thorpej
2eaa922149
Do not print "esp0: !TC [intr ...]" messages if:
...
(a) The interrupt is a RESEL interrupt, and
(b) our state is SELECTING.
This condition can occur in perfectly normal operation if we are using
DMA to select the target and we are interrupted by another target
reselecting us. Per discussion with Paul Krannenburg.
1997-06-26 00:27:25 +00:00
hannken
5d4f988920
Adjust the number of ccbs allocated during initialization.
...
Every ccb locks 64k of memory for dma buffers.
Instead of AHA_CCB_MAX ccbs using 1MByte only sc_link.openings ccbs
per device are allocated. Thus we now use only 128KByte per device present.
1997-06-25 13:30:59 +00:00
thorpej
ca84057878
Correct Intel Triton MX PCI IDs, from Tom Yu <tlyu@mit.edu>, PR #3478 .
1997-06-24 06:20:24 +00:00
kml
0953486d37
Added definitions for Essential Communications RoadRunner HIPPI and
...
Gigabit Ethernet interfaces.
1997-06-24 05:04:10 +00:00
thorpej
84166e5151
foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
...
from the disklabel accordingly.
1997-06-24 00:28:36 +00:00
thorpej
a9710d488d
Three changes to ofdsize():
...
- If the partition is already open, skip the open/close step. (Sync
with other disk drivers.)
- foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
from the disklabel accordingly.
- Pass correct arguments to ofdopen() and ofdclose().
1997-06-24 00:27:18 +00:00
thorpej
efde490942
foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
...
from the disklabel accordingly.
1997-06-24 00:20:44 +00:00
thorpej
e06bb29b00
Two changes to ccdsize():
...
- If the partition was previously open, don't do the open/close steps.
(Sync with other disk drivers.)
- foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
from the disklabel accordingly.
1997-06-23 23:59:53 +00:00
thorpej
5029dd336b
Add full disklabel and partition support to the vnd driver, allowing much
...
greater flexibility in its use. Additionally, add support for "geometry
emulation". This allows the "geometry" of the "disk" to be specified
at config time, providing near-perfect emulation of disklabel-less floppies,
CD-ROMs, etc., including non-512-byte sectors. If a geometry is not
specified at config time, a default based on 1M cylinders will be used.
1997-06-23 21:03:55 +00:00
cjs
d152627095
Make this work again; the code to avoid attaching a 3c509 in P&P mode
...
didn't map in the port properly, and it was only luck that it worked
on anything at all.
1997-06-23 05:25:40 +00:00
mjacob
68d184dc19
Hmm- seriously funny and sad bug: you need to directly establish the
...
clock rate for this board on Alpha/PCI systems. Under x86/PCI, the
board f/w will correctly tell you "I'm running at 60Mhz", so the code
that preserved that across a board reset (which would drop the chip
back to 40Mhz) worked fine. On the 8200, the chip was saying "I'm 40Mhz"-
which wasn't true. This turned out to be okay as long as you didn't have
any FAST or UltraFast targets- In fact, setting the chip to 40Mhz allowed
you to run up to 8Mhz SCSI. Unfortunately you die bigtime on the devices
that go faster than that. The fix here is to only use what the chip tells
you the clock rate is in the cases you don't really know (sbus is the
only case where this could be different, although with 66Mhz PCI coming up,
this may change).
1997-06-22 19:57:06 +00:00
jonathan
046c2a56df
Clone Alpha ``cpu-independent'' clock API headers into sys/dev/tc/,
...
to share them with pmax.
1997-06-22 08:02:18 +00:00
jonathan
1f44934407
* Change Sprite MACH_xxx prefix to MIPS_xxx.
...
* Use standard mips terminology (xxx_KSEG0, xxx_KSEG1) instead of the
(more meaningful) Sprite names (xxx_CACHED, xxx_UNCACHED).
1997-06-22 07:42:25 +00:00
mhitch
70590de547
Changes for merged mips1/mips3.
...
Replace MachHitFlushDCache with mips3_HitFlushDCache.
1997-06-21 04:06:11 +00:00
pk
5d4e140e53
Remove spurious line left over in previous commit.
1997-06-18 22:17:14 +00:00
pk
f5bf0d3701
wdsize(): only call wdopen()/wdclose() if not already open, per the
...
current `openmask'.
1997-06-18 20:39:55 +00:00
pk
8303adf18a
sdsize(): only call sdopen()/sdclose() if not already open, per the
...
current openmask.
