99f640b958
Initial import. Gets as far as nfs_mountroot.
1997-01-14 20:57:06 +00:00
2ad3428397
Initial revision
1997-01-14 20:57:05 +00:00
2dbfabbb97
Initial import. Gets as far as nfs_mountroot.
1997-01-14 20:57:01 +00:00
aed485cdf2
add 'pseudo-device ccd' where necessary; PR kern/1830.
1997-01-11 09:11:37 +00:00
1468d5102b
Remove some junk.
1996-12-30 21:13:50 +00:00
b3adae991a
Fix warnings.
1996-12-30 21:12:01 +00:00
3bbf01bfb7
rename: ramdisk => md
1996-12-28 23:53:10 +00:00
d5b11782b5
rename: ramdisk => md
1996-12-28 23:27:00 +00:00
7a5585d645
Make sure the MDP_STACKADJ flag is cleared in p->p_md.md_flags
...
Do this in both machdep.c:setregs() and trap.c:(end of syscall)
for now. Need more analysis to see what is the best way...
Fixes PR#3034 (Thanks very much to Ian Dall for the fix!)
1996-12-17 21:35:30 +00:00
3cc81b9726
Add a diagnostic to panic when obio config data has a
...
default address, which is no longer supported on obio.
1996-12-17 21:21:13 +00:00
0c5e3e4955
Make this compile with -Werror -Wall -Wstrict-prototypes
...
(finally! yea!) Also get rid of __BROKEN_INDIRECT_CONFIG
1996-12-17 21:10:35 +00:00
282e39f88d
Adapt to the new version of dev/ic/z8530*
...
(Note: now define zsc_softc here.)
1996-12-17 21:00:54 +00:00
ac4b9ad819
The declarations for cache_flush_xxx are now in machdep.h
1996-12-17 20:55:28 +00:00
2140ee3fb9
The declarations for isr_add_xxx are now in autoconf.h
1996-12-17 20:54:23 +00:00
1169ecb0a2
Adapt to the new definition of struct zsc_softc
...
(the zsc_cs[2] members are now POINTERS!)
Also fix warnings...
1996-12-17 20:46:11 +00:00
31a2dbff56
No longer used.
1996-12-14 15:51:31 +00:00
250c59b7a6
Files with just an include line do not need a wrapper.
1996-12-13 20:23:51 +00:00
5eaee56ccf
Increase MAXMCAST from 50 to 250 (to match dev/ic/i82586.h).
1996-12-13 19:54:08 +00:00
5736d8f544
Kill some dead code.
1996-12-13 19:50:10 +00:00
6d6e6e45e0
Define MAXBSIZE as 32KB to limit the size clustered transfers.
1996-12-13 19:46:14 +00:00
96acdadef7
First step inn removing config_scan() and the hacks that gave devices
...
on indirect-config busses a (permanent) softc that they could share
between 'match' and 'attach' routines:
Define __BROKEN_INDIRECT_CONFIG so that old autoconfiguration
interfaces are used, until drivers are converted to use the new
interfaces (actually, converted back to use the _older_ interfaces)
which prohibit indirect configuration devices from receiving a softc
in their match routine that they can share with their attach routine.
1996-12-05 00:13:47 +00:00
4c1d96de78
* Replace explicit -O2 in CFLAGS with COPTS macro. Default COPTS?= -O2.
...
Lets users over-ride with makeoptions COPTS="..." in kernel config files.
Leave `mandatory' flags (like -msoft-float which on m68k enforces no
FP in kernel) in CFLAGS.
1996-12-01 06:12:25 +00:00
43df579125
Get rid of md_upte[] and my copyright line.
1996-11-25 22:09:11 +00:00
9ccd21bece
Copyright assigned to The NetBSD Foundation
1996-11-21 13:57:20 +00:00
0332502588
Most files that were copyright Adam Glass and/or Gordon W. Ross
...
are now copyright The NetBSD Foundation (rights assigned).
1996-11-20 18:56:49 +00:00
51cc81ac4f
Move SWAPPAGER, VNODEPAGER, DEVPAGER to std.sun3
1996-11-19 21:04:44 +00:00
576fa146ac
kill some outdated stuff
1996-11-19 20:58:32 +00:00
a0dffcafc2
Use bitmask_snprintf().
1996-11-13 07:00:30 +00:00
8a3333b2a9
Fix an inconsistency that came in with Lite: setrq() was renamed to
...
setrunqueue(), but remrq() was never renamed. Rename remrq() to
remrunqueue().
1996-11-06 20:19:19 +00:00
ffe8c5a2ab
Clean out some hacks left over from the old zs driver.
1996-11-04 16:16:09 +00:00
f9d54194d5
Allow the config line "flags" to set bits in si_options.
...
Thanks to Jason Thorpe for the fix! (PR#1929)
1996-10-30 00:31:39 +00:00
769fe0dfca
Get rid of some cruft in the match function.
1996-10-30 00:24:32 +00:00
aac9e275ac
Add a "submatch" function to the obio bus driver so the children
...
of this driver can get rid of the cruft in their match functions.
1996-10-30 00:20:01 +00:00
2fcc0a64d2
Use explicit addresses for obio devices.
1996-10-30 00:17:10 +00:00
2f8b021957
cosmetic...
1996-10-30 00:04:31 +00:00
23439db6ba
The new cg4 driver does not use dev/bt_subr.c
1996-10-29 19:58:14 +00:00
d6dfd783d9
Checkpoint new version of this driver with support for the "Type A"
...
variant of the CG4 (the one with the AMD colormap DACs). This has
been tested only on the "Type B" H/W at this point (Brooktree DACs).
