mycroft
e2686d0a1b
Use splnet, not splimp.
1998-08-08 23:51:39 +00:00
mycroft
c49235f44c
Use splnet(), not splimp().
1998-08-08 23:44:12 +00:00
mycroft
7795559d04
Use splaudio on the arm32 port.
1998-08-08 23:40:03 +00:00
mycroft
254afcaecb
Sleeping forever kinda sucks.
1998-08-08 21:37:00 +00:00
mycroft
17932f0575
Set the correct modes for the record channel.
1998-08-08 20:55:36 +00:00
augustss
94e9a8651a
Forgotten to commit this in last change.
1998-08-08 11:00:33 +00:00
ross
815f9f2445
1. Untangle preprocessor conditionals for sanity and {} balance
...
2. Fix a race between the first callout and the first non-polled ncr_start()
1998-08-08 00:14:08 +00:00
drochner
49637cda8d
use an md keyboard beep replacement function on alpha too
1998-08-07 10:28:36 +00:00
thorpej
9bb616c621
Regen.
1998-08-07 06:59:31 +00:00
thorpej
88c6239026
Add product IDs for the 3Com Cyclone-based PCI Ethernet devices,
...
the 3c90xB DMA-only cards.
1998-08-07 06:58:57 +00:00
thorpej
558733ffc6
Track our carrier status and report it in the media status callback.
1998-08-07 05:55:14 +00:00
matt
202c97c54d
Add an isapnp frontend for the ess driver. It somewhat works
...
(sounds is made but one buffer is played continuously).
1998-08-07 00:53:23 +00:00
matt
7b044dea51
Make the irq checking logic somewhat less bogus.
1998-08-07 00:51:06 +00:00
augustss
51bb504a6e
Report a sensible MIDI device name.
1998-08-07 00:28:20 +00:00
augustss
48bae9ee88
Add MIDI support. The MIDI devices can be accessed as ``raw'' through
...
the /dev/rmidiN devices, or with a sequencer interface via /dev/music.
So far the only supported MIDI device is the MPU401 port on SoundBlaster
(and only on SB on isapnp, since we do not have locators with multiple
values yet).
1998-08-07 00:00:55 +00:00
augustss
02c9ad1755
And fix pastos.
1998-08-06 12:26:51 +00:00
augustss
a79bb0d7ae
Fix tyop.
1998-08-06 12:23:39 +00:00
drochner
e2a2525203
fix incorrect length of LOCATE CDB (reported in PR kern/5306 by
...
Dave Huang <khym@bga.com>)
1998-08-06 10:20:38 +00:00
augustss
0c6791d804
Add macro to test iobase validity.
1998-08-05 16:40:22 +00:00
augustss
28e2d6024a
Clarify a comment.
1998-08-05 16:38:09 +00:00
drochner
32fce55082
Improve generation of default disklabels:
...
-store printable product ID in cd's and sd's softc, use it as "typename"
-for this, add a "destination buffer length" argument to scsipi_strvis()
-return ATAPI device type for ATAPI devices
1998-08-05 16:29:04 +00:00
augustss
a0aeff98c4
Fix two pastos.
1998-08-05 10:16:25 +00:00
augustss
f76fb48283
Use looping DMA for play channel.
...
More cleanup.
1998-08-04 13:14:42 +00:00
augustss
5b057ab09f
Allow option AUDIO_INTR_TIME even if the platform does not support
...
FP in the kernel.
1998-08-04 11:26:14 +00:00
augustss
ac2b25e392
Improve some error messages.
...
Make some preparations for isochronous transfers.
1998-08-02 22:30:52 +00:00
augustss
607075abc6
Use wskbd enable function.
1998-08-02 22:27:01 +00:00
drochner
0dc548ce7d
Adapt to wskbd interface changes; add dummy enable/disable function.
1998-08-02 14:22:25 +00:00
drochner
86b0985e69
Adapt to wskbd interface changes; implement enable/disable function.
...
Disable the keyboard on attach if not console.
