. The driver can now distinguish between the
...
four different mixer options: none, CT1335, CT1345, and CT1745.
It should now be possible to access most of the SB16 functionality.
1997-05-19 23:14:29 +00:00
604e6c4091
Add missing initialization.
1997-05-19 23:05:14 +00:00
9784de474e
copyright assigned to TNF
1997-05-19 22:11:12 +00:00
0dae2eb53d
Avoid negative values for `b_dirtyend' and `b_validend'.
1997-05-19 22:08:56 +00:00
f1b84d21b8
Make the install rule nicer.
1997-05-19 21:49:20 +00:00
c53cd4cf48
Add forgotten CLEANFILES. Pointed out by Bernd Ernesti.
1997-05-19 21:34:58 +00:00
0a995f71a2
Fix typo.
1997-05-19 21:24:10 +00:00
3274c536b3
Yet another try to sanitize the bootblock build. Each major target has now
...
its own subdirectory.
Smaller changes involved:
- installboot installs to /usr/mdec
- installboot.8 installs to /usr/share/man/cat8/amiga/
1997-05-19 21:18:58 +00:00
c05eddf7f5
Fix the 'shifting screens' bug on the Falcon. This solution is not perfect
...
since it gives a bit of flicker while switching frame buffers. From
Thomas Gerner.
1997-05-19 21:07:05 +00:00
ae61406a77
Replace bus_tmp() by mapdev() equivalent.
1997-05-19 19:59:36 +00:00
f88bf0a6e9
Replace bus_tmp() with mapdev() equivalent.
1997-05-19 19:56:26 +00:00
d93126b350
Use common m68k/pcb.h; noted by Erik Bertelsen <erik@sockdev.uni-c.dk>,
...
closes PR 3650.
1997-05-19 17:36:45 +00:00
0decef1b80
Fix recording source selection bug.
1997-05-19 17:29:12 +00:00
a0d035c410
Fix some printf format inconsistencies; from SUNAGAWA Keiki
...
<kei_sun@ba2.so-net.or.jp>, fixes PR 3619.
1997-05-19 17:23:09 +00:00
7a45e8a551
Fill in b_dirtyoff/b_dirtyend and b_validoff/b_validend appropriately
...
in each auxiliary buffer; the strategy routines (esp. NFS's) like that.
1997-05-19 14:41:54 +00:00
153ccc307b
Use PHOLD() and PRELE(), rather than manipulating p_holdcnt directly.
1997-05-19 10:43:28 +00:00
a078a4be55
Fix lossage from the latest vm_pmap changes.
1997-05-19 10:14:47 +00:00
ac74fdbb9c
KNF.
1997-05-19 04:01:16 +00:00
f1b8a3c357
Make sure intrtype[] is set. (Curious where this got lost...)
1997-05-19 01:13:01 +00:00
14078d838d
Remove comment about bus dma tag. I've been convinced otherwise.
1997-05-18 23:14:03 +00:00
350c3993aa
Remove bus_tmp().
1997-05-18 21:26:40 +00:00
c0036ae48d
Remove bus_tmp(); it's just a special case of mapdev().
1997-05-18 21:26:22 +00:00
2509589972
Add posix_rename() syscall: regen.
1997-05-18 20:07:27 +00:00
d3aadd8976
Add posix_rename() syscall.
1997-05-18 19:56:48 +00:00
dc9c65530d
Define a `vme' device on `iommu' and allow `vmes' and `vmel' as sub-busses.
1997-05-18 19:41:02 +00:00
18a4aeea23
A bit of framework for sun4m VME busses.
1997-05-18 19:37:37 +00:00
8e9925b45b
Eliminate vm_pmap.
1997-05-18 17:26:30 +00:00
a1c6b08386
When reading from an empty FIFO no process has opened for writing, and
...
O_NONBLOCK is set, return 0.
1997-05-18 12:19:29 +00:00
ad19544997
Remove bogus .PATHs.
1997-05-18 12:14:55 +00:00
50a39a3334
Add NetBSD RCS IDs.
1997-05-18 06:08:02 +00:00
5e447974cb
Add a comment about why the bus dma tag is not provided to the child
...
bus attaching to the bridge.
1997-05-18 05:30:34 +00:00
2b8a15aed4
Add a comment about why the bus dma tag is not forwarded from parent
...
to child if an auxillary PCI bus is attached to the bridge. Also,
remove an extra ';'.