Thanks to Ezra Story and Scott Ellis for the "Type A" support.
1996-10-29 19:54:19 +00:00
cb78378201
Fix typo (fbattach => fb_attach)
1996-10-29 19:27:37 +00:00
601935b8ae
Use struct trapframe instead of struct frame, and include a
...
slight hack to make this cross-build correctly on a SPARC.
1996-10-23 16:39:27 +00:00
4e462c2f6e
Dont bother grouping labels in computeSignal().
...
This form is easier to compare with trap.h
1996-10-23 16:30:48 +00:00
6fa72d79b5
Add options EXEC_AOUT and EXEC_SCRIPT
1996-10-23 16:14:23 +00:00
b0e589ced7
Define the *poll functions.
1996-10-22 15:58:12 +00:00
150c33e60b
Use ${INSTALL}.
1996-10-18 05:55:26 +00:00
a087bfeb5c
backout previous kprintf change
1996-10-13 03:47:25 +00:00
19d8368f2f
printf -> kprintf, sprintf -> ksprintf
1996-10-11 00:44:42 +00:00
401d011da6
Merge netbsd-1-2 branch back into mainline.
1996-10-09 00:14:32 +00:00
edd633aef1
Changed "../../m68k/fpe/files.fpe" to "arch/m68k/fpe/files.fpe" because of config changes
1996-10-08 18:03:00 +00:00
705b2e0726
Changed "std.sun3" to "arch/sun3/conf/std.sun3" because of config changes
1996-10-08 18:01:47 +00:00
149707f018
Add const qualifer to second arg of bus_print
1996-10-08 17:55:23 +00:00
e36e19cf1e
repoint at shared aout_machdep.h, not exec.h
1996-10-08 13:07:26 +00:00
472889f8e4
moved to aout_machdep.h (via repository copy)
1996-10-08 12:57:37 +00:00
79b5c352a5
Fix bounds_check_with_label() as suggested in PR#2598 (Thanks to der Mouse)
1996-09-26 18:10:21 +00:00
b3ffba62a6
Move strip(1) flags into a separate variable, so that $STRIP can
...
be passed to subordinate make(1)s. Remove $TOUCH. Add HOSTED_CC,
HOSTED_CPPFLAGS, and HOSTED_CFLAGS, and use them when depending genassym.
1996-09-09 21:06:55 +00:00
de5110f41e
Use <m68k/exec.h>.
1996-09-08 01:00:35 +00:00
e6dd44f034
Use SIGBUS iff we get a legitimate bus fault. Use SIGSEGV for page protection
...
violations (per Solaris, SVR4, AIX, Linux, Irix, and SunOS).
1996-09-07 22:26:41 +00:00
fc3def4096
Remove duplicate declarations of LKM functions and macros.
1996-09-05 15:46:22 +00:00
b3eac79b64
tty stop functions really should return void, not int, and certainly not both.
1996-09-02 06:43:16 +00:00
30a617c634
Wrap the default definition of `S' in `.ifndef'.
1996-08-31 21:40:47 +00:00
71ad30d0e9
(1) set scsi_link channel to either the appropriate channel (if a
...
multi-channel driver), or to SCSI_CHANNEL_ONLY_ONE if a
single-channel driver.
(2) use scsiprint() rather than a locally-defined autoconfig print
function, and kill any locally-defined print function.
1996-08-28 18:59:15 +00:00
2a73ef60b7
change cfprint_t type definition to take a const char *, rather than
...
a char *, because that's what was really intended, and because
if the print function modifies the string, various things could become
unhappy (so the string should _not_ be modified).
1996-08-27 21:53:46 +00:00
b8e9f36083
add COMPAT_12.
1996-08-26 23:39:36 +00:00
c0bae2d189
sync with sparc version:
...
repair XDC_HWAIT macro to handle the fact that waithead is now
unsigned. should fix xdc watchdog timeouts noted in port-sparc
by nathanw@mit.edu .
1996-08-12 20:28:54 +00:00
558d72128e
Put into . Remove hooks for `config-dependent' and
...
`device-driver' flags.
1996-08-12 00:51:24 +00:00
cf67f29afe
* Add a HOSTED_C_C variable, which strips `-p', `-pg', and
...
`-nostdinc', and use it when building genassym.
* Use `-nostdinc' just to be sure we're self-contained.
1996-08-10 06:07:57 +00:00
f94052ed3a
* Define CWARNFLAGS and MKDEP in some moderately consistent fashion.
...
* Make S expand to an absolute path at compile time.
* Use `-S' rather than `-x' to remove debugging symbols.
* Garbage collect unused variables.
* Reverse a handful of port-specific changes that do not correspond to
the common build model and are not needed.
1996-08-10 05:29:24 +00:00
5abbf990f3
Change reboot(2) to take two arguments: bootopt like normal and also
...
a boot string for firmware that can do this, such as the SPARC and
the sun3 models. It is currently silently ignored on all other
hardware now, however. The MD function "boot()" has been changed to
also take a char *.
1996-08-09 10:30:23 +00:00
bf2c897818
COMPATOBJS -> COMPAT_OBJS (already done on release branch)
...
Also, sys/compat/common/kern_prot_43.c no longer exists on the trunk,
so don't attempt to compile it.
