2ffb54bdcc
Split the AD1848 driver into MI (dev/ic/ad1848.c) and ISA parts.
1998-08-25 22:34:29 +00:00
a48f7d8a24
Attach the OPL FM synth to the ESS driver.
...
It probes, but alas, no sound.
1998-08-25 12:52:47 +00:00
daa8ad1747
Add some braces to make egcs happy.
1998-08-25 04:56:01 +00:00
85c6c03e2a
Change the 32-bit fields of the RFA to an arrays of bytes, so that
...
egcs won't attempt to optimize inline copies of them into a single
load/store (the RFA is not 4-byte aligned in the DMA area).
Just use memcpy() to copy those fields, now, not our own home-grown.
1998-08-25 01:08:15 +00:00
4e7c07c2b4
Write MIDI data from the sequencer to the device in a more sane way.
1998-08-24 17:59:25 +00:00
ea3bfd6d80
Fix bug in transmit logic that would transmits to stop. Boolean dyslexia
...
stricks again.
1998-08-24 14:09:15 +00:00
54bf4389f9
egcs brace warning
1998-08-24 02:34:44 +00:00
7734e0ef29
fix version string (from PC Card Standard, April 1998 (Release 6.1))
1998-08-22 23:41:48 +00:00
c7e036f6e2
Let opl attach to ess.
...
WARNING: it doesn't work yet.
1998-08-22 22:55:09 +00:00
f2ff59edc5
Change debug output.
1998-08-22 22:54:11 +00:00
369bc4cb89
Allocate an I/O according to the config table entries.
...
Auto assign is done only when all cfe->iospace[0].start fails.
1998-08-22 17:47:58 +00:00
9d4112bf21
make struct xd_iocmd's block member an u_int not a u_long
1998-08-22 15:11:02 +00:00
4d4f129eaa
make "struct sun_dkpart" the same for sparc/sparc64 (sparc64 must have been broken?)
1998-08-22 14:55:28 +00:00
bc7c6c0c4c
Fix DVMA address handling.
1998-08-22 11:47:45 +00:00
ef6b13cc87
vm_offset_t => vaddr_t.
1998-08-21 14:13:47 +00:00
ff2c3adddc
Add some braces to stop the new egcs warnings.
1998-08-20 19:55:06 +00:00
5ad46000df
Remove vestiges of sparc-specific interrupt handling.
1998-08-20 11:44:58 +00:00
177621555f
remove sparc hack: there's a bus.h now.
1998-08-20 11:42:55 +00:00
1f007a13cc
Cast bus_size_t to u_long in printf() args.
1998-08-20 11:42:13 +00:00
a6ed1cdd4e
Provide a workaround for people who want a sequencer but have no MIDI devices.
1998-08-20 10:59:09 +00:00
915f1fe566
Add missing __P
1998-08-20 10:46:10 +00:00
96aa1cec21
Add ofisa attachment for the ISA joystick driver.
...
XXX currently arm32-specific.
1998-08-20 07:02:32 +00:00
5ae808b38d
ss->special could be NULL, so sane would crash the kernel.
1998-08-19 08:40:31 +00:00
8021b2ae29
Initial support for the Brooktree Bt463 RAMDAC.
1998-08-18 23:29:28 +00:00
ff266f0937
Add some braces to make egcs happy.
1998-08-18 18:23:07 +00:00
1083dcb6ca
Back out previous.
1998-08-18 18:16:30 +00:00
0e6f209f9d
Add forgotten OPL file.
1998-08-18 17:56:39 +00:00
ee26f0775b
This now needs <dev/midi_if.h> to build.
1998-08-18 17:55:09 +00:00
813dfd31c5
Fix a couple of obvious bugs in the hardware cursor handling code, and
...
use the RAMDAC callbacks to get/set the cursor colormap.
1998-08-18 08:40:39 +00:00
6ba7f2f6fd
Need an entry point to check cursor colormap entries for validity
...
before actually setting them.
1998-08-18 08:23:46 +00:00
3db6850bb7
When updating the cursor colormap, actually store the data in our
...
copy of the cursor colormap, not the regular colormap!
1998-08-18 08:22:49 +00:00
feaf75c755
Add set_curcmap and get_curcmap RAMDAC methods, for use by the TGA hardware
...
cursor code. These are unneeded on the Bt485, since the RAMDAC handles
the hardware cursor. They are needed for the Bt463, however, since the
RAMDAC only provides cursor color.
