bjh21
4aec2a6382
Regen: Morley user/analogue.
2002-03-09 13:45:13 +00:00
bjh21
903ce8c1e3
Add Morley user/analogue podule.
2002-03-09 13:44:09 +00:00
toshii
f9d3d32c2e
Fix splaudio/splx botch.
2002-03-09 07:25:41 +00:00
ichiro
f0c89eaf40
add device
...
TDK USB-PHS Adapter UHA6400
2002-03-09 06:06:11 +00:00
tacha
767679dbe9
Add new two convert functions slinear16_to_alaw_[lb]e.
2002-03-09 05:39:00 +00:00
martin
dfbd0bc7b8
Shuffle around some initialization code a bit.
...
Configure power supply on VPP1 at 5V when powering up a socket.
Get rid of stray interrupts.
Make the driver quiet for normal operation when not in debugging mode.
This makes ray0 at nell0 actually work when compiled with RAY_USE_AMEM=1.
2002-03-08 21:33:43 +00:00
thorpej
a180cee23b
Pool deals fairly well with physical memory shortage, but it doesn't
...
deal with shortages of the VM maps where the backing pages are mapped
(usually kmem_map). Try to deal with this:
* Group all information about the backend allocator for a pool in a
separate structure. The pool references this structure, rather than
the individual fields.
* Change the pool_init() API accordingly, and adjust all callers.
* Link all pools using the same backend allocator on a list.
* The backend allocator is responsible for waiting for physical memory
to become available, but will still fail if it cannot callocate KVA
space for the pages. If this happens, carefully drain all pools using
the same backend allocator, so that some KVA space can be freed.
* Change pool_reclaim() to indicate if it actually succeeded in freeing
some pages, and use that information to make draining easier and more
efficient.
* Get rid of PR_URGENT. There was only one use of it, and it could be
dealt with by the caller.
From art@openbsd.org .
2002-03-08 20:48:27 +00:00
kent
ad276dda9e
free_all_endpoints(): Fix a problem with disabled device.
2002-03-08 17:24:06 +00:00
ad
dbd8140c1f
PR 15552: don't explode if the board fails to respond during initalization.
2002-03-08 11:37:04 +00:00
thorpej
4c3cc0bfe3
Fix printf format on LP64.
2002-03-08 02:30:54 +00:00
christos
833f408cd1
stupid void pointers... tl_init() needs struct ifnet *...
2002-03-07 21:42:20 +00:00
kent
c329c38eef
Sampling rate and mono-stereo conversion described in
...
http://mail-index.netbsd.org/tech-kern/2002/03/04/0005.html
auconv.c: Add conversion functions
audio.c: Sample alignment, calling conversion functions, etc.
audio_if.h: Add four hw_* members to "struct audio_params"
audiovar.h: Add conversion buffers, etc.
auich and uaudio: Add conversion request code to *_set_params().
2002-03-07 14:37:02 +00:00
mjacob
1d228ae84c
Disable RIO (reduced interrupt operation) for 2200 boards- it seemed like
...
it worked- but I ran into a case with a 2204 where commands were being lost
right and left. Best be safe.
For target mode, or things called if we call isp_handle_other response- note
that we might have dropped locks by changing the output pointer so we bail
from the loop. It's the responsibility of the entity dropping the lock to
make sure that we let the f/w know we've read thus far into the response
queue (else we begin processing the same entries again- blech!).
2002-03-07 00:14:04 +00:00
frueauf
089f361f5b
Make this work after it got broken a year ago in r1.15 (pasto?):
...
In qeattach() sc->sc_rb.rb_dmabase needs to be set after the buffer got
loaded via bus_dmamem_map(), not before.
Fixes my own pr kern/15817.
2002-03-06 19:10:58 +00:00
jmcneill
9481b68d9a
Fix another typo that I missed last time (foo -> ESA_foo)
2002-03-06 18:30:31 +00:00
jmcneill
b9083c85dc
Fix a few typos (foo -> ESA_foo).
2002-03-06 18:28:07 +00:00
uch
3d0f70f7fc
remove ite8181video's bivideo dependency.
2002-03-06 15:00:04 +00:00
dbj
5c7e9abe49
return EINPROGRESS instead of EINVAL when trying to read
...
the results of an AP scan that is not finished
2002-03-06 14:41:39 +00:00
tsutsui
c155b0375f
Major overhaul of trm(4) driver:
...
- Change structures for each device to make them more suitable with
our scsipi mid-layer.
- Use ADAPTER_REQ_SET_XFER_MODE callback.
- Cleanup misc functions/structures/style.
XXX Tagged queuieng support is disabled for now.
XXX Maybe we should have common library of the scsi protocol engine
XXX to share it among all other drivers..
2002-03-06 12:32:49 +00:00
itohy
1990961dc9
Fix ADPCM playback/recording.
2002-03-06 07:12:02 +00:00
nathanw
2a72ef3147
Remove a variable that is unused after the previous ALTQ commit.
2002-03-06 05:33:05 +00:00
haya
cff90ff521
Enforce 10-bit width for I/O addresses of 16-bit PC Cards when I/O
...
start address is assigned by a driver.
2002-03-05 11:56:33 +00:00
itojun
ac36f7cb2c
bring in latest ALTQ from kjc. ALTQify some of the drivers.
2002-03-05 04:12:57 +00:00
martin
877cb55678
regen (ELSA MicroLink mc all added)
2002-03-04 16:42:19 +00:00
martin
b2b090d6b2
Add ELSA MicroLink mc all (ISDN + modem) card, OEMd from TDK.
2002-03-04 16:41:50 +00:00
simonb
64c7743a05
Don't "extern int cold;" - this is in <sys/kernel.h>.
2002-03-04 02:19:07 +00:00
dbj
47b3797fe7
Don't attempt to gather unrequested statistics.
...
Allow SIOCSWAVELAN with WI_RID_IFACE_STATS to request
an immediate statistics update.
We might in the future want to have SIOCGWAVELAN with
WI_RID_IFACE_STATS return an error if a statistics gathering is in
progress. Then the caller could request fresh statistics and gather
them when they are done. Instead, we currently just return whatever
statistics are available, which may be up to 60 seconds old.
