34329d9139
regen.
2000-03-16 18:28:11 +00:00
348fff03fb
add I/O DATA USB-ET/TX USB ethernet adapter.
2000-03-16 18:27:21 +00:00
9eb76252d0
Regen.
2000-03-16 16:48:59 +00:00
8a8e062c16
cards for if_awi:
...
Add AirSurfer Pro
Change the name for AMD Am79C930. The same CIS strings are used
both for Melco WLI-PCM and NTT-EL SS Magic.
2000-03-16 16:38:41 +00:00
afaa5767a3
Match shutdown msg with that of cac.c.
2000-03-16 15:13:05 +00:00
534da504b9
Cosmetic change.
2000-03-16 15:09:59 +00:00
a81a812b50
Remove unneeded field in 'struct cac_ccb'.
2000-03-16 15:07:22 +00:00
70063dc527
Driver for Compaq array controllers and disks (cac(4)/ca(4)).
2000-03-16 14:52:22 +00:00
6e0e3d609f
Replace LE() macro with le32toh()/le32toh().
2000-03-16 12:40:51 +00:00
1a774a9979
Set bus_intr to ahc_pci_intr.
2000-03-16 10:34:33 +00:00
f44ddd61a9
Do bus-specific interrupt handling (i.e. ahc_pci_intr) via a bus_intr
...
field in the softc, instead of relying on NPCI > 0. This would
prevent things from compiling if PCI buses were in the config file,
but ahc was attached only to something else than the PCI bus.
2000-03-16 10:33:45 +00:00
f52c9620bc
Place 34 by 80 console at the center of screen.
2000-03-16 05:50:57 +00:00
0b765ee6f8
Retain rendering performance lossage by rasops, but suffering
...
flexibility in turn; this renderer is 2B stroke (less than 16 pixel
width) font only. If 1B stroke (less than 8 pixel width) font is
ever supported, the font data should be converted into 2B stroke
during font initialization process. 'wsfont_realize()' is to be
proposed in order to have 'CPU and/or accelerator hardware friendly'
format to squeeze maxinum performance.
2000-03-16 05:48:28 +00:00
aa8b5ebd93
On initialization failure, free all the storage allocated to store
...
component pathnames rather than the last one.
2000-03-16 03:54:01 +00:00
5336e37153
Make this file just compiles again.
...
XXX Don't expect to work yet. It fails even to link depending on your
XXX kernel config file.
2000-03-16 03:06:51 +00:00
c99c03da4d
Make the USB event queue longer. Mine overflows before the (user-land)
...
event handler has started. But then I have about 25 devices connected. :)
2000-03-16 00:46:38 +00:00
1a9f0619fd
Fix thinko in the handling of FORCE_SHORT_XFER so that it actually
...
transfers a 0 length package instead on munging the whole transfer.
The aue driver works now.
2000-03-16 00:41:50 +00:00
f9fd27ea3c
Fix an uninitialized variable. From Krister Walfridsson <cato@df.lth.se>
2000-03-15 22:41:29 +00:00
499e5cba01
Fix some uninitialized variables. From Krister Walfridsson <cato@df.lth.se>
2000-03-15 22:40:30 +00:00
411a31adb2
- Go to splimp() when sending the rtsock message regarding link status.
...
- Would like to notify protocols if a link goes up or down, to e.g.
restart Duplicate Address Detection, etc. Add a comment to this
effect.
2000-03-15 20:34:43 +00:00
c38405d33d
Add power management support to the `tlp' driver. The battery on my
...
laptop lasts a whole lot longer now.
2000-03-15 18:39:50 +00:00
fbc4dbb7ac
Catch up to rearranged aic7*.h files
2000-03-15 07:17:06 +00:00
220005d941
Eliminate unused sc_cookie field of struct ioasic_softc.
2000-03-15 03:07:44 +00:00
14620f1eee
PCI frontend for new ahc driver.
2000-03-15 02:33:52 +00:00
1e4647a15b
New ahc driver, a port of Justin Gibbs' FreeBSD driver. This adds
...
support for the U2W chips, and U160 controllers.
2000-03-15 02:08:28 +00:00
085f68836e
Common code for EISA and VL frontends for the ahc driver, split off
...
by Noriyuki Soda when updating for the new ahc driver.
2000-03-15 02:06:18 +00:00
7df6153163
Update EISA frontend for new ahc driver (done by Noriyuki Soda).
2000-03-15 02:04:43 +00:00
2da1f00fcd
Update cardbus frontend for new ahc driver.
2000-03-15 02:03:51 +00:00
d025f5705e
Add a couple of defines/aliases for messages.
2000-03-15 02:02:37 +00:00
b6f22443bb
Remove ancient code.
2000-03-15 00:38:40 +00:00
1e1f1f3b3b
Make sure the USB event thread discovers all devices first time it call
...
usb_discover().
It should now be possible to have the root NFS mounted over a USB Ethernet
adapter.
2000-03-14 23:13:12 +00:00
797ac20035
Add power management hooks.
2000-03-14 21:20:51 +00:00
60ed7cfb2b
Simplify the code a bit.
2000-03-14 10:26:10 +00:00
70b8e188ee
Don't think that a card is inserted if there is a card already in the slot.
...
Note that powerdown hook calls pccbbintr so that it detect card insertion or
removal during suspension.
2000-03-14 10:23:16 +00:00
d454505125
Cosmetic change.
2000-03-14 10:20:09 +00:00
65da099cb1
Unnecessary to enclose device driver body with #if NASC > 0.
2000-03-14 08:23:29 +00:00
2eb68c00d2
Respect video console colour designation by configration file.
2000-03-14 08:04:06 +00:00
80c0893a8b
Switch to improved flexible video console text rasterizer provided by
...
rasops and wsfont.
