559f1ca662
re-generating isapnpdevs.c isapnpdevs.h
1999-11-17 02:03:10 +00:00
e589155692
Remove some minor stuff that wasn't right, and wasn't even really used.
1999-11-17 01:16:37 +00:00
ef8e85f177
Regen.
1999-11-17 00:09:48 +00:00
62058f9f6b
Add the SBLive! joystick device.
1999-11-17 00:09:17 +00:00
ffb29861c2
Add a few more diagnostics.
1999-11-16 22:19:03 +00:00
70ad5362d4
Fix a pointer test that I got wrong in the big code cleanup.
1999-11-16 22:15:50 +00:00
a7c74fb98f
Re-add stub Qlogic F/W files so that life is easier when/if the new
...
Qlogic F/W copyright is approved.
1999-11-16 18:48:40 +00:00
c5019ec09a
Add a quirk for a buggy Qtronix keyboard.
1999-11-16 12:08:38 +00:00
b019d68caa
Some minor changes from OpenBSD.
1999-11-16 12:04:28 +00:00
1d1d6b868d
Mark an early Altec Lansing speaker as broken.
1999-11-16 11:39:48 +00:00
982eb1b4e6
Preallocate DMA buffers. Fixes problem reported by Hubert Feyrer.
1999-11-16 10:21:11 +00:00
1e396f9b0b
Support for Adaptec AVA-1502P
...
kern/8804 patch by NAKAGAWA, Yoshihisa
1999-11-16 05:10:54 +00:00
a525b9a12a
Commit patch kern/8778
...
Subject: NEC PCI modem support
1999-11-16 03:15:17 +00:00
7463c844a0
Make this file compile again; terminate the continuation line with backslash.
1999-11-16 02:13:02 +00:00
a49d3ecb33
Add a macro to generate a class code given class, subclass, and interface.
...
From UCHIYAMA Yasushi's PCI BIOS patches.
1999-11-15 23:41:10 +00:00
aef39844d9
Add quirk for speakers that pretend to support the audio class, but don't.
...
Add quirk for mice that geberate spurious button up events (XXX fix not fully
implemented).
1999-11-15 22:04:14 +00:00
4429aebc03
added support for BOCA 6port ISA adapter. 3x16552 with an
...
interrupt status register at yet-another-address.
ioat0 at isa? port 0x220 irq 5 flags 1# BOCA 'ioat66' 6-port cards
com* at ioat? slave ?
1999-11-15 21:13:38 +00:00
70bd4a7d53
Let user enable/disable WDTR, SDTR and Tag Queuing from kernel config file
1999-11-15 19:55:53 +00:00
0b1963121a
Add Kirk McKusick's soft updates code to the trunk. Not enabled by
...
default, as the copyright on the main file (ffs_softdep.c) is such
that is has been put into gnusrc. options SOFTDEP will pull this
in. This code also contains the trickle syncer.
Bump version number to 1.4O
1999-11-15 18:49:07 +00:00
5527afff97
(pccbb_pci_callback): no point in reading the bus number register
...
twice
1999-11-15 16:19:03 +00:00
cc2e1c302a
- Reflect changes in ibus_intr_establish() definition.
...
- More concise way to initialize TC framebuffer device for console.
1999-11-15 09:54:41 +00:00
3be097c31d
Handle insertion and removal events more strictly.
1999-11-15 06:08:02 +00:00
89d0a53e2c
Fill 0 into CardBus base address registers before a card is
...
configured.
1999-11-15 06:01:11 +00:00
b06e451c53
- No need to include '<machine/autoconf.h>'.
...
- Nuke tc_badaddr() check from asc_tc because the existency check is already
done for real TC devices.
- Nuke tc_badaddr() check from asc_ioasic because it is a builtin device
found in all of IOASIC DECstations.
1999-11-15 05:25:57 +00:00
8e061f4876
Make sure TC_IPL_xxx synonymous with IPL_xxx.
