6859233343
bcopy is dead on i386. the one use left in the kernel was in locore.s
...
itself, and that got replaced with a call to memcpy. Ross deserves
most of the credit.
note that if you've seen bcopy elsewhere in the kernel, systm.h
defines it as a macro...
2001-05-16 22:09:36 +00:00
90cabee3fb
Per helpful suggestion from LukeM- make INLINE usage consistent (and
...
use correct __inline format).
2001-05-16 21:41:52 +00:00
8e532c1ad1
Make sure to allocate big enough mbuf data area before elevating
...
interrupt priority, to avoid allocating additional mbufs on
splsched(). Move some other misc bits out of splched()-guarded
section. This should make the code a bit more friendly wrt e.g.
clock interrupts. Sligh performance improvement was observed with
this change (like 1-2% on slow machine), even.
This also fixes ancient kern/2478 by Bill Sommerfeld.
2001-05-16 20:30:52 +00:00
c22fb1db55
Finally nobble the bus_dmamap_sync() problem with osiop(4).
...
Basically, bus_dmamap_sync() `PREREAD' needs to flush the cache
for the start and end of the region if it is not aligned to
a cacheline boundary, otherwise a subsequent POSTREAD can *purge*
valid data which was in the cacheline but *outside* the region
passed to bus_dmamap_sync().
Bus snooping doesn't always help here because osiop(4) calls
bus_dmamap_sync() with POSTREAD even if no data was actually
transferred! (And we can't rely on snooping on the 68060 models anyway).
2001-05-16 19:06:46 +00:00
35f2b9136a
get up-to-date (cleanup, get rid of vm_offset_t)
2001-05-16 18:50:52 +00:00
2df9b8f13f
get up-to-date (cleanup, splimp->splvm)
2001-05-16 18:49:51 +00:00
038ce6b8af
get up-to-date (sprinkle pmap_update())
2001-05-16 18:49:05 +00:00
26085708d5
get up-to-date (get rid of vm specific error codes, sprinkle pmap_update())
2001-05-16 18:48:21 +00:00
29182d41aa
get up-to-date (splimp->splvm, cleanup, sprinkle pmap_update())
2001-05-16 18:47:04 +00:00
96a430ba30
If _SOFT_FLOAT is defined, pull floating point va_args from the GPR
...
area and not the FPR area (by having the double argument type test
always fail).
Fixes problems using <stdarg.h> with -msoft-float.
2001-05-16 15:41:03 +00:00
38e4ed8f09
Pass -D_SOFT_FLOAT to cpp if called with -msoft-float.
2001-05-16 15:36:47 +00:00
9c23ab2d54
Add "switch to ELF".
2001-05-16 15:01:40 +00:00
8a78799bf4
support BUFFALO AirStation WLI-PCM-S11
...
this card are PRISM2.5 card.
2001-05-16 14:33:21 +00:00
4802a48290
PR/12956: Grant Beattie: Explain how to copy the timezone files so that
...
programs run in the proper timezone
2001-05-16 14:27:58 +00:00
3c3caa0eb2
don't generate opt_spec_platform.h
2001-05-16 14:26:40 +00:00
c6da2452c0
Put back /usr/include/dev/tc/sticreg.h.
2001-05-16 13:48:52 +00:00
25221c413e
regen
2001-05-16 12:57:55 +00:00
4c575cc65b
add product
...
BUFFALO AirStation 11Mbps WLAN Card
2001-05-16 12:57:27 +00:00
cbcd644ce8
sigreturn() fix (from kleink)
2001-05-16 12:42:38 +00:00
3f76420b8a
Fixed wrapping of multiline fields.
2001-05-16 11:51:16 +00:00
43923690d3
Add an entry for Victor MP-C303.
2001-05-16 11:13:20 +00:00
389aaa8b08
Regen.
2001-05-16 11:06:27 +00:00
7cd4cb0d25
Define platid for Victor InterLink MP-C303
2001-05-16 11:04:57 +00:00
9b368d61a4
Add AirMac frontend.