2000-03-14 06:25:21 +00:00
ae493d8845
Resolve LP64 issues.
2000-03-14 04:23:14 +00:00
297455cbe2
Pick I/O before Memory space.
2000-03-14 02:08:21 +00:00
e58bd0c365
Regen
2000-03-14 01:46:56 +00:00
67027b1103
Add product ids for some VIA Technologies VT82C686A southbridge devices.
2000-03-14 01:45:11 +00:00
b3cf850817
Fix typos in comments.
2000-03-14 01:29:30 +00:00
95054da1a1
Fix doubled 'the's in comments.
2000-03-13 23:52:25 +00:00
49389b9817
tabbing consistency on the 3c1 entry
2000-03-13 23:36:02 +00:00
e2850da406
Regen.
2000-03-13 21:17:32 +00:00
5402c76d3e
add an entry to the product table for the 3C1. This seems to work,
...
at least as necessary to pull out the MAC address, etc. Not actually
tested xmit & rcv yet.
2000-03-13 20:32:28 +00:00
8409d84d62
regen
2000-03-13 20:31:23 +00:00
00a2570a2e
Add 3com Megahertz 3C1 10Mbps LAN CF+ Card
2000-03-13 20:30:24 +00:00
f91ce51084
Regen.
2000-03-13 17:24:14 +00:00
e22c4b3d1f
Add a bunch of Compaq array controllers.
2000-03-13 17:23:26 +00:00
9f0c40cff1
Add Palm serial adapter.
2000-03-13 17:14:27 +00:00
112137cd30
Added Artec/Ultima A6000C scanner to the quirks table (no LUNs).
2000-03-13 09:56:26 +00:00
035f58c823
HPC/PsPC keyboard types.
2000-03-13 01:46:44 +00:00
a7f01b4816
Fix DMAADDR():
...
Return the mapped address of the block, not the kernel address.
A uhci device now finds devices on my pc164.
2000-03-12 23:10:29 +00:00
b8b53d87db
Avoid accessing the device if it is dying.
2000-03-12 21:57:50 +00:00
ce6f0100c1
Remove extra \n in attach message.
2000-03-12 19:16:48 +00:00
347a1f736e
Reverse the mapping of the control/status registers. Use I/O before MEM.
...
My card works now on a TI1220 chipset. Approved by Jason.
2000-03-12 17:05:23 +00:00
e750135b5e
A few things:
...
* Initialize PCIC_INTR and PCIC_CSC_INTR on all chips, not just TI.
* Leave card detect interrupts enabled in PCIC_CSC_INTR. (This requires
reading PCIC_CSC in the interrupt handler on some chips, so do that too.)
* Leave PCIC_INTR_ENABLE set, as some chips require this to post card detect
interrupts while in PCMCIA mode.
* Leave PCIC_INTR_RESET (which is inverted) set at all times *except* when
powering up a socket, as some chips will use it to drive RESET# low even
while a CardBus card is in the slot.
This makes PCMCIA and CardBus cards works with some TI chips. Cross-checked
with a Toshiba ToPIC 95B.
2000-03-12 11:31:53 +00:00
30f73f1831
support bus probes a la "badaddr" and VME interrupts, fix error handling
...
after mapping problems
2000-03-12 11:23:06 +00:00
e135f943fa
add support for DMA mapping, bus probes ala "badaddr" and VME interrupts,
...
improve diagnostic output
2000-03-12 11:21:02 +00:00
1203bdcbb3
Bus_space-ify TGA register accesses.
...
(raster operations are still using pointer-based access)
2000-03-12 05:32:29 +00:00
058d87a788
Add a new frame buffer identifier for the hpcmips.
2000-03-12 04:59:24 +00:00
602faa83a8
Do *not* fiddle with the serial/parallel IRQ mode selection on TI chips.
...
Without extensive probing, we cannot possibly know that we're doing the right
thing.
Also some stylistic changes.
2000-03-12 04:34:29 +00:00
781b535703
Revert the previous change.
2000-03-12 04:27:12 +00:00
c7a13f6116
Revert the previous change. It does not match the commit message *and* was
...
incomplete (and probably quite broken).
2000-03-12 04:25:57 +00:00
5c64f2064d
Add missing sc_pil_intr_enable member to pccbb_softc.
...
XXX Double check this, please. The code appears to only use it as a
boolean, but...
2000-03-12 01:15:04 +00:00
27fe6c0aee
regen
2000-03-11 16:13:39 +00:00
d01b78affd
Add id for Alliance AT25, as sent by Dave Sainty in kern/9596.
2000-03-11 16:13:14 +00:00
2d525b16dd
The shortened 1371 reset delay in revision 1.32 doesn't seem to be
...
quite enough for my 1373, so increase it some.
2000-03-11 06:42:37 +00:00
b58bf3c7bb
Don't reset cp->hw_ok ro 0 when cp isn't initialised in cy693_chip_map()
...
(used only in failure case). Pointed out by Wolfgang Solfrank.
While I'm here correct indentation.
2000-03-10 21:21:48 +00:00
173f823e3a
Only apply power on 3.3 V CardBus card (there are no 5 V CardBus card.)
2000-03-10 11:08:49 +00:00
7e044bd4e5
Move pretty much all of the PCI configuration goo into a separate
...
function.
2000-03-10 07:26:41 +00:00
370bc1832b
Normalize the copyright notice (TNF copyrights should *always* match
...
the appropriate template), and run through indent.
2000-03-10 07:11:47 +00:00
0fef451485
Pull the code that take the Tulip out of powersave mode into a separate
...
function.
2000-03-10 06:55:09 +00:00
f76ce3b475
Only poll for bell completion if we're calling in from cnbell(). Fixes
...
a problem reported by Lennart Augustsson.
