5cb4cacff1
Add some things needed by KGDB
1996-02-16 20:04:36 +00:00
49b1d84e94
Resurrecting db_memrw.c to hold some code shared by ddb and kgdb.
1996-02-16 19:11:27 +00:00
5404ccfbd7
Improved delay() implementation with lower overhead,
...
makes very short delays much more accurate.
1996-02-16 18:06:11 +00:00
bcfac202c8
No longer need delay2us(), just use delay(2)
1996-02-16 18:00:33 +00:00
8b686f43c0
machdep.c
1996-02-13 19:40:22 +00:00
243011c19d
pass correct type to setjmp
1996-02-13 19:39:08 +00:00
89c2f6dc04
now in sys/dev
1996-02-13 17:29:15 +00:00
9e07977e11
no longer useful
1996-02-13 17:27:41 +00:00
44aab5f4d3
make pmap_page_index return int
1996-02-12 21:21:15 +00:00
2e06ee143c
Avoid 3/50 H/W bug (I hope)
1996-02-12 05:19:09 +00:00
c0a9716f6e
Fix address wrap in bus_mapin
1996-02-12 05:14:19 +00:00
f4cc5b017a
eliminate setjmp.h
1996-02-09 21:51:39 +00:00
753fe3a25a
Fix mkdep problems due to missing flags.
1996-02-09 02:21:13 +00:00
718ac5d246
[import changes from sparc port]
...
- moved disk_busy() call from xdstrategy() to xdc_startbuf()
[prevents disk_unbusy panic when disk is loaded (if no
free IOPBs, xdstrategy() would queue the buffer for pickup
by xdcintr() but xdcintr() would never call disk_busy().
xdc_startbuf() is a better place since all bufs are routed
through here] problem detected by girish@dworkin.wustl.edu ,
diagnosed and corrected by me.
- move disk_unbusy() call in xdc_remove_iorq() before the call to
XDC_FREE() [don't want to access a data structure that was just put
on a free list]
1996-02-08 04:42:57 +00:00
2c8314f73c
vm prototype changes
1996-02-05 02:06:38 +00:00
b1e9c83633
Quick fix to make this build. More to come...
1996-02-04 06:06:12 +00:00
5bc076e17e
Use `-traditional-cpp' when building .s and .S files.
1996-02-03 00:43:50 +00:00
dcd66e9f4d
Clone these, and fix many bugs.
1996-02-02 20:08:17 +00:00
9db20bf150
Don't define _KERNEL here.
1996-02-02 19:42:08 +00:00
fc9d84fb46
assym.s -> assym.h
...
(Some ports did this already.)
1996-02-02 02:34:09 +00:00
88e512b693
LOCORE -> _LOCORE
1996-02-01 22:28:24 +00:00
6cc7bd528f
Oops, didn't notice those type warnings...
1996-01-31 17:20:39 +00:00
f2e57c6dc8
Eliminate remaining direct references to the z8530 chip
...
to allow the MD access functions to do delays, etc.
1996-01-30 22:34:52 +00:00
0d44b7f3fe
Include m68k/fpe/files.fpe for FPU emulation support (fixes PR 1773)
1996-01-30 00:35:28 +00:00
57664ea85c
Oops, did not mean to check that one in...
1996-01-29 23:59:04 +00:00
38c7f668a2
Clean-up open/close logic of "net" device. Fixes PR 1726
1996-01-29 23:54:14 +00:00
4541c9f5c6
Work-around sensitivity to DVMA address in PROM revision 2.6 so the
...
netboot program will work on Sun3/50 machines. Also fixes PR 1928.
1996-01-29 23:41:03 +00:00
f261ae08c7
Update for the new z8530 driver
1996-01-24 22:39:48 +00:00
16e4c58c47
file z8530var.h was initially added on branch netbsd-1-1.
1996-01-24 21:13:22 +00:00
8f339409b7
sync with sparc:
...
- move disk_attach() to before reading the disk label as per Jason.
otherwise we are reading into an unallocated buffer (oops!)
1996-01-13 03:50:05 +00:00
5b39541e48
New generic disk framework. Highlights:
...
- New metrics handling. Metrics are now kept in the new
`struct disk'. Busy time is now stored as a timeval, and
transfer count in bytes.
- Storage for disklabels is now dynamically allocated, so that
the size of the disk structure is not machine-dependent.
- Several new functions for attaching and detaching disks, and
handling metrics calculation.
Old-style instrumentation is still supported in drivers that did it before.
However, old-style instrumentation is being deprecated, and will go away
once the userland utilities are updated for the new framework.
