Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
76,409 Commits 606 Branches 0 Tags 3.1 GiB
2fdf447129
Commit Graph

9506 Commits

Author SHA1 Message Date
mjacob
829a533bfb Restore the change fvdl made. Sorry about not noticing it. The 
header (about 'Maintainer') is supposed to help encourage folks
to coordinate with me.
 2000-12-28 08:11:52 +00:00
augustss
5236b76556 Make message about ignored endpoint a little clearer. 2000-12-28 01:01:42 +00:00
augustss
d2098567fe Add audio terminal types. 2000-12-28 00:29:58 +00:00
tsutsui
59fcebab05 Regen. (Fix Acard UDMA IDE) 2000-12-27 15:36:42 +00:00
tsutsui
72347b9f8b Fix entries of Acard UDMA IDE controllers. 2000-12-27 15:32:33 +00:00
sato
4e15bd1d3a add Novac PCMCIA-IDE Card(Card for HD530P PCMCIA-IDE Box). 
No vendor ID, no product ID, and the wpp_cis_info is 'PCMCIA', 'PnPIDE'.
 2000-12-27 10:41:00 +00:00
augustss
bd1b9290e5 Regen. 2000-12-27 04:16:19 +00:00
augustss
96a684549d Add a VIA chipset and Nvidia GeForce2 MX. 2000-12-27 04:15:53 +00:00
mycroft
a6fe4b78f2 Um, we need rnd.h so that cs_softc is defined properly. Overrunning structures 
is bad.
NOTE: #IFDEF IN SOFTC DEFINITIONS IS BAD.
 2000-12-26 09:42:21 +00:00
jmc
5b7fb2728a Back out changes from 1.124 since the additions of *ports.master=-1 wasn't 
documented as to why it was added in and it breaks the ability to set the
gain on playback. A longer term fix to set these correctly should be done but
none of the drivers today are doing this and not being able to set the playback
volume otherwise is a bit silly.
 2000-12-25 00:01:39 +00:00
augustss
19c0d40186 Even stubs need improvements. 2000-12-24 06:42:34 +00:00
augustss
63fbac9a7d Add some placeholders for the EHCI (USB 2) driver. 
Don't get your hopes up.  I've not even finished reading the
(100+) page spec, and I have no hardware.
 2000-12-24 06:39:01 +00:00
bjh21
a48c9194bb Print the newline after the memory test. This makes it clear that the delay's 
related to this driver rather than the next device to be attached.
 2000-12-23 16:37:20 +00:00
bjh21
690a8dbae1 fix typo: sigmips -> sgimips 2000-12-23 13:41:33 +00:00
bjh21
d925692c76 Add arm26 fpu. 2000-12-23 13:40:21 +00:00
tsutsui
aa223e5bce Regen. (Adding Acard UDMA IDE controllers) 2000-12-23 10:13:20 +00:00
tsutsui
cf4a7f824c Add Acard UDMA IDE controllers. 2000-12-23 10:11:55 +00:00
wiz
c8b0b91e7e Fix pathnames in comment. 2000-12-23 01:37:57 +00:00
ad
024d36d353 - Fix bugs, make this useful. 
- Add ioctls to start and stop the co-processor (if present).
 2000-12-22 13:30:32 +00:00
onoe
2079f9d276 improve an_cmd() slightly: 
- strip unnecessary loop to get command result status
- ack command after clearing busy bit

XXX: it still sometimes get timeout to get status(0xff50) or statistics(0xff68)
     probably due to heavy load of firmware in receiving.
 2000-12-21 15:37:18 +00:00
onoe
4ee7a7cdcd use pcmcia_devinfo() to print product info. 2000-12-21 15:32:46 +00:00
mycroft
e2ef1b88bb Disable the 16-bit I/O space hack for ALL PROMISE CONTROLLERS. 
This code is TOTALLY BROKEN and causes a NULL POINTER DEREFERENCE whenever it
is fired.
 2000-12-21 01:19:24 +00:00
onoe
c6607f2fef move definition of AN_INTRS from anreg.h to anvar.h 
strip off AN_EV_CMD from AN_INTRS because it causes severe performance
problem.
 2000-12-20 23:30:36 +00:00
bjh21
35a8d9d1b4 eh, podloader 2000-12-20 21:17:35 +00:00
thorpej
e3d7d246bb Fix a debugging clause missed when fixing full-duplex support. 
Noted by Wolfgang Rupprecht.
 2000-12-20 21:06:41 +00:00
briggs
9a73f8b22b Make _sure_ that we do not use selatn3 when it is not present. Fixes a 
problem on pmax reported by Izumi Tsutsui.  Tested also on alpha and mac68k.
 2000-12-20 15:49:03 +00:00
aymeric
e08387765d The key below <escape> is now ~ (KS_asciitilde) when shifted in the 
french layout.
This is consistent with the XFree layout, and is very convenient.
 2000-12-20 14:53:18 +00:00
haya
22be9ab855 Add IO Data CBIDE2 ata interface card. 2000-12-20 09:56:34 +00:00
haya
5f8d27d58b regen. 2000-12-20 06:24:37 +00:00
haya
f899f18228 Add IO Data CBIDE2 ata interface card. 2000-12-20 06:05:13 +00:00
sommerfeld
824092cc68 Regen, because jhawk didn't 2000-12-20 05:03:37 +00:00
jhawk
391d469a00 Backout most of 1.46, because Jason checked in a load of crap from 
his local tree that doesn't build with -current...
 2000-12-20 04:36:26 +00:00
jhawk
6cca4087d9 s/NULL}/NULL }/ 
Did I mention this awk script really sucks?
 2000-12-20 04:32:48 +00:00
eeh
d1ab475964 Make the driver negotiate sync again and remove some (hopefully) superfluous 
DELAY()s.
 2000-12-20 03:19:34 +00:00
thorpej
814729d3ae Regen. 2000-12-19 17:11:38 +00:00
thorpej
d4bbed68f8 " " -> "&sp" in two entries, per Rafal Boni. 2000-12-19 17:11:22 +00:00
thorpej
54e034de88 Identify the SMC 2632W as a Prism II. From Rafal Boni, kern/11776. 2000-12-19 16:55:57 +00:00
thorpej
ef0031e520 Regen; add SMC 2632W. 2000-12-19 16:54:14 +00:00
thorpej
0ca5cacc47 Add SMC 2632W. From Rafal Boni, kern/11775. 2000-12-19 16:53:41 +00:00
pk
c6bd81f8a6 Fix reversed logic when setting setting sync-negotiation ability flag 2000-12-19 14:08:17 +00:00
nisimura
b3345434e4 Fix an error in xoffset calculation. Revealed in the case when 
ri_width is less than ri_stride and screen is layouted RI_CENTERed.
 2000-12-19 09:52:53 +00:00
onoe
684fe5613d cleanup attach procedure, use tsleep() instead of long delay (and ignore 
timeouts).
stop driver after suspend.
XXX: should use command interrupt but no document...
XXX: status update sometimes failed perhaps due to collision.
	(RID 0xff50 or 0xff68 access failed)
 2000-12-19 08:00:55 +00:00
mycroft
045091aa8f Add a big comment in the previous section of code... 2000-12-19 06:23:26 +00:00
mycroft
463d0e577e Back out previous change. 
I removed this once before a long time ago, because it's wrong and breaks
PCMCIA on some machines.  It also doesn't fix the Multia problems.
 2000-12-19 06:04:02 +00:00
eeh
0db43ad6ce Kill extra "attached" message. 2000-12-19 04:36:05 +00:00
onoe
f9af49b21b I've inverted the logic of an_probe() in my previous commit to dev/ic/an.c 2000-12-19 01:59:21 +00:00
perseant
3475e639f3 Add register #defines similar to those in <dev/pci/tgareg.h>, referring to 
a 32-bit sfb_reg_t, for easy comparison between tga and sfb Xservers.
 2000-12-19 01:25:46 +00:00
mjl
aaad4d0284 Add quirk for Avance Logic ALS100+, which doesn't like it's irq/drq 
being set in pnp mode.
 2000-12-19 01:09:15 +00:00
mjl
324ff9ac52 Regen 2000-12-19 01:08:13 +00:00
mjl
a006fdf328 Correct ALS100+ entry. 2000-12-19 01:07:52 +00:00
thorpej
ba4b6847df Fix a problem with the ALTQ changes that can cause bogus memory 
refernces.  Problem reported by Luke Mewburn.
 2000-12-19 00:06:01 +00:00
thorpej
4dbafc4a71 Remove an IF_PREPEND() that slipped through. 2000-12-18 23:57:13 +00:00
briggs
7ea0edc288 If the target rejects a tag message, turn off tagged transfers for that target. 
Also, adjust message/command construction in ncr53c9x_select() to work no
matter how the structure alignment works out (needed at least for m68k).
Tested by me on mac68k & alpha, and sanity-checked by eeh.
 2000-12-18 23:39:44 +00:00
thorpej
57a13edc11 Use separate interrupt handlers for play and record the chip has 
support for it and we're configured for separate play and record
DRQs.  This makes full-duplex audio work on the Windows Sound System
(found in many Alpha systems).

