* support chip clocks != COM_FREQ, by introducing sc_frequency (for the
mainline code) and adding a frequency parameter right after the rate
parameter to comcnattach() and com_kgdb_attach().
- Make com_isa and com_multi initialize sc_frequency to COM_FREQ.
- Make i386/machdep.c and alpha/dec_xxx.c call com*attach() with the freq.
parameter.
* supio_attach_args get two more fields: a sc_ipl and a sc_arg, both ints.
- com_supio uses the first for interupt establishment (all childs will, as
soon as they exist) and the 2nd for sc_frequency.
- drsupio passes sc_ipl alway as 5, and for the "com"s, sc_arg as 16*115200
- hyper will pass sc_ipl as 6, and sc_arg as 16 * 460800
be probed several times. This fixes the "ATAPI CD probed as wd drive" problem.
Thanks to Geoff Wing <mason@primenet.com.au> for testing this on his hardware.
I also made inclusion of LPRINTF() dependent solely on the symbol
LPTDEBUG, initialized lptdebug variable to 0 instead of 1, and
matched arguments to format strings in LPRINTF() calls.
pci_map_mem(), with appropriate changes for bus_space.
* Add extra arguments for use by pci_mapreg_*(), and make the functions
static.
* Rewrite pci_mapreg_info() and pci_mapreg_map() as wrappers around
pci_*_find(), using the documented interface.
Because of the braindead design of the SB the input and output have to
use different precisions (8 and 16 bits). It is possible to set the driver
to use 8 bits on both and it will the emulate 8 bits on the output by
expanding it to 16 bits.
looking what's the autoconfig do on strange harware, and ATAPI_DEBUG2 is
for debuging data transfers (and is really verbose once the machine has booted
from an IDE disk).
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
two DMA channels to do e.g. full-duplex. This allows
a way of specifying the second channel in a sane way.
THIS IS TEMPORARY. The drq2 locator will go away when
the locator system has been changed to allow multiple
values per locator.
* hoist code to deal with fragments of a 16-byte chunk outside
main copy loop.
* over 98% of dynamic calls are 2-byte-algnied but not 4-byte-aligned
(due to 14-byte Ether headers). kernel bcopy is poorly tune for this.
Replace bcopy() with inline code tuned to minimize accesses
to DMA buffers, which aren't uncached on mips.
Tested on 5000/240 (3MAXPLUS) and 3000/700 (sandpiper) (mjacob@feral.com)
at the same time instead by using two different calls. This enables
it to check more easily if the combined mode is all right.
- Improve the error checking in audio.c.
- Add a new audio property, AUDIO_PROP_INDEPENDENT, show if the
play and record settings are independent.
- Fix some buglets in audio.c.
-put all early console / KGDB initialization into 1 exported function
(com_*_attach()) each, dont use global variables anymore
-use the passed tcflag_t for port settings instead of hardwiring 8N1
-at autoconfiguration attach time, decide if the attaching device is
already console / KGDB by comparing bus tag and base addr (cgd's wish)
-export a function "com_is_console()" for use by driver frontends for
this comparision
-delay setting of cn_tab->cn_dev until autoconfiguration attach
to get the minor number right
-delete unused comcnprobe() and comcninit()
gup to the kernel) more detailed SCSI error printing, based off of final
SCSI-2 specification. This will also print out things like progress indicator
errors, and will also dump out additional sense bytes that haven't been decoded.
Also, turned the error message 'DELAYED' to 'DEFERRED' since that's more
accurate.
able to read SXP registers (instead of panicing). Probably have done a bit
of setup overkill- we now alloc some scratch memory for the 2100 that I thought
I would need for the Port database, but so far I haven't needed to retrieve
the port database. Well, early days yet.
-Separate KGDB port initialization and softc related stuff to allow
KGDB to be attached in early system startup, before autoconfiguration.
-Export the variables needed by md code to hand-craft bus tag/handle.
-Fix initialization to enable interrupt by line break.
-Call DDB/KGDB at line break (move DDB call from the softirq handler
to the hard handler because it should work without a tty attached too).
* Make it possible to use software assisted encodings that expand the
sample size.
* Use 16 bits per sample when emulating mulaw coding on the SB.
* Prepare for SB16 without CT1745 mixer.
a command to the 82586 for every frame to be transmitted. Instead, a
single command sets off the execution of a chain of commands consisting
of alternate XMITs and NO-OPs, where the link fields in the NO-OPs are
set to loop back onto themselves until the next XMIT is ready to go.
This trick found on a Linux WEB page.
All this induces reasonable transmission performance in my old multibus
adapter. The receiver performance is still abysmal..
- Change the way attach and open works to allow multiple audio
devices.
- Split the mulaw.c file into two to avoid dragging in mulaw
convertsion when they are not needed. Add 16 bit alaw/mulaw tables.
- Change the way audio properties are gotten.
- Recognize more versions os SoundBlaster.
re-enabled with ASC_IOASIC_BOUNCE.
All DMA buffered processing is now done in the bus-specific DMA routines
in asc_ioasic.c and asc_tc.c.
Disable several informational messages dealing with non-empty FIFO conditions,
but allow enabling with ASC_DIAGNOSTIC for troubleshooting.
