8727da130b
In the name of backwards compatibility AUDIO_ENCODING_LINEAR has been
...
renamed AUDIO_ENCODING_SLINEAR and AUDIO_ENCODING_LINEAR reverts to the
NetBSD 1.2 sematics. A kernel with COMPAT_12 defined will accept
AUDIO_ENCODING_LINEAR and treat it as before, without COMPAT_12 it
will be rejected.
1997-07-15 07:46:04 +00:00
4193b52786
Do not compile in satlink unconditionally; from Thorsten Frueauf
...
<frueauf@ira.uka.de> in PR port-i386/3864.
1997-07-14 21:09:07 +00:00
d1f899bc4c
Satellite receiver driver for ISA cards from PlanetConnect by Jason and
...
Herb for Canada Connect Corp.
1997-07-13 19:09:46 +00:00
8a210e82b2
fix mixer goof on GUS max
1997-07-09 03:03:21 +00:00
2252d1317b
Add support for remote serial KGDB.
1997-07-05 20:52:40 +00:00
efde490942
foosize()'s return value is in DEV_BSIZE units; adjust the size obtained
...
from the disklabel accordingly.
1997-06-24 00:20:44 +00:00
d152627095
Make this work again; the code to avoid attaching a 3c509 in P&P mode
...
didn't map in the port properly, and it was only luck that it worked
on anything at all.
1997-06-23 05:25:40 +00:00
5d4e140e53
Remove spurious line left over in previous commit.
1997-06-18 22:17:14 +00:00
f5bf0d3701
wdsize(): only call wdopen()/wdclose() if not already open, per the
...
current `openmask'.
1997-06-18 20:39:55 +00:00
09cad93ce8
Implement a better backpressure mechanism so that data is collected
...
in the driver's buffer if the tty buffer is full. If the driver's buffer
becomes full, turn off receive interrupts until it drains a bit.
1997-06-15 11:18:59 +00:00
47fab5e3ae
Make this compile again in light of recent changes to cdio.h
1997-06-14 08:55:14 +00:00
86ad297c12
Fix a braino in record source selection and a pasto in detecting
...
16 bit mode recording.
1997-06-13 19:21:59 +00:00
11e78a6b0d
Pull thorpej-bus-dma branch into mainline.
1997-06-06 23:43:45 +00:00
9d52c4bb31
4th arg to bus_space_{read,write}_multi_2() is a u_int16_t *, and should be
...
cast if it isn't. (These casts aren't necessarily safe, because of
alignment issues, but they allow the code to compile with prototyped versions
of bus_space_{read,write}_multi_2().)
1997-06-04 20:42:56 +00:00
5759a768d7
add software emulation stub for ulinear_be
1997-05-31 15:30:22 +00:00
9a7f1bfa84
Use single mode, not demand mode, for auto-initialize transfers.
1997-05-29 21:46:07 +00:00
8551fb607a
fix popping noises on 16-bit ulinear output.
...
add big-endian support
XXX ULINEAR_BE still needs ad1848 emulation on gusmax
1997-05-29 05:33:15 +00:00
1b429137ae
make Jazz16 16-bit output work properly again. Still hangs somewhere
...
(not yet diagnosed) on occasion in high-speed mode, but a ^C will exit
immediately--no 30-second drainage timeout.
1997-05-29 04:57:02 +00:00
e9028468cd
Don't use the TC bit to check for wraparound in isa_dmacount(); remember the
...
transfer length and use that.
1997-05-28 20:02:39 +00:00
1bd32f9cad
Add Alaw encoding emulation.
1997-05-28 00:07:46 +00:00
1616170859
A cosmetic name change.
1997-05-27 23:37:53 +00:00
6756ff7858
Minor corrections to previous. Notably, make recording work on SBPro again.
1997-05-26 16:13:59 +00:00
6bfd7b7d45
Remove unneeded call to comstop() in commsrint(). This fixes a problem
...
where the driver would sometimes retransmit bytes.
1997-05-26 14:54:46 +00:00
97c6a307e3
Where _is_ that brick when you need it?!
1997-05-24 03:45:40 +00:00
72b5ba3901
Redo the way selecting the mode for SB cards is done completely.
...