1998-08-18 08:07:45 +00:00
082116a927
vm_offset_t -> vaddr_t
1998-08-18 08:00:17 +00:00
b43fc64da6
Registers for the Brooktree Bt463 RAMDAC.
1998-08-18 07:43:09 +00:00
73d1752963
Deal with somewhat bogus uninitialized warning in new egcs. Behavior
...
is such that would inidicate that __attribute__((__noreturn__)) is not
being honored.
1998-08-18 06:16:45 +00:00
6bfd748b46
First-crack at RoadRunner (3c574-TX 10/100Mbps PCMCIA). Doens't yet use
...
any of the RoadRunner speed hacks.
1998-08-17 23:20:39 +00:00
93d3ff20b4
Regen.
1998-08-17 23:12:15 +00:00
d2f5e92d0a
Add product ID for the 3Com 3c574-TX 10/100Mbps Ethernet, provided
...
by Laine Stump.
1998-08-17 23:10:12 +00:00
cd09067eb4
* Redo the way the way the MIDI driver attaches to audio devices.
...
* Improve the midisyn layer a little.
* Add a driver for the Yamaha OPL[23] FM synths.
The opl driver is not finished yet; it sounds pretty awful.
For some strange reason I cannot get any FM sound from my SB64 cards,
but a regular SB16 works fine.
1998-08-17 21:16:09 +00:00
d0a17ab63e
Fix a typo.
1998-08-17 20:34:19 +00:00
a2cad65f4e
Only mark the disk dirty if we write.
1998-08-17 19:30:38 +00:00
fdb344b38f
- use sc_tlphycap with bitmasks instead of direct comparaison (needed now
...
that we may have (TLPHY_MEDIA_10_x | TLPHY_MEDIA_NO_10_T).
- add carrier detect for AUI/BNC.
This now works properly with a "Compaq Netelligent 10/100 TX" and a
"Compaq ProLiant Integrated Netelligent 10/100 TX", untested with others
(but should work as well).
1998-08-17 16:41:45 +00:00
dbdebe9c17
Reduce com_devs[] to those devices (one!) that we need to match by CIS
...
string comparison. Change com_dev_match() somewhat to reflect that.
1998-08-17 03:28:51 +00:00
04f0dc658c
Assign my copyrights to TNF.
1998-08-17 00:49:01 +00:00
a1ac68819f
Assign my copyrights to TNF.
1998-08-17 00:26:32 +00:00
2a5371253c
splnet() is not appropriate for everyone. Raise and lower SPL via
...
macros defined in pdqvar.h
1998-08-16 03:44:42 +00:00
cbcc3cfa46
Oops, back out something that I didn't intend to commit.
1998-08-16 01:16:57 +00:00
5e177fa975
Regen.
1998-08-15 21:37:24 +00:00
ca15ee6ef6
Consolidate the Socket products, pointed out by Nathan Williams.
1998-08-15 21:36:25 +00:00
05eabf2eef
Regen.
1998-08-15 21:29:24 +00:00
0ac0bf4615
Oops, that Socket Communications vendor ID was redundant. Sort the vendors
...
so I won't make that mistake again.
1998-08-15 21:28:26 +00:00
1c7ae25125
Sigh, #if 0 the SMC 8020BT EtherEZ entry until we know what the product
...
ID really is.
1998-08-15 20:47:32 +00:00
fec04bbde8
Regen.
1998-08-15 20:46:31 +00:00
f2a088f77c
Oops, that SMC product ID is actually for the 8016 EtherCard. *sigh*
1998-08-15 20:46:06 +00:00
066e235e19
Take a stab at supporting the SMC 8020BT EtherEZ. (Similar to the
...
Megahertz; Ethernet address is stored in third CIS info string, but
may also be in the FUNCE/LANNID tuple.)
1998-08-15 20:11:38 +00:00
8954eaede3
Regen.
1998-08-15 20:08:37 +00:00
1bf26fea5a
Add SMC vendor ID, and SMC 8020BT EtherEZ product ID.
1998-08-15 20:08:07 +00:00
ef4e6a52aa
Regen.
1998-08-15 19:27:16 +00:00
20e821491f
Add the Zoom ComStar 33.6 modem, from Dave Huang <khym@bga.com>, PR #5976 .