Submitted by Juergen Weiss <weiss@uni-mainz.de> in kern/11178.
 2000-12-18 21:31:32 +00:00
thorpej
7cc029e16c Use IST_LEVEL as appropriate. Fixes PCMCIA interrupt problems 
on the DEC Multia.  From Juergen Weiss <weiss@Uni-Mainz.DE>.
 2000-12-18 21:17:44 +00:00
thorpej
df6482a625 ALTQ'ify. 2000-12-18 20:32:08 +00:00
thorpej
cc6e5d835f Adapt to ALTQ-related API changes (driver is not fully ALTQ'ified yet). 2000-12-18 20:23:04 +00:00
matt
9efc721402 Don't use atapi_print since if there are no wdc's, it won't be present. 2000-12-18 19:57:47 +00:00
abs
cf699a23e5 Add a 'value engineered' generic pcmcia CD-ROM drive, badged 'AMACOM'. 
No vendor ID, no product ID, and the wpp_cis_info is 'PCMCIA', 'CD-ROM'.
I'd be encouraged at some progress towards 'generic devices', except
someone else is bound to produce something that identifies the same, but
requires a quirk. Can I go back to my sparc now?
Make two other comments consistent while here.
 2000-12-18 17:21:11 +00:00
mjl
e2372c3a0b Regen 2000-12-18 17:00:44 +00:00
mjl
ca4a96b3da Add Avance Logic ALS100+ 2000-12-18 16:55:46 +00:00
tsutsui
3bd1aace1b Add missed le32toh() in uhci_device_isoc_abort(). 2000-12-18 15:55:30 +00:00
thorpej
f41028779b Add back the code that clears "odd" in VCHR. This shouldn't be 
necessary, but we haven't made X cope with the wierd size yet.
 2000-12-17 22:23:12 +00:00
pk
4bcb826e27 Cast a bus_addr_t' argument to u_long' for `%lx' format (XXX..) 2000-12-17 21:50:14 +00:00
thorpej
19c3f4691f ISAPnP front-end for the Aironet 802.11 cards. Note this is currently 
untested.
 2000-12-17 20:34:40 +00:00
thorpej
5b67bb41a2 Regen; added Aironet 802.11. 2000-12-17 20:17:20 +00:00
thorpej
8c28f8f467 Add Aironet ISAPnP device ID. 2000-12-17 20:16:03 +00:00
bouyer
179157be03 Fix a reversed test. 
Partial fix for kern/11726: now the kernel find the drives, but panics
after a device has been mounted.
 2000-12-17 19:35:23 +00:00
ad
b5aee7bd4c Thinko. 2000-12-17 14:46:43 +00:00
ad
3b02b279aa Regen. 2000-12-17 13:56:19 +00:00
ad
d092cb0d0a Sync with PixelStamp drivers. 2000-12-17 13:56:05 +00:00
ad
553c5108d4 Add wscons drivers for the DEC PixelStamp graphics accelerators. 2000-12-17 13:52:03 +00:00
jmc
2967c3fac3 In fdcattach() reset the controller before moving on as some probes (ala pnpbios) may not have reset during match 2000-12-17 07:37:31 +00:00
eeh
519aef8cf4 Make sure bits in the flags are disjoint. 2000-12-17 06:18:21 +00:00
briggs
d25ab824c8 Back out previous change. It appears to be in error. There is something 
else that is causing the esp driver on the mac68k to fail miserably.
 2000-12-17 04:38:29 +00:00
briggs
0debc0e91e At least the 53c96 does not work with the selatn3 command. Disable it 
for both the 53c94 and 53c96.  This also addresses PR port-mac68k/11716.
 2000-12-17 03:29:03 +00:00
augustss
d1c538bc2f Don't repeat 'host controller halted' message. From OpenBSD. 2000-12-16 16:09:24 +00:00
oster
b36a1a085e For the RF_ASSERT() and RF_PANIC() macros, call a function to do the 
sprintf, instead of doing the sprintf in the macros.  This means just
1 copy of each of the error messages, chopping about about 16K off the
size of an i386 kernel.  Thanks to Simon Burge and Enami Tsugutomo
for providing the inspiration to do this.
 2000-12-15 02:12:58 +00:00
lukem
146ab1ba9b s/pio/PIO/ and s/lba/LBA/ in messages output to users 2000-12-14 23:56:18 +00:00
thorpej
8489b5e4cf if_qflush() -> IFQ_PURGE() 2000-12-14 17:48:23 +00:00
thorpej
71cbcad899 ALTQ'ify. 2000-12-14 07:51:36 +00:00
thorpej
b0c9cd5f7b ALTQ'ify. 2000-12-14 07:27:21 +00:00
thorpej
a64a0f8137 ALTQ'ify. 2000-12-14 07:15:45 +00:00
thorpej
64778c5e5c XXX ALTQ (not done in 1394 layer yet). 2000-12-14 07:03:50 +00:00
thorpej
08afcfb9bd ALTQ'ify. 2000-12-14 06:59:01 +00:00
thorpej
1646284c95 ALTQ'ify. 2000-12-14 06:42:57 +00:00
thorpej
6b16911a43 ALTQ'ify. 2000-12-14 06:27:23 +00:00
onoe
a7125e435c Add PCI version of Aironet, not tested at all. 
ISA/ISApnp version won't come since I don't know about isa...
 2000-12-14 04:11:25 +00:00
onoe
3bfa857782 regen 2000-12-14 04:06:05 +00:00
onoe
32b5d5c3bb add Aironet 4500/4800 2000-12-14 04:05:38 +00:00
onoe
d5dd5139a3 Support 80211NWKEY and 80211POWER ioctl. 2000-12-13 20:21:10 +00:00
enami
b31ace33b7 Add RCS Id. 2000-12-13 11:30:14 +00:00
mycroft
69d3816bec Make this compile again. *sigh* 2000-12-13 07:35:49 +00:00
augustss
34bb7b9a35 Don't try to access a device that is being disconnected when generating 
the detach event.  Fixes (I hope) PR 11713 from itohy@netbsd.org (ITOH Yasufumi).
 2000-12-13 04:05:14 +00:00
augustss
eb210eda08 Make the ohci driver not hang suspend/resume. It still doesn't resume 
correctly.  From itohy@netbsd.org (ITOH Yasufumi) PR kern/11714.
 2000-12-13 03:09:06 +00:00
augustss
4df48420a1 Another Ethernet device. From nagae@tk.airnet.ne.jp in PR kern/11711. 2000-12-13 02:49:22 +00:00
augustss
9214be27c3 Regen. 2000-12-13 02:48:25 +00:00
augustss
9e199a03e6 Add another Melco LUA-TX device. 2000-12-13 02:47:26 +00:00
thorpej
c5293456da Adapt to bpfattach() changes, and further centralize the bpfattach() 
and bpfdetach() calls into link-type subroutines where possible.
 2000-12-12 18:00:22 +00:00
thorpej
d197326e7a Add a missing return after freeing an mbuf. From Dave Huang <khym@bga.com>. 2000-12-12 17:25:34 +00:00
onoe
aa513e6338 add support(?) for PC4500 which is a 2Mbps product. 
Though ifconfig -m no longer show 5Mbps/11Mbps for PC4500 by this fix,
I cannot find how to set fixed transmit speed to the firmware.
FreeBSD version of driver apparently ignore the value set by ancontrol(8).
 2000-12-12 05:34:02 +00:00
onoe
99675e3dde cleanup headers: remove duplicate definition, split reg.h/var.h. 2000-12-12 05:11:15 +00:00
thorpej
c0bcfa5994 Support SIOC{G,S}80211POWER. 2000-12-12 04:04:29 +00:00
thorpej
41d6a62c1c s/Ethernet/802.11/ when printing the address. 2000-12-12 01:32:34 +00:00
onoe
c63194c7af To fix panic at "ifconfig an0 down", 
define ANCACHE in if_an_pcmcia.c (XXX)
try not to access registers after interface down.
 2000-12-11 23:58:55 +00:00
onoe
9c25e9208a Port 'an' driver for Aironet PC4500/PC4800 IEEE802.11 card from FreeBSD. 
This is very adhoc work for IETF meeting.
- Since it seems that 'an' and 'wi' have similar hardware, low level
  functions should be shared.
- There are PCI/ISA cards of Aironet but not supported yet.
- The wiconfig interface is changed so that wiconfig cannot be used.
- 'ancontrol' of FreeBSD is not ported.
- Only infrastructure mode is tested.
- WEP is not supported.

Though I only have an Aironet card, Cisco card should be expected to work.
 2000-12-11 23:16:50 +00:00
thorpej
17bf4cff64 Add support for 802.11 authentication frames, required to interoperate 
with Aviator Pro cards on Windows.  Written by Steve Weiss for OpenBSD,
ported to NetBSD by me.
 2000-12-11 17:53:19 +00:00
ws
8132c2a6aa Fix the previous differently: 
The intent was to protect the full range of ports on the board by the
barriers.  But the start address was wrong.  Fix it.

While here, change two other barriers to also protect the full range
(not only the nic ports), and add yet another similar barrier.
 2000-12-11 17:07:38 +00:00
ad
2940363203 Report soft-errors-per-unit once per minute at most. 2000-12-11 13:19:50 +00:00
augustss
6e11678a15 Get rid of UQ_ASSUME_CM_OVER_DATA quirk; it's handled differently now. 2000-12-11 05:41:00 +00:00
eeh
af770220fa Fix for chips that don't grok NCRCMD_SELATN3. 2000-12-10 19:25:07 +00:00
jdolecek
48f421c3fa do not try to get/set sample rate on codecs which don't support variable 
rate audio - always report/use fixed rate of 44100 for them, so that the
other audio code DTRT
 2000-12-10 15:43:02 +00:00
castor
dac94f4d7b Make sc->wi_txbuf an array of u_int16_t instead u_int8_t so alignment 
is handled correctly.  Thanks to Martin Husemann for nagging me to
do the right thing.
 2000-12-09 22:59:44 +00:00
matt
632d2ad2ee Don't use __hpcmips__, but hpcmips 2000-12-09 20:35:31 +00:00
mjacob
af2807f9f7 Finally fix this driver to be sensible about the ENDIAN dance. It's not 
quite simply a question of the Qlogic being little endian and having
to have stuff swapped on big endian machines- it also has to do with the
fact that the SBus and PCI DMA layouts are wierd with respect to this.

