0f0fbfa802
Roll core version minor. Clean out some target mode stuff. Respecify some
...
queue related functions to take u_int16_t's. Restructure the softc a bit.
1999-12-04 03:06:05 +00:00
f5c2acedc2
(wow- I thought I'd already committed most of this).
...
Clean up some isp_attach time stuff- if ISP2100_FABRIC is defined try *really*
hard to make sure that we get the firmware state to FW_READY and see the
loop state where the Port Database is ready to be gathered- if we don't do
this it's unlikely we will be able to correctly query the nameserver because
we won't see that we're on a fabric.
Clean up the completely broken and stupid attempts to hot switch the
'slow' start routine out of the way. Sigh.
Turn speed announcements into CFGPRINTF functions (available only if DEBUG
defined).
1999-12-04 03:04:59 +00:00
e363023daf
Rearrange defines to make the file diff cleaner with OpenBSD. Change CFGPRINTF
...
and default verbose levels. Add in a forced compile in f/w define unless
either IS_DISABLE_FW or ISP_COMPILE_FW defined.
1999-12-04 02:59:29 +00:00
e6da5abb16
Add back in inclusion of microcode and rationalize it. request/response
...
queue indices need to be u_int16_t wide.
1999-12-04 02:56:30 +00:00
e5835e36c3
request/response queues now indexed via u_int16_t. Add back in f/w inclusion
...
and clean up it's compilation. get chip rev out of pci header.
1999-12-04 02:54:54 +00:00
878fa4790f
Fix "make includes" since pckbc moved to dev/ic from dev/isa
...
(Hi, Jason!)
1999-12-04 02:16:24 +00:00
97cb535e46
change comment to mention that this driver also handles the '558 and '559
1999-12-04 02:02:30 +00:00
4560ac465a
Split the PC-like keyboard controller driver into chip back-end and
...
bus front-end.
1999-12-03 22:48:22 +00:00
eab9ce05b7
A PCI Revision ID of 0x02 is what ESS happens to be calling ES1946 Revision E.
1999-12-03 22:34:28 +00:00
04debef27a
add back firmware with BSD style copyright as approved by Qlogic
1999-12-03 21:48:49 +00:00
d8719f61c9
Get ready for some needed flexibility; put the IRQs to use for each slot
...
in the softc.
1999-12-03 19:02:49 +00:00
54c58da2e5
The first order approximation of PMAGD SFB+ framebuffer. Proven not
...
working with 32bit PMAGD TURBOchannel option card (I got rainbow
colour virtical stripes on screen).
1999-12-03 09:50:53 +00:00
901e4b0219
Fix IOASIC DMA alignment problems. Buffers not aligned on doubleword (8
...
byte) boundaries don't work correctly. Make use of the SDR0/SDR1 registers
to adjust the buffer alignment when starting the DMA transfer. Block device
I/O done by the filesystems will usually be aligned correctly, but character
device I/O may not be aligned correctly. This should fix the problems with
dump(8) failing randomly on DECstations.
1999-12-03 04:26:17 +00:00
bed152a4e7
We don't support RF_DAG_TEST_ACCESS.
1999-12-03 03:35:30 +00:00
128e2e90c5
Nuke some duplicate code.
1999-12-03 03:18:45 +00:00
a038f90588
Kernel memory is not to be wasted. If we're bailing out because of an error,
...
give any allocated memory back to the kernel so someone else can use it.
1999-12-03 03:06:44 +00:00
3888a71ad1
Move LIST_INIT() to a more appropriate place.
1999-12-03 02:43:22 +00:00
a00a9ff012
Convert to use rasops/wsfont, enabling colors.
...
For now, only the "putchar" and "copyrows" accelerations are used.
1999-12-02 23:04:44 +00:00
5c69a4c489
-initialize the colormap completely at compile time, to allow drivers
...
to use it early
-now we can declare it "const" (as "rasops_isgray[]", while we are here)
-don't use the fg/bg colors in ...alloc_attr() if the WSATTR_WSCOLORS
flag was not given - use reasonable defaults instead
-add an opaque "ri_hw" member to "rasops_info", for driver use
1999-12-02 22:57:13 +00:00
02faf8d588
Done something half sensible if a USB console keyboard is unplugged instead
...
of panic()ing.
XXX Untested. I will test it the next time I can borrow an iMac.
1999-12-01 23:22:57 +00:00
b687c3c859
Some more DIAGNOSTIC.
1999-12-01 23:19:11 +00:00
229f631a84
regen
1999-12-01 15:08:17 +00:00
1657f687be
add Cyclades 4Y and 8Y
1999-12-01 15:07:44 +00:00
a9aba751e7
Make it compile even if there is no wsdisplay.
1999-12-01 11:41:46 +00:00
b15fcce56c
Use vertical nscheduling for bulk traffic. It improves bulk thruput a lot.
...
From FreeBSD and Nick Hibma.
