0913a897a5
Set error code for IRDA_RESET_PARAMS.
2001-12-05 04:30:24 +00:00
af5eb6fc8c
Fix some minor bug.
...
Add more debugging.
2001-12-05 04:07:06 +00:00
b81ddff1a7
Reset parameters on open.
2001-12-05 04:06:32 +00:00
a9f73b2015
s/defopt/defparam/ in previous; from lukem.
2001-12-05 03:50:09 +00:00
8a32c6fbfa
Change PCI_NETBSD_ENABLE_IDE back to a defopt - it's a mask.
2001-12-05 03:24:57 +00:00
037eb62a0f
Mention that much of the code was stolen from Tommy Bohlin.
2001-12-05 01:13:58 +00:00
3ead5262dd
Add some dongle support ioctl()s.
2001-12-04 23:33:33 +00:00
527fff66c0
Change speed setting a little.
2001-12-04 21:50:50 +00:00
e0b032d651
Add ir/ to SUBDIR.
2001-12-04 21:43:44 +00:00
64a9c02472
Implement speed setting.
2001-12-04 20:53:21 +00:00
a275d0a6b9
clarify copyright - this is all freshly written, no older code used
2001-12-04 20:51:23 +00:00
7a12ca98ab
Make this NCR 53C90 driver work, using the chip information from
...
Tymm Twillman's Linux mca_53c9x driver.
Tested with external ZIP100 only.
2001-12-04 20:47:58 +00:00
ceb358f80c
Fix so these files build with options DEBUG enabled.
...
The change to edc_mca.c may not work as I don't have any mca hardware.
2001-12-04 20:00:15 +00:00
636b7788a1
Implement input processing (untested).
2001-12-04 19:56:43 +00:00
1db6a7d9df
Simplify interface to irframe.
2001-12-04 19:56:17 +00:00
4950567ffc
Regen.
2001-12-04 18:46:51 +00:00
9925bfcf9f
PR/13711: Peter Seebach: Symbol's Spectrum24 pcmcia/prism2 card isn't probed.
2001-12-04 18:46:30 +00:00
5aee55caae
New file, describing what little I know of the layout of the Oak SCSI card.
2001-12-04 18:40:14 +00:00
b4371d47f5
Replace some misuses of "then" with "than".
2001-12-04 17:56:30 +00:00
6dbb6e893b
Simply entries added in previous.
2001-12-04 04:30:22 +00:00
5f99a98472
Add irframetty driver for IrDA frames over serial lines.
...
THIS MOST DEFINITELY DOES NOT WORK. IT'S VERY INCOMPLETE.
2001-12-03 23:32:32 +00:00
08733c9d51
add NCR_VARIANT_NCR53C90_86C01 "NCR53C90 (86C01)"
...
treat exactly like NCR_VARIANT_ESP100
2001-12-03 23:27:31 +00:00
5eb74d8bbe
Use correct format letter for chp->channel.
2001-12-03 11:07:34 +00:00
02aa2a59bc
Handle vendor/product lookup with a common routine.
2001-12-03 01:47:12 +00:00
bfc80822c7
Update my copyrigth.
2001-12-03 00:20:22 +00:00
4ca5497111
Allow wd to attach to something else than wdc/pciide (like USB<->ATA bridges):
...
- move some functions from ata.c to ata_wdc.c or wdc.c.
- add callbacks to struct ata_bustype so that wd.c doesn't call directly
functions from the lower level driver.
2001-12-03 00:11:15 +00:00
23d4159897
Add a subroutine to search for a vendor/product pair.
2001-12-02 23:25:25 +00:00
65768c08e2
No need to include atavar.h here.
2001-12-02 22:59:40 +00:00
4809ad42cb
Clean up attach of wd/atapibus:
...
kill ata_atapi_attach. Change atapibus to use a struct scsipi_channel instead
of ata_atapi_attach as attach arch. Create a ata_device, compatible with
scsipi_channel, to attach wd.
2001-12-02 22:44:32 +00:00
194762be5b
Touch up a little. No functional change.
2001-12-02 20:29:55 +00:00
1187860bcf
GC unused stuff.