1998-08-02 14:21:02 +00:00
drochner
4ee71fe4f4
Split the wskbd_attach arguments into console and autoconfiguration parts
...
(again); put some constant data into shared structures. This makes it
more look like the mouse part, and it helps USB integration.
Implement wskbd_enable() to enable/disable the keyboard.
1998-08-02 14:18:07 +00:00
augustss
eba74b9369
Abort interrupt pipe on disconnect.
1998-08-01 20:52:45 +00:00
augustss
6aff95b06c
Make sure to abort the interrupt pipe on disconnect of a mouse or keyboard.
...
Improve some error messages.
1998-08-01 20:11:38 +00:00
augustss
f654e0188e
Switch from a global flag to tell if the host controller should use
...
polling to a local one for each controller.
1998-08-01 18:16:19 +00:00
augustss
5a1f4dd6bc
Complete the scancode conversion table.
...
Tell the keyboard not to send idle reports.
1998-08-01 17:46:22 +00:00
augustss
ce69d417a2
Make it compile without DIAGNOSTIC
1998-07-31 23:54:09 +00:00
mjacob
6e34b79e01
Suggestion from Matthias Drochner: If at close you decide to write
...
filemark 'coz you opened write only and didn't do anything else,
call st_check_eod to possibly write TWO furshlugginer filemarks.
Also- return any errors from writing filemarks out of stclose.
1998-07-31 17:25:55 +00:00
augustss
6b407a79c6
Major cleanup of the ESS driver. It now sorta works. More to come.
1998-07-31 15:17:17 +00:00
thorpej
53878c1925
Change one word to be consistent w/ a previous message.
1998-07-31 05:37:02 +00:00
thorpej
99d64ae1ca
Oops, unused variable.
1998-07-31 05:29:48 +00:00
thorpej
4ea9132164
Rearrange isapnp_callback() slightly.
1998-07-31 05:28:24 +00:00
thorpej
c489673819
Ensure we're probed only once per ISA bus.
1998-07-31 05:26:15 +00:00
wrstuden
06761b1ed4
Merge in a register definition mentioned only in passing in one place in
...
the Zilog docs.
1998-07-31 05:08:38 +00:00
thorpej
6ec566abd2
Add BeBox support.
1998-07-31 04:56:55 +00:00
thorpej
c46ad7a0cc
Add NetBSD/arm32 support.
1998-07-31 04:50:54 +00:00
thorpej
171cebde9c
Actually add support for the Atari.
1998-07-31 04:45:01 +00:00
thorpej
75db93cec2
Pull in files.isapnp here; the two busses are linked together quite closely
...
(more than we'd like maybe, but don't we wish ISA didn't suck...)
1998-07-31 04:40:39 +00:00
thorpej
54de49fcb9
Add support for NetBSD/alpha.
1998-07-31 04:35:22 +00:00
thorpej
f40a42d5c4
Use config_defer() to scan for ISA PnP cards.
1998-07-31 04:00:35 +00:00
mjacob
b90b2a3798
Several more changes. First of all, move CTRL_MODE to have I/O behaviour
...
like a no-rewind device. Secondly figure out whether the initial TUR
for a CTRL_MODE open resulted in a tape being actually found (if so,
then do a mount session).
Move the 'sun compatibility' behaviour into stdone && stclose- don't
mark a tape as having been written in stopenm, fer gosh sakes.
1998-07-31 04:00:22 +00:00
thorpej
03ffe0a516
Use the pool allocator for scsipi_xfer structures.
1998-07-31 03:00:51 +00:00
thorpej
6056af462f
Use the pool allocator for vndxfer and vndbuf structures.
1998-07-31 02:24:26 +00:00
thorpej
dcfe0e1506
Back out part of previous; it is perfectly reasonable, and desirable, to
...
print out debugging info ifdef DEBUG.
1998-07-31 02:14:40 +00:00
mjacob
bec14b0ce3
Part A (Cosmetic nonsense):
...