2000-03-10 06:10:34 +00:00
cf32e2713c
Adopt the macro name change of if_ieee80211.h.
...
also fixed the value for receiving packets in infrastructure mode,
while no one has been tested with.
2000-03-10 05:47:42 +00:00
0391e3393f
Slight change to the SROM size printf.
2000-03-10 02:46:39 +00:00
9f86839658
change Mb/s to MB/s (Megabit to megabyte).
2000-03-09 23:19:26 +00:00
c70220f2a2
Move PCIIDE_CHANNEL_NAME macro to pciidereg.h.
2000-03-09 20:26:31 +00:00
0542cec055
put "#ifdef __alpha__" around "alpha_mb()" calls
...
(I know the driver is useless without console initialisation, but it
should at least compile.)
2000-03-09 18:40:36 +00:00
24ea2caf14
regen
2000-03-09 09:53:03 +00:00
3abb87c0f5
Add Conexant SoftK56 PCI Software Modem, Sony CXD3222 OHCI i.LINK(IEEE 1394)
...
PCI controller, Sony Memory Stick I/F Controller
Ids send by John Hawkinson in kern/9588
2000-03-09 09:50:49 +00:00
7e567738f2
support rfact. use manufac. suggested resistor values by default
...
clean up some comments
2000-03-09 04:20:58 +00:00
7e6d7b8613
use bus independent probe
2000-03-09 04:19:03 +00:00
e0d3ede01c
Get the status right when a polled transfer times out.
2000-03-08 15:34:10 +00:00
07574c3239
Add a debug message.
2000-03-08 15:33:38 +00:00
45f32a77f5
Clean up code a little and add some more debug messages.
2000-03-08 15:33:24 +00:00
af00b7b880
split probe into generic and bus specific
2000-03-07 18:39:14 +00:00
4398e0bd07
Fix CardBus device number. Though CardBus device number should be 0,
...
the value of bridge's function number was assigned to the device
number.
2000-03-07 09:36:52 +00:00
c1b54794fc
Add missing `cnt++'.
2000-03-07 03:37:39 +00:00
7ce8a9f46b
Also, fix indentation in previous commit.
2000-03-07 03:34:52 +00:00
7c57ac56d7
Cleanup a couple of function declarations. No functional changes.
2000-03-07 03:09:47 +00:00
51ffb0924c
Create a new rf_close_component() to handle vnode operations for closing
...
components. Teach rf_UnconfigureVnodes() how to use it, and tell
the copyback and reconstruction code about it too.
2000-03-07 02:59:50 +00:00
ddebc1cad0
Move rf_UnconfigureVnodes to rf_netbsdkintf.c where it will be more at home.
...
Add prototype to rf_kintf.h, and nuke old prototypes from rf_disks.c and
rf_driver.c .
2000-03-07 02:28:05 +00:00
33a55d022b
rf_ protect the component label print routine, and make it more easily
...
available to the rest of RAIDframe.
2000-03-07 02:12:13 +00:00
dbf5d1f7a6
Nuke unused code.
2000-03-07 01:54:29 +00:00
dfaacf6eab
Fix bug in previous.
2000-03-07 01:08:55 +00:00
8f8714687b
Reenable the code that clears SLEEP and SNOOZE from the CFDA register.
2000-03-07 01:08:47 +00:00
6cc1408bca
Only print SROM size if TLP_DEBUG.
2000-03-07 01:06:12 +00:00
4887635a10
A few things:
...
* Take advantage of the tulip_read_srom() changes.
* Don't frob the so-called `CFDA' register. We're really looking for the
PMCSR, which is in a different location anyway.
* Don't panic if we detach an interface for which we never called tlp_attach().
2000-03-07 00:43:36 +00:00
5eee9ca94c
Determine the size of the SROM by probing the chip using the standard Microwire
...
protocol. Eliminates the need for srom_quirks and some other trash.
2000-03-07 00:39:17 +00:00
064b1bd2e9
Fix obvious typo.
2000-03-07 00:33:13 +00:00
8b13d21260
Do a CARDBUS_BM_ENABLE to be sure.
2000-03-07 00:32:52 +00:00
de8398315a
Fix an obvious bug that caused I/O space to never be freed.
...
Also, don't use rbus_space_free() directly.
2000-03-07 00:31:46 +00:00
bcdcb370e5
Called the power function even for 5V cards. This at least gives the power
...
a chance to stabilize before we frob the card.
2000-03-07 00:30:57 +00:00
42144199a1
- Make the pcppi and pckbd drivers cooperate a little more -- pckbd provides
...
a call to hook up a bell-ringer (since the keyboard itself has no bell).
This eliminates the need for #ifdefs for the bell-ringer in the pckbd
driver.
- Add cnbell() support to pckbd.
2000-03-06 21:40:08 +00:00
da4dc67d3e
Add cnbell() support.
2000-03-06 21:37:16 +00:00
a183d34f04
- Implement cnbell() -- ring the console bell. The cn_bell entrypoint
...
is optional.
- Add cn_bell to statically allocated consdevs as appropriate.
2000-03-06 21:36:05 +00:00
91c44a72b8
Set ifp->if_baudrate as appropriate.
2000-03-06 21:02:37 +00:00
a6f861574a
No longer necessary to futz with ifp->if_baudrate here.
2000-03-06 21:02:00 +00:00
41aade98ba
Generate better error codes on bulk write.
2000-03-06 20:59:17 +00:00
119a2a3a80
Remove irrelevant comment.
2000-03-06 20:58:39 +00:00
e0cb11e30e
Use macros from usb.h instead masking out bit explicitely.
2000-03-06 20:58:18 +00:00
ad61d101be
Factor out the tick handling code into a common function, and send
...
rt_ifmsg's when the link speed or link status changes.