2001-12-02 20:06:00 +00:00
f803294ead
use the new MCABUS_DMA_16BIT flag to use 16bit DMA (not implicit anymore)
2001-12-02 17:04:41 +00:00
2a22b00459
Add some IrDA names.
2001-12-02 16:32:04 +00:00
766e28edd3
Add driver for the Toshiba's Oboe IrDA chip. From Jan Sparud.
2001-12-02 16:30:30 +00:00
cf8a8cbe20
Fixes from Jan Sparud's code:
...
Make read and write methods symmetrical, add poll method.
2001-12-02 16:29:25 +00:00
1208c816b3
Add (#ifdef'ed out) code to support the PDMA hardware on the Oak SCSI card.
...
Unfortunately, this code seems not to work at present. I don't yet know why.
2001-12-02 14:49:32 +00:00
4e3bf132c0
Add comments naming our private-use characters (in lower case, to make them
...
distinct from real Unicode characters).
2001-12-02 12:46:32 +00:00
b540959734
Add framework for Ir devices. The irframe device is for delivering IrDA
...
frame to user land and the cir device is for consumer Ir (remote controls).
This code is only partially finished, but the irframe device works (given
a low level driver for the actual IrDA device).
2001-12-02 10:44:43 +00:00
adb908503d
Add identifiers for HP devices.
2001-12-02 01:17:51 +00:00
43fe22fed0
Revert previous; the _e003U definition is used elsewhere.
2001-12-02 01:04:26 +00:00
15d94a4c59
On a VT100, the "scanline 5" character is also used for box drawing, so
...
represent it as U+2500 (BOX DRAWINGS LIGHT HORIZONTAL). This makes NetHack
DECgraphics mode work properly on a wscons console using an IBM-encoded font.
2001-12-01 16:07:58 +00:00
c65c74ab28
regenerate (allocate identifier for NCR 53c90)
2001-12-01 10:44:35 +00:00
8272a293b7
allocate identifier for NCR 53C90
2001-12-01 10:43:36 +00:00
4b334401ca
Nonworking NCR 53c90 attachment. I don't get any interrupts from
...
the device yet, need to find real NCR53c90 docs to figure out what's wrong.
2001-12-01 10:42:38 +00:00
e69c410de5
Shorten wmesg so that they can be distinguished in ps/top output.
2001-12-01 09:42:39 +00:00
b56cddb826
Fix null pointer dereference when EHCI_DEBUG is defined (and
...
debug is enabled).
2001-12-01 09:39:32 +00:00
c6c2c476eb
Hum, no need to print a message each time we're waiting for the drive.
2001-12-01 00:05:04 +00:00
e6922f82d6
Various quirks for the ATAPI OnStream DI-30, mostly from the FreeBSD driver.
...
Many thanks to Chris Pinnock for giving me remote access to his hardware.
2001-12-01 00:03:45 +00:00
cd8d64fe2b
For ATAPI tape drives, poll for DSC (using a callout), to get the real
...
status of the command, and make sure the drive is ready for the next one.
2001-12-01 00:00:29 +00:00
2781ac8e07
Regen.
2001-11-30 13:41:17 +00:00
a287e24799
Add new devices. From URA Hiroshi in PR 14790.
2001-11-30 13:41:00 +00:00
33bfd7be53
Fix typo in copyright notice.
2001-11-29 17:15:44 +00:00
e0492a661d
Update note about ioctl tsleep error with error report.
2001-11-29 15:01:19 +00:00
4b06fc39aa
Regen.
2001-11-29 13:58:41 +00:00
7a7025366e
Add some ISD devices.
2001-11-29 13:58:22 +00:00
c01e71bac5
Plug a memory leak in an error case.
2001-11-29 11:07:12 +00:00
636e9cd08b
Add a "cacheline_size" argument to pci_configure_bus(). It is used
...
to set the cacheline size in the BHLC register. This should be the
size of the largest D-cache line on a system.
2001-11-28 23:48:34 +00:00
c563f940be
ELINK_W4_UBYTESOK is 0x0d. This is probably why kim is getting x2 numbers
...
in stats.
2001-11-28 23:46:42 +00:00
8528a3409b
Match also product id 0x627c, it was omitted by mistake.
...
