Add menu for all disklabel partition types.
Default 'partition type' and 'sizechoice' menus to current value.
Change 'standard/use existing' to 'set sizes/use existing'.
alter des.h to be friendly with openssl/des.h (you can include both in the
same file)
make libkrb to depend on libdes. bump major.
massage various portioin of heimdal to be friendly with openssl 0.9.7b.
Remove one or two fixed length strings (use malloc etc instead).
Change a lot of 'if (strlen(x) == 0)' to 'if (x[0] === 0)'.
Let user skip network config if any non-loopback interfaces are UP.
Always free() buffer allocated by collect(), could be a massive leak.
Whitespace changes.
Replace defined(UNPRIVED) tests with ${MKUNPRIVED} != "no"
Add MKUPDATE; if not no has the same semantics as if UPDATE was defined.
Replace defined(UPDATE) tests with ${MKUPDATE} != "no"
Improve documentation for these and other make flags.
whenever a command was run. Maybe a screen redraw is required if the
command is able to corrupt the screen - but the refresh was happening
much too early to fix that, and it would be better to collect/discard
the commands output anyway.
When asking for bios geometry, ask for sectors per track and heads
then calculate cylinders from volume size.
Write MBR_MAGIC into correct place when writing extened partitions.
Make disk_desc[], disk and numdisks local to get_disks (instead of globals).
Fix a little fallout from the above.
A bit of mbr.c was missing #ifdef BOOTSEL...
Remove the abberant call to endwin() in i386 md_update() that caused
echo to be left on. I've not removed the endwin from the other ports.
Only run MAKEDEV if etc.tgz installed.
Some extra sanity checks on an 'rm -rf %s'.
program/tool from "FOO" to "TOOL_FOO". The new variables are:
TOOL_ASN1_COMPILE TOOL_CAP_MKDB TOOL_CAT TOOL_CKSUM TOOL_COMPILE_ET
TOOL_CONFIG TOOL_CRUNCHGEN TOOL_CTAGS TOOL_DB TOOL_EQN TOOL_FGEN
TOOL_GENCAT TOOL_GROFF TOOL_HEXDUMP TOOL_INDXBIB TOOL_INSTALLBOOT
TOOL_INSTALL_INFO TOOL_M4 TOOL_MAKEFS TOOL_MAKEINFO TOOL_MAKEWHATIS
TOOL_MDSETIMAGE TOOL_MENUC TOOL_MKCSMAPPER TOOL_MKESDB
TOOL_MKLOCALE TOOL_MKMAGIC TOOL_MKTEMP TOOL_MSGC TOOL_MTREE
TOOL_PAX TOOL_PIC TOOL_PREPMKBOOTIMAGE TOOL_PWD_MKDB TOOL_REFER
TOOL_ROFF_ASCII TOOL_ROFF_DVI TOOL_ROFF_HTML TOOL_ROFF_PS
TOOL_ROFF_RAW TOOL_RPCGEN TOOL_SOELIM TOOL_SUNLABEL TOOL_TBL
TOOL_UUDECODE TOOL_VGRIND TOOL_ZIC
For each, provide default in <bsd.sys.mk> of the form:
TOOL_FOO?= foo
and for the ${USETOOLS}=="yes" case in <bsd.own.mk>, provide override:
TOOL_FOO= ${TOOLDIR}/bin/${_TOOL_PREFIX}foo
Document all of these in bsd.README.
This cleans up a chunk of potential (and actual) namespace collision
within our build infrastructure, as well as improves consistency in
the share/mk documentation and provision of appropriate defaults for
each of these variables.
This should stop the i386 code splatting all over the start of the disk
during upgrade.
Upgrade will still use partition 'a' (unless you loop through the install
far enough first!)
Actually this needs changing to use /usr/sbin/etcupdate (or similar),
but the script needs fixing first.
Might be better for sysinst to have its own copy, gets to be fun to run
because you have to pull the commands from the target FS.
- separate shared part and context part from iconv_t.
- add cache of shared part.
and, bump shlib_version minor of i18n modules because iconv i/f is changed.
