c9dfdd20b6
Compile the kernel with -Werror and -fno-builtin.
1995-09-19 23:48:41 +00:00
7d7396c414
Make system calls conform to a standard prototype and bring those
...
prototypes into scope.
1995-09-19 22:53:47 +00:00
516ddf511f
Wrap only the message in ifdef DIAGNOSTIC.
1995-09-19 03:18:15 +00:00
909842fb1f
Correct jClkNoMem address for C650 from
...
nick@csua.berkeley.edu via Walter Ruetten.
1995-09-18 13:55:09 +00:00
e8dbcda856
Do not define MIN_PHYS here--it is m.d..
1995-09-18 13:52:43 +00:00
cb5010a4fe
Fix a spelling slight. Grab the faulting address if nofault in bus error.
1995-09-18 13:51:25 +00:00
927d165081
Optimize the via interrupt processing routines a tad. From
...
chas@ohm.nrl.navy.mil (Charles J. Williams).
1995-09-18 03:15:43 +00:00
cb4eb50b28
Change HwCfgFlags4 to something a bit more mnemonic.
1995-09-17 21:28:33 +00:00
1c8c505974
Fixes from Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>
...
to avoid panic()s when we read the PRAM values while ROM
vectors are missing.
1995-09-17 18:51:40 +00:00
b528dcf5c2
Fix from Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>
...
to prevent his last changes from causing a panic if some
values are not filled in in the ROM vector table.
1995-09-17 18:50:17 +00:00
c4250f7102
Add rom vector for LCIII from Peter Kohler (kohler@ife.ee.ethz.ch)
...
via Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>.
1995-09-17 05:22:57 +00:00
a106882a85
Only use PIO instead of PDMA if DRIVER_NOINT.
1995-09-16 18:22:33 +00:00
ccaff4431c
Simplify doboot().
1995-09-16 15:35:05 +00:00
ea4e385abd
Map in the VIA space for the bloody Mac II ROMs that directly reference
...
a hardware address. Also map in the ROM space before we call doboot().
1995-09-16 15:33:54 +00:00
6ed4261a1b
Fix segment table reference bug (from Michael Hitch).
1995-09-16 15:09:28 +00:00
a8b0260a05
Sync. with atari ncr5380.c -- mainly whitespace changes.
1995-09-16 15:06:55 +00:00
214a1bac9f
Fixes from walter@ghpc8.ihf.rwth-aachen.de (Walter Ruetten)
...
to use ROM routines to read and write PRAM times, etc..
1995-09-16 12:35:53 +00:00
bee931c117
Set timezone to 0. The booter's GMT bias should be used, instead.
1995-09-16 12:33:06 +00:00
2e06f3f2bb
More changes from walter@ghpc8.ihf.rwth-aachen.de (Walter Ruetten)
...
for correct handling of timezones and PRAM <-> system time conversion.
1995-09-16 12:31:13 +00:00
4dc81200f5
Rename scsi_main_irq() to pdma_ready().
...
Missed a few ATNs in last patch. (pointed out by Leo).
Raise timeout from 100 to 1000. From Leo.
1995-09-16 11:45:18 +00:00
048e948791
As Leo pointed out, my last change was not safe. This one should be.
...
I added two new bitfields to ncr_softc. They flag which devices have
been selected, and which ones have failed to go to message out when
selected with ATN. If a target fails to go to message out the first
time it is selected, it goes into the latter bitfield. If it fails
thereafter, we treat it as we did before.
1995-09-15 01:52:18 +00:00
a0d6a95720
indentify.
...
Bring in a few changes from Walter Ruetten (walter@ghpc8.ihf.rwth-aachen.de ).
Assume that PRAM time - GMT bias (set in the booter) is the current time
in UTC.
1995-09-14 23:44:12 +00:00
1b34b69c93
Gah... The Asante SCSI/ethernet box doesn't answer the ATN request
...
for a 'MESSAGE OUT' phase, so add support in scsi_select() for the
phase to be either 'MESSAGE OUT' or 'COMMAND'.
1995-09-14 02:54:05 +00:00
d8ab74fcf2
Honor new MACH_CLASSIIvx.
1995-09-14 02:49:11 +00:00
13c1f2d48b
Shuffle MACH_CLASSes around a tad and add IIvx as a seperate class because
...
it may have a different method for accessing the 'via2' functions.
1995-09-14 02:48:09 +00:00
9c61c22d66
Clean up message a tad.
1995-09-14 02:43:51 +00:00
18a11cecc7
Update a comment.
1995-09-12 22:52:08 +00:00
d8dc3d91c0
Update for Leo's changes.
1995-09-12 22:31:45 +00:00
1ae7af5b59
Updates from Leo's changes in the atari port.
1995-09-12 21:20:18 +00:00
639f90ef6e
Update from Leo's changes.
1995-09-12 21:05:58 +00:00
c91abc3e61
Remove infinite loop per Leo and Mycroft.
1995-09-05 11:21:34 +00:00
19a99aa395
Get softc as parameter in interrupt function, using new changes from
...
via.[ch]
1995-09-04 05:07:16 +00:00
129ca2cea9
Make VIA2 interrupts pass an argument in and let the scsi_register_*_intr
...
functions use that, too.
1995-09-04 05:05:58 +00:00
4f76655592
Fix a goof in the latest changes.
1995-09-04 05:05:11 +00:00
02883e7341
Remove an extra "talk" command--from Ken Nakata <kenn@remus.rutgers.edu>
1995-09-04 02:50:57 +00:00
86d6e121cd
Add support for Extended Apple Mouse Protocol from
...
