9c61c22d66
Clean up message a tad.
1995-09-14 02:43:51 +00:00
18a11cecc7
Update a comment.
1995-09-12 22:52:08 +00:00
d8dc3d91c0
Update for Leo's changes.
1995-09-12 22:31:45 +00:00
1ae7af5b59
Updates from Leo's changes in the atari port.
1995-09-12 21:20:18 +00:00
639f90ef6e
Update from Leo's changes.
1995-09-12 21:05:58 +00:00
c91abc3e61
Remove infinite loop per Leo and Mycroft.
1995-09-05 11:21:34 +00:00
19a99aa395
Get softc as parameter in interrupt function, using new changes from
...
via.[ch]
1995-09-04 05:07:16 +00:00
129ca2cea9
Make VIA2 interrupts pass an argument in and let the scsi_register_*_intr
...
functions use that, too.
1995-09-04 05:05:58 +00:00
4f76655592
Fix a goof in the latest changes.
1995-09-04 05:05:11 +00:00
02883e7341
Remove an extra "talk" command--from Ken Nakata <kenn@remus.rutgers.edu>
1995-09-04 02:50:57 +00:00
86d6e121cd
Add support for Extended Apple Mouse Protocol from
...
Ken Nakata <kenn@remus.rutgers.edu>.
1995-09-03 20:59:53 +00:00
b394d7fc7d
Enable ADB interrupts unconditionally if not using setup_egret().
1995-09-03 20:47:21 +00:00
de4100b643
Clean up a bit.
1995-09-03 14:54:31 +00:00
761b3a8340
Clean up some.
1995-09-03 14:51:38 +00:00
30c554fc9d
Changes from Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>.
...
This forces the need for booter version 1.8.
1995-09-03 14:37:16 +00:00
745cb60f16
Note that this is now an obsolete driver.
1995-09-03 03:39:38 +00:00
e9a9533544
Make the new m.i. scsi driver the default.
1995-09-03 03:37:32 +00:00
166af00381
Make a local copy of the atari m.i. scsi driver sources for the time
...
being. Some people aren't supping arch/atari and this allows those
people to get the sources.
1995-09-03 03:36:35 +00:00
a7783604fd
Optimize this some. Still seems slower than it ought to be.
...
Register interrupt functions with via.c.
Clean up somewhat. Turn off DEBUG.
1995-09-02 19:29:42 +00:00
4ed102bbd4
Optimize accesses to VIA2 a bit.
...
Force SCSI driver to register interrupt functions and remove default
handlers.
Bring in a few changes from
Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>--more to come later.
Define VIA interrupt functions as returning void, not long.
1995-09-02 19:27:34 +00:00
42d7c233d5
Very minor cleanup.
1995-09-02 05:44:07 +00:00
9f203a792f
Weren't quite ready for the last change.
1995-09-02 05:41:12 +00:00
e60752e507
Rearrange a bit.
1995-09-02 05:35:59 +00:00
bee422d998
DTRT. This should be considered the base version of the file.
1995-09-02 03:19:37 +00:00
29053c58b2
SA_ONSTACK --> SS_ONSTACK
1995-09-01 20:05:59 +00:00
b6fb219037
Process via2/rbv interrupts from low bit to high bit.
1995-09-01 04:10:11 +00:00
e46e8e7a57
A first pass at a scsi driver based on the Atari ncr5380{reg.h,.c} code.
1995-09-01 03:43:49 +00:00
d3930dd627
In child_return(), pass oticks of 0 to userret() instead of p->p_sticks to
...
avoid slighting the child of a timer tick if it gets one after starting.
Thanks go to cgd for noticing this.
1995-08-31 03:22:55 +00:00
503d3c4927
Add constants for CSI's communications card.
1995-08-25 21:20:57 +00:00
ac0af4229f
Change VIA2:vPCR setting to allow scsi IRQ and DRQ.
1995-08-25 02:56:41 +00:00
1ed5c0babc
Some code to support a vector passed in from booter 1.8.
1995-08-24 04:27:16 +00:00
0484bdaf59
Don't panic on NMI and only take notice if DDB.
1995-08-24 04:25:07 +00:00
66dcd8fd69
Add entries for the ccd.
1995-08-17 17:40:42 +00:00
68b61ea1ad
Fix comments. .space 0x1000 was accidentally left commented so it
...
still is--just explicitly, now.
1995-08-16 13:18:24 +00:00
37004a19e4
Missing cast and semicolon in last.