1998-08-15 19:26:18 +00:00
a68f2398d3
Add the Trust Combo EthernetCard, from Dante Profeta.
1998-08-15 19:00:04 +00:00
b2097ee74d
Regen.
1998-08-15 18:58:32 +00:00
9314c120f7
Add the Trust Combo EthernetCard product ID, from Dante Profeta.
1998-08-15 18:58:05 +00:00
cb7214f1a4
Regen.
1998-08-15 18:56:16 +00:00
81f67879f9
Add vendor ID for Socket Communications, and product ID for the
...
Socket Communcations Dual RS232 card.
1998-08-15 18:55:25 +00:00
d07b3639a4
Assign my copyrights to TNF.
1998-08-15 17:47:15 +00:00
7ce9726a7d
Oops, don't forget to tick the MII once a second.
1998-08-15 17:04:52 +00:00
1bbc572701
Fix typos in last commit.
1998-08-15 16:58:53 +00:00
c2f2b0d431
RoadRunner has a bit in Reset Options that must be set to enable the MII.
...
Define that bit.
1998-08-15 16:50:07 +00:00
53d231dae3
correct indent.
1998-08-15 16:49:33 +00:00
a0aca43d11
Reset Options is in Window 3; correct a comment.
1998-08-15 16:47:30 +00:00
479d8b25bf
The 3c515 (Corkscrew) and 3c574 (RoadRunner) have their Window 1 registers
...
offset! Define an inline function to compute the Window 1 register offset
and use it.
1998-08-15 16:20:51 +00:00
31a3d86b80
Define the Corkscrew chipset - used by the 3c515 ISA 10/100mbps cards.
1998-08-15 16:15:40 +00:00
3ca5e496cc
Fix a brain'o that caused the 3c589 to not match.
1998-08-15 16:09:46 +00:00
305a943ba7
Use scsi style geometry printout
1998-08-15 15:05:22 +00:00
62b1bf3e2e
Assign my copyrights to TNF.
1998-08-15 10:51:16 +00:00
6dc903202f
Assign my copyrights to TNF.
1998-08-15 10:10:47 +00:00
7d0d0346fa
Define the RoadRunner FIFO count registers.
1998-08-15 08:28:22 +00:00
ccf620bfab
Define the 3Com "RoadRunner" chipset; like the Boomerang, but for PCMCIA.
...
No DMA is wired up, it has a shared memory interface, and a FIFO buffer
which can be used to speed up PIO transfers. (The latter two are
PCMCIA-specific speed hacks to deal hide the performance lossage from
using a PCMCIA->PCI bridge internally.)
1998-08-15 07:28:04 +00:00
4c88513d7d
Look up the PCMCIA 3Com products in a table-driven fashion, like the
...
PCI products.
1998-08-15 07:25:15 +00:00
d5b735ae79
In the NewMedia callback, make sure we have a LAN Node ID tuple.
1998-08-15 06:56:12 +00:00
2be6d344ab
Use the symbolic name for the tuple code used to find the Ethernet
...
address.
1998-08-15 06:46:33 +00:00
129cbf95ee
Minor edit.
1998-08-15 05:16:41 +00:00
cc8a78e783
Assign my copyrights to TNF.
1998-08-15 04:42:42 +00:00
b2827b9d36
Assign copyright to TNF.
1998-08-15 04:16:55 +00:00
df9baf2311
Assign copyrights to TNF.
1998-08-15 03:51:30 +00:00
6d3d8a1350
Make copyright notices with my name consistent.
1998-08-15 03:02:31 +00:00
2b869a383f
Use _CS_OFISA_MD_* callbacks for old, broken OpenFirmware builds.
1998-08-15 02:59:01 +00:00
dd769acbfb
Name some constants consistently between drivers.
1998-08-15 02:37:50 +00:00
cc84859459
Map the EISA registers correctly!
1998-08-15 02:30:56 +00:00
196dfd7597
Always map the EISA configuration registers.
1998-08-15 02:26:31 +00:00
e9c5407d64
Only map the amount of space the device actually occupies.
...
Part of PR #5279 , Martin Musemann.
1998-08-15 01:59:25 +00:00
93eb06f9f2
Don't bother with the num_memspace check. It makes some otherwise-working
...
cards (e.g. Xircom CM33) fail needlessly.
From Jan van Doorn <jdoorn@nc.com>, PR #5580 .