1996-07-11 16:52:10 +00:00
209801c89e
Add memcpy.c to SRC_sa
1996-06-26 19:32:32 +00:00
e1cc05a94c
Fix ZMAGIC (from Chuck Cranor)
1996-06-20 03:59:41 +00:00
a1ec070f97
Take control over the kernel libraries so cross-build is easier.
1996-06-20 03:47:27 +00:00
4bb67f0a27
Take control over the kernel libraries so cross-build is easier.
1996-06-20 03:11:06 +00:00
a2b74a415d
Several minor changes to make cross-compilation easier.
...
(I do most compiles on a sparc these days...)
1996-06-18 16:18:34 +00:00
d3b59f36ab
Add the field "pcb_mmuctx" for future use by the pmap code.
...
(This will make later update of the pmap code much easier.)
1996-06-18 16:03:45 +00:00
bf7ab63c97
Move some of the DMA engine initialization from the "start" routine
...
to the "setup" routine. Doing the initialization earlier prevents
nasty race conditions where the 5380 prefetch changes the counter.
1996-06-17 23:21:29 +00:00
dc066b6a10
KGDB support
1996-06-17 15:40:36 +00:00
af3f9266db
Correct return type of boot() and reboot2().
1996-06-17 15:27:16 +00:00
3274834c18
Use the PROM->input_source setting instead of EEPROM to determine
...
where the console is, because that is correct if, for example, you
boot with the diag/norm switch set for diagnostics and the EEPROM
is set for keyboard/display.
1996-06-17 15:17:06 +00:00
8ef4845dec
merge 1.2 changes
1996-06-15 14:58:02 +00:00
7d5909191e
Remove unnecessary CPP conditional around file contents.
1996-06-15 14:47:49 +00:00
75a1ca034a
Add KGDB support
1996-06-15 14:34:32 +00:00
a0d3ad800b
Add the version line.
1996-05-17 19:39:30 +00:00
50ecbc1c84
Rename cs_pclk_div16 to cs_brg_clk to clarify the fact that the
...
Baud Rate Generator (BRG) clock is not necessarily PCLK/16.
1996-05-17 19:32:06 +00:00
540f9550c0
Make `make depend' work for libraries.
1996-05-11 16:11:30 +00:00
dedd4cceab
Fix typo, noticed by Curt Sampson <curt@portal.ca>.
1996-05-09 21:15:47 +00:00
69351e2be6
Changed struct ifnet to have a pointer to the softc of the underlying
...
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:35:48 +00:00
0584bf86a8
Make the MI LANCE driver standalone, and use cfattach to resolve
...
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
Changed struct ifnet to have a pointer to the softc of the underlying
device and a printable "external name" (name + unit number), thus eliminating
if_name and if_unit. Updated interface to (*if_watchdog)() and (*if_start)()
to take a struct ifnet *, rather than a unit number.
1996-05-07 01:32:31 +00:00
eadc4bd43f
Make the MI LANCE driver standalone, and use cfattach to resolve
...
naming conflicts between bus attachments on ports that can have
multiple instances of the LANCE.
1996-05-07 01:30:18 +00:00
4f0e481bc3
Kernel crash dumps now work on the sun3. (Yea!)
1996-05-05 06:02:23 +00:00
99d2ff44d8
proto now says void dk_establish()
1996-05-05 06:00:31 +00:00
3d0b5f42cc
Used by the new libkvm
1996-05-05 04:19:31 +00:00
49d7518e86
Add VA_SEGNUM for libkvm.
1996-05-05 04:18:28 +00:00
dd27878e7f
Catch up with some prototype changes.
1996-04-26 18:37:58 +00:00
035d12359e
Remove some hacks that "went around" the linesw[] operations.
1996-04-26 18:36:54 +00:00
78403e6c0c
Add a hardware dependent initialization function lehwinit()
1996-04-22 02:25:54 +00:00
d7d306aeb7
change LANCE copy & zero functions' names to start with amd7990_, and
...
remove their 'integrate' (usually defined to be 'static') keywords.
when lance drivers are split up by attachment, more than one file will
reference the copy/zero functions (i.e. not just the file that pulls in
am7990.c... and eventually inclusion of am7990.c should go away entirely).
1996-04-18 00:25:11 +00:00
f6762bf5cf
Retry calls to the PROM strategy function. Fixes PR# 2145
...
Call prom_iopen only on the first disk_open call, otherwise
only the first file open attempt ever works. Fixes PR# 1726
Both from der Mouse <mouse@Collatz.McRCIM.McGill.EDU>
1996-04-10 18:31:14 +00:00
d1ca7d4c47
minor cleanup
1996-04-07 05:47:26 +00:00
639d1d787e
minor nit...
1996-04-07 05:45:08 +00:00
a682037ce7
SunOS binaries use "trap #2" (for some obscure FPU business,
...
or so claims the comment in trap.c). Reinstate the code that
treats trap 2 as "trace" which is given special handling in
trap.c for SunOS binaries. Also add some comments about this.
Thanks to <Ian.Dall@dsto.defence.gov.au> for this one.
1996-04-07 05:42:17 +00:00
83f9bdc359
update for the fact that config_found() and config_rootfound() now
...
return pointers. (Check vs. NULL, rather than just boolean tests.)
1996-04-04 06:25:00 +00:00
a77bcc1072
replaced by if_levar.h
1996-03-26 23:17:13 +00:00
f8a1588bfc
This was carved up and reincarnated as si*
1996-03-26 22:08:24 +00:00
96918eaac2
obsolete
1996-03-26 22:05:53 +00:00
2e7e6c537d
Use the traditional names (*reg.h, *var.h)
1996-03-26 22:04:14 +00:00
92d7925a57
No longer used.