2002-03-04 01:56:12 +00:00
wiz
1b7f309f0a
Correct misspellings of "failed".
2002-03-04 01:38:31 +00:00
dbj
e9d22f79b0
fix byte swapping when gathering statistics
...
this should complete the fix to pr 14385
AP scanning and statistic gathering should work on le hosts now
2002-03-04 01:33:17 +00:00
dbj
918b9d4dec
correctly handle AP scanning result when there are no APs
2002-03-04 01:30:04 +00:00
dbj
0dca7b4f6d
used %02x instead of %x when printing out BSS ids
2002-03-04 01:21:07 +00:00
dbj
0812667818
s/Faild/Failed/
2002-03-04 01:19:24 +00:00
augustss
e4ca1c8a44
Use the correct pointer for the timeout abort.
2002-03-04 00:53:33 +00:00
martin
42172d9f1c
Try to configure timing correctly.
...
Get rid of some ad hoc debuging printfs.
2002-03-03 22:47:28 +00:00
takemura
29e873a235
Added wsmux_set_display() to fix the problem that wskbd wan't connected
...
to any display if keyboard was attached before display and both aren't console.
2002-03-02 08:22:26 +00:00
manu
f48c7db878
Two more trivial bug fixes:
...
- copyin() the ntv argument to ntp_adjtime1(), to avoid some panics
- correctly handle the return value
And this still relates to kern/15519
2002-03-01 22:58:33 +00:00
bouyer
5d5c5c0ddd
As siop_morecbd() is called from the kernel thread, protect access to the
...
queues with splbio.
2002-03-01 21:37:03 +00:00
kleink
6d484242b0
Regen: add Motorola Raven, Falcon and Hawk product IDs.
2002-03-01 13:48:59 +00:00
kleink
b1c2f47c30
Add Motorola Raven, Falcon and Hawk product IDs.
2002-03-01 13:47:30 +00:00
martin
a03fa01ccc
Remove EBUS_PADDR_FROM_REG, as it does not realy creates a paddr on sparc.
...
It is superceeded by EBUS_ADDR_FROM_REG.
2002-03-01 11:49:06 +00:00
martin
ba6fe47ae9
Simplify the way the hardware windows are mapped and adapt the pcmcia
...
chipset functions acordingly. Initialize timing registers (for now to
the slowest possible setting).
Add some debug output. XXX - clean this up.
This is not ready for prime time, but I can attach ray0 and wi0 now in my
LX.
2002-03-01 10:02:38 +00:00
enami
fa5084d17e
Make this file compiles w/o FWNODE_DEBUG.
2002-03-01 01:01:18 +00:00
thorpej
8c51a03d7e
If the upper layer says Write/Invalidate is okay, then make sure
...
it's enabled in the PCI CSR.
2002-02-28 23:52:37 +00:00
jmcneill
f58e1d41e1
Regen
2002-02-28 21:10:51 +00:00
jmcneill
f3b42effa5
Add Linksys Wireless USB Network Adapters (WUSB11, both original and ver 2.5)
2002-02-28 21:10:28 +00:00
thorpej
2ba5de1eb1
Change the default Rx FIFO drain threshold to 128 bytes; this
...
reduces the likelihood of Rx FIFO overruns on machines with wimpy
PCI busses, while still allowing the interface to burst with a
reasonable size.
2002-02-28 20:08:11 +00:00
thorpej
07e108c7dc
* On the DP83820, make sure to make the Tx DMA map large enough for
...
jumbo frames.
* Work around broken PXE firmware on some boards, which leave the ROM
BAR enabled even after the PXE stack has been unloaded.
* Set up the initial values for sc_tx_fill_thresh, sc_tx_drain_thresh, and
sc_rx_drain_thresh in sip_attach(), rather than in sip_init().
2002-02-28 19:10:16 +00:00
thorpej
c49eaa2724
Don't use NULL for non-pointer arguments.
2002-02-28 04:49:16 +00:00
junyoung
66900b849e
Regen.
2002-02-28 03:40:43 +00:00
junyoung
c1670f1122
Oops, readd an ID for Rage XL which was removed in previous commit.
2002-02-28 03:39:37 +00:00
junyoung
36dc3b5f36
Regen; fix for duplicate ATI Rage Pro.
2002-02-28 02:34:15 +00:00
junyoung
1ce4367071
Better fix of duplicate ATI Rage Pro IDs. `_B' and `_P' mean BGA and
...
PQFP, respectively.
2002-02-28 02:32:50 +00:00
christos
d487168d5f
PR/15754: Sean Davis: Initialize if_softc before calling the mii init
...
routines to avoid NULL pointer de-referencing in the callbacks.
2002-02-28 00:52:21 +00:00
augustss
da0af33867
Change mapping of keycode 50 to be closer to the spec.
2002-02-28 00:30:13 +00:00
augustss
27cee6c777
Regen.
2002-02-27 23:29:01 +00:00
augustss
f2afa010b1
Add some more stuff that might make Palm and Sony devices work.
...
(Gleaned from Linux.)
2002-02-27 23:00:03 +00:00
augustss
50a7e169bc
Add Palm m125.
2002-02-27 22:45:16 +00:00
martin
fe3a97c935
regen
2002-02-27 21:01:55 +00:00
martin
b6b3e04f66
Avoid duplicate define for ATI Rage Pro PCI
2002-02-27 21:00:28 +00:00
junyoung
53e222d45c
Regen.
2002-02-27 16:38:08 +00:00
junyoung
ab2517393d
Fully revise product IDs for ATI Mach64 and Rage graphics cards.
...
XXX Rage 128 not revised.
2002-02-27 16:36:41 +00:00
augustss
5d2b04bb42
Move the interrupt bailout when a cancelled ii is found.
2002-02-27 12:42:41 +00:00
augustss
5663022c32
Remove spurious splusb().
...
Lower abort hardware wait.
2002-02-27 12:12:45 +00:00
jmc
71b05541b5
Initial layout for SBP2 routines. Mainly just the code yanked from fwnode.c
...
so it's not lost.
2002-02-27 05:12:11 +00:00
jmc
6cf5c78fa4
Basic prototype/beginning of firewire disk support using sbp2/scsi. Commiting
...
to have a baseline.