It is now table driven since there are so many different variations
of SB cards out there.
Also fix a bug that stopped SB2 and SBPro from working.
1997-05-23 21:19:59 +00:00
c612a6fca7
Check that setting IRQ and DRQ on SB16 actually succeeds.
1997-05-23 09:45:40 +00:00
1fd29f4172
Make the audio default parameters into a globally accessible constant.
1997-05-20 12:51:43 +00:00
0db08d11e6
Redo the SB mixer code. The driver can now distinguish between the
...
four different mixer options: none, CT1335, CT1345, and CT1745.
It should now be possible to access most of the SB16 functionality.
1997-05-19 23:14:29 +00:00
50a39a3334
Add NetBSD RCS IDs.
1997-05-18 06:08:02 +00:00
8d6f509439
Mask the level registers as the documentation suggests.
1997-05-18 00:36:03 +00:00
d7a82223f4
Change lowater calculation a little.
...
Fix mixer setting bug and add some missing splaudio().
Set SB drq16 to 5 and don't pretend to be SB v1.0.
1997-05-17 23:26:33 +00:00
d3844873e8
Mods for ESP406/FAS408 ISA SCSI driver (from Eric S. Hvozda; PR#3581)
1997-05-17 20:58:47 +00:00
7f4962f3f3
An ESP406/FAS408 ISA SCSI adapter driver (from Eric S. Hvozda; PR#3581)
1997-05-17 20:58:12 +00:00
abdd4ddbea
Back to pretending to be a SB v1.0 again, the mixer code for higher
...
versions is buggy.
1997-05-16 07:07:22 +00:00
37be371415
Clean up emulation code, SB, and GUS drivers and add some more encoding
...
emulation to SB.
1997-05-13 19:02:11 +00:00
877dcf7fc9
restore accidentally-lost set of nchannels in driver layer
1997-05-12 04:11:43 +00:00
9734adc67f
use normal linear names/values for 8-bit encodings
...
mark mulaw as emulated (it's done via a mapping table)
use GUS query encoding routine, even on GUS max, since the encoding
stuff is handled by the GF1.
XXX might not be right for recording, but it's correct for playback.
1997-05-10 18:58:33 +00:00
e63a553175
Change the interface between high and lowlevel audio drivers again:
...
Set the encoding parameters slightly differently.
Remove the SW encoding/decodinf functions from this interface
and move them to the audio_parameter struct; this is both more efficient
and flexible.
1997-05-09 22:16:27 +00:00
c4a52794f1
Convert to new orthogonal audio encoding scheme and implement
...
some of the new encodings. The change to ioctl AUDIO_GETENC is
NOT backwards compatible.
1997-05-07 18:51:31 +00:00
383d8e6f79
update sb_printsc() to match current reality.
1997-05-07 04:36:00 +00:00
8f6ec1a681
wds_find has the sense of its return value backwards (0 vs 1). This
...
caused the probe to succeed when there was no device present.
1997-05-01 20:10:57 +00:00
2fb1d088c5
XXX Pretend that all SB cards are of model 1.
...
XXX This way you can at least use SB cards until the real fixes go in.
1997-04-30 02:08:12 +00:00
526ef2f618
Change the interface between the high and low level audio drivers
...
so that all audio encoding parameters are set at once. This simplifies
the interface and make error checking easier.
1997-04-29 21:01:33 +00:00
bc66bb3e6e
Oops; forgot to GC the last mbuf allocated when out of clusters.
...
Also, remove the internal mbuf queue, which is not needed by this driver.
1997-04-28 18:30:20 +00:00
103c7d360d
Oops; forgot to GC the last mbuf allocated when out of clusters.
1997-04-28 17:03:58 +00:00
b3192632db
On alpha, sizeof (long) != sizeof (int) and sizeof (int) != sizeof (ptr_t)
1997-04-28 15:52:44 +00:00
f05fad5ad9
- Add a new variable to epaddcard to call epconfig with the right chipset.
...
- Don't attach a 3c509 in PnP mode.
1997-04-27 09:44:45 +00:00
91a808523c
Fix typo in previous.
1997-04-24 08:05:13 +00:00
030c7010ee
If we fail to allocate a cluster to hold a large packet, simply
...
drop it rather than using a chain of tiny mbufs.