2000-03-06 20:56:56 +00:00
c34cce88c4
Add support for the AMD 756 DMA/UDMA IDE controller, provided in
...
PR kern/9536 by Dave Sainty.
2000-03-06 18:02:26 +00:00
68484a4ad9
- Remove redundant assignment.
...
- Don't disestablish shutdown hook if we can't establish it.
- Noneed to manage resouces individually.
2000-03-06 10:31:27 +00:00
9066b12bbb
Remove redundant assignment.
2000-03-06 10:21:46 +00:00
d97becf28e
Make Creative Soundblaster PCI 128's work -- from Masahiro Ishiyama
...
Note that on device close, there's a sharp pop that probably should be fixed.
Note also that the device is hanging the machine at times for brief
periods inside audio.c::audiogetinfo(), but I haven't yet figured out
why.
2000-03-06 03:18:11 +00:00
e65044e30d
Get rid of hook for dk_establish() - pmax will now use device_register().
2000-03-06 03:08:32 +00:00
c74ea28746
Support the W89C940F alternative ID.
2000-03-06 03:07:08 +00:00
9e870c5a88
Regenerate from pcidevs.
2000-03-06 02:32:31 +00:00
1a0eab6fa3
Add SYMPHONY 83C553 PCI-ISA bridge.
...
Add alternative ID for Winbond W89C940F.
2000-03-06 02:31:19 +00:00
d610ec4cb0
Add Norwegian keymap from Haavard Lygre.
2000-03-05 08:56:53 +00:00
23af6e53fd
Moved things around a bit so that TGA2 can be used as a console.
...
Addresses PR: port-alpha/9542
2000-03-05 07:57:52 +00:00
1dfdd10eae
I got the mode sense bits of the monitor wrong they needed a twiddle (~).
2000-03-05 02:30:57 +00:00
c98328e9df
Regen from "pcidevs".
2000-03-04 13:24:24 +00:00
947ec630de
Add AMD Athlon chipset related devices. Patch supplied by Dave Sainty in
...
PR kern/9533.
2000-03-04 13:23:26 +00:00
f939818426
Added basic TGA2 support to the TGA driver. Abstracted the RAMDAC
...
code out into ../ic/bt485.c. Disabled tga_bt463.c, which we don't
currently support.
2000-03-04 10:27:59 +00:00
b16807c51a
Graphics card independant Bt485 code, derived from dev/pci/tga_bt485.c.
2000-03-04 10:25:57 +00:00
c4019af322
Definitions of standard TGA monitors as used by DEC.
2000-03-04 10:25:07 +00:00
7428bb6ffd
Definition of struct monitor, which contains syncs, and dot clocks.
2000-03-04 10:24:34 +00:00
fec44d6f55
Header for a generic RAMDAC that can be reused between different
...
graphics cards.
2000-03-04 10:23:39 +00:00
1231bd6d14
Umm... don't allow attempts to configure the same RAID device multiple times.
...
The check was there, but the return() was missing :(
2000-03-04 06:03:21 +00:00
3b06f6f887
Fix boot device detection. Device probes are not done when adapters are
...
configured, but after all adapters have been configured. When multiple
adapters are present, only the last configured adapter could be matched
to the boot device slot. The adapter attach routines now check if that
adapter slot matches the boot device slot and saves the softc pointer
for that controller. Then when the disks are configured, dk_establish()
matches the appropriate controller.
2000-03-04 05:43:51 +00:00
0049933f0f
Reorganize some comments.
2000-03-04 04:22:34 +00:00
194aba4e41
Garbage collect the (already disabled) "random" queue type.
2000-03-04 03:27:13 +00:00
612e2e8f92
Nuke an unneeded #define.
2000-03-04 03:22:17 +00:00
d8bf2eb8ef
- we didn't write enable toe config1-3 registers before trying to set the
...
media.
- read out original settings to find out what the defaults (EEPROM) for this
board were, instad of hardwiring to auto.
XXX the first might need further refinement. At least on my boards, 10baseT
doesn't work for 10baseT, only AUTO.
2000-03-03 21:37:18 +00:00
88a8d06a0b
Use the common disk allocation code, rather doing things the old way.
2000-03-03 03:47:17 +00:00
142175b1a1
Minor formatting cleanup.
2000-03-03 03:10:03 +00:00
7b1139520e
More minor cleanup.
2000-03-03 02:04:48 +00:00
87f46374bb
Minor cleanup. No functional changes.
2000-03-03 01:46:36 +00:00
2dda67d4a2
Fix typo in argument to ratecheck().
2000-03-02 15:49:29 +00:00
d6c4ac7ff2
Use ratecheck() to limit error messages on disconnect.
...
Break out some common functionality.
2000-03-02 12:37:50 +00:00
e924f6f853
Minor cleanups.
2000-03-02 10:29:22 +00:00
48721f291a
Fix typo and thinko in previous commit.
2000-03-02 05:54:22 +00:00
027db8bf87
Add ifmedia support so that dhcp happy. Also, add nwid support.
2000-03-02 05:00:47 +00:00
a5921b902e
Check if device is active in the interrupt handler and the one second
...
tick handler.
2000-03-02 01:21:56 +00:00
285a315e99
Simplify the winlist code.
2000-03-01 23:40:26 +00:00
ac1b683642
Amend previous; pay attention to EX_CONF_MII on deactivate, too.
2000-03-01 20:53:11 +00:00
448dfa4249
Only detach PHYs if we have MII in the first place, and remove a bunch
...
of #if 0'd code which was copied from the Tulip driver.
2000-03-01 20:51:50 +00:00
54e0e80815
Cosmetic change.