Problem pointed out by Carl Drougge on tech-kern, thanks!
2001-11-28 20:56:47 +00:00
ecb81c3f6d
- convert usage of "defopt" to "defflag" where the relevant option does
...
not support a value (e.g., it's to be used as "options FOO" instead of
"options FOO=xxx"). options that take a value were converted to
defparam recently.
- minor whitespace & formatting cleanups
2001-11-28 10:21:10 +00:00
71376e0797
use #ifdef MEMORY_DISK_DYNAMIC (for consistency with the rest of the kernel)
2001-11-28 05:55:34 +00:00
9f42ccc795
use #ifdef DDB (for consistency with the rest of the kernel)
2001-11-28 05:45:27 +00:00
371fd3fc10
use #ifdef RAID_AUTOCONFIG (for consistency with the rest of the kernel)
2001-11-28 05:39:13 +00:00
4fd267f75d
Added the new defopt SCSI_OLD_NOINQUIRY; this is used instead
...
of sun2 to wrap code that conjures up INQUIRY responses for
certain specific old devices.
2001-11-28 01:04:49 +00:00
dc2a9f16a0
don't allocate a mbuf cluster if we don't need.
2001-11-27 21:40:55 +00:00
73001afb44
When opening the mouse port, be sure to open it for 8 data bits.
...
The sun2 PROM can leave the port configured for 7.
2001-11-27 16:19:43 +00:00
afdb23ddea
Set ONES (must be ones) bits in tmd1 of tx descriptors.
...
This fix avoids VMware 3.0/WinXP to crash.
2001-11-27 13:49:03 +00:00
b2dc60987f
add isapnp frontend for cs driver.
2001-11-27 12:23:31 +00:00
e9dd0249c8
regen for IBM EtherJet ISA.
2001-11-27 12:21:49 +00:00
dcb7807cbe
add IBM EtherJet ISA.
2001-11-27 12:20:39 +00:00
60adc294b9
Regen.
2001-11-27 03:25:53 +00:00
f349dc8748
cvs -q update -j1.147 -j1.148 pcmciadevs
2001-11-27 03:25:16 +00:00
f0002ba642
Added macros for the bits in the SYSBUS byte, and macros
...
for the i82596 PORT access interface, from the documentation
for that chip. These help clarify writes to the SYSBUS
part of the SCP, and PORT usage by i82596-aware drivers.
2001-11-26 23:30:59 +00:00
83c021b2a7
Added quirk entries for Adaptec and Emulex SCSI interposer boards.
...
Decode a limited set of SASI/SCSI-1 sense codes, and under sun2
only, conjure up INQUIRY responses for these boards.
2001-11-26 20:39:29 +00:00
380fd47edb
Change wchan name for usb task thread.
2001-11-26 20:16:55 +00:00
ec3eeda2fe
Use bus_space on sun2.
...
Update the comment to match list of bus_space-using ports.
Removed some old unused asm() labels.
2001-11-26 20:15:48 +00:00
adbdd3e6f6
add $NetBSD$ and copyright notice and rcsid.
2001-11-26 19:55:38 +00:00
f6b0ec4cce
- regen for IBM SCSI PCMCIA.
2001-11-26 19:49:34 +00:00
64b2149540
add IBM SCSI PCMCIA.
2001-11-26 19:48:55 +00:00
dbaca00330
move dev/isa/cs89x0{.c,{var,reg}.h} into dev/ic
...
and split isadma parts into /dev/isa/cs89x0isa*.
2001-11-26 19:17:05 +00:00
9324423e84
remove "stg", that I accidentally commited.
...
thanks, Tsutsui-san.
2001-11-26 14:21:33 +00:00
b43f7a4791
add pcmcia frontend for cs driver.
2001-11-26 11:17:34 +00:00
7af704bf48
- add power management code.
...
- use ether_ioctl instead of its own code.
(make ifconfig down works properly.)
2001-11-26 11:14:50 +00:00
e75321130b
Back out new "hme" driver because it causes a performance regression on
...
"netio" on an U5.
2001-11-26 10:39:29 +00:00
7287466499
Bug fixes for VLAN handling supplied by Klaus Klein in private e-mail.