At any rate, now finally fixed- works on Mac G4, tested it on a SS10
for sparc, checked on alpha to see if I've broken anything, and as
soon as I get another spare afternoon I'll finally install a sparc64
version which should just work (as it'll be like the Mac).
 2000-12-09 08:06:31 +00:00
imp
c6e883d603 Change $Id: to $NetBSD$ 2000-12-09 06:54:27 +00:00
tsutsui
fd97da6384 Add (missed) bus_dmemem_free() in rtk_detach(). 2000-12-09 02:02:20 +00:00
mycroft
1ac1248e45 Turn off the damned TI `VCC protection' bit. 2000-12-08 21:51:02 +00:00
drochner
aa2b1723f5 regen 2000-12-08 18:38:15 +00:00
drochner
917a1a2bfe add IBM microdrive 2000-12-08 18:37:24 +00:00
martin
d9d7c42e0c Remove esp specific function from ddb when esp @ sbus is not included 
in the kernel config. Makes compiling sbus-less kernels possible again.
 2000-12-08 17:29:12 +00:00
haya
2b0374c5d9 WORKAROUND: CardBus bridge avoids turning off the power of channel in 
shutdown hook when the bridge chip is TI113X.  Because PowerBook 2400
hangs here.
 2000-12-08 10:24:14 +00:00
itojun
0db3a835e2 regen 2000-12-08 08:13:45 +00:00
itojun
313bdadaa7 add STSN internet access device (no driver yet) 2000-12-08 08:13:34 +00:00
augustss
e5de940d42 Add a DIAGNOSTIC message. 2000-12-08 02:33:44 +00:00
augustss
a48cc8927a Don't access (in core) disk label of a removable disk that is not there. 2000-12-08 02:30:51 +00:00
augustss
330a5e12fa Don't call ether_ifdetach since we're not an ether driver. 2000-12-08 02:24:07 +00:00
augustss
dfd78cfc78 Set the debug level to 0. 2000-12-08 01:53:44 +00:00
abs
25808cb569 Wrap call to mpu_intr in NMPU - nowbuildswithout 'mpu at fms' in config 2000-12-07 14:12:30 +00:00
augustss
28ca8986f0 Regen. 2000-12-07 01:02:42 +00:00
augustss
2532d95d53 Add an Atmel hub and a Logitech mouse. 2000-12-07 01:02:12 +00:00
jdolecek
80a6068f99 add I/O Data USB-ET/T (which uses KL5KUSB101B) to the list 
Patch sent in kern/11635 by ORI Manabu
 2000-12-06 21:44:08 +00:00
jdolecek
08ab4a9ad7 regen 2000-12-06 21:39:28 +00:00
jdolecek
c3dbd34e68 add I/O Data USB-ET/T id, sent in kern/11635 by ORI Manabu 2000-12-06 21:38:03 +00:00
matt
3f127261f3 Un __P'ed. 2000-12-06 18:57:37 +00:00
mjacob
3741d38c44 Correct omission by the previous committer. 2000-12-06 06:33:56 +00:00
drochner
0d60fd2773 regen 2000-12-05 18:11:02 +00:00
drochner
ae62042f01 add some chips I met in the last weeks 2000-12-05 18:10:19 +00:00
drochner
2d8bb6f643 add some missing definitions for hungarian keymap support 
(It won't help much since there is no way to get characters not in
iso-1 or the function key set through the vt100/sun/dumb terminal
emulations:-(
 2000-12-05 17:53:46 +00:00
augustss
f680fa762c Make sure to increment reference count while the (lengthy) opening 
operation is happening so we don't lose on disconnect.
 2000-12-05 14:01:33 +00:00
tsutsui
e8bfefe60c - Since rtk_rxeof() was rewritten, we don't have to reserve a few bytes 
before the Rx buffer.
- Reduce delay on EEPROM access.
- Some more cosmetics.
 2000-12-05 11:11:49 +00:00
augustss
d801d9ec2b Regen. 2000-12-05 03:12:47 +00:00
augustss
d604cf563b Add another Epson printer. 2000-12-05 03:12:11 +00:00
oster
7a8eea351b Fix a couple of warnings about uninitialized variables. Thanks go to 
Frank van der Linden for pointing these out.
 2000-12-05 01:35:56 +00:00
fvdl
56fd0b02d5 Avoid format warnings. 2000-12-04 20:25:40 +00:00
fvdl
245940b894 Clean up warnings in 32bit compile (bus_space_handle_t is 64bit wide 
but will only contain 32bit values; casting via u_long is safe)
 2000-12-04 20:17:10 +00:00
fvdl
e58fff48bf Avoid compile warning on sparc64 32bit. sc_buffer doesn't seem to be 
used at all, this line can probably be removed.
 2000-12-04 20:12:55 +00:00
ad
7433fb33e8 In wsdisplay_switchtoconsole(), ensure that the switch happens 
synchronously. Suggested by drochner.
 2000-12-04 13:22:17 +00:00
fvdl
b6d9ce390e Comment out 2 cases of unitialized variable use (only used when 
debugging is switched on, though).
 2000-12-04 11:35:46 +00:00
fvdl
d26269e0a6 'error' was not initialized in the _ioctl function, potentially returning 
!= 0 values in the non-error case.
 2000-12-04 11:18:49 +00:00
fvdl
0888965bb7 Remove uninitialized variable usage (it was redundant anyway). 2000-12-04 11:05:32 +00:00
augustss
0a739c7166 A portability define. 2000-12-04 03:38:56 +00:00
augustss
f4d0a8c54a Regen. 2000-12-04 03:37:07 +00:00
augustss
e2925e0555 Add YAP Phone. 2000-12-04 03:36:42 +00:00
eeh
2a50931a1c Turn on TAG QUEUE support and add some debug stuff. 2000-12-03 23:31:13 +00:00
eeh
03e0f9950a Fix bug in non-dma select code i added. 2000-12-03 23:25:24 +00:00
jlam
9cfd45593f Set range of memory protected by read/write bus space barriers to the 
correct size, instead of extending past the mapped region.
 2000-12-03 23:15:23 +00:00
ad
e931ce9485 Oops. 2000-12-03 15:51:53 +00:00
ad
433cc4cf9e Nit. 2000-12-03 15:51:36 +00:00
tsutsui
311a1a842c Clean up receive interrupt routine: 
- Use MGETHDR + MCLGET + memcpy rathar than m_devget + m_adj + m_copyback.
- Call bus_dmamap_sync(9) correctly for Rx buffer.

