Added the functions atmoic_set_bit() and atomic_clear_bit() that
can be used for setting and clearings bits atomically (need interrupts
to be turned off).
GPROF and PROFILE_ASM are defined.
Register usage has been changed to avoid using r11. This means we have
one less register to save during this function.
booting.
After assembling the post FP processing callback branch call
sync_icache() if CPU_SA110 is defined.
Return a valid signal code when raising a SIGFPE exception so
the cause of the SIGFPE can be determined.
Added the functions arm_fpe_getcontext() and arm_fpe_setcontext()
to obtain the FP context in a FPE independant form for the ptrace()
syscall.
In db_write_text() call sync_caches() after modifing the text area
if CPU_SA110 is defined.
Added a new machine command "frame" to print out a trapframe.
Trap the kernel break point instruction specifically and panic on
any other undefined instruction being executed in SVC mode.
motherboard.
Cleaned up a lot of code to match KNF.
When the device is attach the vidc refclk frequency is reported along
with the amount of video memory and the type.
go wrong when console blanking occurs while X is running.
The blanktime ioctl now allows blanking times to be set, force
immediate blanking or diable blanking on a per virtual console basis.
Updated the console version number to revision D.
number field and an core identity string pointer.
Labels are now defined for all the entry points in the core header
structure so that the linker can relocate the branches to the core.
The core entry points are now branch instructions relative to the
start of the core so the address of the core function does not have to
be calcuated are call time.
Define the two new fields added to the FPE core header in
the arm_fpe_mod_hdr_t structure.
Added prototypes for arm_fpe_getcontext() and arm_fpe_setcontext().
Updated the prototypes for arm_fpe_core_loadcontext() and
arm_fpe_core_savecontext() to pass a fp_context_frame pointer.
CPU_SA110 and CPU_LATE_ABORT.
Updated the CLKF_INTR() macro for changes made to the interrupt system.
Updated some of the CPU ID codes.
Added the CPU ID for the ARM8.
This is for an Acorn A7000 machine with an ARM7500 CPU and no VRAM.
This config should also work for other ARM7500 machines with an
architecture that matches Acorns.
Make fp_reg_t a typedef of fp_extended_precision_t.
Rename the fp_state structure to fpe_sp_state as it describes
the single precision FPE state held in the pcb and is internal to the
kernel.
Define a new fp_state structure that is for user access to the fp
state (e.g. via ptrace()).
the AMD AM53CF94 Enhanced SCSI Controller. The code is based on the
SFAS216 driver as these chips are very similar. There are several
differences but more will follow.
Use definitions from this file for match_podule() rather than hardcoded
values.
Added a routine asc_minphys() in preparation for driver changes when on
card DMA support is added.
Use definitions from this file for match_podule() rather than hardcoded
values.
Reset the interface following a bad packet. This fixes some jams when
the driver failed to recover properly after a bad packet.
podule_data.h instead.
Removed the dead function find_podule().
The 0xf5 entry in the podules chunck directory is now searched for and
the podule description associated with this entry is placed in the
description field of the podule structure.
Generally tidied up all the comments.
- Fix up usage of MBD_ISPID().
- Ensure that we never deal with a NULL proc, and if our proc has
no pcb, punt. Suggested by Gordon Ross.
- Eliminate some redundant NULL pointer checks in the T_MMUFLT cases;
proc0.p_addr is now initialized early, and we make a single test
for sanity at the top of trap() now.
- Initialize proc0.p_addr just after setting up the kernel stack, to avoid
getting NULL pointers in trap(). Change suggested by Gordon Ross.
- Panic if main() returns.
- Tidy up a couple of comments.
(remaps page read/write/cache-inhibit, does write, restores previous
mapping). Kernel text no longer needs to be read/write with DDB/KGDB
is in the kernel.
Based on a similar module written for the Sun3 port by Gordon Ross,
and modified somewhat by me.
- Offset kernel text one page. Stash the PA of this offset page for
use later.
- Add a few comments.
- Free up some registers earlier in the initialization process.
