2a79087848
Put in some #ifdef's to compile only for MV2000.
1997-03-15 16:14:23 +00:00
285002ead6
Cleanup. Prepare for getting memory size from boot (VMB).
1997-03-15 16:11:25 +00:00
0044b4ccf0
Add a forgotten #ifdef. Remove debug printout.
1997-03-15 16:07:17 +00:00
1d90a0a507
Add definitions for DEC HW device numbers.
1997-03-15 15:09:40 +00:00
b5b674f227
Do not use inline functions in boot blocks. Some CPUs doesn't have
...
all instructions.
1997-03-15 15:08:23 +00:00
8fa1cdb04b
Add routines for network handling and standalone le driver.
...
To make this work nice, big changes to the boot unit handling
was also required. From now only DEC HW unit numbering are used
in boot, to easy match boot device in kernel.
1997-03-15 13:04:22 +00:00
3d16e320d6
Move physaccess/physunaccess prototypes.
1997-03-15 05:39:45 +00:00
54bec78722
Update the 'status' paragraph to reflect the current working programs.
1997-03-15 03:41:01 +00:00
4f210d58be
patch from Matt Jacob to enable secondary PCI bus support
1997-03-15 03:15:20 +00:00
0918e34d85
After opening the disk device to force a disklabel read, it should really
...
be closed rather than opened again.
1997-03-15 02:59:43 +00:00
4b697aa304
add emul.c
1997-03-15 02:36:00 +00:00
92796a6d43
Add a mountroothook that prompts the operator to insert a file system
...
floppy, a'la the SPARC port.
1997-03-15 01:34:10 +00:00
358f6940ee
- fix return value in case we failed to write to the destination register.
...
- pretty-print registers.
1997-03-15 00:39:51 +00:00
2c62945461
- move instruction emulation and alignment fixing to emul.c
...
- add sparc-v8 {s,u}{mul,div}{cc,} instruction emulation
1997-03-14 23:57:58 +00:00
d9d8878ed1
Asi instruction struct was missing the immediate bit!
1997-03-14 23:54:07 +00:00
f868dff8d3
Define the `cleankernel' target consistently with other ports.
1997-03-14 23:27:29 +00:00
cbbcf185ae
Put the genassym.sh output in a temp file, and mv -f it, in case
...
it fails spectacularly and doesn't clean up.
1997-03-14 23:23:45 +00:00
44149b42c2
Put the genassym.sh output in a temp file, and mv -f it, in case
...
it fails spectacularly and doesn't clean up.
1997-03-14 23:21:36 +00:00
d0c586a17f
Put the genassym.sh output in a temp file, and mv -f it, in case
...
it fails spectacularly and doesn't clean up. Also, remove dependencies for
genassym.o (since it no longer exists).
1997-03-14 23:16:08 +00:00
f7ad6fff40
Put the genassym.sh output in a temp file, and mv -f it, in case
...
it fails spectacularly and doesn't clean up. Also, don't depend genassym.c
(since it no longer exists), and remove dependencies for genassym.o (since it
no longer exists).
1997-03-14 23:14:39 +00:00
40b1a6f68b
No longer need to define SUN_BOOTPARAMS
1997-03-14 21:28:38 +00:00
ca5f101ba7
Remove code that stops transfers of >63K. The Sun 4 doesn't have this
...
limitation, and minphys() is supposed to catch this on other architectures.
1997-03-14 19:57:20 +00:00
76c1d7a5b5
We don't even need to clear the BSS here; it's been done by the boot
...
program for a Long Time, and doing it (correctly :-) here means that
we wipe out, among other things, boothowto. (oops!)
1997-03-14 19:50:06 +00:00
8a5abffaf5
Add some instrumentation to keep track of PMEG allocation.
...
Enabled #if DIAGNOSTIC.
1997-03-14 14:28:45 +00:00
a276c4ee15
- Some cosmetic changes to whitespace
...
- make the command parser table-driven
1997-03-14 06:56:27 +00:00
6ed34bacd9
Purely cosmetic whitespace changes.
1997-03-14 06:55:07 +00:00
e96f48563b
Add netboot.bin to CLEANFILES.
1997-03-14 05:07:27 +00:00
63a75dcdcf
Make this work with obj* dirs.
1997-03-14 04:59:34 +00:00
3a99046fbb
Update this to new config.
1997-03-14 04:21:13 +00:00
627952867a
Ressurect (not quite, since this is in fact the new boot code Makefile
...
now).