2002-02-27 05:11:27 +00:00
jmc
40cba409bb
Change/pretty up some debugging info.
...
Also, add unit location fields to the ROM image. The p1212 spec requires
unit locations if you have 2 or more unit directories which is the case for
ipv4 and ipv6 compiled into a kernel.
2002-02-27 05:09:15 +00:00
jmc
f04610f130
Move definition of if_fw fifo location to ieee1394reg.h as it's needed for
...
filling in unit location in the rom.
XXX: This all is really too welded together. The if_fw code should be
decoupled from this and simply be handed a method by which it can provide
the config rom back to the main code.
2002-02-27 05:07:25 +00:00
jmc
d455d6316d
Add 3 more macros for extracting info from bus info block
2002-02-27 05:05:39 +00:00
jmc
ea96c58797
Change length values to u_int32_t
2002-02-27 05:04:28 +00:00
jmc
ed05bf459e
Rototill fwnode.c to rely on the p1212 routines to parse and validate the ROM
2002-02-27 05:02:25 +00:00
jmc
8140d3a6bb
Note done sections related to fwnode/ieee1212 stuff
2002-02-27 05:00:55 +00:00
jmc
2d478bd8d8
Move over from std to here
2002-02-27 05:00:00 +00:00
jmc
524644efa7
SBP is a firewire/ieee1394 specific protocol, not a generic standard. Move this
...
to the ieee1394 directory
2002-02-27 04:59:29 +00:00
jmc
b1eeba63dc
Initial checkin.
...
A framework for parsing p1212 compliant ROM's and returning a tree that
describes it. Include routines for searching the tree, walking it to
apply functions against nodes and printing out the tree.
Also provide a utility routine to take all the unit dirs present in a ROM,
loop against them and present them to config_found to configure all possible
sub devices.
2002-02-27 04:58:50 +00:00
jmc
00ea0581b5
Add a few more extraction macros and begin the ALLOW list of flags for
...
overriding specific checks in p1212_parse
2002-02-27 04:55:58 +00:00
augustss
0357a44190
Avoid a race condition spotted by UCHIYAMA Yasushi <uch@vnop.net>.
2002-02-27 01:30:50 +00:00
christos
5d823a2299
Start of mi /dev/{mem,kmem,zero,null} driver. We add an ioctl entry, because
...
we don't want to throw an error when FIONBIO is requested. We also allow
FIOASYNC clear.
2002-02-27 01:16:14 +00:00
jmcneill
cc72a54933
Add constraints to allow for disabling PS/2 mouse powerhooks. As requested
...
by Chuck Cranor.
To disable powerhooks with the pms and pmsi drivers, respectively:
options PMS_DISABLE_POWERHOOK
options PMSI_DISABLE_POWERHOOK
2002-02-27 00:30:07 +00:00
itohy
4283f00882
1. Change equalizer (treble, bass) to be ``flat'' if the values set at
...
the center position (128), so as to be compatible with other drivers.
The equalizer is enhancement only, and the values < 128 don't take
any effect.
Yeah, this causes spec change....
For equalization.treble and equalization.bass, the relation between
old and new value is
new_value = (old_value / 2) + 128.
(Note this does not apply to equalization.surround.)
2. Support ++ and -- of mixerctl(1) for stepping volume variables.
3. Fix problem where the chip is not powered up
when the mic input is unmuted.
2002-02-26 14:57:36 +00:00
joda
b57f5ccbca
in esa_resume, call esa_codec_reset; makes it much more happy after a
...
suspend on my O500 (snatched from FreeBSD)
2002-02-26 11:05:05 +00:00
augustss
ae9f835cf2
A small fix for FreeBSD.
2002-02-26 10:27:49 +00:00
augustss
2c66bc238b
Fix a typo that prevented timeout in control requests from working.
...
Spotted by Alfred Perlstein <bright@mu.org>.
2002-02-26 10:22:48 +00:00
dbj
2622b21584
use #ifdef WI_DEBUG instead of #if WI_DEBUG
2002-02-26 09:29:18 +00:00
dbj
44ab750650
avoid walking full length of unknown stats structure.
...
this partially addresses pr14385.
there is still a byte swapping bug retrieving the
stats structure. Since both the type and the length
are incorrectly swapped, we would timeout while reading
an extra long section (caused by the byteswapped length)
of garbage data.
turning on WI_DEBUG now just reports the unknown info type
which can be seen to be obviously incorrectly swapped
on macppc
2002-02-26 09:18:54 +00:00
augustss
ab875c9c5c
Some minor fixes from FreeBSD.
2002-02-26 02:00:16 +00:00
augustss
97e6cc6f72
Fix an uninitilized request. From Alfred Perlstein <bright@mu.org>.
2002-02-25 22:39:01 +00:00
manu
f8e0ee9efc
Fixes a bug in argument passing to ntp_adjtime1. patch submitted by
...
paul@Plectere.com (see kern/15519)
2002-02-25 21:16:36 +00:00
kleink
9e8cc352a9
Update datasheet URLs.
2002-02-25 17:37:47 +00:00
ad
3f78ffdeca
Argh, dont reference any wscons parts in files.dec yet.
2002-02-25 17:11:17 +00:00
ad
f89bb3064e
Move the dz driver to dev/dec, since it can be shared with pmax.
2002-02-25 14:58:06 +00:00
augustss
306aa99ff8
Some portability improvement.
...
Add define for usb.h version.
2002-02-25 00:46:37 +00:00
ad
a66008a0b5
Add WSMOUSE_TYPE_MAXINE.
2002-02-24 02:01:40 +00:00
kleink
764103c61c
Regen: add IBM 82660 PowerPC to PCI Bridge and Memory Controller.
2002-02-24 01:44:00 +00:00
kleink
914e8aef4a
Add IBM 82660 PowerPC to PCI Bridge and Memory Controller.
2002-02-24 01:42:36 +00:00
scw
c4dbe1a160
Allow MD code to provide functions for reading/writing NVRAM/RTC
...
locations. If passed NULL, the old behaviour using bus_space_{read,write}_1()
is used. Otherwise, all access to the chip goes via the MD functions.
