first two chars directly.
Don't fail if FS is longer than 9 characters, but allocate a copy
dynamically and fail if that can't be done. Make inputFS static.
OK martin, bjs
a copy of its string and deal with DONTFREE properly, so that we don't try
to free the OCELL pointer later which points to a literal string in the text
segment.
- bsdtar is using the hardlink resolver code from libarchive now,
making it generate correct links for newc format
- fix a number of non-exploitable integer and buffer overflows
- SIGINFO/SIGUSR1 support for bsdtar
- bsdtar -s support
- better mtree support, it should now be able to handle the full syntax
of NetBSD's mtree
- handle extraction of archives where hardlink and linked to entry don't
agree on the permission (base.tgz has such entries for systat)
dhcpcd is a small DHCP client, supporting most, if not all, features of
dhclient. It is much smaller (1/6 of the size on amd64), but still
supports many of the more advanced modern RFCs like IPv4LL (RFC 3927),
Classless Static Routes (RFC 3442) and Node-specific Client Identifiers
(RFC 4361). It was written by Roy Marpled, partly in reply to the
discussion of the DHCP client Sommer of Code project.
Adds the following:
. tries to be "space safe" in the file names (untested)
. handle a couple more RCS ids being used by nvi
. handle properly several RCS ids on one line (happens in nvi)
... and of course adapt everything to nvi
- fix bugs in link resolver, mostly affecting bsdcpio [from NetBSD]
- fix bsdcpio -p for hardlinks
- correctness improvements for directory name handling with ustar format
- handle empty filenames correctly
- allow bsdtar -r and -T to be used together as well as --format with -r
and -u.
Changes in this release:
* Clauses 3 and 4 of the BSD license used by the project were dropped.
All the code is now under a 2-clause BSD license compatible with the
GNU General Public License (GPL).
* Added a C-only binding so that binary test programs do not need to be
tied to C++ at all. This binding is now known as the atf-c library.
* Renamed the C++ binding to atf-c++ for consistency with the new atf-c.
* Renamed the POSIX shell binding to atf-sh for consistency with the new
atf-c and atf-c++.
* Added a -w flag to test programs through which it is possible to specify
the work directory to be used. This was possible in prior releases by
defining the workdir configuration variable (-v workdir=...), but was a
conceptually incorrect mechanism.
* Test programs now preserve the execution order of test cases when they
are given in the command line. Even those mentioned more than once are
executed multiple times to comply with the user's requests.
in which "/wherever/src.2/../tools" was incorrectly changed to
"/wherever/src./tools" instead of the desired "/wherever/tools".
It's not clear to me that this script has any business trying to do this
sort of rewriting (and there's no guarantee that "/wherever/foo/.." and
"/wherever" both refer to the same place), but at least the new code
tries to be more careful than the old code.
- bsdpcio and bsdtar support more of the nbpax options
- linkify interface can handle all the known hardlink resolution
strategies
- mtree support extended, now it can almost process METALOG directly
- compress(1)-like write support
- fix gname/uname mixup
Major new features:
- work-in-progress cpio frontend
- much less data copying when handling uncompressed archives
- fix bugs for handling very large archives
- support for more zip archives and some of the self-extracting ones
Changes in this release:
* Added two new manual pages, atf-c++-api and atf-sh-api, describing the
C++ and POSIX shell interfaces used to write test programs.
* Added a pkg-config file, useful to get the flags to build against the
C++ library or to easily detect the presence of ATF.
* Added a way for test cases to require a specific architecture and/or
machine type through the new 'require.arch' and 'require.machine'
meta-data properties, respectively.
* Added the 'timeout' property to test cases, useful to set an upper-bound
limit for the test's run time and thus prevent global test program stalls
due to the test case's misbehavior.
* Added the atf-exec(1) internal utility, used to execute a command after
changing the process group it belongs to.
* Added the atf-killpg(1) internal utility, used to kill process groups.
* Multiple portability fixes. Of special interest, full support for SunOS
(Solaris Express Developer Edition 2007/09) using the Sun Studio 12 C++
compiler.