1997-04-24 02:04:33 +00:00
5cfcabc2fe
compile when __BROKEN_INDIRECT_CONFIG isn't defined.
1997-04-18 00:50:33 +00:00
f2746e9620
Update for new com driver.
1997-04-09 16:44:21 +00:00
73cfcd9f66
fix compile error if AUDIO_DEBUG
1997-04-06 17:21:45 +00:00
7dcb9bed4c
Make sure the bus tag is set where we need it.
1997-04-06 00:54:22 +00:00
29e9c34ad3
Add RCS id.
1997-04-06 00:35:19 +00:00
0a999294f5
Add support for MAD16 based audio cards.
...
XXX Change the way we determine to probe for it when
multiple I/O ranges are available.
1997-04-06 00:33:07 +00:00
7dedd37033
Busify the WSS driver.
1997-04-05 23:50:23 +00:00
9448a01404
New version of com driver. Uses a different queueing mechanism and a split
...
hardware/software interrupt mechanism for improved performance. Many odd
protocols bugs also fixed.
1997-04-04 20:56:34 +00:00
232ade1b2b
comdefaultrate -> comconsrate
...
comconsbah -> comconsioh
Only use comconsrate on the console.
1997-04-04 20:49:49 +00:00
ef8d40a999
Busify the driver (from perry).
1997-04-04 18:59:35 +00:00
4df7e1dac7
Remove superfluous probe message.
1997-04-02 03:58:25 +00:00
c1f72bba37
Add ifmedia hooks: include <ifmedia.h> and add sc_media to softc.
1997-03-30 22:47:05 +00:00
dd46e6280e
partial fix for PR 3385: correctly identify JAZZ-16 when AUDIO_DEBUG is
...
enabled
1997-03-29 05:41:28 +00:00
11117540d2
Use a temporary data structure for holding probe information, rather than a
...
full softc.
1997-03-29 02:32:30 +00:00
056fd71e85
General cleanup: bus.h, etc.
1997-03-29 02:11:09 +00:00
080350dc0d
Use a temporary data structure for holding probe information, rather than a
...
full softc.
1997-03-28 23:47:08 +00:00
eba3c11c27
some cleanup; still needs a *lot* of work
1997-03-25 07:57:14 +00:00
983d7a8c15
use new name sc_drq8 and initialize sc_drq16 (reflect changes to SB driver)
1997-03-24 05:30:28 +00:00
188dec4d19
Clean up a bit, and export isa_dmamask() and isa_dmaunmask() interfaces.
1997-03-21 02:17:11 +00:00
3523bc35d5
Add an isa_dmacount() function, to get the current residual count on a channel.
1997-03-21 00:00:21 +00:00
6f51eb5c3d
Use autoinitialize DMA mode on the SB2 and later. Partly from Torsten Duwe.
1997-03-20 21:42:11 +00:00
b89990fba6
Oops; fix pasto.
1997-03-20 20:18:40 +00:00
4f9648674a
Make sure we round the block size to a multiple of the sample size.
1997-03-20 20:15:24 +00:00
e0b3534b6c
Remove bogus block rounding code. If the application sets a
...
block size explicitly, it had better know what it's doing. From
PR 2587, by Robert Baron.
1997-03-20 16:04:22 +00:00
a2f33a43c2
Turn off a debugging printf().
1997-03-20 11:04:51 +00:00
95abb133dc
Add 16-bit DRQ support on PnP, and enable 16-bit output.
1997-03-20 11:03:10 +00:00
c1cc14fa25
Combine set_encoding and set_precision into a single set_format interface.
1997-03-20 06:48:48 +00:00
de69173e77
Fix oversights in previous.
1997-03-20 03:56:11 +00:00
a283cb636c
Check for errors returned by AD1848 routines.
1997-03-19 19:54:44 +00:00
2b72395bfc
ad1848_commit_settings(): Don't set the speed/format register if the
...
parameters haven't changed. From PR 3360, by Jason Baker.
Also, clean up several overly-complex interfaces.
1997-03-19 19:31:15 +00:00
eb7e30aa3d
normalize off-by-four ad1848 register offsets.