1996-03-26 15:23:35 +00:00
fa59facc05
New autoconfig design that controls attach order.
1996-03-26 15:15:46 +00:00
3bc57e3794
Document how to configure a kernel with ttyc,ttyd instead of kbd/ms
1996-03-26 15:14:27 +00:00
c5ea521ed9
New "mainbus" driver allows control over autoconfig order.
1996-03-26 15:03:58 +00:00
c0a60cd87b
New driver to handle the "interrupt register".
1996-03-26 15:03:11 +00:00
e4b4200e43
Take advantage of the new config attach stuff by
...
splitting out the obio and vme support code.
Also move it back to the traditional name (si).
1996-03-26 15:01:10 +00:00
3d58330322
No longer need rd_match_hook.
1996-03-26 14:58:47 +00:00
fa2d8c6e76
New driver for handling the memory error interrupt.
1996-03-26 14:57:43 +00:00
5ea3281a61
Adapt to redesigned autoconfig scheme for obio, and
...
define a fast ETHER_CMP routine for dev/ic/am7990.c
1996-03-26 14:42:18 +00:00
8eb8bb83b4
Take advantage of the new config attach stuff by
...
splitting out the obio and vme support code.
1996-03-26 14:38:29 +00:00
ac302c84e6
Correct type of the nofault pointer.
1996-03-21 23:03:49 +00:00
edf28f2285
Catch-up with cf_driver/cf_attach changes.
1996-03-21 23:01:21 +00:00
94907fa254
adjust to deal with expression support for optional file specs
1996-03-17 13:21:09 +00:00
0cfd94f31d
fix typos in recent attachment changes.
1996-03-17 06:08:12 +00:00
3cd14f7597
New device attachment scheme:
...
- split softc size and match/attach out from cfdriver into
a new struct cfattach.
- new "attach" directive for files.*. May specify the name of
the cfattach structure, so that devices may be easily attached
to parents with different autoconfiguration semantics.
1996-03-17 02:00:30 +00:00
25b31cbc91
fdopen -> filedescopen
1996-03-14 21:31:56 +00:00
1a55d915ae
Don't call dvma_kvtopa() with a null pointer.
1996-03-08 06:17:35 +00:00
6da2ce259c
Allow for a machine dependent match function - rd_match_hook()
1996-03-07 10:25:28 +00:00
9f330ed6e0
Fix two bugs reported by Don Koch <aardvark@poirot.krl.com> (PR#2168).
...
(the xd bugs also apply to the xy driver...)
[1] check return value from malloc() for NULL before trying to bzero it.
[2] use "=" rather than "|=" when writing to CSR (otherwise you may
ACK something you don't mean to!).
1996-03-04 20:25:32 +00:00
e4c86dc3f8
Fix two bugs reported by Don Koch <aardvark@poirot.krl.com> (PR#2168).
...
[1] check return value from malloc() for NULL before trying to bzero it.
[2] use "=" rather than "|=" when writing to CSR (otherwise you may
ACK something you don't mean to!).
1996-03-04 20:22:50 +00:00
18ec26aa21
add _MACHINE and _MACHINE_ARCH, which are like MACHINE and MACHINE_ARCH,
...
execpt without quotes. meant to be __CONCAT()ted for easy #includes
of machine-dependent headers for MI code (e.g. for the MI ISA/EISA/PCI/TC
bus code).
1996-03-04 05:04:10 +00:00
1c5d7babe5
Clean up tabbing/spacing in defns of MACHINE, MACHINE_ARCH, and MID_MACHINE.
1996-03-01 23:30:08 +00:00
3d67685d36
Do not build vnode_if.[ch] for each kernel. Build them once, like the
...
various syscall sources/headers, and just compile them. From PR 2142, OK'd
by mycroft.
1996-02-29 20:54:58 +00:00
2de7b2e5cb
update PMAP_PREFER
1996-02-28 22:44:33 +00:00
2d885d15e9
Fixup an RCS id.
1996-02-28 20:54:50 +00:00
51815fdcd6
Kill a mis-matched and unnecessary declaration.
1996-02-28 01:48:48 +00:00
2ce52ae489
Define build programs with `?=', so they can be overridden with `makeoptions'.
1996-02-26 02:53:20 +00:00
a246f6c835
Fixup some RCS ids.
1996-02-22 06:50:49 +00:00
3700dbe324
Correct the DMA transfer count when the target disconnects before
...
the whole transfer is completed. (Affects VME writes)
Reselect now works on the VME si board!
1996-02-22 03:22:52 +00:00
f63dd5fef2
sync with sparc version:
...
minor clean up: revise locations of disk_busy/disk_unbusy calls to match xd.c
1996-02-21 03:40:39 +00:00
9daf57454e
use phys_map for DVMA like the sparc
1996-02-20 22:05:32 +00:00
dfdd60a3d1
keep static symbols
1996-02-20 22:03:56 +00:00
b80de84521
kill SCSIDEBUG
1996-02-20 22:03:20 +00:00
e3e5c394ae
Oh. Now that size is unsigned, (size >= 0) is always true.
1996-02-20 02:42:55 +00:00
b3547c4296
New handlers for kernel trace and breakpoint traps. These allow
...
the kernel debugger (ddb or kgdb) to play with the stack pointer.