Mostly from thorpej's if_rtp.c.
 2000-12-03 14:24:17 +00:00
ad
3bcc9b9f3a Fix a comment. 2000-12-03 13:34:37 +00:00
ad
9ecde86321 I2O HBAs provide an abstracted view of the bus; use SCBUSIOLLSCAN to give 
them an oppertunity to re-scan it before we do.
 2000-12-03 13:30:36 +00:00
ad
af9d4c4fa4 - Only configure un-claimed devices. Implement re-configuration. 
- Adhere to the spec better in some places. Also, work around some quirks
  noted in the Linux I2O code.
- Register event handlers for the executive and RBS devices.
- Fix a number of buglets and tidy a little.
- Implement a message pass-through interface and some other useful ioctls.
 2000-12-03 13:17:03 +00:00
ad
1e6732dca4 - Force the memory mapping uncacheable. 
- We don't need a record of the I/O space mapping.
 2000-12-03 13:05:14 +00:00
ad
a5248b66cf Make it possible to detach ld devices. 2000-12-03 13:03:30 +00:00
ragge
8dcc655ab0 Remove lkc, add lkkbd/lkms. 2000-12-02 17:19:27 +00:00
ragge
47dabcfc3f Support files to use wskbd/wsmouse on VAXen with DZ-like chips. 
From Matthew Fredette (fredette@MIT.EDU).
 2000-12-02 17:03:55 +00:00
ragge
23eb2da75d Accept the "Utför" key as a giant ctrl-alt key. On LK201 "Ctrl" and 
"Compose" cannot be pressed at the same time.
 2000-12-02 16:57:41 +00:00
fvdl
2b69243845 Add AHC_NO_TAGS option to switch off tagged queueing. Done because 
tagged queueing has a severe performance impact (60%) on write
throughput with UBC. Needs investigation.
 2000-12-02 14:53:01 +00:00
augustss
a51ea43fd6 Make this compile again (on i386). 2000-12-01 04:37:54 +00:00
pk
d736ce5086 We don't need <sys/proc.h>, <sys/user.h> and <machine/cpu.h>. 2000-11-30 23:21:39 +00:00
pk
55fa60c3e5 De-__P(). 2000-11-30 23:12:43 +00:00
pk
58b6f2ef7d KNF patrol && De-__P(). 2000-11-30 23:06:44 +00:00
pk
03903e1da8 KNF patrol. 2000-11-30 23:01:03 +00:00
thorpej
ec15125b5b Don't restrict I/O space to 16-bits on the Promise Ultra/33 boards. 
Empirical evidence suggests that the board works just fine with
an I/O address >= 0x10000.
 2000-11-30 18:11:40 +00:00
tsutsui
786dc5161c Clarify RX status header length and some cosmetics. 2000-11-30 15:51:57 +00:00
tsutsui
fd4d074b27 After rev 1.16 rtk driver uses the CRC from the chip, 
so no need to adjust Rx address for it. Fixes kern/11301.
 2000-11-30 15:33:04 +00:00
thorpej
64222ad03a Fix some printf formats, and remove SPARC-specific debugging stuff. 2000-11-30 14:41:46 +00:00
pk
7006bcd449 Fix two cases of reversed arguments to printf(); 2000-11-30 09:58:03 +00:00
enami
99a39489d8 Pass the right size of object (in this case, a trailer) to fwohci_buf_pktget. 
Since the fp_trail is a pointer to trailer, we have to pass sizeof(*fp_trail)
instead of sizeof(fp_trail).
 2000-11-30 06:59:08 +00:00
enami
a89beb967d Make this file compiles on alpha even if FW_DEBUG is defined. 2000-11-30 06:42:26 +00:00
enami
4792308b32 Pass the right max segment size to bus_dmamap_create. 2000-11-30 06:36:43 +00:00
eeh
9e7aa98aa6 Add TAG QUEUE support to the ncr53c9x driver. 2000-11-30 00:19:25 +00:00
thorpej
14f5ab8928 ANSI'ify. 2000-11-29 18:22:17 +00:00
wiz
972c941cf6 Fix typo in comment reported by Tetsuya Isaki in kern/11587. 2000-11-29 12:49:56 +00:00
matt
435b4c7b35 Fix c896 support. If the first mem bar is 64bit, then the second one will 
be too.  And offset for the 2nd being after the 1st by a 64-bit bar, not
32-bit.
 2000-11-29 02:00:38 +00:00
thorpej
454f740bd4 Use AC97_REG_* constants rather than defining them ourselves. 2000-11-28 16:57:16 +00:00
thorpej
997701c6c1 Define additional AC'97 registers. 2000-11-28 16:54:17 +00:00
haya
92f11ef3d3 BUG FIX: change enable sequence for 16-bit pcmcia cards. This change 
provides better (not perfect) reset sequence.  The most significant
change is asserting output enable reg before power up.  Stop routing
interrupt during reset.
 2000-11-28 09:11:36 +00:00
thorpej
443bd6369f Device driver for the built-in audio on Intel ICH, ICH0, ICH2, 
and i440MX chipsets.  Based on a driver by Michael Shalayeff,
modified somewhat by me to use bus_dma properly, and fix some
audio encoding emulation bugs.

Thanks to Manuel Bouyer for testing and feedback.
 2000-11-28 05:12:29 +00:00
matt
1aa6c9fb10 Add prep support. change all __foo__ to foo. We don't __foo__ in the kernel 2000-11-27 21:51:02 +00:00
haya
02aaf95f67 BUG FIX: pccbb turns off PC Cards' power on the bus in shutdown hook. 
Some machines cannot reboot without this fix.
 2000-11-27 09:04:32 +00:00
chs
aeda8d3b77 Initial integration of the Unified Buffer Cache project. 2000-11-27 08:39:39 +00:00
thorpej
25491e6a22 Power management (well, suspend/resume) is now implemented. Remove 
it from the TODO list.
 2000-11-27 02:37:14 +00:00
sommerfeld
248928c7cf Add a powerhook to reload AC97 registers after a resume. 
Sound now works after suspend/resume on my Sony PCG-Z505S
 2000-11-27 01:56:53 +00:00
augustss
7ec52ba411 Improve a debug message. 2000-11-26 21:05:02 +00:00
augustss
88bf6139e5 Regen. 2000-11-26 21:04:43 +00:00
augustss
63dfc5b570 Add an Intel camera (rfom OpenBSD). 2000-11-26 21:04:20 +00:00
ad
04a83acaf7 lsu -> ld 2000-11-26 19:24:24 +00:00
ad
57ea462da2 lsu -> ld, by popular request. 2000-11-26 17:44:02 +00:00
ad
ee170a5528 Avoid a possible stall. 2000-11-26 16:16:04 +00:00
takemura
3c9d9276dc Add new powerhook argument values, PWR_SOFTSUSPEND, PWR_SOFTSTANDBY and 
PWR_SOFTRESUME. Apm calls powerhook with the values in normal interrupt
priority level while others are protected with splhigh().
 2000-11-26 11:08:57 +00:00
simonb
d76cf8b502 Add multiple include detection - all userland installed headers are now 
safe.
 2000-11-26 06:03:24 +00:00
christos
12269bd46c Don't try to use ultra-dma on sis chips with revision 0xd0. It loses 
immediately with a lost interrupt on udma mode 2, downgrades to mode 1
at which point it silently corrupts data on high disk activity. This
happens on two out of 3 machines I own that exhibit high disk activity.
 2000-11-26 04:59:18 +00:00
nisimura
2e93099aff Replace sfb_copycols() which can run better job in some degree. 
It still fails on certain conditions, thus is left commented out.
copycols() is done by a generic routine which works correctly.
 2000-11-25 11:43:42 +00:00
tsutsui
1e1862bc57 Add another font from 4.4BSD-Lite2/luna68k. 2000-11-24 15:47:15 +00:00
nisimura
b974ee7790 Add TC option card descriptions, which are commented out before NetBSD/pmax 
yields local implementations to them.
 2000-11-24 05:02:26 +00:00
chs
fa19fe52db adjust the spinlock macros in the non-MULTIPROCESSOR, non-LOCKDEBUG case 
so that gcc will think that static spinlock are used.
this allows us to remove the ugly conditionalization of
static spinlock declarations.
 2000-11-24 03:59:07 +00:00
chs
f6b62f776c avoid division and remainder operations for devices where 
the sector size is DEV_BSIZE (ie. practically everything).
 2000-11-24 00:17:35 +00:00
nisimura
0661e6718b - fix an error in uninitialized variable reference. 
- add a missing function argument declaration.
- minor comment adjustments.
 2000-11-22 06:59:08 +00:00
soren
efadefb53f In uhci_intr(), only warn about power state confusion if the 
interrupt was actually for us.
 2000-11-22 05:50:59 +00:00
soren
a622a1b6d2 Remove obsolete comment. 2000-11-22 00:32:24 +00:00
tsutsui
690b28f91e Add a couple of fonts used on Sony NEWS. 
Generated from (recently removed) sys/arch/newsmips/dev/fnt{,24}.c.
 2000-11-21 11:44:45 +00:00
nisimura
ce10334de9 Fix errors in color lookup table initialization. Glyph is rendered 
in visible color now.
 2000-11-21 07:42:02 +00:00
soren
290a66c213 Reduce probe noise. 2000-11-21 05:23:37 +00:00
soren
1a5d87c9fa Regen. 2000-11-21 00:25:43 +00:00
soren
219abdb871 Typo. 2000-11-21 00:25:35 +00:00
soren
6faa85c6d3 Note 3Com card support. 2000-11-21 00:25:20 +00:00
soren
6f8985cf15 Regen. 2000-11-21 00:25:04 +00:00
soren
7736bcc821 Add Prolific printer adapter. 2000-11-21 00:24:12 +00:00
soren
e38c89a886 s/iRDA/IrDA/ 2000-11-21 00:20:30 +00:00
jdolecek
1964a728da add moxa 2000-11-20 19:27:16 +00:00
jdolecek
c27af44fc0 Add an attachment for MOXA 168P isa multiport card. This code was 
written by Christoph Badura.
This was reported to work by user of this code. It's not tested
by me, but it's probably more useful in tree anyway.
 2000-11-20 19:24:39 +00:00
onoe
2819c7b688 Use DMA from mbuf instead of copy in transmit. 
Still use memcpy in receiving because we must use buffer fill mode
	and many packets may share single receive buffer.

XXX: Workaround(?) for CXD3222: it fails to DMA for selfid packet according
to code placement. I'm not sure about the reason (cache? timing? bug?).

Fixed the bug: transmitter sometimes stop and OACTIVE bit of if_fw
never be cleared.
Fixed the bug: freeing free buffer.

Enable ieee1394_drain and ieee1394_watchdog for loss of fragment.
 2000-11-20 12:12:18 +00:00
chs
c62d17a551 rationalize the use of b_flags for geteblk() buffers. 
rather than assigning to the whole field, set or clear individual flags,
which implies that the B_BUSY and B_INVAL flags will remain set.
this allows us to make the assertion in brelse() that B_BUSY is set,
which is the purpose of all this.
 2000-11-20 08:24:08 +00:00
onoe
4e1e677996 regen. 
CXD32222 -> CXD3222 (Sony OHCI Controller)
 2000-11-20 06:23:13 +00:00
onoe
e51b1f604e CXD32222 -> CXD3222 (Sony OHCI Controller) 2000-11-20 06:22:13 +00:00
bouyer
d81861796a Add support for Intel ICH2 2000-11-19 15:32:24 +00:00
sommerfeld
acc196c4a9 Initialize ring buffer pointers when the ring buffer is allocated. 
(comsoft() can be invoked before comopen() on serial consoles; a character
received before the console is opened "for real" can result in a fatal trap
unless the ring buffer pointers are initialized early)
 2000-11-18 15:46:23 +00:00
thorpej
0aea00f57c Regen. 2000-11-18 05:29:27 +00:00
thorpej
cec0022eeb Add some 3D Labs products, from XFree86, via groo@netbsd.org 2000-11-18 05:29:00 +00:00
bouyer
1e533cd38c Pull up FreeBSD changes: 
1.39:
Have if_ti stop "hiding" the softc pointer in the buffer region. Rather,
use the available void * passed to the free routine and pass the softc
pointer through there.
1.33:
Add support for the Netgear GA620T copper gigabit card.
1.32:
Tweak probe message so that 1000baseSX and 1000baseT cards are
explicitly identified.
1.31:
Update the Tigon driver to support 1000baseTX gigE over copper AceNIC
cards. This basically involves switching to the 12.4.13 firmware, plus
a couple of minor tweaks to the driver.