1995-08-16 05:17:31 +00:00
665a6a78bc
Load the old MacOS ROMBase value back in before we jump to reset.
1995-08-16 04:48:34 +00:00
ae51ffca30
Always fail when probed--until this driver works.
1995-08-14 03:55:28 +00:00
64ea04b1d0
Be more vocal about interrupts that we don't expect.
...
Include ncrscsi.h and ncr96scsi.h.
1995-08-14 03:16:07 +00:00
7d55e1196e
Document spl()s a bit, order the splfoo()s in splX() order.
1995-08-13 01:52:16 +00:00
7a9cad50cd
Replace splnet() with splsoftnet(). Add splnet(). Make splimp() > spltty().
1995-08-13 00:23:56 +00:00
80d7b0695a
minphys() functions really should return void.
1995-08-12 20:30:45 +00:00
52e968da1a
Fix oversight in last.
1995-08-12 18:48:47 +00:00
1fd03600dd
Get rid of cpu040 for good.
1995-08-12 04:08:29 +00:00
8f58d57321
Don't fake these values.
1995-08-11 17:48:19 +00:00
72d557cf87
The serial console works again (at least on the Q700).
1995-08-11 03:29:07 +00:00
d192d70a87
Note that we've been initialized.
1995-08-11 03:02:04 +00:00
100380f075
Do the serial console a bit better (still has problems).
1995-08-11 03:00:15 +00:00
81cc5998a1
Missing increment operator for if_opackets in last change.
1995-08-09 12:16:10 +00:00
b4eecb5362
We need to set cpu040 for just a while longer.
1995-08-09 03:25:25 +00:00
53af1e73b8
Make sure we don't remap video/serial before we're done writing to it.
1995-08-09 03:23:57 +00:00
71b21ba74e
Don't go bonkers if we don't have a real swap device.
1995-08-09 03:22:50 +00:00
dbdcebe34b
Fix a few 040-isms, remove an old comment, and add a few things for the future.
1995-08-09 03:21:59 +00:00
3b5979d56c
Remove cpu040 use from here. It should only be used at boot time.
...
Take out old method for determining load address for IIci/si.
Set all but IIsi/ci to use a clock initialization value of 115200 (not
the baud rate... ;-).
1995-08-06 04:39:56 +00:00
110cf98100
Get rid of int_video_{start,length} and wierd nubus mapping.
1995-08-04 03:21:46 +00:00
70065c2ed5
Nuke int_video_start in favor of consistent use of mac68k_vidlog.
...
Don't find the internal video more than once.
Probe for internal video before nubus instead of after.
1995-08-04 02:55:06 +00:00
fb5e0a34bb
Be consistent and use mac68k_vidlog instead of int_video_start.
1995-08-04 02:47:31 +00:00
b0a1bd6e17
Use panic() instead of printf();Debugger();
1995-08-02 11:53:02 +00:00
a76e2adfab
Get rid of reference to Debugger().
1995-08-02 11:50:43 +00:00
f60a2bbccf
Add kludge for LC video and change IIvx to assume 1MB of VRAM if we can't
...
figure out how much there really is.
1995-08-02 04:15:41 +00:00
fc8739097d
Fix signed/unsigned gaff in last.
...
Bring up-to-date with latest rash of changes to if_ed.c.
1995-07-30 21:39:17 +00:00
ff5fa674dd
Fix the internal video probe again.
1995-07-30 21:35:00 +00:00
80cd97e743
delay(7) instead of delay(20) seems sufficient
1995-07-30 21:30:57 +00:00
cf76e90671
Differentiate printf for illegal instruction/fpu traps in kernel mode.
1995-07-30 19:18:28 +00:00
139f62c079
Add support for Farallon from Brian Gaeke (brg@dgate.org).
1995-07-30 13:38:04 +00:00
cf0aca3cb4
Read the packet header count in bytes, not as a word--word reads return
...
invalid data on some cards (notably old Apple Ethernet NB and Farallon
cards at least).
1995-07-30 02:44:27 +00:00
a2f49ac930
Don't show up in "slot" 0xe.\n
1995-07-28 01:34:58 +00:00
58f294f29c
get rbv_nubus_intr working--at least on the IIsi.
1995-07-27 04:19:21 +00:00
ffe4785a58
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 07:33:32 +00:00
ff7dcdbfc5
Some debugging code added.
1995-07-23 21:54:47 +00:00
1c213ea5b6
Minor #def changes.