This is necessary for mvmeppc boards where the mk48txx NVRAM/RTC is not
directly addressable.
2002-02-23 17:18:54 +00:00
ad
b13d5cf210
Fix typo in previous.
2002-02-23 14:05:02 +00:00
martin
8af2b425a2
Add a missing call to isapnp_config().
...
Do not hardcode IST_EDGE, use the type from the attach args.
Noticed by Christos Zoulas.
2002-02-22 21:26:47 +00:00
christos
df34bbcc7a
Regen
2002-02-22 17:13:46 +00:00
christos
5cdee96e49
PR/15701: Mike Wlodarczyk: ISAPNP data for another SupraExpress 56I SP V.90
2002-02-22 17:13:26 +00:00
ad
287977b3d2
Replace one of two divide ops with an AND when calculating the XYMASK
...
address.
2002-02-22 16:05:27 +00:00
mjacob
91f80cf3fc
Implement F/W crashdumps for 2200 && 2300 cards (kernel compile option).
...
Distinguish between 2312 and 2300 cards (they *are* different). Enable
RIO (Reduced Interrupt Operation) for the LVD cards (hey- I've seen
batched completions of the 30 commands at a time with this,....)...
If we get a Port Logout on local loop topologies, we have to force the
f/w to log back in. The easiest way (for us) to do this is to force
a LIP. This also will wake up the disk that probably just had a f/w crash.
Implement mailbox 'continuations'- this allows interrupts to re-drive
a mailbox command if it's one that just essentially repeats the previous
mailbox command (e.g., f/w download). This saves a boatload of sleep/wakeup
twitches.
If we're not a 2300 and we're about to return with a 'bogus interrupt'- check
the semaphore register to be non-zero at all and outgoing mailbox 0- this
seems to be where some of the lost ISP1080 commands came from.
2002-02-21 22:32:40 +00:00
kleink
e9dc13b243
As discussed with Jason Thorpe: while the `cacheline_size\' argument is
...
a byte-size quantity, the CacheLine Size configuration register specifies
the system cacheline size in units of 32-bit words; per PCI Local Bus
Specification, rev. 2.1, section 6.2.4.
2002-02-21 20:22:48 +00:00
enami
147331af13
Fix broken indentation.
2002-02-21 05:30:30 +00:00
simonb
b0a8050029
regen: Use BCM prefix instead of SB prefix in previous.
2002-02-21 00:00:28 +00:00
simonb
1d958329b8
Use BCM prefix instead of SB prefix in previous.
2002-02-20 23:59:58 +00:00
simonb
1df79a37a8
regen: Add the SiByte/Broadcom SB1250 PCI and LDT bridge IDs.
2002-02-20 23:53:32 +00:00
simonb
034caadcd2
Add the SiByte/Broadcom SB1250 PCI and LDT bridge IDs.
2002-02-20 23:53:01 +00:00
simonb
ee0bfb00bf
regen: Rename the SIBYTE entry to "Broadcom Corp. (SiByte)".
2002-02-20 23:46:55 +00:00
simonb
e4007a266b
Rename the SIBYTE entry to "Broadcom Corp. (SiByte)".
2002-02-20 23:45:50 +00:00
augustss
0db3eee7bb
Add quirks for Minolta Dimage X.
2002-02-20 22:28:54 +00:00
augustss
dd0cea6baa
Regen.
2002-02-20 22:28:20 +00:00
augustss
b1b2559c84
Add Minolta Dimage X (very nifty!).
2002-02-20 22:27:54 +00:00
christos
6728d906e9
Prefix structure members to protect them against clashes with eg. c++ keywords.
...
Suggested by Alfred Perlstein, from FreeBSD, ok'd by augustss
2002-02-20 20:30:12 +00:00
simonb
724e595530
Regen: Add the Concord Camera Eye Q 3x.
2002-02-19 14:13:01 +00:00
simonb
63e8b06dff
Add the Concord Camera Eye Q 3x.
...
Reverse the Yamaha and Yano entries so they're in alphabetical order.
2002-02-19 14:12:02 +00:00
simonb
72359ec83c
Fix indentation botch.
2002-02-19 14:07:26 +00:00
mjacob
d76634e057
Update 2300 firmware to latest release level.
2002-02-19 01:38:04 +00:00
augustss
30981eee37
Add ulinear8 to/from slinear16 transforms.
2002-02-18 19:50:03 +00:00
yamt
e3f53c00e2
fix indent
2002-02-18 14:45:56 +00:00
yamt
1486b3d395
add a missing splx in the case of error.
2002-02-18 14:41:50 +00:00
jmc
a10cd2d55f
Print the tcode in hex when debugging like all other debug statements
2002-02-18 09:10:44 +00:00
uwe
d2be07c591
Shared ebusvar.h for sparc and sparc64.
...
NB: ebus_attach_args member names are singular to be consistent with SBus.
sparc64 version uses plural, so update sparc64 drivers when converting them
to use this shared header
2002-02-18 04:44:41 +00:00
uwe
ea8decf111
Add DMA definitions.
...
Add some sparc32 related comments.
2002-02-18 03:43:29 +00:00
augustss
0786bd90ab
Add another tlp card (found by trial and error).
2002-02-17 21:21:58 +00:00
augustss
c8b7c9e3ba
Regen.
2002-02-17 21:21:15 +00:00
augustss
9c5176e112
Add a 10/100 Ethertnet card from Hawking.
2002-02-17 21:20:46 +00:00
bjh21
00994a7564
Add prototypes for static functions.
2002-02-17 20:08:34 +00:00
martin
387b55cc79
Protect calls to wi_cmd() from callout handlers by proper splnet()/splx()
...
pairs. Without this, the interrupt handler will steal the "command completed"
status and wi_cmd will busy loop until it times out.
Add some error output to make failure modes like this more prominent.
This should fix PR 14559.
2002-02-17 19:24:18 +00:00
thorpej
58ff6aaf22
Regen: Add Genesys Logic GL641USB CompactFlash card reader.
2002-02-16 18:18:06 +00:00
thorpej
bfdbf84cf8
Add product ID for the Gensys Logic GL641USB CompactFlash card reader.