1998-08-15 01:41:31 +00:00
582d4a7856
Should not use SCSI_POLL if the system is not cold.
1998-08-15 01:32:55 +00:00
9646d7f100
Add support for the D-Link DE-660. From Tero Kivinen <kivinen@ssh.fi>,
...
PR #5691 .
1998-08-15 01:20:05 +00:00
7ea79f1cb2
Regen.
1998-08-15 01:18:06 +00:00
be8a202a21
Add the D-Link DE-660. From Tero Kivinen <kivinen@ssh.fi>, PR #5691 .
1998-08-15 01:17:51 +00:00
b3b533c44d
Keep track if the disk has had done i/o, making it dirty. On last close,
...
or at shutdown, flush the cache if the disk is still dirty and it support
cache flushing. Fixes PRs #5588 (Jim Bernard) and #5589 (Justin Gibbs).
1998-08-15 01:10:54 +00:00
1f4b4ceda6
Add support for the NewMedia BASICS Ethernet. Device info provided by
...
Stefan Grefen in PR #5902 .
1998-08-14 23:31:22 +00:00
5fa0fd5087
Regen.
1998-08-14 22:59:54 +00:00
924090ec6d
Add vendor ID for NewMedia Corporation, and product ID for NewMedia
...
BASICS Ethernet. From Stefan Grefen, PR 5902.
1998-08-14 22:59:35 +00:00
cea8e0a23f
explicitely select the master before trying to access its registers
1998-08-14 20:39:04 +00:00
a8d0a43ffa
2 changes to pciide_probe_wdc() (used in compatibility mode to check
...
if i drive is responding):
-if the reset succeeds, check some registers to make sure there is really
a drive (and not a chipset which echoes back the last written value)
-explicitely select the master before trying to read the master's status
1998-08-14 20:35:40 +00:00
183442fe73
Emulate ulinear_be using slinear_be on later chips.
1998-08-14 00:49:23 +00:00
ae8bdb1e72
Make sure CIMDIS is set and FLINK is clear in the PCR.
1998-08-14 00:23:26 +00:00
48bf26949f
Report "true" disk geometry; like sd disks do
1998-08-13 18:16:53 +00:00
523a2c670a
Make sure to turn off timeout flag when doing untimeout().
1998-08-13 15:50:57 +00:00
55491ea367
Rototill match algorithim. New scheme:
...
1. Does the function claim to be a serial port?
2. Does the function's configuration table present all four
standard ISA com port ranges?
3. Is the device in our table?
New serial devices do not need to be added to the table unless they
fail both (1) and (2).
1998-08-13 15:08:54 +00:00
a461703d7f
Use PCMCIA_FUNCTION definitions.
...
Initialize function ID in new pcmcia_function structures to
PCMCIA_FUNCTION_UNSPEC, not PCMCIA_FUNCTION_MULTIFUNCTION (0).
1998-08-13 15:03:06 +00:00
5417a1681d
Add PCMCIA_FUNCTION_* macros, for function types defined by
...
PCMCIA_CISTPL_FUNCID.
1998-08-13 15:00:02 +00:00
dd1665ce4b
Fix typo in SYSEX code.
1998-08-13 12:40:20 +00:00
f750a7d47e
device ess was listed twice
1998-08-13 04:53:18 +00:00
a2dd74ed79
Merge paddr_t changes into the main branch.
1998-08-13 02:10:37 +00:00
c987d23146
Remove some leftover fluff.
...
Make sure there is no outstanding timeout when the sequencer is closed.
1998-08-13 00:13:56 +00:00
94e489e277
If the autonegotiation is enabled, the PAR doesn't indicate duplex mode
...
properly! Work around this by determing current active media by taking
the highest-order common bit of our advertised capabilites and the link
partner's.
If the link partner doens't do autonegotiation, then parallel detection will
pick up the media type, which will never be full-duplex, so reading the PAR
is ok in this case.
Bug pointed out by Matthias Drochner, work-around inspired by reading
the dp83840 manual, section 3.9 (IEEE 802.3u auto-negotiation).
1998-08-12 22:41:21 +00:00
d95a6e9dec
Make a variable name reflect a register name.
1998-08-12 22:27:42 +00:00
d4a5a3d0ef
Run the shutdown hook w/ SCSI_AUTOCONF.
1998-08-12 22:15:57 +00:00
58e0098fef
Shut up after close().