>We're not Linux. If we still want driver version strings to be displayed
>at boot, then I suppose DEBUG is a reasonable compromise.
Makes the whole concept useless. This is for default printouts. If you
can build a debug kernel, you know what version you have. This was under
the concept of 'RAS' so that hapless users could tell you microversion
things. But I guess this isn't the right way according to our local
Jesuits. Oh, well. I'll think up something different and hopefully
less objectionable. And yes, NetBSD isn't linux. The developers seem
to be equally bad tempered, but linux is more successful.
Part B:
Field interrupts in OS layer so that (in this OS) bus_dmamap_sync(POSTREAD)
can (formally) ensure that the result queue is stable wrt to buffering
and that for sending a command a bus_dmamap_sync(PREWRITE) is done to
ensure that the device gets a good view of what the mailbox contents
should be.
1998-07-31 02:08:16 +00:00
thorpej
4356136193
Use the pool allocator for component buffer headers.
1998-07-31 01:23:56 +00:00
rvb
11c3d96b49
Flush spurious #endif after ADDMULTI
1998-07-31 01:10:13 +00:00
thorpej
3cd681ef27
Typo.
1998-07-31 00:42:31 +00:00
thorpej
34529b444b
From cd.c: call disk_unbusy() if we are unable to enqueue our command.
1998-07-30 23:57:07 +00:00
pk
6026f141fd
Enable bus_dmamem_alloc/bus_dmamem_map
1998-07-30 22:44:51 +00:00
thorpej
bf52ef5697
Squash unused variable.
1998-07-30 22:17:34 +00:00
is
ae2fb64e3a
Document supported boards near the top of the driver source code.
1998-07-30 21:28:15 +00:00
thorpej
4f8d24662e
Uncomment the SoundBlaster ofisa attachment; the Shark isn't the only
...
potenial user of ofisa (e.g. my FirePower). An ofisa attachment for the
SoundBlaster is prefectly legitimate.
1998-07-30 21:25:05 +00:00
thorpej
0bd4f9291c
Use the correct "compatible" strings (ESS, not generic SB!), and correct
...
some comments about what we expect as far as interrupt and dma properties.
1998-07-30 21:22:59 +00:00
thorpej
16ad73c288
Add the Simple Technology Communicator 28.8.
1998-07-30 20:47:11 +00:00
thorpej
b25d4941cd
Regen.
1998-07-30 20:45:35 +00:00
thorpej
965404c104
Add Simple Technology vendor ID, and Simple Technology Communcator 28.8
...
product ID.
1998-07-30 20:44:25 +00:00
christos
b7a585b61d
Use the previously committed pnp hook.
1998-07-30 18:03:34 +00:00
christos
c1303944f7
Add a hook that resets the bios configuration from the pnp devices
...
thus making them invisible to isa probes [from OpenBSD]
1998-07-30 18:02:50 +00:00
christos
dd49f248a4
Protect against multiple inclusions.
1998-07-30 18:01:44 +00:00
is
8bd9c69e11
Multicast support.
1998-07-30 16:40:19 +00:00
augustss
c0ca4781ed
ESS attachments for ofisa.
1998-07-30 14:15:59 +00:00
augustss
cdeb158d5f
A first stab at making the SHARK sound work. It doesn't really work
...
yet, but it probes and makes a noise when used. Stay tuned!
1998-07-30 14:11:42 +00:00
drochner
326ffe6cd3
regen
1998-07-30 09:47:49 +00:00
drochner
085f3ce0cc
add entry for Boca 56k (from Fujie Zhang <fzhang@NMSU.Edu>)
...
update comment for OPL3-SA2 / OPL3-SA3 (same PnP ID)
1998-07-30 09:45:16 +00:00
mjacob
e404c0efec
Some minor comment tweaking.
...
Also- to be fair and on review, kern/391 isn't really addressed by
the previous commits. In reviewing, I'm embarassed to find that this
talks about reading at EOT. I'm actually going to claim that this
is 'not a bug' or 'fixed already' in that at the end of media (at the
edge of recorded media), you may continuously open the tape (should
you choose to) issue a read, and zero bytes will transfer- this is a
sufficient EOF indicator.