1997-06-18 20:38:59 +00:00
mikel
379f3b1c05
add device ID for SB AWE64 Value; from William Coldwell in PR kern/3716.
...
also add comments for some device IDs describing what they match.
1997-06-18 07:19:08 +00:00
cgd
22da43e670
Change expected mapping register type argument for the pci_mapreg_map()
...
call for the board's memory space to be PCI_MAPREG_MEM_TYPE_32BIT_1M or
PCI_MAPREG_MEM_TYPE_32BIT depending on the board ID. Also, remove a
bogus extra argument to an interrupt-establishment-error printf. Problems
pointed out by Jarkko Torppa <torppa@cute.fi> in PR 3753, but fixed slightly
differently than he suggested.
1997-06-17 05:44:22 +00:00
cgd
57f46a9e4a
fix several bugs pointed out by Jarkko Torppa <torppa@cute.fi> in PR 3753:
...
(1) fix a printf format (%x to print int, not %lx).
(2) fix probe of 4th chip/16th channel (used to tell whether or not the
board is a 16- or 32-port board) by removing an incorrect offset so
that the code matched its comments. (!!!)
(3) fix storage of chip number in per-channel structure so that it actually
stores the chip number, rather than the chip offset. This allows the
driver to work with more than the first four channels (i.e. with chips
other than chip number 0, which happens to have an offset of zero). (!!!)
1997-06-17 05:38:10 +00:00
cgd
6b78891053
the port number is the low 5 bits of the minor. That means that it should
...
be masked with 0x1f (the low 5 bits), rather than 0x0f (the low four bits).
Pointed out by Jarkko Torppa <torppa@cute.fi> in PR 3753.
1997-06-17 05:32:46 +00:00
jonathan
0bca2bff6d
include <machine/bus.h>.
1997-06-16 03:46:29 +00:00
mhitch
ef2beab3d7
More merged MIPS1/MIPS3 support.
1997-06-15 18:24:05 +00:00
mhitch
0bf6ea4387
DECstation MIPS3 support: wbflush() is cpu-dependent, need declaration from
...
machine/locore.h.
1997-06-15 18:23:02 +00:00
mycroft
09cad93ce8
Implement a better backpressure mechanism so that data is collected
...
in the driver's buffer if the tty buffer is full. If the driver's buffer
becomes full, turn off receive interrupts until it drains a bit.
1997-06-15 11:18:59 +00:00
thorpej
3cb5726461
RCS ID police.
1997-06-14 22:25:11 +00:00
thorpej
47fab5e3ae
Make this compile again in light of recent changes to cdio.h
1997-06-14 08:55:14 +00:00
augustss
86ad297c12
Fix a braino in record source selection and a pasto in detecting
...
16 bit mode recording.
1997-06-13 19:21:59 +00:00
matthias
8033e010bd
In case of a SCSI-error print the extended sense information and not
...
some sort of random garbage.
1997-06-09 19:36:56 +00:00
thorpej
da1b5f9021
It's perfectly normal for an older (e.g. pre SCSI-2) device to send
...
MESSAGE_REJECT in response to SDTR or WDTR. Because of this, the
printfs that indicate refusal of sync/wide negotiation are unneeded
in normal operation. In the __NetBSD__ case, disable them by default.
They, like the other extra-verbose ahc driver boot messages, may be
reenabled with "options DEBUG". The behavior in the !__NetBSD__ case
is unchanged.
1997-06-09 01:51:03 +00:00
thorpej
e78f8ce7da
Duplicate register mapping logic from Tulip driver.
1997-06-09 01:23:20 +00:00
thorpej
3e023b7681
Fix a slight bogon in merge of this driver; make the device map all of
...
its space, and pick the space used by default based on what is appropriate
for the CPU we're running on.
1997-06-09 00:34:18 +00:00
thorpej
e962c12a08
Fix pasto: sbus -> pci
1997-06-08 22:15:34 +00:00
thorpej
6bf33a7fe3
Merge pdq-970604 update.
1997-06-08 19:47:13 +00:00
thorpej
2f8150954f
Correct a couple of typos so that this compiles with TULIP_DEBUG,
...
per PR 3723, submitted by enami tsugutomo <enami@ba2.so-net.or.jp>.
