cfb1fd004d
Don't clobber the MXCSR when we fake FNINIT.
2001-08-03 01:21:34 +00:00
f72ee0a9c6
Remember the MXCSR at last-exception the way we do the FPU SW/TW.
2001-08-03 01:11:49 +00:00
3f5acd41c2
Remove trailing "U" on KERNBASE introduced in last commit.
...
Breaks assembly of locore.
2001-08-03 01:03:10 +00:00
6e331fdd9f
Define KERNTEXTOFF in terms of KERNBASE.
2001-08-03 00:47:59 +00:00
8f308d671e
Adapt to new FPU save format in PCB.
2001-08-03 00:41:46 +00:00
8c3ac05de9
Bump version for * command addition.
2001-08-03 00:41:12 +00:00
33452511ed
Add a single * command, *boot26, so that the module can be manually invoked
...
after it's loaded.
2001-08-03 00:40:23 +00:00
b471d90032
Add OS_Module.
2001-08-03 00:32:30 +00:00
6e82ab9796
Wrap boot26 in a minimal relocatable module. When *RMRun, it just copies the
...
existing boot26 code to 0x8000 and runs it.
2001-08-02 23:55:55 +00:00
3e749936d6
Script to generate a help string for a RISC OS module from the same sources
...
as newvers_stand.sh uses.
2001-08-02 23:47:07 +00:00
4eebbc71e2
Don't force booters to have srt0.S at the start if they don't want to.
...
Also allow them to override the filetype they end up with.
2001-08-02 23:38:04 +00:00
09c1ee004c
Fix bcopy.
2001-08-02 22:41:32 +00:00
f0449fd933
- Rename cpu_use_fxsave to i386_use_fxsave.
...
- If we detect SSE/SSE2 support in the CPU, enable SSE exceptions
and set i386_has_{sse,sse2} as appropriate.
- Expose i386_use_fxsave and i386_has_{sse,sse2} through sysctl
as machdep.{osfsxr,sse,sse2}.
2001-08-02 22:04:28 +00:00
99a7f640fe
Add support for saving/restoring SSE/SSE2 state using FXSAVE/FXRSTOR.
...
Reviewed by Frank.
2001-08-02 21:04:43 +00:00
a2ac0e50f5
Bump version number for loadfile changes.
2001-08-02 20:24:03 +00:00
9ada1599ca
implement rx/tx protocol routine of atmel microcontroller.
2001-08-02 18:51:00 +00:00
d4a7b6fc1c
Fix non-properly ifdef'ed SUN4 only code.
2001-08-02 18:06:22 +00:00
10414d85a9
Undo version bump. The sparc ofwboot doesn't use loadfile().
2001-08-02 16:22:46 +00:00
5424e08a49
Change the start address to load the kernel. We have 768k more free
...
memory now.
2001-08-02 14:45:40 +00:00
7aac1bef3b
Don't assume KERNEL_TEXT_BASE >= 0xc0080000.
2001-08-02 14:42:08 +00:00
f7c2f13a54
Properly setup timings for ata-4 controllers, including UDMA modes.
...
Tested on a brand new ("dual USB ?") ibook.
2001-08-02 12:41:39 +00:00
ad2c12a28d
Bump version numbers of all bootloaders that use loadfile/ELF, to account for
...
my changes to symbol loading. I should probably have done this at the time,
but it's better late than never.
2001-08-02 12:24:05 +00:00
ad4858224a
make this file compilable without TX39IRDEBUG.
2001-08-02 04:30:01 +00:00
afa694c704
Sync bzero w/libc version.
2001-08-02 01:47:47 +00:00
aaf3c7c88b
Hook in the mly control interface on i386.
2001-08-01 20:54:16 +00:00
4b584bf5bb
Add several more Intel cache info entries, and fetch the CFLUSH
...
line size if we have the CFLUSH insn.
2001-08-01 19:50:48 +00:00
ebbd9cd428
Add some more CPUID feature bits.
2001-08-01 18:47:38 +00:00
5cfec63f0d
Integrate fixes from userland memset.
2001-08-01 17:01:26 +00:00
faf8b4c913
Update from hpcarm with changes to probe routine and test for chip ID.
2001-08-01 14:02:58 +00:00
d9f2bbf31f
add initialization of GPDR pin direction to ipaqpcic_init(sc).