2001-11-26 06:51:12 +00:00
a103dcf333
support BUFFALO CFtype WLAN card
...
wi0 at pcmcia1 function 0: BUFFALO, WLI-CF-S11G,
wi0: 802.11 address 00:07:40:0f:03:ea
wi0: using RF:PRISM2.5 MAC:ISL3873, Firmware: 1.3 variant 4
2001-11-26 04:34:56 +00:00
1c1ddcc034
regen
2001-11-26 04:19:12 +00:00
3dcc51c184
add device: BUFFALO AirStation CFtype WLAN Card
2001-11-26 04:18:26 +00:00
969cf96980
make it compile without INET
2001-11-26 02:41:20 +00:00
879d358535
* Add entry for Dolphin Peripherals 4036 dual-serial card.
...
(Note: PCI ID conflicts with Dolphin Peripherals 4025; a 4025 may
attach two serial units, but I cannot find one to test).
2001-11-26 00:41:24 +00:00
99756bfe86
Pull in Jason Wright's latest changes to the "hme" driver from OpenBSD.
...
This supports direct DMA from and into mbuf cluster, and VLAN
handling is done a bit differently.
2001-11-25 22:12:01 +00:00
a6ba091eef
Add a quirk for Olympus C-1. From FreeBSD (by iedowse)
2001-11-25 19:15:46 +00:00
596224e54f
Pay attention to the timeout value passed down by the scsipi layer.
2001-11-25 19:05:22 +00:00
6fcfa35836
Regen.
2001-11-25 17:17:42 +00:00
f070b78088
Add Olympus C-1.
2001-11-25 17:17:22 +00:00
ce170de115
- add (partial?) i/o mode support.
...
- add partial cs8920 support.
- add detach code.
- add a quirk for EtherJet PCMCIA with cardbus bridge.
(above "partial" means "engough to support EtherJet PCMCIA")
2001-11-24 20:18:55 +00:00
67238c609c
The header part of driver overhault:
...
* simplify and clean the attach code a lot, and support the 'drive'
locator
* pass proper dev_t to readdisklabel() - formerly, the passed value was
completely broken (used incorrect major and wrong minor), but worked
by accident
* worker thread is now spawned per controller, rather than per-drive;
i/o cannot be done concurrently by different drivers, only one
i/o can be pending at any time
* simplify the command queue code, just sleep appropriately when
!poll case, g/c 'async' code formerly needed, move the bio code
from ed_mca.c to edc_mca.c:edc_bio()
* other misc cleanups
2001-11-24 12:46:15 +00:00
211d58f020
don't need opt_mcaverbose.h here
...
print 'memory configured' instead of just 'configured' for memory expansion
cards
2001-11-24 12:33:14 +00:00
bb23eba3d8
MCA DMA hooked via bus_dma, so remove one
...
add entry regarding AHA-1640 (the driver needs testing)
2001-11-23 22:57:34 +00:00
07312f0fbb
Convert over to use the new MCA DMA facilities, which encapsulate
...
the MCA DMA controller access. This also means we gain >16MB RAM support.
While here, overhaul the driver to saner state, especially:
* simplify and clean the attach code a lot, and support the 'drive'
locator
* pass proper dev_t to readdisklabel() - formerly, the passed value was
completely broken (used incorrect major and wrong minor), but worked
by accident
* worker thread is now spawned per controller, rather than per-drive;
i/o cannot be done concurrently by different drivers, only one
i/o can be pending at any time
* simplify the command queue code, just sleep appropriately when
!poll case, g/c 'async' code formerly needed, move the bio code
from ed_mca.c to edc_mca.c:edc_bio()
* put all string arrays used by edc_dump_status_block() within #ifdef EDC_DEBUG,
and use numbers instead if it's not defined; this cuts object size by 5KB
* other misc cleanups
2001-11-23 22:53:09 +00:00
90fac765da
add 'drive' locator to mca edc
2001-11-23 22:35:46 +00:00
71651851a4
Match against EPSON GT-9700F.
2001-11-23 10:31:54 +00:00
674f6e4d18
Regen.
2001-11-23 10:30:49 +00:00
9930efdacf
Add product id of EPSON GT-9700F.