1997-06-08 18:49:43 +00:00
thorpej
cd4fc920b0
Put back Matt Thomas's revision ID, per PR 3723, submitted by
...
enami tsugutomo <enami@ba2.so-net.or.jp>.
1997-06-08 18:44:02 +00:00
pk
5521477455
Remove attempt to use files with holes; it's prone to deadlocks.
1997-06-08 15:59:41 +00:00
pk
6c88c4ca23
Avoid race for residual count and pending requests count.
1997-06-08 15:55:34 +00:00
thorpej
31498892b3
Fix a (fatal) typo in the bus dma changes. From Bill Coldwell
...
<billc@warped.com>
1997-06-08 08:43:52 +00:00
thorpej
159c685a42
- Update for changes to core ISP driver.
...
- Convert to use bus dma, greatly simplifying DMA setup.
1997-06-08 06:34:52 +00:00
thorpej
b937ee4745
- Simplify mailbox DMA setup, allowing the front-ends to allocate the
...
mailbox storage in a way they see fit.
- Define macros to index and size the request and result queue entries.
1997-06-08 06:31:52 +00:00
mhitch
c108a0ce0b
Fix another weird driver state. After sending the SCSI command to the target
...
after synch negotation during device probes, the 53C94 stops with the target
reqesting more command data. The fifo appears to still contain a couple of
bytes, so transfer them. If the target still wants command data after that,
do a transfer pad. The target seems to function normally after this. A
much better solution thant simply rebooting!
Also fix a problem when compiling with DIAGNOSTIC - a mismatch between using
DIAGNOSTIC and MACH_DIAGNOSTIC caused the compile to fail.
Try to start another target and a device disconnects.
1997-06-07 05:10:42 +00:00
thorpej
6d9b3bc058
Pull the thorpej-bus-dma branch into the mainline.
1997-06-07 01:35:07 +00:00
thorpej
11e78a6b0d
Pull thorpej-bus-dma branch into mainline.
1997-06-06 23:43:45 +00:00
thorpej
fbc0df0a1a
Pull thorpej-bus-dma branch into mainline.
1997-06-06 23:30:02 +00:00
mellon
2a1b799fda
Clean up conflicts during merge (thomas de-970603)
1997-06-06 23:14:58 +00:00
mellon
4f4f344f71
Clean up conflicts during merge (thomas de-970603)
1997-06-06 23:14:19 +00:00
thorpej
b2ef3f1591
Add device declaration for Intel EtherExpress PRO 10/100B driver.
1997-06-05 02:15:36 +00:00
thorpej
f2317e1c5b
Changes to support NetBSD, written by me, tested by Matthias Drochner:
...
- Add NetBSD autoconfiguration support.
- Rearrange code slightly to minimize the number of #ifdefs.
- Don't use a structure to access CSRs. Use macros that DTRT for
the NetBSD and FreeBSD cases.
- Deal with alignment contraint on Alpha - add 2-byte padding at the
beginning of the RFA, so that the data will be 4-byte aligned, after
the 14-byte Ethernet header.
Thanks to Matthias Drochner for the testing, and David Greenman for
the feedback on the changes.
1997-06-05 02:01:55 +00:00
thorpej
7fa6876537
Import FreeBSD's Intel EtherExpress PRO 10/100B driver, written
...
by David Greenman.
1997-06-05 01:50:48 +00:00
cgd
9d52c4bb31
4th arg to bus_space_{read,write}_multi_2() is a u_int16_t *, and should be
...
cast if it isn't. (These casts aren't necessarily safe, because of
alignment issues, but they allow the code to compile with prototyped versions
of bus_space_{read,write}_multi_2().)
1997-06-04 20:42:56 +00:00
mjacob
62b3daa7d2
Finally found the cause of that nagging 'lost command' (for the first
...
command) bug: the initial response queue index is take from mbox 5,
not mbox 4, and mbox 5 wasn't getting initialized to zero.
1997-06-01 23:42:04 +00:00
jtk
5759a768d7
add software emulation stub for ulinear_be
1997-05-31 15:30:22 +00:00
mycroft
9a7f1bfa84
Use single mode, not demand mode, for auto-initialize transfers.
1997-05-29 21:46:07 +00:00
mycroft
cf09974361
Add DMA37MD_DEMAND and DMA37MD_BLOCK.
1997-05-29 21:42:28 +00:00
jtk
8551fb607a
fix popping noises on 16-bit ulinear output.