1995-07-23 21:51:47 +00:00
83d0f4f73d
Use get_mapping only if 030 and MMU enabled. Otherwise, fake it.
1995-07-19 16:39:03 +00:00
d9b318b2be
Add support for:
...
GENERIC
RB_ASKNAME
RB_MINIROOT
Also revved up the required version of the booter because we need the
booter fixes to get this functionality.
1995-07-18 04:10:13 +00:00
a5e4549306
Stop recursive jmp0panics.
1995-07-17 01:31:14 +00:00
8d0e9635a6
Get IIsi ethernet almost working. Still misses a number of interrupts.
1995-07-17 01:26:02 +00:00
c5fe9f62ff
Cleanup a bit.
1995-07-17 01:25:12 +00:00
c5724ea3a3
Some more bugs fixed and functionality corrected by:
...
"Paul R. Goyette" <paul@pgoyette.bdt.com>.
Implemeted the Set Scrolling Region, Set Tab Stop, and Clear All
Tab Stops functions.
1995-07-17 01:24:34 +00:00
a91a7f619b
GENERIC should have options GENERIC. Duh.
1995-07-17 01:21:29 +00:00
30c70a7c59
patch to handle cursor moves better. From Paul Goyette
...
(Paul@pgoyette.bdt.com )
1995-07-09 15:36:41 +00:00
fd69606246
Take out bogus message.
1995-07-08 12:39:12 +00:00
33cef0adfd
Clean up a lot. Run machdep.c through indent.
...
Remove a bunch of old debugging code and some dead code.
Put in some new comments. Need more.
1995-07-08 04:25:07 +00:00
3758e23b79
Add another routine for the grf display-specific drivers to return a physical
...
address.
1995-07-06 17:13:45 +00:00
e6992b3e60
Panic if we don't know how to relocate the video address.
1995-07-06 13:30:24 +00:00
84ee954356
Change NBSBASE to 0x90000000 and let it and NBSTOP be defined.
1995-07-06 13:25:30 +00:00
d1d1fbc094
Put in a cast to make compiler happy.
1995-07-06 04:17:15 +00:00
0ae9938e56
Fix (last?) bug in the IIvx kludge.
1995-07-06 03:44:46 +00:00
6503666839
If SYMTAB_SPACE is defined, set esym to be the same as end.
...
Fixup my IIvx kludge again.
1995-07-06 02:32:13 +00:00
f3274364d4
Fix a bug I introduced earlier.
1995-07-06 00:28:32 +00:00
e11c8dfd4c
Stupid programmer error in IIvx kludge.
1995-07-05 03:48:45 +00:00
38031d912a
First cut at a kludge for IIvx internal video.
1995-07-04 18:55:11 +00:00
6d08320888
Move SCSIBase from scsi.c.
1995-07-04 14:42:16 +00:00
2e4f1e0daa
Update a bit.
1995-07-04 14:38:49 +00:00
2510a4f689
A few nits.
1995-07-04 14:38:34 +00:00
1513342690
Add code to netintr to call pppintr
1995-07-04 12:14:32 +00:00
7263209ce6
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-04 07:15:28 +00:00
f92d7eb51f
Clean up some types.
1995-07-04 03:34:09 +00:00
4d6ed092f1
Fixup a comment.
1995-07-04 03:30:11 +00:00
1040af3492
Add missing interface for getting a grfmode structure from kernel.
1995-07-02 05:26:27 +00:00
ed434b457d
Fix grfmap() as well as grfmmap().
1995-07-02 00:49:52 +00:00
932a8fc9af
Set and use new fboff element from grfmode structure.
1995-07-02 00:30:25 +00:00
af7f31e30a
Add a couple elements to the grfmode structure.
1995-07-02 00:29:03 +00:00
3401cca400
Fix buglet that was missed when converting nubus to non pa==va mapping.
1995-07-01 23:40:38 +00:00
303845a487
Remove this define--we're using the new dump type.
1995-07-01 18:47:51 +00:00
eec2d38c71
Take out ncr96scsi0.
1995-07-01 16:35:54 +00:00
36654b75d9
Use flags for scsi interrupts. clean up a small bit.
1995-07-01 16:35:16 +00:00
175a1e27f4
add needs-flag for the scsi chip interfaces.
1995-07-01 16:28:13 +00:00
12ab0410c7
Clean up a tad.