2001-05-16 10:56:42 +00:00
fb619e9a70
Calc. cpu speed for VR4122.
2001-05-16 10:49:18 +00:00
eef5fa50d3
Big-endian support.
2001-05-16 10:45:36 +00:00
cfc3edb550
remove some debugging leftovers.
2001-05-16 08:45:50 +00:00
2f39ebba50
Victor MP-C303 uses 4k pagesize. So, ask system instead of hardcoding it.
2001-05-16 08:40:51 +00:00
422ad4763b
The lower bound for getPage is _addr_table_idx, not 0.
2001-05-16 08:37:44 +00:00
679894e9ae
Add missing close paren in message.
2001-05-16 08:19:42 +00:00
aa09aa91c7
Search the entire device-space of bus 0 if the router device
...
address is set to 000:00:0, and the compatible router entry
is undefined.
Patch PR port-i386/12880 by Dave Sainty <dave@dtsp.co.nz>.
2001-05-16 08:10:36 +00:00
8406481cd3
Regen.
2001-05-16 07:53:54 +00:00
15833cae3b
add prism chip identity, Prism2 with SST flush.
2001-05-16 07:53:28 +00:00
7cab6084a4
Fix errors in previous commit:
...
- forgot PCI bus
- forgot pckbd config
2001-05-16 07:50:29 +00:00
e58d00a406
Use relative path for symlink target so that it won't point outside of tree.
2001-05-16 07:09:26 +00:00
ff47810d07
fix previous delint
2001-05-16 06:29:01 +00:00
c45b32243a
Add a VAXANY type. Eventually to used in INSTALL / GENERIC to easily
...
include support for all VAX platforms
2001-05-16 05:36:53 +00:00
4201bf1ae0
nuke bcopyw and bcopyb. It is unclear what they were for, and nothing
...
called them.
2001-05-16 05:01:28 +00:00
c15945130c
delint: remove unnecessary assignment to same objection (hidden in #define)
2001-05-16 04:50:11 +00:00
be493349d2
delint: zero sized array initalisation is a gccism
2001-05-16 04:39:03 +00:00
927097774a
delint: remove volatile from fxp_mdi_read() decl
2001-05-16 04:20:55 +00:00
e266791dab
Add a couple of include LINTSTUBs and fix some LINTSTUB prototypes.
...
Still exits hard because of bcopy/memcpy problem, but that is a
legitimate problem. bcopy should go and be replaced with memcpy to fix this.
2001-05-16 04:18:52 +00:00
4be93c9ed7
Add a /* LINTSTUB: include <foo.h> */ mechanism.
2001-05-16 04:17:04 +00:00
b81e69fa8e
beginning basic 2300 infrstructure support
2001-05-16 03:58:34 +00:00
bf16779f43
allow long typed functions
2001-05-16 03:58:14 +00:00
9f2c2c7a8c
Keep up with the Joneses.... further synchronization for the eventual
...
implementation in NetBSD for target mode.
2001-05-16 03:58:03 +00:00
73eba1a839
Long overdue- put locks on the usage of the mailbox command stuff. This
...
keeps us from stomping on ourselves.
Say we're in the middle of re-evaluating a loop (and sleeping) when a
command completes, or a timer refires, and this *other* thread decides
*it* wants to start re-evaluating the loop. Bad news.
We have to be a bit careful- if we can't acquire the MBOX semaphore at
interrupt level, we will simulate a host interface error. This is a bit
of a temp workaround. There's some work underway driven by a NetBSD
commercial user that will try and force most mailbox stuff into a
part A/part B interrupt driven model.
2001-05-16 03:55:15 +00:00
2ce3ea6b4e
systm.h says these take const void * parameters
2001-05-16 03:54:24 +00:00
6aea3cdfa2
fuword returns a long, according to systm.h
2001-05-16 03:52:58 +00:00
a1dd9d78ee
It's 'role None', not 'role No'.
...
Also, pay attention to the difference in the ISPASYNC_CHANGE_NOTIFY
between loop and fabric changes.
2001-05-16 03:52:10 +00:00
perry