...
add judgment of complete of the Card (SAPCIC_STATUS_READY)
2001-08-01 13:18:44 +00:00
3d57cec099
Add new entry for intel ICH2 LPC interrupt router. It has
...
upper compatibility with piix.
2001-08-01 09:11:19 +00:00
1af1e2f9eb
implement a atmelgpio.c
...
this is initial version, only frame.
2001-08-01 07:59:43 +00:00
e1eef3118a
add entry of Atmel microcontroller and uda1341 codec
2001-08-01 07:03:45 +00:00
a179a1a6b1
i mistake
...
reverse a change
2001-08-01 07:02:54 +00:00
1b56a92cf9
add entry of Atmel microcontroller and uda1341 codec
2001-08-01 06:59:17 +00:00
4c5c9a1509
add register of GPCLK/UART1 (SACOM1_BASE)
2001-08-01 06:43:50 +00:00
286cc764db
add more register of DUAL PCMCIA SLEEVE for iPAQ
2001-08-01 06:14:31 +00:00
98cdfa790c
fix typo for previous in I386_CPU case
2001-07-31 22:52:44 +00:00
1af74c304d
iPAQ uses Atmel microcontroller to service a few peripheral devices
...
(Touch panel, Battery status, button events, and others status)
2001-07-31 21:33:03 +00:00
c43f8649d2
Set up function pointers for copyin/copyout in preparation for
...
adding optimized versions for various CPU classes/models.
Split the 386 version of copyout into a separate routine, and
add a 486 version that doesn't have the class/page-writeability
check.
2001-07-31 18:28:58 +00:00
03b77c0534
Add a CPU_XSCALE defopt (for eventual support).
2001-07-31 17:00:24 +00:00
2b7d2123cd
Make console polling (cnpollc/cngetc) work on IBM PS/2 keyboard controller
...
using level triggered interrupts, which livelocks calling intr routine
if the data register is not read in the interrupt routine, as it's case
when polling after interrupts are enabled during boot.
Block all interrupts when polling for keypress, and modify intr routine
to read and store value from data register. The latter one is to avoid
losing a keypress when one would manage to press a key when kernel is
not in spl-guarded code section.
Tested with classic pccons, 'pcconskbd at pckbc' and 'pckbd at pckbc'
configurations, on i386.
2001-07-31 13:15:28 +00:00
5bacff5834
Code cleanup and optimization.
2001-07-31 06:58:09 +00:00
830be13fa2
Dump some enums that make lint unhappy and we never really use anyway.
2001-07-31 06:55:46 +00:00
fb5f7652b6
fix think-o in pmap_kenter_pa().
2001-07-31 05:29:24 +00:00
0d8e804191
fix typo in previous.
2001-07-31 02:17:27 +00:00
2d5bc65e0b
enable KERNFS, it's used by installation
2001-07-30 21:50:48 +00:00
6e0195e742
Make the set_page_cacheable/set_page_cacheinhibit functions do the
...
right thing on 68030 again.
2001-07-30 21:32:49 +00:00
da3836f00d
Flush the caches in pmap_remove_mapping() when PRM_CFLUSH is specified.
...
Also, flush the ATC for the page in pmap_kenter_pa() after setting up the
mapping. With any luck this last one might just solve the 060 problems I've
been seeing...
2001-07-30 21:25:08 +00:00
b0f8b119a2
fix comment
2001-07-30 20:51:29 +00:00
3b1828355b
Add a driver for Mylex AcceleRAID and eXtremeRAID controllers with v6
...
firmware. Based off the FreeBSD driver, and re-worked by tls, erh and I.
2001-07-30 19:59:04 +00:00
b0178f25e3
Move GENERIC_PS2 to GENERIC_PS2TINY, update comments to reflect this config is
...
intended for small memory machines.
Update INSTALL_PS2 appropriately.
2001-07-30 18:24:07 +00:00
3531778254
add MCA stuff, for IBM PS/2
2001-07-30 18:03:54 +00:00
1dcdcbf286
The memmap structure contains the memory bitmap returned by the PROM
...
getbitmap() call.
2001-07-30 17:05:51 +00:00
6b65fea380
Remove unused hpc includes.