Ken Nakata <kenn@remus.rutgers.edu>.
1995-09-03 20:59:53 +00:00
b394d7fc7d
Enable ADB interrupts unconditionally if not using setup_egret().
1995-09-03 20:47:21 +00:00
de4100b643
Clean up a bit.
1995-09-03 14:54:31 +00:00
761b3a8340
Clean up some.
1995-09-03 14:51:38 +00:00
30c554fc9d
Changes from Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>.
...
This forces the need for booter version 1.8.
1995-09-03 14:37:16 +00:00
745cb60f16
Note that this is now an obsolete driver.
1995-09-03 03:39:38 +00:00
e9a9533544
Make the new m.i. scsi driver the default.
1995-09-03 03:37:32 +00:00
166af00381
Make a local copy of the atari m.i. scsi driver sources for the time
...
being. Some people aren't supping arch/atari and this allows those
people to get the sources.
1995-09-03 03:36:35 +00:00
a7783604fd
Optimize this some. Still seems slower than it ought to be.
...
Register interrupt functions with via.c.
Clean up somewhat. Turn off DEBUG.
1995-09-02 19:29:42 +00:00
4ed102bbd4
Optimize accesses to VIA2 a bit.
...
Force SCSI driver to register interrupt functions and remove default
handlers.
Bring in a few changes from
Walter Ruetten <walter@ghpc8.ihf.rwth-aachen.de>--more to come later.
Define VIA interrupt functions as returning void, not long.
1995-09-02 19:27:34 +00:00
42d7c233d5
Very minor cleanup.
1995-09-02 05:44:07 +00:00
9f203a792f
Weren't quite ready for the last change.
1995-09-02 05:41:12 +00:00
e60752e507
Rearrange a bit.
1995-09-02 05:35:59 +00:00
bee422d998
DTRT. This should be considered the base version of the file.
1995-09-02 03:19:37 +00:00
29053c58b2
SA_ONSTACK --> SS_ONSTACK
1995-09-01 20:05:59 +00:00
b6fb219037
Process via2/rbv interrupts from low bit to high bit.
1995-09-01 04:10:11 +00:00
e46e8e7a57
A first pass at a scsi driver based on the Atari ncr5380{reg.h,.c} code.
1995-09-01 03:43:49 +00:00
d3930dd627
In child_return(), pass oticks of 0 to userret() instead of p->p_sticks to
...
avoid slighting the child of a timer tick if it gets one after starting.
Thanks go to cgd for noticing this.
1995-08-31 03:22:55 +00:00
503d3c4927
Add constants for CSI's communications card.
1995-08-25 21:20:57 +00:00
ac0af4229f
Change VIA2:vPCR setting to allow scsi IRQ and DRQ.
1995-08-25 02:56:41 +00:00
1ed5c0babc
Some code to support a vector passed in from booter 1.8.
1995-08-24 04:27:16 +00:00
0484bdaf59
Don't panic on NMI and only take notice if DDB.
1995-08-24 04:25:07 +00:00
66dcd8fd69
Add entries for the ccd.
1995-08-17 17:40:42 +00:00
68b61ea1ad
Fix comments. .space 0x1000 was accidentally left commented so it
...
still is--just explicitly, now.
1995-08-16 13:18:24 +00:00
37004a19e4
Missing cast and semicolon in last.
1995-08-16 05:17:31 +00:00
665a6a78bc
Load the old MacOS ROMBase value back in before we jump to reset.
1995-08-16 04:48:34 +00:00
ae51ffca30
Always fail when probed--until this driver works.
1995-08-14 03:55:28 +00:00
64ea04b1d0
Be more vocal about interrupts that we don't expect.
...
Include ncrscsi.h and ncr96scsi.h.
1995-08-14 03:16:07 +00:00
7d55e1196e
Document spl()s a bit, order the splfoo()s in splX() order.
1995-08-13 01:52:16 +00:00
7a9cad50cd
Replace splnet() with splsoftnet(). Add splnet(). Make splimp() > spltty().
1995-08-13 00:23:56 +00:00
80d7b0695a
minphys() functions really should return void.
1995-08-12 20:30:45 +00:00
52e968da1a
Fix oversight in last.
1995-08-12 18:48:47 +00:00
1fd03600dd
Get rid of cpu040 for good.
1995-08-12 04:08:29 +00:00
8f58d57321
Don't fake these values.
1995-08-11 17:48:19 +00:00
72d557cf87
The serial console works again (at least on the Q700).
1995-08-11 03:29:07 +00:00
d192d70a87
Note that we've been initialized.
1995-08-11 03:02:04 +00:00
100380f075
Do the serial console a bit better (still has problems).
1995-08-11 03:00:15 +00:00
81cc5998a1
Missing increment operator for if_opackets in last change.
1995-08-09 12:16:10 +00:00
b4eecb5362
We need to set cpu040 for just a while longer.
1995-08-09 03:25:25 +00:00
53af1e73b8
Make sure we don't remap video/serial before we're done writing to it.
1995-08-09 03:23:57 +00:00
71b21ba74e
Don't go bonkers if we don't have a real swap device.
1995-08-09 03:22:50 +00:00
dbdcebe34b
Fix a few 040-isms, remove an old comment, and add a few things for the future.
1995-08-09 03:21:59 +00:00
3b5979d56c
Remove cpu040 use from here. It should only be used at boot time.