Fix typo: osreleasese -> osreleases.
Write @pkgdep directives, drawing package dependencies from
distrib/sets/deps.
When regpkg is finished, now it removes the packing list temporary
file from /tmp.
Optimizations: do not re-invoke make(1) unnecessarily, it takes a
full second to bootstrap it on my on my anemic PC. Also, use
xargs/find instead of awk/system()/shell to classify each package
path as a file or directory.
For consistency, adopt similar variables names as makeflist uses.
Use the set-list routines in sets.subr instead of duplicating code.
a new list:
sets.subr -- The set-listing code that is common to makeplist,
makeflist, and regpkg has moved here.
syspkgdeps -- Compute naive dependencies for system packages based
on directory containment. I.e., if package A contains
path /p/q, and package B contains path /p, then B is
considered a dependency of A. As Jim Wise remarks,
this is not quite right: system-package dependencies
should indicate a functional dependency. Nevertheless,
these naive dependencies protect us from orphaning
files when pkg_delete'ing system packages.
culldeps -- Helper for syspkgdeps. Removes redundant dependencies
from a dependencies table. Essentially does the opposite
of a transitive closure on a dependencies table: if
the table contains A depends-on B, B depends-on C, and
A depends-on C, then A depends-on C is removed because
it can be derived from the prior two dependencies.
deps -- Dependencies computed by syspkgdeps.
category (since they're listed in the misc/mi set list), rather than
a system package under base.
Add a comment and a description for the new system package.
+ use "uname -r" if osrelease.sh isn't available
+ if SYSPKG_DATES is set in the environment, use the date for the
version. For some reason, this is controversial, so the default is
to use NetBSD kernel versions. Re-instate the code to calculate the
date, but only use it if the date cannot be gleaned from the RCS Ids
of the constituent parts.
+ re-work the versions file, since it was committed in an incomplete
state - there were version numbers without package names in there.
Instead, get the version number by exception - i.e. assume it's "0"
unless specified in the versions file. This means less independent
maintenance when a kernel version number is bumped, and less
duplication of work (since any new system packages will now have the
correct version number by default)
+ lose the section which duplicated the calculation of "tiny version"
which was never used (and which didn't work correctly)
Use swapctl() for all swap operations.
Remove md_upgrade_mbrtype() from arc and hpcmips ports.
(I haven't finalised what I'm doing about type 165 partitions, but the
existing code is borked.)
Remove pointless 'len' parameter from read_mbr and write_mbr.
Make read_mbr initialise mbr if it can't be read (delete MD code).
Make i386 always ask at least once about the bootcode.
Move LIB_MOVE and LIB_COUNT from md.h to aout2elf.c
Make same function return useful defaults if it can't find an answer.
Make all ports default to the useful defaults if bios geometry is unknown.
Move some messages to mbr set from mi set.
Fix i386 code that selects which bios disk, simplify interface to menus.
Remove now unnecessary global data from many ports.
4 times system memory). (These numbers need moving to a different menu still.)
Remove size of /usr from default sized / when /usr created.
Shrink swap in order to get partitions into available disk space.
Add twice ram size to / if space available (for system dumps).
Keep all but last partition cylinder aligned when the disk isn't a whole
number of cylinders.
to explicitly version syspkgs. See discussion on source-changes@netbsd.org.
If we want to lose this functionality, we should discuss this on the appropriate
lists...
file entries from the syspkg hierarchy, brought up to date to include some
that had been missed out.
Add the descrs file, which is a single file containing all the DESCR
file entries from the syspkg hierarchy, brought up to date to include some
that had been missed out.
Thanks to Jim Wise for all the work that went into the syspkg sets.
Add the attrs file, which is a single file to which can be added
attributes (like preserve).
Add a regpkg script, which allows a single system package to be
registered, based simply on its setname and syspkg name. All the
information is gleaned from the lists files by means of scripts, no
source tree is needed. The version number for the system package is
calculated automatically, based on the most recent mtime of the files
that constitute a system package.
Add a regpkgset script, to register all the system packages in a set.
The set names recognised are "all", "base", "comp", "etc", "games",
"man", "misc", "text".
and also bring up to date the ELF vs a.out knowledge.