2001-07-30 16:23:09 +00:00
9013c85405
Update from hpcarm to remove iPAQ egpio code.
2001-07-30 16:20:06 +00:00
51bc7258f8
Update from hpcarm with MCP base definition.
2001-07-30 16:08:42 +00:00
c79059dd3f
Update from hpcarm to remove iPAQ and Jornada specific #defines.
2001-07-30 15:58:56 +00:00
b85ae98e65
Update from hpcarm with MCP register definition.
2001-07-30 12:19:04 +00:00
495d108bd3
Update from hpcarm with cookie change.
2001-07-30 10:55:49 +00:00
9b65c24aa5
Remove unused LCD definitions.
2001-07-30 10:50:59 +00:00
1304d2220e
Mirror removal from hpcarm.
2001-07-30 10:48:31 +00:00
499d1068e8
Update from hpcarm.
2001-07-30 10:46:08 +00:00
e35b542831
Mirror removal from hpcarm.
2001-07-30 10:33:59 +00:00
730b1a57ac
Copy from hpcarm.
2001-07-30 10:17:21 +00:00
75b9f41751
adjust the hack to build the SRT*.o files.
2001-07-30 00:10:20 +00:00
690a630673
increase the memory disk size, it needs to be bigger with ELF.
2001-07-30 00:09:08 +00:00
29f6bd03da
use pmap_k* for buffer cache pages.
2001-07-29 23:56:33 +00:00
5ad381c2a0
use pmap_k* in pagemove().
2001-07-29 23:51:40 +00:00
b92cbe7184
now that we know what the traps mean, print their name in debug mode.
2001-07-29 19:31:41 +00:00
9221ef3b13
Make hpcarm kernel build after arm/arm32 file move.
2001-07-29 15:21:33 +00:00
fa4e4d9668
Rework the pmap_release code to not have to walk the ptpt, it now uses a uvm_object to track the allocated vm_pages, this means it can free off the entries in the uvm_object.
...
Testing shows that it's about 5% faster on the make configure step for gmake.
2001-07-29 12:45:27 +00:00
89415a32e2
PR 13581
...
Add empty pmap.h and vmparam.h to make userland happier.
2001-07-29 09:50:07 +00:00
af16732a3a
Fix for PR 13580.
...
Make sysarch include sys/stdint.h so it picks up the a definition of uintptr_t.
2001-07-29 08:37:56 +00:00
691dacb39a
This is needed anymore and should have been removed a while ago.
2001-07-29 00:35:41 +00:00
ed87139e40
Remove opt_footbridge from conf.c
...
Use dev/ic/i8253reg.h instead of private timerreg.h
2001-07-29 00:34:44 +00:00
1ede42fe57
Add <machine/sysarch.h> to go with sysarch().
2001-07-28 19:14:00 +00:00
c5ae075e50
Add a very simple sysarch() implementation so that libarm32 will work.
...
This should go when arm26 uses cpufunc like everyone else.
2001-07-28 19:12:50 +00:00
9f04d8d670
A couple of tidy ups to pmap:
...
pmap_t -> struct pmap * in pmap.c and pmap.h
kernel_pmap -> pmap_kernel() everywhere.
Compiled and booted on riscpc and cats.
2001-07-28 18:12:43 +00:00
e2de9310c3
fix pmap_extract() to handle unmapped kernel addresses.
2001-07-28 17:18:59 +00:00
17ecd4e41a
Update Makefile.arm32 for the newly moved locore.S and genassym.cf
2001-07-28 15:50:40 +00:00
4a126d9937
finish moving common arm32 bits out into arm/arm32.
2001-07-28 15:08:10 +00:00
0847de74d2
Add copyright notices. Use MEMC_PHYS_BASE rather than 0x02000000.
2001-07-28 13:49:25 +00:00
ddf906b00d
Use ld -N (OMAGIC), since this saves the 32k of RAM (by not putting a gap
...
between text and data) and means that loadfile only needs one backward seek
to load the file rather than two (which is important for gzipped kernels).
2001-07-28 13:48:32 +00:00
27f96e8440
Move the generic arm32 files into arm/arm32 from arm32/arm32, tested kernel builds on cats and riscpc.
2001-07-28 13:28:03 +00:00
9c823196e0
Change -x into -X for linking, it makes traces more meaningful.
