- Don't make a reference of curproc when it has NULL value. It causes
double fault upon a fatal panic ocation.
- Macro FETCH_INSTRUCTION() took a value of address 0.
-
UVM relies on pmap modules keeping track of modified/referenced bits
after a page has been removed from all mappings. So *dont* clear
PV_REFERENCED or PV_MODIFIED flags in pmap_remove().
either OP_JR function code or *OP_JALR* function code (not OP_JAL opcode).
insn_unconditional_flow_transfer() was to read an unintialized variable.
Those MD DDB routines seems not useful work so far.
- returned EOPNOTSUPP rather than -1.
- no check for negative offset.
many of these fix potential security problems in these drivers.
XXX XXX XXX
the d_mmap cdev routine should be changed to have a prototype like:
paddr_t (*d_mmap) __P((dev_t, off_t, int));
by someone!
Track page modification status in the PV entry like the alpha, and let
pmap_is_modified() return current status back to the VM system. UVM now
works reliably.
Garbage collect the old pmap_attribute[] stuff.
- cpu_set_kpc() now takes void *arg third argument, passed to the
entry point.
- cpu_fork() allows parent to be non-curproc iff parent is proc0.
When forking non-curproc, assume its state has already been saved.
- Adjust various pieces of machine-dependent code to account of all of this.
* commit isapnpvar.h changes required for ARC to support plain isa.
* fixup mistake over mips/include/cpuregs.h.
* mips/mips_machdep.c:
set L2 cache-size for arc, cleanup use of L2cache present
vs L2 cache-size variables. check for no L2 cache on kernels
configured to require one. misc cleanups.
* mips/mpis/trap.c: more locore stack-traceback label cleanup.
XXX Locore callbacks for mips3, mips4, r4600 cacheflush need more work.
Adds (most) support for ARC platform to port-independent mips code.
Some changes (e.g., clean up of overlapping CPU/FPU ids) inspired by
comparison to the OpenBSD 2.1 codebase of Soda's ARC port.
Open issues:
* Still no support for r4600 or mipsIV CPUs with two-way L1 cache.
Code derived from Per Fogelstrom's OpenBSD source doesn't work
on mips3 pmaxes with L2 cache.
* Still some port-specific #ifdefs, for interrupt enable and
pmax L2 cache-size. Needs more thought, but overlaps with
work-in-progress by Tohru and Tsubai on spl()s and related stuff.
u-area in machine-dependent code. Instead, call exit2() to schedule
the reaper to free them for us, once it is safe to do so (i.e. we are
no longer running on the dead proc's vmspace and stack).
- bump cpu_model[] length as the longest name occupies over 30 characters.
- place machine_arch[] beside machine[] for clearity.
- nuke useless #include directives.
- small scale cleanup in vm_machdep.c
address on 2 architectures anyhow. Also, move the definition of the `label_t'
type inside _KERNEL protection, since it is specific to the in-kernel
setjmp()/longjmp() implementations.
as with user-land programs, include files are installed by each directory
in the tree that has includes to install. (This allows more flexibility
as to what gets installed, makes 'partial installs' easier, and gives us
more options as to which machines' includes get installed at any given
time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_
still supported, though at least one bug in the 'symlinks' case is
fixed by this change. Include files can't be build before installation,
so directories that have includes as targets (e.g. dev/pci) have to move
those targets into a different Makefile.
there is one. The Mach VM system seems to take care of this, so it
hasn't knowingly caused a problem. UVM does change mappings without
removing the current mapping, and will pmap_page_protect() hangs
if pmap_enter() doesn't remove the previous mapping.
prototype declearation for method to override wbflush() callback
vector with model-specific code. Used on DEC r2000a machines with
writebuffers which indicate writebuffer drain via cp0 usability bit.
read and write compare register (controls cycle-driven periodic interrupt).
Use cycle counter for microsecond time on mips3, but for now only on
3min motherboards (5000/150). the MAXINE baseboard microsecond
counter is more stable and I don't ave no 5000/260 to test.
XXX clkread() is a mess, it should be rewritten.
XXX should add nanotime() to give inkernel nanosecond resolution,
and then microtime() reworked to use nanotime().
interrupt-callout vector from mips locore dispatch code to port code.
* Move branch-emulation declaration to mips/include/trap.h.
* Garbage-collect pmax/pmax/trap.h.
Not needed now pmax/pmax_trap.c is gone, and after above tidy-up.
common place:
- allocsys(), which computes space for and assigns addresses
to kernel data structures at boot time.
- mips_init_msgbuf(), which initializes the error message
buffer at the end of core.
- mips_init_proc0(), which initializes the U-area for proc0
and nullproc.
didn't make it in. Aproved by Jonathan and tested here at Stanford.
While I'm here, add conditional prototypes for clnlintr() and nsintr()
so that NS and ISO will compile correctly.
to the TLB dump routines arguements. Machines would die horibbly when
trying to dump the TLB entries in DDB. Also don't explicitly "page" the
output, since db_printf takes care of that.
if the break instruction is still there. This works around a problem with
the software single step in DDB not recognizing the temporary breakpoint
set to emulate the single step.
- fix _C_LABEL so that it actually works.
- make __RENAME use _C_LABEL.
- fix __RENAME so that it expects an unquoted argument.
- fix __indr_reference and __warn_references so that they
supply their own final semicolon.
- define __warn_references to nothing if not GNU C (required
by the way it's used).
The __warn_references semicolon change has to be made
so that __warn_references can be defined into nothing.
(A ; all by itself isn't a great idea.) The __indr_reference
change was made for consistency.
From /sys/news3400/news3400/locore.s, with id
@(#)locore.s 8.3 (Berkeley) 9/23/93
Kazumasa Utashiro notes that the pmax cacheflush routines don't work:
#ifndef NOTDEF /* I don't know why Ralph's code doesn't work. KU:XXX */
It's because pmax hardware wries the COP0 bit to external branch
logic. news3400s don't, and so the bc0f loop fails. It will also
fail on some other models of pmax, but we dont' support them.
Surround the relevant framgents in locore_r200.S with "#ifdef pmax".
Longer-term, the cacheflush entry in the locore callback may have
to be a CPU baseboard-specific entry, not just CPU-version specific.
(_BYTE_ORDER, _BIG_ENDIAN, _LITTLE_ENDIAN).
Define old names from the ANSI ones if not _POSIX_SOURCE.
* Define _QUAD_HIGHWORD and _QUAD_LOWWORD properly when
_BYTE_ORDER == _BIG_ENDIAN.
Only assembly version for i386 bswap16 and bswap32 for now (bswap64 uses
bswap32). Contribution of assembly versions of these are welcome.
Add byte-swapping of ext2fs metadata for big-endian systems.
Tested on i386 and sparc.
msgbuf. Note that old 'dmesg' and 'syslogd' binaries will continue running,
though old 'dmesg' binaries will output a few bytes of junk at the start of
the buffer, and will miss a few bytes at the end of the buffer.
