jdolecek
4db9600c94
use hd0a instead sd0a in 'help' command example
2001-06-02 14:56:13 +00:00
manu
4788337ddb
Fixed a rough buf in ptrace SETFPREGS (was using regs instead of fpregs)
2001-06-02 13:49:44 +00:00
matthias
af667cdd42
The io offsets in arm32/isa/timerreg.h included the IO_TIMER1 offset.
...
With dev/ic/i8253reg.h this is not the case.
Add IO_TIMER1 to all offsets used in inb and outb. This fixes port-arm32/13009.
2001-06-02 12:51:28 +00:00
bjh21
fd7e9d6d32
Clean up hcsc_match: Don't check the manufacturer ID, since podule IDs are
...
unique anyway. Do check whether the description starts with "SCSI", since
HCCS used the same ID for their IDE podule.
2001-06-02 12:07:34 +00:00
jdolecek
58467b0a9d
Slighly improve the PTRACE_CONT comment
2001-06-02 11:46:09 +00:00
bjh21
e9ff9b9d73
Enable disconnect/reselect (now that it works) and parity checking.
2001-06-02 11:43:40 +00:00
bjh21
68035f55f1
In DEBUG kernels, catch page faults in interrupt handlers early.
2001-06-02 11:17:32 +00:00
bjh21
c81d426dcf
Save R14 (in a proper stack frame) around {read,write}_multi_1, since page
...
faults can corrupt it on arm26.
2001-06-02 11:15:56 +00:00
bjh21
447793851c
Add hcsc to every configuration that has SCSI podules.
2001-06-02 10:48:54 +00:00
bjh21
972ef526d2
Add hcsc, scsibus and some SCSI devices.
...
Also, add some useful compiler options to FOURMEG.
2001-06-02 10:47:55 +00:00
bjh21
2d35661e6a
Use write_munti_1() to implement bus_space_write_multi_1().
2001-06-02 10:45:43 +00:00
bjh21
ac0d39dfe8
Add write_multi_1().
2001-06-02 10:44:56 +00:00
bjh21
3df8e425e7
Correct permissions on vmapbuf'ed pages. A read from a device is a write to
...
memory, and vice versa.
2001-06-02 10:44:02 +00:00
jdolecek
40033835d8
Comment DIAGNOSTIC, DEBUG out
...
Use the 'root on ? type ?' config by default, leave the nfs one commented out,
add line for root on ed0a
2001-06-02 10:37:27 +00:00
kim
549a254824
It is misleading that the kernel outputs "DHCP server:" followed by
...
the value of "next-server" from the DHCP (or BOOTP) reply. This is
not the DHCP server's IP address (except by chance), so instead of
"server" make it print "next-server".
2001-06-02 01:52:10 +00:00
chs
9bde6cff5c
remove bogus curly braces from a structure forward-declaration.
2001-06-02 01:19:29 +00:00
thorpej
2da55b9a39
Define some extra configuration block bits used on the i82550 (a.k.a.
...
PRO 100/S), including the extended RFA format. Don't hard-code the
RFA size to allow us to use the extended format in the future.
2001-06-02 01:04:01 +00:00
jdolecek
f6af05f407
Back the last revision off, upon Bill Sommerfeld's request
2001-06-02 00:46:00 +00:00
jdolecek
5dbe622e77
When polling, raise priority level to tty, to block keyboard interrupts
...
when the system is "warm", i.e. interrupts are not blocked anymore.
This seems to be necessary on my PS/2 Model 70 keyboard - without this,
system ends up in endless loop calling the keyboard intr routine if a key
is pressed when polling. This _may_ be just specific to level-triggered
interrupts PS/2 MCA uses, though it's more likely it's just the way the
particular keyboard controller works.
Discussed on tech-kern@.
2001-06-02 00:01:04 +00:00
jdolecek
b001ce9b90
g/c COMPAT_OLDBOOT from bootblocks, sprinkle some const
...
bump bootblock version to 2.10
2001-06-01 23:26:30 +00:00
jdolecek
09afb2735c
Add recently added linux_time.c to list
2001-06-01 23:02:55 +00:00
thorpej
7e716e6849
Memory map and register definitions for the Algorithmics BONITO
...
MIPS memory and PCI controller. This file is provided by Algorithmics.
2001-06-01 20:29:33 +00:00
thorpej
2b5df8b7ff
vm_page_t -> struct vm_page *
2001-06-01 19:52:54 +00:00
itojun
5fbaedc40d
sync with GENERIC 1.405
2001-06-01 16:50:31 +00:00
thorpej
33a6994da1
Driver for Broadcom BCM5400-family Gig-E PHYs. Programming
...
information gleaned from FreeBSD.
