3e6164e173
Make a comment about what pcmcia_detach_card() should do.
1998-11-14 01:54:25 +00:00
a0c0e7eff1
fix egcs warning
1998-11-13 13:47:56 +00:00
acdd660ace
fix callback type
1998-11-13 13:45:15 +00:00
a9c167b273
prototype un-prototyped functions
1998-11-13 11:51:55 +00:00
8e893eff9e
Add braces around 'if' to pacify egcs
1998-11-13 11:48:26 +00:00
5ab6a8555e
Fix one last bug in the multicast filter calculation.
...
sdr and vic work now, at least.
1998-11-13 09:37:46 +00:00
38a3987b69
RAIDframe, version 1.1, from the Parallel Data Laboratory at
...
Carnegie Mellon University. Full RAID implementation, including
levels 0, 1, 4, 5, 6, parity logging, and a few other goodies.
Ported to NetBSD by Greg Oster.
1998-11-13 04:20:26 +00:00
d272bb0024
Handle the case where ccdbuffer() fails due to memory shortage. Build
...
a fifo of component buffers, and free them if ccdbuffer() fails. Once
all component buffers are build, run through the fifo and fire off the
requests to the components.
1998-11-13 01:00:15 +00:00
092c201932
Simplify calling of ccdbuffer() now that the mirroring code is nuked.
1998-11-13 00:35:57 +00:00
ab27c3f89c
Return EINVAL if invalid flags are passed.
1998-11-13 00:31:02 +00:00
00172c10d5
Nuke the mirroring code. RAIDframe is about to go in, and is a much
...
better mirroring solution.
The ccd driver will stay, even in the presence of RAIDframe, for applications
where just RAID-0 is needed (much smaller code footprint).
1998-11-13 00:26:19 +00:00
b6ac7c9b6b
Must use PR_NOWAIT when allocating component buffers.
1998-11-12 22:39:57 +00:00
56107b8e10
Force PCI_COMMAND_MASTER_ENABLE if DMA has been setup properly. The BIOS is
...
supposed to do it but who knows ...
1998-11-12 15:05:29 +00:00
a16b0cc7db
regen
1998-11-12 14:09:20 +00:00
0c0b302fba
-add an NE2000 clone, info from PR kern/6430
...
-add comment for PCNET/isapnp (ID is vendor specific)
1998-11-12 14:06:34 +00:00
8146c925da
If we get a TX interrupt with no packets buffered, ignore it. This can occur
...
if the chip is reset while transmitting.
XXX
This occurs at boot time because the SIOCADDMULTI always resets the interface
when adding the `all hosts groups' -- usually while the ARP packet is being
transmitted. All drivers should be fixed to not reset the interface when
changing the multicast filter, if possible.
1998-11-12 13:18:26 +00:00
b8974fbf40
Fix yet another bogon in the multicast filter calculation.
1998-11-12 13:03:51 +00:00
1e71e76d6c
- clearify the boot messages (features supported vs features used). Thanks to
...
Havard Eidnes for his complains about this :)
- fix some typo in comments
- hoppefully better detection of drives reporting bogus PIO modes.
1998-11-11 19:38:27 +00:00
1a5d2ce537
File is obsolete.
1998-11-10 05:56:31 +00:00
1b8620b9fb
Cleanup media set on Alpha. ring txpoll after setting proper tx
...
interrupt mask.
1998-11-09 23:41:14 +00:00
a1b2be7e1d
Const poisoning.
1998-11-09 23:12:48 +00:00
9f20ff377a
Make the device lookup table-driven, like if_ep_pci.c.
1998-11-09 23:12:18 +00:00
432a301fc6
Support for the CMD PCI064{3,6}. Tested on a 0646 with a
...
"wd0: PIO mode 4, DMA mode 2, UDMA mode 2" device.
1998-11-09 09:21:09 +00:00
21e1b057bc
Sorry, I forgot to revert "#if 0".
1998-11-09 07:01:47 +00:00
9d716ec821
- Fix many errors in cursor image manipulation. Hardware expect 2
...
bit/pixel format, not planer format. Assign MSB for cursor mask and
LSB for cursor image, where 10 means mask color and 11 for image color.
Image bit order of Bt431 and Bt459 are opposite to MIPS/Alpha processors
while IMS G332 and DC503 (PCC) are indentical.
- Assume that cursor images are 32 pixel padded as ULTRIX/DU ws interface
do. It's natural to X server.
- XXX Vast majority of codes are duplicated between mfb<->tfb and cfb<->sfb.
