Commit Graph

44 Commits

Author SHA1 Message Date
augustss 42fb510148 Move the mpu device declaration to conf/files.
Let the mpu device attach at the sb device, and then midi at the mpu.
Update the mpu at eso attachment.
1999-08-02 17:37:41 +00:00
augustss cbf1f6f1b9 Move the MPU driver isa/ to ic/.
(I didn't move it in the repository because the revision history
is very short and uninteresting. :)
1999-08-01 18:05:39 +00:00
mycroft 97de30ff26 Several things:
* Rearrange the speed mapping table and adjust the code so that the highest
  rate can actually be used.  Previously we ended up rounding up slightly
  lower speeds and then losing because set_params couldn't set the mode
  back to the current one.
* Allow 260 as a valid I/O address, since the SB1 can be jumpered to this.
* Change the MPU-401 code so it can be attached as a separate device.
  (XXX Really, the SB code ought to just attach a subdevice itself.)
* Do not attach an OPL on the SB1.  Writing to the OPL registers at
  SB_base+0 on this card wedges my machine.
  (XXX Should we access it at 388 instead?  The Creative web site claims
  that this board *does* have an OPL2, but I haven't played with this
  extensively.)
* Allocate the SB DMA channels at open time, rather than attach time, so
  that a single DRQ can be used for multiple cards (if only one is in use
  at a given time).
  (XXX Let me tell you why this is a horrible hack.  If the ISA DMA code
  tries to allocate a bounce buffer after boot time, it will generally fail,
  because there is no contiguous memory below 16MB and the code to allocate
  contiguous pages doesn't know how to move things around.  Now, we
  shouldn't ever be using bounce buffers here, because we use
  isa_dmamem_alloc().  So we just turn off BUS_DMA_ALLOCNOW and we don't
  actually try to.  That's cool, and it even works, but isa_dmamem_alloc()
  has the same problem.  It just happens that we allocate the ring buffers
  at boot time, and whenever we reallocate them (due to the buffer size
  changing), we just deallocated the previous (contiguous) buffer, so we get
  lucky.  This is absolutely disgusting and needs to be fixed.)
1999-03-22 07:37:35 +00:00
mycroft 4822d3d0b0 Move IRQ setup into frontend. Need to move DRQ handling as well. 1999-02-19 16:10:44 +00:00
mycroft 81bc49921a Remove some superfluous softc elements. 1999-02-18 15:47:29 +00:00
mycroft 5e2fc07a14 Add separate halt_output and halt_input routines. 1999-02-18 07:08:35 +00:00
mycroft e5f5e628d2 Pass the direction to the allocm and round_buffersize methods.
Some drivers need this to properly allocate DMAable memory.
1999-02-17 02:37:38 +00:00
mycroft 3dcff6581b Use the new trigger_{in,out}put interface.
Also, even on the SB1, we can leave the DMA controller in auto-initalize
mode and just send a command to the board for each block.  This may help
prevent FIFO underruns.
1998-08-10 00:20:39 +00:00
augustss 48bae9ee88 Add MIDI support. The MIDI devices can be accessed as ``raw'' through
the /dev/rmidiN devices, or with a sequencer interface via /dev/music.
So far the only supported MIDI device is the MPU401 port on SoundBlaster
(and only on SB on isapnp, since we do not have locators with multiple
values yet).
1998-08-07 00:00:55 +00:00
thorpej 3be1ffe6a0 When hooking up the interrupt handler, use an interrupt share type
specified by the front-end.
1998-06-29 22:40:56 +00:00
thorpej 5f97398507 Adjust for changes to the ISA DMA API. 1998-06-09 00:05:44 +00:00
augustss e7029fc0da Make the audio API (almost) SunOS compatible.
The changes is to allow some limited mixer manipulation through
the audio device (instead of the mixer device).
This rendered 4 methods in audio_hw_if unused so garbage collect these.
1997-10-19 07:41:33 +00:00
augustss b2004a534c Make sure the 'input' class is used even for the 1345 mixer. 1997-10-16 23:34:57 +00:00
augustss 7886f60e81 Make SB full duplex. Ooops, I forgot this in the last commit. 1997-08-30 10:45:32 +00:00
augustss cd7e93c44d Add mute and channels swap to the mixer capabilites. 1997-08-24 23:50:40 +00:00
augustss 6616d47838 - Change audio_hw_if a little: set_param now sets the play and record modes
at the same time instead by using two different calls.  This enables
  it to check more easily if the combined mode is all right.
- Improve the error checking in audio.c.
- Add a new audio property, AUDIO_PROP_INDEPENDENT, show if the
  play and record settings are independent.
- Fix some buglets in audio.c.
1997-08-24 22:31:23 +00:00
augustss c392128002 Audio:
* Make it possible to use software assisted encodings that expand the
  sample size.
* Use 16 bits per sample when emulating mulaw coding on the SB.
* Prepare for SB16 without CT1745 mixer.
1997-08-04 09:29:51 +00:00
augustss 658656bb99 Audio changes:
- Change the way attach and open works to allow multiple audio
	  devices.
	- Split the mulaw.c file into two to avoid dragging in mulaw
	  convertsion when they are not needed.  Add 16 bit alaw/mulaw tables.
	- Change the way audio properties are gotten.
	- Recognize more versions os SoundBlaster.
1997-07-31 22:33:08 +00:00
augustss a63034762b Audio: Remove the machine dependant code I put in audio.c by mistake.
This adds another method to audio_hw_if.  Also remove a field from
audio_hw_if that was not read-only.
1997-07-28 20:56:05 +00:00
augustss d58bc6796f audio: Simplify handling of AUDIO_SETFD and committing of encoding mode. 1997-07-27 23:51:48 +00:00
augustss 9745684ebe Changes to the sudio system:
- It is now possible to handle devices that want "looping" DMA,
    e.g. the SoundBlaster correctly.  The WSS and SB drivers use this.
    To do this several new methods were introduced in audio_hw_if.
  - Different silence handling (forced by previous change).
  - The audio driver can now be mmap()-ed, but due to problems in
    the VM system only for writing for now.
  - The OSS (Linux) audio emulation takes advantage of some of the
    new features.
1997-07-27 01:16:32 +00:00
thorpej 11e78a6b0d Pull thorpej-bus-dma branch into mainline. 1997-06-06 23:43:45 +00:00
augustss 72b5ba3901 Redo the way selecting the mode for SB cards is done completely.
It is now table driven since there are so many different variations
of SB cards out there.
Also fix a bug that stopped SB2 and SBPro from working.
1997-05-23 21:19:59 +00:00
augustss 0db08d11e6 Redo the SB mixer code. The driver can now distinguish between the
four different mixer options: none, CT1335, CT1345, and CT1745.
It should now be possible to access most of the SB16 functionality.
1997-05-19 23:14:29 +00:00
augustss e63a553175 Change the interface between high and lowlevel audio drivers again:
Set the encoding parameters slightly differently.
Remove the SW encoding/decodinf functions from this interface
and move them to the audio_parameter struct; this is both more efficient
and flexible.
1997-05-09 22:16:27 +00:00
augustss 526ef2f618 Change the interface between the high and low level audio drivers
so that all audio encoding parameters are set at once.  This simplifies
the interface and make error checking easier.
1997-04-29 21:01:33 +00:00
mycroft 6f51eb5c3d Use autoinitialize DMA mode on the SB2 and later. Partly from Torsten Duwe. 1997-03-20 21:42:11 +00:00
mycroft 95abb133dc Add 16-bit DRQ support on PnP, and enable 16-bit output. 1997-03-20 11:03:10 +00:00
mycroft c1cc14fa25 Combine set_encoding and set_precision into a single set_format interface. 1997-03-20 06:48:48 +00:00
mycroft ac3b8b13b7 Don't share the silence block between devices. Make silence filling work for
more encodings, and make it device-independent.  From Lennart Augustsson, in
PR kern/3305.
1997-03-13 02:19:32 +00:00
christos e6717c0bc9 - convert to bus_space_*
- split attachment code to sb_isa.c
1997-01-16 21:03:30 +00:00
christos 1c86bef3bc Fix gcc -Wall warnings. 1996-04-29 20:28:40 +00:00
jtk 8b3873367f add MediaVision Jazz16 chipset support. It must be configured with
'flags 1' on the sb? kernel configuration file line (because it frobs a
noncontiguous IO port to configure the Jazz16 extensions).