* Fixed a serious bug that prevented atf-run(1) from working at all under
Fedora 8 x86_64. Due to the nature of the bug, other platforms were
likely affected too.
the interoperation between the NetBSD iSCSI target and the Linux
open-iscsi initiator.
Add details about inter-operation with the NetBSD iSCSI initiator.
Add dates to all entries.
Add last updated date to the COMPATIBILITY file.
of the physical size of the regular file. This is useful for presenting
ISO images to initiators, as in the following:
In /etc/iscsi/targets:
# present an ISO image
extent2 /usr/sets/20071214/release/iso/i386cd.iso 0 size
target2 ro extent2 any
% priv /etc/rc.d/iscsi_target restart
Stopping iscsi_target.
Starting iscsi_target.
Reading configuration from `/etc/iscsi/targets'
target0:rw:any
extent0:/tmp/iscsi-target0:0:104857600
target1:rw:any
extent1:/tmp/iscsi-target1:0:52428800
target2:ro:any
extent2:/usr/sets/20071214/release/iso/i386cd.iso:0:354906112
DISK: 1 logical unit (204800 blocks, 512 bytes/block), type iscsi fs
DISK: LUN 0: 100 MB disk storage for "target0"
DISK: 1 logical unit (102400 blocks, 512 bytes/block), type iscsi fs
DISK: LUN 0: 50 MB disk storage for "target1"
DISK: 1 logical unit (693176 blocks, 512 bytes/block), type iscsi fs
DISK: LUN 0: 338 MB readonly disk storage for "target2"
TARGET: TargetName is iqn.1994-04.org.netbsd.iscsi-target
%
Please note that the NetBSD initiator can mount (via vnd) an iSCSI target
presented in this manner. The Microsoft iSCSI initiator sees the read-only
target as a normal SCSI disk, and fails (not surprisingly) to initialize
the disk. It's now possible to make ISO images available via iSCSI, and
NetBSD will DTRT.
In read-only targets, don't attempt to seek to the last block and rewrite
it, it may not work.
Don't assign 8 MB of unused space for use in each iSCSI disk - just use
1MB, which will be enough for the scatter gather iovecs.
Get rid of some dead code.
originally from Poul-Henning Kamp, as found in pkgsrc/pkgtools/digest.
This should address some of the MD5 problems that are being seen on
some hosts at login time.
Re-run autoconf, autoheader and configure.
Name) in the targets configuration file.
Now an entry of the form:
target0=iqn.binky rw extent0 any
will mean that target0 gets presented with the iqn of "iqn.binky".
This can be useful for shorter aliases for IQNs. With thanks to Peter
Eisch for the idea.
Note that the target's base IQN can still be set with the -t parameter
to iscsi-target.
particular, initialize the target name properly in g_target, and add
functions for setting the target name and retrieving a list of
available targets.
Thanks to agc for catching this.
When determining what to put in to param->negotiated, it is *NOT*
sufficient to just pick one of offer_tx or offer_rx -- we may need to
use answer_rx or answer_tx as the negotiated parameter. Failure to
pay attention to which case we are handling means we will occasionally
get "old parameter values" stuffed into responses, resulting in
obscure behavior (such as getting luns mixed up after a normal
connection is made) that is very difficult to replicate.
macro which was never changed. This is the QAD fix, longer term we will
move to use native md5 routines if available.
Should go some way to fixing authentication problems when using an
initiator and target of different endianness.
Revert Max LBA calculation when returning the Maximum LBA from the target
to the iinitiator, following an email conversation with Jonathan Kollasch,
who points out a number of things:
+ the NetBSD scsipi driver reads the value returned by the drive and adds
one to it, so that standard SCSI drives return the 0-based Max LBA in a
READ CAPACITY command.
+ it is up to the initiator to add 1 to the Max LBA to find out the size
of the LUN (Jonathan verified this by using the UNH iSCSI initiator on
to a NetBSD target)
+ an analogous change to the NetBSD initiator (revision 1.4 of
iscsifs.c) is needed.
is not used by the NetBSD reachover framework).
