Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
121,648 Commits 606 Branches 0 Tags 3.1 GiB
6e97fad006
Commit Graph

474 Commits

Author SHA1 Message Date
scw
6e97fad006 Set up a temporary 1MB mapping to cover the SDRAM controller's registers. 2003-12-08 16:15:31 +00:00
scw
ec226f1150 Don't hard-code SDRAM size. Let ixp425_sdram_size() figure it out 
at runtime.
 2003-12-08 14:44:03 +00:00
briggs
5513f6b2e8 Make PCI host/slave detection work for the iq31244 as well as the iq80321. 2003-12-04 07:02:18 +00:00
scw
b9d5da7eda The expansion bus is mapped via ixpsip now. 2003-11-02 21:27:51 +00:00
scw
39fe0cf03e Delete the symbolsize variable. It's not useful here. 
Reported by Shoichi Miyake in port-arm/23293.
 2003-10-28 08:26:33 +00:00
lukem
f85d2d1c14 Use ${HOST_SH} instead of `sh'. 
If necessary, pull in <bsd.sys.mk> to get the definition of HOST_SH;
Makefiles that pull in one of (most of) <bsd.*.mk> will get this anyway.
 2003-10-26 07:25:33 +00:00
scw
11b5112b4e The i2c pins are not interrupt sources. 2003-10-24 10:04:01 +00:00
scw
9552c65898 - Make the compile-time selection of ixdp425 vs. zao425 actually work. 
- Flesh out cpu_reboot() to jump to Redboot via cpu_reset().
   (See XXX comment in code regarding a problem with this).
 2003-10-23 10:50:01 +00:00
briggs
1ce6ced119 As suggested by Jason Thorpe, rename m41t to m41trtc. 2003-10-20 16:24:10 +00:00
briggs
795751a888 Add i2c and the m41t00 RTC on the i2c bus. 2003-10-20 15:37:46 +00:00
ichiro
1a8b4d7eab add mapping table of pci interrupt number 2003-10-11 03:53:52 +00:00
chs
6677871b04 increase SYMTAB_SPACE. 2003-10-10 15:17:41 +00:00
scw
fb2c521159 Make it easier to support different types of IXP425 board: 
- Move board-specific PCI/GPIO initialisation to its rightful place.

 - Handle clearing down latched GPIO interrupts in a board-independent way.

 - Use MI com(4) driver for on-chip UARTs.

 - Misc. tidying up.