1997-05-18 05:29:24 +00:00
ac99526674
Add defines for increasing SPL levels, assuming devices are wired up
...
in to CPU interrupt pins in order of increasing priority.
1997-05-18 03:19:41 +00:00
8d6f509439
Mask the level registers as the documentation suggests.
1997-05-18 00:36:03 +00:00
d7a82223f4
Change lowater calculation a little.
...
Fix mixer setting bug and add some missing splaudio().
Set SB drq16 to 5 and don't pretend to be SB v1.0.
1997-05-17 23:26:33 +00:00
cf463415ec
Update to ppp-2.3b5
1997-05-17 21:11:59 +00:00
d3844873e8
Mods for ESP406/FAS408 ISA SCSI driver (from Eric S. Hvozda; PR#3581)
1997-05-17 20:58:47 +00:00
7f4962f3f3
An ESP406/FAS408 ISA SCSI adapter driver (from Eric S. Hvozda; PR#3581)
1997-05-17 20:58:12 +00:00
990857fe21
Mods for ESP406/FAS408 SCSI driver (from Eric S. Hvozda; PR#3581)
1997-05-17 20:56:55 +00:00
80bb266e0e
NULL => 0 (Arne Juul; PR#3629)
1997-05-17 20:31:15 +00:00
0914945bfe
Keep a shadow copy of the aux register's contents.
1997-05-17 17:52:50 +00:00
dc056a2dfd
Undo previous change.
1997-05-17 16:13:24 +00:00
1574dad87a
* Missed that one during last commit.
1997-05-17 14:06:26 +00:00
eed1dad537
* Reorganize pc532/stand similar to the alpha and hp300 ports (by stealing
...
Makefiles and scripts from hp300/alpha).
1997-05-17 13:55:34 +00:00
92c113aebb
Fix printf format botch.
1997-05-17 00:19:02 +00:00
09da7e273e
Eliminate vmspace.vm_pmap and all references to it unless
...
__VM_PMAP_HACK is defined (for temporary compatibility).
The __VM_PMAP_HACK code should be removed after all the
ports that define it have removed all vm_pmap references.
1997-05-16 21:39:50 +00:00
e2a58b69f7
Add #define __VM_PMAP_HACK as a temporary measure.
1997-05-16 21:35:30 +00:00
abdd4ddbea
Back to pretending to be a SB v1.0 again, the mixer code for higher
...
versions is buggy.
1997-05-16 07:07:22 +00:00
f7e146ad7f
Return EIO instead of EFAULT when read/write is too big or small.
1997-05-16 05:47:14 +00:00
70d1c8b8c8
Return EIO instead of EFAULT when read/write is too big or small.
1997-05-16 05:33:48 +00:00
7ae81c002a
Actually use the passed physical address in viking_cache_flush(). Also,
...
use hardcoded cache parameters for now.
1997-05-15 22:53:01 +00:00
72d640a497
Tweak gain curve (from nsayer@kfu.com; PR#2909)
1997-05-15 22:32:56 +00:00
3f1da95bc5
Nuke old `mmu3l' references.
1997-05-15 22:25:45 +00:00
05de3b9034
Multicast definitions, forgotten in previous checkins.
1997-05-15 20:10:23 +00:00
4f48bf2bb1
Change some malloc -> MALLOC and free -> FREE
...
More accuracy in diag/panic messages (part of PR3602; Eric Fair).
1997-05-15 19:19:49 +00:00
9854f9917e
Print some more info on unresolved user traps, mostly for DIAGNOSTIC.
1997-05-15 18:33:47 +00:00
e005d20961
Allow MAXPHYS to be specified as a config file option.
1997-05-15 17:27:15 +00:00
9827bd6dc6
When fstat(2)ing a file descriptor of a local communications domain socket,
...
fill the socket's creation time into the stat structure's st_[acm]time fields:
POSIX requires this behavior for pipe(2). N.B.: updating the st_[am]time fields
when reading/writing the pipe is neither required nor implemented, though.
1997-05-15 17:01:04 +00:00
dcf4d707a4
Only compile in rcons tests if rcons pseudo-device was declared
1997-05-15 16:43:36 +00:00
94815a35ee
Sync with libc
1997-05-15 16:20:54 +00:00
e199d62111
Add hooks for definiing kernel RCSId and copyright symbols,
...
via asm(".section"), for compatibility with Alpha tc and ioasic drivers.