1998-08-12 21:36:21 +00:00
391ef355d5
Handle SYSEX messages.
1998-08-12 21:31:28 +00:00
651d704733
Lower buffer size.
1998-08-12 21:29:29 +00:00
981f0cd0d0
If autonegotiation is enabled in the BMSR, and the BMCR doens't claim
...
that it has completed, report "none" as the active media type.
1998-08-12 20:56:34 +00:00
a24f6f77bf
Ugh, don't print out "autonegotiation failed to complete" if it did.
...
We get these once a second if we're in auto mode, the interface is up,
and there's no carrier.
1998-08-12 20:46:47 +00:00
3292aee22b
Separate special character handling from normal output so that they
...
are obeyed even during an escape sequence.
This is how the original VT100 behaves.
1998-08-12 20:09:47 +00:00
8e12b6c020
stricter parameter check for scrolling regions
...
(PR kern/5954 by Dave Huang <khym@bga.com>)
1998-08-12 20:04:12 +00:00
c587bae132
Nit: space -> tab conversion. No functional change.
1998-08-12 19:16:24 +00:00
5c76b6a944
The mic preamp is really a property of the input stage, and affects both
...
pass-through and recording.
1998-08-12 19:13:14 +00:00
a5ace63ee2
Associate the preamp with the mic volume in the input class.
1998-08-12 19:09:55 +00:00
916c60de3e
Oops; fix typos.
1998-08-12 18:55:03 +00:00
b170caf730
Completely rewrite media selection. Add support for the MII/PHY on
...
the 3Com 3c905-TX and 3c905-T4. Fix handling of the MII on the
3c595-MII and 3c597-MII (can't talk to the PHYs on these cards; just
use "manual" for the external MII port).
Fixes kern/4782 (Chris Demetriou).
1998-08-12 18:51:52 +00:00
a2f1d5b822
Add a knob to enable/disable the mic preamp.
1998-08-12 18:47:43 +00:00
fa39959a5e
Add a MIDI driver for the PC speaker. This is mostly of hack value,
...
but, hey, lotsa people got a MIDI device now! (A truly pitiful one. :-)
1998-08-12 18:16:36 +00:00
881b4053a6
Remove some white space.
1998-08-12 18:15:04 +00:00
50ab480a8c
Add a layer to handle emulation of MIDI for synthesizers.
...
It handles decoding of MIDI commands, voice allocation, and translation
it notes to frequencies.
1998-08-12 18:14:01 +00:00
27c5df27d1
Tidy up and rename some functions in the MIDI driver.
1998-08-12 18:11:53 +00:00
5bec554354
Driver for the 3Com internal PHY, found on 3c905B-TX cards (and maybe
...
some 3c905-TX?). Partially from Frank van der Linden.
1998-08-12 08:46:20 +00:00
53907fe5a1
Support Cabletron Ethernet card, from John Marohn in PR 5762.
1998-08-12 07:19:09 +00:00
3979b06d00
enhanced -> preamp
1998-08-12 03:18:34 +00:00
5ad5bb35af
minor change to make the message less linux like
1998-08-12 00:03:23 +00:00
1f5c14d8ef
ess_audio_channel:active is now used even when DIAGNOSTICS is not defined.
1998-08-11 12:16:22 +00:00
a6e73a5576
Actually set all the logical filter bits. Doh!
1998-08-11 05:57:40 +00:00
396881cc5d
Eliminate a potential (but not common) NULL dereference.
1998-08-11 05:47:43 +00:00
271d3df6f3
Fix an obvious bug that caused the multicast filter to always be all 0s.
1998-08-11 04:18:25 +00:00
9b46e98b21
Adapt to attribute name change. Also, deal with 3Com PHYs that report
...
0/0 as their oui/model IDs.
1998-08-11 00:41:44 +00:00
7b8168e675
Adapt to new MII code.
1998-08-11 00:12:52 +00:00
d812ed6db7
G/c the 83840 register definitions.
1998-08-11 00:12:20 +00:00
1301693108
Adapt to new MII code.
1998-08-11 00:11:39 +00:00
b1fb3ecb0f
Adapt to the new MII code. This required splitting some structures into
...
if_tlvar.h, since the ThunderLAN PHY driver needs to know some things
about it's parent (and since it can only attach to a ThunderLAN chip,
this is the easiest way).