2001-07-28 13:24:24 +00:00
6be7c15373
bcopy -> memcpy
2001-07-28 13:21:26 +00:00
88fbdda31f
bcopy -> memcpy
2001-07-28 13:08:34 +00:00
f3b9fa04ed
Only declare kernel objects ifdef _KERNEL.
2001-07-28 12:53:06 +00:00
ec79dd3942
Add installation glue.
2001-07-28 12:44:54 +00:00
37dc65af43
bzero->memset
2001-07-28 12:29:58 +00:00
338f184d45
Fixup stray interrupt handler's return address.
2001-07-28 12:28:56 +00:00
0481f078a0
bzero -> memset
2001-07-28 11:17:15 +00:00
d750508a87
Hook the error interrupt only once, otherwise we'd fail when hooking
...
the interrupt for the 2nd DRAM board where two boards are present.
2001-07-28 08:30:23 +00:00
218b61dcd1
Change clock_t and time_t to more LP64 friendly types.
2001-07-28 07:43:07 +00:00
36dc943f75
Change ARM-ELF to LP64 friendly types.
2001-07-28 07:42:28 +00:00
f47c5bbd3d
Under ELF, change clock_t and time_t to int's (more LP64 friendly).
2001-07-28 05:04:45 +00:00
9139a37393
New arm26 bootloader. Mostly a translation of BBBB into C, using libsa so
...
we get goodies like gzipped kernels for free.
2001-07-27 23:13:49 +00:00
0ad24007df
Add assorted stuff that we need in order to shut RISC OS down cleanly.
2001-07-27 23:09:15 +00:00
27ae3aab7c
Blah, yet another nit: s/irq/ipl/
2001-07-27 21:56:10 +00:00
ea00e7cda2
Don't bother trying to initiate a DRAM scrub on startup as it requires
...
frobbing with registers which are marked as "For Test Purposes [only]".
2001-07-27 21:54:07 +00:00
d8372315a2
Rudimentary OS_Byte support, and an extra VDU variable.
2001-07-27 21:10:04 +00:00
d939fd1e55
Add support for OS_ReadVduVariables, with #defines for the variables that BBBB
...
uses.
2001-07-27 20:49:09 +00:00
c184f03348
Remove Mistakenly Left In comments around some `#ifdef DIAGNOSTIC' tests.
2001-07-27 20:48:58 +00:00
a24c2adedf
Limit the heap so as to allow 4 KB of stack, which should be enough for most
...
purposes.
2001-07-27 20:48:20 +00:00
8343a1492f
Forgot to shift the DRAM Bank identifiers by four.
2001-07-27 20:33:35 +00:00
f169034d7f
Fix a braino in the check for a jumper across pins 1-2 of J1 (mvme1[67]7).
...
Spotted by Chuck Silvers.
2001-07-27 18:58:23 +00:00
9ac6178585
memc attaches at mainbus now.
2001-07-27 18:40:27 +00:00
7e2f2acb8e
Flesh out the memory controller driver (at least for the MCECC chip)
...
and attach it at mainbus since it depends both PCCChip2 and VMEChip2
(or the VMEChip2 interrupter) starting first.
We can finally enable, detect and log DRAM ECC errors.
(The PROM disabled ECC checks by default)
2001-07-27 18:38:54 +00:00
f5abeb5b4b
Set MAXPHYS to 64k instead of 63k.
2001-07-27 12:58:21 +00:00
39a7595b28
Calculation of unibus map register size was wrong.
2001-07-27 12:57:20 +00:00
ea2ae3689c
Twiddle.
2001-07-27 01:03:34 +00:00
f68048b4eb
Fix bug in xosgbpb_read: Check the correct register when deciding whether to
...
store result.
2001-07-27 01:02:44 +00:00
5080e94490
OS_Args only really has two cases (reading and setting values). Use a generic
...
assembler veneer for each of these, and implement the calls to read and set
specific values as macros.
2001-07-27 00:37:38 +00:00
0fb6b9a8f8
Rework the interrupt code, shaving some cycles off in the process.
...
Rather than an "iointr" routine that decomposes a vector into an
IRQ, we maintain a vector table directly, hooking up each "iointr"
routine at the correct vector. This also allows us to hook device
interrupts up to specific vectors (c.f. Jensen).