1999-12-01 00:42:05 +00:00
66a51bd133
Quiet down the "excessive collision" messages w/ LEDEBUG. None of the other
...
Ethernet drivers really report this quite as loudly as this did.
1999-12-01 00:40:53 +00:00
a7ee57948b
-support 3c905B-COMBO - somewhat preliminary: the chip has both an internal
...
MII PHY capable of NWAY (according to the Linux driver) and plain BNC/
transceiver connectors. The shared code can't handle this yet, so leave
out MII/NWAY for now.
-print out revision number from PCI config header, this has been useful to
identify buggy chips
1999-11-30 19:16:51 +00:00
9faac4111e
regen
1999-11-30 19:10:38 +00:00
b5db34e4d5
add 3c905B-COMBO
1999-11-30 19:09:54 +00:00
744ded4890
Register definitions for the PrestoServe option board (I've had this for
...
months and if it doesn't go here it'll die).
1999-11-29 15:06:28 +00:00
4763c00196
- Don't use our own private endian conversion cruft (from OpenBSD).
...
- SmartRAID V is not and will never be an EATA board (from OpenBSD).
- Use dpt_outl() when issuing EATA command packet address to HBA.
- Fix a style nit.
- Fix a typo.
1999-11-29 15:04:23 +00:00
42abf0bf78
regen.
1999-11-29 12:55:20 +00:00
1b6504a175
improve cnw driver, looking at bsdi/freebsd-pao cnw driver by wide+prb@bsdi.
...
- implement ioctls compatible with bsdi/freebsd-pao. stat type is
changed from u_int to u_quad_t to avoid overflows. now it is possible
to switch domain/encryption key from the userland, using cnwctl(8).
- implement multicast/promiscuous mode. tested with IPv6.
1999-11-29 12:53:59 +00:00
a075f72b0e
cnw driver ioctls, from FreeBSD/PAO2 repository
1999-11-29 12:40:59 +00:00
558c978dea
Const poisoning.
1999-11-29 07:50:54 +00:00
9c0f37b416
regen.
1999-11-29 02:28:55 +00:00
dd7b5aed5b
Support for TDK LAC-CF010
...
by Ichiro Fukuhara (ichiro@ichiro.org ) on kern/8900
ichiro test TDK CF Card on Opensource matsuri,tokyo and send patch to us.
thanx.
1999-11-29 02:28:19 +00:00
18f862c072
More USB_DEBUG and DIAGNOSTIC output.
1999-11-28 22:49:53 +00:00
0c3ecf8e5e
Improve Ultra/66 support now that I've got some docs from Promise.
1999-11-28 20:05:18 +00:00
7bd006b847
Improve a few debug messages.
1999-11-28 20:04:22 +00:00
54f42f17fc
Don't bother spinning in the console 'putc' routine for the transmitter
...
to become idle; it actually doesn't matter as the chip takes care of
this for us. It would also spin endlessly in certain circumstances
during shutdown.
While I'm here, (finally) add code to allow sending BREAK characters.
1999-11-28 12:23:18 +00:00
df56622ada
regen
1999-11-27 09:02:22 +00:00
3de779c46a
Add support for CS4235 codec as found on Intel KU440EX motherboard.
1999-11-27 09:02:13 +00:00
6f6045c97d
Regen.
1999-11-27 01:03:33 +00:00
8c5ab0744f
IBM cards update.
1999-11-27 01:03:18 +00:00
506836faa1
Regen.
1999-11-26 17:17:21 +00:00
71f7530292
Add two 3Com modems.
1999-11-26 17:16:53 +00:00
8f56b89950
More WDCDEBUG_PRINT.
1999-11-26 12:39:43 +00:00
97fc004770
Don't complain when umodemstartread() returns USBD_IN_PROGRESS. It's normal.
1999-11-26 09:12:50 +00:00
d94a5b55fb
Make timeout device exploration optional in debug mode.
1999-11-26 01:41:03 +00:00
77bb4d8ce2
Cosmetic change.
1999-11-26 01:40:01 +00:00
aa32088c20
Cosmetic changes.
1999-11-26 01:39:27 +00:00
240991073c
Generate an error message when attachment fails.
1999-11-26 01:38:40 +00:00
961d4d6ad2
Change CS4297 id entry.
1999-11-24 23:21:01 +00:00
df60fd6eac
Regen.
1999-11-24 23:18:07 +00:00
ae1dcc2dc0
Comment out some entries for Entrega serial adapters. These entries
...
are only relevant before firmware download.
1999-11-24 23:17:27 +00:00
c156651eb9
Avoid the special when disconnecting devices with no config descriptor.
...
It was wrong.
1999-11-24 23:14:39 +00:00
bb2a9b3008
Add some more debug printing.
1999-11-24 23:13:19 +00:00
881d3f4735
A little cosmetic.
1999-11-23 20:36:10 +00:00
2e175b3f88
Avoid 0 blocksize.