...
add big-endian support
XXX ULINEAR_BE still needs ad1848 emulation on gusmax
1997-05-29 05:33:15 +00:00
jtk
1b429137ae
make Jazz16 16-bit output work properly again. Still hangs somewhere
...
(not yet diagnosed) on occasion in high-speed mode, but a ^C will exit
immediately--no 30-second drainage timeout.
1997-05-29 04:57:02 +00:00
mycroft
e9028468cd
Don't use the TC bit to check for wraparound in isa_dmacount(); remember the
...
transfer length and use that.
1997-05-28 20:02:39 +00:00
jtc
0a3a33b1ba
Copyright of this file has been assigned to The NetBSD Foundation
1997-05-28 16:30:54 +00:00
augustss
1bd32f9cad
Add Alaw encoding emulation.
1997-05-28 00:07:46 +00:00
augustss
1616170859
A cosmetic name change.
1997-05-27 23:37:53 +00:00
augustss
73ff4bd775
Allow more than one hardware driver to attach to the audio upper layer.
1997-05-27 23:24:56 +00:00
pk
f959841d17
Pass correct offset to vn_rdwr().
1997-05-26 20:28:38 +00:00
mycroft
6756ff7858
Minor corrections to previous. Notably, make recording work on SBPro again.
1997-05-26 16:13:59 +00:00
mycroft
6bfd7b7d45
Remove unneeded call to comstop() in commsrint(). This fixes a problem
...
where the driver would sometimes retransmit bytes.
1997-05-26 14:54:46 +00:00
pk
e571ff8ba8
Add code (#ifdef'ed VND_FILLHOLES for now) to fall back on vn_rdwr()
...
if VOP_BMAP() does not produce a translation.
IO_SYNC is used to prevent dirty file cache buffers. On a ffs filesystem,
once a hole is filled, subsequent vnd accesses find will find valid
VOP_BMAP() translations.
Concerns:
* is the assumed semantics correct for all filesystems?
* do we actually want the automagic extension on the VND
backing store..
1997-05-25 22:27:16 +00:00
pk
740da4fa88
Use an additional structure to keep information on a set of transfers
...
initiated by vnd_strategy(). This allows for more natural error handling
and solves two bugs:
* vnd can disk_unbusy without disk_busy (PR#2657)
* b_resid is set correctly on the external at the end
of a transfer in case of an error.
1997-05-25 19:37:36 +00:00
pk
317703b784
Pass correct transfer count to disk_unbusy().
1997-05-25 16:21:45 +00:00
jonathan
84f22cdf55
lint: delete unused variables.
1997-05-25 05:48:14 +00:00
pk
ec02e14ae2
Remove all `bustype' arguments from map[io]dev() and REG2PHYS().
1997-05-24 20:16:06 +00:00
pk
c6a933f6ea
Remove all `bustype' arguments from map[io]dev() and REG2PHYS().
1997-05-24 20:15:59 +00:00
jonathan
3bdc896e84
lint: fix %x vs pointer and tyops in error-logging printfs.
1997-05-24 09:48:53 +00:00
thorpej
97c6a307e3
Where _is_ that brick when you need it?!
1997-05-24 03:45:40 +00:00
jeremy
b06eb8ce7f
Comment reference to ramdisk.h -> md.h
1997-05-23 23:44:34 +00:00
augustss
72b5ba3901
Redo the way selecting the mode for SB cards is done completely.
...
It is now table driven since there are so many different variations
of SB cards out there.
Also fix a bug that stopped SB2 and SBPro from working.
1997-05-23 21:19:59 +00:00
augustss
c612a6fca7
Check that setting IRQ and DRQ on SB16 actually succeeds.
1997-05-23 09:45:40 +00:00
augustss
1fd29f4172
Make the audio default parameters into a globally accessible constant.
1997-05-20 12:51:43 +00:00
augustss
0db08d11e6
Redo the SB mixer code. The driver can now distinguish between the
...
four different mixer options: none, CT1335, CT1345, and CT1745.
It should now be possible to access most of the SB16 functionality.
1997-05-19 23:14:29 +00:00
pk
0dae2eb53d
Avoid negative values for `b_dirtyend' and `b_validend'.
1997-05-19 22:08:56 +00:00
pk
7a45e8a551
Fill in b_dirtyoff/b_dirtyend and b_validoff/b_validend appropriately
...
in each auxiliary buffer; the strategy routines (esp. NFS's) like that.