1997-03-14 02:54:14 +00:00
816bb96145
Initial import of new boot code, created by Matthias Drochner with a
...
little hacking by me. This isn't strictly identical to his 920312
release -- I've hacked it a bit -- but since we are taking over change
control it doesn't matter much.
1997-03-14 02:40:32 +00:00
2eb5a59f71
Initial import of new boot code, created by Matthias Drochner with a
...
little hacking by me. This isn't strictly identical to his 920312
release -- I've hacked it a bit -- but since we are taking over change
control it doesn't matter much.
1997-03-14 02:40:29 +00:00
80bf6049dd
fix from Matt Jacob: configuration accesses need PCI Byte enables just
...
like sparse memory accesses do.
1997-03-13 23:59:36 +00:00
2f598d011a
Sync with sun3 (Trap 1,2,15 handlers)
1997-03-13 20:46:37 +00:00
0fefd47a64
Use arch/m68k/m68k/sig_machdep.c
1997-03-13 20:30:19 +00:00
5c553cfd2f
Factor out sendsig() and sys_sigreturn() from $arch/machdep.c
1997-03-13 19:14:35 +00:00
de65671490
Ported to the sun3x by Jeremy
1997-03-13 17:52:44 +00:00
ee531cb3c9
s/sun3x_/_/ in sun3x_(round|trunc)_(page|seg) macros
1997-03-13 17:40:33 +00:00
711486fd1b
Fix a typo (oops).
1997-03-13 17:14:45 +00:00
24120736d8
Import the sun3 version of this on the "vendor branch".
1997-03-13 16:27:27 +00:00
f3952a7326
No longer need to override DEFS
1997-03-13 16:19:01 +00:00
032d13fc7d
s/sun3_/_/ in sun3_(round|trunc)_(page|seg) macros
1997-03-13 15:58:49 +00:00
e4a48696a6
Add member to bitmap struct that gives the size of mappable memory.
1997-03-13 12:37:08 +00:00
d8319f5c75
remove leftover from switch to the mi kgdb interface.
1997-03-13 10:25:25 +00:00
c6d2740564
Integrate Phil Budne's latest changes to the scn driver. From his README:
...
* Uses Counter/Timer dynamicly for rate generation; You can
have both 19200 and 38400 on one duart, and 57600 on another!
* Improved scninfo program to dump driver internal information.
implemented counters for parity err, framing err, break
* Delays changes until transmitter idle to avoid "glitches"
* Cleaned up scn_softc member names
* Untested support for sc26c92 (I don't yet have any to test with);
+ Will use alternate rate tables (include 115.2kbps and 230.4kbps)
+ Will raise FIFO rx interrupt threshold and watchdog timer
at higher rates.
+ Unknown (to me) how fast pc532 MC145406 driver chips can go
NOTE: It seems like it may be a BAD idea to use a sc26c92 as
a console port for now; the PROM doesn't know to reset the
chip back to scn2692 mode!!
1997-03-13 10:24:14 +00:00
8229701876
oops, don't need trap.h here anymore
1997-03-13 09:29:03 +00:00
72ba35e689
Don't genassym the trap type values; just include <machine/trap.h>
1997-03-13 09:27:21 +00:00
deeac396e7
Use genassym.sh to facilitate cross compiling.
1997-03-13 09:24:21 +00:00
f6d3f6c93b
Use the script version to facilitate cross compiling.
1997-03-13 09:22:19 +00:00
4913ba5369
V_SWTCH is no longer needed.
1997-03-13 04:37:20 +00:00
2f18f33d16
Use genassym.cf, to support cross-compiling.
1997-03-13 04:22:05 +00:00
a15ede807a
add entries for isp, as isp* at pci? dev ? function ?, for Qlogic ISP 10x0
...
PCI SCSI controllers. Also, add the attached SCSI busses.
1997-03-13 04:15:24 +00:00
e36a5ca4de
change microcode array definitions from "unsigned short" to the more
...
correct u_int16_t, and remove bogus casts that the old definition
required.
1997-03-13 04:07:44 +00:00
919efaeb60
Make the microcode table const.
1997-03-13 03:33:03 +00:00
ac3b8b13b7
Don't share the silence block between devices. Make silence filling work for
...
more encodings, and make it device-independent. From Lennart Augustsson, in
PR kern/3305.