- It is now possible to handle devices that want "looping" DMA,
e.g. the SoundBlaster correctly. The WSS and SB drivers use this.
To do this several new methods were introduced in audio_hw_if.
- Different silence handling (forced by previous change).
- The audio driver can now be mmap()-ed, but due to problems in
the VM system only for writing for now.
- The OSS (Linux) audio emulation takes advantage of some of the
new features.
* Move clockvar.h (header file for generic clock code) to sys/dev/dec.
* Move if_le_dec.c with DEC padded LANCE-dma (pmax/pmax, ioasic, vax 3400)
to sys/dev/dec. Remove from sys/dev/tc.
* Declare attribute le_dec_subr in /sys/dev/dec/files.dec,
use if_le_dec.c when it's defined.
* Move IOCTL asic declaration from pmax and Alpha MD machine
files to sys/dev/tc/files.tc.
* move TurboChannel and ioasic if_le attachments from pmax and Alpha machine
config files to /sys/dev/tc/files.tc. Add le_dec_subr attribute.
* Add if_le_dec attribute to if_le_ibus (pmax ds3100 pmax) LANCE attachment.
zero. We use this later when the COMPLETE message comes in to set the
final residual count to zero. The flag is reset if the target resumes
a data phase. This obsoletes the `AUTOSAVE' quirk (for this driver).
Also, avoid overwriting the residual count if a SENSE was appended to
the current transaction.
renamed AUDIO_ENCODING_SLINEAR and AUDIO_ENCODING_LINEAR reverts to the
NetBSD 1.2 sematics. A kernel with COMPAT_12 defined will accept
AUDIO_ENCODING_LINEAR and treat it as before, without COMPAT_12 it
will be rejected.
'inline' as well as static. mark prototypes for static inline functions
as possibly unused (with __attribute__ ((unused))), to avoid generating
warnings when compiling without optimization but with most ports'
default warning flags. Clean up prototype list spacing, and make it more
consistent.
connect to their 1-wire bus like the DS2404 "EconoRAM Time Chip"
- and -
* Interface function definitions for this kind of chips. Currently only
low-level byte_read and _write, implenented as inline functions.
This functions take a struct ds_handle * (also defined here), which contains
pointers to bit-read/write and reset functions.
Eventually, prototypes for memory-access functions should go here, and the
1-wire bus should be made a BSD auto-configuration bus.
(a) The interrupt is a RESEL interrupt, and
(b) our state is SELECTING.
This condition can occur in perfectly normal operation if we are using
DMA to select the target and we are interrupted by another target
reselecting us. Per discussion with Paul Krannenburg.
Every ccb locks 64k of memory for dma buffers.
Instead of AHA_CCB_MAX ccbs using 1MByte only sc_link.openings ccbs
per device are allocated. Thus we now use only 128KByte per device present.
- If the partition is already open, skip the open/close step. (Sync
with other disk drivers.)
- foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
from the disklabel accordingly.
- Pass correct arguments to ofdopen() and ofdclose().
- If the partition was previously open, don't do the open/close steps.
(Sync with other disk drivers.)
- foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
from the disklabel accordingly.
greater flexibility in its use. Additionally, add support for "geometry
emulation". This allows the "geometry" of the "disk" to be specified
at config time, providing near-perfect emulation of disklabel-less floppies,
CD-ROMs, etc., including non-512-byte sectors. If a geometry is not
specified at config time, a default based on 1M cylinders will be used.
clock rate for this board on Alpha/PCI systems. Under x86/PCI, the
board f/w will correctly tell you "I'm running at 60Mhz", so the code
that preserved that across a board reset (which would drop the chip
back to 40Mhz) worked fine. On the 8200, the chip was saying "I'm 40Mhz"-
which wasn't true. This turned out to be okay as long as you didn't have
any FAST or UltraFast targets- In fact, setting the chip to 40Mhz allowed
you to run up to 8Mhz SCSI. Unfortunately you die bigtime on the devices
that go faster than that. The fix here is to only use what the chip tells
you the clock rate is in the cases you don't really know (sbus is the
only case where this could be different, although with 66Mhz PCI coming up,
this may change).
call for the board's memory space to be PCI_MAPREG_MEM_TYPE_32BIT_1M or
PCI_MAPREG_MEM_TYPE_32BIT depending on the board ID. Also, remove a
bogus extra argument to an interrupt-establishment-error printf. Problems
pointed out by Jarkko Torppa <torppa@cute.fi> in PR 3753, but fixed slightly
differently than he suggested.
(1) fix a printf format (%x to print int, not %lx).
(2) fix probe of 4th chip/16th channel (used to tell whether or not the
board is a 16- or 32-port board) by removing an incorrect offset so
that the code matched its comments. (!!!)
(3) fix storage of chip number in per-channel structure so that it actually
stores the chip number, rather than the chip offset. This allows the
driver to work with more than the first four channels (i.e. with chips
other than chip number 0, which happens to have an offset of zero). (!!!)
MESSAGE_REJECT in response to SDTR or WDTR. Because of this, the
printfs that indicate refusal of sync/wide negotiation are unneeded
in normal operation. In the __NetBSD__ case, disable them by default.
They, like the other extra-verbose ahc driver boot messages, may be
reenabled with "options DEBUG". The behavior in the !__NetBSD__ case
is unchanged.
perry