1995-06-30 05:25:41 +00:00
fcde92bcba
Fix straytrap(). Update a few values in the ROM table.
1995-06-30 05:25:01 +00:00
5fced13f51
Ooops.
1995-06-30 05:23:03 +00:00
705e6bd12b
Fix oversight.
1995-06-30 05:21:33 +00:00
29bb03860c
Option key fix from Ken Nakata (kenn@remus.rutgers.edu).
1995-06-30 01:23:21 +00:00
2b71eae2c7
note that most of dev/ic's contents have changed names
1995-06-28 04:30:30 +00:00
829668e8d3
Some random cleanup and some cleanup of the dump routines, modelled on
...
i386. Untested. Remove old mac68k-specific stack trace code, etc. as
the cleanup.
1995-06-28 04:09:25 +00:00
2d49c3885b
clean up definitions of ctod(), dtoc(), ctob(), btoc(), btodb(), and
...
dbtob(). remove unused definitions of ctos(), stoc(), and dtob().
1995-06-26 06:55:38 +00:00
1c0be437b1
define __BDEVSW_DUMP_OLD_TYPE for ports where it's true. clean up
...
some m68k ports inclusion of common header.
1995-06-26 05:13:37 +00:00
600cdad805
Stupid typo in last.
1995-06-25 14:02:09 +00:00
50d8509da2
Stupid pasto in last.
1995-06-25 13:53:21 +00:00
0958ef72c8
Add libcompat.
1995-06-25 13:39:37 +00:00
2a153a49b1
Fix the clean target.
1995-06-25 13:06:32 +00:00
4d6069140b
Get the units right...
1995-06-25 04:49:05 +00:00
b1addb6674
Patches from Walter Ruetten (walter@ghpc8.ihf.rwth-aachen.de)
...
and Daniel Risacher (magnus@mit.edu ). Apparently with some
helpful discussion from John Wittkoski (jpw@insoft.com ).
This works on my IIcx and IIsi. Still needs a bit of cleaning up.
1995-06-25 03:24:09 +00:00
b1598cdd1b
Remove a compile warning.
1995-06-25 02:46:46 +00:00
fc6fb65d62
Do something a lot closer to the right thing for FPU_EMULATE/FPSP/040
...
and subsets thereof.
1995-06-25 02:45:14 +00:00
5781a8dcc0
The kernel is called netbsd, not vmunix.
1995-06-24 17:24:24 +00:00
4f05f7e8f6
pmap_page_index isn't a macro.
1995-06-24 16:18:50 +00:00
1dadb15deb
Remove DIAGNOSTIC
1995-06-22 23:24:18 +00:00
3ddc81510c
Add avail_end to keep ps and friends happy. Possibly a short-term fix.
1995-06-22 03:08:29 +00:00
1ccd38d9e1
Don't use constants for addresses. VA != PA...
1995-06-21 03:59:07 +00:00
229ed22747
Add function to reconfigure addresses when ROM is remapped.
1995-06-21 03:46:52 +00:00
2beeae8058
Lots of changes from hp300.
...
Removed MACHINE_NONCONTIG conditionals. Only support that
configuration, now.
Some cleanup.
1995-06-21 03:45:10 +00:00
49b9eb5e4d
A number of clean-up related changes and a few changes relating to
...
the new mapping. "real mem" is now correct for MACHINE_NONCONTIG
machines. MACHINE_NONCONTIG conditionals have been removed--only
support that case, now.
1995-06-21 03:41:51 +00:00
778adb81d1
Bring in 040 code from hp300 port.
...
Remove memory mapping code.
Update cpu_switch and a few other functions from hp300 port.
1995-06-21 03:36:27 +00:00
3d04799c79
Remove warning.
1995-06-21 03:20:58 +00:00
19b569364f
Cleanup some--needs more pruning.
1995-06-21 03:20:22 +00:00
37b6dc390f
Put page mapping code into a C module.
...
Remove old 040 version of page mapping--new way handles 040, too.
Derived from hp300 pmap_boostrap.c.
1995-06-21 03:19:35 +00:00
4a9e8ef39f
Raise MAXTSIZ, double DFLDSIZ and quadruple MAXDSIZ. Lower USRPTSIZE.
...
Remove unused mapin() macro. Update VM_MAX* macros to look like the
amiga's (easier to read than hp300's).
1995-06-21 03:17:06 +00:00
5dd8297b11
Cleanup some and make these look more like hp300 versions.