We can shave even more cycles off, here, and I will, but it requires
some changes to the alpha_shared_intr stuff.
2001-07-27 00:25:18 +00:00
2256fe3c2a
Clear the BSS at startup, since objdump --outputformat=binary seems not to
...
output the BSS.
2001-07-27 00:21:18 +00:00
218ce892b1
Fix up a left-over SWINE in os_writec.
2001-07-27 00:00:25 +00:00
79b57114c9
auxilary -> auxiliary
2001-07-26 23:07:57 +00:00
e11d04474c
issueing -> issuing
2001-07-26 22:55:12 +00:00
035b63a542
auxilliary -> auxiliary
2001-07-26 22:53:13 +00:00
41df6b74a9
partiton -> partition
2001-07-26 22:47:34 +00:00
7a181053ec
Makefile for building standalone programs to run under RISC OS.
...
Not used yet, but it will be.
2001-07-26 22:16:26 +00:00
9315195522
Simple library to interface stand-alone programs to RISC OS.
...
This comes in two parts: riscoscalls.[Sh] provide definitions, and thin
wrappers around RISC OS SWIs (in the style of OsLib) for the use of both the
rest of the library and client code. The rest of the library provides a
compatibility layer for libsa.
2001-07-26 22:11:08 +00:00
ab94842af6
Add rnd entropy gathering.
2001-07-26 21:31:45 +00:00
d2ef97080c
make sure clockframe is __packed
2001-07-26 15:46:58 +00:00
b841a8e7cc
pmap_changebit() requires pv tracking, so replace it by manual PTE construction
2001-07-26 15:45:51 +00:00
688026c828
use pmap_kenter/remove in pagemove() to make it work with memory mapped
...
by pmap_kenter_pa() (ie buffer pages)
2001-07-26 15:43:39 +00:00
2286fed799
incorporate patch from Chuck Silvers which basically reduces
...
pmap_kenter_pa() / pmap_kremove() to the basics - ie, removes pv tracking
2001-07-26 15:41:14 +00:00
30b2bf87ed
Various typos in comments (neccessary, sceme, choise, ...).
2001-07-26 15:05:07 +00:00
8ab2c794fd
Make this compile w/o -DMIPS3.
2001-07-26 11:46:44 +00:00
071e4602d9
Avoid panic when polling is used.
2001-07-26 11:44:06 +00:00
1b3871ef0f
Change description of handler-ID == 195.
2001-07-26 11:36:40 +00:00
bacce8fb4c
Fix a warning when compiled w/o DDB.
2001-07-26 11:23:37 +00:00
6ec544c64d
implement pmap_k{enter_pa,remove}() correctly.
...
other misc cleanup.
patch written by chs; equivalent to hp300 pmap.c:1.95.
2001-07-26 02:21:58 +00:00
21bcee4ec1
Return() if piomode == -1 (i.e. we have no drives), avoid reading an array with
...
a negative offset.
Thanks to Andrew Cagney for pointing this out.
2001-07-25 20:26:33 +00:00
9d5b24f779
Apply pmap_k{enter_pa,remove} patches provided by Chuck Silvers.
2001-07-25 15:59:48 +00:00
6fa8cc9467
Sync with hp300/vm_machdep.c rev 1.60:
...
> use pmap_k* for pagemove().
> call pmap_remove() explicitly in vunmapbuf() in preparation for
> upcoming UVM changes.
2001-07-25 15:56:30 +00:00
5db9f9aa7c
Cosmetics. (some KNF, typo etc.)
2001-07-25 15:48:09 +00:00
23204e4b5f
document 3c90xb support
...
use default settings which make more sense (for me)
2001-07-25 12:51:44 +00:00
a3cdd518ad
make it compile after i82557reg.h changes
2001-07-25 12:47:34 +00:00
16d48eec82
These programs are for the host, not for the target, to execute.
2001-07-25 12:32:48 +00:00
7950c7dffd
Don't match ebus nodes not called "ebus" like the ones on hme cards.