...
also silence probe unless debugging is enabled.
1997-03-19 06:47:37 +00:00
80a8a81608
normalize off-by-four ad1848 register offsets.
1997-03-19 06:45:21 +00:00
1d987a161b
#include <net/if_media.h>
1997-03-17 03:17:34 +00:00
07b064e02e
New ARP system, supports IPv4 over any hardware link.
...
Some of the stuff (e.g., rarpd, bootpd, dhcpd etc., libsa) still will
only support Ethernet. Tcpdump itself should be ok, but libpcap needs
lot of work.
For the detailed change history, look at the commit log entries for
the is-newarp branch.
1997-03-15 18:09:08 +00:00
8147d1718f
fix various AD1848/PSS misfeatures; from Jason Baker in PR kern/2045.
...
also did some misc cleanup of my own.
1997-03-13 08:34:49 +00:00
ac3b8b13b7
Don't share the silence block between devices. Make silence filling work for
...
more encodings, and make it device-independent. From Lennart Augustsson, in
PR kern/3305.
1997-03-13 02:19:32 +00:00
d9b86972c1
SB minor version number is always two digits
1997-03-12 07:06:19 +00:00
1186720517
eliminate leftover header from bt -> bha conversion; noted by Enami
...
Tsusgutomo in PR kern/3310.
1997-03-11 04:24:03 +00:00
700cbbae46
Fix bug introduced in the conversion to bus_*(). Don't always say that
...
we are a JASS16. From enami tsugutomo.
1997-03-03 21:40:01 +00:00
c7cec27edf
Move if_ep media-sense code from front ends to inside back end,
...
to prepare for if_media, and to support EISA 3c59x cards:
* change epconfig() to take a short that encodes the chipset
type (3c509, or Demon/Vortex/Boomerang).
* add distinct 3c509 and Demon/Vortex/Boomerang media-sense
functions to back end.
* Add EISA match/attach support for the 3c592 and 3c597
(Demon) cards as well as the 3c509-comatibl EISA 3c509/3c579.
* Assume that ISA and ISA PnP cards are 3c509-style, until
proof to the contrary (e.g. large packet support).
Tested on 3c595, 3c590, and 3c509b. Not tested on 3c515 or Demon.
1997-02-18 10:51:06 +00:00
2953a0ce90
Pass the i/o handle, not bus PA, to bus_space_unmap().
...
From Matthias Drochner <drochner@zelz28.zel.kfa-juelich.de>,
in PR #3216 .
1997-02-12 23:37:38 +00:00
dfa1224fab
Oops, pass the memory handle, not bus PA, to bus_space_unmap().
...
From Matthias Drochner <drochner@zelz28.zel.kfa-juelich.de>, in
PR #3216 .
1997-02-12 23:36:04 +00:00
1dd1504980
Move the aha ISA probe functions into a separate file.
1997-02-07 17:37:27 +00:00
f89ffa1fe4
don't clobber IER in cominit(). (suggested by mycroft.)
1997-01-30 19:42:33 +00:00
3573080902
split isasearch (!__BROKEN_INDIRECT_CONFIG) completely off of
...
isascan (__BROKEN_INDIRECT_CONFIG), and attempt multiple match/attach
of cloning devices in isasearch(). (If a match/attach succeeds for
a cloning device, try it again.)
1997-01-26 03:49:28 +00:00
8852c180ef
Fixes to wd driver from cgd -- corrects several nasty bugs typically
...
associated with coming out of suspends/sleeps on laptops.
Approved by fvdl.
1997-01-17 20:45:29 +00:00
e6717c0bc9
- convert to bus_space_*
...
- split attachment code to sb_isa.c
1997-01-16 21:03:30 +00:00
fe9f1f4e3e
add missing copyright and RCS ID; ok'd by mycroft
1997-01-15 07:06:42 +00:00
be33336052
If attaching the console, reinitialize it immediately.
1996-12-14 10:46:38 +00:00
58e4442168
Turn off the baud rate changing optimization.
1996-12-14 08:56:23 +00:00
d502e68402
Fill in sc_link.max_target
1996-12-10 21:27:16 +00:00
74187419b6
The last change fixed a last-minute goof in the __BROKEN_INDIRECT_CONFIG
...
case, but added a typo (extra parenthesis) in the !__BROKEN_INDIRECT_CONFIG
case. fix it.