Assumes ELF and binutils-2.8 toolchain.
1997-05-15 08:47:05 +00:00
d3c5a81e19
Don't do rcons-specific things if no rcons pseudo-device was declared. Clean up probe-time printfs.
1997-05-15 07:24:37 +00:00
d592c85696
The pmax interrupt handlers were re-enabling clock interrupts ASAP after
...
hardclock() is called. Now, only do so if clock intrs were enabled beforehand.
1997-05-15 05:03:42 +00:00
13f3645083
Merge in changes from Alpha scc driver with RCS log message:
...
> revision 1.33
> date: 1997/05/15 02:15:55; author: thorpej; state: Exp; lines: +8 -4
> - In sccmatch(), check any user-specified offset, allowing scc unit numbers
> to be nailed down. From Ken Hornstein <kenh@cmf.nrl.navy.mil>, PR #3626 ,
> slightly modified to allow wildcarded offsets.
> - Blow away the cf->cf_unit check in sccmatch(); it's bogus.
Also gc usused references to NSCC and #include "scc.h"
1997-05-15 04:49:32 +00:00
a72c2263f5
Change `needs-count' on scc to `needs-flag': should have been `needs-flag'
...
since rev 1.18 of pmax/tc/scc.c.
1997-05-15 04:42:12 +00:00
2494f148f4
- In sccmatch(), check any user-specified offset, allowing scc unit numbers
...
to be nailed down. From Ken Hornstein <kenh@cmf.nrl.navy.mil>, PR #3626 ,
slightly modified to allow wildcarded offsets.
- Blow away the cf->cf_unit check in sccmatch(); it's bogus.
1997-05-15 02:15:55 +00:00
608a6800e6
Things are stable enough that DDB, PMAP_DEBUG and DIAGNOSTIC aren't needed
...
anymore.
1997-05-15 01:49:27 +00:00
3480029167
Add `offset' locator to ioasic-attached devices, for compatibility with
...
the ioasic_submatch() used in drivers shared by pmax and alpha ports.
1997-05-15 00:43:22 +00:00
2aba644f04
Fix a cut&paste (?) mistake. pr#3622
1997-05-14 19:00:17 +00:00
cc8306e0d2
Remove a : which is too much. fix pr#3621
1997-05-14 18:12:10 +00:00
a83cf310c1
The Hydra is 20 MHz and the Pegasus is 33 MHz.
1997-05-14 16:45:22 +00:00
5079510304
Make the "hydra" call leds_hydra() from clock_attach().
1997-05-14 16:42:45 +00:00
e6fa5bc33d
Add leds_hydra().
1997-05-14 16:37:01 +00:00
b209530013
Remove call to leds_init (it is already in obio_init).
1997-05-14 16:13:31 +00:00
3a8dda73c5
Add missing prototypes to sa_handler and sv_handler. Note: the sv_handler
...
prototype is historically incorrect, but we don't provide the interface
in the kernel, so why lie about it?
1997-05-14 16:12:15 +00:00
2dc79e5c4b
Link this program statically.
1997-05-14 07:57:13 +00:00
ebb856e274
Long awaited MI/MD separation completed.
1997-05-14 01:37:23 +00:00
151926da32
Make sure we're in register window 0 before attempting EEPROM access,
...
pointed out by Matthias Drochner.
1997-05-14 00:22:00 +00:00
fb2e379487
add pci* at pchb?
1997-05-13 22:48:33 +00:00
548e1683bf
add pcibus attribute to pchb, for Intel dual-bus host/PCI bridge chip
1997-05-13 22:48:02 +00:00
86bf57701c
add support for dual PCI bus Intel host/PCI bridge. Thanks to Chris Demetriou for his assistance in educating me about the vagaries of PCI and its configuration model.
1997-05-13 22:47:30 +00:00
3dd3428361
In user mode code, define PS_STRINGS as __ps_strings (from crt0).
1997-05-13 21:37:06 +00:00
f99d42b623
Sync with libc.
1997-05-13 19:32:01 +00:00
37be371415
Clean up emulation code, SB, and GUS drivers and add some more encoding
...
emulation to SB.