2002-02-16 18:17:35 +00:00
thorpej
3285e44973
Regen: Add the Elan SC520 System Controller.
2002-02-16 16:36:36 +00:00
thorpej
1b6c81cacd
Add the AMD Elan SC520 System Controller.
2002-02-16 16:35:48 +00:00
augustss
77beb7e099
Use the correct years for copyright.
2002-02-14 21:58:30 +00:00
kent
46ffcfbf95
uaudio_set_params() for mulaw:
...
Give priority to 16bit again in the case the device has no hardware
support for mulaw.
2002-02-14 12:55:51 +00:00
augustss
4cb7d87b12
Oops, I messed up the last commit, try again.
2002-02-14 12:52:01 +00:00
chs
4ee45f845f
add support for Adaptec ANA-69xx multi-port cards.
2002-02-14 07:59:55 +00:00
chs
b744097a5f
allow writing to write-only mappings. fixes PR 3493.
2002-02-14 07:08:02 +00:00
augustss
076c2a2de8
Make fixed rate codecs work. From Tsuyoshi Iguchi in kern/15606.
2002-02-14 03:22:36 +00:00
itojun
75777b6533
make the driver even more silent; print state change messages only if IFF_DEBUG.
2002-02-13 22:06:17 +00:00
scw
08bde987bb
Separate out devices common to many Motorola mvme boards (68k, 88k and ppc)
...
in preparation for future mvmeppc and mvme88k ports.
This needs a bit if tidying up to make it trully shareable, which will
happen as the new mvme ports are added.
2002-02-12 20:38:43 +00:00
scw
8c75e475ba
Separate out devices common to many Motorola mvme boards (68k, 88k and ppc)
...
in preparation for future mvmeppc and mvme88k ports.
This needs a bit if tidying up to make it trully shareable, which will
happen as the new mvme ports are added.
2002-02-12 20:38:41 +00:00
scw
5bd17a1271
Separate out devices common to many Motorola mvme boards (68k, 88k and ppc)
...
in preparation for future mvmeppc and mvme88k ports.
This needs a bit if tidying up to make it trully shareable, which will
happen as the new mvme ports are added.
2002-02-12 20:38:09 +00:00
jdolecek
a2803fa798
split the channel stuff into record and play parts, so that this driver is
...
full duplex, independent
2002-02-12 19:52:43 +00:00
tron
f1a2d1c420
Remove obsolete prototype for "udsbr_search".
2002-02-12 10:51:49 +00:00
mjl
253423f1c7
Add OnSpec PC-Card reader
2002-02-11 21:13:35 +00:00
mjl
59ff2c4198
Regen
2002-02-11 21:07:50 +00:00
mjl
c381ca9def
Add Datafab MD1-II
2002-02-11 21:05:34 +00:00
uwe
6e320d03b8
Undo previous that incorrectly byte-swaps stamps for little endian
...
machines when RI_BSWAP is *not* set. Redo my original fix to directly
build stamps in desired endianness instead of calling bswap32().
2002-02-11 20:50:58 +00:00
kleink
db48366eb0
Forgot to mention two reserved bits.
2002-02-11 19:01:28 +00:00
kleink
4691174484
Move the declaration of pci_conf_hook down to <machine/pci_machdep.h>;
...
a port may choose to implement it not as a function but i.e. as a
pci_chipset_tag_t function vector.
2002-02-11 17:24:00 +00:00
augustss
490beda381
Remove an accidental change from last commit.
2002-02-11 15:20:23 +00:00
augustss
319f13f6ef
Give usbd_do_request_flags() an extra argument for the timeout.
2002-02-11 15:11:49 +00:00
augustss
5f87e5a984
Regen.
2002-02-11 15:00:35 +00:00
augustss
cf31e1b945
Add a bunch of mass storage devices.
2002-02-11 15:00:17 +00:00
augustss
e644076000
A little const poisoning. (From FreeBSD.)
2002-02-11 12:42:48 +00:00
augustss
a91e01c9ee
s/ab_csr/ab_addr/ so it compiles again.
2002-02-11 12:32:43 +00:00
augustss
6f566032d7
Whitespace changes.
2002-02-11 11:42:16 +00:00
augustss
0e66a32e2c
Switch to new abort mechanism.
2002-02-11 11:41:30 +00:00
augustss
f8204d29e1
Switch to the same abort mechanism as in [eo]hci; it should be more
...
robust.
2002-02-11 11:40:33 +00:00
wiz
9baadd8ee5
"doesn't" should have an 's'.
2002-02-11 11:19:26 +00:00
wiz
b231fd7631
explicitly, with two l.
2002-02-11 11:01:52 +00:00
wiz
66df0333a1
s/seperate/separate/
2002-02-11 10:44:38 +00:00
augustss
f1274a71dc
Some minor fixes from FreeBSD.
2002-02-11 10:09:14 +00:00
augustss
1b221b1c9b
Some updates for FreeBSD.
2002-02-11 10:04:28 +00:00
kent
c1b55b61ac
uaudio_chan_set_param:
...
Take care of param->factor.
uaudio_set_params:
Fix a problem of precision matching for mulaw/alaw with 16bit.
2002-02-11 07:10:36 +00:00
thorpej
3e9025cfbf
Remove a pretty much useless autoconfiguration message.
2002-02-10 23:28:27 +00:00
wiz
5c800297c6
Match ICS 1893.
2002-02-10 17:09:41 +00:00
wiz
c48956e61c
Regen [ICS 1893]
2002-02-10 17:09:08 +00:00
wiz
9f4c1b7c26
Add ICS 1893
2002-02-10 17:08:24 +00:00
wiz
6d119b5202
pcmcia -> pci in comment.
2002-02-10 12:26:23 +00:00
pooka
80b8890265
point sequioa.h to new location
2002-02-10 11:48:56 +00:00
kent
4653bffb03
uaudio_set_params:
...
Use slinear16_to_mulaw_le() if ULAW recording is requested and the device
supports neither signed 8bit nor unsigned 8bit and supports 16bit.
2002-02-10 06:37:45 +00:00
kent
29b73c4025
Add slinear16_to_mulaw_le().