...
Take out old method for determining load address for IIci/si.
Set all but IIsi/ci to use a clock initialization value of 115200 (not
the baud rate... ;-).
1995-08-06 04:39:56 +00:00
110cf98100
Get rid of int_video_{start,length} and wierd nubus mapping.
1995-08-04 03:21:46 +00:00
70065c2ed5
Nuke int_video_start in favor of consistent use of mac68k_vidlog.
...
Don't find the internal video more than once.
Probe for internal video before nubus instead of after.
1995-08-04 02:55:06 +00:00
fb5e0a34bb
Be consistent and use mac68k_vidlog instead of int_video_start.
1995-08-04 02:47:31 +00:00
b0a1bd6e17
Use panic() instead of printf();Debugger();
1995-08-02 11:53:02 +00:00
a76e2adfab
Get rid of reference to Debugger().
1995-08-02 11:50:43 +00:00
f60a2bbccf
Add kludge for LC video and change IIvx to assume 1MB of VRAM if we can't
...
figure out how much there really is.
1995-08-02 04:15:41 +00:00
fc8739097d
Fix signed/unsigned gaff in last.
...
Bring up-to-date with latest rash of changes to if_ed.c.
1995-07-30 21:39:17 +00:00
ff5fa674dd
Fix the internal video probe again.
1995-07-30 21:35:00 +00:00
80cd97e743
delay(7) instead of delay(20) seems sufficient
1995-07-30 21:30:57 +00:00
cf76e90671
Differentiate printf for illegal instruction/fpu traps in kernel mode.
1995-07-30 19:18:28 +00:00
139f62c079
Add support for Farallon from Brian Gaeke (brg@dgate.org).
1995-07-30 13:38:04 +00:00
cf0aca3cb4
Read the packet header count in bytes, not as a word--word reads return
...
invalid data on some cards (notably old Apple Ethernet NB and Farallon
cards at least).
1995-07-30 02:44:27 +00:00
a2f49ac930
Don't show up in "slot" 0xe.\n
1995-07-28 01:34:58 +00:00
58f294f29c
get rbv_nubus_intr working--at least on the IIsi.
1995-07-27 04:19:21 +00:00
ffe4785a58
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 07:33:32 +00:00
ff7dcdbfc5
Some debugging code added.
1995-07-23 21:54:47 +00:00
1c213ea5b6
Minor #def changes.
1995-07-23 21:51:47 +00:00
83d0f4f73d
Use get_mapping only if 030 and MMU enabled. Otherwise, fake it.
1995-07-19 16:39:03 +00:00
d9b318b2be
Add support for:
...
GENERIC
RB_ASKNAME
RB_MINIROOT
Also revved up the required version of the booter because we need the
booter fixes to get this functionality.
1995-07-18 04:10:13 +00:00
a5e4549306
Stop recursive jmp0panics.
1995-07-17 01:31:14 +00:00
8d0e9635a6
Get IIsi ethernet almost working. Still misses a number of interrupts.
1995-07-17 01:26:02 +00:00
c5fe9f62ff
Cleanup a bit.
1995-07-17 01:25:12 +00:00
c5724ea3a3
Some more bugs fixed and functionality corrected by:
...
"Paul R. Goyette" <paul@pgoyette.bdt.com>.
Implemeted the Set Scrolling Region, Set Tab Stop, and Clear All
Tab Stops functions.
1995-07-17 01:24:34 +00:00
a91a7f619b
GENERIC should have options GENERIC. Duh.
1995-07-17 01:21:29 +00:00
30c70a7c59
patch to handle cursor moves better. From Paul Goyette
...
(Paul@pgoyette.bdt.com )
1995-07-09 15:36:41 +00:00
fd69606246
Take out bogus message.
1995-07-08 12:39:12 +00:00
33cef0adfd
Clean up a lot. Run machdep.c through indent.
...
Remove a bunch of old debugging code and some dead code.
Put in some new comments. Need more.
1995-07-08 04:25:07 +00:00
3758e23b79
Add another routine for the grf display-specific drivers to return a physical
...
address.
1995-07-06 17:13:45 +00:00
e6992b3e60
Panic if we don't know how to relocate the video address.
1995-07-06 13:30:24 +00:00
84ee954356
Change NBSBASE to 0x90000000 and let it and NBSTOP be defined.
1995-07-06 13:25:30 +00:00
d1d1fbc094
Put in a cast to make compiler happy.
1995-07-06 04:17:15 +00:00
0ae9938e56
Fix (last?) bug in the IIvx kludge.
1995-07-06 03:44:46 +00:00
6503666839
If SYMTAB_SPACE is defined, set esym to be the same as end.
...
Fixup my IIvx kludge again.
1995-07-06 02:32:13 +00:00
f3274364d4
Fix a bug I introduced earlier.
1995-07-06 00:28:32 +00:00
e11c8dfd4c
Stupid programmer error in IIvx kludge.
1995-07-05 03:48:45 +00:00
38031d912a
First cut at a kludge for IIvx internal video.
1995-07-04 18:55:11 +00:00
6d08320888
Move SCSIBase from scsi.c.
1995-07-04 14:42:16 +00:00
2e4f1e0daa
Update a bit.
1995-07-04 14:38:49 +00:00
2510a4f689
A few nits.
1995-07-04 14:38:34 +00:00
1513342690
Add code to netintr to call pppintr
1995-07-04 12:14:32 +00:00
7263209ce6
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-04 07:15:28 +00:00
f92d7eb51f
Clean up some types.