For usage and architectural details, see the forthcoming disk(9) manual
page.
1996-01-07 22:01:38 +00:00
2fce159ff8
Changed name of sigaltstack's ss_base field to ss_sp to match XPG4.2 and
...
traditional usage.
1996-01-04 22:21:33 +00:00
7e01b868cc
It's safe to use <dev/ic/ncr5380*.h> now.
1996-01-01 22:51:26 +00:00
e9d1c5366d
ncr5380sbc attribute is now defined in sys/conf/files.
1996-01-01 22:48:55 +00:00
3da4b2a160
The IST_* and IPL_* constants are not bus-specific; don't treat them as such.
...
Change splimp -> splnet in Ethernet, ARCnet, and FDDI drivers.
1995-12-24 02:29:35 +00:00
ce000f04ef
Remove deprecated cpu_setstack().
1995-12-21 05:01:32 +00:00
de6dad9228
Move bcopy/ovbcopy/memcpy into m68/m68k/copy.s, which is used by all
...
m68k ports already anyhow. No use in keeping 6 identical copies of this
function around.
1995-12-11 02:37:55 +00:00
9ca6a401eb
Use the MI LANCE code.
1995-12-10 08:46:05 +00:00
0e0ac5ed68
cpu_fork() now returns void.
1995-12-09 04:37:23 +00:00
86f10d8343
Switch to ncr_si (will just do PIO for now) and cleanup
1995-11-17 23:31:11 +00:00
0ee10ff487
Give translated label a valid magic number
1995-11-17 23:30:19 +00:00
c01eb77976
cosmetic
1995-11-17 23:29:30 +00:00
5d5c8d0d4b
Latest, greatest version of the new NCR driver.
...
DMA works! Interrupts work! Disconnect/reselect works!
To be paranoid, leave that all disabled for now...
1995-11-17 23:27:41 +00:00
6b20139b41
Add copyright
1995-11-17 23:24:56 +00:00
92b8a2d9e5
just cleanup
1995-11-17 23:23:44 +00:00
70065d9d16
Fix a comment while I'm here...
1995-11-10 22:05:52 +00:00
01655dec81
Need to define KERNTEXTOFF for kvm_mkdb
1995-11-10 22:04:48 +00:00
3dcdca7c52
Allow unit != 0
1995-11-10 21:59:30 +00:00
3c996d6b06
ufs ==> ffs
1995-11-07 23:01:40 +00:00
7ff18ba0a2
The xy goes on VME16, not VME32.
1995-10-30 21:15:40 +00:00
1195faa6f4
Add the function isbad(), needed by xd/xy drivers.
1995-10-30 20:59:27 +00:00
b3a6cbaeb0
New from Chuck Cranor: drivers for SMD disks!
...
xd: Xylogics 753/7053 SMD disk controller
xy: Xylogics 450/451 SMD disk controller
These now compile, but have not been tested.
1995-10-30 20:58:04 +00:00
93d0f65970
New SCSI driver for the NCR5380, by David Jones.
...
Does DMA with interrupts. Much faster than our old
driver which did only PIO transfers. (Thanks David!)
Could be used on the amiga, and probably others...
1995-10-29 21:19:06 +00:00
1e3a9a42c6
Fix previous change that broke kd console
1995-10-29 04:15:59 +00:00
014044ef1a
Fix formatting
1995-10-28 20:43:49 +00:00
57a52744c1
Fix names (vtrace ==> sys_vtrace, etc.)
1995-10-27 15:58:23 +00:00
f966527839
Work around the LANCE Rev. C bug in a way that does not cause error
...
messages when BPF puts the interface in to promiscuous mode.
1995-10-27 15:53:39 +00:00
f2345fb358
Use correct size access (char,short,int) in db_read_bytes, db_write_bytes
...
otherwise access to some device registers will give misleading results!
(I learned this the hard way while debugging the NCR SCSI driver...)
1995-10-23 18:40:35 +00:00
126ecc3dda
Explain why sun3_context_equiv() can not just call set_segmap_allctx().
1995-10-17 23:16:40 +00:00
9182ffe624
Get rid of an extra twiddle() call (ufs.c does it.)
1995-10-17 23:07:19 +00:00
ca022f8909
Re-write of tapeboot, using a "rawfs" abstraction to hide the fact
...
that the device only supports block access. (Even works now!)
1995-10-17 22:58:10 +00:00
6af0af5daf
Change the interface to prom_iopen() slightly, for tapeboot.
1995-10-13 21:44:57 +00:00
52f39566b5
Add tapeboot, make ${SA_PROG}.bin padded to a block boundary.