2002-02-10 06:27:06 +00:00
thorpej
8edba68a05
Fix problems associated with the SiS 635/735 on-board Ethernet,
...
from Stephen Degler <sdegler@degler.net>, port-i386/15261.
2002-02-09 21:04:02 +00:00
sato
b2666184d8
delete '#if 0' codes.
2002-02-09 15:20:49 +00:00
tsutsui
0f5d20e20b
- rename struct iha_scsi_req_q -> struct iha_scb
...
- reorder some functions
- some more cosmetics
2002-02-09 15:13:00 +00:00
rh
c57778753f
regen
2002-02-09 09:21:24 +00:00
rh
7236711b7c
Add HP Scanjet 5400C
2002-02-09 09:20:44 +00:00
uch
5e1dc96b6e
| Module Name: syssrc
...
| Committed By: uwe
| Date: Thu Jan 31 11:18:08 UTC 2002
|
| Modified Files:
| syssrc/sys/dev/rasops: rasops8.c
|
| Log Message:
| Honor RI_BSWAP.
Endian fix.
2002-02-08 14:55:23 +00:00
briggs
269d70f6e7
Dup 53c1010-33 entry for 53c1010-66 (PCI_PRODUCT_SYMBIOS_1010_2).
2002-02-08 04:07:34 +00:00
augustss
660b4087dc
Add quirks for Minolta S304.
2002-02-07 13:53:14 +00:00
augustss
53a6c27b2e
Add quirk for devices without Get Max Lun.
2002-02-07 13:52:54 +00:00
augustss
86c1274c84
Regen.
2002-02-07 13:52:27 +00:00
augustss
c801ef4f0d
Add Minolta Dimage S304
2002-02-07 13:52:08 +00:00
augustss
d76f24be37
OnSpec doesn't like Mode Sense.
2002-02-07 13:02:26 +00:00
augustss
09f2c3182a
Regen.
2002-02-07 13:00:37 +00:00
augustss
29f28f51f0
Add OnSpec disk controller.
2002-02-07 13:00:13 +00:00
christos
7555da491d
Turn on mii on 3C980CTXM
2002-02-07 01:32:19 +00:00
pooka
8c1a2832b7
Remove inclusion of unused machine/cpufunc.h, it doesn't belong here anyways.
2002-02-06 14:50:42 +00:00
tsutsui
552bb9895a
TAB/space cosmetics
2002-02-06 12:43:05 +00:00
eeh
94a482c8a0
Fix a blatant inconsistency in PCI_PRODUCT handling.
2002-02-05 01:51:51 +00:00
junyoung
956ac1ab10
Regen.
2002-02-04 16:57:57 +00:00
junyoung
1c782b74b1
Add some more product ID's for ATI Mach64 graphics cards.
2002-02-04 16:56:49 +00:00
tsutsui
425a197cab
Remove chip description which is also mentioned in dev/ic/rtl81x9.c.
2002-02-04 16:33:15 +00:00
pooka
f323b44887
remove include of <machine/cpufunc.h>, it's not used here
...
fixes compile (at least) on arm32
2002-02-03 23:32:10 +00:00
pooka
d70864a866
make this compile:
...
include dev/ic/joyvar.h instead of the now non-existant arm32/isa/joyvar.h
2002-02-03 23:17:58 +00:00
augustss
7f01f1dd6b
Some white space fixes from FreeBSD.
2002-02-03 18:15:20 +00:00
jmc
edd781367c
Change some wording on fw's to make it more logical sounding.
2002-02-03 07:29:14 +00:00
jmc
c4bd465ed5
Add IEEE1394_MAX_REC macro
2002-02-03 07:25:11 +00:00
jmc
715f7380b0
Add an unreg function.
...
Add a uio struct to the abuf so direct uio supporting calls can be setup.
Change all refs of csr in the abuf to addr as thats it's real function.
2002-02-03 07:24:48 +00:00
darrenr
1ff5e232ba
add missing #include for SUN4 options
2002-02-03 05:53:28 +00:00
jdolecek
f32b3f4f89
Reduce the massive code duplication regarding joy(4). Split it into
...
MI and MD parts, and make ISA/ISAPNP/PCI joy(4) attachments MI.
2002-02-02 18:37:38 +00:00
jdolecek
34b1784adf
enable the joystick port on attach, too
2002-02-02 18:10:28 +00:00
tsutsui
8cfcd66841
Regen; add Initio INIC-850/1060 SCSI and variants.
2002-02-02 11:58:28 +00:00
tsutsui
2f9238db1b
Add Initio INIC-850/1060 SCSI and variants.
2002-02-02 11:56:43 +00:00
tsutsui
8c857ca266
Regen; add HiNT Corp. HB1 PCI-PCI bridge.
2002-02-02 11:30:04 +00:00
tsutsui
3800e16a5a
Add HiNT Corp. HB1 PCI-PCI bridge.
2002-02-02 11:28:46 +00:00
augustss
6462ad0b3c
Fix typo so that 48kHz can be set. From Stephen Ma in kern/15456.
2002-02-02 11:18:42 +00:00
augustss
e16f901581
Make auich support variable rate codec, and suspend/resume.
...
From URA Hiroshi in PR kern/15431 (partly from OpenBSD).
2002-02-02 11:13:44 +00:00
gehenna
5306945459
Add entry for ELECOM LD-USBL/TX
2002-02-02 06:04:46 +00:00
gehenna
604899daad
regen
2002-02-02 06:02:26 +00:00
gehenna
aa93973989
Add ELECOM LD-USBL/TX (ethernet adapter)
2002-02-02 06:00:56 +00:00
augustss
c0530aa288
Regen.
2002-02-02 02:29:49 +00:00
augustss
9df6e6d623
Add PhotoClip USB Camera (from FreeBSD).
2002-02-02 02:29:28 +00:00
is
a4cfa723ac
regenerate: fix typo in card name string.
2002-02-01 22:04:02 +00:00
martin
0b57fdbf9d
Don't display some (non-exceptional) events unless IFF_DEBUG is set.
...
I have a card that fires a continuos stream of "connected" events (one
every 30 seconds) while it hasn't found any peer.
2002-02-01 13:35:41 +00:00
is
48c749a49a
fix typo
2002-01-31 14:27:29 +00:00
uwe
13d8e231d8
Fix KBS_WARM comment.
