e2a320f925
Oops, fix Winbond regshift.
1999-09-14 05:59:53 +00:00
12c167b5ca
Change the semantics of `sc_regshift'; it is now the shift required to
...
make a CSR index number into a CSR offset. Introduce a couple of macros
to handle CSR name -> offset conversion.
1999-09-14 05:52:21 +00:00
10d4a4d5fe
And commit two files I forgot in the rearrangement for testing for
...
interrupt context.
1999-09-14 01:07:13 +00:00
a03bd733ca
- More PNIC NWAY stuff. Still more work to do, here.
...
- Fix the SROM checksum routine.
- Add code to parse the old DEC Address ROM SROM format.
- Rearrange the statchg routines a bit, to make them consistent with one
another.
- Add support for the DECchip 21040. XXX No support for media autosense
yet, and no support for any of the multi-port boards yet.
1999-09-14 00:55:38 +00:00
203f000d1a
Regen.
1999-09-11 06:27:36 +00:00
dfbe7449e4
Add ENI SpeedStream.
1999-09-11 06:27:25 +00:00
6a58ae2d93
Regen.
1999-09-10 19:56:51 +00:00
fb9d7d86ae
Add more TI CardBus bridges. Taken from the CardBus patches.
1999-09-10 19:55:54 +00:00
a10045109d
Add chip types for several more Tulip clones (ASIX, ADMtex, PNIC II, Davicom),
...
and match the Compex RL100-ATX; it uses the Winbond 89C840F (RL100-TX is
a Macronix 98713).
1999-09-08 22:29:46 +00:00
e0c4f8ff92
Regen.
1999-09-08 22:25:56 +00:00
dfdd1affb4
Add some more Tulip clones.
1999-09-08 22:25:19 +00:00
ab08b6b863
Update for Lite-On product ID change.
1999-09-08 21:42:44 +00:00
ab7310ed6e
Regen.
1999-09-08 21:39:54 +00:00
9bb30be866
Add Davicom Semiconductor vendor ID, and Davicom DM9102 10/100 Etherent
...
product ID (Yet Another Tulip Clone).
1999-09-08 21:39:24 +00:00
187510560e
Regen.
1999-09-08 21:34:33 +00:00
46e11c9fd8
LITEON_PNIC -> LITEON_82C168
1999-09-08 21:33:59 +00:00
e1766aacfa
Make sure not to use the io handle before it's been initialized.
1999-09-04 22:00:32 +00:00
6a2319b969
Byte swap the EEPROM words on the PNIC. From Stephen Ma.
1999-09-03 00:24:56 +00:00
533b6088cd
Make it compile.
1999-09-02 23:23:03 +00:00
9c10799ac4
Use the approximated sampling rate to compute the filter rate.
1999-09-02 17:26:15 +00:00
a6aa19699f
Don't assume that an -FX card has MII (because it doesn't).
1999-09-01 20:26:43 +00:00
480e8a1a1c
No longer requires mpuvar.h.
1999-09-01 18:03:10 +00:00
ce80d27933
Don't try to unmap unmapped space in case of failure in
...
pciide_mapregs_compat(). From OpenBSD.
1999-09-01 15:17:07 +00:00
7c34574b94
add "ti" - Alteon Gigabit Ethernet
1999-09-01 11:54:32 +00:00
45e5d743af
quick 'n dirty port of FreeBSD's Alteon Gigabit Ethernet driver.
...
todo:
-IPv6
-clean up jumbo buffer allocation - NetBSD provides an opaque argument
to the free function, thus doesn't need the hack done here
-deal correctly with the mapping of the shared memory
1999-09-01 11:47:46 +00:00
7eaa4e57fd
regen
1999-09-01 11:42:32 +00:00
7c2d8bc001
-add some incarnations of the Alteon gigabit Ethernet adapter
...
-sort some entries which were put in by legasthenics
1999-09-01 11:40:42 +00:00
e5d76dce61
Don't make a human-readable device description being printed at attach time
...
depend on PCIVERBOSE.
1999-09-01 07:32:31 +00:00
e293024ffa
This is the long-awaited "new Tulip driver", a complete, from-scratch
...
rewrite of the driver for the DECchip 21x4x Ethernet chips, and a variety
of clones.
Currently, the driver supports the Winbond 89C840F (this works pretty
well), and the Lite-On PNIC (e.g. NetGear PCI boards), however Lite-On
support may be broken [I may simply have a busted test board].