1997-05-13 19:02:11 +00:00
a8af683eb9
Eliminate references to vmspace.vm_pmap
1997-05-13 18:00:49 +00:00
1aa91b893d
Eliminate references to vmspace.vm_pmap
...
(also fix some comments).
1997-05-13 17:17:12 +00:00
d69bf3ded2
Eliminate references to vmspace.vm_pmap
...
(also fix some typos in comments).
1997-05-13 17:16:28 +00:00
1d8ffff9d9
Use GLOBAL(), _C_LABEL(), etc.
1997-05-13 16:31:26 +00:00
d01ff6bdaa
regen
1997-05-13 14:45:39 +00:00
68187ebd40
correct the identification of Intel Orion PCIset chips
1997-05-13 14:44:54 +00:00
fac0bcfedb
Update a recently-added comment re: bytelanes values.
1997-05-13 13:22:56 +00:00
5b80f9077f
Tweak sbc_drq_intr() (interrupt-driven PDMA interrupt handler); it
...
now works properly on at least some disks. Further testing is
necessary.
1997-05-13 06:34:00 +00:00
f9d1ae2243
clear B_AGE for non-flush writes, buffers seem to be reused
...
too quickly, disturbing NFS performance (XXXX needs further analysis
and a _real_ fix)
1997-05-12 23:42:11 +00:00
fe28924160
* If nfs_reconnect fails, be sure to release the sndlock, otherwise no
...
other requests will get through and the mount point will be effectively dead.
This could happen for mounts using TCP and -i and/or -s.
* Reserve enough space for UDP sockets. Fixes PR 3008, from Naofumi Honda.
1997-05-12 23:40:22 +00:00
7b65591cb9
In nfsrvw_coalesce, make sure the coalesce list from the nfsd is moved
...
as well. This fixes client hangs. (from Naofumi Honda
<honda@Kururu.math.sci.hokudai.ac.jp> / NetBSD-pc98)
1997-05-12 23:37:12 +00:00
e98c5a9b1c
Fix two boundary/overflow errors in extent_alloc_subregion():
...
(1): "substart == ex->ex_end" and "subend == ex->ex_start"
are completely legal parameters for extent_alloc_subregion()
(2): "(subend - substart) + 1" can cause an overflow if the whole
numeric range is covered by the extent.
Submitted by Matthias Drochner <drochner@zelz26.zel.kfa-juelich.de>
in PR #3119 .
1997-05-12 23:36:32 +00:00
ae69375a24
Store RPC procnum consistently as an u_int32_t. This is as it should be,
...
and avoid possible server crashes due to bogus comparisons. Partly
from BSDI.
1997-05-12 23:36:04 +00:00
3b7a1d3ab0
Convert several interrupt handlers to bus space model, removing some
...
XXX's. Also, fix a bug in grfmv_intr_generic() that I found and
confirmed with Allen.
1997-05-12 20:35:50 +00:00
9c03d5cf55
When doing a CREATE, RENAME or DELETE w/ DOWHITEOUT and ISWHITEOUT lookup on a
...
non-existent file and the end of the pathname is reached, and this `current'
directory resides on a read-only mounted file system, don't update/prepare
its inode for the actual operation but return EROFS.
1997-05-12 19:04:16 +00:00
4d989c06dd
Add the following drivers:
...
- frodo at intio
- dnkbd at frodo (commented out until integrated)
- apci at frodo
1997-05-12 08:24:56 +00:00
f8337a2c14
Add apci driver glue.
1997-05-12 08:23:28 +00:00
286b3b171d
Add glue for APCI driver at cdev minor #31 and in console switch.
1997-05-12 08:17:53 +00:00
6cc1022d84
Garbage-collect an unneeded definition.
1997-05-12 08:14:01 +00:00
a492e1df80
Add a kernel driver for the APCI 8250-like UARTs that live in the
...
Frodo ASIC, originally contributed by Mike Smith
<mike@pressed.spam.frisbee.net.au>, but reworked by me to:
- Essentially duplicate the dca driver, modifiying where necessary
to work with the APCI.
- Deal with the different Frodo autoconfiguration model.
- Don't attach a tty to the 0th UART - it's not really useful for much
more than the Domain keyboard.
- Added a routine to check for the existence of a DCA at select code 9.
On most models, the 1'th UART is mapped to select code 9 by the PROM,
and on these models, we do _NOT_ want to attach the device as an APCI.