2002-01-31 13:25:20 +00:00
uwe
0778a707e9
Honor RI_BSWAP.
2002-01-31 11:18:07 +00:00
haya
30f44eaa28
Add an entry for NEC 9801N_J12, which is an OEM of IBM infomover.
...
PR #14084 .
2002-01-31 08:45:14 +00:00
simonb
5d591d8020
White-space niggle.
2002-01-31 06:37:30 +00:00
ad
888b6f3f26
Bare-bones driver for AMI RAID. Parts taken from FreeBSD. This was tried a
...
good while ago and it had problems under load. Changes were made to address
that, but I don't have the ability to test them. So, I'm committing it
before it rots.
2002-01-30 14:35:43 +00:00
is
5fa8e00d02
Fix typo: ASIX, not AMBIX
2002-01-30 12:49:23 +00:00
is
8a6348be5f
Add Lantech Fastnet/TX (really generic ASIX AX88190) card
2002-01-30 11:20:23 +00:00
tron
abd441c487
Regen.
2002-01-30 01:53:00 +00:00
tron
e978c223ad
Fix vendor entry for "Rendition Inc.". This patch was supplied by
...
Paul Shupak in PR kern/15367.
2002-01-30 01:52:32 +00:00
bouyer
8b9a58198e
Support Ultra/100 on Intel 830M. From ks@ub.uni-mainz.de on -current-users.
2002-01-29 21:13:17 +00:00
junyoung
b265127f06
Regen.
2002-01-29 06:08:35 +00:00
junyoung
78d2285773
- s/INTERGRAPHICS/INTEGRAPHICS/
...
- Add two product IDs for Integraphics Systems graphics cards.
2002-01-29 06:07:16 +00:00
nisimura
5060825752
DANAS (disable autonegotiation) bit of BCR32 takes its effect when
...
set, not cleared.
2002-01-29 04:45:47 +00:00
simonb
c37d15083b
Fix a tyop in a comment.
2002-01-29 00:31:55 +00:00
thorpej
c5b600d0bc
Regen: Add product ID for the Intel i82544GC 64-bit variant.
2002-01-28 19:57:00 +00:00
thorpej
16fe240828
Add product ID for the Intel i82544GC 64-bit variant.
2002-01-28 19:55:15 +00:00
bouyer
6d7c6c755b
In hpt_pci_intr(): There is interrupt pending once IDEDMA_CTL_ACT is
...
turned off. It seems that IDEDMA_CTL_INTR is asserted before DMA transfer
is complete, leading to race condition in case of interrupt sharing.
Discovered reading the FreeBSD code.
2002-01-28 15:30:29 +00:00
aymeric
1a16f52c0a
sort a couple of entries by vendor number.
2002-01-28 09:25:33 +00:00
sommerfeld
c127a007e8
really fix it this time.
2002-01-28 03:47:14 +00:00
sommerfeld
3c99883ed4
Finish conversion to new-style isa config machinery (#ifdef DEBUG code was
...
left unconverted)
2002-01-28 03:45:25 +00:00
augustss
044c8f0a7a
Use M_WAITOK instead of M_NOWAIT when allocating extra descriptors.
...
Spotted by OpenBSD.
2002-01-27 23:00:34 +00:00
bouyer
3ba24c2b42
IF we change the ATA modes, also reset the device, so that we can retry
...
the command with the new mode.
2002-01-27 22:00:40 +00:00
jdolecek
1731882d0a
emuxki_set_params(): don't try to set parameters if the appropriate
...
'voice' is not initialized
This fixes kern/15394 by Onno van der Linden.
Code fragment to trigger the bug:
AUDIO_INITINFO(&info);
info.mode = AUMODE_PLAY;
info.play.channels = 2;
fd = open("/dev/audioctl0", O_RDWR);
(void)ioctl(fd, AUDIO_SETINFO, &info);
emuxki_voice_set_audioparms(): g/c check for voice == NULL, this is
never called with null voice
some minor style changes in emuxki_open()/emuxki_close()
2002-01-27 20:38:07 +00:00
augustss
9cdd3fd977
Don't dereference NULL pointer when no device attaches.
2002-01-27 18:10:34 +00:00
takemura
345bbe4615
Do nothing if there is no screen.
2002-01-27 11:08:30 +00:00
tron
6b3f95eac6
Regen.
2002-01-26 22:41:46 +00:00
tron
0f7d8365c0
Add missing names for devices supported by puc(4).
...
This patch was supplied by Paul Shupak in PR kern/15368.
2002-01-26 22:40:46 +00:00
ichiro
96f25772c6
OCHI -> OHCI
2002-01-26 16:34:27 +00:00
ichiro
a66a4379d2
regen
2002-01-26 16:31:18 +00:00
ichiro
ee79a9205a
OCHI -> OHCI
2002-01-26 16:30:00 +00:00
augustss
a7dea23b26
Regen.
2002-01-25 22:54:53 +00:00
augustss
6fd474bf85
Fix typo pointed out by Manuel Bouyer.
2002-01-25 22:54:34 +00:00
ad
49849b4d3a
- Always validate the return value read from the outbound FIFO.
...
- Copy access method info into the softc so we don't double dereference.
- Remove static on functions.
2002-01-25 16:10:35 +00:00
jmcneill
8a10d0653d
Make sure not to set the intellimouse mode more than once at boot, but still
...
reset the intellimouse mode on suspend/resume. Fixes problems with pmsi mice
locking the keyboard controller when X starts.
2002-01-25 14:53:43 +00:00
uwe
2536236e11
Add notag quirk for Seagate "ST11200N SUN1.05".
2002-01-23 18:13:08 +00:00
lukem
93e58d97ac
Add support for WSCONS screenblank ioctls. From Phil Budne in [kern/15213].
2002-01-23 17:11:38 +00:00
ichiro
ed09e8d901
It corrected forgetting to attach ","
2002-01-23 14:50:45 +00:00
pooka
7eb7ad4b7e
free memory allocated for suspend save area in detach
2002-01-23 11:27:59 +00:00
augustss
fd7f5e11ae
Don't pretend we can handle i830; it needs a somewhat different AGP driver.