1996-02-16 23:36:52 +00:00
7dff812d6e
prototype fixes
1996-02-16 23:32:00 +00:00
c59b002704
Sync. with sparc version, and fix some cosmetic nits...
1996-02-16 20:36:11 +00:00
9433112204
Have <sys/param.h> so no need for <sys/types.h>
1996-02-16 20:33:27 +00:00
1c0f939eba
Fix comment
1996-02-16 20:18:51 +00:00
b49f01b2ce
Fix comments
1996-02-16 20:17:58 +00:00
7b4335f9db
Moved functions for debugger memory access to db_memrw.c
...
so they can be pulled in for either ddb and/or kgdb.
1996-02-16 20:08:44 +00:00
5cb4cacff1
Add some things needed by KGDB
1996-02-16 20:04:36 +00:00
49b1d84e94
Resurrecting db_memrw.c to hold some code shared by ddb and kgdb.
1996-02-16 19:11:27 +00:00
5404ccfbd7
Improved delay() implementation with lower overhead,
...
makes very short delays much more accurate.
1996-02-16 18:06:11 +00:00
bcfac202c8
No longer need delay2us(), just use delay(2)
1996-02-16 18:00:33 +00:00
8b686f43c0
machdep.c
1996-02-13 19:40:22 +00:00
243011c19d
pass correct type to setjmp
1996-02-13 19:39:08 +00:00
89c2f6dc04
now in sys/dev
1996-02-13 17:29:15 +00:00
9e07977e11
no longer useful
1996-02-13 17:27:41 +00:00
44aab5f4d3
make pmap_page_index return int
1996-02-12 21:21:15 +00:00
2e06ee143c
Avoid 3/50 H/W bug (I hope)
1996-02-12 05:19:09 +00:00
c0a9716f6e
Fix address wrap in bus_mapin
1996-02-12 05:14:19 +00:00
f4cc5b017a
eliminate setjmp.h
1996-02-09 21:51:39 +00:00
753fe3a25a
Fix mkdep problems due to missing flags.
1996-02-09 02:21:13 +00:00
718ac5d246
[import changes from sparc port]
...
- moved disk_busy() call from xdstrategy() to xdc_startbuf()
[prevents disk_unbusy panic when disk is loaded (if no
free IOPBs, xdstrategy() would queue the buffer for pickup
by xdcintr() but xdcintr() would never call disk_busy().
xdc_startbuf() is a better place since all bufs are routed
through here] problem detected by girish@dworkin.wustl.edu ,
diagnosed and corrected by me.
- move disk_unbusy() call in xdc_remove_iorq() before the call to
XDC_FREE() [don't want to access a data structure that was just put
on a free list]
1996-02-08 04:42:57 +00:00
2c8314f73c
vm prototype changes
1996-02-05 02:06:38 +00:00
b1e9c83633
Quick fix to make this build. More to come...
1996-02-04 06:06:12 +00:00
5bc076e17e
Use `-traditional-cpp' when building .s and .S files.
1996-02-03 00:43:50 +00:00
dcd66e9f4d
Clone these, and fix many bugs.
1996-02-02 20:08:17 +00:00
9db20bf150
Don't define _KERNEL here.
1996-02-02 19:42:08 +00:00
fc9d84fb46
assym.s -> assym.h
...
(Some ports did this already.)
1996-02-02 02:34:09 +00:00
88e512b693
LOCORE -> _LOCORE
1996-02-01 22:28:24 +00:00
6cc7bd528f
Oops, didn't notice those type warnings...
1996-01-31 17:20:39 +00:00
f2e57c6dc8
Eliminate remaining direct references to the z8530 chip
...
to allow the MD access functions to do delays, etc.
1996-01-30 22:34:52 +00:00
0d44b7f3fe
Include m68k/fpe/files.fpe for FPU emulation support (fixes PR 1773)
1996-01-30 00:35:28 +00:00
57664ea85c
Oops, did not mean to check that one in...
1996-01-29 23:59:04 +00:00
38c7f668a2
Clean-up open/close logic of "net" device. Fixes PR 1726
1996-01-29 23:54:14 +00:00
4541c9f5c6
Work-around sensitivity to DVMA address in PROM revision 2.6 so the
...
netboot program will work on Sun3/50 machines. Also fixes PR 1928.
1996-01-29 23:41:03 +00:00
f261ae08c7
Update for the new z8530 driver
1996-01-24 22:39:48 +00:00
16e4c58c47
file z8530var.h was initially added on branch netbsd-1-1.
1996-01-24 21:13:22 +00:00
8f339409b7
sync with sparc:
...
- move disk_attach() to before reading the disk label as per Jason.
otherwise we are reading into an unallocated buffer (oops!)
1996-01-13 03:50:05 +00:00
5b39541e48
New generic disk framework. Highlights:
...
- New metrics handling. Metrics are now kept in the new
`struct disk'. Busy time is now stored as a timeval, and
transfer count in bytes.
- Storage for disklabels is now dynamically allocated, so that
the size of the disk structure is not machine-dependent.
- Several new functions for attaching and detaching disks, and
handling metrics calculation.
Old-style instrumentation is still supported in drivers that did it before.
However, old-style instrumentation is being deprecated, and will go away
once the userland utilities are updated for the new framework.
For usage and architectural details, see the forthcoming disk(9) manual
page.
1996-01-07 22:01:38 +00:00
2fce159ff8
Changed name of sigaltstack's ss_base field to ss_sp to match XPG4.2 and
...
traditional usage.