1996-12-08 00:14:03 +00:00
243ef518d2
fix a (fatal) bug in the __BROKEN_INDIRECT_CONFIG changes checked
...
in yesterday. (got a little bit careless with #ifdef'd variables.)
1996-12-05 22:16:04 +00:00
179a058e17
fix AUTO_CAL_ENABLE bug, & misc. cleanup.
1996-12-05 07:01:30 +00:00
94909aee07
return proper output port. Fixes PR kern/2014.
1996-12-05 06:48:47 +00:00
3ec2c5af68
Duh, make sure i/o tags and handles are initialized before actually
...
probing for the LANCE chip.
1996-12-05 02:39:37 +00:00
197d80c63a
update these so they compile whether or not __BROKEN_INDIRECT_CONFIG
...
is defined.
1996-12-05 01:25:23 +00:00
c164cadf68
Convert to use <machine/bus.h>
1996-12-02 05:44:17 +00:00
3b4e2a1ac9
In wdattach(), when printing out info about the drive, make the output
...
look a little more like a SCSI disk's. This has the pleasant side-effect
of preventing the output from annoyingly extending past 80 columns.
1996-11-27 10:50:39 +00:00
d7c58f547e
Drop LPT_NPORTS to 4 from 8. Some lpt units require only 4 I/O ports
...
(e.g. from 0x3bc to 0x3bf, for example). Others may require more,
but until there's some special handling for them, 4 should be returned
so that on systems with I/O port accounting, the unit at 0x3bf can be
properly mapped, etc. (OK'd by mycroft.)
1996-11-23 23:22:50 +00:00
452ba6e098
restrict the FSTATE_STAR prohibition (and panic) to the i386 only. Cloning
...
devices actually do make sense on indirect-config busses, because you
might be able to have more than one of the busses! In addition, they're
useful because they don't require unit numbers to be wired down, so you
could e.g. have vga* at indirect? and vga* at direct?, and have the first
one found be unit number zero. Finally, devices which can divine their
own ports numbers, etc., actually should be cloning, even if you know you'll
only have one bus that they can live on.
1996-11-23 21:36:44 +00:00
bcc644fd7e
Add missing arguments to NIC_GET in debug code. Fixes kern/2875.
1996-11-17 04:11:18 +00:00
40bd2b1104
Fix front-ends of split uha driver to compile when DDB is not configured:
...
Propagate Debugger() macro from uha.c to uha_{eisa,isa}.c.
update file names accordingly.
1996-11-15 22:53:36 +00:00
b005a8ee10
move cominit() prototype to comvar.h, so that ports which use 'com'
...
for serial console, but don't use the (i386-specific)
comcninit()/comcnprobe() functions, can do the right thing.
1996-11-13 19:41:35 +00:00
457c188626
Use device struct from sbdsp_softc, eliminate redundant softc members.
...
Fixes PR kern/2237.
1996-11-12 07:39:56 +00:00
af29f79ed4
Fix WDDEBUG code; PR kern/1480.
1996-11-07 05:23:07 +00:00
53945ccb19
Eliminate unsolicited spewage; PR #2108 .
1996-11-05 07:20:32 +00:00
697941357c
Eliminate unsolicited spewage; PR #2108 .
1996-11-05 07:17:23 +00:00
24620e1cd0
Rearrange wds_attach() to initialize DMA channel before setting to cascade
...
mode.
Fix silly error in -ASC case, pointed out by Niklas Hallqvist.
1996-11-03 16:20:31 +00:00
f577ebda70
Move 'not finished' printf within AUDIO_DEBUG ifdefs, it should normally
...
be silent about this and caused confusion with stray interrupts.
1996-10-25 07:25:48 +00:00
233251d896
add missing argument to bus_space_map in ESP code
1996-10-22 00:45:25 +00:00
769a499800
New bus.h implementation/interface:
...
- No more distinction between i/o-mapped and memory-mapped
devices. It's all "bus space" now, and space tags
differentiate the space with finer grain than the
bus chipset tag.
- Add memory barrier methods.