Eventually, support for the Macronix and ASIX chips will filter into
this driver, and then, slowly, support for the genuine DEC chips,
and maybe even the DE-425 EISA model.
1999-09-01 00:32:41 +00:00
8e49b58de0
Add support for Intel 810 chipset (ICH/ICH0).
...
While I'm there merge back piix_channel_map into piix_chip_map.
1999-08-30 12:49:21 +00:00
52068f73ce
Add support for the Promise Ultra/33 and /66 pci IDE controller. In addition to
...
chip-dependant code this required the following changes:
- Instead of attaching the device in a generic way with some chip-dependant
routines, use a chip-dependant attach routine with some common code
factored out. The code is marginally bigger, but this allows the CMD64x
flag hack to go away.
- For chips that report per-channel 'irq triggered', test this before calling
wdcintr() for the native-pci irq case (compat intr can't be shared),
as wdcintr() has no good way to know if a irq was for it or not, and
ends up with irq loss. XXX for chips that don't have this feature irq sharing
will not work properly !
- add my copyrigth notice (could have been done some time ago I think :)
There are still some issues to be solved with the Promise controller and
ATAPI devices.
Many thanks to Paul Newhouse for shipping me 2 Ultra/33 boards for doing this
work.
1999-08-29 17:20:10 +00:00
4819ee1cf1
Add definitions of the DMA mode control registers. They should be used
...
by pciide, but I have yet to find how to map them.
1999-08-29 17:06:43 +00:00
64c7328230
Regen.
1999-08-28 09:22:58 +00:00
d0fbee34df
Add a bunch of i810 devices. From Paul Shupak <paul@plectere.com>.
1999-08-28 09:18:08 +00:00
299c0b1d83
Regen.
1999-08-27 23:27:39 +00:00
e1b0108ce6
Add Samsung Semiconductor KS8920 10/100 Ethernet.
1999-08-27 23:25:36 +00:00
aa550d38fb
Regenerate.
1999-08-24 21:32:25 +00:00
fa181849a2
Add Intel i740.
1999-08-24 21:32:04 +00:00
5d8adfb5a2
Disable interrupts early.
1999-08-21 21:35:36 +00:00
be5fe633b8
clean up attach messages slightly.
1999-08-20 03:36:59 +00:00
fd59bba7cb
after bus_dmamem creating some memory, zero it out. This has stopped
...
my alpha from getting COMMAND FAILED on random boots.
1999-08-19 00:43:45 +00:00
f61d8fd937
regen
1999-08-17 09:42:14 +00:00
c8aabedc83
-mention a location where the old PCI database can still be found
...
-add Alteon Gigabit Ethernet
1999-08-17 09:40:25 +00:00
03946f957a
Added Solidum Systems PCI vendor ID and Device IDs
1999-08-16 21:36:39 +00:00
48f055e09b
Add missing MPU interrupt glue.
1999-08-14 22:42:16 +00:00
7b34e008a9
Forgot to initialize a pointer; from Simon Burge.
1999-08-14 15:05:02 +00:00
4882320d4b
Initialize error variable. Should fix spurious init errors.
...
From Dave Huang in PR 8205.
1999-08-14 11:23:39 +00:00
af827a1284
Remove dulicate "Ethernet" output. From Dave Huang in PR 8206
1999-08-14 11:09:18 +00:00
59af828a94
Regen.
1999-08-12 09:43:18 +00:00
7c3cb9c796
Add Promise Ultra66, change entry of Ultra33 to reflect the fact that can
...
"only" do ultra/33.
1999-08-12 09:42:11 +00:00
439a6c4942
Add missing prototype for read_tekram_eeprom() to make driver compile if
...
"options NCR_TEKRAM_EEPROM" is specified in the kernel configuration file.
Patch supplied by Hans Hoppe in PR kern/8141.
1999-08-04 20:51:31 +00:00
4bd8f1566c
Be a little nicer about memory usage:
...
* Don't allocate receive buffers until the interface is actually brought
up, and release all of them if the interface is taken down.
* Add a knob (defaults to off) which will copy an incoming packet to
a single header mbuf if it is small enough to fit in one, rather than
burning an entire cluster on it. Note that this change will be mostly
moot if/when sbcompress() it changed to handle compressing clusters.
1999-08-03 17:25:51 +00:00
dbb71e4b35
Add the file I forgot at the previous MPU changes.