2000-03-01 20:50:56 +00:00
08483fcddc
When unmapping these on detach, pass the BAR to unmap (not the type of
...
the BAR!!)
2000-03-01 20:50:37 +00:00
3218dd992d
Protect the use of bpf_mtap so bpf isn't needed.
...
aue: Limit the number of error messages at disconnect by using ratecheck().
2000-03-01 19:00:51 +00:00
ba4e755a9c
Change the cmd argument in {audio,mixer}_ioctl() to u_long.
2000-03-01 00:44:35 +00:00
7d05674ba7
Distinguish between device and interface classes.
...
(I finally found a document that said that they were different.)
2000-02-29 21:37:00 +00:00
a6a5be8ccf
This driver also handles the 3COM 3COM HomeConnect Ethernet USB Adapter
...
(3C460), rev 1.00/2.05
2000-02-29 19:08:09 +00:00
b95fbdaeb7
Regen
2000-02-29 19:07:33 +00:00
eff003f7ce
add product ID for 3COM 3COM HomeConnect Ethernet USB Adapter (3C460),
...
rev 1.00/2.05
2000-02-29 19:06:40 +00:00
8cde772948
Oops.. Need to note the parity status when we unconfigure.
...
Noted by Aaron J. Grier. (Thanks!)
2000-02-29 16:54:29 +00:00
c09a9a072f
Oops, pasto.
2000-02-29 11:14:46 +00:00
d788e0dbad
Make sure to initialize xs->req_sense_length (to 0). This appears to be
...
a historical leftover, and very few drivers actually look at it. But the
PCI `ncr' driver does, and if this field is not initialized to its default
value, that driver will fall over flat on its face when it attempts to get
sense data from a target.
2000-02-28 17:44:20 +00:00
32817a3257
WSMOUSE_SCALIBCOORDS had not worked because ioctrl code was wrong.
2000-02-28 12:34:31 +00:00
c627d45cc3
(fxp_init): don't clear the FXPF_MII flag as this results in a panic
...
when detaching
2000-02-28 10:16:17 +00:00
86ae2ab1fc
Add ADEV_NOSENSE quirk for HITACHI CDR-7730.
...
Patch sent by Hume Smith in kern/9489.
2000-02-28 09:46:25 +00:00
a87f80ad5f
Give the VPP bits better names.
2000-02-28 07:33:08 +00:00
17f933f6ce
Add missing break that hosed multicast.
2000-02-28 06:44:52 +00:00
d2b929f576
Fix naming think-o.
2000-02-28 05:30:19 +00:00
8841a11f4d
- Disestablish an interrupt if failed to enable the card.
...
- If card isn't enabled, just set given information into softc. Addresses
PR#9457.
- Some cleanups and cosmetic changes.
2000-02-27 23:10:51 +00:00
71df610aeb
Remove no longer necessary workaround for hpcmips.
2000-02-27 22:57:20 +00:00
10d9610df8
Make this driver actually work in NetBSD. From Castor Fu <castor@geocast.com>
2000-02-27 22:15:24 +00:00
7b4eccb432
Use DPRINTF for debug messages.
2000-02-27 21:06:55 +00:00
739151c214
Regen.
2000-02-27 20:44:22 +00:00
741c59a303
Add the QuickShot Strikepad game-pad.
2000-02-27 20:43:53 +00:00
45b36632c0
Add code (off by default) to keep track of the signal strength of the last
...
few packets received from different MAC addresses.
2000-02-27 20:40:42 +00:00
61cc77895b
Some minor cleanup to the probe code.
2000-02-27 20:01:05 +00:00
20e5cfa32f
Billionton Systems Inc. LNT-10TN card.
2000-02-27 11:15:47 +00:00
d386caeaec
regen.
2000-02-27 11:14:43 +00:00
663c327808
Add Billionton Systems Inc. LNT-10TN NE2000 Compatible card.
2000-02-27 11:14:03 +00:00
9a06ea04a2
Fix the same race condition while initializing the socket.
2000-02-27 03:25:03 +00:00
7794bfe183
Reorder the usage of intr_establish/intr_disestablish with respect to setting
...
the CSC_INTR register, to insure that the IRQ is not left floating and enabled
at any point. Eliminates stray interrupts during the IRQ probe.
2000-02-27 03:08:00 +00:00
8c46e74418
Nuke some debugging output that got left in by mistake.
2000-02-27 02:35:33 +00:00
82419f5ae9
Only mark the components as CLEAN if it's the last thing we're doing.
...
Marking them CLEAN earlier is (currently) asking for trouble.
(XXX This could have been done more elegantly.)
2000-02-27 01:50:22 +00:00
a3ae8af043
Allow a flag to be set to force polling for socket events.
2000-02-27 00:14:27 +00:00
16c31080a5
IT8368E legacy mode requires mode change between I/O access and
...
attribute memory access. XXX
2000-02-26 19:02:22 +00:00
d9c47013b2
Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on
...
the component auto-detection and auto-configuration of RAID sets.
Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files.
2000-02-26 17:35:33 +00:00
6f1701b01c
Put a lock on the pcic, to serialize access to the chip during event
...
handling. This is important when multiple cards are present when
the system boots, as we use tsleep now instead of delay in various
places (delay used to provide serialization by virtue of not causing
a context switch).
2000-02-26 17:24:44 +00:00
beecfd4814
cnw is 8bit-only card. map memory region as 8bit only.
...
(there are so many 8bit-only card fixes. don't we have some hint on cis tuple?)
From: feico
2000-02-26 05:34:43 +00:00
52169104c5
Fill in the softc's bus space tag (OOPS!).
2000-02-26 05:11:27 +00:00
78171a3a3e
I told them not to use IST_LEVEL here. Now PCMCIA works on my AS200. *sigh*
2000-02-25 20:48:22 +00:00
49f1a84ad6
Be even more careful about cleaning up the socket at boot time.
