and scsipi_device respectively, with size reduction of ncr53c9x_softc.
Specifying NULL instructs the driver to use default adapter and default
device codes. Every target port has ncr53c9x_attach(sc, NULL, NULL) anyway.
DMACSR_READ is now a CSR status bit which can be used to know if current transfer is
from cpu to device.
the old DMACSR_READ bit is renamed DMACSR_SETREAD. This is a control bit that tells
the dma transfer to be from cpu to device.
write operations appear to lose scsi interrupts and causes timeouts.
changes in this checkin include:
a nextdma bugfix causing a diagnostic check to erroneously trigger
Changed tail strategy to only use tail buffer for the minimal end slop
changed expected write dma overrun to 32 bytes.
turned on nextdma diagnostic check for dma end address since it
no longer gets triggerred by ethernet dma and helps debug scsi dma.
Added esp debugging printout and support.
a filesystem, but is not stable enough yet for general use.
increased priority of ethernet interrupts, mostly useful to aid debugging
of scsi interrupts while using an nfs disk.
added additional debugging output in the next dma driver.
perform extranneous cache flushes/purges before dma reads/ after dma writes
to aid debugging of scsi dma.
it still probes the disks ok, but is having trouble with 0xdeadbeef
in buffers read from the disk. Suspected problems with DMA alignment
and toggling the secret ninja dma control register
remove check for normal chaining interrupts and add check for combined chaining interrupts
only when used with a tail chain. This allows scsi to work for short unaligned buffers
and large aligned buffers.
Unfortunately, to get dma to work, we have to align past the end of
the buffer, which smashes other variables on the stack.
match function still disabled, as it isn't ready yet.
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090, from Matt Jacob.