1999-08-03 00:27:27 +00:00
42fb510148
Move the mpu device declaration to conf/files.
...
Let the mpu device attach at the sb device, and then midi at the mpu.
Update the mpu at eso attachment.
1999-08-02 17:37:41 +00:00
cbf1f6f1b9
Move the MPU driver isa/ to ic/.
...
(I didn't move it in the repository because the revision history
is very short and uninteresting. :)
1999-08-01 18:05:39 +00:00
9baa857f5b
Regen.
1999-08-01 08:32:48 +00:00
9657de4af2
Add an entry for the TI PCI1211 PCI-CardBus Bridge.
...
From the cardbus patches.
1999-08-01 08:32:08 +00:00
76dcbfad36
Regen.
1999-07-29 20:58:19 +00:00
8548b384f5
Add some Initio SCSI controller IDs.
1999-07-29 20:56:55 +00:00
a81c366fed
Bump MAX_START to 256, so that the ncr driver can work with more than 5
...
devices on the same bus. See PR kern/6347 for details.
1999-07-29 10:00:34 +00:00
7220690fb8
Regen.
1999-07-28 22:38:00 +00:00
4341d92cb3
Correct Acard device names.
...
Add and update a few IBM devices.
Add Toshiba and NEC devices in Portege 3K's.
1999-07-28 22:36:10 +00:00
0a1820a4e7
regen
1999-07-27 17:55:00 +00:00
424a28aa79
Add vendor ID for Geocast
1999-07-27 17:52:59 +00:00
b73b84643f
Add support for the SMC 83c175. Also, print out the chip rev when
...
we attach.
1999-07-27 00:37:34 +00:00
f48807a678
Regen.
1999-07-27 00:24:06 +00:00
b5dc3f5708
Add product ID for the SMC 83c175 Fast Ethernet chip. This is a cousin
...
of the SMC 83c170 which also supports CardBus.
1999-07-27 00:23:47 +00:00
963921febe
regen
1999-07-20 20:59:03 +00:00
62adeef8f6
add TI TVP4020 Permedia 2
1999-07-20 20:58:20 +00:00
5122ae5f44
Recognize 3c905C.
1999-07-15 18:10:29 +00:00
4dae830922
Regen.
1999-07-15 18:06:39 +00:00
4495d8362a
product 3COM 3C905CTX 0x9200
1999-07-15 18:02:08 +00:00
50eef750e4
Regen.
1999-07-15 14:53:13 +00:00
8a5bb754c7
Add Cinemaster C 3.0 DVD Decoder.
1999-07-15 14:52:48 +00:00
76b2d00f39
Regen.
1999-07-14 23:03:09 +00:00
a641b41593
Add/change a few Adaptec controller IDs.
1999-07-14 23:02:01 +00:00
cf917747a1
Add a driver for the ESS Technology Solo-1 PCI AudioDrive line of chips.
1999-07-12 15:13:30 +00:00
7d8abaa49e
Regen.
1999-07-12 15:04:41 +00:00
ecbc7c6afd
Change the ESS Solo-1 description string to match the data sheet.
1999-07-12 15:02:46 +00:00
0612a1ddef
Fix typo in a printf, from Soren S. Jorvan.
1999-07-12 13:49:38 +00:00
2422638ad5
Fix a buglet in the driver's DMA buffer list ipmlementation, causing the next-
...
in-list (wrong) descriptor structure of the buffer in question to be freed.
1999-07-10 16:46:19 +00:00
3bb408eb05
Change to approved NASA/Ames copyright. Add in Qlogic 2200 support.
1999-07-05 20:28:11 +00:00
636e8f4688
'Dolphin' -> 'Dolphin Peripherals' where appropriate
1999-07-03 05:55:23 +00:00
111e8a47c4
Add support for 36 more SIIG PCI serial/parallel cards (for a total of 37).
...
This means that all SIIG PCI serial/parallel cards (described on their
web site as "I/O boards" as of July 2, 1999) should now be supported.
1999-07-03 05:38:05 +00:00
118d2b1d4f
IPv6 kernel code, based on KAME/NetBSD 1.4, SNAP kit 19990628.
...
(Sorry for a big commit, I can't separate this into several pieces...)
Pls check sys/netinet6/TODO and sys/netinet6/IMPLEMENTATION for details.
- sys/kern: do not assume single mbuf, accept chained mbuf on passing
data from userland to kernel (or other way round).