1997-05-19 14:41:54 +00:00
mrg
ac74fdbb9c
KNF.
1997-05-19 04:01:16 +00:00
thorpej
50a39a3334
Add NetBSD RCS IDs.
1997-05-18 06:08:02 +00:00
augustss
8d6f509439
Mask the level registers as the documentation suggests.
1997-05-18 00:36:03 +00:00
augustss
d7a82223f4
Change lowater calculation a little.
...
Fix mixer setting bug and add some missing splaudio().
Set SB drq16 to 5 and don't pretend to be SB v1.0.
1997-05-17 23:26:33 +00:00
pk
d3844873e8
Mods for ESP406/FAS408 ISA SCSI driver (from Eric S. Hvozda; PR#3581)
1997-05-17 20:58:47 +00:00
pk
7f4962f3f3
An ESP406/FAS408 ISA SCSI adapter driver (from Eric S. Hvozda; PR#3581)
1997-05-17 20:58:12 +00:00
pk
990857fe21
Mods for ESP406/FAS408 SCSI driver (from Eric S. Hvozda; PR#3581)
1997-05-17 20:56:55 +00:00
augustss
abdd4ddbea
Back to pretending to be a SB v1.0 again, the mixer code for higher
...
versions is buggy.
1997-05-16 07:07:22 +00:00
pk
72d640a497
Tweak gain curve (from nsayer@kfu.com; PR#2909)
1997-05-15 22:32:56 +00:00
thorpej
151926da32
Make sure we're in register window 0 before attempting EEPROM access,
...
pointed out by Matthias Drochner.
1997-05-14 00:22:00 +00:00
augustss
37be371415
Clean up emulation code, SB, and GUS drivers and add some more encoding
...
emulation to SB.
1997-05-13 19:02:11 +00:00
jtk
d01ff6bdaa
regen
1997-05-13 14:45:39 +00:00
jtk
68187ebd40
correct the identification of Intel Orion PCIset chips
1997-05-13 14:44:54 +00:00
jtk
877dcf7fc9
restore accidentally-lost set of nchannels in driver layer
1997-05-12 04:11:43 +00:00
jonathan
fac2cd30a0
Set TX-available threshhold in epinit() just before enabling interrupts,
...
so TX_AVAIL intrs are enabled for root-on-NFS kernels.
Tested (and required) on 3c595TX with root-on-NFS kernel booted from floppy.
1997-05-11 05:47:08 +00:00
augustss
4b487c00bd
Clean up audio_silence_copyout().
1997-05-11 00:41:12 +00:00
jtk
c7be49441e
fix typo: LINEAR should have been ULINEAR
1997-05-10 19:01:53 +00:00
jtk
9734adc67f
use normal linear names/values for 8-bit encodings
...
mark mulaw as emulated (it's done via a mapping table)
use GUS query encoding routine, even on GUS max, since the encoding
stuff is handled by the GF1.
XXX might not be right for recording, but it's correct for playback.
1997-05-10 18:58:33 +00:00
augustss
e63a553175
Change the interface between high and lowlevel audio drivers again:
...
Set the encoding parameters slightly differently.
Remove the SW encoding/decodinf functions from this interface
and move them to the audio_parameter struct; this is both more efficient
and flexible.
1997-05-09 22:16:27 +00:00
thorpej
fd9b64b81a
Garbage-collect an unneeded #ifdef.
1997-05-08 04:39:35 +00:00
thorpej
158a6e52a4
Garbage-collect and uneeded #ifdef.
1997-05-08 04:39:03 +00:00
augustss
07cf0ea21d
Oops, forgot this in previous commit.
1997-05-07 20:23:53 +00:00
augustss
c397fa8357
Return audio buffer size in audio_info_t with ioctl() AUDIO_GETINFO.
...
Use the buffer size to implement one more OSS ioctl().
1997-05-07 19:24:25 +00:00
augustss
c4a52794f1
Convert to new orthogonal audio encoding scheme and implement
...
some of the new encodings. The change to ioctl AUDIO_GETENC is
NOT backwards compatible.
1997-05-07 18:51:31 +00:00
thorpej
b5c783c6e4
Merge 970327 "de" update.
1997-05-07 18:45:01 +00:00
mikel
383d8e6f79
update sb_printsc() to match current reality.
1997-05-07 04:36:00 +00:00
gwr
58abe62fde
Update an obsolete comment. (We DO handle CapsLock and NumLock.)