1999-11-15 03:45:50 +00:00
9c3842f41b
Relocate 'struct tc_softc' and several function declarations useful
...
to outsides of 'tc.c' into 'tcvar.h'.
1999-11-15 03:41:49 +00:00
b202ac1466
Allow SCSI_DELAY to be shorter than 2 seconds.
1999-11-14 18:06:09 +00:00
5f8274b5a6
Get transfer status right on short transfers. From FreeBSD, Nick Hibma.
1999-11-13 23:58:01 +00:00
b45486b2a2
Make this work again by adding XS_CTL_ASYNC to the SCSI requests in
...
se_ifstart and se_recv.
1999-11-13 18:03:34 +00:00
748b241afb
Export softc.
1999-11-13 13:40:28 +00:00
5f4088eb26
Hide function definition within ifdef's is becomes active in.
1999-11-12 19:11:25 +00:00
f9bf746086
(cardbus_attach_card): don't free cc
1999-11-12 18:18:38 +00:00
4278cf451e
if the image size is zero, assume it really means one block
1999-11-12 18:17:36 +00:00
4bdf6bd731
Call mii_down() as appropriate.
1999-11-12 18:14:17 +00:00
bca88a28c8
Add mii_down(), which is used by MAC drivers to inform PHYs that the
...
interface is now down. PHYs use this to cancel pending asynchronous
operations.
1999-11-12 18:12:59 +00:00
1c37111492
Identification of DOMEX PCI-SCSI board, by Thilo Manske, PR 8772.
1999-11-12 12:03:32 +00:00
0d2fabdf26
A number of stylistic changes to increase readability (many suggested
...
by Nick Hibma):
use NULL not 0
declare all local definitions static
rename s/usbd_request/usbd_xfer/ s/reqh/xfer/
rename s/r/err/
use implicit test for no err
KNF
1999-11-12 00:34:57 +00:00
c8ad47986a
Regen.
1999-11-12 00:26:39 +00:00
505ab77387
Add a modem from ELSA.
1999-11-12 00:26:13 +00:00
3981e235b7
Zero is a valid value for ch_tcor and ch_rcor, so be a bit more conservative
...
when deciding if the baud-rate should be changed. (Spotted by Bruce Martin)
Also fix the mask used when setting the Rx FIFO threshold to zero. I don't
yet understand how the Rx side worked with the code as it was. ;-}
1999-11-11 09:38:43 +00:00
445d6f8e64
Regen.
1999-11-10 19:47:39 +00:00
f2725f06b8
Add another Quickcam.
1999-11-10 19:46:40 +00:00
3bc4cec200
allow to set multiple keyboard "variants" simultanously.
...
Follows PR kern/8456 by Michael Eriksson <eramore@era-t.ericsson.se>,
implemented diffently.
1999-11-10 16:49:38 +00:00
391c8e434d
regen
1999-11-10 15:56:39 +00:00
805b56adb4
Add Entrega USB Serial->DB9 widget
1999-11-10 15:55:51 +00:00
0c76b12125
Give lp->d_type a value other than 'unknown'. When the model is "ST506",
...
the d_type field becomes DTYPE_ST506, otherwise it will be set to DTYPE_ESDI.
1999-11-10 14:11:34 +00:00
8276207b08
Regen.
1999-11-10 12:31:31 +00:00
8436192416
Add two more devices.
1999-11-10 12:31:01 +00:00
f8934aa2f6
Modification to the previous:
...
We still have to preload the command, when selecting without ATN. (We could
probably avoid this by being more careful in the interrupt handler...)
1999-11-10 05:02:53 +00:00
58fec0d55a
When sending a REQUEST SENSE, do *not* attempt to create an I_T_L nexus. This
...
is technically wrong, and some targets (like my 4x NEC CD-ROM drive) misbehave
when we do.
1999-11-10 04:21:30 +00:00
105a2438f9
Fix an obvious bug is some diagnostic code; we must lower our spl again...
