a56625ebf4
forgot ufs -> ffs...
1995-08-25 21:31:12 +00:00
1cf91eafdf
etc files specific for vax added.
1995-08-25 21:25:09 +00:00
503d3c4927
Add constants for CSI's communications card.
1995-08-25 21:20:57 +00:00
f3997751d0
Change all occurences of ufs to ffs.
1995-08-25 19:17:28 +00:00
c94617858b
Just use umask(0);
...
Use mktemp() for temporary file creation.
1995-08-25 11:35:35 +00:00
4edc2f666b
Ensure the hints file is readable.
1995-08-25 10:10:15 +00:00
f6797ed4f1
Install the manual page.
1995-08-25 10:08:45 +00:00
389484fe28
New kernels from Matthias Pfaller and addition of oldncr driver.
1995-08-25 07:58:21 +00:00
441cd76f8f
Changes by Matthias Pfaller for generic support and dumping.
1995-08-25 07:52:18 +00:00
0a3111b255
Various changes (from Matthias Pfaller) including support for a
...
more generic distribution kernel and dumps.
1995-08-25 07:49:04 +00:00
47ff5d6b3d
More changes to the "new" ncr interrupt driven scsi driver (from M. Pfaller)
...
Bring back the old polled driver until a kernel built with the interrupt
driven one is stable enough for production use.
1995-08-25 07:30:33 +00:00
32b3e66891
New way to calculate load address from Matthias Pfaller.
1995-08-25 05:11:36 +00:00
ac0af4229f
Change VIA2:vPCR setting to allow scsi IRQ and DRQ.
1995-08-25 02:56:41 +00:00
60e0c381c1
Fix autoconfig table initializers for 3MIN (tested) and MAXINE (untested).
1995-08-24 22:32:18 +00:00
f525d4b280
Cleaned up an old #ifdef vax.
1995-08-24 19:58:07 +00:00
bbfb3349c0
Call doshutdownhooks() before resetting the CPU. This should probably
...
be in architecture-independent code.
1995-08-24 19:16:47 +00:00
5362187bf6
Removed unnecessary #ifdef vax that broke compilation.
1995-08-24 17:04:40 +00:00
f73f65da20
couple fixes from Eduardo E. Horvath eeh@btr.com
1995-08-24 15:46:19 +00:00
ce6374e6be
Do not terminate the search on errors other than ENOENT.
1995-08-24 05:26:35 +00:00
9232c298a8
Upgraded to Taylor UUCP 1.06.1 (Thanks to John Kohl).
1995-08-24 05:18:33 +00:00
1ed5c0babc
Some code to support a vector passed in from booter 1.8.
1995-08-24 04:27:16 +00:00
0484bdaf59
Don't panic on NMI and only take notice if DDB.
1995-08-24 04:25:07 +00:00
67c6c5cc72
don't define yydebug unless YYDEBUG is also defined; PR #1402
1995-08-24 00:45:23 +00:00
72e901b9ff
syscalls.master changed
1995-08-23 20:19:15 +00:00
28d9d64235
Emulate some syscalls that appear in Linux 1.3: a select() with normal args,
...
getdents() and flock().
1995-08-23 20:17:28 +00:00
d6160bdc1b
Fix typo in comment, from Chris P. Ross.
1995-08-23 01:08:10 +00:00
38634f3a18
Fix up a printf(), from Chris P. Ross.
1995-08-23 01:06:59 +00:00
5194080841
Put SIOCGETVIFCNT and SIOCGETSGCNT in group `u'. This is consistent with
...
other systems' integration of Multicast release 3.5 and fixes the ENXIO
that these controls used to produce.