However, on the 425e, this mapping does not take place, so we attach
as an APCI. The 2'th and 3'th UARTs always get tty instances.
- Add console support which will only be invoked on the 425e (i.e. check
for DCA at 9, and defer console to it if it exists).
1997-05-12 08:12:36 +00:00
a155715d44
Add a driver for the Apollo Utility Chip (a.k.a. "frodo"), contributed
...
by Mike Smith <mike@pressed.spam.frisbee.net.au>, with some changes to
the autoconfiguration model and slight changes to the interrupt glue
by me.
1997-05-12 08:03:48 +00:00
2392fb2a1c
Bump version: Added APCI console support
1997-05-12 07:58:08 +00:00
83c63bd2de
- Always build a romout() stub.
...
- If kbdnmi() returns, stop cold, since it shouldn't.
1997-05-12 07:56:00 +00:00
f39885279b
- Define INTIOBASE here for use by the standalone programs.
...
- Add some extern's for "userom" and romputchar()
1997-05-12 07:54:45 +00:00
61322b7b85
KNF and other cosmetics.
1997-05-12 07:53:58 +00:00
bfc4c6c42d
Whoops; here's the rest of the Deferred Task Manager changes.
1997-05-12 07:53:04 +00:00
4e0ee78444
- Always build the romputchar() glue.
...
- Don't set "userom" in the trap handler (we didn't before, but we've
removed the previous CPP conditional that was used to enable it.)
1997-05-12 07:53:02 +00:00
eac0352a9e
In kbdnmi(), after we have cleared the interrupt condition, reset
...
the machine, rather than simply returning to the assembly NMI handler.
Previously, the assembly handler would simply jump back to begin:, which
would frob the stack, and re-clear the BSS. However, this is not sufficient,
as there may be state in initialized data that must be restored. Thus,
the only reasonable solution is to re-load the boot block.
1997-05-12 07:51:32 +00:00
c25bfe1365
Don't use hardcoded hex for the address of the internal HP-IB interface.
...
Instead, use definitions from <hp300/dev/dioreg.h>
1997-05-12 07:48:23 +00:00
82ae3a106e
Don't use a hard-coded hex address for the 0'th APCI port; use definitions
...
from <hp300/dev/frodoreg.h>
1997-05-12 07:47:03 +00:00
0c5b002449
Add prototypes for standalone APCI driver.
1997-05-12 07:45:41 +00:00
05333d3fa5
- Add glue for standalone APCI console driver.
...
- Make the romputchar() useage conditional only on "userom".
1997-05-12 07:44:53 +00:00
225fbfa100
Build the standalone APCI driver.
1997-05-12 07:43:18 +00:00
bbbc6052c1
Add a standalone APCI driver, adapted from the standalone DCA driver
...
by me. This driver should only be invoked when there are no other
suitable console devices present in the system. This situation currently
exists on the 425e, for which we do not have a frame buffer driver,
and who's PROM does not map the second APCI UART to select code 9,
like is done on the 4{00,25,33}{t,s}.
1997-05-12 07:41:55 +00:00
5842491f1c
Add en implementation of the Deferred Task Manager, contributed by Paul
...
Goyette <paul@pgoyette.bdt.com>.
1997-05-12 07:29:29 +00:00
877dcf7fc9
restore accidentally-lost set of nchannels in driver layer
1997-05-12 04:11:43 +00:00
ee80f1200e
Implement new NuBus slot space mapping/probing code, utilizing bus.h (and
...
our MD bus_space_probe() extension). This has several side effects:
- NuBus drivers must map and unmap slot space, rather than relying
on this happening before they are attached.
- Functions exported to NuBus drivers from nubus.c now need to be
supplied with a bus space tag/handle pair.
- Old bus map/peek functions can be garbage collected, as can pmap
support for the same.
Because of some current limitations of the bus space specification, we
are violating the abstraction in grf_mv (NuBus grf driver). All such
violations are clearly marked /* XXX */, and must be addressed when
the specification is updated.
1997-05-11 19:11:27 +00:00
1c454cc472
Diagnostic LED on 3/80 appears to be active-high, not active-low as previously
...
thought. It remains to be seen if this is true for the 3/470.
1997-05-11 06:16:26 +00:00
3d8d0c485c
Add call to leds_init() after everything has started up ok.