1997-05-02 17:41:37 +00:00
jeremy
3aa6ce0369
Moved from arch/sun3/sun3 and changed according to implied references
...
in recent commits to sun3/clock.c and sun3x/clock.c by Gordon Ross.
1997-05-02 06:15:28 +00:00
pk
31b943b8ac
Preliminary support for ESP406 and FAS408 variants (from Eric Hvodza; PR#3559)
1997-05-01 22:16:24 +00:00
marc
8f6ec1a681
wds_find has the sense of its return value backwards (0 vs 1). This
...
caused the probe to succeed when there was no device present.
1997-05-01 20:10:57 +00:00
kleink
269ccaa71b
Fix typo in last commit; from Thorsten Frueauf <frueauf@ira.uka.de>
...
in PR/3566.
1997-05-01 12:27:10 +00:00
scottr
cd3abdf098
Fix typo in last change.
1997-04-30 19:16:23 +00:00
scottr
c0d7fd03ae
Remove the use16bit softc field, replacing the functionality with dcr_reg.
...
This allows the front end to override the default DCR (byte-wide DMA,
x86 byte order, 8-byte FIFO) with different transfer size, byte order, DMA
parameters, and FIFO threshhold. If the loopback select bit is not set for
normal operation, the default is used instead.
Inspired by thoughts from Bernd Ernesti.
1997-04-30 18:09:14 +00:00
augustss
2fb1d088c5
XXX Pretend that all SB cards are of model 1.
...
XXX This way you can at least use SB cards until the real fixes go in.
1997-04-30 02:08:12 +00:00
augustss
526ef2f618
Change the interface between the high and low level audio drivers
...
so that all audio encoding parameters are set at once. This simplifies
the interface and make error checking easier.
1997-04-29 21:01:33 +00:00
scottr
ad24724cbc
Machine-independent driver for DP8390/WD83C690-based Ethernet controller.
...
Derived from the ISA if_ed driver and the mac68k if_ae driver.
1997-04-29 04:32:07 +00:00
mycroft
37cb09ba66
DTRT if OF_read() returns 0 when no data is available.
1997-04-28 18:33:57 +00:00
mycroft
d8615e4fb9
Oops; forgot to GC the last mbuf allocated when out of clusters.
...
Also, DTRT if OF_read() returns 0 when no data is available..
1997-04-28 18:32:58 +00:00
mycroft
bc66bb3e6e
Oops; forgot to GC the last mbuf allocated when out of clusters.
...
Also, remove the internal mbuf queue, which is not needed by this driver.
1997-04-28 18:30:20 +00:00
mycroft
103c7d360d
Oops; forgot to GC the last mbuf allocated when out of clusters.
1997-04-28 17:03:58 +00:00
mjacob
b3192632db
On alpha, sizeof (long) != sizeof (int) and sizeof (int) != sizeof (ptr_t)
1997-04-28 15:52:44 +00:00
mjacob
ac6fbba3ac
On alpha size_t is not an int, ergo last argument to dma setup glue
...
function can't be a pointer to an int.
1997-04-28 15:43:47 +00:00
pk
94eaf1bb04
Implement target selection using DMA.
...
To allow a period of testing the variable `ncr53c9x_dmaselect' is used to
enable this feature (default is 0, i.e. the old behaviour).
1997-04-27 22:08:51 +00:00
jonathan
dbf4f7b71f
* Tidy PHY [sic] selection code in epsetmedia().
...
* epinit() had both explicit xcvr selection for 3c589 and a call
to epsetmedia(). The first is redundant; delete it, and EP_COAX_DEFAULT.
* Update comments to reflect 3c589 and 3c509B fixes. Fix typos.
1997-04-27 21:09:56 +00:00
veego
1b80d8dd97
Add other isapnp id's for the 3c509.
1997-04-27 09:46:50 +00:00
veego
f05fad5ad9
- Add a new variable to epaddcard to call epconfig with the right chipset.
...
- Don't attach a 3c509 in PnP mode.
1997-04-27 09:44:45 +00:00
veego
bf37fc50d0
Rename the PROD_ID to PROD_ID_3C509 to make it possible to add other
...
product id's, e.g. for the 3c515.
1997-04-27 09:42:34 +00:00
veego
a2e1f15ba7
- Replace the check for EP_BUS_PCMCIA in epsetmedia with a check for
...
