Update coda to new struct lock in struct vnode.
make fdescfs, kernfs, portalfs, and procfs actually lock their vnodes.
It's not that hard.
Make unionfs set v_vnlock = NULL so any overlayed fs will call its
VOP_LOCK.
the functionality of nullfs. The latter is now just a mount & unmount
routine, and a few tables. umapfs borrow most of this infrastructure.
Both fs's are now nfs-exportable.
All layered fs's share a common format to private mount & private
vnode structs (which a particular fs can extend).
Also add genfs_noerr_rele(), a vnode op which will vrele/vput
operand vnodes appropriately.
RAIDframe driver to stop it from eating too much kernel memory when
writing data. But that fix had a nasty side-affect of hurting write
performance (*much* more than I thought it would). These changes nuke
that "fix", and instead put in a more reasonable mechanism for limiting
the number of simultaneous IO's which can be happening for each RAID device.
The result is a noticeable improvement in write throughput. The End.
struct lock. Will permit layered fs's to share locks with underlying
vnodes.
Also reduce the max # of vnodes passable in a VOP from 16 to 8. As the
most we pass is 4, this shoudn't be a problem. In addition to WILLRELE
flags, add WILLUNLOCK flags to indicate that the VOP will unlock the
vnode. Add WILLPUT flags (WILLUNLOCK | WILLRELE) to indicate that the
vop will vput the passed-in vnode.
and has unlocked the parrent vnode. Should only actually be returned if
the fs needs to unlock the parrent and has difficulty re-locking the
parrent. Needed so that layered fs's can keep track of locking.
pages.
XXX This should be handled better in the future, probably by marking the
XXX page as released, and making uvm_pageunwire() free the page when
XXX the wire count on a released page reaches zero.
* Implement MADV_DONTNEED: deactivate pages in the specified range,
semantics similar to Solaris's MADV_DONTNEED.
* Add MADV_FREE: free pages and swap resources associated with the
specified range, causing the range to be reloaded from backing
store (vnodes) or zero-fill (anonymous), semantics like FreeBSD's
MADV_FREE and like Digital UNIX's MADV_DONTNEED (isn't it SO GREAT
that madvise(2) isn't standardized!?)
As part of this, move the non-map-modifying advice handling out of
uvm_map_advise(), and into sys_madvise().
As another part, implement general amap cleaning in uvm_map_clean(), and
change uvm_map_clean() to only push dirty pages to disk if PGO_CLEANIT
is set in its flags (and update sys___msync13() accordingly). XXX Add
a patchable global "amap_clean_works", defaulting to 1, which can disable
the amap cleaning code, just in case problems are unearthed; this gives
a developer/user a quick way to recover and send a bug report (e.g. boot
into DDB and change the value).
XXX Still need to implement a real uao_flush().
XXX Need to update the manual page.
With these changes, rebuilding libc will automatically cause the new
malloc(3) to use MADV_FREE to actually release pages and swap resources
when it decides that can be done.
* Nothing currently uses this return value.
* It's arguably an abstraction violation.
Fix amap_unadd()'s API to be consistent w/ amap_add()'s: rather than
take a vm_amap * and a slot number, take a vm_aref * and an offset.
It's now actually possible to use amap_unadd() to remove an anon from
an amap.
> XXX (in)sanity check. We don't do proper datasize checking
> XXX for anonymous (or private writable) mmap(). However,
> XXX know that if we're trying to allocate more than the amount
> XXX remaining under our current data size limit, _that_ should
> XXX be disallowed.
This is one link on the chain of lossage known as PR#7897. It's
definitely not the right fix, but it's better than nothing.
sub-structure malloc() failed, it was quite likely that the function
would return success incorrectly. This is this direct cause of the bug
reported in PR#7897. (Thanks to chs for helping to track it down.)
for the protocol in the specified packet.
Fix statistic gathering to not make bogus increments of ips_delivered and
ips_noproto for cases where rip_input() is called by a protocol handler
(such as icmp_input or igmp_input) which has already processed the packet.
Fix and document naming convention for vnode variables (always use
lvp/lvpp and uvp/uvpp instead of a hash of cvp, vpp, dvpp, pvp, pvpp).
Delete old stale #if 0'ed code at the end.
Change error path code in getcwd_getcache() slightly (merge common
cleanup code; shouldn't affect behavior any).
shutdown:
During an unmount, wake up all the processes which are waiting to lock
the socket for receive, and wait for them (and the process blocked in
soreceive, if any) to go away before blowing away the socket and the
mount structure.
mp->mnt_flags & MNT_MWAIT is replaced by mp->mnt_wcnt, and a new mount
flag MNT_GONE is created (reusing the same bit).
In insmntque(), add DIAGNOSTIC check to fail if the filesystem vnode
is being moved to is in the process of being unmounted.
getnewvnode() now protects the list of vnodes active on mp with
vfs_busy()/vfs_unbusy().