2001-07-25 03:49:54 +00:00
e9ad38e77d
Fix bug in mips3_proc_trampoline: SR wasn't disabled on entry, allowing an
...
interrupt to sneak in after EXL had been set; the interrupt EPC was stale
as PC isn't saved if EXL is set, causing the eret to return to the wrong
place and leading to kernel-mode TLB misses on user addresses. The bug
was discovered by the japanese NetBSD/*mips folks and the same fix was
found independently by shinohara-san (shin@netbsd.org ).
2001-07-24 23:13:33 +00:00
d2cede024b
Replace some memcpy()s with probably overlapping arguments with memmove()s.
2001-07-24 22:29:07 +00:00
57b56da169
Garbage collect.
2001-07-24 19:32:11 +00:00
f13bad30d7
Use OF routines instead of internal ones.
2001-07-24 19:30:14 +00:00
24a5c4be70
Support for pc-style `rtc' real-time clocks.
...
Doesn't work right. There are still issues w/register accesses.
2001-07-24 19:29:25 +00:00
64a9c222c0
Use OF_getprop instead of getprop.
2001-07-24 19:27:10 +00:00
0aa5d1cdfb
s/accellerate/accelerate/
2001-07-24 16:50:41 +00:00
e4258b142d
Remove sn_dma_init() for the old Sonic driver.
2001-07-24 16:26:53 +00:00
a25d2e82ff
Update this.
2001-07-23 21:06:37 +00:00
000f85917b
Since ~all pckbc_poll_data1() callers had the appropriate pckbc
...
tag handy and we are going to need more of it in pckbc_poll_data1() soon,
change pckbc_poll_data1() to accept it as first arg. iot, ioh_d, ioh_c are
no longer passed separately. Use fabricated pckbc tag for calls from
arch/arc/jazz/pckbc_jazzio.c and dev/isa/pckbc_isa.c.
2001-07-23 21:03:19 +00:00
5b69ac0a44
Apply pmap_k{enter_pa,remove} patches provided by Chuck Silvers.
2001-07-23 20:34:00 +00:00
cc6781a464
Get rid of a bunch of obsolete files.
2001-07-23 18:21:26 +00:00
f53d7d33ec
Get rid of some debug code that really isn't all that useful any more.
2001-07-23 17:19:56 +00:00
384a403ca5
Make sync_icache_args use more standard types.
2001-07-23 17:04:27 +00:00
8a34464ff6
Remove old homegrown sonic driver since now we have switched to
...
the MI one.
2001-07-23 16:40:32 +00:00
2a2e37ec6c
Switch to the MI SONIC driver.
...
XXX Device declaration for the MI SONIC should be moved into sys/conf/files
XXX after all other ports switch to it from their own drivers.
2001-07-23 16:36:37 +00:00
a555b32a7f
Fix bootpath checks on machines with simbas.
2001-07-23 03:45:38 +00:00
71aa31a75a
support multiple batteries (currently only # of batteris is visible -
...
need to tweak ioctl API more). PR 10545.
2001-07-22 16:05:17 +00:00
c95a92f84f
bcopy -> memcpy, bzero -> memset
2001-07-22 15:51:16 +00:00
20ab98b30f
bcopy -> memcpy
2001-07-22 15:48:11 +00:00
8eaf0a103e
bcopy -> memcpy, bzero -> memset
2001-07-22 15:46:41 +00:00
9654501023
bcopy -> memmove, bzero -> memset, bcmp -> memcmp
2001-07-22 15:26:47 +00:00
6c8f415983
bzero -> memset
2001-07-22 15:23:53 +00:00
684d06bac8
bcopy -> memcpy, bzero -> memset
2001-07-22 15:17:30 +00:00
ef8d715888
bzero -> memset
2001-07-22 15:11:01 +00:00
2f10ae1421
bcopy -> memcpy, bzero -> memset
2001-07-22 14:58:20 +00:00
fda9343e10
bcopy -> memmove
2001-07-22 14:57:50 +00:00
3ed1e031ab
bcopy -> memcpy, bzero -> memset
2001-07-22 14:43:14 +00:00
a73374d9c8
bcopy -> memcpy, bcmp -> memcmp, bzero -> memset
2001-07-22 14:34:36 +00:00
c29fb7279b
bcopy -> memmove
2001-07-22 14:32:16 +00:00
f9493fa115
Make this compile again.
2001-07-22 14:20:13 +00:00
c4d9b998af
ptest_addr() is prototyped (in pmap.c) to return a u_long not a pointer.