1998-07-30 04:11:43 +00:00
mjacob
c45a129a99
Clarify and name some of the 'open' modes. Clarify a few comments. Remove
...
a now unused variable. Also, remove the restriction against at density
code being greater than the max SCSI 2 density code: 0x80..0xff are the
Vendor Unique codes and most certainly should be allowed. The check for
invalid values should be less than 0 or greater than 255.
Oh- yeah, the previous commit addressed kern/391.
1998-07-30 03:17:22 +00:00
mjacob
7692effeed
Make some changes wrt EOM behaviour. Distinguish EIO_PENDING from
...
EOM_PENDING. Set up a persistent EARLYWARNING behaviour flag. If
set, EOM behaviour forces a 'short read' to signal logical (as
opposed to physical) end of media. The user application may, of
course, do with this information what it will.
The EARLYWARNING behaviour may be enabled/disabled by a MTIOCTOP
operation. The default action is to not have EARLYWARNING enabled-
but this may be reversed by an option ST_ENABLE_EARLYWARN in
the kernel build.
1998-07-30 00:55:20 +00:00
mjacob
4205ca3d2a
opt_scsiverbose.h now is opt_scsi.h and contains the defopted
...
SCSIVERBOSE and the new ST_ENABLE_EARLYWARN.
1998-07-30 00:49:19 +00:00
fvdl
d40e353fa6
Add NOLUNS quirk for the UMAX Astra 1220 scanner.
1998-07-30 00:00:06 +00:00
augustss
a0803787f7
Add functions to execute asynchronous requests and use these from
...
interrupt context.
[I had some feline debugging help here. I noticed that every time Kem,
our kitty, jumped onto the USB keyboard the machine crashed.]
1998-07-29 20:50:11 +00:00
augustss
f453d02883
Make sure to report wheel movements.
1998-07-29 20:44:32 +00:00
pk
4f2fd378bb
Use sbus_destroy_attach_args().
1998-07-29 18:33:27 +00:00
pk
1d8ad313ab
`struct rom_range' => `struct sbus_range'
1998-07-29 18:32:54 +00:00
pk
9a7ffd5724
Move some Sbus structures in here.
...
* attach arguments now directly support multiple register and
interrupt sets.
* address translation (`ranges') has been made bus-specific
* introduce sbus_destroy_attach_arg() to clean up after
attaching an an Sbus device.
1998-07-29 18:30:20 +00:00
augustss
d6a8a4f025
Don't print chip name in attach, the ad1848 attach already does.
1998-07-29 11:39:25 +00:00
augustss
0733d4c87f
Do locator related defines using defines from locators.h rather
...
than literal constants.
1998-07-28 22:01:24 +00:00
thorpej
99b10d9e98
Regen.
1998-07-28 21:51:34 +00:00
thorpej
463fc03c76
Add the IMS TwinTurbo 128M graphics board.
1998-07-28 21:50:30 +00:00
augustss
ae97a4cbf5
Support for USB mice with Z axis or wheel.
1998-07-28 21:21:47 +00:00
augustss
20f454ae1c
KNFify.
1998-07-28 20:58:39 +00:00
drochner
0a5abbe31d
Reset the mouse in attach(); Bog knows what other drivers did to it
...
in their probe()s.
Clean up some "pms" vs. "psm" naming confusion.
1998-07-28 20:18:36 +00:00
is
0d257affa0
Add some constants.
1998-07-28 16:03:49 +00:00
is
a374ab61d8
ic/i82595reg.h
1998-07-28 16:02:34 +00:00
is
4fb93c48ec
Remove dead code.
1998-07-28 14:44:46 +00:00
augustss
4e690f3740
Improve chances of success and make it compile again.
1998-07-28 14:16:29 +00:00
pk
4129139031
Supported medium is IFM_10_5
1998-07-28 12:22:37 +00:00
augustss
daed8d7ce1
Fix obsolete code in waiting for calibration on the ad1848.
