f68049679a
add two Intel 82810E devices (from IWAMOTO Toshihiro)
2000-03-23 15:10:56 +00:00
2c88f0bb92
s/32-bits/32-bit/ (Hi Al!)
2000-03-23 15:04:49 +00:00
6654f3bc85
While am79c930 controller allows unaligned access, bus_space_read/write
...
must be aligned. So awi_read/write_2/4 issues multiple bsr1/bsw1 when
unaligned.
2000-03-23 13:57:58 +00:00
5cc8601c8f
Identify individual models correctly.
2000-03-23 11:33:35 +00:00
90ae76da4b
Regen.
2000-03-23 11:18:09 +00:00
96ec85342f
Back out rev 1.197.
2000-03-23 11:17:32 +00:00
dce7fa489c
Fix a typo in comment in previous commit.
2000-03-23 08:20:06 +00:00
fc96443d15
New callout mechanism with two major improvements over the old
...
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
2000-03-23 07:01:25 +00:00
3ae525eaa3
Sorry I forgot to commit this file..
2000-03-23 06:04:24 +00:00
dcd265af9c
GC unused variable.
2000-03-23 05:26:00 +00:00
e695f87102
Remove AWICTL stuff that is obsoleted by SIOC[SG]IFMEDIA and SIOC[SG]80211NWID.
...
Also, disable AWICTL completely until awictl.h appears.
2000-03-23 05:19:44 +00:00
bcb26b717f
Add the Nokia C020 WLAN card.
2000-03-22 22:33:47 +00:00
b6a2605ef2
Regen.
2000-03-22 21:41:48 +00:00
86151f6ec3
Add the Nokia C020 WLAN card.
...
(`Guess who Charles works for...')
2000-03-22 21:39:57 +00:00
7da71e5f9e
Make IPKDB working again.
...
Add support for i386 debugging and pci-based ne2000 boards.
2000-03-22 20:58:25 +00:00
1b83998bd7
Add bus_space_barrier.
...
Add DELAY in some busy loops to allow the dma engine to actually do something
(neccessary on fast processors).
2000-03-22 18:02:59 +00:00
4174ad4b3d
Make kbd_iopen/kbd_iclose internal routines; introduce kbd_cc_{open,close}
...
for opening and closing the device when attached to /dev/console.
2000-03-22 16:08:51 +00:00
c8b75dd368
Scale the drain timeout for allowing auto-initialize DMA to complete.
2000-03-22 14:37:43 +00:00
5644a7e248
Update awi driver, which now supports AMD 79c930 based 802.11 DS cards
...
as well as 802.11 FH cards. Also, it can operate in infrastructure mode,
adhoc mode, and wi(4) (aka WaveLAN/IEEE) compatible adhoc mode.
2000-03-22 11:22:20 +00:00
ddd36bd41a
1. Do not apply 5 V on a CardBus card.
...
2. Do not avoid ISA hole when a device requires more than
256-byte io space.
3. Remove sending CardBus bridge's function number to
cardbus stack. This number is not needed for anyone.
2000-03-22 09:35:06 +00:00
b58a073f39
There's no need to frob cfg4/cfg5 in _attach(), since _reset() does it.
2000-03-22 03:27:56 +00:00
e44151e8d6
Fix up some autoconfigure messages. In particular, don't try printing
...
the value of an uninitialized variable. Noted by Luke Mewburn.
2000-03-22 01:41:41 +00:00
ed332d840a
In tlp_cardbus_detach(), only unmap the bus space if we were able to
...
map it in the first place. Pointed out by enami@netbsd.org .
2000-03-22 01:35:14 +00:00
00f7a2d476
if the PCI_CONFIG_DUMP option is defined, set the patchable
...
pci_config_dump variable to 1. otherwise, it gets set to 0. If
that's set, when configuring PCI devices spew the very verbose
configuration space header dump that was previously "#if 0"'d.
If you use this option, or patch the variable to 1, it's strongly
encouraged that you have used the MSGBUFSIZE option to enlarge the
kernel message buffer.
2000-03-22 00:47:26 +00:00
9c93a8b8ff
add PCI_CONFIG_DUMP as a defopted option
2000-03-22 00:43:47 +00:00
7990787b1b
opt_pciverbose.h -> opt_pci.h (it's gonna be used by more things, soon)
2000-03-22 00:36:29 +00:00
8de21980d9
Fix logic bug in fxp_cardbus_match().