1995-10-13 21:44:08 +00:00
c4e07b055f
Bump version number.
1995-10-13 21:33:09 +00:00
c890f5c659
Boot program to help load tape kernels.
...
(You can even choose a tape segment!)
1995-10-13 21:27:30 +00:00
df737690d7
Remove (again) things accidently revived by cvs tag...
1995-10-13 19:37:06 +00:00
22bcf4e552
New function: set_segmap_allctx()
1995-10-10 21:38:56 +00:00
1b2cf12fa7
Need to use set_segmap_allctx() on kernel-space segments.
...
(Thanks again to David Jones!)
1995-10-10 21:37:29 +00:00
4575a77421
Get rid of things now in libkern: bzero, bcmp, strlen
1995-10-10 21:35:42 +00:00
464d1686fd
sysarch --> sys_sysarch
1995-10-10 21:34:50 +00:00
127019022a
SUNOS_SYS_sunos_sigreturn -> SUNOS_SYS_sigreturn
1995-10-10 21:33:33 +00:00
f1b8ad3645
New function: set_segmap_allctx()
1995-10-10 21:29:02 +00:00
dda519e3d9
The previous hack to save two instructions when the
...
return value of splx() was ignored did not prevent the
optimizer from re-ordering the asm statements! (Yikes!)
Revert this to the old, single asm statement method.
Thanks VERY MUCH to David Jones for finding this!
1995-10-10 21:28:00 +00:00
facfdf5c60
Use sys/scsi/files.scsi
1995-10-10 21:25:29 +00:00
fa87e5bdfc
Minor cleanup re. Debugger() calls...
1995-10-08 23:48:22 +00:00
90af367f9e
Make arpintr() call conditional on NETHER
1995-10-08 23:47:34 +00:00
48500ffdd6
Add rd, xd, xy. Sort the includes.
1995-10-08 23:46:27 +00:00
0ed357402a
Fix a big "oops" (Many thanks to David Jones!)
1995-10-08 23:45:10 +00:00
3d587a6700
Link this -static
1995-10-08 23:44:02 +00:00
09cbbafa0a
Minor cleanup.
1995-10-08 23:42:58 +00:00
f5bcca1fab
Machine-dependent part of the new RAM-disk driver.
...
This module lets one build a stand-alone kernel.
1995-10-08 23:42:42 +00:00
1b6586b2bb
Note that this should be merged with dev/ic/i82586reg.h
1995-10-08 23:41:36 +00:00
13fa3c4fe6
Temporary hack to restrict open to root or the
...
same UID as the session attached to /dev/kd
1995-10-08 23:40:42 +00:00
2d50d2a6b9
Add RAMDISK, move some things around.
...
Add rd*, xd*, xy* (only rd is done).
1995-10-08 23:38:41 +00:00
245f292fed
Prefix names of system call implementation functions with `sys_'.
1995-10-07 06:25:19 +00:00
995b4710b8
Correct mapinfo for Multibus PROM devices.
1995-09-26 21:30:19 +00:00
50201d2bb5
Fix comment, add copyright.
1995-09-26 21:29:25 +00:00
3c868e07f9
New DVMA interface, and various cleanup.
1995-09-26 04:01:53 +00:00
48fc6c37a0
Correct child_return() so child is charged for its cpu time.
1995-09-26 03:53:46 +00:00
23ee56022d
Cleanup, and catch up with libsa changes.
1995-09-23 03:42:17 +00:00
13d9b9d700
Sync up with the sparc version.
1995-09-23 03:40:28 +00:00
970f736653
Compile the kernel with -Werror -fno-builtin.
1995-09-19 23:54:29 +00:00
7d7396c414
Make system calls conform to a standard prototype and bring those
...
prototypes into scope.
1995-09-19 22:53:47 +00:00
29053c58b2
SA_ONSTACK --> SS_ONSTACK
1995-09-01 20:05:59 +00:00
356b42ba70
inclide -> include; PR #1400
1995-08-22 19:39:23 +00:00
acbfd7b67d
Fix vectored interrupts, and do autovectored ones similarly.
1995-08-21 21:37:36 +00:00
35a5b206df
If a swap entry is being used as root, do not swap there.
1995-08-21 21:36:25 +00:00
66dcd8fd69
Add entries for the ccd.
1995-08-17 17:40:42 +00:00
238eb3d35a
Correct a comment re. splnet
1995-08-15 17:41:38 +00:00
2666f17777
SCSI bus phase not valid until REQ is true (Fix from David Jones).
1995-08-14 20:00:00 +00:00
gwr