...
Also, nuke the windows when the socket is disabled. (They might be deallocated
and reallocated, and would thus cause a conflict.)
2000-02-25 20:45:43 +00:00
caa3932441
Minor cleanups. Remove extra debugging printouts.
2000-02-25 20:11:00 +00:00
21243f6205
- ignore the mod_counter when checking to see if a component fits with the
...
rest of an autoconfig set.
- minor cleanups
2000-02-25 19:56:56 +00:00
503220a18f
- ignore components whose mod_counter values are too low.
...
- noting the mod_counter for autoconfigured sets would be a win too.
2000-02-25 19:56:32 +00:00
7da6407d04
add (minimal, PIO only) support for the popular "Tundra Universe"
...
PCI-VME interface chip and a frontend for the "Bit3 Mod. 2706"
PCI-VME adapter
2000-02-25 18:22:39 +00:00
2fd2b78c1f
Only call the cursor method when the cursor state is actually changing.
...
This avoid corrupting VGA displays in text mode (e.g. the first character
of the prompt when you exit vi).
2000-02-25 17:42:51 +00:00
8d63540a8c
When we close autoconfigured components, we need to note that they
...
are no longer in 'autoconfigured' status.
2000-02-25 17:14:18 +00:00
469464d4c8
add forward declaration of "struct extent", so the extent header doesn't
...
need to be included
2000-02-25 10:33:12 +00:00
7dbe5be481
Disable all windows at boot time, to avoid conflicts when reading the CIS.
...
Also, GC a small bit of code that's inaccesible after the previous change.
2000-02-25 05:26:17 +00:00
ac4c520f05
If we fail to attach the socket driver, clear PCIC_FLAG_SOCKETP so that we
...
don't try to use the socket any further. (This will only happen if the user
explicitly unconfigured some of the sockets.)
2000-02-25 04:24:37 +00:00
1ccb9e8170
when change mbuf type, clear m_pkthdr so that we do not get panic with
...
old data in pointer fields. NOTE: we'll extend m_pkthdr field soon.
Wondering: do mbuf pre-allocation code in elink3.c really buy us much
performance? it comes with code duplicate/synchronization problem with
sys/mbuf.h...
2000-02-25 03:39:13 +00:00
a4f7f062fd
- cleanup raidinit()
...
- cleanup rf_mountroot_hooks()
- various other cleanups.
2000-02-25 02:42:30 +00:00
5716b5d6d1
Be *slightly* more consistent about the use of num and numraid in raidattach().
2000-02-25 02:21:12 +00:00
f5f2ad429c
Initial import of National Semiconductor LM7[89] Hardware Monitor with isa and
...
pnpbios attach.
examples:
lm0 at pnpbios0 index?
lm0 at isa? port 0x290
TODO: spinlocks, i2c interface.
2000-02-25 02:17:43 +00:00
e4e4483cb7
Fix a (slightly) bogus status message.
2000-02-25 02:06:34 +00:00
c86b7572f9
Cosmetic change.
2000-02-25 00:23:57 +00:00
bdd659fc7f
Deal with unconfiguring components in the autoconfigure case.
2000-02-24 23:39:21 +00:00
28fc2b2ee8
Add a DPT ISA HBA frontend, tested lightly with a PM2021A/9X. There are some
...
issues.
2000-02-24 18:49:06 +00:00
50062f0914
- Don't use bitfields.
...
- Cosmetic changes.
- Shut down all HBAs "simultaneously", not individually.
- Don't bother grokking HA_ST_MORE. It causes problems.
- Other bits and pieces.
2000-02-24 18:47:55 +00:00
aea97a5a17
Oops... Missed commmitting this last night. Thanks to Matthias Scheler
...
for letting me know.
(Add the DiskQueueSW pointer)
2000-02-24 17:12:10 +00:00
e644abfe94
Make sure we close auto-configured components appropriately when
...
attempting a rebuild-in-place.
2000-02-24 04:39:41 +00:00
c5961cfba3
Garbage collect some unused stuff. Include rf_kintf.h for a
...
function prototype.
2000-02-24 03:52:15 +00:00
851a2cdcd8
- record the pointer to the DiskQueueSW so we can use that when
...
we hot-add a spare.
- use the above info when adding a spare.
2000-02-24 03:48:41 +00:00
5ed29fa2d6
Delete a superfluous newline in attach message.
2000-02-24 03:42:44 +00:00
9e81bc058e
Now that we have the information available, use the general maxOutstanding
...
value for the RAID set, rather than looking at Queue[0][0] (which may not
exist).
2000-02-24 02:55:05 +00:00
99f070bab8
- mod_counter needs to get incremented more often.
...
- use raid_init_component_labels instead of hand-rolling a component_label.
(missed doing this for the rf_used_spare case when updating component labels).
- fix serial number initialization in raid_init_component_labels
2000-02-24 01:23:05 +00:00
fb13ce76fc
- make sure we note the parity status in the autoconfig case.
...
- also, make sure we grab the serial number from the component labels
when we autoconfig.
2000-02-24 01:22:32 +00:00
df1f794536
Reflect version 1.13 of i82365_isa.c. Untested.
2000-02-23 17:22:11 +00:00
7f8cdf038f
Fix a missing closing parenthesis in an error diagnostic
2000-02-23 08:31:25 +00:00
d94804a788
Pccbb maintains the interrupt handlers for 16-bit PC Cards
...
by itself.
Add some comments.
2000-02-23 07:28:54 +00:00
d91ecfbcfd
Be more aggressive about updating component labels in the event
...
of a real component failure (or a simulated failure):
- add 'numNewFailures' to keep track of the number of disk failures
since mod_counter was last updated for each component label.
