d62187c043
new RCS ID format.
1994-10-26 08:01:33 +00:00
260ddbefb7
Rearrange ed_init() slightly, to better correspond to the National manual.
...
Optimize ed_rint() slightly in the case of multiple packets. (Avoid an outb
and an inb for each packet).
1994-10-23 23:24:56 +00:00
603fe7b5a6
Slight optimization.
1994-10-23 21:38:00 +00:00
0114159848
Fix the packet length correction for buggy chips so that it actually works,
...
and always use it (otherwise short packets could still be corrupted). Also
produce a diagnostic message if DIAGNOSTIC, since it *is* a hardware bug.
Add an ED_PAGE_SHIFT constant, and use it, to avoid GCC doing horrendous
things with divides and multiplies.
1994-10-23 21:22:13 +00:00
28cbceeec7
Make this more likely to work.
1994-10-23 19:24:01 +00:00
e5d974c51f
First cut at making user-level SCSI commands work. This is untested.
...
Partly from John Brezak.
1994-10-20 20:31:23 +00:00
3e30a415ae
Be careful not to stack multiple timeouts.
1994-10-20 19:22:01 +00:00
4d072c5435
Remove the local timeout mechanism, and just use explicit timeout()/untimeout()
...
calls.
1994-10-20 18:37:45 +00:00
c11a06cbc2
Always set d_secsize to 512 for now.
1994-10-20 17:03:09 +00:00
b8ab5f65d1
Back out change to print geometry from label at boot; can't do this reliably.
1994-10-20 16:54:44 +00:00
0862d07daf
Don't switch to single-sector mode just because we got a corrected error.
1994-10-20 16:36:21 +00:00
d4153fff4d
Rearrange wdcstart() in a more logical fashion, and eliminate many redundant
...
calculations. Also, speed up bad block searching a little.
1994-10-20 16:19:08 +00:00
7d391c250d
Fix minor omission.
1994-10-20 14:10:18 +00:00
cd66683989
openpart -> openmask
1994-10-20 14:08:07 +00:00
bb12b9c8a2
Trivial stylistic changes.
1994-10-20 14:05:08 +00:00
caaeda044b
Similar changes to sd.c.
1994-10-20 14:03:38 +00:00
b1568d887e
Use the block size in the label in most cases.
1994-10-20 13:50:38 +00:00
cae71ba91d
Various changes:
...
* Add a dkdevice; move sc_*openpart, sc_label, and sc_cpulabel into it.
* Turn sc_wlabel into a flag, and don't set it automatically in DIOCWLABEL.
* If there is no label, disallow all I/O except to the raw partition.
* Don't allow I/O to `unused' partitions.
* Beginnings of support for block sizes other than 512 bytes.
Other minor changes.
1994-10-20 13:44:46 +00:00
d5b3572f5c
Various changes:
...
* Get rid of unused `partflags'.
* Use dk_openpart, and remove `openparts'. Also, allow an open on both
the block and characters devices at the same time.
* If there was a label, print the geometry from the label at boot time.
* Turn `wlabel' into a flag, and *don't* set it automatically in
DIOCWLABEL; disklabel(8) does that.
Other minor changes.
1994-10-20 13:33:36 +00:00
8ae8b4ab29
Bug fixes from Rafal Boni:
...
* Set promiscuous mode flag before configuring card, so it actually works.
* Handle failed TDR commands correctly.
* Remove some apparently defunct and bogus code.
(This driver needs more work.)
1994-10-18 13:40:30 +00:00
320359f8e2
change, requested by Jarle Greipsland
1994-10-17 00:08:29 +00:00
49c34d3337
move arch dependence to archs. clean up a bit. deal with weird MAXPARTITONS.
1994-10-14 18:26:22 +00:00
6f5794ecba
Fix bugs in dealing with odd-length mbufs in ed_pio_write_mbufs(). From
...
John Hood.
1994-10-14 13:05:13 +00:00
7c01f7ce51
Changes from DG to deal with some old chips that corrupt the packet length.
1994-10-12 13:42:00 +00:00
4252ca6644
Correct multicast filter calculation.
1994-10-09 21:19:04 +00:00
236f105ccd
Remove unneeded #includes.
1994-10-09 15:06:23 +00:00
5a58654e8a
Fixed bugs according to old memory system.
1994-10-08 15:46:15 +00:00
b90985ee3d
Don't poll the BUSY bit until the SDH register is set.
1994-10-07 11:34:52 +00:00
1eaa03e7dc
Fix initial allocation of dev array, and simplify the code
...
slightly.
1994-10-07 09:08:29 +00:00
86e7908a72
Make some comments more clear.