1999-11-10 04:19:59 +00:00
5b75863870
A residual after select with DMA step 2 is legitimate (in fact, *not* having a
...
residual would probably be cause for concern), so don't spew about it.
1999-11-10 00:42:37 +00:00
e9fc8103ca
Make detach wait for interrupts to finish.
...
Bail out in interrupt routine when device is dying.
1999-11-09 16:52:14 +00:00
3ea93b7669
Make sure to call vdevgone() on all devices when deteching.
1999-11-09 16:50:47 +00:00
c7cca9cd39
make this compile with CARDBUS_DEBUG
1999-11-09 15:03:59 +00:00
dea88f1c20
Completely rewrite receive processing to avoid sleep-deprivation-induced
...
brain damage and infinite loops, and lousy RTTs
Also, flush tx queues when reassociating with AP and when taking the
interface down.
1999-11-09 14:58:07 +00:00
e54d837b8b
Maintenance CardBus/PCI extension ROM mapping routine.
...
1. Make Extension ROM not to be mapped on I/O space.
2. Do not check the bus-space indicator in ROM register.
1999-11-09 09:20:30 +00:00
2924b6835a
Fix errors in sfb_copycols() of the forward (left-to-right) case.
1999-11-09 08:25:31 +00:00
3949e74f78
If we have a choice: do not trust the parity disk for read
...
balancing in a RAID 1 set if we know that the parity might not
be up-to-date. Thanks to Thor for bringing this to my attention.
1999-11-09 03:07:20 +00:00
1b686307cb
correct number of BAR:s in cardbus_cis_info
1999-11-08 20:21:24 +00:00
fe2d79ec9a
Let decode_tuples take function to call for each tuple, and use this
...
to get some vital information from the CIS (some network cards need
this to get the mac-address). This should be merged with the related
code for PCMCIA cards, but that requires more thought.
1999-11-08 20:19:10 +00:00
dbb2685da6
add some bare-bones CIS information to the attach_args struct
1999-11-08 19:59:08 +00:00
f6be3b394d
regen
1999-11-08 19:57:32 +00:00
19ff47781e
copy xircom entries from pcidevs
1999-11-08 19:57:13 +00:00
1cfdb728d0
avoid touching freed mbuf after allocation failure.
1999-11-08 15:56:16 +00:00
66ab262b1c
add a bunch of debug printfs under IFF_DEBUG and IFF_LINK2;
...
turn on IFF_DEBUG to trace the management protocol goo.
turn on IFF_LINK2 as well to see beacons.
1999-11-08 15:45:00 +00:00
94bb856781
misc cleanups; seems to work a little better in a dense-AP environment now.
...
1) ignore probe requests rather than printing "unknown mgmt subtype"
(cosmetic)
2) don't panic if mget of the 2nd mbuf in a chain fails (patch from MCR)
(though that whole function badly needs to be rewritten)
3) be a little more tenacious about hanging on to an access point.
1999-11-08 13:24:00 +00:00
9cec807b1c
Return -1 from wsmux_displayioctl() if no muxes components like the ioctl().
1999-11-08 10:10:25 +00:00
0c1542d9a4
Apply wrstuden's stopgap change to make alpha/macppc X work without wsmux.
1999-11-08 04:48:18 +00:00
8567277ae0
Print range of all iospaces or all memspaces if their length aren't zero.
1999-11-07 07:44:21 +00:00
b4560adaf2
regen
1999-11-07 07:03:08 +00:00
7867af6cfb
back out rev 1.166:
...
(1) the list added isnt' complete and i'd call it incorrect. (There are
other devices with these names, where were omitted. I've never seen
the devices with these IDs, I _have_ seen the other devices that go
by these names.)
(2) the PR (8754) had not been updated to note that the problem was
fixed, and i'd preiously asked the submitter for more information and/or
a corrected list.
1999-11-07 06:59:46 +00:00
8be740541b
Extract MAC address from CIS data in pcmcia front end.