EP_CHIPSET_3C509 and change it a bit so it works now with the 3c509
and still works with the 3c589.
- KNF
1997-04-27 09:38:50 +00:00
augustss
81a10d7725
Don't require that a device is open for writing to perform a raw
...
SCSI command that just reads.
1997-04-26 22:24:46 +00:00
jonathan
593e5dd8e1
Pad of first mbuf in chain, even if it's a cluster (pr 3536).
...
Garbage-collect padding of header mbuf.
1997-04-25 20:14:37 +00:00
explorer
60a6c8d34b
Add isapnp attachment for com driver
1997-04-25 15:26:11 +00:00
mycroft
91a808523c
Fix typo in previous.
1997-04-24 08:05:13 +00:00
mycroft
b65e62c6c4
If we fail to allocate a cluster to hold a large packet, simply
...
drop it rather than using a chain of tiny mbufs.
Do not force the initial part of a packet into a separate mbuf.
1997-04-24 02:36:46 +00:00
mycroft
68258fba20
Do not force the initial part of a packet into a separate mbuf.
1997-04-24 02:25:36 +00:00
mycroft
581399fc4c
If we fail to allocate a cluster to hold a large packet, simply
...
drop it rather than using a chain of tiny mbufs.
1997-04-24 02:24:04 +00:00
mycroft
030c7010ee
If we fail to allocate a cluster to hold a large packet, simply
...
drop it rather than using a chain of tiny mbufs.
1997-04-24 02:04:33 +00:00
mycroft
db2332eb26
Another silly CD-ROM drive...
1997-04-24 00:49:14 +00:00
cjs
9be8b65e23
Smaller, cleaner code for aligning struct ip on receipt.
1997-04-23 08:15:03 +00:00
cjs
5c8bf48817
Align struct ip on incoming packets for all types of cards, not just
...
32-bit ones.
1997-04-22 21:19:11 +00:00
thorpej
6102bc8ec2
And Yet Another Broken IBM disk (the 664 this time), once again
...
reported by Hubert Feyrer <feyrer@grizu.fh-regensburg.de>.
1997-04-20 01:30:30 +00:00
thorpej
f9bc642a6d
Add Yet Another Broken IBM disk to the SDEV_AUTOSAVE list. This one
...
doesn't report a vendor string (yuck)!. Problem reported by
Hubert Feyrer <feyrer@grizu.fh-regensburg.de>.
1997-04-20 00:55:05 +00:00
pk
f2c53e4c3d
Two more quirks:
...
Python 28454-XXX tape drive: NOLUNS
1588-15MBSUN0669 disk: AUTOSAVE
1997-04-19 21:32:37 +00:00
pk
231a4bfb1f
Remove bogus pointer cast.
...
Accept FIONBIO ioctls.
1997-04-19 21:25:43 +00:00
cgd
5cfcabc2fe
compile when __BROKEN_INDIRECT_CONFIG isn't defined.
1997-04-18 00:50:33 +00:00
mikel
7aa8facf27
end line after printing WIDE SCSI status; fixes PR kern 3505.
1997-04-17 07:21:14 +00:00
thorpej
48b6d2a6f3
Update for no __BROKEN_INDIRECT_CONFIG.
1997-04-16 23:41:53 +00:00
thorpej
8338396bf4
- Update for no __BROKEN_INDIRECT_CONFIG.
...
- Fix BPF hooks.
1997-04-16 23:41:19 +00:00
thorpej
2747d6c890
- Update for no __BROKEN_INDIRECT_CONFIG.
...
- Determine and remember if we are a floppy.
- Workaround for what is apparently a firmware bug - ignore the sector
size returned by the device. On my Firepower's floppy, block-size
is the same as max-transfer, which causes Lossage.
- Don't read the disklabel on a floppy; do what the ISA floppy driver
does, which is assign the entire disk to each "partition", although
we do not deal with the density stuff.
- FIREPOWERBUGS -> FIRMWORKSBUGS
- Some general cleanup.
1997-04-16 23:39:28 +00:00
thorpej
991fede269
Update for no __BROKEN_INDIRECT_CONFIG.
1997-04-16 23:32:04 +00:00
cgd
78b378b2bc
create pci_mapreg_info() which simply gets mapping register information.
...
It's used by pci_mapreg_map() and can be used directly by drivers
with special needs (e.g. those being attached as console devices).
1997-04-13 22:05:10 +00:00