1994-10-01 07:19:32 +00:00
f7b0f89811
Various minor changes to sync better with DG's version.
1994-10-01 07:13:32 +00:00
6ddbe860c2
Update from Wolfgang Stanglemeier.
1994-10-01 06:27:56 +00:00
0e28696023
Add IO_PPI.
1994-10-01 03:52:46 +00:00
e32c213d35
Add IO_PMP[12] and IO_PMPSIZE.
1994-10-01 03:48:49 +00:00
b7cc64e049
Check the SB Pro IRQ and DRQ correctly. From Jason Thorpe.
1994-09-16 23:48:22 +00:00
c7003d37d3
Only reset FIFO if changing baud rate. From John Kohl (slightly edited).
1994-09-16 02:50:39 +00:00
8dd2c63b08
Turn off the delay debugging messages again.
1994-09-12 20:29:08 +00:00
584de55692
Missed an iobase that should be u_short.
1994-09-05 00:21:40 +00:00
5aa2f1e6bb
remove an un-aligned access
1994-08-30 17:01:57 +00:00
a13c1b15cc
Minor.
1994-08-26 12:43:17 +00:00
de20d2cf67
Re-enable EISA reset code -- definately needed now. do RX_DISCARD_TOP_PACK
...
before leaving splhigh(), to give incoming packets a better chance.
1994-08-26 12:11:44 +00:00
6c2b49032b
fix debugging stuff, from dean
1994-08-25 20:18:25 +00:00
f32f66a23b
fix (bogus) default ioctl return.
1994-08-24 16:49:16 +00:00
5e4a51278b
Set the FIFO threshold based on the receive speed, per Mark Weaver.
1994-08-24 07:25:18 +00:00
c4eac0f370
Some cleanup, checked by Dean.
1994-08-23 23:40:55 +00:00
8ac5e10c5d
Various code cleanup.
1994-08-23 19:30:12 +00:00
666f228bab
add `eg' driver for the 3c505 by <dean@fsa.ca>
1994-08-23 17:59:33 +00:00
996b2b5c54
Disable EISA reset, for now.
1994-08-22 21:53:23 +00:00
71c5da7bfb
Fix typo in WDCS_BITS.
1994-08-22 21:43:35 +00:00
8b8390a4bb
Look for MDMBUF in cflag, not lflag.
1994-08-21 15:04:37 +00:00
256353ef62
multicast
1994-08-17 06:04:49 +00:00
5f27568164
Eliminate struct pte and struct pde.
1994-08-15 14:46:45 +00:00
36975ff354
Don't use altsts. Sigh.
1994-08-15 08:22:20 +00:00
a618f9d915
Slight optimization, and don't go bonkers if one of the sub-devices is not
...
configured.
1994-08-14 14:13:25 +00:00
a570fcd929
Re-enable EISA reset.
1994-08-14 09:43:59 +00:00
cd2f7cc8a0
Clean up a little.
1994-08-14 09:24:55 +00:00
06476a4e53
ccdevsw --> cdevsw
1994-08-14 07:41:08 +00:00
692c724215
un-aligned access is not cool on some processors
1994-08-12 08:57:18 +00:00
da79c879cd
On probe or open, retry the READ CAPACITY once if the drive reports NOT READY.
1994-08-11 23:51:26 +00:00
3c3258eb6d
Make this work.
1994-08-11 04:54:13 +00:00
55b11feb0a
Update some comments.
1994-08-10 04:37:52 +00:00
8dbfcf9e2e
Add NCR 53c8XX driver, originally from Wolfgang Stanglmeier.
1994-08-09 22:20:44 +00:00
3e685aec5c
Change ST_Q_NEEDS_PAGE_0 to something more generic.
1994-08-09 18:50:17 +00:00
6df721be97
Add PCI autoconfiguration support.
1994-08-09 00:47:46 +00:00
061c42c22d
Minor update.
1994-08-08 07:09:31 +00:00
59de58a39b
Count up the silo overflows and only log a warning at most once per minute.
1994-08-07 11:27:51 +00:00
9c8afcf191
Avoid using DFIFOHF, which doesn't exist on 6260 chips. Turn off
...
AIC_USE_DWORDS by default.
1994-08-07 10:51:40 +00:00
b0db502d9c
Remove diagnostic.
1994-08-07 10:49:06 +00:00
d9a996a92e
Add multiplexer for RT 4-port serial cards.
1994-08-07 10:45:53 +00:00
b6e9bf14c8
Simplify the DEPCA memory test, and fix a problem with using the alternate
...
PROM address.
1994-08-07 00:56:04 +00:00
ebd23fe5e0
cleanup
1994-08-06 23:19:39 +00:00
558c00c001
Fix spelling of `STEREO'.
