cbcaaa3bc3
Make sure that a delay loop actually has some delay in it, and use IFF_OACTIVE
...
as appropriate.
1998-11-03 05:04:49 +00:00
49d750db09
Regen.
1998-11-03 05:02:25 +00:00
8adfcb5246
Define the model ID of the Seeq 84220 10/100 PHY.
1998-11-03 05:01:49 +00:00
19fd5d178f
3Com PHY can't be isolated, so don't allow IFM_NONE.
1998-11-03 00:18:18 +00:00
3f98e69b07
Driver for the Integrated Circuit Systems ICS1980 10/100 PHY.
1998-11-02 23:46:20 +00:00
1f074c785d
When doing a media change service request, use the media word from the
...
current ifmedia_entry, not from the user-supplied media word. The
user supplied media word may not necessarily match e.g. instance (if
the parent MAC driver is intentionally ignoring instance if its expecting
multiple PHYs with non-overlapping media, e.g. TI ThunderLAN) the media
word we are actually switching to.
Since PHY drivers use `instance' to determine if they should isolate
themselves, the ThunderLAN PHY was sometimes being incorrectly isolated
when in fact the user attempted to select that PHY (for e.g. BNC operation).
1998-11-02 22:31:36 +00:00
1cfb41e0d6
make this compile again (missing semi-colon)
1998-11-01 01:04:48 +00:00
d08eb2a32b
Add code to detect a RealTek 8019 chip, and use the media selection
...
support if present.
1998-10-31 01:44:16 +00:00
7d4ee06d3e
Use the rtl80x9 common code for media selection.
1998-10-31 00:45:48 +00:00
cd7f7eff85
Code common to RealTek 8019 and 8029 NE2000-compatible Ethernet chips.
...
Includes media selection support and support for Full-duplex.
1998-10-31 00:44:33 +00:00
fa97a53c11
Multiple inclusion protection.
1998-10-31 00:31:43 +00:00
992f2906ba
Move the RTL8029 register definitions to <dev/ic/rtl80x9reg.h>, and add
...
the registers/bits present in the RTL8019 (ISA version).
1998-10-31 00:27:41 +00:00
de14bf4f80
Manuel confirms that defaulting to AUTO is ok, to Do It.
1998-10-30 23:30:16 +00:00
ed473183ef
Define the FORMAT UNIT command, and several related structures.
1998-10-30 02:07:15 +00:00
6020153959
- Assign copyright terms.
1998-10-30 00:53:12 +00:00
074bc27605
- Add filenames for VDAC/cursor sprite hardware descriptions; bt431reg.h,
...
bt459reg.h, bt463reg.h and ims332.h as pointed by Klaus Klein.
1998-10-30 00:18:16 +00:00
e29350c92c
- Introduce MI NWSCONS drivers for TURBOchannel framebuffer option cards.
...
N.B., Digital UNIX never supports neither PMAG-AA (mfb) nor PMAG-BA (cfb)
for TC Alphas. PMAG-DV (xcfb) is Personal DECstation built in. All should
be good for console, but need much works for cursor/colormap completeness.
1998-10-29 12:24:24 +00:00
9ddbeaedbb
- match if the function just probing is disk and its interface is ATA.
...
- use product table only for the card which requires quirks or doesn't
have disk device interface tuple.
1998-10-29 09:49:51 +00:00
3f3c763b1b
Define some constants for function extension tuple of disk function.
1998-10-29 09:45:52 +00:00
634f1b5bf7
fix typo and some indentation.
1998-10-29 09:42:45 +00:00
2cb48d6c4e
Add support for macppc.
...
Very special thanks to Itsumi Tsutsui for his invaluable collaboration.
1998-10-28 20:39:45 +00:00
026fcd0ce2
RCS Id police, canonicalize multiple-inclusion protection symbol names.
1998-10-28 16:26:01 +00:00
675a2afc89
- Brooktree Bt459 135 MHz Monolithic CMOS 256x64 Color Palette RAMDAC.
...
- Brooktree Bt431 Monolithic CMOS 64x64 Pixel Cursor Generator.
- Inmos IMS G332 Color Video Controller.