2000-03-22 00:17:46 +00:00
e32aed3c4e
Pass xfer size to disk_unbusy().
2000-03-21 19:47:59 +00:00
1e0edbf862
regen
2000-03-21 18:51:43 +00:00
1173b4b28d
add two VIA VT8371 devices
2000-03-21 18:51:08 +00:00
6125f7a094
Fix this again. This time only for prep, and not all of powerpc, which
...
broke macppc.
2000-03-21 18:05:55 +00:00
95a8d1bfcd
Try to use memory mapped I/O on everything but the SMART-2/E.
2000-03-21 13:45:16 +00:00
53e9e9a6dd
Back this out and rethink..
2000-03-21 04:23:22 +00:00
f77540b159
Allow kernels to compile again for prep. Patch supplied by nonaka.
2000-03-21 03:55:23 +00:00
7f288b4e0d
Just return "100% done" when asked about reconstruction progress on
...
a RAID0 set.
2000-03-20 22:59:26 +00:00
68e028fe82
Cancel requested command if controller isn't active.
2000-03-20 22:57:00 +00:00
83446dedc1
- Test the generic device active flag instead of home grown one.
...
- Test also it in wdcintr.
2000-03-20 22:53:36 +00:00
424f6471cb
- Remove dead code.
...
- Make synchronous writes optional, disabled by default (*way* too slow).
- Handle case where dm_nsegs > CAC_SG_SIZE.
- Fix a couple of silly bugs.
- Fix use of __attribute__((__packed__));
2000-03-20 18:48:34 +00:00
282dcaac92
Regen.
2000-03-20 18:39:52 +00:00
a28ca8f97e
Add support for RPTI-EP400 PCMCIA network adapter. Patches supplied by
...
Tim Walls in PR kern/9644.
2000-03-20 18:39:32 +00:00
d02615fe27
Install cac{reg,var}.h.
2000-03-20 18:07:59 +00:00
bd134c34ac
only define struct vnd_softc if _KERNEL is defined
2000-03-20 13:17:47 +00:00
7327fb6f23
Split off tty initialization in rcons_init() into a separate routine
...
and get rid of `fbconstty'.
2000-03-20 11:24:46 +00:00
4f91a51915
Move `nca' declaration to `conf/files'.
2000-03-20 11:03:42 +00:00
92d27d3c2e
Get rid of the powerhook when we detach.
2000-03-20 07:52:58 +00:00
634d0c9744
Oops; fix a slight biff in the PIO input routine.
2000-03-20 06:01:11 +00:00
979d79d931
Use sc_cfg4 for the Am53c974.
2000-03-20 05:48:28 +00:00
553896782a
Cosmetics. ( 0x80 -> NCRSTAT_INT )
2000-03-20 03:49:22 +00:00
0ef19aad57
Regen.
2000-03-20 01:31:29 +00:00
06bb856348
Some new devices. From FreeBSD.
2000-03-20 01:31:10 +00:00
df8c3f5ceb
Interrupts work now. Woohoo.
2000-03-20 00:53:17 +00:00
8b484a0264
NCR_SCSIREGS() and NCR_PIOREGS() are bogus. GC them.
2000-03-20 00:50:20 +00:00
41cd6b4fc9
Reset CFG4 and CFG5 correctly in the reset routine.
2000-03-20 00:49:42 +00:00
ebd6f5f498
Add another item.
2000-03-20 00:42:21 +00:00
9a34877094
Clean up code a little.
2000-03-20 00:41:55 +00:00
eb6e78ce98
Make sure all packets (except the last) have the maximum packet size even
...
when using multiple TDs.
2000-03-20 00:37:00 +00:00
89de970942
Switch method for determing if we are cold booting. The driver now works
...
with OHCI adapters.
2000-03-20 00:27:11 +00:00
94afb61b8b
Remove some items!
2000-03-19 22:28:02 +00:00
9762d78a52
Make control transfer of over 8K possible by using a chain of TDs.
2000-03-19 22:24:57 +00:00
c6eb2d324c
Add ioctl USB_SET_REPORT for uhid. This will allow manipulating the
...
feature items.
2000-03-19 22:23:28 +00:00
f1ebad18a4
Add esp_pcmcia. For the moment it's polled, since interrupts don't seem to be
...
working.