...
(Sigh, the ad1848 driver should be rewritten.)
1998-07-28 12:13:34 +00:00
augustss
b068e817d9
Add missing .include <bsd.kinc.mk>
1998-07-28 08:45:46 +00:00
pk
2c49105697
Fix #includes.
...
Remove #ifdef SUN4C & SUN4M.
1998-07-28 00:44:39 +00:00
pk
5bf04ed2be
Add `sbus' to SUBDIRS.
1998-07-28 00:36:31 +00:00
pk
783e554213
One header to install.
1998-07-28 00:33:03 +00:00
pk
315e1a28de
Fix #includes
1998-07-28 00:31:42 +00:00
pk
fd9017990f
Magma driver has been moved to <dev/sbus>
1998-07-28 00:17:47 +00:00
pk
48ca0ed59d
Lance front-ends on Sbus moved here.
1998-07-27 23:56:26 +00:00
pk
947f2424a8
Add `le at sbus', `le at lebuffer' and `en at sbus'.
1998-07-27 23:54:58 +00:00
pk
fa624fd99a
Moved to dev/sbus from arch/sparc/dev
...
Get headers from <dev/sbus>
1998-07-27 23:47:07 +00:00
tron
a79f26fe76
Regen from pcidevs.
1998-07-27 22:58:43 +00:00
tron
04affecc7a
"Brooktree Brooktree Bt848" -> "Brooktree Bt848"
1998-07-27 22:58:07 +00:00
drochner
ee4bf8991d
add support for native "Intelli" mice (wheel = z axis)
1998-07-27 22:36:23 +00:00
drochner
1b27072062
add zero z axis argument
1998-07-27 22:34:30 +00:00
drochner
87ad9bca7a
add third axis for pointing devices (flying mice)
1998-07-27 22:33:22 +00:00
tron
0d386417e9
Regen from pcidevs.
1998-07-27 21:37:17 +00:00
tron
d54ccbde1a
Add Brooktree Bt848 and BT849 video capture chips.
1998-07-27 21:34:11 +00:00
augustss
e8e8a975af
Regen.
1998-07-27 20:04:10 +00:00
augustss
6585f9ebc1
Add S3 SonicVibes.
1998-07-27 20:02:27 +00:00
pk
81ff4e8b36
qec device register definitions (from OpenBSD).
1998-07-27 19:27:19 +00:00
pk
3252d462bb
qec `bus' driver; much like lebuffer.
1998-07-27 19:26:32 +00:00
pk
08a95cc833
Change copyright.
1998-07-27 19:25:34 +00:00
pk
e68ada23e2
Move "sbusvar.h" hack in here.
...
Also define SBUS_BURST_* values here.
1998-07-27 19:15:40 +00:00
pk
3299f8cfe4
Get headers from dev/sbus.
1998-07-27 19:13:45 +00:00
pk
b1fe2da904
get headers from dev/sbus
1998-07-27 19:13:06 +00:00
pk
444f71921e
sbus configuration file.
1998-07-27 19:04:14 +00:00
augustss
47f172660c
Make ums attach to wsmouse only.
1998-07-27 18:51:32 +00:00
thorpej
e3eed5f706
Fix cfattach naming botch.
1998-07-27 18:27:36 +00:00
drochner
1e737a4010
add definition for pointing device's absolute z coordinates
1998-07-27 18:17:08 +00:00
drochner
e6f2ea1f40
define a z axis for pointing devices which support this
1998-07-27 16:59:22 +00:00
mrg
53017397ee
move these files to sys/dev/sbus. currently uses a hack to access the correct "sbusvar.h" XXX fix me.
1998-07-27 05:43:58 +00:00
thorpej
8db7ed28a4
ISA with OpenFirmware configuration glue for the CS8900 Ethernet driver.
1998-07-27 01:26:43 +00:00
thorpej
0f7ec45c46
Add CS8900 Ethernet driver, and ISA front-end.