2001-06-01 16:49:59 +00:00
thorpej
71cb790fb5
Add support for the Algorithmics P-4032 board. This is totally
...
untested, since I have no P-4032 board, but it's no worse than
the current situation, which is "totally non-working P-4032
support in the ARC port, of all places".
2001-06-01 16:00:03 +00:00
thorpej
23a3dc1508
If a bus doens't want to use an extent, don't force it to.
2001-06-01 15:57:31 +00:00
thorpej
356699e86b
Fat-trimming.
2001-06-01 15:30:11 +00:00
thorpej
c702830c42
The P-4032 has no ISA bridge/bus, so remove all P-4032 conditionals.
2001-06-01 15:20:06 +00:00
toshii
07187f8a43
Nuke FRAMEBUF_HW_BASE. This value is provided by the bootloader.
2001-06-01 14:08:35 +00:00
toshii
6349d0ae81
Nuke FRAMEBUF_{HW_,}BASE. This hack does no good.
2001-06-01 14:06:43 +00:00
toshii
ea77ec5725
Move some low-level code (SVC mode switching and PID address translation
...
disabling) which was written using inlined asm in initarm() to just after
the kernel entry point.
2001-06-01 14:04:29 +00:00
haya
1331bcc296
cardbusvar.h is divided into two files: cardbusvar.h and cardbusreg.h.
2001-06-01 10:30:37 +00:00
bouyer
88f3192778
Fix typo in sddump() which caused core dumps to fail with ENXIO.
2001-06-01 08:39:54 +00:00
scw
78aad8f79e
Mark evcnt(9) item as done.
2001-06-01 08:31:07 +00:00
itojun
781f6920ab
use default hoplimit when incoming interface is not given to icmp6_reflect.
...
sync with kame
2001-06-01 05:54:19 +00:00
simonb
37326d639b
Rename assembly files that are pre-processed by cpp to use an S suffix.
2001-06-01 04:20:04 +00:00
thorpej
9f159a8918
Remove 4096-byte gap between .reginfo and .data, suggested by
...
Ian Taylor <ian@zembu.com>.
2001-06-01 03:55:30 +00:00
thorpej
f4f6c1dd1c
Enable SCSI.
2001-06-01 03:53:29 +00:00
toshii
76b3b49bb8
Add support for jornada720's framebuffer.
...
The functionality is almost same as bivideo, and hardware rasops and
power saving are not yet supported.
2001-06-01 02:51:03 +00:00
simonb
b3e7ecfd97
Delete the XXX'd includes of <dev/isa/isavar.h> and <sys/kernel.h>.
...
These aren't needed. Tested on i386 and alpha.
2001-06-01 00:38:31 +00:00
tron
264d7e1264
Install "dev/scsipi/scsipi_cd.h" again because it is e.g. used by the
...
CD player include in version 2.x of the "kdemultimedia" package.
2001-05-31 21:54:07 +00:00
soda
f57a0847d2
fix off by one error. extra one page is needed for the case where
...
buffer is not page aligned (e.g. raw i/o case).
2001-05-31 20:56:29 +00:00
thorpej
996df042df
Add support for the DP83815 MacPHYTER internal PHY to the DP83843 PHYTER
...
driver, since for our purposes, they are compatible.
2001-05-31 20:30:21 +00:00
soda
ea2e5754dd
missing opt_inet.h
2001-05-31 19:56:13 +00:00
soda
9bac50748f
"opt_ddb.h" should be included at the beginning of source file,
...
because some headers (in this case <systm.h>) refers symbols (e.g. DDB)
defined in the opt_ddb.h
2001-05-31 19:41:57 +00:00
thorpej
1042f830e5
Regen; added several more PHYs.
2001-05-31 19:41:07 +00:00
thorpej
0c94166e28
Add several additional PHYs.
2001-05-31 19:40:33 +00:00
thorpej
f752c7d328
On the Gig PHYTER, For whatever reason, the 10baseT-related bits of the
...
BMSR are wired to 0, yet the PHY supports 10baseT. So, to get around
this, we test the ANAR 10baseT bits after a PHY reset. These bits are
set according to input pin 180. If we see the 10baseT ANAR bits set,
we fake them in the BMSR so that we can actually autonegotiate 10baseT.
2001-05-31 18:47:22 +00:00
scw
59ba4788ce
Deprecate intrcnt/intrnames in favour of the generic evcnt(9) interface.
2001-05-31 18:46:07 +00:00