2000-03-19 21:54:01 +00:00
92c19e5ff7
Add suspend/resume hooks to ensure that the chip doesn't scramble memory
...
after an APM suspend and is unsnoozed after an APM resume.
2000-03-19 21:45:23 +00:00
c2150bf8bf
Adapt to ncr53c9x change.
2000-03-19 21:27:01 +00:00
b8e1812629
For the ESP406/FAS408, add sc_cfg4 and sc_cfg5.
...
Add a detach routine, and do the addref/delref.
2000-03-19 21:25:49 +00:00
2d937cc876
Make it a bit more clear which functions are specific to which models.
...
Split off register definitions into eapreg.h.
Remove duplicate codec reset.
2000-03-19 17:11:50 +00:00
08a1a0f49d
Use a somewhat more flexible method to hook up the keyboard driver
...
as the console input device.
2000-03-19 12:50:43 +00:00
6d04005134
Check for console input and output separately.
...
XXX - split input/output for /dev/console is not yet supported.
2000-03-19 12:42:45 +00:00
3f1373d9b7
Define separate flags for console input and output.
...
Allow console operations to be passed in attachment arguments.
2000-03-19 12:39:47 +00:00
b0ca3fa931
The soft-interrupt handler now returns void.
2000-03-19 10:38:43 +00:00
281c45ba53
Added NOLUNS quirk for YAMAHA CRW8424S
2000-03-19 10:33:26 +00:00
783a9476be
Track name change espvar.h -> esp_isavar.h so 'make includes' works again.
2000-03-19 09:11:50 +00:00
893f3574fb
Make clearer. IMHO, all of this code should stop referring to Control-L
...
and Control-R, since those suggest ^L and ^R, not Left and Right Control.
2000-03-19 06:31:17 +00:00
4f2a934e05
Correct a comment
2000-03-19 06:24:52 +00:00
744ccf496c
Expose ncr53c9x_init().
2000-03-18 22:18:57 +00:00
c0b35f72c2
Adjust ncr53c9x_intr() prototype.
2000-03-18 22:09:32 +00:00
48e59fc985
esp -> esp_isa
2000-03-18 21:50:20 +00:00
4a915758fd
esp -> esp_isa
2000-03-18 21:49:33 +00:00
9dd3a0973d
This turns out to be the wrong interface for what I needed -- but I'll leave
...
the code here for now.
2000-03-18 21:11:16 +00:00
03dddfc09e
Preliminary support for 53c40x-based cards. Needs some more work.
2000-03-18 17:59:52 +00:00
b1d2b97787
Change footprint of ncr5380_intr() to match normal interrupt handler usage.
2000-03-18 17:14:34 +00:00
1d1321109f
Use bus_space on MIPS.
2000-03-18 17:07:46 +00:00
28b4015ca2
GC.
2000-03-18 16:52:20 +00:00
0af581a1a1
Add a ncr5380_attach() routine which does part of the initialization, attaches
...
the scsibus, and does the addref/delref dance.
2000-03-18 16:13:22 +00:00
302a1bd362
Regen.
2000-03-18 15:01:33 +00:00
2ab04a0400
Add the Panasonic 4X CD-ROM Interface CArd.
2000-03-18 15:00:31 +00:00
7e9aa53f0a
nca -> nca_isa
2000-03-18 13:17:03 +00:00
5960b2aec6
Move some code around in preparation for nca_pcmcia.
2000-03-18 13:05:20 +00:00
638726b0db
* rework the quirk table ('device_tab'):
...
* QUIRK_NOMSG only has any meaning when NCR_GETCC_WITHMSG
is defined. Therefore, there's no harm in using it when
NCR_GETCC_WITHMSG is not defined. so, simplify the table
by removing the #ifdef.
* there's really no point in having table entries after
an entry which will match everything.
* add some comments, clean up spacing.
* add an entry for "QUANTUM"/"ATLAS IV" drives with flags
QUIRK_NOTAGS|QUIRK_NOMSG. (I included the latter flag only
because everything else had it before! ... which means that
all the functionality added with the NCR_GETCC_WITHMSG define
would never get used! *sigh*) The latter fixes the problems
I was having on an Atlas, and should fix the problems mentioned
by Hans Hoppe <hopha@casema.net> in comments on PR#7694.
2000-03-18 06:59:02 +00:00
52b7212c58
undo the non-script changes from rev 1.87. They caused problems in
...