1996-01-04 22:21:33 +00:00
7e01b868cc
It's safe to use <dev/ic/ncr5380*.h> now.
1996-01-01 22:51:26 +00:00
e9d1c5366d
ncr5380sbc attribute is now defined in sys/conf/files.
1996-01-01 22:48:55 +00:00
3da4b2a160
The IST_* and IPL_* constants are not bus-specific; don't treat them as such.
...
Change splimp -> splnet in Ethernet, ARCnet, and FDDI drivers.
1995-12-24 02:29:35 +00:00
ce000f04ef
Remove deprecated cpu_setstack().
1995-12-21 05:01:32 +00:00
de6dad9228
Move bcopy/ovbcopy/memcpy into m68/m68k/copy.s, which is used by all
...
m68k ports already anyhow. No use in keeping 6 identical copies of this
function around.
1995-12-11 02:37:55 +00:00
9ca6a401eb
Use the MI LANCE code.
1995-12-10 08:46:05 +00:00
0e0ac5ed68
cpu_fork() now returns void.
1995-12-09 04:37:23 +00:00
86f10d8343
Switch to ncr_si (will just do PIO for now) and cleanup
1995-11-17 23:31:11 +00:00
0ee10ff487
Give translated label a valid magic number
1995-11-17 23:30:19 +00:00
c01eb77976
cosmetic
1995-11-17 23:29:30 +00:00
5d5c8d0d4b
Latest, greatest version of the new NCR driver.
...
DMA works! Interrupts work! Disconnect/reselect works!
To be paranoid, leave that all disabled for now...
1995-11-17 23:27:41 +00:00
6b20139b41
Add copyright
1995-11-17 23:24:56 +00:00
92b8a2d9e5
just cleanup
1995-11-17 23:23:44 +00:00
70065d9d16
Fix a comment while I'm here...
1995-11-10 22:05:52 +00:00
01655dec81
Need to define KERNTEXTOFF for kvm_mkdb
1995-11-10 22:04:48 +00:00
3dcdca7c52
Allow unit != 0
1995-11-10 21:59:30 +00:00
3c996d6b06
ufs ==> ffs
1995-11-07 23:01:40 +00:00
7ff18ba0a2
The xy goes on VME16, not VME32.
1995-10-30 21:15:40 +00:00
1195faa6f4
Add the function isbad(), needed by xd/xy drivers.
1995-10-30 20:59:27 +00:00
b3a6cbaeb0
New from Chuck Cranor: drivers for SMD disks!
...
xd: Xylogics 753/7053 SMD disk controller
xy: Xylogics 450/451 SMD disk controller
These now compile, but have not been tested.
1995-10-30 20:58:04 +00:00
93d0f65970
New SCSI driver for the NCR5380, by David Jones.
...
Does DMA with interrupts. Much faster than our old
driver which did only PIO transfers. (Thanks David!)
Could be used on the amiga, and probably others...
1995-10-29 21:19:06 +00:00
1e3a9a42c6
Fix previous change that broke kd console
1995-10-29 04:15:59 +00:00
014044ef1a
Fix formatting
1995-10-28 20:43:49 +00:00
57a52744c1
Fix names (vtrace ==> sys_vtrace, etc.)
1995-10-27 15:58:23 +00:00
f966527839
Work around the LANCE Rev. C bug in a way that does not cause error
...
messages when BPF puts the interface in to promiscuous mode.
1995-10-27 15:53:39 +00:00
f2345fb358
Use correct size access (char,short,int) in db_read_bytes, db_write_bytes
...
otherwise access to some device registers will give misleading results!
(I learned this the hard way while debugging the NCR SCSI driver...)
1995-10-23 18:40:35 +00:00
126ecc3dda
Explain why sun3_context_equiv() can not just call set_segmap_allctx().
1995-10-17 23:16:40 +00:00
9182ffe624
Get rid of an extra twiddle() call (ufs.c does it.)
1995-10-17 23:07:19 +00:00
ca022f8909
Re-write of tapeboot, using a "rawfs" abstraction to hide the fact
...
that the device only supports block access. (Even works now!)
1995-10-17 22:58:10 +00:00
6af0af5daf
Change the interface to prom_iopen() slightly, for tapeboot.
1995-10-13 21:44:57 +00:00
52f39566b5
Add tapeboot, make ${SA_PROG}.bin padded to a block boundary.
1995-10-13 21:44:08 +00:00
c4e07b055f
Bump version number.
1995-10-13 21:33:09 +00:00
c890f5c659
Boot program to help load tape kernels.
...
(You can even choose a tape segment!)
1995-10-13 21:27:30 +00:00
df737690d7
Remove (again) things accidently revived by cvs tag...
1995-10-13 19:37:06 +00:00
22bcf4e552
New function: set_segmap_allctx()
1995-10-10 21:38:56 +00:00
1b2cf12fa7
Need to use set_segmap_allctx() on kernel-space segments.
...
(Thanks again to David Jones!)
1995-10-10 21:37:29 +00:00
4575a77421
Get rid of things now in libkern: bzero, bcmp, strlen
1995-10-10 21:35:42 +00:00
464d1686fd
sysarch --> sys_sysarch
1995-10-10 21:34:50 +00:00
127019022a
SUNOS_SYS_sunos_sigreturn -> SUNOS_SYS_sigreturn
1995-10-10 21:33:33 +00:00
f1b8ad3645
New function: set_segmap_allctx()
1995-10-10 21:29:02 +00:00
dda519e3d9
The previous hack to save two instructions when the
...
return value of splx() was ignored did not prevent the
optimizer from re-ordering the asm statements! (Yikes!)