1997-05-11 06:15:09 +00:00
fac2cd30a0
Set TX-available threshhold in epinit() just before enabling interrupts,
...
so TX_AVAIL intrs are enabled for root-on-NFS kernels.
Tested (and required) on 3c595TX with root-on-NFS kernel booted from floppy.
1997-05-11 05:47:08 +00:00
3d6483ab9a
Ignore use of sunos_audioio.monitor_gain because it has no equivalent in the
...
audio sub-system. It used to use the ``__spare'' member of the audio_info
struct, but that has been removed.
1997-05-11 05:41:13 +00:00
4b487c00bd
Clean up audio_silence_copyout().
1997-05-11 00:41:12 +00:00
ef37270ec6
Install header files from miscfs.
1997-05-10 22:09:46 +00:00
420dea1e9a
Move `struct kern_target' definition into kernfs.h
1997-05-10 22:04:13 +00:00
c7be49441e
fix typo: LINEAR should have been ULINEAR
1997-05-10 19:01:53 +00:00
9734adc67f
use normal linear names/values for 8-bit encodings
...
mark mulaw as emulated (it's done via a mapping table)
use GUS query encoding routine, even on GUS max, since the encoding
stuff is handled by the GF1.
XXX might not be right for recording, but it's correct for playback.
1997-05-10 18:58:33 +00:00
8e6617f5d8
Implement method to store release information in one location; it's
...
generated by `osrelease.sh`. If an argument of "-s" is given, print
the "short" form (e.g, "12E"), otherwise print the long (e.g, "1.2E").
Take advantage of this in newvers.sh.
1997-05-10 15:40:09 +00:00
f99df8aa9c
rdsetimage -> mdsetimage in comment (enami tsugutomo, PR 3596)
1997-05-10 11:06:53 +00:00
9e785c6d3f
* Define proc0paddr here and not in locore.s.
1997-05-10 09:29:26 +00:00
e63a553175
Change the interface between high and lowlevel audio drivers again:
...
Set the encoding parameters slightly differently.
Remove the SW encoding/decodinf functions from this interface
and move them to the audio_parameter struct; this is both more efficient
and flexible.
1997-05-09 22:16:27 +00:00
cc4a1553a1
Eliminate bogus redefinitions of standard targets.
1997-05-09 07:50:03 +00:00
3be66b88fe
Update for lookup() changes.
1997-05-09 04:05:01 +00:00
e7b98401d4
Pull in the declarations of db_expression() and db_error(), used by
...
db_kill_proc().
1997-05-08 17:22:05 +00:00
76ee747754
Need stat.h.
1997-05-08 17:17:29 +00:00
8e39ee9dad
Don't use vaccess() here.
1997-05-08 17:16:15 +00:00
ae5d73b594
Update for vaccess() change.
1997-05-08 17:08:31 +00:00
f14deb8a73
Need stat.h.
1997-05-08 16:53:06 +00:00
5bd3538a41
Fix typo.
1997-05-08 16:43:16 +00:00
6fd182057f
cleanup use of whitespace
1997-05-08 16:39:35 +00:00
06fb68217b
Oops; fix reversed test for VDIR.
1997-05-08 16:34:54 +00:00
e3f99a9397
Pass the vnode type to vaccess(), and use it when checking VEXEC. Make sure
...
that the mode bits passed to vaccess() and returned by foo_getattr() contain
only permission bits.
1997-05-08 16:19:43 +00:00
07ba5e5ac3
Snapshot of namei() cleanup:
...
1) Eliminate all of the null component name special cases; handle runs of
slashes and leading and trailing slashes completely differently.
2) Return ENOENT when doing a lookup through an empty symlink.
3) Enforce that we're doing a lookup through a directory in in chdir() and
lookup() rather than in foo_lookup().
Not yet finished.
1997-05-08 14:55:22 +00:00
5482ee2d93
Fixed copyin() argument botch in shmctl() IPC_STAT handling.
1997-05-08 14:33:11 +00:00
5c6f7fca32
* Update asm.h to be more like the other port's asm.h.
...
* Update locore.s to use all the macros defined asm.h
* Update random.s to use the much nicer algorithm from the m68k port.
1997-05-08 13:44:11 +00:00
4d2eb6bb39
GC some code.