- "midway" ATM card: ATM PVC pseudo device support, like those done in ALTQ
package (ftp://ftp.csl.sony.co.jp/pub/kjc/).
- sys/netinet/tcp*: IPv4/v6 dual stack tcp support.
- sys/netinet/{ip6,icmp6}.h, sys/net/pfkeyv2.h: IETF document assumes those
file to be there so we patch it up.
- sys/netinet: IPsec additions are here and there.
- sys/netinet6/*: most of IPv6 code sits here.
- sys/netkey: IPsec key management code
- dev/pci/pcidevs: regen
In my understanding no code here is subject to export control so it
should be safe.
1999-07-01 08:12:45 +00:00
6d864c0914
add driver for the Bit3 PCI-VME adapter, without the DMA parts for now
1999-06-30 17:45:38 +00:00
3a845702d7
A reference to http://members.hyperlink.net.au/~chart/pci.htm in comments;
...
this new effort at collecting PCI data outside the PCI SIG replaces the
one that was referenced in here before.
No regeneration required.
1999-06-30 16:52:52 +00:00
dbd86a254c
add driver for realtek 8129/8139, from freebsd, with mii stuff kicked out
1999-06-27 15:19:40 +00:00
746543928c
regen
1999-06-27 15:15:00 +00:00
120b30daf4
add some realtek 8139 clones
1999-06-27 15:13:54 +00:00
37d80b004f
Remove dead file; alphabetize
1999-06-20 18:17:22 +00:00
df81191ccd
Remove dead file
1999-06-20 18:07:18 +00:00
4a0270a264
Intel i82557 driver is now split into bus and chip bits.
1999-06-20 16:35:40 +00:00
d98b0bd725
Regen.
1999-06-19 04:51:42 +00:00
0650293580
Add Sony CXD 1947A FireWrire Controller and Neomagic 128XD.
1999-06-19 04:49:52 +00:00
12c2ab7750
Regen.
1999-06-18 04:55:27 +00:00
25b9bffe81
Add some Apple and MOT products.
1999-06-18 04:54:06 +00:00
35e149ef50
Move chip version check from advlib.c to adv_pci.c
1999-06-12 12:09:58 +00:00
efb227d3a7
fix a few KNF nits ..
1999-06-08 10:38:15 +00:00
a1259a8d1b
Regen.
1999-06-05 10:42:15 +00:00
bffc27b587
Add Matrox MGA 400, 3Dfx Banshee and Voodoo 3.
1999-06-05 10:41:37 +00:00
2b262e8565
Regen.
1999-06-05 09:44:03 +00:00
fce6975678
Add entry for Riva TNT and correct entry for Riva 128.
...
Fixes first half of PR kern/7699 by Bjoern Labitzke.
1999-06-05 09:43:21 +00:00
ee9cd19ba7
regen
1999-06-02 08:57:02 +00:00
1fabcae9bf
add SIS 6326 low-end AGP graphics
...
fix CL_PD6832 device id, PR kern/7691 from Paul Dokas
1999-06-02 08:56:03 +00:00
f687b845d0
Make sure bus mastering is enabled; some broken BIOSes don't set this
...
up properly.
1999-06-01 19:17:59 +00:00
2349cbb5b3
Glue in the SiS900 Ethernet controller driver.
1999-06-01 18:29:50 +00:00
ba43886d7e
Device driver for the Silicon Integrated Systems SiS900 10/100 Ethernet
...
chip, found on the IBM Netstation.
1999-06-01 18:19:13 +00:00
58aa48a579
regen.
1999-05-29 07:12:11 +00:00
5dfbc15479
fix error in previous.
1999-05-29 07:10:33 +00:00
3f99c8bd11
regen.
1999-05-29 07:08:52 +00:00
a250615a3b
s/bus/bridge/ for the sun pci bridges. my bad.
1999-05-29 07:07:51 +00:00
06019caad8
Recognize 900B-TPC. From Robert Elz.
1999-05-29 01:31:17 +00:00
8a6bddab08
Regen.
1999-05-29 01:29:21 +00:00
0ca37269fb
Add 3c900B-TPC product ID. From Robert Elz.
1999-05-29 01:28:52 +00:00
cc46db1ba6
For the PIIX, make sure the PIO_mode and DMA_mode get reset to the values used
...
by the controller for all drives.