1998-07-27 01:22:41 +00:00
thorpej
e9128957a6
ISA front-end for CS8900 driver.
1998-07-27 01:20:43 +00:00
thorpej
f68dfbe928
Sigh, make this work with the i386 bus_space functions (which have debugging
...
glue in them, and thus subtle syntax quirks).
1998-07-27 01:20:19 +00:00
thorpej
2d588abad8
Split up the Shark CS8900 driver into front-ends and core back-end (which
...
is here, since the chip can only live on an ISA bus; only the autoconfig
glue is different).
1998-07-27 01:08:51 +00:00
augustss
638fb6a638
A first stab att supporting console access with a USB keyboard.
1998-07-26 17:42:48 +00:00
explorer
ab207dc49d
add ntwo* at pci? function ?, a T1 network driver.
1998-07-26 03:28:28 +00:00
explorer
c5e450957a
add (hopefully) bus-independent hd64570 driver, for the Hitachi serial
...
controller chip.
1998-07-26 03:26:57 +00:00
augustss
4e1976a433
Use PCI class/subclass/interface to match USB host controllers instead
...
of vendor/product id. This makes the probe find more controllers
without recompilation.
1998-07-26 00:40:59 +00:00
augustss
72de215752
Use PCI class/subclass/interface to match USB host controllers instead
...
of vendor/product id. This makes the probe find more controllers
without recompilation.
1998-07-25 23:23:01 +00:00
explorer
12f40f6481
commit this so it gets the right generated from tag
1998-07-25 23:12:16 +00:00
augustss
7c50ea1e65
Insert lots of ``#if NWSMOUSE > 0'' and ``#if NWSDISPLAY > 0'' to make it
...
possible to have a wsmouse and/or wskbd without having a wsdisplay.
1998-07-25 20:02:20 +00:00
augustss
3ff58ab530
Add wscons attachments for USB keyboard.
1998-07-25 15:36:30 +00:00
augustss
6532f4f144
Add an ioctl() to get host controller statistics.
1998-07-25 15:22:11 +00:00
augustss
2c5f27cf9d
Don't print device class in attach message.
1998-07-25 15:19:09 +00:00
augustss
8bafec3cec
I forgot to commit these when usb_mem was added.
1998-07-25 15:15:39 +00:00
explorer
9043581b85
define RISCom and RISCom N2 product
1998-07-25 11:57:50 +00:00
augustss
67ec8587a0
Provide wsmouse attachment for the USB mouse driver.
...
XXX Keep /dev/ums* for now since XFree86 does not understand wsmouse yet.
1998-07-25 01:46:38 +00:00
thorpej
930937fd49
Define the CS8900 memory size, and macros to test for valid memory
...
base and IRQ.
1998-07-25 00:41:47 +00:00
augustss
b916de0f86
Add special memory allocation routines that supports allocation
...
DMA-able memory in small chunks (USB uses a lot of 8 byte chunks).
Using the bus_dma functions directly is inefficient.
1998-07-24 21:09:07 +00:00
augustss
06e7ed2009
Make sure requests are aborted properly when the pipe is aborted.
1998-07-24 21:02:51 +00:00
augustss
1a5dd77c56
Punt if the mouse reports absolute coordinates.
1998-07-24 20:59:57 +00:00
augustss
b79d954aac
Let hid_locate() return the item flags as well as the position.
1998-07-24 20:57:46 +00:00
drochner
658e297dd6
Initialize the new "dispoffset" (but don't use it for anything fancy).
1998-07-24 16:22:51 +00:00
drochner
3d545acb51
Overload the generic "copyrows" function by a private one which implents
...
a "fast scroll" by setting the display start in memory.
(Only implemented for "scroll up" because this is more used. "scroll down"
is easy to add.)
This moves the semantics of "copyrows" to something like "moverows";
the contents of the new visible lines at the bottom is undefined.
The emulations can live without the original "copy" semantics.
1998-07-24 16:20:14 +00:00