...
Therefore the return value should be in %d0, not %a0.
2001-07-22 14:11:05 +00:00
f38345c6d9
bcopy -> memcpy
2001-07-22 14:09:04 +00:00
a9356936b4
seperate -> separate
2001-07-22 13:33:58 +00:00
611461bc5e
memcpy -> memmove. Noted by Tsubai Masanari.
2001-07-22 13:21:04 +00:00
0ef3731e14
Replace memcpy's of obviously overlapping regions with memmove.
...
Noted by Izumi Tsutsui.
2001-07-22 13:08:09 +00:00
c5a6be17f4
bcopy -> memcpy, bzero -> memset, bcmp -> memcmp.
...
Reviewed by Matt Thomas, ok'd by Tsubai Masanari.
2001-07-22 11:29:44 +00:00
c84f4a5476
adhoc battery event creation for some vr machines.
...
XXX: temporary
this file is needed with vrpiu.c rev1.14
2001-07-22 10:40:09 +00:00
64b6b76a21
You must set 'HPCFB_SWAP_*' if bytes are stored in reverse order, i.e.
...
little endian like order, however, usage of 'HPCFB_SWAP_*' was widely
misunderstood because it reminded you of 'RI_BSWAP' in raster operation.
Please note that 'RI_BSWAP' indicate that frame buffer byte order is different
from natural order of system while 'HPCFB_REVORDER_*' is independent of
system byte order.
2001-07-22 09:56:39 +00:00
044d2dfafc
Move former PS2 config to GENERIC_PS2, mostly so that it fits the
...
installation snapshot build machinery well; also improve some comments.
Adjust INSTALL_PS2 config accordingly.
2001-07-21 16:26:46 +00:00
c55c49e5e3
Make a bit more like GENERIC - add I586_CPU, NTP, SYSVMSG, SYSVSEM, LKM,
...
CD9660, INET6, though bunch of entries enabled in GENERIC is commented out,
mostly due they being not appropriate for IBM PS/2.
2001-07-21 16:12:16 +00:00
c013461507
add pcmb\*
2001-07-21 13:22:05 +00:00
230adf61d8
Installation kernel for PS/2 machines. Only wrapper around
...
PS2 config.
2001-07-21 13:16:23 +00:00
0be60fb28d
remove MEMORY_DISK_HOOKS stuff
2001-07-21 13:15:00 +00:00
025f122394
use definition of memory size for physical area
...
0x20000000 -> SH3_P1234SEG_SIZE
2001-07-20 14:19:59 +00:00
7ef32026cd
make slash, backslash, question, and pipe (bar?) keys work on US Jornada
...
keyboard.
We still don't have {}[]`~ since these require the 'fn' key modifier. Same
with num-lock, caps-lock or funky british currency symbols.
2001-07-20 04:28:50 +00:00
1fead733d9
PCI overhaul.
2001-07-20 00:07:12 +00:00
93d4ebfb55
Don't fall over if the TOD clock could not be found.
2001-07-19 23:59:51 +00:00
7e8421fa5b
Also attach apropriate devices named "serial".
2001-07-19 23:55:50 +00:00
0c4549ab71
Don't bother flushing cache lines for un-cached accesses.
2001-07-19 23:47:37 +00:00
b3edeb5745
Add 'ide' to the IPL table and fix things so we don't rely on the PROM
...
mapping things in for us.
2001-07-19 23:40:36 +00:00
76665dc463
Small code cleanup.
2001-07-19 23:38:11 +00:00
5150b485b4
Do ignore unregistered interrupts instead of faulting.
2001-07-19 23:37:17 +00:00
12fbdb7bb3
Make bus_space_debug default to off.
2001-07-19 23:35:42 +00:00
075ed881ad
Print out PID and command name for alignment faults.
2001-07-19 23:33:09 +00:00
a60e790efe
Make a bigger hole between kernel text and data.
2001-07-19 23:31:06 +00:00
030941bc0d
Only match the "gbus" on the primary CPU's CPU module.
2001-07-19 20:34:08 +00:00
13e63c6a43
Take a guess and initialize the prefetch threshold to 256 bytes. Haven't
...
found this one in the manual yet.
2001-07-19 19:09:22 +00:00
thorpej