1995-07-04 03:34:09 +00:00
4d6ed092f1
Fixup a comment.
1995-07-04 03:30:11 +00:00
1040af3492
Add missing interface for getting a grfmode structure from kernel.
1995-07-02 05:26:27 +00:00
ed434b457d
Fix grfmap() as well as grfmmap().
1995-07-02 00:49:52 +00:00
932a8fc9af
Set and use new fboff element from grfmode structure.
1995-07-02 00:30:25 +00:00
af7f31e30a
Add a couple elements to the grfmode structure.
1995-07-02 00:29:03 +00:00
3401cca400
Fix buglet that was missed when converting nubus to non pa==va mapping.
1995-07-01 23:40:38 +00:00
303845a487
Remove this define--we're using the new dump type.
1995-07-01 18:47:51 +00:00
eec2d38c71
Take out ncr96scsi0.
1995-07-01 16:35:54 +00:00
36654b75d9
Use flags for scsi interrupts. clean up a small bit.
1995-07-01 16:35:16 +00:00
175a1e27f4
add needs-flag for the scsi chip interfaces.
1995-07-01 16:28:13 +00:00
12ab0410c7
Clean up a tad.
1995-06-30 05:25:41 +00:00
fcde92bcba
Fix straytrap(). Update a few values in the ROM table.
1995-06-30 05:25:01 +00:00
5fced13f51
Ooops.
1995-06-30 05:23:03 +00:00
705e6bd12b
Fix oversight.
1995-06-30 05:21:33 +00:00
29bb03860c
Option key fix from Ken Nakata (kenn@remus.rutgers.edu).
1995-06-30 01:23:21 +00:00
2b71eae2c7
note that most of dev/ic's contents have changed names
1995-06-28 04:30:30 +00:00
829668e8d3
Some random cleanup and some cleanup of the dump routines, modelled on
...
i386. Untested. Remove old mac68k-specific stack trace code, etc. as
the cleanup.
1995-06-28 04:09:25 +00:00
2d49c3885b
clean up definitions of ctod(), dtoc(), ctob(), btoc(), btodb(), and
...
dbtob(). remove unused definitions of ctos(), stoc(), and dtob().
1995-06-26 06:55:38 +00:00
1c0be437b1
define __BDEVSW_DUMP_OLD_TYPE for ports where it's true. clean up
...
some m68k ports inclusion of common header.
1995-06-26 05:13:37 +00:00
600cdad805
Stupid typo in last.
1995-06-25 14:02:09 +00:00
50d8509da2
Stupid pasto in last.
1995-06-25 13:53:21 +00:00
0958ef72c8
Add libcompat.
1995-06-25 13:39:37 +00:00
2a153a49b1
Fix the clean target.
1995-06-25 13:06:32 +00:00
4d6069140b
Get the units right...
1995-06-25 04:49:05 +00:00
b1addb6674
Patches from Walter Ruetten (walter@ghpc8.ihf.rwth-aachen.de)
...
and Daniel Risacher (magnus@mit.edu ). Apparently with some
helpful discussion from John Wittkoski (jpw@insoft.com ).
This works on my IIcx and IIsi. Still needs a bit of cleaning up.
1995-06-25 03:24:09 +00:00
b1598cdd1b
Remove a compile warning.
1995-06-25 02:46:46 +00:00
fc6fb65d62
Do something a lot closer to the right thing for FPU_EMULATE/FPSP/040
...
and subsets thereof.
1995-06-25 02:45:14 +00:00
5781a8dcc0
The kernel is called netbsd, not vmunix.
1995-06-24 17:24:24 +00:00
4f05f7e8f6
pmap_page_index isn't a macro.
1995-06-24 16:18:50 +00:00
1dadb15deb
Remove DIAGNOSTIC
1995-06-22 23:24:18 +00:00
3ddc81510c
Add avail_end to keep ps and friends happy. Possibly a short-term fix.
1995-06-22 03:08:29 +00:00
1ccd38d9e1
Don't use constants for addresses. VA != PA...
1995-06-21 03:59:07 +00:00
229ed22747
Add function to reconfigure addresses when ROM is remapped.
1995-06-21 03:46:52 +00:00
2beeae8058
Lots of changes from hp300.
...
Removed MACHINE_NONCONTIG conditionals. Only support that
configuration, now.
Some cleanup.
1995-06-21 03:45:10 +00:00
49b9eb5e4d
A number of clean-up related changes and a few changes relating to
...
the new mapping. "real mem" is now correct for MACHINE_NONCONTIG
machines. MACHINE_NONCONTIG conditionals have been removed--only
support that case, now.
1995-06-21 03:41:51 +00:00
778adb81d1
Bring in 040 code from hp300 port.
...
Remove memory mapping code.
Update cpu_switch and a few other functions from hp300 port.
1995-06-21 03:36:27 +00:00
3d04799c79
Remove warning.
1995-06-21 03:20:58 +00:00
19b569364f
Cleanup some--needs more pruning.
1995-06-21 03:20:22 +00:00
37b6dc390f
Put page mapping code into a C module.
...
Remove old 040 version of page mapping--new way handles 040, too.
Derived from hp300 pmap_boostrap.c.
1995-06-21 03:19:35 +00:00
4a9e8ef39f
Raise MAXTSIZ, double DFLDSIZ and quadruple MAXDSIZ. Lower USRPTSIZE.
...