1998-10-28 04:10:36 +00:00
04c995f517
Add support for media selection to the PCI front-end of the NE2000
...
driver. Currently supports:
RealTek 8029: 10base2, 10baseT, 10baseT-FDX, auto detect (but not FDX).
1998-10-28 00:15:54 +00:00
56066ad5fb
Add media list, media list count, and default media arguments to
...
ne2000_attach().
1998-10-28 00:13:47 +00:00
3a9e6f3a29
Define a "page 3", used on some chips which emulate a dp8390, but also
...
provide extensions.
1998-10-27 23:34:17 +00:00
925077cfb9
Holy smokes, batman! Actually fill in the "init_card" entry point!
1998-10-27 22:45:13 +00:00
a45667c4c3
Add register definitions for PCI NE2000-compatible extenstions, allowing
...
control over e.g. full-duplex mode, media, etc.
Currently, only extensions for the RealTek 8029 are defined.
1998-10-27 22:30:56 +00:00
e5c050d79c
Cosmetic changes in product lookup, to match other drivers.
1998-10-27 19:49:37 +00:00
2fd1cb5817
Regen.
1998-10-27 00:55:46 +00:00
64acdc1e7a
Product ID for Xircom CreditCard CE2 10base-T Ethernet.
1998-10-27 00:55:30 +00:00
3a7a7177cc
Update for changes to NCR5380_READ() and NCR5380_WRITE().
1998-10-26 04:44:04 +00:00
8ed7c47c7a
In order for the SCI_CLR_INTR() and SCI_BUSY() macros to work, we
...
must actually use the softc pointer provided. Adjust NCR5380_READ()
and NCR5380_WRITE() appropriately.
1998-10-26 04:42:47 +00:00
ffe41a4f8f
Remove unused sc_iot/sc_ioh fields.
1998-10-25 23:48:56 +00:00
d4e6677111
Replace architecture-dependent tag/handle field names with
...
architecture-independent versions.
1998-10-25 23:48:29 +00:00
fab7faf6a4
Fix typo
1998-10-25 18:49:18 +00:00
6e73d89afc
PR/6274: John Ruschmeyer: Add isa/i386 ncr53c80 driver.
...
XXX: Needs work. We need to fix the probe/find goo, and add support for the
pas16 cards.
1998-10-25 18:41:56 +00:00
906db1e920
PR/6274: John Ruschmeyer: Add support for the ncr53c80 driver on the i386.
1998-10-25 17:26:41 +00:00
86fca03a0d
Driver for the Level One LXT-970 10/100 Ethernet PHY.
1998-10-24 00:33:17 +00:00
354f32509f
Pass the rigth argument to wdcintr(). Closes PR 6342.
1998-10-23 13:58:17 +00:00
afbf922a93
Don't print the revision of the 3c905B-TX's internal PHY; it's meaningless.
1998-10-23 01:52:50 +00:00
322ba3cc84
Make sure the parent is an `ex'. The 3c905B-TX's internal PHY isn't
...
the only one w/ non-existent ID registers. SIGH.
1998-10-23 01:43:09 +00:00
b301435840
back out last change - this file in unrelated to wscons stuff
1998-10-22 18:50:17 +00:00
01d6f66b07
adapt to keyboard driver changes
1998-10-22 18:37:57 +00:00
00d699282f
separate keyboard handling from serial interface handling some more,
...
improve bell handling, initialize kbd on powerup
1998-10-22 17:55:20 +00:00
31dec5ddc5
Add config flags for pciide: 0x001 forces the use of DMA when the driver
...
don't know how to set the controller's modes.
1998-10-22 15:11:39 +00:00
f6490fe309
- General cleanups for NWSCONS zskbd.c and zsms.c Comments for
...
future improvement work.
1998-10-22 08:37:16 +00:00
b70011edac
wscons mouse interface for DEC mice off the Zilog SCC.
...
Ported from dev/sun/ms.c by Takuya Koumoto <takuya-k@is.aist-nara.ac.jp>.
1998-10-22 01:56:55 +00:00
605b15b723
Code from Toru Nishimura and Matthias Drochner work on pmax wscons in a
...
very slightly modified form for wscons support on the TC alpha.
XXX This could use some more work, but this code should be sharable
among the alpha and pmax systems as-is.