1995-08-23 00:40:47 +00:00
1f3a168f04
Call mount_ffs instead of mount_ufs; PR #1379
1995-08-22 19:58:33 +00:00
4086abf6dd
ufs -> ffs; PR #1381
1995-08-22 19:52:25 +00:00
0da9212559
recommanded -> recommended; PR #1395
1995-08-22 19:43:06 +00:00
356b42ba70
inclide -> include; PR #1400
1995-08-22 19:39:23 +00:00
a13d94f0b7
Change default magtape from /dev/rmt12 to /dev/rst0; PR #1399
1995-08-22 19:36:00 +00:00
0ed73b3dc5
/usr/local/etc/zoneinfo -> /usr/share/zoneinfo; PR #1398
1995-08-22 19:28:15 +00:00
0c25c748fe
Example fstab files.
1995-08-22 17:28:54 +00:00
90a621b682
Fixed USRPTSIZE trouble. Cleaned up.
1995-08-22 04:34:17 +00:00
8522bd48f3
Move the pmax scc driver from sys/arch/pmax/dev to sys/arch/pmax/tc,
...
as it's a driver for a device under a TC IOASIC. The Alpha port also
has its scc driver in tc/scc.c, and the pmax driver scc is nearly the same
as the Alpha.
1995-08-22 04:28:41 +00:00
4ff0530b57
Changed way to calculate USRPTSIZE.
1995-08-22 04:28:20 +00:00
7cd62a508c
Check for status NULL argument in wait4 and waitpid. From PR #1392
...
by Thomas EberHardt.
1995-08-21 23:15:51 +00:00
7560ab9b68
Rework the pmax scc driver, which hadn't changed much from the 4.4bsd
...
pmax driver, to be diffable with the NetBSD Alpha driver. Specifically,
the pmax driver now uses register names dev/ic/z8530.h. The driver now
uses new-style config and dynamically-allocated softc structures. The
driver no longer resets the "other" channel on an SCC when changing tty
parameters. The #ifdef'ing away of processing of the output clist for
non-console lines is no longer done. (Non-console serial ttys might even
work now.) Other discrepancies between the pmax and alpha drivers, which I
don't understand yet, are marked by XXXes.
The 4.4bsd pmax console redirection code is still present, protected
by #ifdef TK_NOTYET. Diffs from the Alpha scc driver are now minimal.
Verified to boot on a Decstation 5k/240.
1995-08-21 21:42:10 +00:00
f05156d7e2
rbootd.8 went away.
1995-08-21 21:41:02 +00:00
acbfd7b67d
Fix vectored interrupts, and do autovectored ones similarly.
1995-08-21 21:37:36 +00:00
35a5b206df
If a swap entry is being used as root, do not swap there.
1995-08-21 21:36:25 +00:00
97cf65df4a
Change pmax ASC driver to use dynamically-allocated softc structures.
...
Concomitant changes to code that prints driver/unit name: use dv_xname
and dv_unit, instead of doing pointer arithmetic on elements of the static
softc array.
Remove support for old config. The old-config "driver" structure
is still present, because the pmax non-MI SCSI driver needs it.
Merge some off Per Fogelstrom's changes for the Pica driver,
which uses the machine-independent SCSI code. This is #ifdef'ed
out until the DMA is fixed to work on Decstations, too.
1995-08-21 21:22:43 +00:00
a2db2c1899
Fix typo, pointed out by cross@va.pubnix.com (Chris P. Ross).
1995-08-21 18:25:52 +00:00
6799ca3972
Use new-style RCS ids.
1995-08-21 17:05:08 +00:00
fc5cbfd4ca
A few things:
...
* Don't compute the basename, use __progname.
* Use daemon() to detach.
* Use err(3) functions where appropriate.
* Remove some old 4.2 stuff.
1995-08-21 16:57:54 +00:00
ce63fbf5f1
Bug fix in byte_swap_word(); didn't always make it.
1995-08-21 16:36:32 +00:00
ec2f82abad
Kill redundant (and out of date) version. It's also included with the
...
rbootd source.
1995-08-21 15:55:41 +00:00
d9e37f2bc7
Set the scsi link before calling config_attach(), so target/lun info is
...
available to, say, dk_establish().
1995-08-21 09:30:09 +00:00
ragge