but is a marked improvement. This takes advantage of a pseudo-DMA hardware
hack of Apple's that exposes a 16-bit register that the Apple-designed
memory controller acts like a DMA controller and handshakes into or out
of the FIFO. Wierd.
Unfortunately, there does not seem to be a good way to determine what
variety of comm-slot card is present in a machine. There is still an
interrupt issue preventing these cards from working--hopefully that will
be ironed out shortly.
internal ethernet on the Quadra/Centris 660av/840av.
Add initial support for the PSC (DMA controller) to support the above
(DMA SCSI remains unsupported). This involved also changing the way
that several interrupts are handled.
Above from David Huang <khym@bga.com>
Since the interrupts changed somewhat, we must also make the ipls
dynamic, defaulting to their prior levels and adjusted for the AVs.
I modelled this on the hp300.
(mrz5149@cs.rit.edu) for the addresses and hints as to how the interrupts
might be disabled, and thanks to Henry Hotz (h.b.hotz@jpl.nasa.gov) for
testing on the 840AV.
Unmap the DAFB regs on the other Quadras after attachment. They're not
used.
Define a constant for the SuperMac Spectrum/24 series III display card.
Thanks go to Luca Falzoni <falzoni@jetai.unipv.it> for trying out the
code for the Dayna ethernet support.
$Fssxxxxx 1MB slot space documented in the old Inside Macintosh, or the
$Fs0xxxxx 1MB slot space documented in the new IM and Guide to Macintosh
Family Hardware.
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
(address error faults), as well as other reported problems:
- Simplify grfmv_phys() to work like grfiv_phys(), and eliminate the
second argument to both, as we don't use it anyway.
- Handle fbbase and fboff consistently throughout. Closes PR 3862.
- Eliminate grfaddr() by pulling it into grfmmap(), which is the
only place it was used, previously.
- grfmap() now gets the physical address of the framebuffer from
the appropriate driver, rather than try to compute it by itself.
Be careful with aligning the base to a page address and increase
the length of the mapped region appropriately. Closes PR 2867.
the pc532/dev/ncr.c-inspired changes; in particular, wait for previous
transfer to complete before starting another, as we used to do. Retain
splbio() protection and simplified sbc_pdma_in().
Simplify the way transmit buffers are managed, remove assumptions about
NBPG, simplify sonic_get handling, update snioctl to be more like other
current drivers, and probably a few other changes I've now forgotten about.
our MD bus_space_probe() extension). This has several side effects:
- NuBus drivers must map and unmap slot space, rather than relying
on this happening before they are attached.
- Functions exported to NuBus drivers from nubus.c now need to be
supplied with a bus space tag/handle pair.
- Old bus map/peek functions can be garbage collected, as can pmap
support for the same.
Because of some current limitations of the bus space specification, we
are violating the abstraction in grf_mv (NuBus grf driver). All such
violations are clearly marked /* XXX */, and must be addressed when
the specification is updated.
- Remove unused `register' modifier on declarations
- Reverse the sense of some tests to make the code more clear
- Type casts per KNF
- Move a static variable into the only function that uses it (perhaps
we can eliminate it entirely, someday?)
Change in the way receive buffer areas are handled. Before we gave
the chip 16 buffers, each 1536 bytes (big enough for one packet).
Now we're handing the chip 8 buffers, each 4 Kbytes, and letting
the chip fit as many packets as it can in each one. This should
help keep it from running out of buffer space. Also make some of
the performance-crucial routines inline. It made no measurable
difference except to make me feel better
Changes from Bob Nestor <rnestor@metronet.com> to get closer to support
for his Apple SONIC-based nubus card.
Changes from me to try to get SONIC's MAC address from MacOS settings if
we can't read the PROM space.
driver. Major highlights:
- Protect with splbio(), now that interrupts from the chip might be
enabled by default;
- Wait for current transfer to complete before returning, rather than
wait for previous transfer to complete before starting another;
- Instead of logging a "timeout" message when a target disconnects,
just return, letting the sbc_ready() and sbc_wait_not_req() print
timeout messages if such really did occur.
With interrupt changes to sbc_obio.c, disconnect/reselect now works if
configured into the kernel.
present and initialize a few things. No color support, yet.
- Properly disable interrupts for DAFB.
- Rearrange for better nubus display card interrupt support. Only register
an interrupt if we know how to clear it.
- Complain if we don't know about a given display card and can not install
an interrupt handler.
- Change MYSTERY stuff to cb264--still need to get the DrSW so we can
actually call the routine to clear an interrupt from this card.
tweaks and bug fixes by yours truly.
Here's what Denny had to say:
nubus.h:
- add a drsw entry for my card
[ I also added a couple of constants for more display cards ]
if_sn.c:
- allocate sc->space using malloc (Scott wanted this).