1999-05-27 09:45:50 +00:00
c346b0ace0
regen.
1999-05-27 03:05:32 +00:00
8c83c41668
add the UltraSPARC IIi PCI interface
1999-05-27 02:51:19 +00:00
e21201e114
Regen.
1999-05-23 21:28:03 +00:00
a674692065
Add several entries.
1999-05-23 21:26:54 +00:00
4655ae1230
Keep track of vendor id and make sure the vendor string is NUL terminated.
1999-05-20 09:52:35 +00:00
b9f32af4e5
Regen.
1999-05-20 09:23:33 +00:00
10713ae5ad
Change vendor id 0x11c1 to Lucent since that seems to be what it is now.
...
Add a Lucent USB controller.
1999-05-20 09:23:08 +00:00
f98d358a1f
Rework layer 2 protocol input routines. Instead of calling e.g. ether_input()
...
directly, call the function pointer (*if_input)(ifp, m). The input routine
expects the packet header to be at the head of the packet, and will adjust
as necessary. Privatize the layer 2 input and output routines, allowing
*_ifattach() to set them up as appropriate.
1999-05-18 23:52:51 +00:00
d2fe8176fd
regen
1999-05-17 17:08:08 +00:00
2187089e80
add NeoMagic 256AV Video/Audio chip
1999-05-17 17:07:00 +00:00
0d0cc4aa14
Rework the way ukbd attaches itself as the console (again). We now allow
...
the code to pick the first USB keyboard instance as the console, ignoring
which USB controller it's on. Should eventually allow detaching of the
console keyboard.
From Jason Thorpe <thorpej@nas.nasa.gov>
1999-05-13 23:34:38 +00:00
2fc0e43760
just say no to __BROKEN_INDIRECT_CONFIG
1999-05-12 22:55:14 +00:00
61bf929d14
Do a fairly large internal restructuring to accomodate dual-bus host adapters
...
(e.g., the 1240). Include the new 1080/1240 NVRAM layout reading code. Some
moderately significant mailbox changes were necessary also to accomodate a
second channel.
1999-05-12 18:59:23 +00:00
83b019c919
Set the data link type to DLT_PPP_SERIAL so that tcpdump can do
...
something useful with our captured frames.
1999-05-11 02:57:58 +00:00
fbdd142801
Regen.
1999-05-07 21:20:12 +00:00
0fd4ff06c2
Added CIRRUS CL_PD6832 from "Johnny C. Lam" <lamj@stat.cmu.edu> in kern/7119.
1999-05-07 21:19:06 +00:00
4d524d7360
Regen.
1999-05-07 21:11:20 +00:00
91ddf1d6a6
Added TI PCI1251 from joda@pdc.kth.se (Johan Danielsson) in kern/6873.
1999-05-07 21:09:31 +00:00
1669ea470b
regen
1999-05-07 15:40:57 +00:00
1ce7678fb8
add another AGP graphics chip and a PCI-VME interface
1999-05-07 15:38:40 +00:00
307a48b721
Regen
1999-05-07 00:57:46 +00:00
e735c2bf67
Add TI LYNX FireWire Controller (as used in the Apple B&W G3)
1999-05-07 00:56:46 +00:00
375d7c32f2
Add a way for machine-dependent code to tell a USB controller that it
...
has the console input device. The USB keyboard driver uses this to
attach the first USB keyboard instance as the console keyboard.
Unfortunately, this must still be deferred to autoconfiguration time,
but there's not much we can do about that right now.
1999-05-06 19:12:22 +00:00
8c630939a3
regen
1999-05-06 14:29:21 +00:00
10c5298d7e
add pci devices found in U5's:
...
- ati weird mach64
- ebus bus
- `network' hme compatible ethernet
- `simba' PCI bus
1999-05-06 06:17:39 +00:00
964b69ec84
Back out previous. Thanks to cgd for pointing out another way to do this.
1999-05-06 01:10:28 +00:00
2a4490daa5
Add a `bus' member to the pci_attach_args. This is not normally used,
...
but some child drivers might need to know this information.
1999-05-06 01:01:19 +00:00
9893727873
Fix the way we compute the mode to use: for multiword DMA, the used mode was
...
2 less than the one we could really use, so for multiword DMA mode 0 or 1,
the driver tried to use DMA mode 255 or 254 (0 - 2 with a u_int8_t).
1999-05-05 15:24:59 +00:00
7bffc1e720
Protect WDCDEBUG from multiple definitions.