1.4.x and i have concerns (but no concrete proof) they will cause/have caused
problems in -current as well. Really, the right way to fix this is to
rewrite the driver, and push up tagged queueing handling into a common
middle layer that'll do it right in a low-level-driver-independent manner.
I'll fix my particular issues by using the ncr driver quirk mechanism.
2000-03-18 06:47:28 +00:00
670d533d54
Keep the bit position even when the report descriptor says POP.
2000-03-17 18:09:17 +00:00
11bd453515
scsiprint() is needed even without scsibus'es, so move it to scsi_base.c .
2000-03-17 11:45:49 +00:00
bd1cc85c63
Use a kvtophys() hack for mips like for alpha. No idea if it actually works..
2000-03-17 11:30:14 +00:00
82ad0bf745
atapiprint() does not exist.
2000-03-17 11:23:23 +00:00
5c0cae7a28
Fix botched merge in previous.
2000-03-17 09:25:22 +00:00
0bf221f2d9
- remove leftovers of FreeBSD code in #if 0/#endif
...
- fix a bug in ti_encap() where a NULL pointer could be used if we run out
of tx descriptors (return ENOMEM instead, and let the caller assert OACTIVE)
- sync boot messages with NetBSD's pci standart (print ti_name and irq
line)
- add a shutdown hook to stop the board, so that the board will not DMA at
random places while we're rebooting
- convert all but TIGON 1 transmit descriptors to use bus_space
(this last one isn't trivial to get rigth and I don't have the hardware to
test)
- If we can't map the mem space linar, retry to map it nolinear. Punt if
we couldn't map the mem space linear and we found a Tigon 1 chip.
With these changes a Tigon 2 board (netgear BA620 at last) can be used in
my DS20.
2000-03-17 09:20:16 +00:00
93eb82ff2f
Recognize the Intel InBusiness.
2000-03-16 23:41:40 +00:00
56460ec830
Regen.
2000-03-16 23:41:30 +00:00
3f182de5c6
Add product ID for the Intel InBusiness 10/100 Ethernet adapter (which
...
is an i82559 with a different product ID).
2000-03-16 23:36:44 +00:00
cdc4484e47
Regen.
2000-03-16 21:51:45 +00:00
94f5fe4392
Add Altec ADA70 speakers and have them recognized despite announcing an
...
old rev of the USB audio spec.
2000-03-16 21:51:23 +00:00
34329d9139
regen.
2000-03-16 18:28:11 +00:00
348fff03fb
add I/O DATA USB-ET/TX USB ethernet adapter.
2000-03-16 18:27:21 +00:00
9eb76252d0
Regen.
2000-03-16 16:48:59 +00:00
8a8e062c16
cards for if_awi:
...
Add AirSurfer Pro
Change the name for AMD Am79C930. The same CIS strings are used
both for Melco WLI-PCM and NTT-EL SS Magic.
2000-03-16 16:38:41 +00:00
afaa5767a3
Match shutdown msg with that of cac.c.
2000-03-16 15:13:05 +00:00
534da504b9
Cosmetic change.
2000-03-16 15:09:59 +00:00
a81a812b50
Remove unneeded field in 'struct cac_ccb'.
2000-03-16 15:07:22 +00:00
70063dc527
Driver for Compaq array controllers and disks (cac(4)/ca(4)).
2000-03-16 14:52:22 +00:00
6e0e3d609f
Replace LE() macro with le32toh()/le32toh().
2000-03-16 12:40:51 +00:00
1a774a9979
Set bus_intr to ahc_pci_intr.
2000-03-16 10:34:33 +00:00
f44ddd61a9
Do bus-specific interrupt handling (i.e. ahc_pci_intr) via a bus_intr
...
field in the softc, instead of relying on NPCI > 0. This would
prevent things from compiling if PCI buses were in the config file,
but ahc was attached only to something else than the PCI bus.
2000-03-16 10:33:45 +00:00
f52c9620bc
Place 34 by 80 console at the center of screen.
2000-03-16 05:50:57 +00:00
0b765ee6f8
Retain rendering performance lossage by rasops, but suffering
...
flexibility in turn; this renderer is 2B stroke (less than 16 pixel
width) font only. If 1B stroke (less than 8 pixel width) font is
ever supported, the font data should be converted into 2B stroke
during font initialization process. 'wsfont_realize()' is to be
proposed in order to have 'CPU and/or accelerator hardware friendly'
format to squeeze maxinum performance.