1997-03-13 02:19:32 +00:00
85068c2512
add ahc and bha at EISA
1997-03-13 01:15:52 +00:00
96153388c0
add in the 'isp' device, for Qlogic ISP 1020-based Sbus SCSI board support
1997-03-13 00:46:13 +00:00
13a313fd8d
add entries for ahc and bha PCI devices. clean up some
1997-03-13 00:43:37 +00:00
9ceaaf3e7b
Turn off "cache pagetables bit" on non-MXCC modules.
1997-03-12 22:52:19 +00:00
b8d7e3deab
No longer needed.
1997-03-12 22:40:07 +00:00
2330e40bc9
enable Matt Jacob's ISP 10x0 driver, now that it's in the source tree.
1997-03-12 21:50:15 +00:00
8c689e6477
Copyright notice consistency, per Matthew Jacob.
1997-03-12 21:09:43 +00:00
cf26d31ad2
NetBSD RCS ID tweaks, a few comment block tweaks. Also, make copyright
...
notices consistent (per Matt Jacob).
1997-03-12 21:06:41 +00:00
099e30a322
ISP 10x0 driver from Matthew Jacob of NASA Ames Research Center.
...
(March 12, 1997 version).
1997-03-12 20:44:50 +00:00
7fb73fe0b2
Fix error in computation of BSS size when clearing it.
1997-03-12 19:49:11 +00:00
2bbaeef8cc
Fast and dirty fix to avoid panics during autoconf of KFQSA DSSI disks.
...
Controller errors showing up can't be handled anyway.
1997-03-12 19:42:30 +00:00
0daaaa0fc2
add kn8ae CPU support to GENERIC kernels. Also, add kn8ae devices.
...
Add "isp", "ahc", and "bha" config lines, but comment them out until
their sources are in the tree and/or their alpha patches are in the tree.
1997-03-12 19:29:14 +00:00
ffba332bb5
AlphaServer 8200 & 8400 support, including CPU specific details, TurboLaser
...
system bus support, and KFTxx support. From Matthew Jacob, NASA Ames
Research Center.
1997-03-12 19:19:54 +00:00
265be6d839
enabled SQWE as well as PIE in reg B.
1997-03-12 19:13:20 +00:00
a92ec8002e
Enable COMPAT_M68K4K.
1997-03-12 18:33:09 +00:00
8e4a126035
Use `mcxx' from cpuinfo instead of re-consulting the MMU registers
1997-03-12 15:44:28 +00:00
0d71b22d50
Use genassym.cf
1997-03-12 15:17:13 +00:00
3e35754576
Added genassym.cf
1997-03-12 15:16:35 +00:00
6e3c9f3b59
Make sure to disable interrupts in the Interrupt Enable register as soon
...
as we've mapped it.
1997-03-12 11:04:35 +00:00
b197276005
Correct output from cpumatch_unknown() and add missing viking variant
...
to cpu table (noticed by Andrew Gillham).
1997-03-12 09:08:29 +00:00
a0d3809966
specs for ISP 10x0 (isp) driver Sbus attachment. From Matt Jacob.
1997-03-12 06:43:25 +00:00
28152db63a
don't assume that CPU ID is same as device unit number (DUH!), add some
...
comments about future work to be done. make a mostly-extraneous set of
printfs (cpu capabilities) become #ifdef DEBUG.
1997-03-12 05:50:00 +00:00
245b65b853
pass CPU ID info down to cpu when attaching (duh!)
1997-03-12 05:47:37 +00:00
0a500fffa0
update to allow PCI bus interfaces that wish to allocate static
...
extent storage per interface unit (e.g. dwlpx, where there can be multiple
units per machine) to do so. Inspired by discussion with and changes from
Matt Jacob.
1997-03-12 05:24:23 +00:00
55f902601c
Set the halt flags in the right per-cpu-slot structure. From Matt Jacob.
1997-03-12 04:45:41 +00:00
adad00a33a
sanity check rpb_primary_cpu_id
1997-03-12 04:42:22 +00:00
e4307285ba
from Matt Jacob: deal with type 5 (passive release?) interrupts. (ignore them
...
but print out their vector(?) to see if we can ever discern anything useful
from it.) Also, some slight general cleanup.
1997-03-12 04:22:30 +00:00
1777807068
Add 9660 file system, and set DDB_ONPANIC to 0.
1997-03-12 02:08:02 +00:00
9a36b46f7a
tlsb bus and device file specs, s/21000/kn8ae. From Matt Jacob.