Remove unused mapin() macro. Update VM_MAX* macros to look like the
amiga's (easier to read than hp300's).
1995-06-21 03:17:06 +00:00
5dd8297b11
Cleanup some and make these look more like hp300 versions.
1995-06-21 03:14:06 +00:00
23622438bf
Get rid of pcb_cmap2.
1995-06-21 03:10:44 +00:00
c2184f6f5b
Update to look more like hp300. Clean up a lot.
1995-06-21 03:08:29 +00:00
04834fb800
Remove cpu_set_init_frame() define.
...
Remove BROKEN_SWAP
Change cpu_swapout() to null-op.
Remove profile_tick() define.
Add some 040 stuff and make other 040 stuff compat. with hp300 port.
Cleanup a bit.
1995-06-21 03:06:33 +00:00
7542473d6d
Clean up I/O base settings a bit.
1995-06-21 03:03:13 +00:00
697011742c
Add some debugging (conditional on DEBUG). Add a more correct probe for
...
internal video. Clean up nubusprint() a bit.
1995-06-21 02:59:08 +00:00
e4ff96e47c
Make NUBUS_BASE_TO_SLOT and reverse not depend on VA==PA for NuBus.
...
Add constant for DRSW_FARALLON.
1995-06-21 02:57:19 +00:00
6ff2537ad3
Make no assumptions about the absolute address of nubus cards.
1995-06-21 02:52:09 +00:00
cb00a78de3
Treat 0 as a failure case for ae_id_card() and take out
...
null-op check for a 0 addrlist in init.
1995-06-21 02:50:22 +00:00
f462aa095a
Be a bit more careful on the probe... Make sure that the current slot's
...
addresses contain the int_video_start--or assume that internal video is
is "slot" 0xE.
1995-06-21 02:48:00 +00:00
1eec6bfc33
Add pmap_bootstrap.c and take out mac68k_init.c.
1995-06-21 02:43:19 +00:00
55fbbc705d
Wrap with #ifndef _XXX_FLOAT_H_/#define _XXX_FLOAT_H_/ ... /#endif.
1995-06-20 20:45:22 +00:00
67bfc330f1
Fix a typo that's gone unnoticed for a long time. Noticed by Brian
...
Gaeke (brg@dgate.org ).
1995-06-20 05:13:19 +00:00
caa1421dd6
Add FPSP back.
1995-06-19 03:55:15 +00:00
6f06373e06
Take out M68040, add a more specific swap and add vnd.
1995-06-19 03:53:58 +00:00
fec7ba6562
Rearrange slightly.
1995-06-16 04:45:22 +00:00
d37674426a
"Always compile before you commit."
1995-06-09 02:19:47 +00:00
90caf013ba
In the interrupt routine, bail out if we've not been initialized, yet.
1995-06-08 12:52:02 +00:00
0b3271404c
Make genassym depend on its C source.
1995-05-31 00:09:55 +00:00
81712d5ba7
Make a diagnostic message DIAGNOSTIC.
1995-05-25 11:48:06 +00:00
0521ad83a0
Make comment fit reality.
1995-05-17 00:45:55 +00:00
2b47f281fe
Some cleanup.
1995-05-17 00:37:33 +00:00
94ce6105d2
Add configuration for my gateway machine.
1995-05-17 00:33:59 +00:00
a43ca9e742
Nuke cpu_exec and remove extra semicolon on cpu_swapout() panic string
...
(preparing for more changes in a bit...)
1995-05-17 00:30:16 +00:00
fd807928aa
Add a memcpy entry point as at least a temp fix for compiling with a
...
recent gcc2 snapshot.
1995-05-17 00:28:14 +00:00
6201783f37
Set A2 to PS_STRINGS in setregs().
1995-05-17 00:00:42 +00:00
725cb78165
Actually probe for 881 vs. 882. Also add a case for 040, although it's
...
really lip-service at the moment.
1995-05-10 03:19:00 +00:00
56b5c26854
Get rid of a printf() that got left behind in the probe.
1995-05-06 18:44:48 +00:00
c4cb3e244c
Probe this like the other devices.
1995-05-06 18:33:19 +00:00
331e2bd82b
Add some code/defines to differentiate Asante and Interlan/Gator cards
...
correctly with the new nubus code.
1995-05-05 05:40:13 +00:00
8703076975
define BROKEN_SWAP and/or cpu_swapout as appropriate.
1995-05-05 03:41:51 +00:00
34e5f975f9
Don't set mrg vectors if we're using the serial console--this allows
...
machines w/ non-working desktop bus to actually get on with booting.
1995-04-30 17:01:06 +00:00
59b4da2b39
Add new nubus handling that's much more robust.
...
Update via, if_ae, and grf accordingly.
Revamp grf.
1995-04-29 20:23:36 +00:00
0e59975fac
rename files files for new config/config.old naming
1995-04-28 08:19:12 +00:00
843a2a3539
Use new files.sunos
1995-04-27 12:08:54 +00:00
a2bc99d6f1
Make these compile again.
1995-04-23 00:37:23 +00:00
545f388282
Removed sunos_machdep.c
1995-04-22 23:40:24 +00:00
94289bf2b0
Move sunos_machdep.c to m68k
1995-04-22 23:39:02 +00:00
c5f01c2a4c
Fixed comparison in SYS__syscall to be against sysent instead of
...
p->p_emul->e_sysent [Thanks Charles for pointing this out].
I think that this code needs to be fixed anyway for emulations where
SYS_syscall is not the same number as the NetBSD one (0)... (Only the
alpha port so far?)