1994-08-05 22:56:19 +00:00
cefefb25ca
cleanup, working 32 bit IO on the 3c579, and memory alignment of insl/insw
...
for better performance.
1994-08-05 21:16:33 +00:00
b5c5c47f92
Obey the command queue size for the controller.
1994-08-04 09:52:47 +00:00
9d7eefb176
Change iosize to 16.
1994-08-03 09:17:12 +00:00
a17171c0a2
Add a missing splx() and increase the reset delay during probe, as suggested
...
by Juergen Keil. Add a diagnostic message if the controller info is not what
we expect.
1994-08-03 08:57:59 +00:00
8026fb53f2
Initial VAX port merging.
1994-08-02 20:18:46 +00:00
45b0217c1e
Fix up u14_find() a bit; mainly, don't include a DRQ for the 34f.
1994-07-31 19:21:40 +00:00
a00c5fdb91
Add some missing newlines in the attach messages.
1994-07-31 18:25:50 +00:00
8a9df6389d
Bug fixes from Mark Weaver.
1994-07-31 11:34:38 +00:00
53f3b61cdc
Redux.
1994-07-28 19:57:31 +00:00
c405e84a24
port --> iobase
1994-07-28 09:50:33 +00:00
d02e11d543
Make the EISA reset code like the other drivers.
1994-07-28 08:44:47 +00:00
fb500c4d07
Redo some of the EISA config stuff.
1994-07-28 02:39:21 +00:00
c1a5741a3b
Remove unused macros.
1994-07-27 15:02:59 +00:00
5e04cfb942
Fix typo.
1994-07-27 13:24:17 +00:00
4ac4810048
Normalize.
1994-07-27 13:14:14 +00:00
1939acdbd2
Fix the DMA setup.
1994-07-27 13:10:33 +00:00
1a9c6d05a3
Enable IRQ probing, and fix the DMA setup.
1994-07-27 12:57:02 +00:00
dffcd8ea8d
Enable IRQ probing.
1994-07-27 03:09:21 +00:00
16878bf2f9
Enable IRQ probing.
1994-07-27 01:50:57 +00:00
35b4db3030
Add IRQUNK.
1994-07-27 01:50:15 +00:00
863c736e39
Normalize label handling.
1994-07-26 19:39:19 +00:00
b5ce4d0cdd
Normalize label handling.
1994-07-26 19:36:06 +00:00
a18c0c0d83
Look for errors in the right place in a transmit descriptor, and count
...
collisions.
1994-07-25 22:54:58 +00:00
220a5a5095
Add missing splbio()s, pointed out by Gene Stark.
1994-07-25 04:29:56 +00:00
1c46c460ee
Return EINVAL if the requested transfer size is weird.
1994-07-21 23:44:16 +00:00
7fca65c005
Remove something which cannot possibly be correct.
1994-07-21 04:15:05 +00:00
37dc11891c
Fix a typo.
1994-07-21 03:40:53 +00:00
4469aea569
Do the EISA probing a little differently.
1994-07-21 03:30:18 +00:00
3013b3fdbc
check if eisa card exists before tromping on dma
1994-07-21 02:51:53 +00:00
cc9da7d69f
Fix failed probe message.
1994-07-16 13:45:59 +00:00
e88e13f3bb
Fix a bogon relating to >16-bit addresses that I introduced. Fix up BPF
...
support for received packets.
1994-07-15 21:20:48 +00:00
db0e00db86
Clean up a bit.
1994-07-10 17:53:12 +00:00
668c4747b3
Rename flags; clean up a bit.
1994-07-05 21:20:20 +00:00
b10a5d5fac
change to support other MAXPARTITIONS vals aside from 8
1994-07-04 20:39:46 +00:00
3214723fcf
These should have been the 4.4Lite versions. duh.
1994-07-02 06:03:47 +00:00
801d30952a
ISDEBUG --> LEDEBUG, and fix some ugly code.
1994-07-02 04:13:16 +00:00
943735dc41
modifications to the threshold and nicer error checking from christos
...
and .. splhigh() around insw/outsw code.. yetch
1994-07-01 23:08:11 +00:00
73aca695ac
Make sure we don't leave the interrupt masked after some errors.
1994-07-01 21:38:19 +00:00
2f609096e4
Inline le{rd,wr}csr().
1994-07-01 21:34:40 +00:00
bf74fc41d1
Add prototype.
1994-07-01 21:33:20 +00:00
f62bc452ca
Correct some comments.
1994-07-01 21:31:14 +00:00
66e72cdf4b
Rename is to le, and add support for some models of DEPCA.