2000-03-16 05:48:28 +00:00
aa8b5ebd93
On initialization failure, free all the storage allocated to store
...
component pathnames rather than the last one.
2000-03-16 03:54:01 +00:00
5336e37153
Make this file just compiles again.
...
XXX Don't expect to work yet. It fails even to link depending on your
XXX kernel config file.
2000-03-16 03:06:51 +00:00
c99c03da4d
Make the USB event queue longer. Mine overflows before the (user-land)
...
event handler has started. But then I have about 25 devices connected. :)
2000-03-16 00:46:38 +00:00
1a9f0619fd
Fix thinko in the handling of FORCE_SHORT_XFER so that it actually
...
transfers a 0 length package instead on munging the whole transfer.
The aue driver works now.
2000-03-16 00:41:50 +00:00
f9fd27ea3c
Fix an uninitialized variable. From Krister Walfridsson <cato@df.lth.se>
2000-03-15 22:41:29 +00:00
499e5cba01
Fix some uninitialized variables. From Krister Walfridsson <cato@df.lth.se>
2000-03-15 22:40:30 +00:00
411a31adb2
- Go to splimp() when sending the rtsock message regarding link status.
...
- Would like to notify protocols if a link goes up or down, to e.g.
restart Duplicate Address Detection, etc. Add a comment to this
effect.
2000-03-15 20:34:43 +00:00
c38405d33d
Add power management support to the `tlp' driver. The battery on my
...
laptop lasts a whole lot longer now.
2000-03-15 18:39:50 +00:00
fbc4dbb7ac
Catch up to rearranged aic7*.h files
2000-03-15 07:17:06 +00:00
220005d941
Eliminate unused sc_cookie field of struct ioasic_softc.
2000-03-15 03:07:44 +00:00
14620f1eee
PCI frontend for new ahc driver.
2000-03-15 02:33:52 +00:00
1e4647a15b
New ahc driver, a port of Justin Gibbs' FreeBSD driver. This adds
...
support for the U2W chips, and U160 controllers.
2000-03-15 02:08:28 +00:00
085f68836e
Common code for EISA and VL frontends for the ahc driver, split off
...
by Noriyuki Soda when updating for the new ahc driver.
2000-03-15 02:06:18 +00:00
7df6153163
Update EISA frontend for new ahc driver (done by Noriyuki Soda).
2000-03-15 02:04:43 +00:00
2da1f00fcd
Update cardbus frontend for new ahc driver.
2000-03-15 02:03:51 +00:00
d025f5705e
Add a couple of defines/aliases for messages.
2000-03-15 02:02:37 +00:00
b6f22443bb
Remove ancient code.
2000-03-15 00:38:40 +00:00
1e1f1f3b3b
Make sure the USB event thread discovers all devices first time it call
...
usb_discover().
It should now be possible to have the root NFS mounted over a USB Ethernet
adapter.
2000-03-14 23:13:12 +00:00
797ac20035
Add power management hooks.
2000-03-14 21:20:51 +00:00
60ed7cfb2b
Simplify the code a bit.
2000-03-14 10:26:10 +00:00
70b8e188ee
Don't think that a card is inserted if there is a card already in the slot.
...
Note that powerdown hook calls pccbbintr so that it detect card insertion or
removal during suspension.
2000-03-14 10:23:16 +00:00
d454505125
Cosmetic change.
2000-03-14 10:20:09 +00:00
65da099cb1
Unnecessary to enclose device driver body with #if NASC > 0.
2000-03-14 08:23:29 +00:00
2eb68c00d2
Respect video console colour designation by configration file.
2000-03-14 08:04:06 +00:00
80c0893a8b
Switch to improved flexible video console text rasterizer provided by
...
rasops and wsfont.
2000-03-14 06:25:21 +00:00
ae493d8845
Resolve LP64 issues.
2000-03-14 04:23:14 +00:00
297455cbe2
Pick I/O before Memory space.
2000-03-14 02:08:21 +00:00
e58bd0c365
Regen
2000-03-14 01:46:56 +00:00
67027b1103
Add product ids for some VIA Technologies VT82C686A southbridge devices.
2000-03-14 01:45:11 +00:00
b3cf850817
Fix typos in comments.