1995-06-21 03:14:06 +00:00
23622438bf
Get rid of pcb_cmap2.
1995-06-21 03:10:44 +00:00
c2184f6f5b
Update to look more like hp300. Clean up a lot.
1995-06-21 03:08:29 +00:00
04834fb800
Remove cpu_set_init_frame() define.
...
Remove BROKEN_SWAP
Change cpu_swapout() to null-op.
Remove profile_tick() define.
Add some 040 stuff and make other 040 stuff compat. with hp300 port.
Cleanup a bit.
1995-06-21 03:06:33 +00:00
7542473d6d
Clean up I/O base settings a bit.
1995-06-21 03:03:13 +00:00
697011742c
Add some debugging (conditional on DEBUG). Add a more correct probe for
...
internal video. Clean up nubusprint() a bit.
1995-06-21 02:59:08 +00:00
e4ff96e47c
Make NUBUS_BASE_TO_SLOT and reverse not depend on VA==PA for NuBus.
...
Add constant for DRSW_FARALLON.
1995-06-21 02:57:19 +00:00
6ff2537ad3
Make no assumptions about the absolute address of nubus cards.
1995-06-21 02:52:09 +00:00
cb00a78de3
Treat 0 as a failure case for ae_id_card() and take out
...
null-op check for a 0 addrlist in init.
1995-06-21 02:50:22 +00:00
f462aa095a
Be a bit more careful on the probe... Make sure that the current slot's
...
addresses contain the int_video_start--or assume that internal video is
is "slot" 0xE.
1995-06-21 02:48:00 +00:00
1eec6bfc33
Add pmap_bootstrap.c and take out mac68k_init.c.
1995-06-21 02:43:19 +00:00
55fbbc705d
Wrap with #ifndef _XXX_FLOAT_H_/#define _XXX_FLOAT_H_/ ... /#endif.
1995-06-20 20:45:22 +00:00
67bfc330f1
Fix a typo that's gone unnoticed for a long time. Noticed by Brian
...
Gaeke (brg@dgate.org ).
1995-06-20 05:13:19 +00:00
caa1421dd6
Add FPSP back.
1995-06-19 03:55:15 +00:00
6f06373e06
Take out M68040, add a more specific swap and add vnd.
1995-06-19 03:53:58 +00:00
fec7ba6562
Rearrange slightly.
1995-06-16 04:45:22 +00:00
d37674426a
"Always compile before you commit."
1995-06-09 02:19:47 +00:00
90caf013ba
In the interrupt routine, bail out if we've not been initialized, yet.
1995-06-08 12:52:02 +00:00
0b3271404c
Make genassym depend on its C source.
1995-05-31 00:09:55 +00:00
81712d5ba7
Make a diagnostic message DIAGNOSTIC.
1995-05-25 11:48:06 +00:00
0521ad83a0
Make comment fit reality.
1995-05-17 00:45:55 +00:00
2b47f281fe
Some cleanup.
1995-05-17 00:37:33 +00:00
94ce6105d2
Add configuration for my gateway machine.
1995-05-17 00:33:59 +00:00
a43ca9e742
Nuke cpu_exec and remove extra semicolon on cpu_swapout() panic string
...
(preparing for more changes in a bit...)
1995-05-17 00:30:16 +00:00
fd807928aa
Add a memcpy entry point as at least a temp fix for compiling with a
...
recent gcc2 snapshot.
1995-05-17 00:28:14 +00:00
6201783f37
Set A2 to PS_STRINGS in setregs().
1995-05-17 00:00:42 +00:00
725cb78165
Actually probe for 881 vs. 882. Also add a case for 040, although it's
...
really lip-service at the moment.
1995-05-10 03:19:00 +00:00
56b5c26854
Get rid of a printf() that got left behind in the probe.
1995-05-06 18:44:48 +00:00
c4cb3e244c
Probe this like the other devices.
1995-05-06 18:33:19 +00:00
331e2bd82b
Add some code/defines to differentiate Asante and Interlan/Gator cards
...
correctly with the new nubus code.
1995-05-05 05:40:13 +00:00
8703076975
define BROKEN_SWAP and/or cpu_swapout as appropriate.
1995-05-05 03:41:51 +00:00
34e5f975f9
Don't set mrg vectors if we're using the serial console--this allows
...
machines w/ non-working desktop bus to actually get on with booting.
1995-04-30 17:01:06 +00:00
59b4da2b39
Add new nubus handling that's much more robust.
...