1999-11-23 08:38:30 +00:00
d617933e27
Round out our options with 4bpp framebuffer support, conditional
...
on RCONS_4BPP.
1999-11-23 01:52:52 +00:00
17971be39a
Don't used extern on uhcidebug and ohidebug variables.
1999-11-22 21:57:09 +00:00
17d170b1ca
defopt COM_DEBUG, COM_HAYESP, and COM16650
1999-11-22 03:53:38 +00:00
d5a471ccc9
Check presence of Sbus interrupt properties before using them.
...
Only one case is known to trigger this omission: a Sparc Classic
configured as X terminal.
1999-11-21 15:01:50 +00:00
cad52c9e08
Add a entry for Mobile Dock 2, which is 2.5" HDD adapter.
1999-11-21 10:13:08 +00:00
a65648a323
regen
1999-11-20 18:32:31 +00:00
35b90fb812
add Xircom CE3 10/100 Ethernet
1999-11-20 18:32:08 +00:00
40f7514028
Introduce wscons vsxxx mice (and possible tablet) routines; changes
...
of existing codes (lk201_ws.c, zskbd.c, and zsms.c) will follow.
1999-11-20 04:55:30 +00:00
f73590bbf0
Print the PnP id of unknown codecs.
1999-11-20 01:16:15 +00:00
14896709bf
Join two lines in the attach message.
1999-11-20 01:15:25 +00:00
7b92ed07bd
Propagate the USB revision number to the usb driver.
1999-11-20 00:57:08 +00:00
7479d29f00
Make the ThunderLAN and VIA Rhine drivers use the common MII bit-bang module.
1999-11-19 18:27:18 +00:00
f1ba0d46a3
Regen.
1999-11-19 18:26:22 +00:00
55495ae2e9
Add OUI for Enable Semiconductor.
1999-11-19 18:26:09 +00:00
0c3eefb6a5
Add a basic CardBus front-end for the `tlp' driver. Still more work to do.
1999-11-19 18:23:35 +00:00
9ed17102f4
- Use the common MII bit-bang module.
...
- Add support other than 128-byte SROMs.
- Add support for the 21142/21143 MII.
1999-11-19 18:22:42 +00:00
dc5a586c1c
Use the common MII bit-bang module.
1999-11-19 18:17:14 +00:00
d7496546b5
try to do a better job of figuring out the EEPROM size; the old code
...
didn't work on (some?) 557-based cards
1999-11-19 15:19:14 +00:00
3a220103e8
Adapt printf format for 64bit stats counters.
1999-11-19 10:42:48 +00:00
3386c68b46
Cosmetic changes and some small improvements. From FreeBSD and Nick Hibma.
1999-11-18 23:32:25 +00:00
b578473fae
include dev/cardbus/cardbusdevs.h
1999-11-18 16:57:41 +00:00
88d26dd881
regen
1999-11-18 16:03:43 +00:00
08bc681319
fix bogus comment
1999-11-18 16:03:12 +00:00
175087230a
use CARDBUS_VENDOR_INVALID
1999-11-18 15:11:15 +00:00
8c62b47d9f
regen
1999-11-18 15:09:59 +00:00
40f1a07541
add INVALID vendor, and an Intel modem
1999-11-18 15:09:30 +00:00
38acee1010
Cope with new return value of pcmcia_scan_cis(). (Actually, it's not
...
so new but at least newer when I wrote these code).
1999-11-18 14:25:28 +00:00
f38640f00f
Add some comments and reformat comment which doesn't confirm KNF.
1999-11-18 14:20:11 +00:00
5fd68b5d02
We must initialize bp->b_dep in InitBP().
1999-11-18 13:28:06 +00:00
cdaec29859
A few more purely stylistic changes that I missed in the last round.
1999-11-17 23:00:49 +00:00
08aacd4e6f
Regen.
1999-11-17 22:59:30 +00:00
206c85df58
Add CATC analyzer.
1999-11-17 22:59:04 +00:00
916d6aaa36
Use the common MII bit-bang module.
1999-11-17 17:56:52 +00:00
6c50cb64e1
Common module for bit-bang'ing the MII.
1999-11-17 17:47:59 +00:00
ba7e45647d
Initialize buffer dependencies list for soft updates when initializing
...
a new buffer.
1999-11-17 09:34:03 +00:00
ce25407921
Make this a lot more like the PCI front-end.
1999-11-17 08:49:16 +00:00
f361f1b1b8
Also disable EX_CONF_INTPHY on the B model.
1999-11-17 08:42:06 +00:00
5bd0644a68
Make the MII code match the `ep' driver's (*again*).
1999-11-17 08:03:30 +00:00
e1a760a4a7
The 3c575-TX does *not* have an internal PHY.
1999-11-17 07:59:57 +00:00
fca16d1571
Move the "Attach the interface" section after printing the mac address
...
and buffer sizes. Stops the ipv6 attach info from messing up the
other driver info.
1999-11-17 03:42:24 +00:00
mjacob