1994-07-01 20:25:25 +00:00
fd7c79353e
knf
1994-06-29 23:32:42 +00:00
fccfa11af5
New RCS ID's, take two. they're more aesthecially pleasant, and use 'NetBSD'
1994-06-29 06:39:25 +00:00
cf92afd66e
New RCS ID's, take two. they're more aesthecially pleasant, and use 'NetBSD'
1994-06-29 06:29:24 +00:00
89e331dcad
new standard, minimally intrusive ID format
1994-06-27 19:40:57 +00:00
6f9db1ee2d
Concat disk driver moved from hp300/dev to here.
1994-06-24 14:11:02 +00:00
72679b6801
Fix a comment.
1994-06-19 03:29:37 +00:00
7d3285c3d4
resolve confusion over who owns the buf after calling scsi_scsi_cmd()
1994-06-16 15:57:39 +00:00
a69dd750a2
b_un.b_addr -> b_data
1994-06-16 01:07:30 +00:00
72cf8eaa9d
kill some pre-lite code that was #ifdef'd appropriately
1994-06-14 00:25:43 +00:00
f4a9e46aaf
Fix unimportant typos.
1994-06-13 18:54:41 +00:00
ff9c5cdde5
Set `uio_procp' field in case we ever need it.
1994-06-09 20:00:13 +00:00
3b4b77ca23
Reverse sense of vfinddev().
1994-06-08 11:19:41 +00:00
bb4ba15c7f
Add (experimental) 24f handling.
1994-06-08 11:16:49 +00:00
00eb72f54b
two fixes from christos
1994-06-04 01:52:28 +00:00
9bc7771492
Allow the probe to succeed again on 445S cards.
1994-06-03 15:56:18 +00:00
6b63c739f3
bsd 4.4-lite pmax port as ported to NetBSD
1994-05-27 08:57:32 +00:00
37c76e16d1
Only print the blasted messages *once* per error.
1994-05-27 08:54:52 +00:00
377b097932
upgrade to bsd 4.4-lite code base. only mod is rcsids
1994-05-27 08:39:00 +00:00
30c08c899f
Copyright foo.
1994-05-25 20:41:53 +00:00
0645f8963f
Check the bus type, and don't attempt to enable the round-robin algorithm
...
on early boards. As suggested by Atsushi Murai.
1994-05-24 13:39:15 +00:00
a9376b883a
MIN --> min
1994-05-24 07:31:12 +00:00
ebcaebd335
MIN -> min, MAX -> max
1994-05-24 02:35:53 +00:00
cf1b01e3cc
provide upgrade notice
1994-05-24 01:05:33 +00:00
057dc4deec
quiet compiler warnings
1994-05-23 03:02:13 +00:00
e47989d1e5
turn off spontaneous printing of messages when DEBUG turned on
1994-05-23 02:33:23 +00:00
18dab72811
32bit eisa does not work now, do not even try
1994-05-21 05:34:02 +00:00
922959fd05
Reverse the order of disabling shared memory and turning off 16-bit mode
...
where necessary, per Steve Wallace.
1994-05-19 07:47:34 +00:00
949b970c95
Use ether_ifattach() rather than doing the same thing in each driver.
1994-05-13 06:13:43 +00:00
d023a319a4
Nuke some junk in scsi_link, as pointed out by Gordon.
1994-05-12 22:16:04 +00:00
7040f728a9
Fill in some more struct ifnet fields.
1994-05-11 12:09:17 +00:00
19017044cf
Get rid of the private vnread() and vnwrite(); they are the same as rawread()
...
and rawwrite().
1994-05-11 10:03:59 +00:00
02ec14c597
Add dummy *dump() routines.
1994-05-11 09:49:17 +00:00
ef8ba60d24
Device strategy functions return void again.
1994-05-11 04:26:17 +00:00
bd96a072fd
Nothing of consequence.
1994-05-11 02:28:42 +00:00
95faa87c60
remove union's from sense_data struct, conditionaly define RAW_PART
1994-05-09 07:40:47 +00:00
fcdc2b3f3f
Remove now-bogus cast.
1994-05-05 08:31:44 +00:00
5f478330e8
Remove now-bogus casts.
1994-05-05 08:31:00 +00:00
04df00527c
Retool the state machine is a sane way.
1994-05-05 08:26:13 +00:00
685508a6b4
Remove now-bogus cast.
1994-05-05 07:52:53 +00:00
a211907a8b
Remove now-bogus cast.
1994-05-05 07:41:44 +00:00
a0a7429482
lots of changes: prototype migration, move lots of variables, definitions,
...
and structure elements around. kill some unnecessary type and macro
definitions. standardize clock handling. More changes than you'd want.
1994-05-05 05:35:42 +00:00
a9c3f137b5
Don't frob the connector type if the card doesn't grok soft config.