Update via, if_ae, and grf accordingly.
Revamp grf.
1995-04-29 20:23:36 +00:00
0e59975fac
rename files files for new config/config.old naming
1995-04-28 08:19:12 +00:00
843a2a3539
Use new files.sunos
1995-04-27 12:08:54 +00:00
a2bc99d6f1
Make these compile again.
1995-04-23 00:37:23 +00:00
545f388282
Removed sunos_machdep.c
1995-04-22 23:40:24 +00:00
94289bf2b0
Move sunos_machdep.c to m68k
1995-04-22 23:39:02 +00:00
c5f01c2a4c
Fixed comparison in SYS__syscall to be against sysent instead of
...
p->p_emul->e_sysent [Thanks Charles for pointing this out].
I think that this code needs to be fixed anyway for emulations where
SYS_syscall is not the same number as the NetBSD one (0)... (Only the
alpha port so far?)
1995-04-22 20:49:06 +00:00
de42a28a1b
- added sunos_machdep.c for sun3, atari, amiga and mac68k.
...
- changed machdep.c and trap.c to use struct emul.
- remove ep_setup references.
- added struct emul to all emulations.
1995-04-22 20:24:40 +00:00
74b3f483db
Define DELAY.
1995-04-22 13:17:51 +00:00
a992a8136c
Add some multicast byteorder-related changes from djh@mulga.cs.mu.OZ.AU.
1995-04-22 12:08:12 +00:00
dda57ad059
Use vfs_shutdown().
1995-04-22 11:53:40 +00:00
9e1f939930
Get rid of old file from hp300 origins!?
1995-04-21 11:35:15 +00:00
5982b968a9
Enable nubus interrupts after registering.
1995-04-21 04:01:27 +00:00
7063b53b26
Separate nubus interrupt registry and enablement.
1995-04-21 04:00:55 +00:00
6bc53a2398
Handle grf_softc in the config.new manner.
...
Should have been done long ago.
1995-04-21 03:44:13 +00:00
13efb6c197
First pass of KNFication. Needs more.
1995-04-21 02:47:35 +00:00
85025d789c
Prototype iteopen correctly (oversight from a while back...).
1995-04-20 15:46:56 +00:00
a6ba5f8f7e
Update to use softc better and handle mainbus being indirect.
1995-04-20 15:32:01 +00:00
8288b9238d
Make mainbus an indirect device--needs more work, but it does function.
1995-04-20 15:31:23 +00:00
64bd3f0995
Move to ptytty
...
Nuke the grf's reset space holder.
1995-04-20 15:30:22 +00:00
df693904cd
include mi scsi files file.
...
Change several devices from needs-count to needs-flag.
1995-04-20 15:28:54 +00:00
4137a8ff57
Add itetty().
1995-04-20 15:27:43 +00:00
a7f44caf1b
Add a sertty() and update to use ser_softc instead of a bunch of arrays
...
everywhere.
1995-04-20 15:27:12 +00:00
1286501d43
Grab the sun3 cpu_coredump().
1995-04-20 15:25:41 +00:00
7345c91d2e
'twould help to unmount the filesystems, wouldn't it?
1995-04-19 14:01:58 +00:00
bf68945da5
Define struct ae_ring which is necessary because BYTE_ORDER == BIG_ENDIAN,
...
but the card is in x86 byte order mode because NuBUS does the swap "for us"
on 16- and 32-bit transfers. We should probably figure some way to use
the std struct ed_ring if/when all the 8390 drivers are all fully merged.
1995-04-19 04:46:06 +00:00
2b1a13ab2f
Initialize totlen in ae_put. Thanks to chopps for pointing it out!
...
Also, switch back from using struct ed_ring to using struct ae_ring
because BYTE_ORDER == BIG_ENDIAN, but the card is in x86 byte order
mode because NuBUS does the swap "for us" on 16- and 32-bit transfers.
We should probably figure some way to use the std ed_ring if/when
all the 8390 drivers are all fully merged.
1995-04-19 04:43:36 +00:00
4d37095e31
Fix typo: ieefp.h -> ieeefp.h.
1995-04-16 16:47:03 +00:00
38cb076019
Get this working. Mainly, don't always round to word transfers on
...
receive.
1995-04-16 00:14:54 +00:00
f93fa3c440
Update interrupts to use (void *client_data) instead of (int unit) as
...
parameter to interrupt function.
1995-04-13 04:04:58 +00:00
c9e2e6e2a8
Update to use dev/ic/dp8390.h. Mostly from mycroft.