1995-04-22 20:49:06 +00:00
de42a28a1b
- added sunos_machdep.c for sun3, atari, amiga and mac68k.
...
- changed machdep.c and trap.c to use struct emul.
- remove ep_setup references.
- added struct emul to all emulations.
1995-04-22 20:24:40 +00:00
74b3f483db
Define DELAY.
1995-04-22 13:17:51 +00:00
a992a8136c
Add some multicast byteorder-related changes from djh@mulga.cs.mu.OZ.AU.
1995-04-22 12:08:12 +00:00
dda57ad059
Use vfs_shutdown().
1995-04-22 11:53:40 +00:00
9e1f939930
Get rid of old file from hp300 origins!?
1995-04-21 11:35:15 +00:00
5982b968a9
Enable nubus interrupts after registering.
1995-04-21 04:01:27 +00:00
7063b53b26
Separate nubus interrupt registry and enablement.
1995-04-21 04:00:55 +00:00
6bc53a2398
Handle grf_softc in the config.new manner.
...
Should have been done long ago.
1995-04-21 03:44:13 +00:00
13efb6c197
First pass of KNFication. Needs more.
1995-04-21 02:47:35 +00:00
85025d789c
Prototype iteopen correctly (oversight from a while back...).
1995-04-20 15:46:56 +00:00
a6ba5f8f7e
Update to use softc better and handle mainbus being indirect.
1995-04-20 15:32:01 +00:00
8288b9238d
Make mainbus an indirect device--needs more work, but it does function.
1995-04-20 15:31:23 +00:00
64bd3f0995
Move to ptytty
...
Nuke the grf's reset space holder.
1995-04-20 15:30:22 +00:00
df693904cd
include mi scsi files file.
...
Change several devices from needs-count to needs-flag.
1995-04-20 15:28:54 +00:00
4137a8ff57
Add itetty().
1995-04-20 15:27:43 +00:00
a7f44caf1b
Add a sertty() and update to use ser_softc instead of a bunch of arrays
...
everywhere.
1995-04-20 15:27:12 +00:00
1286501d43
Grab the sun3 cpu_coredump().
1995-04-20 15:25:41 +00:00
7345c91d2e
'twould help to unmount the filesystems, wouldn't it?
1995-04-19 14:01:58 +00:00
bf68945da5
Define struct ae_ring which is necessary because BYTE_ORDER == BIG_ENDIAN,
...
but the card is in x86 byte order mode because NuBUS does the swap "for us"
on 16- and 32-bit transfers. We should probably figure some way to use
the std struct ed_ring if/when all the 8390 drivers are all fully merged.
1995-04-19 04:46:06 +00:00
2b1a13ab2f
Initialize totlen in ae_put. Thanks to chopps for pointing it out!
...
Also, switch back from using struct ed_ring to using struct ae_ring
because BYTE_ORDER == BIG_ENDIAN, but the card is in x86 byte order
mode because NuBUS does the swap "for us" on 16- and 32-bit transfers.
We should probably figure some way to use the std ed_ring if/when
all the 8390 drivers are all fully merged.
1995-04-19 04:43:36 +00:00
4d37095e31
Fix typo: ieefp.h -> ieeefp.h.
1995-04-16 16:47:03 +00:00
38cb076019
Get this working. Mainly, don't always round to word transfers on
...
receive.
1995-04-16 00:14:54 +00:00
f93fa3c440
Update interrupts to use (void *client_data) instead of (int unit) as
...
parameter to interrupt function.
1995-04-13 04:04:58 +00:00
c9e2e6e2a8
Update to use dev/ic/dp8390.h. Mostly from mycroft.
...
Still get extra data on either transmit or recieve, but want to
checkpoint this work.
1995-04-13 03:58:18 +00:00
2bc91b9c2c
Almost working synch with if_ed.c. Much by mycroft. Fixups by me.
...
Inserts garbage characters--this driver isn't ready for use quite yet.
1995-04-12 15:01:14 +00:00
9554285cb6
Fixup from last changes.
...
Remove clock device.
1995-04-12 14:59:19 +00:00
13dc6a7a07
Make nubus indirect. Duh.
1995-04-12 14:57:40 +00:00
09ba51f21e
Fix typo from last changes.
1995-04-12 14:55:45 +00:00
df78dbb096
Reference cninit.c as well as cons.c
1995-04-11 09:52:11 +00:00
7114c30418
Use global 8530 defs.
1995-04-11 03:00:38 +00:00
e25c1817cf
kernel_pmap --> pmap_kernel()
1995-04-10 13:08:28 +00:00
a15027bd11
Remove old comment.
1995-04-10 13:01:19 +00:00
769e59cd1f
Remove bogus extra tape cdevsw entry.
...
Change adb dev init to a mouse dev init.
Remove non-existant clock device stuff.
1995-04-10 12:59:48 +00:00
22cefc03bc
Bring back pmap_kernel(), for now always inlined as a pointer to
...
kernel_pmap_store.
1995-04-10 12:41:29 +00:00
127e0761c9
Add mmopen(), mmclose(), and mmmmap() where appropriate. Lock vmmap when
...
needed. Make types consistent.
1995-04-10 11:54:47 +00:00
d751b03236
Minor consistency nits.
1995-04-10 10:01:40 +00:00
8f8bccf41f
Switch grfmap and grfmmap.
1995-04-10 07:56:46 +00:00
942c5ec591
Map vnd device from chr to blk.