To avoid generating spurious errors during a doomed unmount, change
the "wait for unmount to finish" protocol between dounmount() and
vfs_busy(). In vfs_busy(), instead of only sleeping once, sleep until
either MNT_UNMOUNT is clear or MNT_GONE is set; also, maintain a count
of waiters in mp->mnt_wcnt so that dounmount() knows when it's safe to
free mp.
tested by running a "while :; do mount /d1; umount -f /d1; done" loop
against multiple find(1) processes.
addressed, the culprit being the lack of a namespace definition for an IPv6-
extended <netinet/in.h> in XNS5.2 D2.0; I'll try to work something out and
submit it to the review WG.
* not declare struct sockaddr_storage in pre-XNS5.2 D2.0 environments, and
* not use __{BEGIN,END}_DECLS in a _KERNEL environment, which is not necessary.
changed most of the spl* to use _splraise to match current usage
this fixes an observed bug where zstty_attach was calling splzs causing
interrupts to be turned on prematurely.
(Sorry for a big commit, I can't separate this into several pieces...)
Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details.
- sys/kern: do not assume single mbuf, accept chained mbuf on passing
data from userland to kernel (or other way round).
- "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ
package (ftp://ftp.csl.sony.co.jp/pub/kjc/).
- sys/netinet/tcp*: IPv4/v6 dual stack tcp support.
- sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those
file to be there so we patch it up.
- sys/netinet: IPsec additions are here and there.
- sys/netinet6/*: most of IPv6 code sits here.
- sys/netkey: IPsec key management code
- dev/pci/pcidevs: regen
In my understanding no code here is subject to export control so it
should be safe.
listen/accept (PR_LISTEN flag in protosw) and detect obvious faults in
parameters passed. It is still possible for the address used for copying
the socket information to become invalid between that check and the copyout
so close the connection's allocated fd if the copyout fails so that we can
return EFAULT without allocating an fd and the application not knowing about
it. Ideally we'd be able to queue the connection back up so a later accept
could retrieve it but unfortunately that's not possible.
Not doing this caused packets to be read into memory somewhere after the
kernel was started but before the device was probed, normally in the
system page table. This gave quite unpredictable results...
- remove "need-flag" for mac68k esp driver, as it is not used in anywhere
and conflicts with IPsec ESP header.
This should be the only MD change in IPv6 support, except kernel config file.
Very sorry if you have any compilation problem with it (I believe it is okay).
If your favorite arch is not included in here, please add a
call to ip6intr() from softintr handle.
- Add initial IOP support. ADB doesn't work yet for me, but it's here so
that others will be encouraged to work on it. ADB_HW_IOP basically
is configured as a NOP so that serial consoles will continue to work.
- Roll via1_intr and via2_intr into the intr.c scheme--this also required
changing rtclock_intr to grovel the stack differently so that hardclock
gets the right arguments and softclock() doesn't get all reentrant.
- Make via1 interrupts parallel to via2 interrupts--handlers get a pass-
through pointer and we can register handlers. Register via1 interrupt
with intr_establish()--normally level 1, level 6 for A/UX scheme.
- Use intr_establish() to set real via2 interrupt handler instead of the
hacked function pointer.
- Reorganize adb-direct interrupts so that a function call is removed.
- Implement A/UX interrupts for all Quadras right now. We may need to
special case some Quadras, but Linux folks are reporting success on
several models.
- Fix intrnames to be accurate for the normal, PSC, and A/UX interrupt
configurations.
mode. On this chip, we need to access some registers to set the text plane,
which messes up the graphics setup.
This should fix the grf3 problems reported by several people.
Michael Hitch and Joerg Lehners analyzed the problem and provided the fix.
these and pass as the first parameter of ddb_init(). We used to pass
the contents of the start of the symbol table cast to an int, which for
an ELF kernel is "0x7f ELF" - not quite the symbol table size! How this
used to ever work I dunno...
address zero of each net/subnet is a broadcast address.
(The default value is nonzero, which preserves the current behavior).
This can be set using sysctl; the boot-time default can also be
configured using the HOSTZEROBROADCAST kernel config option.
While we're here, defopt HOSTZEROBROADCAST and SUBNETSARELOCAL
element access instead of C bitfield (hello, BCPL).
- XXX Some TURBOchannel framebuffers might need shutdownhooks(). It
seems not necessarily hardware sprite cursor images are re-initialized
by DECstation PROMs upon exits from kernel.
- XXX It'd be an arguable point to allow user programs to change the
shade of gray freely for pixel value 0 and 1.
false matches on controllers which properly respond to a WDCC_RECAL command.
Should close PR port-i386/7702 (the author tested this patch, and said it
solves his problem).
return 0 instead of EINVAL. In this case, there will only be one media
type, and the upper-level if_media code will ensure that the user is
setting to that type.
This matches changes Jason made a while back to sys/dev/ic/lance.c