- make csr accesses use NIC_PUT/GET, remove sc->sc_csr.
- add multicast and IFF_PROMISC support. multicast isn't
well tested, but I made sure the unicast case still
works.
- finish the new arp interface, remove sc->sc_enaddr
if_snreg.h:
- remove struct sonic_reg
if_snvar.h:
- add NIC_PUT and NIC_GET macros a la if_ae
- remove sc_txhead, it isn't used.
if_sn_nubus.c:
- clean up support for my SE/30 card.
- Move add_nubus_intr from if_sn.c (to keep if_sn.c MI)
if_sn_obio.c:
- make Q610, C610, Q650, C650, Q800 use EXBUS.
- PB500 had a "return" where "break" was intended. PB500
probably wasn't working.
- move add_nubus_intr from if_sn.c.
- add an "explanation" why Apple's ethernet addr is encoded
in token ring format in the PROM.
- Indent some comments appropriately per KNF.
- Output all diagnostics using the device name rather than a static string.
- Fix a (mostly marmless) bug in snintr(), where loss of heartbeat wasn't
properly ignored and could mask the `receive descriptors exhausted'
diagnostic.
- Use more consistent and portable types in the softc.
- Map registers using an array of bus_size_t offsets, and set up the
mapping in the attach code (thanks to Jason Thorpe for suggesting
this!).
- Disable the ae-specific watchdog, which is no longer necessary in
the general case.
Still remaining: split out functions used to copy data to/from the
card, and retain a way to have a local driver name with the MI code.
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
determine whether there was an error (if so, we unmap the slot space
for this device). Use this functionality to tell the attach function
that we couldn't clear the card's buffer.
Also in aesetup(), eliminate the bogus repetition of the error message
we print when the buffer clear actually fails. Noticed by Hauke Fath.
and allow the attach function to override the default watchdog. Also,
do some minor cosmetic surgery (rename bus space tags/handles and some
KNFing I missed the first time around).
- extdms_done is modified by things outside of our direct control;
it needs to be declared `volatile'
- CountADBs() fails when we call it the second time. We can work
around this by telling extdms_init() how many ADB devices we have,
only calling CountADBs() once.
indirect bus code framework) from Jason Thorpe. This allows us to dump
bus_scan() and bus_print(), and move bus_peek() and bus_mapin() to the
NuBus code (since they'll eventually go away, anyway).
second argument. The NuBus autoconfig code had to be reorganized as a
result of this, and looks much more like a directly-attached bus now.
These changes eliminate __BROKEN_INDIRECT_CONFIG.
to initialize conspa was invalid on non-040 machines, since we don't
know which MMU we're using on those, yet. On the other hand, by the time
we get to check_video() on the 040 machines, the MMU has been disabled.
Compromise: get the video PA in setmachdep() on the 040, and in
check_video() on the others. (This is not optimal. *sigh*)
- Add reset attribute sequences for bold, underline, and reverse
- Add insert/delete line sequences
- Recognize but ignore G0/G1 character set sequences
Performance:
- Speed up clear_line() when clearing the entire line
Also, some stylistic changes for checking/setting scroll region bounds
and in putc_getpars().
These changes make the ITE work properly with the 1.2 termcap file.
have an Apple Sound Chip. Make sure that we have configured the device
before allowing accesses to ASC memory. Among other things, this
prevents the 660AV and 840AV from getting a kernel bus error when trying
to beep on the console.
instead of 0x400.
- Restructure interrupt handling for more performance--continue to
read/write data as long as the device keeps us in a data xfer phase.
There is still a lot of room for speed improvement here. Perhaps it
lies is speeding up the interrupt path in general?
some guesses for the machines that have two of these buggers (I don't have
such a machine). This driver is a copy of the sparc/alpha esp with a
minimum of changes--after we get it performing a bit more respectably,
we should see about re-normalizing the sources.
immediately reasserted before we get a chance to process the interrupt,
we can inadvertantly get stuck with zs_tx_stopped set. Move the delta
detection to the hard zs interrupt handler; the softint handler
will notice that something has happened with CTS and restart the
transmitter if it's asserted.
force a drop to the system debugger. WARNING: this used to be the
default behavior! Modify custom kernel configs accordingly.
- Check for ZS_HWFLAG_CONABRT in zs_abort(), and don't abort if it's
not set.
multi-channel driver), or to SCSI_CHANNEL_ONLY_ONE if a
single-channel driver.
(2) use scsiprint() rather than a locally-defined autoconfig print
function, and kill any locally-defined print function.
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
one pending before we clear the interrupt flag. This avoids a condition
where the line appears to go catatonic (which is particularly easily
triggered by pppd). From Bill Studenmund <wrstuden@loki.stanford.edu>.
XXX - we should probably log this if it gets excessive.