1998-10-22 00:53:24 +00:00
a8950dafc6
Updates from Takuya Kuomoto for wscons support for TC alphas.
1998-10-22 00:50:00 +00:00
88d1b8138c
If WDC_DIAGNOSTIC is defined, check in wdcstart() that we are called at
...
splbio.
1998-10-21 09:12:46 +00:00
c0ba12768e
Fix a sight open flags buglet pointed out by Matthias Scheler.
1998-10-20 22:26:04 +00:00
a2386d4325
fully implement soft callback usage
1998-10-20 22:18:13 +00:00
8aaec6d337
Fix typo.
1998-10-20 21:28:32 +00:00
1074ab2039
Make seq_input_event() static to avoid a name clash with the (commercial)
...
OSS audio LKM.
1998-10-20 21:19:22 +00:00
1456b01d77
Fix for Apollo DMA mode (not UDMA): DMA mode = PIO mode - 2, not PIO mode + 2 !
1998-10-20 18:47:45 +00:00
ce89209d42
when transmitting we cannot totally fill the circular buffer (i.e.
...
we can't use up all of the remaining sc->txslot[chan].bfree free
bytes) because that would cause the circular buffer read pointer
to become equal to the write pointer, thus signaling 'empty buffer'
to the hardware and stopping the transmitter. spotted and fixed
by Kenjiro Cho <kjc@csl.sony.co.jp>
1998-10-20 17:53:54 +00:00
794fadcf0a
Donc reset the disk state to 0 in wd.c, set a flag which will cause it
...
to be reset to 0 at wdcstart(). This fixes a race condition between
normal I/O and wdioclt().
1998-10-20 17:00:26 +00:00
7bdbb5c993
Donc reset the disk state to 0 in wd.c, set a flag which will cause it
...
to be reset to 0 at wdcstart(). This fixes a race condition between
normal I/O and wdioclt(). Also use interrupts for wd_get_params in wdopen().
1998-10-20 17:00:25 +00:00
a7c841cfbc
Donc reset the disk state to 0 in wd.c, set a flag which will cause it
...
to be reset to 0 at wdcstart(). This fixes a race condition between
normal I/O and wdioclt().
1998-10-20 17:00:24 +00:00
167e694c99
Regen.
1998-10-20 01:39:41 +00:00
1715793000
Add RealTek 8129 and 8139 10/100Mb Ethernet IDs.
1998-10-20 01:38:57 +00:00
f69c40b8be
Fix a memory leak in fxp_stop(), from the FreeBSD driver.
1998-10-19 23:51:15 +00:00
3ebe847640
Stopgap fix for stupid pasto. Fix for the BAHSOFTCOPY case will be provided
...
after more sleep.
1998-10-19 22:00:14 +00:00
f6f8ba3446
Allow uk to attach at atapibus.
1998-10-19 12:28:52 +00:00
5f723da8af
Move the "warning: bcount value is %d after io" message in a WDCDEBUG_PRINT.
...
Ifdef DIAGNOSTIC, print the above message only if bcount is < 0.
1998-10-19 12:28:03 +00:00
22acea3cb7
Fix a comment.
1998-10-19 12:26:22 +00:00
c90c4b829b
Add support for the second flavour of the VIA IDE chip (which has UDMA).
...
Don't claim DMA support if we don't have explicit support for this chip.
They're to may way to loose when trying to use DMA without configuring the
controller and disks.
1998-10-19 12:24:33 +00:00
04bdcc421c
Regen.
1998-10-19 12:13:57 +00:00
682ee5fdf3
Yet another attemp at getting the VIA tech. product name/ID's rigth.
...
It seems that different products have the same name (sigh).
1998-10-19 12:11:50 +00:00
18b6b32a67
Support for DWBUA (BI to Unibus adapter) and KLESI-B (TMSCP tape ctlr) added.
1998-10-18 18:47:18 +00:00
96a0812fd8
Kill an extra printf("\n").
1998-10-15 11:38:04 +00:00
d153ad6324
Some const poisioning.
1998-10-15 07:06:47 +00:00
859b5d88a6
Protect kernel prototypes w/ #ifdef _KERNEL.
1998-10-15 05:11:52 +00:00
2ebdceb3f7
Forward decl of struct proc.