...
Fix multicast address manipulation.
ipv6 now works through this driver.
1999-11-06 16:43:53 +00:00
b2a56ee1b9
regen.
1999-11-06 13:50:02 +00:00
080ff79d14
Add vendor/product entry for Auravision VxP524 PCI Video Processor.
1999-11-06 13:48:29 +00:00
34e97b4c65
Regen.
1999-11-06 11:18:00 +00:00
3514a2e115
Add SIIG devices. Closes PR kern/8754 from Andreas Wrede <andreas@planix.com>
1999-11-06 11:17:30 +00:00
6f961bbe31
It's okay for a memory region to be larger than it's alignment.
1999-11-06 06:20:53 +00:00
6b2ae05f21
Possible typo.
1999-11-06 01:01:20 +00:00
9be459a1fb
Regen.
1999-11-06 00:59:56 +00:00
9c7bc44f91
Support an earlier version of IO-DATA PCLA/T.
1999-11-06 00:58:32 +00:00
23c39b410d
Fix some diagnostic output with a patch from Jonathan O'Brien.
1999-11-05 19:00:44 +00:00
341c38ac01
In rasops_do_cursor(), don't pull the mask from ri_devcmap[], just use ~0.
...
Needed to make cursor DTRT on NetBSD/hpcmips - from takemura.
1999-11-05 10:16:11 +00:00
73bf131124
Add rcsid's
1999-11-05 05:13:36 +00:00
392a4acdd7
- Remove temporary hack to recognize PMAGD since SFB+ rendering function
...
is found not fully upward compatible to its predecessor. sfbp.c is now
under development.
- Reduce copycols() malfunction, but has still lot of troubles.
1999-11-05 03:28:40 +00:00
fb8b192c0a
Pass xfer->c_bcount instead of sc_xfer->datalen to the device, so that
...
it gets the rigth len for a request sense (from OpenBSD).
1999-11-04 21:16:53 +00:00
0ad32f07d2
Revert this part of rev 1.59:
...
- Be more conservative when resetting the interface after a transmit error.
It caused the interface to totally wedge on the (somewhat common) transmit
FIFO underrun condition.
1999-11-04 20:27:11 +00:00
4a09180976
Don't pass rd/mult capability though a PCI-PCI bridge. The bridge would
...
have to break it up into mutliple rd/line's anyhow, so why bother letting
the device issue it in the first place.
1999-11-04 19:04:04 +00:00
110ac27449
Make sure devices are told they can use rd/line, rd/mult, and wr/inval.
1999-11-04 19:03:00 +00:00
d9bc6e4f98
Conditionalize so this builds on 1.4.x..
1999-11-04 18:43:42 +00:00
12b00b0444
Allow this to build on 1.4.x, too
1999-11-04 18:41:14 +00:00
fd0062aeab
Attempt to be smart about whether to use I/O space or memory space to
...
access the card's shared memory: if we can't allocate the 32k we need,
fall back and just use I/O space access.
1999-11-04 17:48:13 +00:00
2ee5984fa6
Driver front-end for BayStack 650 PCMCIA 802.11 card.
...
Committed using the driver.
1999-11-04 17:12:43 +00:00
58e709f695
Minimally functional driver for the am79c930 802.11 controller chip).
...
Working well enough to support dhcp; i'm doing this commit using the
interface.
Supports FH only. Does not yet do ad-hoc mode; works in
infrastructure mode. Not yet tested in environments with multiple
access points.
1999-11-04 17:10:53 +00:00
c0b20561f7
regen
1999-11-04 16:18:41 +00:00
9df6f09e30
Add Aureal AU8820
1999-11-04 16:02:20 +00:00
fb580e3f6e
Regen.
1999-11-04 10:34:40 +00:00
1289659618
Add SBLive!