Code sharing might be achieved in the context of TGA/SFB+ merge.
1998-11-09 03:58:05 +00:00
2749e8b74a
We don't need the pci headers here.
1998-11-08 22:02:25 +00:00
d878e9efc8
Rely on priority match to resolve conflict with the ex driver, not on
...
a define.
1998-11-07 23:06:26 +00:00
f213d2f96a
use common code for extended capability (power management)
...
let "match" return 2 (> ep_pci)
1998-11-07 16:53:19 +00:00
bbe9d71415
add support for "extended capabilities" (new in PCI spec 2.2)
1998-11-07 16:47:22 +00:00
e58cf6b359
Add definitions for the ATA power management commands
1998-11-05 22:49:09 +00:00
fbed93d50d
EGCS fixes.
1998-11-05 19:48:04 +00:00
37bbf03777
fix pcic_chip_socket_enable() to works on more machines.
1998-11-05 07:55:48 +00:00
2b695df1dc
Common code for media-from-bmcr.
1998-11-05 04:08:01 +00:00
aabf2a0809
In the status routine, always use the media selected in the BMCR if
...
autonegotiation is not enabled. This is more reliable on many PHYs,
and requires fewer register reads.
1998-11-05 04:01:32 +00:00
c755434d9d
Regen.
1998-11-05 03:43:57 +00:00
84def70194
Add AMD's OUI, and the model number for the AMD 79C873 10/100 Ethernet PHY.
1998-11-05 03:43:43 +00:00
567710942c
Add a driver for "generic unknown PHYs", meant as a catch-all for
...
PHYs we don't have specific drivers for. While this will not give
optimum operation, it will allow network interface drivers to at least
function while drivers for their specific PHYs are written.
1998-11-05 00:36:48 +00:00
7d76571fd1
Tidy up the message from mii_print() somewhat.
1998-11-05 00:30:44 +00:00
2a17544c19
Place the essentially common "ticks" and "active" members into the
...
mii_softc (generic phy goo), and just switch all of the PHY drivers
(except tlphy, which really does have special stuff) to use an mii_softc
instead of a private one.
1998-11-05 00:19:32 +00:00
f66039cbce
Routines common between the Uknown PHY driver (forthcoming) and other
...
PHY drivers. This file has ukphy_status(), which is what PHY drivers
should use if media detection is done by decoding NWay.
1998-11-04 23:59:51 +00:00
ad8b66c7c8
Return a higher-priority match than 1. These are specific drivers. This
...
allows for a "generic unknown PHY" driver to be implemented.
1998-11-04 23:44:09 +00:00
51da8fc39f
Factor out the common reset code. Use the NOISOLATE flags as appropriate
...
to prevent a PHY from being isolated in the event the MAC can't deal with
this. (3Com 3c905B-TX, and Intel i82557).
1998-11-04 23:28:15 +00:00
b097394468
Factor out some common code from all the PHY drivers (autonegotiation, for
...
now.)
1998-11-04 23:07:15 +00:00
844622de9c
Define and use generic PHY read/write reg macros.
1998-11-04 22:15:40 +00:00
2d3363a6d0
regen.
1998-11-04 06:41:57 +00:00
b0e0dc2101
(manufacturer, product) = (0x149, 0x265) is used both
...
"Linksys EthernetCard" and some new versions of "D-Link DE-650".
Changed the product string as such.
1998-11-04 06:40:54 +00:00
5bf12ef4b9
Allow newer versions of D-Link DE650 cards (the manufacturer and
...
the product are valid and the same as Linksys EthernetCard's) work
with the current ne driver.
Somewhat kludgy.
1998-11-04 06:37:09 +00:00
7b10c3e7e4
Add the 'ex' driver, a DMA driver for 3Com 90x and 90xB cards. Rename
...
constants from EP_ to ELINK_ since they're now used in the ex driver as well.
1998-11-04 00:29:28 +00:00
b5ebc7dd87
Driver for Seeq 80220/80221/80223 10/100 Ethernet PHYs.
1998-11-03 23:51:29 +00:00
7fe67ebc21
Add support for the Seeq 80c24 AutoDUPLEX media interface which was nuked
...
when this driver was changed to use the MAC-independent MII code. This
"PHY" does not have a programming interface, but simply senses the duplex
mode from the link partner. Since it is not possible to read the 80c24
to determine the link type or status, we consider this to be "manual".
1998-11-03 05:47:38 +00:00
thorpej