...
(I added i830 to quickly.)
2002-01-22 17:29:36 +00:00
pk
6c51c2d3f4
Support for the ` Magma 2+1HS Sp' (from mouse on port-sparc):
...
- add sbus node name field to board info structure
2002-01-22 17:00:47 +00:00
pk
d29b3f6d0c
Support for the ` Magma 2+1HS Sp' (from mouse on port-sparc):
...
- allow for sbus node name matching
- get clock frequency from prom property.
2002-01-22 16:59:30 +00:00
junyoung
bb6d64e459
Regen.
2002-01-22 08:33:15 +00:00
junyoung
4d71cd5c7f
Rename RAGEXL to MACH64_GR.
2002-01-22 08:32:08 +00:00
ichiro
e00f8610ea
regen
2002-01-22 03:17:28 +00:00
ichiro
c1227aa54e
supported RATOC Systems REX-USB60
2002-01-22 03:13:28 +00:00
ichiro
9684a618c1
add product
...
RATOC Systems USB serial adapter REX-USB60
2002-01-22 03:12:18 +00:00
junyoung
7ef377f884
Regen. Add Mach64 GS.
2002-01-22 02:39:59 +00:00
junyoung
1e4a315dcc
Add ATI Mach64 GS.
2002-01-22 02:35:46 +00:00
ichiro
8d5e7bd872
if AP is nothing, FrameLen is 3 or less.
2002-01-21 21:55:05 +00:00
ichiro
a319f48222
regen
2002-01-21 21:45:46 +00:00
ichiro
c1b363222f
fixed some products name
2002-01-21 21:43:55 +00:00
eeh
e0747a992d
Regen.
2002-01-21 18:55:26 +00:00
eeh
e7a70bc9de
Add the device id for something that claims to be an ATI Rage XL.
2002-01-21 18:51:44 +00:00
thorpej
efc5b2fd84
Regen; Broadcom BCM570x-related IDs.
2002-01-21 17:20:05 +00:00
thorpej
2177c5565c
* Add Broadcom Corporation vendor ID.
...
* Add 3Com 3c996 product ID.
* Add Alteon "Tigon 3" (Broadcom BCM570x) product IDs.
* Add Broadcom Corporation BCM570x product IDs.
2002-01-21 17:19:23 +00:00
martin
f8974bfebe
Add support for ITK IX1 PnP cards.
...
Thanks to Nick Hudson for testing.
2002-01-21 12:31:42 +00:00
ichiro
65967c6704
Print Association status changes to the console.
2002-01-21 11:29:22 +00:00
ichiro
e08ec84292
"Association Faild" was added to "Link Stat" messages.
...
;
Implement wi_scan into wi.c.
forces if_wi to initiate one round of access point scan.
This code was written by jrb@cs.pdx.edu , modified and bug-fixed by ichiro@netbsd.org
2002-01-21 11:28:18 +00:00
augustss
12f71ce4b8
Regen.
2002-01-21 11:20:42 +00:00
augustss
8f9166873c
Add some new devices.
2002-01-21 11:20:25 +00:00
ichiro
93c743cc3b
mistake bit number of tx_rate
...
case 4 -> case 5
2002-01-20 07:26:14 +00:00
ichiro
19ae79a0b6
Upps
...
Garbage was removed.
2002-01-20 06:49:32 +00:00
ichiro
f62afb33a0
add few Information frame types
2002-01-20 06:45:22 +00:00
ichiro
c1a93623bd
When the length of the key of WEP was 5 or less octets, WEP was set to 40Bit.
...
5.5MBps were added to ifmedia.
2002-01-20 05:39:52 +00:00
ichiro
c9cdd04709
add scan req/result RIDs
2002-01-20 04:37:04 +00:00
oster
71a4ca8acd
Bah.. Not sure how those ";"'s got missed :-(
2002-01-19 22:20:48 +00:00
eeh
160abd5faf
Remove some obsolete code.
2002-01-19 03:16:38 +00:00
oster
9872e4c410
Let's not bother building a number of infrequently used RAID types.
...
The code is still there if people want it, but these other RAID
types (using various DECLUSTERING and SPARING techniques) arn't being
used in practise. Saves about 100K on i386 GENERIC kernels.
2002-01-19 02:50:54 +00:00
oster
e38e358cb2
Only include some debugging printf's if DEBUG is defined.
2002-01-19 01:51:51 +00:00
jdolecek
74c54977ea
drop completely superfluous PRINT() macro
2002-01-18 21:59:41 +00:00
ichiro
0c0bcf42a6
to use 104bit WEP key
2002-01-18 11:41:49 +00:00
joda
4a42472b23
add support for Ericsson PRISM2 card (kern/15130)
2002-01-17 09:56:43 +00:00
ichiro
da39bf6c59
some resources was released at the time of detach.
2002-01-16 03:27:37 +00:00
ichiro
f855f38bdd
add detach/activate routine
2002-01-16 02:11:20 +00:00
eeh
12fcdc813a
Fix illegal pointer manipulations that cause alignment problems.
2002-01-16 01:47:36 +00:00
thorpej
edd394b53e
Update for 88E1000 model number changes.
2002-01-15 21:01:59 +00:00
thorpej
60ed1aba47
Regen; add another Marvell 88E1000 PHY model number.
2002-01-15 21:00:50 +00:00
thorpej
dcc3d13f0d
Add another Marvell 88E1000 PHY model number.
2002-01-15 20:59:52 +00:00
thorpej
7f29645d87
Regen; add Intel i82544GC Gig-E.
2002-01-15 20:16:36 +00:00
thorpej
4f2478ee1d
Add the Intel i82544GC Gig-E.
2002-01-15 20:14:47 +00:00
mrg
2f90cc02e7
<dev/auconv.h> -> "auconv.h"; this makes auconv.c portable.
2002-01-15 16:39:50 +00:00
augustss
5fff88daf1
Note to self: set variable before using it.
2002-01-15 13:50:59 +00:00
jmcneill
273ca48725
Add power management hooks to pmsi driver and make sure that the
...
device is setup for the proper intellimode on resume.
2002-01-14 21:56:10 +00:00