1998-08-11 00:09:26 +00:00
36db6106a8
Adapt "tl" driver to the new MII code, and add the "mii" attribute to
...
the "fxp" driver.
1998-08-11 00:08:23 +00:00
f0d19c2ee1
Change the name of the attribute to "mii".
1998-08-11 00:05:36 +00:00
e7643533b6
Adapt to MII layer changes.
1998-08-11 00:03:12 +00:00
e8e237ffc6
Device driver for the Quality Semiconductor QS6612 PHY, found in
...
SMC EtherPower-II cards.
1998-08-11 00:01:03 +00:00
6bae1a0bea
Device driver for the Intel i82555 PHY.
1998-08-11 00:00:28 +00:00
045a100420
Adapt to the new MII layer. This PHY driver now properly supports
...
802.3u autonegotiation, and will report the precise media selected
by autonegotiation by reading PHY-specific registers.
XXX There is still some work to do wrt. autonegotiation and the
BNC/AUI support in the ThunderLAN PHY.
1998-08-10 23:59:58 +00:00
f66f3b1ba9
Adapt to the new MII layer. This PHY driver now properly supports
...
802.3u autonegotiation, and will report the precise media selected
by autonegotiation by reading PHY-specific registers.
1998-08-10 23:58:39 +00:00
ad00a98756
Initial generation.
1998-08-10 23:56:19 +00:00
3f8be46d4d
Near complete rewrite of the MII layer to present an interface compatible
...
with BSDI's MII layer to device drivers.
1998-08-10 23:55:16 +00:00
8ba8e2056b
Remove unused field (sc_ih) in ess_softc (interrupt handlers are kept
...
in a per-direction structure).
1998-08-10 20:24:26 +00:00
b034eb97bf
Fix typo.
1998-08-10 20:02:48 +00:00
345530343a
Responding to an issue brought to my attention- when the device is
...
opened norewind and 2 filemarks are written at the end a phantom file
is left (just what I was afraid of, but I didn't think about it in
the last delta because somehow I had managed to convince myself that
this was a nonissue. It's not.).
So- in stdone clear ST_WRITTEN for regular reads. In st_close, preserve
the state of ST_WRITTEN, and if no error and 2FM@EOD for this device and
this is a no-rewind open, backspace one filemark. This should preserve
(for this mount session) FILE - FMK - FILE - FMK - FILE ... FILE FMK FMK EOD
sequencing.
This doesn't clean up the case of EOM appends- in this case you *will* still
get (after an MTEOM operation and a write of a file) a phantom empty file,
e.g. FILE - FMK FMK - FILE - FMK FMK EOD *unless* you follow the EOM operation
with an explicit backspace. The trouble is that this makes it difficult for
seamless interchange with other systems which don't necessarily follow.
The preferrable alternative would be to eliminate the 2FM@EOD except for
1/2" Reel tapes, but that has been pretty much nixed within developers.
1998-08-10 16:56:25 +00:00
7fca135b1b
Use the new trigger interface.
1998-08-10 15:32:18 +00:00
2ff84b0fe4
Kickoff xmit interrupts, needed on chip DC7201.
1998-08-10 14:41:16 +00:00
920e7c7d5d
Fix a race involving determination of pollmode. This is not known to be
...
associated with any observed lossage...it was just noticed while reading
ncr_start().
g/c some now-unreachable code produced by the earlier race condition fix.
1998-08-10 13:10:33 +00:00
060f81eb62
Minor change.
1998-08-10 02:19:18 +00:00
93703857ca
Slow down, Wilbur.
1998-08-10 02:13:44 +00:00
7514d511f7
Fix a typo I introduced in the MIDI code.
1998-08-10 02:12:30 +00:00
1c6dea16fa
For consistency, only do the rate coupling in full-duplex mode.
1998-08-10 01:27:34 +00:00
8d77cae1b4
For models prior to the SB16, there is only one clock divider, so couple the
...
sample rates. However, only do this if both play and record are being used
simultaneously; otherwise we can't play 22KHz on the SB1.
1998-08-10 01:25:33 +00:00
20ec08b84e
Oops.
1998-08-10 01:17:33 +00:00
10148394d2
Call set_params if usemode changes.
1998-08-10 01:13:20 +00:00
3dcff6581b
Use the new trigger_{in,out}put interface.
...
Also, even on the SB1, we can leave the DMA controller in auto-initalize
mode and just send a command to the board for each block. This may help
prevent FIFO underruns.