NetBSD changes:
get rid of ti_inuse, the mbuf ref counting code should call ti_free() when
needed.
Use hardware 802.1q support.
 2000-11-17 19:33:25 +00:00
bouyer
54e36dbaa6 Update to firmware 12.4.13+wpaul, from FreeBSD 2000-11-17 19:23:35 +00:00
bouyer
42681a6a9f Supports ETHERCAP_VLAN_MTU. Tested on sbus hme on Ultra/1. 
Thanks to Andrei Petrov for the hint !
 2000-11-17 19:08:00 +00:00
jdolecek
4046a1bd78 if AC97_CODEC_DOES_VRA is not supported, only print warning than 
hw Variable Rate Audio is not supported and continue attaching the driver.
This is I believe more correct than what was done in rev 1.5
 2000-11-15 21:06:33 +00:00
augustss
ef36370776 Regen. 2000-11-15 14:36:50 +00:00
augustss
d57ee8b358 Add Sony memory stick. 2000-11-15 14:36:09 +00:00
pk
503701f0d3 OF_nextprop: make OUT argument type `void *' 2000-11-15 14:27:26 +00:00
thorpej
b84f740be0 Move bpfattach()/bpfdetach() calls into ether_ifattach()/ether_ifdetach(). 2000-11-15 01:02:11 +00:00
matt
c0122f4013 Add fwlynx PCI attachment 2000-11-14 23:40:44 +00:00
matt
ffd7494144 Add openfirm 2000-11-14 23:37:58 +00:00
matt
617742b256 Add a fwlynx device. Move the file for fwohci to files.ieee1394 2000-11-14 23:37:20 +00:00
matt
1936d0565a some cleanup. Add back OFIOCGETOPTNODE. 2000-11-14 21:10:05 +00:00
matt
a790bc7690 Add OFIOCGETOPTNODE (now that I know how to implement it). 2000-11-14 21:07:26 +00:00
itojun
99fac6ed3e need uvm/uvm_extern.h for PAGE_SIZE 2000-11-14 19:44:34 +00:00
thorpej
cfe0892ed3 NBPG -> PAGE_SIZE 2000-11-14 18:42:55 +00:00
thorpej
60f33f91c2 Pull in <uvm/uvm_extern.h> 2000-11-14 18:35:10 +00:00
thorpej
275539f03c NBPG -> PAGE_SIZE 2000-11-14 18:21:00 +00:00
bouyer
34a57dc139 Regen. 2000-11-14 16:20:55 +00:00
bouyer
41e8f20175 Add Alteon and netgear 1000baseT variants of the gigabit ethernet adapter. 
From FreeBSD
 2000-11-14 16:20:20 +00:00
augustss
1ae6bcbbf0 Acerscan 320U doesn't do strings right. From FreeBSD. 2000-11-14 15:33:04 +00:00
augustss
ab324086df Set the open flag when opening the scanner. 2000-11-14 13:57:16 +00:00
onoe
f1c77e81db Add support for link fragmentation and reassemble for IEEE-1394. 
XXX: drain is still not yet implemented, thus memory leak will occur
    in case of any of fragment lost.
 2000-11-14 11:14:55 +00:00
pk
fbf62501af Mark the "TOSHIBA, XM-4101TASUNSLCD" CD-R for a-sync operation only. 2000-11-14 08:52:35 +00:00
matt
7d085e8e51 Add openfirmio which is an ioctl interface to OpenFirmware. 2000-11-14 06:45:54 +00:00
matt
3b275bc230 Add OF_nextprop and OF_setprop prototypes. 2000-11-14 06:44:12 +00:00
matt
1365092255 de __P'd. 2000-11-14 06:42:27 +00:00
pk
4c54ce2034 Define ncr53c9x_ioctl() and use it to start sync negotiation. 2000-11-13 15:24:22 +00:00
bouyer
089961e7c5 - use jumbo rx if mtu is too big to fit in one mbuf, not when larger than 
ETHERMTU.
- add support for ETHERCAP_VLAN_MTU.
 2000-11-12 18:32:43 +00:00
pk
ad9bda9339 Change nvram size' data type to bus_size_t'. 2000-11-11 11:59:42 +00:00
pk
035ceca5b2 Add note about time-of-day and interval timer programming on this chip 
are combined into the same (write-only!) control register.
 2000-11-11 11:18:07 +00:00
pk
526def8fd1 Add a function to retrieve the size of the on-chip NVRAM area. 2000-11-11 11:03:31 +00:00
augustss
6836c0bd28 Update frlengths after a isoc transfer. 
Suggested by Yuri <yuri@tsoft.com>
 2000-11-10 14:11:49 +00:00
augustss
1bfab105b0 Don't try to set CM_OVER_DATA feature if features cannot be set. 
From Ryutaroh MATSUMOTO <ryutaroh@ss.titech.ac.jp> in PR # 11428.
 2000-11-10 14:08:32 +00:00
augustss
0510b1739c Update documentation link. From OpenBSD. 2000-11-10 13:53:23 +00:00
augustss
9a10107274 Some OpenBSD defines. From aaron@monkey.org 2000-11-10 13:52:28 +00:00
enami
da071ce468 Remove lonely splx in fw_detach. 2000-11-10 03:45:09 +00:00
hubertf
a7398324e3 Regen for ELSA WaveLan IDs 2000-11-10 01:03:29 +00:00
hubertf
e00d559554 Add ELSA WaveLAN card & a noname clone(?) 2000-11-10 01:02:32 +00:00
ad
c8c52e320a Match controllers hiding behind a Symbios 53c1510; thanks to Jonathan Lemon 
<jlemon@flugsvamp.com> for providing clarification.
 2000-11-09 18:19:40 +00:00
itojun
611c77c7df unused variable 2000-11-09 17:20:24 +00:00
ad
01dc7ef4f3 TODO 2000-11-09 15:04:55 +00:00
ad
0129c52c7d - A few minor changes (typos and the like). 
- Use SPLs in iop_msg_send() and not the interrupt mask - it accesses
  shared resources lower down.
 2000-11-09 12:51:36 +00:00
ad
9a41c41bed Install only headers that are useful to userspace (ioctl interface is not 
finished, but will be here soon).
 2000-11-09 12:34:05 +00:00
eeh
71b0c155a0 Support for MI console magic framework. 2000-11-08 23:41:42 +00:00
eeh
faa5920bd2 Use the MI console magic sequence framework. 2000-11-08 23:13:03 +00:00
ad
45b672fb47 Add iop, iopsp. 2000-11-08 19:56:20 +00:00
ad
5854b30016 Add glue for iop. 2000-11-08 19:46:27 +00:00
ad
3785a081f1 Recurse into i2o/. 2000-11-08 19:45:49 +00:00
ad
d49fd13524 Add support for I2O adapters and SCSI/FC-AL/BSA class devices. This needs 
more testing with different configurations, and work in a number of areas
(which I'm not able to do for a little while), but is at least functional
and stable on i386 with DPT adapters.
 2000-11-08 19:45:30 +00:00
matt
918971bc20 Initial import of some of the definitions for the Serial Bus Protocol V2. 
Which is used for SCSI over IEEE1394.
 2000-11-08 19:27:08 +00:00
ad
891c4efd74 - Pull in some updates from FreeBSD - mainly clarifications. Thanks to 
Mike Smith <msmith@freebsd.org> for pointing these out.
- Ensure that we get AENs: reserve one CCB/command block for parameter
  retrieval, and chain AEN retrievals that are the result of an interrupt.
 2000-11-08 19:23:50 +00:00
ad
142ab5b1ec Move lsu stuff to more logical locations, and push queueing into the lsu 
driver.
 2000-11-08 19:20:33 +00:00
matt
d0c3ebd9d8 Make the test for dmareg >= 0x10000 quirked on IDE_16BIT_IOSPACE 2000-11-08 18:22:27 +00:00
wrstuden
88cbfbe36d Move guts of pciide_print_modes() to wdc_print_modes() so that non-pciide 
wdc drivers (like macppc's obio IDE interface) can use it. Also add
support to both wd attach line and to wdc_print_modes() to print
Ultra/{33,66,100} for respective UDMA modes (From Manuel Bouyer).
 2000-11-08 17:57:36 +00:00
thorpej
d764c4d540 One more fix to multicast hash computation. Submitter confirms that 
with this fix, multicast does indeed work properly on the EPIC.