1997-03-12 01:54:23 +00:00
7e33512f13
fix up kn8ae/DEC_21000 entry
1997-03-12 01:47:46 +00:00
a9bc70551a
Clarify duties of traps 1, 2, 12, 15 for emulations
...
Include <m68k/m68k/sigreturn.s> code.
Add/fix some comments...
1997-03-11 22:58:57 +00:00
4756c63625
Call isr_soft_request() at most once per zshard interrupt.
...
In the softintr, raise to spltty before calling tty code.
1997-03-11 21:54:35 +00:00
05a47d22ea
Correct handling for Trap #2 in SunOS executables,
...
now that we know it is supposed to flush the cache.
(Was thought to be "some obscure FPU operation".)
1997-03-11 21:30:51 +00:00
f64034e8f6
Sync up with changes in GENERIC
1997-03-11 21:21:49 +00:00
b4de41ef34
Update the description of the flags for "si" devices.
...
Remove wired-down scsi disk targets (no longer needed).
Add ch, ss, uk (scsi devcies) at mycroft's requst.
1997-03-11 20:59:10 +00:00
3aa49c4b33
Remove unnecessary differences (T_BRKPT, T_WATCHPOINT gone).
1997-03-11 20:31:20 +00:00
ec6bb1d018
s/-T/-Ttext/
1997-03-11 20:13:20 +00:00
4ad7ed0b97
Moved dev_net.[ch] to sys/lib/libsa
1997-03-11 18:29:30 +00:00
9460da5eb9
Implement trace/t ("thread" trace) allowing traceback by process-id
...
rather than by frame pointer (which it a bit harder to find).
1997-03-11 16:38:23 +00:00
92d853e309
4m memory fault traps: simplify fault address logic, since per-CPU
...
fault-status reading stubs pre-cook the arguments.
illegal instruction trap: catch iflush instructions that cause this trap
on some CPU/MMU combinations.
1997-03-11 01:20:25 +00:00
01e424f233
Insert RCS Id.
1997-03-11 01:03:07 +00:00
abc39039f1
Move some parts of CP detection to cpu_attach() in cpu.c.
...
Call get_cpuinfo() for the boot CPU to collect the minimum information
to get the bootstrap rolling.
sun4/sun4c: the Interrupt Enable register is now mapped here after pmap
is initialized (was in locore).
Replace `cpumod' and `mmumod' with `cpuinfo.*' equivalents.
Allow more than one CPU to be configured in mainbus_attach().
1997-03-11 01:01:59 +00:00
476ef3b431
Per-CPU information which is collected in cpu_attach().
...
Many things in here were imported from an earlier version from Aaron
Brown and are not yet used. This version has all the attributes of a
snapshot; more to come as addtional CPU/MMU details get implemented.
1997-03-11 00:55:24 +00:00
eb71a02a7f
Re-write of CPU/MMU detection code.
...
Use a table driven classification based on CPU and MMU implementation/version
fields. Each CPU class or module defines a collection of routines that
implement CPU or MMU specific operations that can collect detailed setup
information.
All information is collected in a `cpu_softc' structure provided by the
auto-configuration code. However, in the interest of SMP support this
structure is located at a fixed virtual address identified by the
symbol `cpuinfo'. The `boot' CPU currently uses the the physical page(s) at
address 0x2000 for its cpuinfo. Consequently, the fixed virtual address
will be `KERNBASE+0x2000'.
The cache flush routines for several systems (sun4/4c vs. sun4m;
virtual vs. physical tags) have been factored out. Function pointers
to an appropriate set are located in `cpuinfo'. The former global
`cacheinfo' structure is now also a part of `cpuinfo'. Because of the
fixed virtual address of `cpuinfo' no extra performance penalties
are incurred by this move. In multi-architecture kernels, there's
no longer the need for run-time `cputyp' tests in this part of the system.
1997-03-11 00:44:00 +00:00
8d2c03c810
Replace `cputyp' run-time tests by inserting multiple branches and NOPing
...
some at startup depending on architecture.
Use `get_faultstatus' field in `cpuinfo' (initialized in cpu.c) to branch
to CPU/MMU specific fault status reading stubs on memory fault traps.
Remove code top map the Interrupt Enable register on sun4/sun4c. Its VA
has moved to a high location and is now mapped in autoconf.c after
pmap has initialized. Note: this renders NMIs during bootstrap() fatal
(maybe loading %tbr should be deferred).
1997-03-11 00:09:29 +00:00
ragge