1997-05-08 12:17:47 +00:00
0ecc9cdac1
Update to 1.2E.
1997-05-08 11:40:16 +00:00
837a72363d
VEXEC -> VLOOKUP, as appropriate.
1997-05-08 10:57:17 +00:00
8f5978a181
GC VS[UG]ID and VSVTX, and add a new VLOOKUP, since the semantics are now
...
different from VEXEC.
1997-05-08 10:21:35 +00:00
d7f33c5e60
va_mode contains stat bits. Use S_IS[UG]ID rather than VS[UG]ID.
1997-05-08 10:19:10 +00:00
fd9b64b81a
Garbage-collect an unneeded #ifdef.
1997-05-08 04:39:35 +00:00
158a6e52a4
Garbage-collect and uneeded #ifdef.
1997-05-08 04:39:03 +00:00
94e0a9b88d
Update to current configurations.
1997-05-08 04:09:27 +00:00
47aae56862
Sync w/ SPARC port, from Paul Krannenburg <pk@netbsd.org>:
...
Remove esp FLUSH when residual bytes are present in FIFO, the ncr53c9x
driver will flush when necessary. Doing the FLUSH here interferes
with DMA-enabled target selection.
1997-05-08 01:33:49 +00:00
07cf0ea21d
Oops, forgot this in previous commit.
1997-05-07 20:23:53 +00:00
c397fa8357
Return audio buffer size in audio_info_t with ioctl() AUDIO_GETINFO.
...
Use the buffer size to implement one more OSS ioctl().
1997-05-07 19:24:25 +00:00
84e0c3eb4b
Add a "kill" command that calls db_kill_proc().
1997-05-07 18:51:58 +00:00
c4a52794f1
Convert to new orthogonal audio encoding scheme and implement
...
some of the new encodings. The change to ioctl AUDIO_GETENC is
NOT backwards compatible.
1997-05-07 18:51:31 +00:00
8ae8b46853
Add db_kill_proc().
1997-05-07 18:50:50 +00:00
9fa3dabef7
Moved db_show_all_procs() to kern_proc.c
1997-05-07 18:49:10 +00:00
48c524e63a
Add db_kill_proc() for DDB (and move db_show_all_procs here so
...
all the "proc" debugging stuff is here in one place).
1997-05-07 18:48:15 +00:00
b5c783c6e4
Merge 970327 "de" update.
1997-05-07 18:45:01 +00:00
84bca5d679
Don't use _SUBDIRUSE outside of bsd.subdir.mk.
1997-05-07 17:28:47 +00:00
53fb29bd67
We don't need a special clean: target here.
1997-05-07 17:16:05 +00:00
11fc3c2a7a
In case someone doesn't compile in DEBUG we need to still
...
snag the msgbuf. Also, observe protocols about message buffer
being 'mapped'.
1997-05-07 17:13:32 +00:00
185b24dd5b
Use libinstall::, not install:, to prevent instaling LIB.
1997-05-07 16:20:26 +00:00
5432d44374
Override the proginstall target to do our special hackery. (Yuck.)
1997-05-07 16:15:01 +00:00
29ed66d6d3
Minor change.
1997-05-07 16:13:46 +00:00
f778381424
Clean up weirdness.
1997-05-07 16:13:13 +00:00
6e0450c70f
Use proginstall:: to disable installing PROG.
1997-05-07 15:59:08 +00:00
85903d50e2
Add some missing .PHONYs.
1997-05-07 13:33:59 +00:00
ba4cf66fbe
Add a missing .PHONY.
1997-05-07 08:26:04 +00:00
fd8daf980e
Add .MAKE to the .OBJDIR hacks, so they work with `make -n'.
1997-05-07 07:15:34 +00:00
5f50ab9716
fix bogons; from Jonathan O'Brien in PR kern/3571.
1997-05-07 04:47:15 +00:00
383d8e6f79
update sb_printsc() to match current reality.
1997-05-07 04:36:00 +00:00
6fe4889b92
cleanup use of whitespace
1997-05-07 02:20:26 +00:00
a9016579ab
clean up whitespace use
1997-05-07 02:14:59 +00:00
8744fe853c
clean up use of whitespace
1997-05-07 01:55:23 +00:00
c4eb220ea5
minor whitespaco fixes
1997-05-07 00:32:44 +00:00
mhitch