Tested on IXDP425.
 2003-10-08 14:55:04 +00:00
bouyer
f5a6a0a843 Add new per-chip pciide drivers. 2003-10-08 11:55:43 +00:00
bouyer
a690443244 Add atabus 2003-10-08 11:07:04 +00:00
thorpej
d322684f55 Add support for the i80312 and i80321 I2C controllers. 2003-10-06 16:06:05 +00:00
bsh
fba8e3e432 add -DCPU_S3C{2800,2410} for board/sscom.c 2003-10-05 06:58:26 +00:00
bsh
55f95bf493 move back get_com_freq() to sscom.c with #ifdef CPU_{S3C2800,S3C2410} 2003-10-05 06:57:20 +00:00
ichiro
663ccee1cc pci bus support 2003-09-25 14:11:18 +00:00
matt
1df05a73fe Fix GCC 3.3.1 nits. 2003-09-21 19:33:13 +00:00
chris
cfb7a98211 Add COMPAT_16 to most arm based kernels. Mainly in preperation for doing 
SA_SIGINFO work.
 2003-09-13 13:30:01 +00:00
briggs
06ea4a681d Don't assume that we are the PCI host. Actually check, and make sure that 
we set things up so that we can run either as a PCI host or as a PCI slave
(working within the PCI BARs that the system BIOS has configured for us).
 2003-09-12 04:39:59 +00:00
briggs
38da12464f We need a little more symtab space. 2003-09-11 22:52:38 +00:00
thorpej
62a064e24e Bump initial kernel PTs to 4. 2003-09-09 20:42:38 +00:00
rearnsha
5d78bf50ac ANSIfy. 2003-09-06 13:34:29 +00:00
rearnsha
81594136ec irqhandler.h and related baggage now obsolete. 2003-09-06 13:01:29 +00:00
rearnsha
3a05158011 Remove include of ifpga/irqhandler.h. 2003-09-06 12:58:48 +00:00
rearnsha
9066202e72 Delete GENASSYM_EXTRAS. 2003-09-06 12:57:22 +00:00
rearnsha
b548db6846 Obsolete. 2003-09-06 12:36:29 +00:00
rearnsha
8395e3535e config option is now CPU_ARM10. 2003-09-06 11:41:11 +00:00
rearnsha
256da36a1c Switch to using generic soft interrupts. 2003-09-06 11:31:20 +00:00
rearnsha
fec013d595 Fix incorrect definition of IFPGA_SC_LBFCODE_BEN1 and missing 
definition of IFPGA_SC_LBFCODE_BEN0.
Add definitions for unused interrupt bits and a suitable mask (preparation
for switch to generic soft-ints code).
 2003-09-06 11:27:01 +00:00
rearnsha
333d22f36e Fix handling large values of delay when the timer might wrap. 2003-09-06 11:21:44 +00:00
rearnsha
7c9aacc774 Add bouncing support 2003-09-06 11:12:53 +00:00
rearnsha
a25a2641d9 General cleanups of the bootstrap code 2003-09-06 10:57:12 +00:00
rearnsha
b867034038 When an Integrator board has less than 256M of SDRAM fitted, the 
memory that is "obscured" by the SSRAM is visible at a wrapped address.
So we can use the full amount of SDRAM in almost all cases.
 2003-09-06 10:28:26 +00:00
rearnsha
15f5c8f7db Remove a verbose-boot message that kills the bootstrap (since the 
console port mapping has just been moved).
 2003-09-06 10:21:19 +00:00
rearnsha
0663dd6d22 The third argument to pmap_map_chunk is the pa not the va. 2003-09-06 10:18:07 +00:00
rearnsha
20b73e2b48 Add a flags field to _PhysMem structure so that we can describe 
attributes of memory regions (BOOT_DRAM_CAN_DMA, BOOT_DRAM_PREFER).
Rearrange order of BootConfig members so that the describing how many
dram regions we have preceeds the descriptions of each region.
 2003-09-06 10:08:13 +00:00
rearnsha
d35277ea35 Default all builds to not have debug information. Significantly 
reduces disk space needed for a make release, especially if using
dwarf2 debug.
 2003-09-06 10:00:51 +00:00
mycroft
9b3ff19873 Whoops, reenable some stuff. 2003-09-03 03:19:04 +00:00
mycroft
7929022703 Add gzboot support for SMDK2410. 2003-09-03 03:18:30 +00:00
mycroft
56cdfe0eab GC a bogus variable that was causing link failures with PCMCIA. 2003-09-03 03:17:22 +00:00
bsh
43f6db1ea7 support CS8900A ethernet on SMDK2410. 
XXX: SMDK2410 has no EEPROM connected to CS8900A. Currently the only
     way to set MAC address is give it via kernel config option.
 2003-08-29 13:54:03 +00:00
bsh
b0c5091bcb tweak memory controller on startup for CS8900A at CS3 and CL-PD7610 at 
CS2.
 2003-08-29 13:46:38 +00:00
bsh
2a0faa1f10 change CPU clock to 200MHz at kernel startup. 2003-08-29 12:42:13 +00:00
bsh
e979aaa6ea add option SMDK2XX0_CLOCK_CONFIG to change CPU clock at kernel startup. 2003-08-29 12:41:12 +00:00
bsh
1f218a14c4 fix a comment. 2003-08-29 12:07:33 +00:00
bsh
13543d215c move some definitions of register block size from s3c24[10]0reg.h 
to s3c24x0reg.h when they are same for S3C2410 and 2400, and rename them as
S3C24X0_FOO_SIZE.
 2003-08-27 03:46:05 +00:00
bsh
e1cdd07843 use CLZ insn to find a pending interrupt. 2003-08-12 08:24:04 +00:00