1994-05-05 02:20:44 +00:00
e5c1d566ef
Really fix the Buslogic/DTC problem.
1994-05-03 20:53:54 +00:00
0ee51c2c8b
Forgot to munge the #includes in last commit.
1994-05-03 20:32:22 +00:00
884168ce49
Move beep junk to clock.c.
1994-05-03 08:23:55 +00:00
36a9bcce8d
Fix argument to aic_sched_msgout() is several places, and condense some code.
1994-05-03 08:20:43 +00:00
394be046a5
insw takes a word count
1994-05-02 06:37:10 +00:00
e0db92993a
change timeout/untimeout/wakeup/sleep/tsleep args to void *
1994-04-29 23:15:51 +00:00
39718a43cc
Enable/disable shared memory access on all WD/SMC boards. Add support for
...
software selection of AUI or BNC connectors using LINK0.
1994-04-28 04:53:09 +00:00
fc844e1797
Style nits.
1994-04-26 03:43:26 +00:00
62773fc6f8
Add Adaptec 6360 driver from Jarle Greipsland, with some changes by me.
1994-04-26 00:05:56 +00:00
0e689f0375
Fix uninitialized pointer, pointed out by Michael VanLoon.
1994-04-25 03:16:03 +00:00
efbbf1b09f
Deal with variable-length drives that don't specify a maximum block size.
...
c.f. SCSI 2 protocol definition.
1994-04-24 05:40:05 +00:00
30c24e4508
bit better now, fixes from me & charles. squishy squishy squishy. HI ADAM!
1994-04-24 02:48:10 +00:00
2f66816d8b
Rename two files.
1994-04-24 01:34:05 +00:00
84752ce046
Don't need isa.h.
1994-04-24 01:29:56 +00:00
0ef8000051
Some changes from Charles, Adam and Christos Zoulas.
1994-04-23 04:31:12 +00:00
eb036e74c5
Don't need isa.h.
1994-04-22 23:02:40 +00:00
221b25fd9d
Separate DMA functions.
1994-04-22 22:58:50 +00:00
160fbf23ec
Fix typo.
1994-04-21 04:26:37 +00:00
584cd2e4c9
Clean up the TUNE_1542 code.
1994-04-21 03:37:19 +00:00
245097a031
Fix return of I/O space size from wtprobe(), as reported by Rafal Boni.
1994-04-21 00:41:52 +00:00
689156a240
Change structure member names.
1994-04-20 22:39:33 +00:00
df873c8545
Maintain the xs free list with LIST_*().
1994-04-20 22:13:33 +00:00
893be926ec
Use TAILQ_*() to maintain the drive activation queues.
1994-04-20 07:23:52 +00:00
28aa66d455
update from hibler
1994-04-20 05:01:22 +00:00
0d93a0839c
queue up 8 mbuf chains once again, perhaps this will help?
...
read packets of the card before attempting to transmit (should improve speed)
1994-04-18 12:40:39 +00:00
4816eedf31
first attempt at EISA 32bit IO support. it still doesn't work so it's
...
disabled.
1994-04-16 09:53:45 +00:00
8aca9c1cbc
support multicast and promiscious mode
...
correct mbuf queue bugs, cleanup some extra symbols
try to let link0/link1 change while running, will this work?
1994-04-15 10:51:28 +00:00
07b3588735
Patches from David Greenman to eliminate magic constants and add delays when
...
switching to and fro 16-bit access for 790s.
1994-04-14 03:54:07 +00:00
920c317ff9
deallocate mbuf cache on ifconfig down.
1994-04-13 06:09:00 +00:00
eee893f9ea
Various cleanup, but no functional differences.
1994-04-13 05:43:19 +00:00
49b3055feb
undo that last
1994-04-11 21:53:54 +00:00
34ac381d05
don't cdevvp() if a vnode for the dev already exists. Note that that's
...
conceptually icky; you end up ref'ing a 'real' vnode, and hence perhaps
tying down a file system; should be able to reference a 'fake' one,
but i doesn't appear save to cdevvp() if vnode for same dev is already
around... also, mark vfinddev()s XXX (for later).
1994-04-11 19:53:29 +00:00
e7eb2d4831
support multiple eisa/isa cards.
1994-04-11 11:09:00 +00:00
58dfc9dffc
Fix various types. Remove some outdated flags.
1994-04-11 03:53:58 +00:00
c01cb5c454
Fix various types. Remove some outdated flags. Actually sleep a bit if
...
there are too many commands pending on the controller.
1994-04-11 03:53:45 +00:00
8b10b2cd18
Combine scsi_start_unit() and scsi_stop_unit(), and increase the start
...
timeout (again).