From Zdenek Salvet <salvet@ics.muni.cz>.
 2000-11-08 15:20:29 +00:00
onoe
5b19fc8512 Add powerhook and shutdownhook to support Notebook. 
Use PAGE_SIZE instead of OHCI_PAGE_SIZE for each DMA mem.
	OHCI_PAGE_SIZE(2kB) will be round up PAGE_SIZE, anyway.
	XXX: need more sophisticated way to manage buffer.
Clear IntEvent first not to lose SelfIDCompleted in multiple bus reset.
Be careful not to clear BusReset int event in SelfID duration to follow
the OHCI spec.
Initiate BusReset if selfid is not completed within 3sec after busreset.
 2000-11-08 06:00:18 +00:00
matt
d522d7acc9 Add fwlynx & fwnode. 2000-11-07 18:45:46 +00:00
tsutsui
b666be4488 Add more names: 
MI:       hifn, intersil7170, neo, siop_common, sysmon_envsys, sysmon_wdog
i386:     mca
newsmips: dmac, spifi, xafb
 2000-11-07 15:33:53 +00:00
soren
232e2c5ef9 Regen. 2000-11-07 13:53:59 +00:00
soren
0dc9fd53b9 Just print 'Intel' for their other OUI. 2000-11-07 13:53:42 +00:00
augustss
5a356af882 Regen. 2000-11-06 22:32:49 +00:00
augustss
75367f830a Add some OUIs and models. From OpenBSD. 2000-11-06 22:32:26 +00:00
onoe
5d7a16ff8c make it compilable with FW_DEBUG 2000-11-05 23:04:00 +00:00
chs
b6b3ee8657 remove what looks to be a bit of leftover debug code. 2000-11-05 23:00:10 +00:00
chs
1c76b8d14d fix types in debug code. 2000-11-05 22:59:27 +00:00
matt
f0bd09f42d Merge in my some of my stuff. 2000-11-05 22:35:56 +00:00
matt
43ff857e29 Don't allow use of mapreg is they are at or above 0x10000 in I/O space. (in 
other words, if the address uses bits in the top 16 bits, don't use it).
 2000-11-05 21:14:59 +00:00
mhitch
d458239a94 When doing the cacheflush for MIPS1, adjust the length to account for 
an unaligned buffer.  The last word of the buffer was not getting flushed
if the buffer was unaligned and fit in a single DMA segment.  Now dump(8)
works on both MIPS1 and MIPS3 DECstations.
 2000-11-05 21:02:13 +00:00
jdolecek
0f1770e08d make compilable without FW_DEBUG 2000-11-05 19:43:32 +00:00
onoe
e83458422f First Prototype implementation of network interface part for IEEE1394 (if_fw). 
Current status:
	Only OHCI chip is supported (fwohci).
	ping (IPv4) works with Sony's implementation (SmartConnect) on Win98.
	sometimes works but not stable.
Not implemented yet:
	IRM (Isochronous Resource Manager) functionality.
	Link layer fragmentation.
	Topology map.
More to do:
	clean ups
	MCAP
	charactor device part
	dhcp

There is no entry in GENERIC config file yet.
Follow sys/dev/ieee1394/IMPLEMENTATION to enable if_fw.
 2000-11-05 17:17:12 +00:00
thorpej
1363813e0d Two things off the TODO list. 2000-11-05 16:44:08 +00:00
thorpej
cde4f7415c Add mmap support (i386-specific for the moment). 2000-11-05 16:24:45 +00:00
thorpej
5a8a59d459 Weed out the Dell and HP versions which are known to work in 
WSS emulation mode (i.e. won't work in AC'97 mode).
 2000-11-05 16:13:17 +00:00
thorpej
70b3814a53 Add NeoMagic 256 audio. 2000-11-05 06:46:03 +00:00
thorpej
f945fc008d Driver for NeoMagic 256 audio. Based on the OpenBSD driver, which is 
in turn based on the FreeBSD driver, ported to NetBSD and somewhat
modified by me.  Thanks to Matt Thomas for testing.
 2000-11-05 06:43:45 +00:00
thorpej
aac73109ae Feh, fix st00p1d braino in last. 2000-11-05 05:41:25 +00:00
thorpej
fce3c3a6a8 pcweasel carries the sysmon_wdog attribute. 2000-11-05 04:07:30 +00:00
thorpej
8e0eb1dc12 viaenv carries the sysmon_envsys attribute. 2000-11-05 04:06:53 +00:00
thorpej
e67f5e66bc Split the envsys and watchdog parts of sysmon into their own 
files.
 2000-11-05 04:06:13 +00:00
scw
3b5fce6c46 Invert the sense of i82586_init()'s return value so that 
it matches what ether_ioctl() expects.
 2000-11-04 19:48:38 +00:00
thorpej
95b9ab0ebc Add a device driver for the Middle Digital, Inc. PC-Weasel serial 
console board.  This glues into the `pcdisplay' driver and provides
support for the watchdog timer function on the PC-Weasel.
 2000-11-04 18:47:20 +00:00
thorpej
7575e3d5e9 Update comment regarding watchdog timer toggle. 2000-11-04 18:44:28 +00:00
thorpej
c48d521bdb Add a watchog timer framework to the system monitor. 2000-11-04 18:37:19 +00:00
veego
232ac6b3d1 Print the vendor and chip id in the DPRINTF with 0x%x and not just %d. 2000-11-04 18:28:19 +00:00
thorpej
f3c38af11b Regen. 2000-11-04 16:43:14 +00:00
thorpej
601bcf9813 Add a couple NeoMagic products. From OpenBSD. 2000-11-04 16:41:57 +00:00
augustss
f3030960da Add quirks for a Fuji camera. 2000-11-04 15:54:36 +00:00
thorpej
05d5f37522 Shadow the AC'97 codec registers. This adds two capabilities: 
* support devices that crash when reading the codec registers; a flags
  interface is added to the host interface and one flag is defined
  (AC97_HOST_DONT_READ).
* new API (restore_ports) for restoring the user's settings.  This
  can be useful after an APM resume after a suspend to disk.

From OpenBSD.
 2000-11-04 08:07:14 +00:00
thorpej
0bb6525f5b Add some more codec IDs. From OpenBSD. 2000-11-04 05:45:57 +00:00
ad
96d994ecae regen. 2000-11-03 16:31:51 +00:00
ad
10885fbd47 Oops 2000-11-03 16:31:01 +00:00
ad
62d4f894dc Regen. 2000-11-03 15:57:33 +00:00
ad
3789452cb3 Pequr Technology is now called ServerWorks. 2000-11-03 15:54:02 +00:00
pk
8ba559d056 st_touch_tape(): Pass XS_CTL_SILENT to st_mode_select(). 2000-11-03 12:08:41 +00:00
pk
4c7351ec7d * st_touch_tape(): start probing at the block size from the sense data if 
we have it.

* st_unmount(): reset density to the device default. This prevents using
  stale density values after changing to a medium with different density.

  Section 9.3.3 of the SCSI specs states that a device shall return the
  density value specified in the last succesfull MODE SELECT after an
  unload operation, in case it is not able to automatically determine
  the density of the new medium.
 2000-11-03 10:46:18 +00:00
pk
e3aaa6c1ab * Per st(4), retrieving status and setting modes on the control device 
should succeed even if no media is loaded.

* In stopen(), check the return value of st_mount_tape().
 2000-11-03 10:22:02 +00:00
toddpw
d3ca42abf0 Add support for Socket Comm. PC Card Ethernet, and tidy up naming. 2000-11-03 09:07:24 +00:00
tsutsui
39355e9743 Make this compilie with LANCE_REVC_BUG. 2000-11-03 06:21:32 +00:00
tsutsui
d952450835 Wrap function declaration with "#ifndef sun3/#endif" 
because sun3 does not have bus_space(9) support and
it have not switched to MI intersil7170 driver.

XXX We should split this into intersil7170{reg,var}.h ?
 2000-11-03 05:23:07 +00:00
augustss
9702e75aa1 Sync with FreeBSD: Add a scanner. Fix a pasto. 2000-11-03 04:00:15 +00:00
bjh21
930c4cf062 First attempt at multicast stuff. I suspect it doesn't work. 
Use ether_ioctl -- saves 300 bytes of text.
 2000-11-03 00:25:36 +00:00
bjh21
42e564ed45 Remove unnecessary includes. 
Add a compiled-in RCSID.
 2000-11-02 21:56:46 +00:00
bjh21
13234acd0f Convert to using ether_ioctl(). 
G/C huge swathes of unused code and outdated comments.
 2000-11-02 21:42:41 +00:00
mhitch
f5f7066fc8 When a read DMA transfer is interrupted by a disconnect on the IOASIC SCSI 
and the buffer is not 8-byte aligned, it leaves a partial transfer in the
SDRx registers.  This could cause data corruption in dump(8) because the
read-ahead buffers are allocated on a non-aligned address.  When the read
DMA transfer is interrupted and the current DMA position is not aligned,
call the dma_end() routine to flush the SDRx register contents to the
buffer.
 2000-11-02 21:00:04 +00:00
thorpej
b2429742a5 Print out product info on attach. 2000-11-02 18:55:46 +00:00
pk
f71476a62f Introduce ST_Q_ERASE_NOIMM, a quirk indicating that the device rejects 
an ERASE command with the `Immed' bit on.