Also, remove static sb_device structure and fill in user's buffer on
each request.
1996-03-16 04:00:09 +00:00
mycroft 546ad9e88b Add support to the ISA DMA framework for auto-initialize mode.
Add experimental SB16 code, disabled for now.
1996-03-01 04:08:13 +00:00
jtk 47286969ae Add bass/treble input filter adjustment controls to SB (Pro) driver 1996-02-18 16:36:44 +00:00
mycroft 7847c9efee Various:
* Snap the sample rate when setting it, and remember only the time constant.
* Set the time constant when changing between play/record.
* Always return the actual sample rate with AUDIO_GETINFO.
1996-02-16 10:10:21 +00:00
mycroft 7af4edd731 Various, including:
* Add more delays while writing registers.
* Replace sc_dma{in,out}_inprogress with sc_dmadir.
* Eliminate the need for sc_locked.
* Add more DPRINTF()s.
1996-02-16 08:07:40 +00:00
mycroft d3c61be30b Convert IRQ, DRQ, and port numbers to int. 1995-11-10 05:01:05 +00:00
brezak c68110e043 Remove strings 1995-05-08 22:01:34 +00:00
cgd 8a640328ed clean up several ISA device interfaces: autoconfiguration, header
inclusion, and interrupt configuration.  more work still needs to be done,
but it's getting better...
1995-04-17 12:06:30 +00:00
jtc 71ab4ed9dc KERNEL -> _KERNEL 1995-03-28 18:13:48 +00:00
mycroft ff6c206c3f Use void* rather than caddr_t in many places. 1995-03-25 00:00:53 +00:00
brezak 83fffa3985 Cleanup for SB16 (From Jan Sparud) 1995-03-08 18:27:35 +00:00
brezak 32eec53a2d SoundBlaster driver for SB, SB16 and SBPRO 1995-02-21 02:28:06 +00:00