2001-11-23 10:29:30 +00:00
fe972558c0
Use __func__ instead of __FUNCTION__.
2001-11-23 10:20:47 +00:00
cdc819cd8a
Improve xfer abort sequence.
...
Fix another bug in qTD chain allocation.
2001-11-23 01:16:27 +00:00
6d8419a6cc
Handle Zip quirks differently.
...
Ugh! This driver need major overhaul.
2001-11-23 01:15:28 +00:00
6f95b070ca
Update mass storage protocol numbers.
2001-11-23 01:14:45 +00:00
1b1e4bd3d1
Remove hardcoded values for HZ (under different names!) from mcclock.c
...
and clock_machdep.h, so that now HZ can be any supported frequency of
the mc146818a/ds1287a RTCs.
Tested at 256Hz and 2048Hz.
2001-11-23 01:04:11 +00:00
37c8189778
Correct a comment.
2001-11-22 21:59:33 +00:00
d5c1ba9ed2
add a comment clarifying the DMA support, g/c the commented
...
out isa_dmacascade() call
some minor intendation changes, while here
2001-11-22 20:25:58 +00:00
5bf4d5554b
use little-endian crc on multicast hash for admtek chips.
2001-11-22 05:03:04 +00:00
7467533f5a
Improve dump routine slightly.
2001-11-22 04:31:01 +00:00
6e3a855c27
Fix a bug in qTD chain allocation.
...
Fix a qTD leak.
Handle out of memory conditions better.
My USB 2.0 CD-RW now mounts nicely and I can access files.
Performance is still lacking (it's at about 2Mbyte/s).
2001-11-22 04:20:49 +00:00
b5e0d97bf7
Add some DIAGNOSTIC tests.
2001-11-22 00:57:14 +00:00
37f2beed3e
Close multiplxees BEFORE removing the event variable they are
...
using (an interrupt at the wrong point caused disaster).
2001-11-22 00:54:23 +00:00
1fd7eeefcd
"than" instead of "then".
2001-11-21 19:14:19 +00:00
1f1e26bd6d
Presence looks better with a 'c' instead of an 's'.
2001-11-21 19:01:31 +00:00
55e6492076
Explicitly write explicitly without a second e.
2001-11-21 17:33:26 +00:00
bc136d1c2e
Make it compile without debug.
2001-11-21 16:22:58 +00:00
9dae283057
Add another "feature".
2001-11-21 16:12:56 +00:00
b2dc7b3fd3
Follow a safer protocol when updating the QH.
...
The EHCI driver isn't really working properly, but now the SCSI driver
correctly identifies my CD-RW drive! :-)
2001-11-21 16:05:13 +00:00
2c4813fa9d
Use NULL not 0.
2001-11-21 15:48:37 +00:00
df1a49923c
Fix indentation and typos.
2001-11-21 15:37:41 +00:00
5539d5afe6
Implement (incorrect?) data toggle clear method.
...
Implement allocation of qTD chains.
2001-11-21 14:00:12 +00:00
6bba920516
Wrap dump routine prototypes in #ifdef USB_DEBUG
2001-11-21 13:44:47 +00:00
ca0b46691f
Mask correct interrupt after error interrupt.
2001-11-21 13:43:38 +00:00
02f41ec3e6
Mask the correct interrupt after a door bell interrupt.
2001-11-21 13:42:19 +00:00
0adc2bbba2
Implement bulk transfers.
2001-11-21 13:04:50 +00:00
2d72c2726c
Add some interrupt processing.
2001-11-21 12:28:23 +00:00
4d4da7e06a
Fix typo in comment.
2001-11-21 12:25:55 +00:00
eca8404326
Don't use __func__ as variable. It prevents compilation.
...
Use __FUNCTION__ instead.
2001-11-21 09:08:38 +00:00
1029005107
Pay more attention to if the HC is being unplugged.
2001-11-21 08:18:39 +00:00
bf755aea42
make it compilable without OHCI_DEBUG
2001-11-21 05:52:50 +00:00
c907a8fbbd
Add missing }
2001-11-21 02:47:07 +00:00
4f7b354305
Set up control xfers.
...
Handle xfer timeouts.
Better debug messages.