1995-04-10 07:54:45 +00:00
d5cfa2c98f
Synchronize with latest changes to hp300 conf.c and give dummy mem
...
open/close/map routines (map is dummy for now, but should be implemented
when I'm more awake).
1995-04-10 05:57:40 +00:00
e957423a98
Move fp_except and fp_rnd definitions to machine/include.
1995-04-09 21:31:58 +00:00
c17558aa9b
Fixup types of a few functions to match if.h structure.
1995-04-08 20:55:26 +00:00
426b77c9eb
Put in a dummy PostEvent trap and enable ADB interrupts for IIci. From
...
Paul Goyette (paul@pgoyette.bdt.com ).
I went ahead and removed the conditional around setting the ADB interrupt
enable. I don't expect Apple will have changed this on any other models
as it's the same on all documented models.
1995-04-08 20:46:23 +00:00
7e4d7125a3
Back to previous version of the serial driver until we can figure out
...
why the new one gets a lot of overflows and doesn't work on the IIsi
or IIvx at all.
1995-04-08 13:20:52 +00:00
870235352d
Print a diagnostic if we do hit the watchdog and recover w/o resetting.
1995-04-08 13:17:55 +00:00
8ca9890ea2
Actually set the vectors for RBV as well as VIA2.
...
Don't go to spl4 when we have an ADB interrupt.
Turn off video interrupts on the SE/30.
1995-04-08 13:16:33 +00:00
10fc499f8c
Nuke FPCOPROC and add fpu device driver and FPU_EMULATE from sun3.
...
Still need to figure out how to handle this w/ FPSP on 68040's but
since we're not really using the 68040 yet...
1995-03-29 07:38:34 +00:00
7a557178ba
Get rid of some BARFs and assign some semi-reasonable spl()s...
1995-03-29 07:35:35 +00:00
9fca93fa60
Nuke FPCOPROC and add FPU_EMULATE to GENERIC.
...
Support the above with gwr's sun3 stuff.
1995-03-29 07:28:48 +00:00
4c88a6a961
Don't MRG_TEST the tracing if MRG_TRACE isn't defined. From
...
Paul Goyette (paul@pgoyette.bdt.com ).
1995-03-26 18:10:23 +00:00
625d11a739
sun3 fixes for COMPAT_SUNOS.
1995-03-26 15:53:36 +00:00
9d7efb1fb0
Do iteon() and iteoff(). Right now, they just clear/draw the cursor and
...
clear the screen. "We" should look at updating these further.
1995-03-26 15:52:21 +00:00
fa2133533d
invoke ktrsyscall with (vp, code, argsize, args) as args.
1995-03-26 08:03:29 +00:00
5a8670a41a
add_nubus_intr takes int (*)(), not void (*)().
...
Fix slot interrupts more.
1995-03-25 22:30:39 +00:00
bc14b5cbcc
Don't count video interrupts.
1995-03-25 22:28:30 +00:00
bb035dee62
KERNEL -> _KERNEL
1995-03-23 20:19:16 +00:00
d57fb977bb
Added -D_KERNEL to CFLAGS alongside each -DKERNEL.
1995-03-23 19:46:18 +00:00
50e913cf92
Handle VIA2 (RBV?) better. Speed up interrupt processing (which had a
...
negative impact on the ethernet timeouts). This is still not correct,
but I am unsure what is correct. We can, apparently, get a nubus
interrupt without any slots showing an interrupt condition. Ick. This
does not always happen before we apparently lose an interrupt, either
(see last (chronological) log message for if_ae.c).
Someone with a fresh set of eyes should probably look at this, but it's
cobbled together to (mostly) work.
1995-03-23 14:16:38 +00:00
24787aea0e
Add macvideo_intr to handle video interrupts. Currently has behavior
...
that was previously in slot_noint().
1995-03-23 13:45:07 +00:00
129893572f
Serious kludge around network timeouts. Network timeouts seem to be
...
caused by the VIA missing the ethernet slot interrupt. If we get a
watchdog, try calling the via's nubus interrupt function. If that
causes an interrupt, don't reset anything. If it doesn't, use old
behavior (log timeout and reset).
Yuck.
1995-03-23 13:00:05 +00:00
8b2f3e8f69
Modify handling of via2 interrupts. Ethernet is much more reliable
...
for me, now (one problem down, anyway).
1995-03-20 05:59:42 +00:00
b8403d582b
don't be so quick to cast macro arguments to unsigned; if the
...
arguments are really off_t's (e.g. to btodb), then you can lose
information. This was the "> 4G file systems don't work" bug; physio
uses btodb, which was broken.
1995-03-18 07:22:43 +00:00
a6f94aae0e
Let's do leave the RAW_PART alone...
1995-03-17 03:40:41 +00:00
5b07b9403e
Nuke NEWCONFIG. It's not used anymore at all.
1995-03-11 13:56:36 +00:00
999ff6a003
Use M68030 and M68040 instead of MC... Thanks to Luke Mewburn for
...
pointing out this inconsistency.
1995-03-11 13:55:03 +00:00
dc3d752c6c
Fix last arg to scdebug_ret().
1995-03-09 08:59:45 +00:00
db7371a9b7
Fix some types:
...
* code, args, and rval should use register_t.
* argsize should be a size_t.
Undo some of the differences between this syscall() and the hp300 version.
1995-03-09 07:57:42 +00:00
9940bbf358
Clean up via.c a good bit--still needs more. Get rid of some timing stuff
...
that we aren't using at all anymore.