1999-11-04 10:34:03 +00:00
c8532c3ebe
regen
1999-11-04 09:39:17 +00:00
dbfcb792e1
add Xircom X3201-3 Fast Ethernet Controller
1999-11-04 09:38:38 +00:00
0588cdfc88
Update user-level PPS-API to match -05 draft.
...
Change PPS_<xxx> ioctls to PPS_IOC_<xxx>.
1999-11-04 05:33:58 +00:00
bd0928e723
find "SUNW,hme" as well as "hme". this matches the onboard
...
ultra2 hme. haven't actually tested this beyond it probing
because my scsibus is hanging. anyway, it reports:
hme0 at sbus0 slot 14 offset 0x8c00000 vector 21 ipl 6: address 08:00:20:8f:7f:8f
1999-11-04 05:31:38 +00:00
97bbad1f0b
Do rd/line and rd/mult on the MX98725 and LC82C115, too.
1999-11-04 01:27:32 +00:00
e3f20e8ff1
Use Memory Read Line and Memory Read Multiple on the 21140, 21140A,
...
21142, and 21143, if the PCI bus says its okay.
1999-11-04 01:20:55 +00:00
a4e1bde0b3
Print out if the read {line,multiple} and write/invalidate commands are
...
okay to use.
1999-11-04 01:03:34 +00:00
ca9b9a3b2e
Adapt to mii_phy_probe() change.
1999-11-04 00:24:00 +00:00
bedeeb9896
Allow mii_phy_probe() to be called multiple times, and allow the caller
...
to specify either the PHY number or the PHY `offset' (1st, 2nd, 3rd, etc.)
to configure.
1999-11-04 00:22:07 +00:00
3750d3f592
Update for ifmedia changes.
1999-11-03 23:07:10 +00:00
1e460723a5
Don't flag an error when doing ioctl() on a mux without any
...
multiplexees. Should fix PR 8723.
1999-11-03 22:48:38 +00:00
bc82bff1dc
Don't add any loopback versions of media, for now.
1999-11-03 22:32:45 +00:00
8fc600c3b1
Clean up the code that adds media a little, and make media selection
...
table-driven in preparation for some other changes to be made.
1999-11-03 22:30:32 +00:00
e017601bd3
More or less completely rewrite the way DECchip media is handled, and
...
add support for the DECchip 21142/21143 SIA/SYM media. Make the Macronix
98713 behave like a 21140A, and the 98713A and later behave like a 21143.
Nuke all of the Macronix-specific Nway code, as it will be identical to
the 21143 Nway code once it is written.
1999-11-03 22:25:08 +00:00
eb16cd3aa7
Define DECchip 21142/21143 register bits, and since the Macronix chips
...
are nearly perfect 21143 clones, delete a bunch of redundant info in that
section of the file.
1999-11-03 22:22:49 +00:00
94b8f863fa
Don't use structs for BI space definitions, use offsets.
1999-11-03 21:57:40 +00:00
31ba134e32
use __vax__ and __i386__ instead of vax and i386
1999-11-03 20:50:17 +00:00
f13d3f5b3b
from jason:
...
avoid biodone()ing the original buf twice when a component buf
gets an error. fixes PR 8704.
1999-11-03 16:04:03 +00:00
d2b362b685
Only update the cursor state if it's enabled.
1999-11-03 15:55:27 +00:00
4f1f2c6398
Fix silly error that caused the secondary channel to be ignored if the primary
...
channel was disabled.
1999-11-03 14:54:07 +00:00
3b576cc6b2
Update.
1999-11-03 12:11:26 +00:00
3fc5780b19
Allow irq 15 since some clones use it.
1999-11-02 23:35:02 +00:00
361b083d4c
Shorten some delay()s. From WITEK Wnuk <witek@atari.org>
1999-11-02 17:48:01 +00:00
35483ee3bf
Set mixer controls after a reset.
1999-11-02 17:05:05 +00:00
b952f8727b
Print a little more information when attaching.
1999-11-02 16:54:27 +00:00
b536890c88
Add a mixer control for the Master Volume Mute knob.