Get rid of the misplaced bin directory during the build phase, it's not
necessary.
Add commands to build the NetBSD iSCSI initiator.
Initial import of the Automated Testing Framework, version 0.3, a project
that provides a framework to easily implement test cases for the NetBSD
operating system and some tools to run them and generate reports with the
results.
Note that this is just the framework (libraries and tools), which is and
will be maintained externally. The tests themselves will come later, will
be put under the 'tests' hierarchy and will be managed exclusively under
the NetBSD CVS tree given that they are tied to the operating system.
The work done until version 0.1 was sponsored by the Google Summer of Code
2007 program and mentored by martin@.
- reject absolute names in +CONTENT
- fix size issues with pkg_add -u and buffer handling
- print file name of failed renames in pkgdb during pkg_add -u
- remove warning when running pkg_add as non-root
- remove more traces of master/slave mode
- update URLs for new ftp.netbsd.org layout
- make warning of broken symlinks separate from warning for non-existant
files
- FETCH_PRE_ARGS option for download-vulnerability-list
- print only base package name in FILE_NAME for pkg_info -X
- don't leak memory in Dewey, it is called a lot more often now and
makes a difference
- just allocate in vfcexec and free, don't bother caching the exec
buffer
- remove some FTP debugging code
- make more allocation errors in the pkgdb iteration code fatal
- glob patterns and simple patterns are checked for being version-free
as well
- try harder to get setgid permissions correctly when extracting as
non-root
- fix waitpid to correctly handle EINTR
code to retry on SIOCGIFCONF not returning all interfaces is broken,
this unreasonably large buffer should handle the case of a machine
with lots of (usually virtual) interfaces. dhcpd 4 uses a different
method to get interface configuration, so this kludge should go away
on upgrade.
Fix based on understanding of the code, but has been compile-tested
only, to address failure report received from Michael Graff.
Pay closer attention to the TSIH value that is assigned by the target -
rather than a simple (session id + 1) value, which cycles after 16 sessions
are used, use a central counter, and increment that whenever a TSIH is
apportioned. This fixes some problems for me with multiple targets being
ignored, and only the first target being used. Tested with the Microsoft
initiator, and the embryonic NetBSD initiator.
Use more enumerated types, rather than cpp definitions.
Use enumerated types also in preference to magic numbers.
In the iSCSI test harness, use the -t argument to specify a disk target
exported by the NetBSD iSCSI target. This allows us to test for the
situation outlined above.
Add my copyright to the test harness - there's no Intel code left anymore.
Modify the way initiator login and logout information is presented to the
user. This is only of concern to people who use this with the target in
non-detached (non-daemon) mode.
Get rid of the MODE_SENSE_10 and MODE_SELECT_10 cases in the disk switch,
since they do not return responses in the correct format yet.
functions. Code contributed by Aleksey Cheusov in PR#36394, and slightly
tweaked for closer-to-KNF conventions by me. Also slightly improved checks
of error returns.
- include <stdbool.h> so bool is available _KERNEL for sys/condvar.h
- include <sys/mutex.h> before defining _KERNEL so it won't try to
include <machine/intr.h> which isn't available to userland.
fixes builds on sparc64.
+ fix a reported problem with newer versions of FreeBSD which require
a block of data to be read and written, rather than a single byte.
+ add support for Extended Inquiry Data VPD Page (0x86), reported to be
necessary to interoperate with the AIX initiator.
+ add preliminary support for the Write and Verify SCSI operation (0x2e).
writable, do the touch(1) dance with 512 bytes of information, rather
than just a single byte - the single byte read and write causes
problems on newer versions of FreeBSD, I am informed. Patch from
Andrey Yakovlev, cleaned up to compile by myself.
Add support for Extended Inquiry Data VPD Page (0x86), reported to be
necessary to interoperate with the AIX initiator.
Add preliminary support for the Write and Verify SCSI operation (0x2e).
christos