2001-11-21 02:44:30 +00:00
28a6a57942
Use a task to perform the timeout abort so we have a process context when
...
sleeping.
2001-11-21 02:41:18 +00:00
5506bb0f06
Some more debug stuff.
2001-11-21 02:39:31 +00:00
2478d1b320
Cast some args to bitmask_snprintf().
2001-11-21 02:38:35 +00:00
b171d0908b
Create a special kernel thread to run the usb short lived tasks (instead
...
of using the device discovery threads).
2001-11-20 23:53:26 +00:00
9716a5f26d
Don't bother with interrupts when being disconnected.
2001-11-20 21:12:46 +00:00
a8de831b24
Support port indicator light.
2001-11-20 16:25:35 +00:00
2f560c9410
Sanity check max packet lengths.
2001-11-20 16:09:01 +00:00
7679101a11
Add a comment.
2001-11-20 16:08:37 +00:00
e5353fd3b5
Use longer reset for root hubs (as told in the spec).
2001-11-20 16:08:10 +00:00
0fa231134c
- replace "defopt" with "defparam" for options which must take a value,
...
as config(8) will warn for value-less defparam options
- minor whitespace/formatting cleanup
- consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 14:34:18 +00:00
8366f16a80
Don't wait for door bell interrupt when controller has been disconnected.
2001-11-20 14:28:44 +00:00
86e6ea35eb
Update for new speed handling.
2001-11-20 13:50:07 +00:00
a598bed92e
Simplify async list handling.
2001-11-20 13:49:23 +00:00
b38958f960
Use device speed in setup.
...
Simplify async list handling.
2001-11-20 13:49:07 +00:00
7e4459fe10
Keep track of device speed for USB 2.0.
2001-11-20 13:48:03 +00:00
482dbdf4e3
More USB 2.0 definitions.
2001-11-20 13:46:09 +00:00
99bccc3cab
- pull in opt_kgdb.h where necessary
...
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup
2001-11-20 08:43:19 +00:00
d11d1bd6fe
Cleanup some whitespace that indent got wrong a long time ago.
2001-11-20 02:37:29 +00:00
859356d03b
Add a new quirk value PQUIRK_CAP_SYNC for SCSI1 devices which support
...
sync transfers, and set PERIPH_CAP_SYNC for them in scsi_probe_device().
As per discussion on tech-kern.
2001-11-19 22:50:00 +00:00
eefc317219
Remove duplicate struct scsipi_start_stop.
2001-11-19 17:18:08 +00:00
27e3d258cd
Floptical drive needs PQUIRK_NODOORLOCK as well.
2001-11-19 16:54:20 +00:00
98576a36a5
regenerate for 1.147
2001-11-19 05:25:22 +00:00
cd84d65811
Merge from FreeBSD:
...
o Add devices from OpenBSD
o Minor sorting problems in my sorting attempt.
o A few additional -1 vendors for better card pattern generation.
o Add Zoom Air_4000 (needs to be added to awi)
o Add Netgear FA411 info (needs to be added to ne, plus quirks/fixes
to base pccard stuff before it will work).
o Merges through FreeBSD 1.22
2001-11-19 05:24:26 +00:00
2db9b8d2c8
Start of pipe open routine.
2001-11-19 02:57:16 +00:00
dfbba4149c
Injecting events into a mux that is not open is not an error.
2001-11-19 00:37:22 +00:00
ae27210d46
Insite Floptical drive needs PQUIRK_NOLUNS.
2001-11-19 00:22:47 +00:00
56cffa29dc
Add Titan 200H (from Wojciech Puchar)
2001-11-18 20:20:25 +00:00
c8f45396b3
Fix formatting of scsi_quirk_patterns[] and wrap long lines.
2001-11-18 17:22:43 +00:00
99c9ca8ab5
ANSIfy driver.
2001-11-18 17:15:48 +00:00
bf5b461387
Don't use a static variable in the power hook. It doesn't work with more
...
than one device.
2001-11-18 16:59:08 +00:00
aca8e01877
- Use MI ADAPTER_REQ_SET_XFER_MODE callback
...