1995-03-01 03:48:44 +00:00
50721bd46f
Raise watchdog timer a tad.
1995-03-01 03:47:08 +00:00
4c34be6b52
Clean up deleted files.
1995-03-01 00:00:00 +00:00
52c429f919
Clean up via.c a bit. Still needs lots of work.
1995-02-22 01:42:43 +00:00
ada7451e87
Fix copyright, add CVS version, and cleanup comments.
1995-02-16 00:02:12 +00:00
9f5abcb930
Add support from Erik Vogan for reading and writing PRAM. Don't enable
...
writing yet, though.
1995-02-15 23:55:51 +00:00
ede2edbeb6
Update to add pramasm.s.
1995-02-15 23:54:56 +00:00
347304eb41
Many changes and updates from Dave Leonard (d@fnarg.net.au) and
...
Brad Parker (brad@fcr.com ). I've been sitting on these for a while.
Notes from Dave:
redocumented z8530 stuff.
Added break ioctls and detection.
Pass framing/parity errors to line discipline.
Added TIOC[SG]FLAG.
Attempt at bringing all chip ops together.
deepended s/w fifos to match chip's.
1995-02-11 19:06:57 +00:00
cce0e858f9
Trim the interrupt counter space some and add _eintrnames and _eintrcnt
...
for vmstat.
1995-02-08 04:06:48 +00:00
ff26dc4f91
Add major for vnd.
1995-02-05 06:13:52 +00:00
58f54fd9c6
Clean up cdev for vnd.
1995-02-05 04:57:06 +00:00
7190ebb7e0
Set sc_link->openings.
...
Simplification of scsi_cmd from pc532 mods to this driver.
1995-02-01 13:50:42 +00:00
5f2f921a78
Yank current sendsig, sunos_sendsig, sigreturn, sunos_sigreturn from amiga.
...
Don't dump regs/mem on debugger switch.
Cleanup dumpmem() a bit.
1995-02-01 13:48:45 +00:00
591bb531bd
Fixup sc_debug parameters.
...
Simplify indexing into systab a hair (from Amiga).
1995-02-01 13:46:23 +00:00
559641938a
Pull Amiga implementation of pagemove(). Seems mo' better.
1995-02-01 13:44:31 +00:00
cbaa686772
Explicity return error value in findblkmajor().
1995-02-01 13:40:59 +00:00
3863b50c5c
Clean up deleted files.
1995-02-01 13:40:11 +00:00
28fbb7d0dd
Add a new config and remove some old ones.
1995-02-01 13:40:10 +00:00
c3d9bdcf9d
Align sigcode.
1995-02-01 04:49:37 +00:00
b56a5f27d4
add 'maxpartitions' keyword as first 'intesting' thing in the file, to
...
facilitate the solution of config.new's hardcoded partition number
problems.
1995-01-25 20:45:33 +00:00
2ef4ca1f3d
vn -> vnd renaming, for consistency
1995-01-25 04:48:07 +00:00
c7b2ca3cf3
Add a nullcnpollc() to our constab initializor so we don't get jump to
...
zero panics when attempting to enter the debugger.
1995-01-21 05:31:17 +00:00
0379ca918b
Fix major brain damage from a while back. Old damage broke jump to zero
...
panic, leading to mass confusion.
1995-01-21 05:21:24 +00:00
cf017d6caf
sunos_sysent.c -> sunos_init_sysent.c and add a few tabs for
...
readability.
1995-01-21 00:14:11 +00:00
e2eea24235
%s/sun_/sunos_/g and grab a few comments from amiga trap.c.
1995-01-21 00:12:56 +00:00
572ad11ab2
Fixup for COMPAT_SUNOS. sun_ -> sunos_ and much from amiga folks.
1995-01-21 00:11:57 +00:00
9540190d45
This file, which will be included by <sys/cdefs.h>, will contain macros
...
such as __warn_references() and __weak_reference() which are actually
machine dependant. This will make it easier for ports that are being
bootstraped with ELF and ECOFF based toolchains.
This change also introduces a new macro, _C_LABEL(x). _C_LABEL expands
its argument, an identifier, to a character string of the identifier
name as it is represented in an object file.
For most ports, _C_LABEL(x) will expand to "_x", for ELF based ports
_C_LABEL(x) will expand to "x".
1995-01-19 01:38:36 +00:00
73c9e168bf
Fix minor compile warning.
1995-01-15 06:29:04 +00:00
ee0ad992ea
scsibus_data -> scsibus_softc in device search.
1995-01-15 06:28:36 +00:00
bc36ccab9a
Update for scsi changes. Incl. xs->resid = 0 (thanks Phil).
...
Changes compile, but are not tested.
1995-01-15 06:27:54 +00:00
a267ba6dc0
Add tun device at cdevsw[24], one up from hp300 location, but we already
...
have adb at 23.
1994-12-22 05:50:26 +00:00
e5049f4d59
make the definition of _JBLEN mach. dep. header-dependent.
1994-12-20 10:36:27 +00:00
d42a8b725e
Remove extra arg to d_open.
1994-12-14 19:10:08 +00:00
749ca327c9
Nuke Log in if_aereg.h and remove duplicate (and benign) sc->smem_size
...
assignment from Brad Parker (brad@fcr.com ).
1994-12-04 19:40:14 +00:00
1c47e24828
Mac ROM Glue changes from grantham@tenon.com.
1994-12-03 23:33:55 +00:00
thorpej