Revert this to the old, single asm statement method.
Thanks VERY MUCH to David Jones for finding this!
1995-10-10 21:28:00 +00:00
facfdf5c60
Use sys/scsi/files.scsi
1995-10-10 21:25:29 +00:00
fa87e5bdfc
Minor cleanup re. Debugger() calls...
1995-10-08 23:48:22 +00:00
90af367f9e
Make arpintr() call conditional on NETHER
1995-10-08 23:47:34 +00:00
48500ffdd6
Add rd, xd, xy. Sort the includes.
1995-10-08 23:46:27 +00:00
0ed357402a
Fix a big "oops" (Many thanks to David Jones!)
1995-10-08 23:45:10 +00:00
3d587a6700
Link this -static
1995-10-08 23:44:02 +00:00
09cbbafa0a
Minor cleanup.
1995-10-08 23:42:58 +00:00
f5bcca1fab
Machine-dependent part of the new RAM-disk driver.
...
This module lets one build a stand-alone kernel.
1995-10-08 23:42:42 +00:00
1b6586b2bb
Note that this should be merged with dev/ic/i82586reg.h
1995-10-08 23:41:36 +00:00
13fa3c4fe6
Temporary hack to restrict open to root or the
...
same UID as the session attached to /dev/kd
1995-10-08 23:40:42 +00:00
2d50d2a6b9
Add RAMDISK, move some things around.
...
Add rd*, xd*, xy* (only rd is done).
1995-10-08 23:38:41 +00:00
245f292fed
Prefix names of system call implementation functions with `sys_'.
1995-10-07 06:25:19 +00:00
995b4710b8
Correct mapinfo for Multibus PROM devices.
1995-09-26 21:30:19 +00:00
50201d2bb5
Fix comment, add copyright.
1995-09-26 21:29:25 +00:00
3c868e07f9
New DVMA interface, and various cleanup.
1995-09-26 04:01:53 +00:00
48fc6c37a0
Correct child_return() so child is charged for its cpu time.
1995-09-26 03:53:46 +00:00
23ee56022d
Cleanup, and catch up with libsa changes.
1995-09-23 03:42:17 +00:00
13d9b9d700
Sync up with the sparc version.
1995-09-23 03:40:28 +00:00
970f736653
Compile the kernel with -Werror -fno-builtin.
1995-09-19 23:54:29 +00:00
7d7396c414
Make system calls conform to a standard prototype and bring those
...
prototypes into scope.
1995-09-19 22:53:47 +00:00
29053c58b2
SA_ONSTACK --> SS_ONSTACK
1995-09-01 20:05:59 +00:00
356b42ba70
inclide -> include; PR #1400
1995-08-22 19:39:23 +00:00
acbfd7b67d
Fix vectored interrupts, and do autovectored ones similarly.
1995-08-21 21:37:36 +00:00
35a5b206df
If a swap entry is being used as root, do not swap there.
1995-08-21 21:36:25 +00:00
66dcd8fd69
Add entries for the ccd.
1995-08-17 17:40:42 +00:00
238eb3d35a
Correct a comment re. splnet
1995-08-15 17:41:38 +00:00
2666f17777
SCSI bus phase not valid until REQ is true (Fix from David Jones).
1995-08-14 20:00:00 +00:00
a38e73b5a7
splnet --> splsoftnet
1995-08-13 00:32:02 +00:00
9a5c8b5f89
Add splsoftnet().
1995-08-13 00:31:28 +00:00
80d7b0695a
minphys() functions really should return void.
1995-08-12 20:30:45 +00:00
d9678d59b2
Fix up DVMA-related confusion. Disk boot now works.
1995-08-12 18:38:30 +00:00
67ad80c6ed
Not really useful anymore.
1995-08-08 22:28:32 +00:00
75dc312695
Do errno translation when emulation needs it.
1995-08-08 21:11:47 +00:00
ee8dd73508
Make this link with PMAP_DEBUG turned off.
1995-08-08 21:10:18 +00:00
73d4eba4cf
Only allow mmap in "managed" RAM for now.
1995-08-08 21:09:01 +00:00
fafc2a527a
Fix signed/unsigned comparison in dumpconf().
1995-08-08 21:07:52 +00:00
106e4e8c4a
Fix "oops" line that was supposed to increment tv_usec
...
(just to make sure time keeps moving 8^)
1995-08-08 21:05:48 +00:00
dac3687c31
Make it work with obj dirs. (from Jason Thorpe)
1995-08-08 21:02:04 +00:00
7eda63e726
Get rid of libnet
1995-08-08 21:00:00 +00:00
b090a64678
Add bcea[] here now that is is gone from arp.c
1995-08-08 20:59:07 +00:00
59078e8a4b
Cosmetic (fix order)
1995-08-08 20:57:51 +00:00
239821855f
Add default value for SHMMAXPGS (from Jason Thorpe - fixes PR#1220)
1995-08-08 20:56:45 +00:00
c96c328a9d
Use old-style function definitions (like the sparc driver).
1995-08-08 20:54:08 +00:00
2a3eef935e
Improve handling of a device that "sits on" the bus (from Jason Thorpe)
1995-08-08 20:53:16 +00:00
9ede017ccb
Set TIMEZONE=0, DST=0 (which is correct for the hardware clock).