- Move values in sc_sync[] member to sc_tinfo[]
- Change some u_int8_t values to int
- Remove unused wide negotiation states
- Misc cleanup
2001-11-18 14:50:11 +00:00
689089f7a9
- Use MI ADAPTER_REQ_SET_XFER_MODE callback.
...
- Nuke some magic numbers.
2001-11-18 14:33:10 +00:00
acd87a7687
Misc cleanups:
...
- correct trm_clock_period[] value
- pass BUS_DMA_{READ,WRITE,STREAMING} to bus_dmamap_load() as appropriate
- make sure to call bus_dmamap_unload() even after request sense
- saved srb params on request sense do not seem to be used,
so remove them from struct trm_srb
- handle target status more properly in trm_srb_done() and no need
to handle error retry in lower driver layer
- fix some comments
XXX Maybe need more cleanup around TQING for MI SCSI callback..
2001-11-18 13:02:30 +00:00
dbcf46ce8a
match the linksys prism2 card.
2001-11-18 04:27:49 +00:00
9d4995d7d6
regen
2001-11-18 04:26:16 +00:00
fa216ca465
add entries to allow one to match:
...
The Linksys Group, Inc., Instant Wireless Network PC Card, ISL37300PRevA
2001-11-18 04:25:43 +00:00
275c5352b7
add Trident 4DWAVE based (4DWAVE DX/NX,SiS 7018,ALi M5451) PCI audio driver
2001-11-18 03:16:02 +00:00
0f70418027
Add more fields to hardware structs.
...
Add memory allocation for various data structures.
2001-11-18 00:39:46 +00:00
11a1ddc5dd
- make sure to call bus_dmamap_unload() even after request sense
...
- fix usage of scb flags
- misc cleanup
2001-11-17 21:26:12 +00:00
4c7e639df1
fix a trivial lint warning
2001-11-17 05:31:27 +00:00
1f6462461a
Make it possible to report device speeds with ioctl(USB_DEVICEINFO).
2001-11-17 01:49:53 +00:00
25ffd2ae73
Regen.
2001-11-17 01:44:03 +00:00
c434bdf8c7
Yet another device.
2001-11-17 01:43:40 +00:00
1466b9ca1d
Back out the last two changes I made to this driver -- some people
...
have reported lossage.
2001-11-17 00:56:04 +00:00
b2b2b2b448
Implement port reset sequence correctly.
2001-11-16 23:52:10 +00:00
bdb84bd0cd
Regen
2001-11-16 18:34:08 +00:00
d10a585999
add another USR modem.
2001-11-16 18:33:35 +00:00
b10f58ec3e
Add ehci.
2001-11-16 17:10:30 +00:00
f73c358f8c
Add some more data structure defs.
2001-11-16 15:33:13 +00:00
3b323cfaae
Better error message.
2001-11-16 02:21:54 +00:00
3db4a768d4
Handle devices that disappear during reset gracefully.
2001-11-16 01:57:47 +00:00
07ea2e28cb
Recognize port status changes.
...
Hand over low and full speed devices to companion controller.
2001-11-16 01:57:08 +00:00
122d2863d8
Add root hub emulation.
2001-11-15 23:25:09 +00:00
1952efa437
Support Ultra/100 on CMD 0649.
2001-11-15 20:48:17 +00:00
b684cbc2a7
usbd_interface2device_handle() cannot fail.
2001-11-15 15:15:58 +00:00
2565646230
don't need <sys/types.h> when including <sys/param.h>
2001-11-15 09:47:59 +00:00
0b74b95459
If the controller doesn't support UDMA, don't allow enabling UDMA via
...
config flags.
2001-11-14 20:18:11 +00:00
effc318eca
Regen.
2001-11-14 17:50:44 +00:00
77a68c4bf2
Add another printer dongle.
2001-11-14 17:50:21 +00:00
6a161b0a72
Add a DISGNOSTIC message.
2001-11-13 17:45:07 +00:00
071697f107
fix RCSID
2001-11-13 13:32:34 +00:00
a4bae8b066
add/cleanup RCSID
2001-11-13 13:14:31 +00:00
13ac430285
add RCSID
2001-11-13 13:01:57 +00:00
0e9163223a
cleanup RCSID
2001-11-13 13:01:22 +00:00
augustss