1998-10-15 05:10:20 +00:00
ee042cb008
Disable the I/O address, DRQ and IRQ validation; assume that the config file
...
is sane.
1998-10-15 04:05:53 +00:00
d2d873481a
pcic_wait_ready(): If we didn't get READY, print out the current status.
1998-10-15 04:04:43 +00:00
6413810bf3
Stop spurious lpt messages from being printed -- approved by fvdl.
1998-10-14 20:09:06 +00:00
8f460d30f6
Nuke spurious ;
1998-10-14 18:05:45 +00:00
773dc968ad
Remove some debugging printf
1998-10-14 13:28:47 +00:00
de1d4ba9b0
Change the way uCode is loaded into board LRAM, to let it work on macppc.
1998-10-13 22:57:26 +00:00
e8322de657
Add a new drive flag, DRIVE_MODE, set when the drive properly reported its
...
PIO/DMA modes. Don't try a SET_FEATURE if it didn't report its mode.
1998-10-13 15:18:46 +00:00
7545a59b8c
In debug message, always print controller:channel:drive
1998-10-13 15:02:41 +00:00
ff0134b99f
Properly separate DEBUF_XFERS and DEBUG_FUNCS: DEBUF_XFERS is for data
...
transfers (may be called often), where DEBUG_FUNCS is for setup functions
(not used for normal contitions).
1998-10-13 09:33:59 +00:00
da5d0a6f17
pciide.c: don't define WDCDEBUG, so it compiles on alpha. Correct a bogon
...
in the printing of DMA mode (piix3/4 only)
others: set the debug_mask to 0, so that debug messages are turned off by
default but can be easily turned on.
Reset drive_flags to 0 for unconfigured devices, so that they are ignored
later. For configured devices, reset state to 0 after probe/attach.
1998-10-13 08:59:45 +00:00
39c8c94fa5
make it compile with GWETHER again.
1998-10-13 08:33:05 +00:00
dc7cfafe4c
Default to "no debugging messages" (still patchable).
1998-10-13 05:39:01 +00:00
cd7e3136ad
Use ETHERTYPE_ATALK instead of ETHERTYPE_AT. The former seems more common.
...
Our other constants also use "ATALK".
Added many new ETHERTYPE constants to sys/net/ethertypes.h, including the
ones from libpcap and tcpdump "ethertype.h" files.
1998-10-13 02:34:31 +00:00
13b8051475
Make this file compile again with -DATAPI_DEBUG_PROBE.
1998-10-13 02:09:47 +00:00
46aa11acac
Adjust include list.
1998-10-12 19:50:09 +00:00
19fddaeeb5
Merge bouyer-ide
1998-10-12 16:09:10 +00:00
2101c736a3
Make the product lookup table-driven.
1998-10-11 18:42:01 +00:00
44d4d6a60a
Call correct ad1848 attach routine. Fixes PR 6269.
1998-10-11 17:02:36 +00:00
e0fa7545bf
Use pcmcia_io_free() where appropriate.
1998-10-10 22:01:24 +00:00
09b6735d35
Define missing pcmcia_io_free().
1998-10-10 21:59:40 +00:00
f1c971ea72
Device driver for PCMCIA multi-port serial cards. Currently supports
...
the Socket Communications, Inc. dual-rs232 device.
1998-10-10 21:27:21 +00:00
f568c6347c
Fix last commit -- NISADMA is either 0 or 1.
1998-10-10 13:43:10 +00:00
fe56f257b2
If the adapter returned XS_RESET and the xfer specifies a retry count,
...
attempt to reissue the command (which was destroyed by the bus reset).
Slightly modified from PR #6090 , from Matt Jacob.
1998-10-10 03:42:53 +00:00
16cf223098
Enforce open-for-writing on ioctls that change the bus's state.
...
Implement ioctl pass-through to the host bus adapter, allowing both
SCBUS* ioctls handled at that level and host adapter-specific ioctls
to be implemented. Implement SCBUSIORESET as a pass-through.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 03:33:01 +00:00
45bf57f8a6
Garbage-collect the SCIOCREPROBE and OSCIOCREPROBE ioctls. This is a
...
bus-oriented command. (How much sense does it make to open a device
to rescan the bus?!)
1998-10-10 02:35:30 +00:00
thorpej