...
Still get extra data on either transmit or recieve, but want to
checkpoint this work.
1995-04-13 03:58:18 +00:00
2bc91b9c2c
Almost working synch with if_ed.c. Much by mycroft. Fixups by me.
...
Inserts garbage characters--this driver isn't ready for use quite yet.
1995-04-12 15:01:14 +00:00
9554285cb6
Fixup from last changes.
...
Remove clock device.
1995-04-12 14:59:19 +00:00
13dc6a7a07
Make nubus indirect. Duh.
1995-04-12 14:57:40 +00:00
09ba51f21e
Fix typo from last changes.
1995-04-12 14:55:45 +00:00
df78dbb096
Reference cninit.c as well as cons.c
1995-04-11 09:52:11 +00:00
7114c30418
Use global 8530 defs.
1995-04-11 03:00:38 +00:00
e25c1817cf
kernel_pmap --> pmap_kernel()
1995-04-10 13:08:28 +00:00
a15027bd11
Remove old comment.
1995-04-10 13:01:19 +00:00
769e59cd1f
Remove bogus extra tape cdevsw entry.
...
Change adb dev init to a mouse dev init.
Remove non-existant clock device stuff.
1995-04-10 12:59:48 +00:00
22cefc03bc
Bring back pmap_kernel(), for now always inlined as a pointer to
...
kernel_pmap_store.
1995-04-10 12:41:29 +00:00
127e0761c9
Add mmopen(), mmclose(), and mmmmap() where appropriate. Lock vmmap when
...
needed. Make types consistent.
1995-04-10 11:54:47 +00:00
d751b03236
Minor consistency nits.
1995-04-10 10:01:40 +00:00
8f8bccf41f
Switch grfmap and grfmmap.
1995-04-10 07:56:46 +00:00
942c5ec591
Map vnd device from chr to blk.
1995-04-10 07:54:45 +00:00
d5cfa2c98f
Synchronize with latest changes to hp300 conf.c and give dummy mem
...
open/close/map routines (map is dummy for now, but should be implemented
when I'm more awake).
1995-04-10 05:57:40 +00:00
e957423a98
Move fp_except and fp_rnd definitions to machine/include.
1995-04-09 21:31:58 +00:00
c17558aa9b
Fixup types of a few functions to match if.h structure.
1995-04-08 20:55:26 +00:00
426b77c9eb
Put in a dummy PostEvent trap and enable ADB interrupts for IIci. From
...
Paul Goyette (paul@pgoyette.bdt.com ).
I went ahead and removed the conditional around setting the ADB interrupt
enable. I don't expect Apple will have changed this on any other models
as it's the same on all documented models.
1995-04-08 20:46:23 +00:00
7e4d7125a3
Back to previous version of the serial driver until we can figure out
...
why the new one gets a lot of overflows and doesn't work on the IIsi
or IIvx at all.
1995-04-08 13:20:52 +00:00
870235352d
Print a diagnostic if we do hit the watchdog and recover w/o resetting.
1995-04-08 13:17:55 +00:00
8ca9890ea2
Actually set the vectors for RBV as well as VIA2.
...
Don't go to spl4 when we have an ADB interrupt.
Turn off video interrupts on the SE/30.
1995-04-08 13:16:33 +00:00
10fc499f8c
Nuke FPCOPROC and add fpu device driver and FPU_EMULATE from sun3.
...
Still need to figure out how to handle this w/ FPSP on 68040's but
since we're not really using the 68040 yet...
1995-03-29 07:38:34 +00:00
7a557178ba
Get rid of some BARFs and assign some semi-reasonable spl()s...
1995-03-29 07:35:35 +00:00
9fca93fa60
Nuke FPCOPROC and add FPU_EMULATE to GENERIC.
...
Support the above with gwr's sun3 stuff.
1995-03-29 07:28:48 +00:00
4c88a6a961
Don't MRG_TEST the tracing if MRG_TRACE isn't defined. From
...
Paul Goyette (paul@pgoyette.bdt.com ).
1995-03-26 18:10:23 +00:00
625d11a739
sun3 fixes for COMPAT_SUNOS.
1995-03-26 15:53:36 +00:00
9d7efb1fb0
Do iteon() and iteoff(). Right now, they just clear/draw the cursor and
...
clear the screen. "We" should look at updating these further.