2000-03-14 01:29:30 +00:00
95054da1a1
Fix doubled 'the's in comments.
2000-03-13 23:52:25 +00:00
49389b9817
tabbing consistency on the 3c1 entry
2000-03-13 23:36:02 +00:00
e2850da406
Regen.
2000-03-13 21:17:32 +00:00
5402c76d3e
add an entry to the product table for the 3C1. This seems to work,
...
at least as necessary to pull out the MAC address, etc. Not actually
tested xmit & rcv yet.
2000-03-13 20:32:28 +00:00
8409d84d62
regen
2000-03-13 20:31:23 +00:00
00a2570a2e
Add 3com Megahertz 3C1 10Mbps LAN CF+ Card
2000-03-13 20:30:24 +00:00
f91ce51084
Regen.
2000-03-13 17:24:14 +00:00
e22c4b3d1f
Add a bunch of Compaq array controllers.
2000-03-13 17:23:26 +00:00
9f0c40cff1
Add Palm serial adapter.
2000-03-13 17:14:27 +00:00
112137cd30
Added Artec/Ultima A6000C scanner to the quirks table (no LUNs).
2000-03-13 09:56:26 +00:00
035f58c823
HPC/PsPC keyboard types.
2000-03-13 01:46:44 +00:00
a7f01b4816
Fix DMAADDR():
...
Return the mapped address of the block, not the kernel address.
A uhci device now finds devices on my pc164.
2000-03-12 23:10:29 +00:00
b8b53d87db
Avoid accessing the device if it is dying.
2000-03-12 21:57:50 +00:00
ce6f0100c1
Remove extra \n in attach message.
2000-03-12 19:16:48 +00:00
347a1f736e
Reverse the mapping of the control/status registers. Use I/O before MEM.
...
My card works now on a TI1220 chipset. Approved by Jason.
2000-03-12 17:05:23 +00:00
e750135b5e
A few things:
...
* Initialize PCIC_INTR and PCIC_CSC_INTR on all chips, not just TI.
* Leave card detect interrupts enabled in PCIC_CSC_INTR. (This requires
reading PCIC_CSC in the interrupt handler on some chips, so do that too.)
* Leave PCIC_INTR_ENABLE set, as some chips require this to post card detect
interrupts while in PCMCIA mode.
* Leave PCIC_INTR_RESET (which is inverted) set at all times *except* when
powering up a socket, as some chips will use it to drive RESET# low even
while a CardBus card is in the slot.
This makes PCMCIA and CardBus cards works with some TI chips. Cross-checked
with a Toshiba ToPIC 95B.
2000-03-12 11:31:53 +00:00
30f73f1831
support bus probes a la "badaddr" and VME interrupts, fix error handling
...
after mapping problems
2000-03-12 11:23:06 +00:00
e135f943fa
add support for DMA mapping, bus probes ala "badaddr" and VME interrupts,
...
improve diagnostic output
2000-03-12 11:21:02 +00:00
1203bdcbb3
Bus_space-ify TGA register accesses.
...
(raster operations are still using pointer-based access)
2000-03-12 05:32:29 +00:00
058d87a788
Add a new frame buffer identifier for the hpcmips.
2000-03-12 04:59:24 +00:00
602faa83a8
Do *not* fiddle with the serial/parallel IRQ mode selection on TI chips.
...
Without extensive probing, we cannot possibly know that we're doing the right
thing.
Also some stylistic changes.
2000-03-12 04:34:29 +00:00
781b535703
Revert the previous change.
2000-03-12 04:27:12 +00:00
c7a13f6116
Revert the previous change. It does not match the commit message *and* was
...
incomplete (and probably quite broken).
2000-03-12 04:25:57 +00:00
5c64f2064d
Add missing sc_pil_intr_enable member to pccbb_softc.
...
XXX Double check this, please. The code appears to only use it as a
boolean, but...
2000-03-12 01:15:04 +00:00
27fe6c0aee
regen
2000-03-11 16:13:39 +00:00
d01b78affd
Add id for Alliance AT25, as sent by Dave Sainty in kern/9596.
2000-03-11 16:13:14 +00:00
2d525b16dd
The shortened 1371 reset delay in revision 1.32 doesn't seem to be
...
quite enough for my 1373, so increase it some.
2000-03-11 06:42:37 +00:00
b58bf3c7bb
Don't reset cp->hw_ok ro 0 when cp isn't initialised in cy693_chip_map()
...
