execpt without quotes. meant to be __CONCAT()ted for easy #includes
of machine-dependent headers for MI code (e.g. for the MI ISA/EISA/PCI/TC
bus code).
Several had: _MACHINE_ICU_H_ -> _NS32K_ICU_H_
cpu.h * Removed definition of cpu_swapout.
* Added definition of cpu_wait.
frame.h * added struct switchframe
icu.h * tweeked ints_off
param.h * More derived constants.
* Alot of things taken over from i386/include/param.h.
pcb.h * Removed pcb_flags (was unused) and pcb_pl.
The current priority level is now stored
in the switch frame by cpu_switch.
pmap.h * Taken over from i386/include/pmap.h.
psl.h * Add USERMODE definition
trap.h * T_INTERRUPT -> T_AST
types.h * Remove __FORK_BRAINDAMAGE
vmparam.h * Taken over from i386/include/vmparam.h.
Added definition of INTSTACK.
clock.c * Removed definition of DELAY.
intr.c * Removed an unneeded $Id:....$
locore.s * Moved some of the low level initialization
code to machdep.c.
* Defined proc_trampoline.
* Changed sigcode to pass scp to SYS_sigreturn.
* Changed copyin/copyout/fu*/su* to take advantage
of the ns32532's dual address instructions.
* Recoded copyinstr/copyoutstr/copystr in assembler.
* Added a new and faster version of bzero.
This makes bzero.s unnecessary.
* Defined suswintr to make profiling work.
* Recoded cpu_switch modelled after the i386
version of cpu_switch.
* Added support for lazy fpu state restore to
cpu_switch.
* Recoded trap handling code to be more readable.
* Added experimental code for single cacheline
invalidation.
machdep.c * Copied over cpu_startup from i386/i386/machdep.c.
* Changed sys_sigreturn to take advantage of the
argument passed by the trampoline code.
* Changed boot to call doshutdownhooks and to store
machine state in case of a panic.
* Changed setregs to clear the fpu registers.
* Recoded low_level_init. It's now called init532.
* cpu_reset: New function, resets the machine.
trap.c * Pulled over from i386/i386/trap.c.
* Added support for lazy saved/restored fpu state.
vm_machdep.c * Removed kstack double mapping by pulling over alot
of code from i386/i386/vm_machdep.c.
* Added support for lazy saved/restored fpu state.
* Moved freeing of process resources from cpu_wait
to cpu_exit.
* Pulled over cpu_coredump, pagemove, vmapbuf and
vunmapbuf from i386/i386/vm_machdep.c.
pmap.c * Pulled over from i386/i386/pmap.c.
genassym.c * Removed old and unused definitions, added new ones.
sys_machdep.c * Moved sys_sysarch from machdep.c to sys_machdep.c.
process_machdep.c * Changed to work without ktack double mapping.
* Changed to work with lazy saved/restored fpu state.
- New metrics handling. Metrics are now kept in the new
`struct disk'. Busy time is now stored as a timeval, and
transfer count in bytes.
- Storage for disklabels is now dynamically allocated, so that
the size of the disk structure is not machine-dependent.
- Several new functions for attaching and detaching disks, and
handling metrics calculation.
Old-style instrumentation is still supported in drivers that did it before.
However, old-style instrumentation is being deprecated, and will go away
once the userland utilities are updated for the new framework.
For usage and architectural details, see the forthcoming disk(9) manual
page.
* conf/DEFAULT: new file, default install kernel
* conf/INSTALL: +MSDOSFS, +NO_INLINE_SPLX, +RD_SIZE=2mb, +scn4/5
* conf/KLONDIKE: cosmetic changes
* conf/STEELHEAD: cosmetic changes
* conf/files.pc532: rd got a file of it's own
* dev/lpt.c: changes to support lower interrupt latency, packet input/output
is now done at spl0
* dev/ncr.c: changes to support the most recent atari version of the ncr5380
driver
* dev/ncr5380.c, dev/ncr5380reg.h: upgraded to most recent atari version,
memcpy -> bcopy.
* dev/rd.c: ramdisk driver
* dev/scn.c: by patching scndefaultrate, the kernel's default baud rate can
be changed with gdb
* include/psl.h: struct iv now protected by !LOCORE && _KERNEL
inlining of splx can be prevented with new kernel option NO_INLINE_SPLX
splx_di is like splx but leaves processor interrupts disabled
* pc532/autoconf.c: cosmetic changes
* pc532/conf.c: with rd entries
* pc532/intr.c: changes to support splx_di
* pc532/locore.s: ramdisk is no longer initialized
not splx, but rett is now used to reenable CPU interrupts when leaving the
interrupt service routine. This is necessary to prevent recursive interrupts.
* pc532/sys_machdep.c: memcpy -> bcopy
* pc532/mem.c: moved ramdisk to dev/rd.c
* stand/Makefile: boot is now loaded at 0x3eb800 instead of 0x363800
Use current form of libsa and libkern.
* stand/inflate.c: emit twiddle every 8k and not every 1k
* stand/rd.c: ramdisk starts at 0x288000
arguments are really off_t's (e.g. to btodb), then you can lose
information. This was the "> 4G file systems don't work" bug; physio
uses btodb, which was broken.
such as __warn_references() and __weak_reference() which are actually
machine dependant. This will make it easier for ports that are being
bootstraped with ELF and ECOFF based toolchains.
This change also introduces a new macro, _C_LABEL(x). _C_LABEL expands
its argument, an identifier, to a character string of the identifier
name as it is represented in an object file.
For most ports, _C_LABEL(x) will expand to "_x", for ELF based ports
_C_LABEL(x) will expand to "x".
phil