1999-11-02 12:11:42 +00:00
72a864f78c
Add the midibus attribute to the fms driver.
1999-11-02 11:58:06 +00:00
8f94bda30c
Add new font sets - VT220 8x8 and 8x10.
...
I brought them from arch/i386/isa/pcvt/Util/fonts.
You can specify FONT_VT220L8x8 or FONT_VT220L8x10 in a configuration file.
1999-11-02 10:25:22 +00:00
bc18b45323
Clean up attachment printing a bit.
1999-11-02 05:41:27 +00:00
09c41837ce
Fix crash when both 1370 and 1371/1373 devices are configured.
...
Update documentation links.
XXX The initial volume of the 1371 mixers is set to 255. Should be ~200.
1999-11-02 05:40:59 +00:00
c8852145bc
Get fms MPU and OPL module inclusion right.
1999-11-02 00:29:20 +00:00
3c40153ea9
Fold some long lines and make it compile with the new auconv functions.
1999-11-01 23:26:58 +00:00
7c8206c662
Add a missing file for the fms driver.
1999-11-01 21:54:12 +00:00
8cd393778b
Regen.
1999-11-01 20:43:51 +00:00
684aa0605c
Add FM801 audio device driver. From Witold J. Wnuk ww181302@zodiac.mimuw.edu.pl
...
Closes PR kern/8729.
1999-11-01 20:43:12 +00:00
860ebb7a92
Make little endian and big endian version of all functions
...
that deal with 16 bit samples. Let the drivers decide which ones
to use.
1999-11-01 18:12:19 +00:00
fb4a4525a8
Be cautious about the blocksize returned by the hardware driver to
...
avoid division by 0.
1999-11-01 18:06:36 +00:00
88f1d44cc2
Change the interface of cardbus_function_enable() and
...
cardbus_function_disable().
1999-11-01 09:59:23 +00:00
8553661a5e
Maintainance the name of Ricoh PCI-CardBus bridges.
1999-11-01 08:58:45 +00:00
d094848950
uncomment fxp_cardbus
1999-10-31 15:14:17 +00:00
b0e5ebfddc
commit a more working version if this driver; so far only tested on an
...
Intel `PRO/100 LAN+Modem56 CardBus II'
1999-10-31 15:12:39 +00:00
8efdaab402
Fix the size of start_sector, end_sector and end_sector_l0. (I'm just going to
...
assume the Linux people will also fix this, since I reported it to them.)
1999-10-31 14:03:16 +00:00
6346873ea6
Use the right attribute for attaching USB controllers.
...
From MAEKAWA Masahide <bishop@rr.iij4u.or.jp>
1999-10-30 17:03:30 +00:00
98b5a519ce
In sddump(), check sd->sc_dev.dv_flags once sd has been initialised.
...
Patch supplied by tsutsui@ceres.dti.ne.jp in kern/8708.
1999-10-30 16:35:12 +00:00
db05febdfa
Add enable/disable support and EEPROM size selection, prerequisites
...
for getting the cardbus fxp attachment to work.
Tested on the built-in 82559 in a VAIO Z505S.
From Johan Danielsson / PR8631; changed slightly to KNF.
1999-10-30 16:07:58 +00:00
3d0e8ae9dd
Make this file compile again by using the same names as in pcidevs.
1999-10-30 16:02:28 +00:00
a498fbea5f
Add midibus attribute for eap.
1999-10-30 14:11:16 +00:00
b9451ead47
remmove unncecessary empty line.
1999-10-30 12:07:08 +00:00
fc21ddd943
Call epstop at the beginning of epinit, especially to make sure that
...
ep_tick is untimeouted before new one is scheduled. This makes 3C574-TX
works at least in 10Mb/s mode.
1999-10-30 01:35:47 +00:00
3f199cc5e4
Add and delete a reference to an adapter at aicattach(), to make sure
...
that the adapter is disabled even if it wasn't enabled/disabled during
configuring its children. This fixes the bug that if an aic pcmcia card
is inserted in a slot during boot, further attaching of any card on the
slot fails once the card is removed.