1998-08-10 00:20:39 +00:00
cf7abcbe64
Minor cleanup to debugging cruft.
1998-08-09 22:11:48 +00:00
592b1dd587
But seriously...
1998-08-09 21:41:45 +00:00
a85ed63924
Oops; the previous was wrong on little-endian machines.
1998-08-09 21:35:03 +00:00
4ffebebb25
Several things:
...
* Use the new trigger_{in,out}put interface.
* Allow the play and record channels to have different encodings (but the
same sample rate).
* Play u-law and a-law as 16-bit data. (This may not work yet...)
1998-08-09 20:32:34 +00:00
17431823fb
Add trigger_output and trigger_input entry points, which replace
...
init_{in,out}put and start_{in,out}put, and are only called once.
1998-08-09 20:28:07 +00:00
8cbcfa0df2
Add mulaw_to_slinear16 and alaw_to_slinear16.
1998-08-09 19:22:15 +00:00
b1bb9aa490
Oops. We do still need to set t_dev in the first open part of zsopen,
...
so we get ttyXX vs cuaXX right. Leave the initialization in attach.
1998-08-09 18:36:45 +00:00
a2fc689833
Make sure output is thoroughly halted on close, and remember that we stopped
...
it.
1998-08-09 07:25:58 +00:00
b4e0bf5dfb
Use 4- and 8-byte DMA transfers.
1998-08-09 06:52:57 +00:00
0611fc34f8
Don't actually touch the hardware in set_params; defer that until we actually
...
start a transfer. Instead, just check that the parameters are valid.
Also, use 16-bit output for u-law and a-law.
1998-08-09 06:38:30 +00:00
26e55969e4
Initialize the struct tty's t_dev field at attach rather than first open.
...
The attach routine calls zsparam if we're setting up the console, and
zsparam needs this field to tell which zstty to set up. Otherwise, we
set up zstty0 even if it's not the console!
1998-08-09 06:17:07 +00:00
9bedf069cd
Mask off extra usemode bits.
1998-08-09 05:44:51 +00:00
5eba82397c
Oops; fix typo.
1998-08-09 04:59:55 +00:00
017b9af5fe
Clarify with a specific reference to the manual page in question.
1998-08-09 04:58:08 +00:00
b3853549b3
Always copy back both the record and play parameters, in case the driver had
...
to change one behind our back.
1998-08-09 04:54:44 +00:00
12f5a41e1f
Make the previous slightly more robust, and set AUDIO_PROP_INDEPENDENT.
1998-08-09 04:40:55 +00:00
c8532af3b2
Make sure the sample rate is the same on both channels, tracking the change
...
from one channel to the other if only one is active.
1998-08-09 04:14:47 +00:00
759ca5ee0c
The manual says to use the other crystal for 22050Hz.
1998-08-09 03:48:42 +00:00
565adbaffb
Set the FIFO control bits correctly so that stereo recording works.
1998-08-09 02:54:50 +00:00
80457a2c65
Use auto-initialize DMA for recording.
1998-08-09 02:05:52 +00:00
e2686d0a1b
Use splnet, not splimp.
1998-08-08 23:51:39 +00:00
c49235f44c
Use splnet(), not splimp().
1998-08-08 23:44:12 +00:00
7795559d04
Use splaudio on the arm32 port.
1998-08-08 23:40:03 +00:00
254afcaecb
Sleeping forever kinda sucks.
1998-08-08 21:37:00 +00:00
17932f0575
Set the correct modes for the record channel.
1998-08-08 20:55:36 +00:00
94e9a8651a
Forgotten to commit this in last change.
1998-08-08 11:00:33 +00:00
815f9f2445
1. Untangle preprocessor conditionals for sanity and {} balance
...
2. Fix a race between the first callout and the first non-polled ncr_start()
1998-08-08 00:14:08 +00:00
49637cda8d
use an md keyboard beep replacement function on alpha too
1998-08-07 10:28:36 +00:00
9bb616c621
Regen.
1998-08-07 06:59:31 +00:00
88c6239026
Add product IDs for the 3Com Cyclone-based PCI Ethernet devices,
...
the 3c90xB DMA-only cards.
1998-08-07 06:58:57 +00:00
558733ffc6
Track our carrier status and report it in the media status callback.
1998-08-07 05:55:14 +00:00
pk