1994-04-11 02:23:41 +00:00
e872e13605
allow MDMBUF flags to be set (oops)
1994-04-10 10:29:06 +00:00
17378eaf33
and fix the other case. ugly fix, but it works
1994-04-10 01:11:28 +00:00
f16c2e25f8
Add another rogue...
1994-04-10 00:07:02 +00:00
cabd481fa9
Don't print a duplicate message about stray interrupts.
1994-04-09 03:43:36 +00:00
fc5d3e31e0
Small fix to attach message.
1994-04-08 18:57:24 +00:00
55efebae3e
Fix return values from some interrupt routines.
1994-04-08 18:22:15 +00:00
72c593c2e3
Fix return fro isa_epprobe().
1994-04-08 17:58:47 +00:00
0ae5489036
Return correct values from edintr().
1994-04-08 17:16:39 +00:00
3f5e4f423f
Implement dynamic IRQ configuration and IRQ sharing. Inline spl*() calls.
...
Reorganize and clean up the relevant code.
1994-04-07 06:48:19 +00:00
5fe1b5b538
Redo the last change; it was compltely bogus.
1994-04-06 00:43:57 +00:00
8b1679d75d
Remove spurious arg to printf(), per JT Conklin.
1994-04-06 00:27:49 +00:00
87e831ef86
Try to detect garbage data from page 4 sense.
1994-04-06 00:23:31 +00:00
100fdbd6d1
This line is redundant for LD_UNLOAD (only one use, and it does this itself)
...
but breaks LD_RETEN, forcing a reload of the driver state on the next I/O
operation. Therefore, it goes away.
1994-04-05 22:39:37 +00:00
8d0730c420
Reload the tape after retension.
1994-04-05 22:18:00 +00:00
44f11a89b3
Implement MTRETEN (untested).
1994-04-05 22:08:09 +00:00
692dc0e998
Implement MTEOM, currently untested.
1994-04-05 21:59:49 +00:00
25317c76f3
Increase ahb_send_mbox timeout.
1994-04-05 08:53:00 +00:00
314bc1f5db
Clean up #includes.
1994-04-03 22:50:14 +00:00
9a9b1d99fa
Minor code cleanup.
1994-04-02 08:04:26 +00:00
96f452cd84
Deal with Mark Weaver's rogue tape drive.
1994-04-01 06:49:22 +00:00
5edb523880
Remove an old hack that now just causes a small memory leak during autoconfig.
1994-03-31 16:59:04 +00:00
b6f5403319
Some patches from Rafal Boni to fix egregious 3C507 mistakes.
1994-03-31 06:16:35 +00:00
23c5083a45
Minor changes.
1994-03-30 18:35:11 +00:00
8ccc7bdffb
Turn off the timeout debugging info by default.
1994-03-30 04:58:32 +00:00
ea6d9af1c2
Print out board revision info.
1994-03-30 04:07:48 +00:00
95f1b85a5a
astprobe(): Set ia_iosize.
1994-03-29 06:58:29 +00:00
592ec61b17
Updates for new autoconfig.
1994-03-29 04:35:37 +00:00
5eb99ad76e
New autoconfig mechanism. Hacked at the moment to use old config(8), but
...
look mostly like config.new to drivers.
1994-03-29 04:34:18 +00:00
6bce5180d6
New version from Sergey Ryzhkov and Serge Vakulenko.
1994-03-29 04:32:12 +00:00
e1d51562a9
New SCSI system, based on Julian's more recent work.
1994-03-29 04:30:15 +00:00
2e5a28159f
New SCSI system, based on Julian's more recent work.
1994-03-29 04:29:20 +00:00
d5a269b4dd
Put controller target in scsi_switch.
1994-03-25 07:38:51 +00:00
008f13bb69
Fix off-by-one error in comopen() unit number sanity check. From Brian de
...
Alwis.
1994-03-25 04:38:01 +00:00
c3218832ba
print even more SCSI sense data; this should be in a function...
1994-03-24 17:47:35 +00:00
20c82de12d
print out lots of info on non-media hardware error...
1994-03-24 04:32:44 +00:00
18f36e1745
copyright foo
1994-03-23 03:55:24 +00:00
a3c2ef3169
Don't poll more than 4 ports.
1994-03-23 03:04:32 +00:00
4cc5b77bfa
Some stylistic cleanup, and a very minor speedup.
1994-03-23 03:01:50 +00:00
c6b399cce8
add AST-style serial multiport support, from Roland McGrath
...
<roland@@frob.com>. Needs light clean by Mr. I386, but mostly
OK. For some reason, Bad Things (TM) happened on the last cvs commit.
1994-03-23 01:28:23 +00:00
c24c16f35f
add AST-style serial multiport support, from Roland McGrath
...