1999-10-30 00:58:32 +00:00
613db45d20
Add MIDI support.
...
Closes PR 8578.
1999-10-29 23:03:18 +00:00
b2db663942
fix entry for lemac on isa. add entry for wavelan on isa
1999-10-29 21:38:04 +00:00
5fcccf1e9c
Add a placeholder for the ISA WaveLAN card
1999-10-29 21:35:43 +00:00
471ab17680
Regen.
1999-10-29 21:31:30 +00:00
c707186f57
Add AHA-1480 (adaptec cardbus scsi)
1999-10-29 21:30:19 +00:00
12c16f443f
DEC specifies that dealing with CSR0 in the interrupt routine must be
...
done in a special order. Do that here also, but for now inside #ifdef vax
because of the (possible) impact on other arch's.
Now vaxen without IOMMU can use the MI LANCE driver.
1999-10-29 19:50:07 +00:00
e45ef6abcd
Emulate the Linux DVD_* ioctls(2). This gets us 90% of the way to running the
...
LiViD DVD player. (See forthcoming mail to current-users.)
XXX NOTE: We should do something to probe capabilities, rather than allowing
these ioctls on any device.
1999-10-29 15:02:56 +00:00
ee08428d1c
handle multi function cards
1999-10-29 12:02:13 +00:00
1ea6cd1de0
add cardbus_exrom.c to cardbus device
1999-10-29 11:31:40 +00:00
54fed4c419
add support for reading memory mapped CIS via BAR or EXROM register
1999-10-29 11:30:27 +00:00
65c3b4c4c7
Maintainance the name of Ricoh PCI-CardBus bridges.
1999-10-29 07:57:38 +00:00
47fc621312
Remove unnecessary check in cardbusmatch.
1999-10-29 07:29:08 +00:00
dd9c83a378
Change cardbus messages when cardbus does not configured.
1999-10-29 07:27:43 +00:00
9d820e6fab
Add some 21142/21143 goo.
1999-10-28 23:32:37 +00:00
8ff7881953
add macro to get ROM image number, given a CIS pointer
1999-10-28 22:29:04 +00:00
12d5a03a7f
code to read PCI expansion ROM
1999-10-28 22:27:00 +00:00
77ee68352f
regenerate
1999-10-28 20:00:29 +00:00
2acce3142f
Add BayStack 650 802.11 FH card
1999-10-28 19:59:31 +00:00
652701006d
Fix suspend/resume-related problems observed on fxp0 on Sony Z505S:
...
Symptoms: system would crash with "data modified on free list" pool
panic from the mbuf cluster pool shortly after a resume. The cluster
in question contained a valid 82557 receive descriptor and an IP
packet. Happened sporadically in normal use. Easiest way for me to
reproduce it was to run tcpdump and a flood ping and do a
suspend/resume cycle or two.
Changes:
- in interrupt handler, if the interface isn't in IFF_RUNNING state,
just ack interrupts and return; don't try to receive packets, queue
new descriptors, etc., etc.,
- add power control hook to take interface down on suspend,
and restart it (if it was up) on resume.
- tweaks to fxp_stop and fxp_shutdown to avoid recursive panics due
to the (now fixed) bug.
1999-10-28 19:21:51 +00:00
7c3f92fd69
Remove f/w from tree. The licences are not acceptable to TNF.
1999-10-28 16:13:43 +00:00
44c603dd7b
Remove reference to loadable f/w.
1999-10-28 16:11:19 +00:00
38cae5303b
Remove htopci(). bus_space_write_4() takes care of necessary endian conversions.
1999-10-28 13:49:19 +00:00
9388a61d05
Add a few more tests for safety.
1999-10-28 12:08:38 +00:00
061402cc4a
add
...
SOCKET LOW POWER ETHERNET Compact Flash Card.