1999-05-03 07:44:47 +00:00
4f8cf68674
Rototillage; make this actually useful. To wit:
...
- Initialize more of the Bt463's registers, instead of leaving them
in undefined states. Notably, the window type table is set up
with 8-plane pseudocolor and 24-plane truecolor modes.
- Bus-space-ify, mostly. Could use some more cleanup, but not until
the rest of the tga stuff is converted, too.
- Do the TGA/RAMDAC communication dance more carefully.
- Explain a lot more of what's going on in comments.
1999-04-30 02:47:42 +00:00
770b67425d
Accelerate scrolling. Originally by Roland Dowdeswell, revised by
...
{drocher,ross}@netbsd.org.
1999-04-28 23:24:33 +00:00
55fd59f1e0
Make PCI IDE DMA work on big-endian systems.
1999-04-28 00:18:12 +00:00
1eb689a712
Make the VIA Rhine driver work on big-endian systems. From Izumi Tsutsui,
...
PR #7305 .
1999-04-26 23:19:10 +00:00
4c7a2ee3b0
Fix a couple of problems in the PCscsi-PCI driver:
...
* resid in pcscp_dma_intr() should also be set in the data out phase.
* Don't set up DMA in the transfer pad operations.
* Change URL of the PDF technical manual to the index page.
* include <machine/bswap.h> on big endian machines.
Fixes timeouts writing large blocks to tapes. From Izumi Tsutsui,
PR 7252.
1999-04-25 01:20:02 +00:00
207f873ac2
Fix an mbuf leak in the strict alignment case of packet reception.
1999-04-24 22:09:56 +00:00
af729a150c
initialize 'p' for lame gcc-2.7.2.2 flow analysis.
1999-04-14 03:26:34 +00:00
9e87738e9d
Add entries for TI, Ricoh, Toshiba PCI-to-cardbus bridge chips, so
...
we can identify them as cardbus chips supported by the cardbus patches.
Add entry for OPTI chipsets whose interrupts arent properly set up by
some BIOSes.
From cardbus patches<ftp://nandra.iri.co.jp/pub/NetBSD/CardBus by
HAYAKAWA Koichi <haya@tcad.ulsi.sony.co.jp>.
1999-04-12 23:18:16 +00:00
ecab881e98
PR 6852 from Chris Jones <cjones@hideo.nervana.montana.edu>.
...
This handles the interrupt structure of Compex boards.
1999-04-12 04:31:55 +00:00
2198b984e8
Kill an extra 'pciide0: ' in a printf
1999-04-06 17:49:14 +00:00
eebeea5b23
Read the board revision and trim cache line size back from 16 to 1
...
for early revision 2100 boards. Make sure to turn ROM off for these
boards.
1999-04-04 01:14:58 +00:00
500edb5379
Fix typo. (From PR 7027)
1999-04-01 14:55:25 +00:00
4384fd5134
Fix big-endian support.
...
TULIP_BUSMODE_BIGENDIAN does bswap packet buffers also, so we should use
TULIP_BUSMODE_DESC_BIGENDIAN on big-endian machines. (PR 7027)
XXX 21040 doesn't have this bit, but supporting only 21041+ is better than
nothing.
1999-04-01 11:02:20 +00:00
e50460f5fa
Oops- if you enable 1080 support, remember to load the f/w
1999-03-27 01:08:59 +00:00
99d46bf762
add isp1080 support and some basic PDB change stuff
1999-03-26 22:39:44 +00:00
d907e1f61e
First pass at support of Compaq NetFlex 3/P PCI: this one has
...
IO and Mem base address register inverted.
Still need some MII hack to get it fully fonctionnal.
1999-03-25 16:15:00 +00:00
6b9af88b99
wrap kernel bits in shared kernel/userland files
1999-03-25 04:09:33 +00:00
7bfd643eab
install if_lmc*.h
1999-03-25 03:54:43 +00:00
0c2f5ada28
Commit files for the LAN Media Corporation high speed serial/HSSI/DS3 driver
1999-03-25 03:32:43 +00:00
960c283a65
Add LAN Media Corporation info
1999-03-25 03:28:17 +00:00
77597ecd3e
Start commit of Lan Media Corp T1/HSSI/DS3 driver
1999-03-25 00:51:53 +00:00
fe0bb65b38
in general, it's a good idea to make sure you at least have all of the
...
variables you reference, before you commit something...