Use it on the VIPER 21247 & 21531.
 2000-11-02 13:34:59 +00:00
pk
e4958f1fe6 Prevent printing sense information twice. 2000-11-02 13:12:58 +00:00
msaitoh
5bf3b4ba22 regen 2000-11-02 07:16:16 +00:00
msaitoh
24429db457 add support: 
MELCO		LPC2-TX
	Telecom Device	TCD-HPC100
	MACNICA		ME1-JEIDA
 2000-11-02 07:15:43 +00:00
msaitoh
41cfcbebb0 Fix two bugs. 
- Doesn't fail ne_pcmcia_attach() if ne_pcmcia_ax88190_set_iobase() failed.

- Check whether LIOBASE register is writable or not (dirty hack!).
  Fix PR. 11285
 2000-11-02 07:04:46 +00:00
pk
9c058471c3 Remove useless check for SDEV_MEDIA_LOADED from st_read_block_limits(). 
This command should work whether or not media is present in the device.
 2000-11-02 00:56:59 +00:00
pk
3867a66a9a * In st_touch_tape(), don't bail out if the MODE SELECT fails since we are, 
after all, probing the device for acceptable parameters.

* In st_loadquirks(), copy mode-specific quirks from the quirk table
  to `st_softc'; otherwise all such quirks save ST_Q_FORCE_BLKSIZE are ignored.
 2000-11-02 00:52:15 +00:00
eeh
507aaec04c Adapt to the new line discipline scheme. 2000-11-02 00:01:44 +00:00
eeh
9350b8913d Adapt to new line discipline scheme. 2000-11-01 23:57:14 +00:00
eeh
2a860a3de9 Adapt to the new line discipline scheme. 2000-11-01 23:54:57 +00:00
eeh
55fd5a2fb0 Pass along the bus frequency too, for devices that need it. 2000-11-01 06:18:45 +00:00
eeh
34ed153955 Fix warning in a debug printf. 2000-11-01 06:17:32 +00:00
pk
f5ba0a3942 fb_is_console(): we must match on the `fb' propery in a V0 PROMs root node 
only after establishing that the PROM output device is a frame buffer device.
 2000-10-31 21:54:35 +00:00
simonb
97e5badeae Line up columns in #define list. 2000-10-31 15:16:26 +00:00
eeh
f9a51c7b15 Clean up a #define that doesn't belong. Oops. That's what I get for 
working this late.
 2000-10-31 08:06:14 +00:00
eeh
37486bb837 Get the bpp driver to work properly. 2000-10-31 06:32:06 +00:00
mjl
a7fcd8b686 Fix hanging token ring when data size is multiple of 514, using 
patch in PR/11316 by YAMAMOTO Takashi.
This fixes random hangs I experienced, and probably also
remedies PR/11300 and PR/9321.
 2000-10-31 01:22:08 +00:00
wiz
55b8e84db5 Delete more files before import. 2000-10-28 14:51:08 +00:00
wiz
d91eb6a0c3 Replace remaining vm_offset_t's in NetBSD code by vaddr_t; remove now 
unnecessary casts added by thorpej in 1.11 of bktr_core.c. Strike one
from the TODO list.
 2000-10-28 14:50:27 +00:00
wiz
134608261c Merge 2.17 changes to trunk. 2000-10-28 14:31:57 +00:00
wiz
9732164f76 Import release 2.17 of the bktr driver. 
Changes: Integration of some NetBSD changes. (FreeBSD version now is also
usable as a KLD (~= LKM).)
 2000-10-28 14:17:40 +00:00
tsutsui
d214b09b47 Increase initial Tx drain threshold to 512 bytes. 
My macppc complains about transmit FIFO underrun every time.
 2000-10-28 08:36:57 +00:00
thorpej
4295299769 Regen. 2000-10-27 22:43:44 +00:00
thorpej
86342bb610 Add a bunch of Intel PCI chipsets. From OpenBSD. 2000-10-27 22:43:28 +00:00
thorpej
1b15310aaa Regen. 2000-10-27 17:37:02 +00:00
thorpej
24cba36ced Add a bunch of Pequr (ServerWorks) products. From OpenBSD. 2000-10-27 17:36:44 +00:00
nisimura
8a54846748 Fix errors in initializing the software copy of 256 entry colormap 
stored in device softc.  rasops_cmap[] array is orginazed in 256
iteration of 3 byte long RBG triplet, which does not match with
struct wsdisplay_cmap design.
 2000-10-27 07:24:04 +00:00
ad
528e314143 Work around a fatal firmware bug on some boards. From msmith@freebsd.org. 2000-10-26 14:43:50 +00:00
haya
a4df364077 METHOD CHANGE: Use CIS_FUNCE data which is decoded by pcmcia_cis.c, 
instead of decode cis tuple by itself.  This change leads to suppress
one power-cycling.
 2000-10-25 09:32:11 +00:00
haya
b44679b7ec Bugfix: reset 16-bit pcmcia in chip initialisation sequence. 2000-10-25 09:15:58 +00:00
augustss
a675063a0d Add a hack to try and figure out if the TI UTUSB41 hub is bus powered 
despite claiming to be self powered (it's important to know so that the
power budget can be met).
 2000-10-24 15:01:26 +00:00
augustss
372ae0a636 The all time favourite hub, TI UTUSB41, doesn't report power right. :( 2000-10-24 14:57:35 +00:00
augustss
5cc8d65338 Adda quirk for hubs that do not report bus powered status in a normal way. 2000-10-24 14:56:09 +00:00
augustss
94e36acb29 Tell usbd_set_config_no() to be verbose. It's nice to know whyit fails. 2000-10-24 14:53:59 +00:00
augustss
71fc3f6ee2 Regen. 2000-10-24 14:51:51 +00:00
augustss
963138bceb Add Apple's cool new mouse. 2000-10-24 14:51:24 +00:00
explorer
7817cc2ba7 another Ricochet quirk, this time a well-known one. No device strings are provided from it. 2000-10-24 03:59:16 +00:00
bouyer
fc92601259 Fixes related to QUEUE FULL status: 
- move status handling in siop_scsicmd_end(), it's better than in siop_intr()
- define 2 internal SIOP status, for "no status reported by device" and
  reset condition
- add a list of "urgent" command, to be executed before the list of command
  queued the normal way; this is used for command which got aborted
  by a QUEUE FULL and have to be requeued in order.
- Don't accept to send a Q_TAG message not immediatly folowing a IDENTIFY
 2000-10-23 23:18:10 +00:00
bouyer
cce4838c1f Add ram size to struct properties, and pass it to the bus independant part. 2000-10-23 14:57:23 +00:00
bouyer
7777f61cbe Rearrange for script changes (scheduler core in main script, command part 
of the scheduler in command table).
Add tagged command queuing support.
 2000-10-23 14:56:16 +00:00
bouyer
5113af09e3 Regen 2000-10-23 14:54:50 +00:00
bouyer
7ae5c097e5 Rearrange things a bit to have less jumps 
Install the core of the scheduler in main script (so it's in RAM when there is
one), and avoid jump in the common case. The command part of the scheduler now
lives in host memory, with tables.
Add template for a tag switch.
 2000-10-23 14:53:53 +00:00
bouyer
3b7321e1c0 Allow conditionnal branch like "JUMP foo, IF FALSE" 
The branch will never be taken as is, but the driver can patch the script.
 2000-10-23 14:51:51 +00:00
ad
96562d2d4f Add missing splx() call. 2000-10-23 11:27:52 +00:00
onoe
644aa13a51 Fixed the value of TULIPF_DBO; which was accidentaly shared with the same 
value of TULIPF_BLE.  Pointed out by Enami-san.
 2000-10-23 04:05:21 +00:00
explorer
365f7337ea make ucom into a random source, type TTY 2000-10-22 19:01:44 +00:00
explorer
eb27dda01d Add a new quirk: ASSUME_CM_OVER_DATA. 
Set this on the Metricom Ricochet GS USB modem.

This particular modem breaks if the USB command to enable the feature
CM_OVER_DATA.  Since it appears to wake up in that mode already,
just pretend it is already on, and don't try to set it.

Since this commit is happening over my Ricochet modem, I assume it works
now.
 2000-10-22 08:20:09 +00:00
mjacob
0a481d850d fix SBus bursting *correctly* this time 2000-10-22 03:04:50 +00:00
bouyer
2ebf1a0cd0 Ops, sync the script DMA map when the script RAM *don't* exists. 2000-10-21 13:56:17 +00:00
ad
833dea96d1 - tsleep()/wakeup_one() will hurt when under load, so use a queue instead. 
- Don't copy to or from the aligned buffer unless there's a need to.
 2000-10-20 15:14:25 +00:00
ad
5e0c8a6d51 - ca -> lsu 
- Note twe.
 2000-10-20 11:47:43 +00:00
bouyer
e999ecae48 Support ETHERCAP_VLAN_MTU. Tested on a sparc 2 with: 
le0 at sbus0 slot 0 offset 0xc00000 level 5: address 00:00:3b:86:19:92
le0: 8 receive buffers, 2 transmit buffers
 2000-10-20 09:40:26 +00:00
mrg
0c6aa8d3ed ensure DMA mappings are not mapped streamable. fixes ethernet problems on 
ultrasparc sbus class machines.  from eeh.
 2000-10-20 06:08:02 +00:00
mrg
3af567c485 rework to use bus_dmamem_map() then bus_dmamem_load(), rather than 
bus_dmamem_load_raw() then bus_dmamem_map().