- Implement space alloc/free methods.
- Implement region read/write methods (like memcpy to/from
bus space).
This interface provides a better abstraction for dealing with
machine-independent chipset drivers.
1996-10-21 22:34:38 +00:00
0211a3232d
Appease the compiler: get rid of some unused variables, add some
...
prototypes, and suppress a bogus "might be used uninitialized" warning.
It's clear from reading the logic of the function that produces the
warning that the variable will not be used uninitialized, but the
compiler just isn't smart enough, I guess. Marked XXX for future reference.
1996-10-17 04:34:08 +00:00
35b8c6aa4c
Add some prototypes, clean up some unused variables, and misc. other
...
compiler warning cleanup.
1996-10-17 04:21:55 +00:00
bfe653fbd7
fix PR 2851: make it compile under -Wformat
1996-10-16 11:32:45 +00:00
aa8449a9ef
fix compile errors & warnings
1996-10-16 01:12:18 +00:00
86373f8cf9
backout kprintf changes
1996-10-13 01:37:04 +00:00
58953408cb
printf -> kprintf, sprintf -> ksprintf
1996-10-10 22:04:48 +00:00
e51a0f737a
- printf -> kprintf, sprintf -> ksprintf
...
- fix unused variable warning
- include <systm.h>
1996-10-10 21:27:25 +00:00
ce31bd3eb6
- printf -> kprintf, sprintf -> ksprintf
...
- Remove unused variable
- include <systm.h>
1996-10-10 21:26:04 +00:00
18f1d603f0
- printf to kprintf, sprintf -> ksprintf
1996-10-10 21:25:07 +00:00
764db9b35b
- printf -> kprintf, sprintf -> ksprintf
...
- provide a default case to handle an unknown model number.
- include <systm.h>
- remove unused variable.
1996-10-10 21:23:28 +00:00
245e10b406
- printf -> kprintf, sprintf -> ksprintf
...
- ifdef an unused variable.
1996-10-10 21:21:52 +00:00
ee2c8600ee
- printf -> kprintf, sprintf -> ksprintf
...
- remove kvtop declaration.
1996-10-10 20:04:03 +00:00
b10785c0e4
fix "control reaches end of non-void function" in check_eh() for -Werror.
1996-10-06 21:24:36 +00:00
767522373b
If we get a RXRDY interrupt, but RXRDY is not set in the LSR, briefly set IER
...
to 0. This fixes a condition where some UARTs send an infinite stream of
RXRDY interrupts.
1996-10-06 01:52:26 +00:00
d1f08e3e87
Serial console changes:
...
* Enable FIFO with trigger level 1.
* Set DTR and RTS so terminals are happy.
1996-10-06 01:46:04 +00:00
870052156e
Better error message when the card is found but shared memory isn't enabled
1996-10-04 01:28:54 +00:00
e1b380e139
Fix a bus mem space leak; always unmap the card, regardless of the success
...
of cy_find().
1996-09-26 19:24:04 +00:00
63b18ee2f2
This file is now obsolete.
1996-09-25 20:44:09 +00:00
5d34f1a62b
New cyclades driver from Timo Rossi
1996-09-24 17:45:14 +00:00
67417a473a
Use bus.h.
1996-09-07 12:12:18 +00:00
94bfaac456
Wrap the definitions of CONADDR and CONUNIT in #ifndef.
1996-09-06 05:06:01 +00:00
82f0b829e8
compoll() -> comsoft()
1996-09-05 16:42:32 +00:00
8427290044
wtpoll() -> wtsoft()
1996-09-05 15:37:18 +00:00
110ee78a6f
Remove cyselect().
1996-09-05 15:35:09 +00:00
b3eac79b64
tty stop functions really should return void, not int, and certainly not both.
1996-09-02 06:43:16 +00:00
70944d2e2c
Minor changes.
1996-09-01 00:20:20 +00:00
e8b5bd5b35
Update.
1996-09-01 00:10:55 +00:00
44bb2d98e1
Split the UltraStor driver apart.
1996-08-31 20:26:48 +00:00
06fdef11fd
Split the BusLogic driver apart, and rename it to `bha (like BSDi).
1996-08-31 20:18:24 +00:00
augustss