<roland@frob.com>. Needs light clean by Mr. I386, but mostly
OK.
1994-03-23 01:25:53 +00:00
456e197d26
add reasonable support for MDMBUF output flow control. input to be done later
1994-03-18 05:13:26 +00:00
b03c4f17ca
Remove two bogus splx()s.
1994-03-14 13:32:56 +00:00
936ff09fcd
Fix for trailer support reported by <sommerfeld@orchard.medford.ma.us>
1994-03-14 06:57:25 +00:00
fe3d0b99c3
Prefix the busy-wait messages with `ignore this:' so people stop reporting
...
it as a bug.
1994-03-12 22:36:40 +00:00
9ab5683dc7
Fix problem with reading the disk label if it's not at the beginning of the
...
disk.
1994-03-12 22:32:48 +00:00
39f57c7820
copy appropriate hardware config bits from config's flags
1994-03-12 08:04:19 +00:00
86ac0459be
fix some of the last; thanks to charles for looking it over...
1994-03-12 07:43:03 +00:00
c38cf8e43e
support new ioctls. fix the way CRTSCTS is used, etc. Seperate 'hardware'
...
and 'software' flags. beginnings of multiport support.
1994-03-12 07:25:16 +00:00
15d0f84500
Fix bug in last change.
1994-03-12 04:10:03 +00:00
15d758c39a
Remove backward compatibility hacks for config(8), as they are no longer
...
useful.
1994-03-12 03:45:03 +00:00
d884f7c425
Update to match config(8).
1994-03-12 03:34:02 +00:00
d72e576cfb
Rearrange top-level configuration to be more consistent.
1994-03-12 03:29:20 +00:00
119f3ea688
Various:
...
Put WDF_ERROR in the wdc_softc, to avoid gratuitously forcing non-active drives
into single-sector mode on the next transfer. Arrange to wait for an interrupt
after wdsetctlr(); this avoids long busy-wait delays, and gets rid of the
`extra interrupt' messages (except for one immediately after autoconfig on some
machines). Replace some uses of wdsetctlr() with simply lowering wd->sc_state;
no point in forcing this immediately. Allow control operations to time out.
Enable the warnings for long busy-wait delays by default. Some other minor
things not worth mentioning.
1994-03-11 23:29:12 +00:00
99dbc0692d
Add a heuristic for detecting old config(8)s. This is very temporary.
1994-03-10 22:30:06 +00:00
390f5990bb
Now that the disk probe routines are actually called, they need to return
...
something.
1994-03-10 21:52:07 +00:00
b8be52a88c
Update for new config; handles subdevices differently.
1994-03-10 21:38:46 +00:00
367c93feb4
Updates to match config(8).
1994-03-10 20:52:09 +00:00
0c19458c6f
More updates for new config.
1994-03-10 20:05:30 +00:00
aa45779df7
Update for new config.
1994-03-10 19:57:20 +00:00
095308adeb
Add isa_dmaabort().
1994-03-10 18:14:32 +00:00
e4102b8797
Cleanup to fit standard coding conventions, and *many* bugs fixed.
1994-03-10 05:18:33 +00:00
aab638bd07
Fix NS handling.
1994-03-09 17:19:10 +00:00
3a57542a30
Back out previous change for now.
1994-03-09 07:58:39 +00:00
a692d2185a
Inline spl*() calls.
1994-03-08 13:24:46 +00:00
a618881dd7
#include cpu.h in all files which use spl*().
1994-03-08 12:21:10 +00:00
49051114a6
Major cleanup and many bugs fixed; based in part on Brad Huntting's version
...
for BSD/386. More to be done when the low-level interrupt system is replaced.
1994-03-08 08:12:56 +00:00
5a17003403
Some changes inspired by Bruce Evans's driver:
...
Consolidate error reporting in one function. Actually use the dk_status and
dk_error fields, and pass around only the error bit to avoid lots of unneeded
assignments and tests. No functional differences.
1994-03-07 05:54:44 +00:00
991225bfc8
Remove DKFL_QUIET.
1994-03-07 03:18:35 +00:00
581b6ca207
Don't let uninitialized variable slip by
1994-03-06 19:34:46 +00:00
41cc9cb4f2
Better delay() from magnum branch.
1994-03-06 17:37:56 +00:00
5f4063cc56
DELAY() --> delay(). This is not a macro.
1994-03-06 17:21:44 +00:00
0c082bcaf8
DELAY() --> delay(). This is not a macro.
1994-03-06 17:18:43 +00:00
87ed28e74e
Move the drive select and various other things into wdcommand(), to avoid
...
duplicating code.