1995-08-08 20:51:26 +00:00
ffe4785a58
update SCSI minphys routines' definitions to match standard minphys()
...
definition and usage.
1995-07-24 07:33:32 +00:00
ca95fcc2e3
Put back SYMTAB_SPACE so the distributed kernels will have symbols when
...
loaded by the SunOS boot program. Our netboot works, but our ufsboot
still has a problem on the 3/260, so keep SunOS boot support for now.
1995-07-07 16:01:22 +00:00
090fdb11cf
Do not advance esym if the SYMTAB_SPACE option is set.
1995-07-05 19:36:48 +00:00
2d867f9de5
SUBDIR=stand
1995-07-05 19:04:23 +00:00
a8adf7421b
Add code to netintr to call pppintr.
1995-07-04 12:37:42 +00:00
7263209ce6
Make each disk and tape driver define its own read and write functions.
...
Deprecate rawread() and rawwrite() completely. Remove d_strategy from cdevsw to
force the abstraction barrier.
1995-07-04 07:15:28 +00:00
365e8c62da
Remove temporary hack (now merged into src/sys/lib/libsa)
1995-07-03 02:56:52 +00:00
5cd60330a9
Remove temporary hack (../libnet)
1995-07-03 02:53:55 +00:00
c4746effe0
Correct !DDB console abort (thanks to David Brownlee)
1995-07-03 02:52:13 +00:00
38c03f8581
Add ${LIBKERN} ${LIBCOMPAT} to SYSTEM_DEP so they are built.
...
Move ${DEBUG} from ${CC} to ${CFLAGS} for compatibility.
1995-07-01 00:51:15 +00:00
2b71eae2c7
note that most of dev/ic's contents have changed names
1995-06-28 04:30:30 +00:00
c83f9c5568
remove unused cpu_exec() definitions. moved "broken swap" markers, for
...
ports that still need it, to types.h.
1995-06-28 02:55:18 +00:00
e80271fbe0
Get things from libsa now.
1995-06-27 15:57:13 +00:00
29b61e2253
Add/correct some cache-flush logic to deal with the fact that the
...
VAC has ref/mod bits that need write-back treatment.
1995-06-27 14:44:47 +00:00
d5761f14d9
Fix uses of btoc() which requires an unsigned arg.
1995-06-27 14:42:34 +00:00
6b6502194f
Fix warnings about setjmp arg.
1995-06-27 14:40:14 +00:00
f82c63a641
Remove temporary __BDEVSW_DUMP_OLD_TYPE (our dumpsys is safe 8^)
1995-06-27 14:38:22 +00:00
6548befa4f
Nuke user-mode DELAY() macro.
1995-06-27 14:37:22 +00:00
3a59870c12
Leave modem control lines in correct state on interrupted open.
...
(From sparc/dev/zs.c)
1995-06-27 14:36:20 +00:00
f872dedb62
Catch up with net/if.h changes
1995-06-27 14:34:32 +00:00
2d49c3885b
clean up definitions of ctod(), dtoc(), ctob(), btoc(), btodb(), and
...
dbtob(). remove unused definitions of ctos(), stoc(), and dtob().
1995-06-26 06:55:38 +00:00
1c0be437b1
define __BDEVSW_DUMP_OLD_TYPE for ports where it's true. clean up
...
some m68k ports inclusion of common header.
1995-06-26 05:13:37 +00:00
8d8973280c
Makefile.`arch`: - Add -lcompat
...
- Change clean: target to be a double dep one,
so libraries can use the clean target too
- Add genassym to the clean targets
1995-06-24 20:48:36 +00:00
55fbbc705d
Wrap with #ifndef _XXX_FLOAT_H_/#define _XXX_FLOAT_H_/ ... /#endif.
1995-06-20 20:45:22 +00:00
8f62c773e8
don't assume the f_fsnamelen is nul-truncated or longer than MFSNAMELEN
1995-06-18 14:45:14 +00:00
7d0e5e8589
Use ${.CURDIR} in S macro definition so makefile works with obj directories.
1995-06-16 07:23:02 +00:00
d82ae8cad9
Fix cpuspeed values for Carerra and similar.
...
Enable the virtual address cache on the 3/260
1995-06-13 22:21:40 +00:00
b029c12ac1
Moved delay2us to param.h (now an inline function).
1995-06-13 22:16:38 +00:00
cd13e583aa
Provide delay2us as an inline and make it reasonably accurate,
...
but conservative (long) by a factor of about 1.25
1995-06-13 22:14:24 +00:00
64543c95b6
Fix several missing (and REQUIRED) calls to ZS_DELAY()
1995-06-13 22:11:33 +00:00
11ab4427ec
Fix warning about setjmp arg
1995-06-13 22:06:58 +00:00
66f34029e5
Leave pseudo-device prom in for now (even though it doesn't work)
...
so config will create prom.h
1995-06-12 19:05:43 +00:00
914666b4f0
Temporary! Should be merged into libsa...
1995-06-09 22:26:18 +00:00
7fb30c51c8
Add install target, etc.
1995-06-09 22:24:06 +00:00
f950c931e0
Oops, that was a binary...
1995-06-09 22:23:44 +00:00
a4310ae56e
Several fixes and cleanup: make close work; stop in prom if debug mode...
1995-06-09 22:23:01 +00:00
e4a7bfeef8
cosmetic
1995-06-09 22:21:00 +00:00
gwr