- Use a `prototc' to set the Translation Control register, rather
than relying on a2 pointing just past the MMU trampoline in the
high page. (Suggested by Charles Hannum.)
- Set VBR to the kernel vector table just before turning on the MMU.
- Just before rebooting, set VBR to 0, which is what the BOOTROM expects
it to be.
kernel setroot(). The device type for network boot is set like any
other device now. Also, call the punit entry point for device drivers
to properly set `bootdev'.
The "options GENERIC" entry in kernel config files is not longer necessary
for "swap generic" kernels. Uses new config constructs which work with
some glue in an old config environment. This code will support new config
with minimal changes.
an unrecognized keyboard produced garbage on keypresses in the kernel,
but worked in the boot program (which has this default). The bug is
that the keymap pointers are unitialized.
mips_r2000_, mips_R2000_ -> mips1_
mips_r4000_, mips_R4000_ -> mips3_
(which are also, for mnemonic reasons, consistent with gcc flag usage,
rather than using mipsI_ and mipsIII_).
Where CACHED_TO_HYS() is still needed for kernel-virtual-to-physical
or physical-to-uncached mapping (fb drivers), replace with
`#include <mips/cpuregs.h>'.
* dcparam() with normal tty t_param interface, which calls
* cold_dcparam() called with explicit dc7085 register address
and flags, which does the work and is also callable when cold,
to set up console (or kgdb) line parameters.
* use mips_round_page,mips_trunc_seg() instead of
pica_round_page(),pica_trunc_page().
* discard (unused) return value from TLBUpdate(), and delete
(unused) temporary variable used to hold it.
* Move mips-I pte (TLBlo) definitions from pmax/include/pte.h
to mips/include/mips1_pte.h
* Move mips-III pte (TLBlo) definitions from pica/include/pte.h
to mips/include/mips3_pte.h
* Add new mips/include/pte.h, which includes exactly one of
mips1_pte.h or mips3_pte.h (which still have namespace collisions),
depending on "options MIPS1" or "options MIPS3". (hack).
Move soft kvtopte(), ptetovk() definitions to mips/include/pte.h
* Add macro PTE_TO_PADDR() to hide the different hardware TLB formats
when mapping from pte to physical address.
* Add macro PTE_READONLY() to hide lack of SW read-only bit in mips-III
tlb. (mips1 pmap uses a sw bit in the PTE, mips3 looks up RO bit in
the kernel pmap.)
* Use macros (not direct TLB frobbing) in mips/trap.c, to make it
mips-1/mips-III indepenndet.
* Change {pmax,pica}/include/pte.h to just do #include <mips/pte.h>.
jump-table) locore entrypoints, so the stack traceback code can use
the end marker to handle entry points specially when doing tracebacks,
even if it doesn't know about them explicitly.
* fold in netBSD style changes:
``if (foo = bar)'' -> ``if ((foo = bar) != 0)''
* add mips1 vector as well as mips3 vector
* change vector names to make mips1 and mips3 locore entrpoints distinct
* add pmax additions (e.g., old fixes to ktrace code, kernel-TLB_miss
instrumentation)
* update stack traceback code to a newer version of the pmax code.
add catch-all case, with distinct mips1 and mips3 ranges for locore
entry points, cases to catch othewise-unknown locore entrypoints and
vector code (which have special entry sequences and require special
support to trace through). The relevant mips1 and mips3 functions are
of course now distinct.
NetBSD-current changes:
* change include paths to be relative to the kernel-source tree
(e.g., `/sys') instead of arch/pmax/conf.
* add explicit options for exec packages (EXEC_ELF32, EXEC_ECOFF
for COMPAT_ULTRIX)
* comment out references to still-unsuppoted MI scsi.
DEC dc503 cursor chip) into Decstation 2100,3100 cfattach front-end
and ``machine-independent'' back-end.
pm_ds.c: pmin/pmax cfattach front-end
pm.c: bt478, 503 back-end
pmvar.h: declarations of back-end normal and console attach
entry points.