- make sure we call rf_update_component_labels() upon any component failure,
real or simulated.
2000-02-23 03:44:02 +00:00
e7f3dc2ec9
blockSize for the component label is already set correctly here.
2000-02-23 02:11:05 +00:00
0c43bf18f0
- cleanup of more component label code
...
- make current default label values available everywhere
- make sure numBlocks and blockSize in component labels get initialized
for all component labels
- check for component size to be smaller than or equal to the partition size
when autoconfiguring
2000-02-23 02:04:21 +00:00
6aaac32240
Do a better job of (re)initializing the component labels after
...
a reconstruct or a copyback.
2000-02-23 02:03:03 +00:00
d84e4ed019
Make a note of autoconfigured components.
2000-02-23 02:01:55 +00:00
e0ab2f3d0f
Correct a comment.
2000-02-23 00:37:11 +00:00
214822e08c
Note the fact that the first arg of raidinit() may be bogus in
...
the autoconfig case (the value of the first arg never gets used, but...).
2000-02-22 23:13:15 +00:00
9651e60835
Fix typos in my last commit that caused the driver to panic.
...
Change some (unrelated) debug messages.
2000-02-22 22:59:49 +00:00
347823e807
Include dev/isa/isavar.h so that this file compiles again.
2000-02-22 22:46:16 +00:00
dcfbcbec76
remove bogus debug (was reading unmapped CCR)
2000-02-22 21:29:36 +00:00
08ef0cfe07
revert previous change
2000-02-22 21:09:50 +00:00
64fa8aa0d6
remove SES driver
2000-02-22 17:43:57 +00:00
e8ff7f6155
Bounds-check the 'last unit' a little more closely.
2000-02-22 16:07:02 +00:00
3f9cf7572c
Don't use void * for chipset tags. Bad hacker, no biscuit.
2000-02-22 16:04:44 +00:00
009856b631
Save and restore a couple ofregisters in the power hook in case BIOS doesn't.
2000-02-22 16:03:42 +00:00
9e16037265
Simplify the attach routine a bit.
2000-02-22 12:24:53 +00:00
b4e291e818
Fix some off-by-one errors; patch from Jonathan O'Brien.
2000-02-22 12:12:21 +00:00
9056664327
Prepare a little for having USB interrupt processing done outside the hard
...
interrupt level (in a thread or a softintr).
No real soft processing done yet.
2000-02-22 11:30:54 +00:00
6cc37002ad
Fix (mostly harmless) typo.
2000-02-22 11:25:06 +00:00
2eda3cf829
Better debug info.
2000-02-22 11:24:22 +00:00
bfaa657135
Fix printf formats on the Alpha.
2000-02-22 08:23:22 +00:00
fb56415023
Add a few comments, and an indicator of whether or not an autoconfig set
...
is 'rootable'.
2000-02-22 03:39:47 +00:00
bd2230fd09
- implement additional component checking before autoconfiguration
...
- make component label setting work again(!!!!)
2000-02-22 03:38:42 +00:00
32f100250f
Cosmetic changes.
2000-02-22 02:38:26 +00:00
b785bb47a0
Establish a powerhook and make sure the card detect interrupt is enabled
...
after resume from suspend, as i82365.c does.
This is a workaround for newer Sony VAIO notebook.
Patch is submitted by Atsushi Onoe (onoe@sm.sony.co.jp ) in PR#9463.
2000-02-22 02:35:26 +00:00
afccbaa6d7
Umm.. let's set 'numraid' to something useful before we try to use it.
2000-02-21 23:33:45 +00:00
8f2d14fbd1
added wmesg argument to pcic_delay debug printout
2000-02-21 20:16:22 +00:00
7f44584598
clen up some error messages
2000-02-21 19:18:53 +00:00
296fbeed2a
Patches from msouth@scruz.net to handle QIC 3220 (HP T20).
2000-02-21 05:11:09 +00:00
158df7b6f1
Don't establish an interrupt if attach is in progress. Anyway, current wdc
...
and its children doesn't require interrupt on attach.
2000-02-21 03:55:22 +00:00
91026fe7f2
Cosmetic changes.
2000-02-21 03:26:41 +00:00
70bbb1b84e
Sync PCMCIA memory mapping with a change from rev 1.47 of i82365.c:
...
always map attr memory 8 bit, since its defined that way. (chopps)
2000-02-21 01:44:36 +00:00
3a76270201
deal with a DELAY vs. delay issue
2000-02-20 22:19:29 +00:00
a3a129e6f5
Oops...I forgot that the GEM-2 chip is so lame that if you don't tell
...
it exactly the right amount of data to transfer for WRITE BUFFER/Global
it will stay stuck in command phase (causing a command phase overrun).
2000-02-20 21:30:44 +00:00
5f0b3b1510
usbd_devinfo_vp(): search the know devs array also if the device
...
doesn't return product description (e.g. Kye's Genius NetScroll
mouse returns vendor, but not product); the strings
returned by device are still preferred to those in the array, though
2000-02-20 14:45:05 +00:00
6b93b03665
regen
2000-02-20 14:39:28 +00:00
e710e0dfa1
Add Kye's Genius NetScroll mouse
...
XXX Should the name be just "NetScroll mouse" ? Kye seems to be manufacturer
XXX for the mouse licenced from Genius.
2000-02-20 14:37:48 +00:00
1c4521f1da
add ses.h to list of includes
2000-02-20 07:39:41 +00:00
c5f8d33f85
minor spelling change
2000-02-20 07:38:48 +00:00
6779fc2bb2
Fix thinko in previous commit.
2000-02-20 03:48:40 +00:00
ac75116d32
Try other config entry on i/o space alloc failure.