(used only in failure case). Pointed out by Wolfgang Solfrank.
While I'm here correct indentation.
2000-03-10 21:21:48 +00:00
173f823e3a
Only apply power on 3.3 V CardBus card (there are no 5 V CardBus card.)
2000-03-10 11:08:49 +00:00
7e044bd4e5
Move pretty much all of the PCI configuration goo into a separate
...
function.
2000-03-10 07:26:41 +00:00
370bc1832b
Normalize the copyright notice (TNF copyrights should *always* match
...
the appropriate template), and run through indent.
2000-03-10 07:11:47 +00:00
0fef451485
Pull the code that take the Tulip out of powersave mode into a separate
...
function.
2000-03-10 06:55:09 +00:00
f76ce3b475
Only poll for bell completion if we're calling in from cnbell(). Fixes
...
a problem reported by Lennart Augustsson.
2000-03-10 06:10:34 +00:00
cf32e2713c
Adopt the macro name change of if_ieee80211.h.
...
also fixed the value for receiving packets in infrastructure mode,
while no one has been tested with.
2000-03-10 05:47:42 +00:00
0391e3393f
Slight change to the SROM size printf.
2000-03-10 02:46:39 +00:00
9f86839658
change Mb/s to MB/s (Megabit to megabyte).
2000-03-09 23:19:26 +00:00
c70220f2a2
Move PCIIDE_CHANNEL_NAME macro to pciidereg.h.
2000-03-09 20:26:31 +00:00
0542cec055
put "#ifdef __alpha__" around "alpha_mb()" calls
...
(I know the driver is useless without console initialisation, but it
should at least compile.)
2000-03-09 18:40:36 +00:00
24ea2caf14
regen
2000-03-09 09:53:03 +00:00
3abb87c0f5
Add Conexant SoftK56 PCI Software Modem, Sony CXD3222 OHCI i.LINK(IEEE 1394)
...
PCI controller, Sony Memory Stick I/F Controller
Ids send by John Hawkinson in kern/9588
2000-03-09 09:50:49 +00:00
7e567738f2
support rfact. use manufac. suggested resistor values by default
...
clean up some comments
2000-03-09 04:20:58 +00:00
7e6d7b8613
use bus independent probe
2000-03-09 04:19:03 +00:00
e0d3ede01c
Get the status right when a polled transfer times out.
2000-03-08 15:34:10 +00:00
07574c3239
Add a debug message.
2000-03-08 15:33:38 +00:00
45f32a77f5
Clean up code a little and add some more debug messages.
2000-03-08 15:33:24 +00:00
af00b7b880
split probe into generic and bus specific
2000-03-07 18:39:14 +00:00
4398e0bd07
Fix CardBus device number. Though CardBus device number should be 0,
...
the value of bridge's function number was assigned to the device
number.
2000-03-07 09:36:52 +00:00
c1b54794fc
Add missing `cnt++'.
2000-03-07 03:37:39 +00:00
7ce8a9f46b
Also, fix indentation in previous commit.
2000-03-07 03:34:52 +00:00
7c57ac56d7
Cleanup a couple of function declarations. No functional changes.
2000-03-07 03:09:47 +00:00
51ffb0924c
Create a new rf_close_component() to handle vnode operations for closing
...
components. Teach rf_UnconfigureVnodes() how to use it, and tell
the copyback and reconstruction code about it too.
2000-03-07 02:59:50 +00:00
ddebc1cad0
Move rf_UnconfigureVnodes to rf_netbsdkintf.c where it will be more at home.
...
Add prototype to rf_kintf.h, and nuke old prototypes from rf_disks.c and
rf_driver.c .
2000-03-07 02:28:05 +00:00
33a55d022b
rf_ protect the component label print routine, and make it more easily
...
available to the rest of RAIDframe.
2000-03-07 02:12:13 +00:00
dbf5d1f7a6
Nuke unused code.
2000-03-07 01:54:29 +00:00
dfaacf6eab
Fix bug in previous.
2000-03-07 01:08:55 +00:00
8f8714687b
Reenable the code that clears SLEEP and SNOOZE from the CFDA register.
2000-03-07 01:08:47 +00:00
6cc1408bca
Only print SROM size if TLP_DEBUG.
2000-03-07 01:06:12 +00:00
joda