1995-03-26 15:52:21 +00:00
fa2133533d
invoke ktrsyscall with (vp, code, argsize, args) as args.
1995-03-26 08:03:29 +00:00
5a8670a41a
add_nubus_intr takes int (*)(), not void (*)().
...
Fix slot interrupts more.
1995-03-25 22:30:39 +00:00
bc14b5cbcc
Don't count video interrupts.
1995-03-25 22:28:30 +00:00
bb035dee62
KERNEL -> _KERNEL
1995-03-23 20:19:16 +00:00
d57fb977bb
Added -D_KERNEL to CFLAGS alongside each -DKERNEL.
1995-03-23 19:46:18 +00:00
50e913cf92
Handle VIA2 (RBV?) better. Speed up interrupt processing (which had a
...
negative impact on the ethernet timeouts). This is still not correct,
but I am unsure what is correct. We can, apparently, get a nubus
interrupt without any slots showing an interrupt condition. Ick. This
does not always happen before we apparently lose an interrupt, either
(see last (chronological) log message for if_ae.c).
Someone with a fresh set of eyes should probably look at this, but it's
cobbled together to (mostly) work.
1995-03-23 14:16:38 +00:00
24787aea0e
Add macvideo_intr to handle video interrupts. Currently has behavior
...
that was previously in slot_noint().
1995-03-23 13:45:07 +00:00
129893572f
Serious kludge around network timeouts. Network timeouts seem to be
...
caused by the VIA missing the ethernet slot interrupt. If we get a
watchdog, try calling the via's nubus interrupt function. If that
causes an interrupt, don't reset anything. If it doesn't, use old
behavior (log timeout and reset).
Yuck.
1995-03-23 13:00:05 +00:00
8b2f3e8f69
Modify handling of via2 interrupts. Ethernet is much more reliable
...
for me, now (one problem down, anyway).
1995-03-20 05:59:42 +00:00
b8403d582b
don't be so quick to cast macro arguments to unsigned; if the
...
arguments are really off_t's (e.g. to btodb), then you can lose
information. This was the "> 4G file systems don't work" bug; physio
uses btodb, which was broken.
1995-03-18 07:22:43 +00:00
a6f94aae0e
Let's do leave the RAW_PART alone...
1995-03-17 03:40:41 +00:00
5b07b9403e
Nuke NEWCONFIG. It's not used anymore at all.
1995-03-11 13:56:36 +00:00
999ff6a003
Use M68030 and M68040 instead of MC... Thanks to Luke Mewburn for
...
pointing out this inconsistency.
1995-03-11 13:55:03 +00:00
dc3d752c6c
Fix last arg to scdebug_ret().
1995-03-09 08:59:45 +00:00
db7371a9b7
Fix some types:
...
* code, args, and rval should use register_t.
* argsize should be a size_t.
Undo some of the differences between this syscall() and the hp300 version.
1995-03-09 07:57:42 +00:00
9940bbf358
Clean up via.c a good bit--still needs more. Get rid of some timing stuff
...
that we aren't using at all anymore.
1995-03-01 03:48:44 +00:00
50721bd46f
Raise watchdog timer a tad.
1995-03-01 03:47:08 +00:00
4c34be6b52
Clean up deleted files.
1995-03-01 00:00:00 +00:00
52c429f919
Clean up via.c a bit. Still needs lots of work.
1995-02-22 01:42:43 +00:00
ada7451e87
Fix copyright, add CVS version, and cleanup comments.
1995-02-16 00:02:12 +00:00
9f5abcb930
Add support from Erik Vogan for reading and writing PRAM. Don't enable
...
writing yet, though.
1995-02-15 23:55:51 +00:00
ede2edbeb6
Update to add pramasm.s.
1995-02-15 23:54:56 +00:00
347304eb41
Many changes and updates from Dave Leonard (d@fnarg.net.au) and
...
Brad Parker (brad@fcr.com ). I've been sitting on these for a while.
Notes from Dave:
redocumented z8530 stuff.
Added break ioctls and detection.
Pass framing/parity errors to line discipline.
Added TIOC[SG]FLAG.
Attempt at bringing all chip ops together.
deepended s/w fifos to match chip's.
1995-02-11 19:06:57 +00:00
cce0e858f9
Trim the interrupt counter space some and add _eintrnames and _eintrcnt
...
for vmstat.
1995-02-08 04:06:48 +00:00
ff26dc4f91
Add major for vnd.
1995-02-05 06:13:52 +00:00
briggs