2000-02-20 03:18:15 +00:00
6f13498242
correct oops on last checkin
2000-02-19 15:13:07 +00:00
a9697ee5f2
Handle > 12 byte CDBs.
2000-02-19 01:55:42 +00:00
717d5b1cc3
Support for > 12 byte commands for parallel SCSI.
2000-02-19 01:54:42 +00:00
d88aecac57
Remove residual and now broken !ISP_NO_FASTPOST_SCSI code (which was
...
turning back on fast posting!). Redo fabric (re)login loop- don't try
and log out ports that haven't been logged in. Do correct target id
shuffling so we just always find the target ID we want. Add in support
for > 12 byte commands for parallel SCSI. Handle some Dual Bus reset
stuff. Finally fix ABORT COMMAND to use the right 16 bit order of the
handle to abort.
2000-02-19 01:53:56 +00:00
ff86abe827
Cleanup some printaouts.
2000-02-19 01:51:43 +00:00
b6dd4ddacf
Add in ISP_SWIZZLE_CONTINUATION macro.
2000-02-19 01:51:21 +00:00
8c2e6c73e3
Handle dual bus cases for immediate notify and enable lun commands.
2000-02-19 01:50:57 +00:00
98f7f7b5a0
Fix ITDEBUG macro
2000-02-19 01:50:25 +00:00
77dec43b22
Clarify cd_resid tag.
2000-02-19 01:50:03 +00:00
8405ee3752
Add in some mbox return codes that define when we've used up target
...
ids for doing fabric login. Define the 'Get All Next' SNS response
structure.
2000-02-19 01:49:47 +00:00
d282f771e7
Remove redundant CIS definitions.
2000-02-18 18:55:31 +00:00
3e02ded337
Improvement on SFB enabled copycol(); still yet under development,
...
it miserably fails on corner cases.
2000-02-18 06:51:51 +00:00
132107ce3b
Add a whole slew of registers found in the PCnet-PCI family.
2000-02-17 20:18:29 +00:00
6fa8665eeb
Handle detach that happens before attach has finished. (Reported by mycroft.)
2000-02-17 18:42:21 +00:00
50c84950f2
awi: rewrite to be higher performance.
2000-02-17 17:37:23 +00:00
1955c335af
Regen.
2000-02-17 16:30:44 +00:00
536b31a5c8
Add Sony PCGA-UMS1 mouse.
2000-02-17 16:30:11 +00:00
7adb22cfa5
Add detach support.
...
Light cleanup.
2000-02-17 15:58:32 +00:00
f7ad1af2b5
Use bpf_mtap() correctly.
2000-02-17 05:41:41 +00:00
4331d2bcaa
Regen.
2000-02-16 04:29:32 +00:00
021ff75015
Add Toshiba ISA bridge.
2000-02-16 04:29:20 +00:00
7deba340d7
Some of these function names are bad enough that no one else would probably
...
pick them, but preface them with rf_ anyway.
2000-02-16 01:10:44 +00:00
4a1320b29f
Put the entry of FNW-3700T after the entry of SVEC-PN650TX
...
so that SVEC-PN650TX errornously recognized as FNW-3700T.
Pointed out by Takahiro Kambe <taca@sky.yamashina.kyoto.jp>.
2000-02-14 23:13:49 +00:00
b223c00cee
Avoid linker error if no PHY is attached.
2000-02-14 20:29:54 +00:00
1d373a94e2
Bump receive buffer size up to the maximum DMA burst boundary.
2000-02-14 17:14:28 +00:00
a1b5434cec
Make promiscuous mode go again.
2000-02-14 17:06:45 +00:00
085f44145c
- Be more strict in status check before sending a command (make sure
...
DRQ is not asserted). Closes kern/9346.
- Change the "fake identify before the real one" by a delay(). The real cause
of the problem is that the drive is unresponsive just after a reset.
The real problem (and the solution) showed up after the first change.
2000-02-14 12:37:35 +00:00
9558d7b27b
Regen.
2000-02-13 23:10:22 +00:00
a39279da39
Add a bunch of devices.
2000-02-13 23:10:02 +00:00
520d8c032e
Waked up from the dead
2000-02-13 13:01:14 +00:00
99b18eac36
on attach, check if we've got meaningful mac address or not,
...
to detect io mapping problem.
on detach, handle resource deallocations more carefully.
2000-02-13 06:17:58 +00:00
445591e874
Get recent changes into the tree:
...
- make component_label variables more consistent (==> clabel)
- re-work incorrect component configuration code
- re-work disk configuration code
- cleanup initial configuration of raidPtr info
- add auto-detection of components and RAID sets (Disabled, for now)
- allow / on RAID sets (Disabled, for now)
- rename "config_disk_queue" to "rf_ConfigureDiskQueue" and properly prototype
in rf_diskqueue.h
- protect some headers with #if _KERNEL (XXX this needs to be fixed properly)
and cleanup header formatting.
- expand the component labels (yes, they should be backward/forward compatible)
- other bits and pieces (some function names are still bogus, and will get
changed soon)
2000-02-13 04:53:57 +00:00
0b2e81991d
Avoid panic when a non-working hub is detached.
2000-02-12 23:44:16 +00:00
84b6105bbe
Check if device is active in wi_intr and wi_inquire.
2000-02-12 23:35:28 +00:00
fc8ea8f0c5
Misplaced #endif.
2000-02-12 22:06:54 +00:00
d3fb7161d2
Regen.
2000-02-12 22:02:01 +00:00
b4fac8c7d0
Add Microsoft Internet Keyboard Pro.
2000-02-12 22:01:31 +00:00
59748e7e55
Fix the unaligned accesses discovered by dbj.
2000-02-12 21:58:58 +00:00
uch