be instead of hardcoding values.
+ Print the host SCSI ID in siiattach().
XXX - probably should do the same to the ASC driver?? The manuals for
the 5000 series machines don't mention the scsiidN env variable, but it
is present on all the models I've looked at...
+ Add prom_scsiid() to read and decode the prom scsiidN environment
variable that says what the host SCSI id should be.
+ Include <pmax/pmax/machdep.h> instead of declaring our own
prom_*() prototypes.
either endian. Not a perfect solution which would be revealed on
a certain condition when va_arg() is applied to magical struct
arguments passed by value. format_bytes() is now saved. With the
help from Noriyuki Soda and Masanari Tsubai.
bus. Without this, cbiiisc used to hang if nothing was connected.
Reported by Matthias Scheler. A similar method to avoid this was suggested
by Ralph Schmidt.
Remove the entire idea of fasttrap interrupts since V9 traps are really cheap,
the CPUs are really fast, and the completely different trap frames would make
these handlers really difficult to implement.
pmap_changeprot() was only used by the clock and one other place; deprecate it.
probeget() and probeset() now take 64-bit addresses even in 32-bit mode so we
can probe IO locations by physical addresses.
Some pmap cleanup.
Some more copyright cleanup.
the arguments are changed so the address is first and the ASI second so we
can have the address in %o0:%o1 and not worry about unused registers.
Also a bit of copyright cleanup.
non-cached. XXX clean this up by looking at the "non-cacheable" bit of
the full physical address.
avoid having 'nbuf' change between calls to `mdallocsys()' by setting it
in mdallocsys() like the MI allocsys() does. XXX fix this too!
fix some printf lossage.
update for probeget() changes -- though bus_space_probe() appears to be
unused on the sparc64.
device declaration, we don't want it). pull in psycho, pci,
ata and pciide code. clock, eeprom and power attach at sbus
*and* ebus now (clock as `eeprom' works). add `lpt at ebus',
wd major number, and other misc. commented devices.
(`SUNW,sabre') for now, and it doesn't really quite work there yet anyway.
the bus space/dma code is cloned from the sbus driver. the IOMMU code also
is cloned from the sbus code, but separated out into iommu.c so that we can
share it with the sbus driver. hopefully, much of the bus space/dma code
can also be re-shared with the sbus driver and the ebus driver but for now
these copies will do.
support for the real UltraSPARC PCI (`SUNW,psycho') is unwritten, though
most of this code is shared with it.
we can probe PCI config space and try to configue devices, but interrupts
don't work yet...
the bus space/dma code is cloned from the PCI code to do the same thing
which itself was cloned from the sbus bus space/dma code. the bus dma
code is non-functional at this point.
bytes/sector correctly.
Submitted by Detlev Würkner in PR 7653.
Non-trivial merge with the 1.30 change (handle old AmigaDOS fs partitions
with simulated sectorsperblock > 1) by myself, so don't blame Detlev if it
doesn't work (but I checked!).
XXX We still need changes to the file systems to handle this fully.
at levels 5 (sound) and 6 (via1) on the Q700.
Raise splhigh when reading and writing registers. It's ugly, but it's
possible that we could get an interrupt from a higher-level source,
causing a re-read of a memory location.
This is not good when, e.g., we are reading the interrupt register.
Ideally, we would just raise splhigh() in ncr53c9x_readregs(), but
that's m.i. code, and it may be expensive on other architectures.
I've fixed most (not all) m68k FPE bugs that give bogus
calculation results, esp. fsqrt instruction. Also, the internal FP
representation has been reduced from 115-bit mantissa to 67-bit
mantissa which reduced the required mantissa operation roughly by one
fourth. I've done an extensive (though not exhaustive - it's
impossible!) test on the internal routines by feeding them randomly
generated FP numbers, and found that the new code is more precise than
MC68040 FPU (it seems to have a rounding bug).
[ Only change was to keep fpu_calcea.c's name instead of renaming to
fpu_ea.c in Ken's patch. --akb ]
instead of ldstub, but since we aren't doing n-way locking it makes little
difference. N.B. Need to decide what to do with sparc64/sparc64/asm.h which
has name conflicts with sparc64/include/asm.h. So far most of
sparc64/sparc64/asm.h has been moved to ctlreg.h.
TLBUpdate() routine is used for dual purposes. In TLBmod case, just ok
to call 'tlbwi' (as designed). Result in saving of extraneous execution
path. MIPS1 only this moment.
scottr