1994-03-05 08:17:06 +00:00
3e02952c52
Make sure we clear the interrupt when necessary. Why this isn't needed on
...
my hardware is a mystery.
1994-03-04 23:43:14 +00:00
652712272f
Add another missing splx().
1994-03-04 17:51:10 +00:00
0f92f76ceb
Remember to splx() on some error conditions.
1994-03-04 17:45:22 +00:00
ef3c1bf7e6
Start the timeout loop *after* we've decided there is a disk there.
1994-03-04 04:15:24 +00:00
220512c2a8
De-ANSIfy. Move the timeout counter into struct disk. Remove unneeded args
...
to wd[gs]etctlr(). Other minor changes.
1994-03-04 03:43:48 +00:00
499a02a6a9
New probe for 3c579's (EISA). EISA cards still don't work but I
...
have no idea when I'll be able to work on this next.
1994-03-04 01:31:50 +00:00
34115459a4
Upload the ether address to the card after a reset, per Matt Kimmel.
1994-03-03 15:30:27 +00:00
fa396ad402
Watch `seek complete' bit per IBM documentation. Clean up wdioctl(). Other
...
minor cleanup.
1994-03-03 01:58:21 +00:00
7b734f94ec
Be more careful about clearing the controller and drive active flags.
1994-03-02 23:27:13 +00:00
37135f9686
Add 8003W and 8003EB, per David Greenman.
1994-03-02 22:47:36 +00:00
21118b1bc4
Don't busy-wait for read or write completion.
1994-03-02 22:07:00 +00:00
469206981a
Fix prototype of wdintr().
1994-03-02 21:43:42 +00:00
e9326b3ba7
Make wdc_wait() do an implicit wait_for_unbusy(). Pass structure pointers
...
rahter than unit numbers where appropriate. Fix conflict if two drives have
I/O pending at the same time. Add some more sanity checks. Some other minor
cleanup.
1994-03-02 21:42:31 +00:00
81de6fa982
Increment outbound packet count, per Matt Kimmel.
1994-03-02 16:23:23 +00:00
a37cf2aecc
Make probe routines return amount of space used. Still needs some
...
work to determine difference between SB/SB-pro.
1994-03-02 16:23:10 +00:00
04d67df50c
Add mouse gunk.
1994-03-02 08:02:27 +00:00
2292eadf37
Set the keyboard to scancode table 1 rather than having the 8042 convert.
1994-03-02 06:46:11 +00:00
165d9e602c
Fix the 790 interrupt table, per Christoph Robitschko.
1994-03-02 03:40:46 +00:00
9091bc8257
Remove some dead code.
1994-03-01 18:22:52 +00:00
a3735835a3
New constants for setting and clearing masks.
1994-03-01 18:18:07 +00:00
7dd7c20604
Clean up DMA code. Mask and unmask channels. Warn if terminal count not
...
reached.
1994-03-01 18:16:33 +00:00
83c054bf10
Driver should now work on new & old bt742/747/445 versions of the
...
BusTech cards. Fixes from Michael VanLoon <michaelv@iastate.edu>
KNF'd too.
1994-03-01 12:42:36 +00:00
69b37af13f
Clean up a bit more; make it look like other drivers. Remove SIOCGIFADDR.
1994-03-01 05:41:26 +00:00
92dba352d6
format cop, plus fix up ether_type byte order difference.
...
things that i think look bogus are marked "XXX" with "cgd" in the
same line; some enet-savvy person should look through them.
1994-03-01 04:12:25 +00:00
a65ae4142d
Driver for 3Com Etherlink (3c501)
...
>From Matthew E. Kimmel (kimmel@cs.umass.edu )
1994-03-01 02:45:00 +00:00
8f09bb0623
add vnclose function
1994-02-27 08:41:11 +00:00
8ba740e6ab
Get the residual count right.
1994-02-26 19:49:25 +00:00
060ee7dbab
Clean up busy-wait code a little, and we need a special disksort() to skip
...
over bufs in a combined transfer.
1994-02-26 19:00:51 +00:00
969cea2357
Fix bug from 1.43 correctly.
1994-02-26 17:59:46 +00:00
4299a2baec
Fix typo.
1994-02-26 17:13:44 +00:00
aeae0fd5e3
Various cleanup, and fix last night's bug.
1994-02-26 17:10:12 +00:00
fa83b6f469
Fix typo.
1994-02-26 00:08:01 +00:00
a7cdc040ec
Some more stylistic cleanup.
1994-02-26 00:00:17 +00:00
e56750e9d0
Remove backwoods compatibility.
1994-02-25 23:09:26 +00:00
7f6bce365b
Fix an obvious bug that could stall the queue.
1994-02-25 18:30:37 +00:00
cgd