1999-10-28 09:21:46 +00:00
0f51f21761
add entry Corega PCC-TX PCMCIA card.
1999-10-28 08:12:14 +00:00
357dc256c9
Make sure read() and write() fails on the control pipe.
1999-10-28 07:28:51 +00:00
a6e07f236b
Sorry backout Patch about COREGA FAST_ETHER_PCC_TX.
1999-10-28 07:21:28 +00:00
e33e7aa647
Regen.
1999-10-28 06:41:40 +00:00
786bc11173
Another device...
1999-10-28 06:41:13 +00:00
312acdff00
add Corega PCC-TX PCMCIA Card (not CardBus but 100Base-TX) Entry.
1999-10-28 06:38:51 +00:00
7227a97ad0
I was misinformed. I cannot get away from specifying tags for FC. Some devices
...
are happy w/o them- some are unhappy (IBM drives).
1999-10-28 02:50:34 +00:00
5ef42fc055
Regenerate.
1999-10-27 19:10:58 +00:00
5a76bfb229
Yet another Fujitsu Ethernet card.
...
Contributed by HEO SeonMeyong in PR 8658.
1999-10-27 19:10:02 +00:00
00ba1a42eb
Fix a braino in some currently-disabled code.
1999-10-27 19:05:44 +00:00
040891d3e1
regen
1999-10-27 15:12:28 +00:00
c48725b28e
PR/8692: maximum entropy: Recognize Creative SB Awe 64 joystick.
1999-10-27 15:11:56 +00:00
4d92da53d4
allow mapping of the expansion rom
1999-10-27 14:14:18 +00:00
132b3f5e57
add Expasion ROM register (0x30);
...
fix typo in Cardbus_conf_write
1999-10-27 14:09:52 +00:00
d9c500abb3
(cardbus_attach_card): don't mask everything *but* the latency timer
1999-10-27 14:01:04 +00:00
8ecf3c7c3e
Add support for ES1371. From OpenBSD and Ezra Story <ezy@panix.com>.
1999-10-27 13:20:34 +00:00
91cbb40ee5
Add AC97 mixer/codec support. From OpenBSD and FreeBSD.
1999-10-27 13:18:02 +00:00
91b09f5b16
Change cardbus API. The first argument of cardbus_mapreg_map() is
...
changed to struct cardbus_softc * from cardbus_devfunc_t. The old
function is renamed to Cardbus_mapreg_map().
1999-10-27 10:04:41 +00:00
7b66141eed
Use opt_cardbus.h for cardbus.c and opt_cardslot.h for cardslot.c.
...
Remove unnecessary include from cardbus.c.
1999-10-27 09:29:18 +00:00
5cf97491d8
Add a temporary kludge to recognize PMAGD (HX+) as 'sfb' hoping 8bpp
...
configration of it is compatible enough with PMAGB-BA.
1999-10-27 04:32:35 +00:00
0263d8db3d
Do not stop no matter when pci_mapreg_map fails to map bridge socket
...
registers. When it fails, reset Socket Base Address register and map
registers using rbus.
1999-10-27 00:48:36 +00:00
fb6f289535
nuke a debug printout I thought was already gone
1999-10-26 22:23:20 +00:00
29dd0803eb
allow to wildcard the serial channel
1999-10-26 18:20:44 +00:00
0247fe44f6
regen
1999-10-26 12:35:14 +00:00
7254017312
remove duplicate entry
1999-10-26 12:34:41 +00:00
9eed0f5d8a
change PMAF-F to PMAF-FA for consistency, add some more stuff
1999-10-26 12:23:13 +00:00
95c618a810
- Fix bogus cursor drawn by sfb_cursor(). From eye-opening input from R.C.
...
Dowdeswell.
- Remove write memory barriers in sfb_copyrows() as dst. is always distant
enough from src. for copying rows.
1999-10-26 10:57:04 +00:00
b4fc704a74
avoid cast
1999-10-25 19:39:54 +00:00
jun