Also, sort the directories into reverse alphabetical order, and add them to
the generated PLIST file after any file entries.
Grab the comments into a single file from the individual syspkg set entries.
Grab the descriptions into a single file from the individual syspkg set entries.
Add an attributes file to which can be added attributes for system packages.
The "preserve" attribute has been implemented.
Add extra comments and descriptions for system packages which were missing.
Hack to give free space to a default sized /usr
Add extra space to / and /usr is any of the X sets are included.
Remove last reference to 'layoutkind == 3'.
I've also made the set selection happen first. This lets me test it!
also measn the selected sets could be used in the disk partition code.
Removed the 'with X' disk layout question (now too late to change the sets).
Fix menu size so that user defined partitions can be allocated instead of
standard ones (need > MAXPARTITIONS entries in menu).
Make partition size info static - with a view to including it in a longer loop.
Update lists for ramdisks to include the required files.
NB /usr/sbin/installboot is not used by sysinst and is only in ramdisk-big.
Increase the sizes of the ramdisks, there is plenty of space in all the
boot floppies except rescue-tiny (2k) and boot-tiny (32k).
PowerBase is actually Open Firmware 2.0.x
add iBook (16VRAM) and iBook (Summer2002) as supported models
mention next release of NetBSD will support multiple CPUs
mention that some L3 caches on CPU upgrades may not be enabled by default
PowerMacintosh G4 (FW 800) model is reported to work with 1.6.1
macppc uses gem driver instead of gm ethernet driver now
macppc uses tlp driver instead of de ethernet driver now
AirPort Extreme is unsupported
full wscons capabilities not supported (virtual terminals and color)
keyboard problems with iMac and B&W G3 seem to have been cleared up
fix links to newly updated Partitioning HOW-TO and mention use of pdisk
can't view files on official ISO image or floppy from Open Firmware
keyboard problems with iMac and B&W G3 seem to have been cleared up
fix links to newly updated Partitioning HOW-TO
OF 3 firmware update 4.1.7, mention that it's not much of a problem anymore
point to ZTerm home page
redo partitioning section
update now that there's a pair of boot floppies
change MS-DOS floppy section to be Zip disk
This does change the default size of /, but I'm going to rewrite
make_bsd_partitions next to make it less user-hostile.
(I'm not sure adding in 2 * ram is actually useful! Especially size it left
/usr with a -ve size on all my test installs with 256MB ram and 1GB disk)
Make bootsel code delete menu names if the partition is unused.
Use raw device for cdrom access (I've a kernel that doesn't report an invalid
label so /dev/cd0a dosn't work).
- make_bsd_partitions() correctly handles PART_BOOT
- use bsddisklabel.c for pc532 and sgimips (this does change the default size
for the root partition, as it no longer includes twice the memory size).
- Change way ports define disk_names[] (in particular this lets me add "vnd"
for testing), also ensures all ports pick up new drivers.
I've make most ports use the default "wd", "sd", "ld".
Abort the search for disk units if we get ENOENT (ie no /dev entry) to
speed up the case where we are looking for a disk type that isn't
supprted by the port.
(it is possible we could just check all possible disks on all ports...)
left consistently.
Make the i386 install let you partition a disk beyond the CHS limit if the
system bios doesn't support LBA reads (the checks aren't ideal yet).
Make the bsddislabel.c code usable onan i386 system - but don't use it yet.
Use strlcpy() instead of strncpy() where appropriate.
Recode timezone menu so that it can stand opt_name being const char *
and to only do the fts_read() once (there were problems if the filestore
changed between passes!).
Remove stupid check for errno != 0 which probably stopped the tomezone
menu being displayed!
Change name of target build from xxx.mk from 'all' to xxx.crunched to avoid
picking up baggage from bsd.own.mk and bsd.prog.mk.
Fixes toolchain/21563 (with new crunchgen binary)
those ports which are using the now-modified MI mbr.c file which
was recently modified to use those messages. French translation
courtesy of Manuel Bouyer, Polish copied from the i386 port.
dsl