1999-03-24 18:47:51 +00:00
d2397ac5f7
completely remove Mach VM support. all that is left is the all the
...
header files as UVM still uses (most of) these.
1999-03-24 05:50:49 +00:00
3993ee01e4
Don't enable I/O or memory access here! These bits in the PCI CSR are
...
set up by the firmware, and indicate which mapping types the system
supports.
1999-03-24 01:07:59 +00:00
ac0f626cca
Make sure bus mastering is enabled.
1999-03-24 01:05:15 +00:00
9f85a4a798
Make sure bus mastering is enabled.
1999-03-23 23:18:50 +00:00
cfe7413adb
Make 48KHz output work.
1999-03-22 07:58:55 +00:00
f60907c286
Regen.
1999-03-19 06:40:11 +00:00
4e92fb2fd1
Add AudioPCI 97 (a.k.a. Creative Ensoniq AudioPCI).
1999-03-19 06:39:32 +00:00
ff42ff62e8
pull pci_machdep.h in from machine/
1999-03-19 03:37:52 +00:00
1954300d6c
Regen.
1999-03-17 19:21:49 +00:00
0d433f490b
Add Silicon Integrated Systems SiS900 10/100 Ethernet.
1999-03-17 19:20:51 +00:00
d596b20f1e
prototype 1080/1240 support
1999-03-17 06:16:42 +00:00
e380eb62d5
Tron whacked my you-know-what because I didn't follow procedure.
...
So I insered his description of the 'procedure' in the most likely
place a developer will find it.
1999-03-16 22:41:56 +00:00
ddbc34d638
Regen from "pcidevs".
1999-03-16 22:32:58 +00:00
f50c9fa8ea
add Qlogic 1080 && 1240 product IDs
1999-03-16 21:24:46 +00:00
23903bfc0e
Regen.
1999-03-11 05:17:54 +00:00
272f5b609d
Add several VIA Technologies chipsets.
1999-03-11 05:17:24 +00:00
5704ad4969
regen
1999-03-09 11:48:59 +00:00
2987883f07
add 2 ISDN cards, from Martin Husemann per PR kern/7110
1999-03-09 11:48:03 +00:00
3ebb419571
Update to slightly altered rnd_attach_source() api
1999-02-28 17:08:05 +00:00
ceef7fa3d7
Fix AdvanSys Narrow driver to work on Alpha
1999-02-25 20:20:30 +00:00
71036465a5
In cy693_setup_channel(), setup timings for IOR too (they were left to 0,
...
which is a way too higth timing for some devices). Thanks to Ken Wellsch
for trying the multiple debug kernels until the problem was located.
1999-02-22 10:12:00 +00:00
ea05c3b739
Fix typo.
1999-02-20 07:07:07 +00:00
598b05da47
Regen.
1999-02-19 19:12:09 +00:00
d9c29083d4
Improve descriptions for DEC Ethernet chips.
1999-02-19 19:11:33 +00:00
3f8a09bba4
Improve product descriptions, and add 3c905-FX and 3c980 Server Adapter
...
products.
1999-02-19 06:58:42 +00:00
7248c3be19
Improve card descriptions.
1999-02-19 06:57:56 +00:00
02df2bd5a5
Regen.
1999-02-19 06:56:53 +00:00
1128dd593e
Improve the descriptions of 3Com Ethernet cards, and add the 3c905B-FX
...
and 3c980 Server Adapter products.
1999-02-19 06:55:15 +00:00
3a63b5db2a
Regen.
1999-02-19 05:53:36 +00:00
f43c45889a
Add several Tulip clone chips.
1999-02-19 05:53:00 +00:00
bd4cd051b9
This is an utterly revolting hack to work around the previously mentioned
...
lossage. On the Alpha, we force the buffers to be allocated through the SGMAP
so that the PCI bus addresses are low enough.
At least it's only one line of code...
1999-02-19 02:27:59 +00:00
a473ed5477
Fix omission in previous.
1999-02-18 19:24:39 +00:00
699a815751
Pass the correct address (PCI bus address, not PA) to the card.
...
Also fix some typos and add more debugging printf()s.
This would work on the Alpha, but the card I have appears to have the upper
address bits chopped off, and the ring buffer gets mapped using the DGMAP,
which uses the upper bits. Boom.
1999-02-18 09:22:17 +00:00
thorpej