tested on SS2 and SS5 and sbus cards.
 2000-10-20 05:57:50 +00:00
simonb
25f61791dd Only install wsconsio.h, wsdisplay_usl_io.h, wsksymdef.h and wsksymvar.h 
into /usr/include/dev/wscons.
 2000-10-20 05:32:47 +00:00
oster
d349cdf1ef Move disk_busy() and disk_unbusy() to more sane locations. Values 
reported by 'systat iostat' and friends are now much more correct for
RAIDframe devices.  Thanks to Andrew Doran for poking me about this,
and for suggestions on and review of the changes.
 2000-10-20 02:24:45 +00:00
ad
16a062538b Nuke unused includes, sort decls. 2000-10-19 15:31:20 +00:00
ad
e05c79ba66 Regen. 2000-10-19 15:29:14 +00:00
ad
5110b7e58d Add Compaq IEAS. 2000-10-19 15:28:50 +00:00
ad
67fe5fbbb4 Update for lsu; untested. 2000-10-19 14:28:46 +00:00
ad
e9b69699e0 Hook in twe. 2000-10-19 14:24:44 +00:00
ad
9813a10184 Driver for the 3ware Escalade family of RAID controllers. 2000-10-19 14:11:30 +00:00
ad
b3434771a3 El-cheapo disk driver for RAID controllers. If this bugs you, let me know. 2000-10-19 14:06:02 +00:00
nisimura
ad74c7dbd6 - Put comment about wsevent structure counts 0 for the left most mouse 
button with a bit coding improvement.
- signed char -> int to hold integer values.  Contributed 16 insn savings.
 2000-10-19 10:27:04 +00:00
bouyer
d239df5374 Adapt for script change: don't assume Ent_lun_switch_entry == 0 2000-10-19 07:22:06 +00:00
bouyer
8561c00a0a Regen 2000-10-19 07:20:33 +00:00
bouyer
67618a69ae Move restore_scntl3 before the lun switch, to ease freeing of unused lun 
slots.
 2000-10-19 07:20:16 +00:00
thorpej
5247e9db0b Regen. 2000-10-19 05:52:15 +00:00
thorpej
24477b4281 Add the ICS Advent PCI-WDT500/501 watchdog timer boards. 2000-10-19 05:51:34 +00:00
bouyer
f629a0ae67 Ops, add proper bus_dmamap_sync() calls for reselect switch operations. 2000-10-18 20:06:54 +00:00
bouyer
9d3f5d7fbd Adapt for new lun switch script. 
Implement SCBUSACCEL ioctl.
Snapshot of work in progress on tagged queuing: we can send/receive
queue tag messages. Infrastructure to manage multiple commands per
devices not here yet.
 2000-10-18 17:06:52 +00:00
bouyer
b66120e445 Regen 2000-10-18 17:01:46 +00:00
bouyer
75246b83c0 Redo the target/lun sw in a better way, and handle queue tag messages. 2000-10-18 17:01:13 +00:00
bouyer
9836ff3913 Looks like frame size isn't checked; just say we can do VLAN MTU. 
Tested with a SMC9432TX.
 2000-10-18 16:49:13 +00:00
bouyer
8ec46d1679 Fix off by one error when using RETURN, WHEN/IF ... 2000-10-18 16:05:23 +00:00
mjacob
cecccb23b2 quiet chatty boot messages 2000-10-17 17:39:10 +00:00
bouyer
f87b1573c3 Support ETHERCAP_VLAN_MTU by ignoring the EX_UPD_ERROR and EX_UPD_OVERSIZED 
status bits. Tested with a 3c905-TX.
 2000-10-17 16:16:52 +00:00
bouyer
5cc13a273b Support ETHERCAP_VLAN_MTU. It seems the chip doesn't check the frame size. 
Tested with a NetVin 5000 and a WD8013EBT.
 2000-10-17 16:14:42 +00:00
haya
8130f0ec5d Add a cis decoding function which decodes some CISTPL_FUNCE tuples for 
disk and network functions.
 2000-10-17 10:13:46 +00:00
nisimura
8a526d9513 Remove sc_lance_dmam field from ioasic_softc structure. It was obsoluted 
by the removal of ioasic_lance_dma_setup() made in if_le_ioasic.c 1.15.
 2000-10-17 09:45:49 +00:00
nisimura
f3d4ccd750 Have consistent #if's for machine dependent clauses. 2000-10-17 09:27:22 +00:00
nisimura
1fd2521475 - efforts to merge TC Alpha and IOASIC DECstation, derived from Mattias 
Drochner's work made in nisimura-pmax-wscons branch.  Still a little
  to do before useful for DECstation.  MI softintr required.
- allow wildcard matchs to have zstty/zskbd/zsms in default hardware
  configuration.
- abandon to check zs_ioasic_cnattach() return value; it doesn't fail.
- have zs_ioasic_cnattach() serial line parameters hardcoded inside, in
  symmetry with zs_ioasic_lk201_cnattach().
 2000-10-17 08:55:43 +00:00
oster
f9a49b32bf Don't touch a failed component at all. Thanks to Robert Elz (kre) for 
noting the problem and providing additional comments.
 2000-10-17 03:39:41 +00:00
shin
6444136d42 cosmetic change. 2000-10-17 01:50:40 +00:00
thorpej
1da5a95dc5 Oops, wdt_msec is a short, not a char. 2000-10-17 00:34:41 +00:00
thorpej
4b0c3e182c Fix a typo in an constant name that is currently unused. 2000-10-16 23:03:45 +00:00
thorpej
a5e3251d5f Register definitions for the Middle Digital, Inc. PC-Weasel 
serial console board.
 2000-10-16 22:59:24 +00:00
itojun
d01f7f6e2b correct memory size to be mapped. PR 11242. 2000-10-16 10:26:41 +00:00
mjacob
c64069308b Make changes relevant to changes in WWN defaults. 
Also fix egregious bug where we would never decrement
the islocked recursion counter. I guess this means
that we don't recurse on this platform! All of this should
go away when we have real lock primitives to use in drivers.
 2000-10-16 05:18:15 +00:00
mjacob
c7c2783178 Change some of the WWN macros- eliminate PORT_FROM_NODE_WWN and make 
sure we have a DEFAULT_{PORT,NODE}WWN and ISP_{NODE,PORT}WWN macro
as a requirement for all platforms.
 2000-10-16 05:16:56 +00:00
mjacob
ffdbddbd79 Add in commented-out hiwater measurement. 
Remove egregious older bug which had us refusing to log into
fabric devices unless they were NL ports. Whuff.
 2000-10-16 05:15:55 +00:00
mjacob
298ec0ecd9 Clarify/cleanup how node and port names are derived from nvram. Remove 
clause 2 of licence. Remember to print initiator ID (LOGINFO level).
 2000-10-16 05:15:05 +00:00
mjacob
7cc31292b3 Turn on 32 byte bursting for ISP 2000-10-16 05:13:13 +00:00
mjacob
3607efd3d7 Remember to establish default PORT WWN. Add in some LOGDEBUG2 messages 
for the dma mapping code.
 2000-10-16 05:12:26 +00:00
mjacob
8ddb5fd594 roll SBus f/w to latest released level (1.37) 2000-10-16 05:10:37 +00:00
thorpej
4318834442 Don't trim off the FCS, pass it up. 2000-10-15 19:56:31 +00:00
explorer
b4bbac9584 add Ricochet GS USB modem 2000-10-15 17:53:17 +00:00
bjh21
83666f01fa Shuffle printfs around so they look right when we've got a drive attached. 2000-10-14 23:45:57 +00:00
matt
b885772956 The input packet has the FCS attached to set M_HASFCS before passing up. 
Revove eh = ... since it's no longer used.
 2000-10-14 20:06:02 +00:00
nisimura
ca7bd5f302 Make sure wsmouseopen() returns ENXIO when no VSXXX mouse is attached. 2000-10-14 08:51:51 +00:00
simonb
c8d4a6140c Regen 2000-10-14 06:23:21 +00:00
simonb
30dbba4dd1 Add ATI Mobility M3 (both PCI and AGP). 2000-10-14 06:12:46 +00:00
jonathan
6e67f82712 Fix wi_intr() to avoid touching card registers during insert/remove events, 
when sharing an interrupt with other devices:
check sc->sc_enabled,  and drop the interrupt if its' off.

Also check for IFF_RUNNING, on advice of Enami Tsugotomo.
 2000-10-13 19:15:08 +00:00
augustss
86974d7235 Regen. 2000-10-13 18:16:53 +00:00
augustss
67c8e3701d A bunch of scanners. 2000-10-13 18:16:36 +00:00
augustss
764c5e3eea Recognize HP 5300C. 2000-10-13 16:18:48 +00:00
augustss
8abfde6138 Regen. 2000-10-13 16:18:22 +00:00
augustss
54480a36e4 Add HP 5300C. 2000-10-13 16:18:02 +00:00
mjl
2898929f94 Revert previous since the finnish keymap is already present under 
the name "sv". Note to myself: Read PRs completely before acting.
Note to Santa Claus: I want a mailing list that carries all follow
ups to PRs!
 2000-10-13 12:53:23 +00:00
augustss
b5b3e28ce7 Add uscanner. 2000-10-13 12:31:10 +00:00
augustss
3a05d9ba7b Avoid empty strings for vendor&product. 2000-10-12 23:11:04 +00:00
augustss
4ed4915295 Regen. 2000-10-12 22:51:42 +00:00
augustss
0b0fb8e466 Add Kingston KNU101TX Ethernet adapter. 2000-10-12 22:51:20 +00:00
wiz
06ab77c680 typo fix in comment (stallen -> stolen) 2000-10-12 12:42:52 +00:00