c56418af73
some improvements from freebsd/openbsd
...
- replace the unused fs_headswitch and fs_trkseek with fs_id[2], bringing
our struct fs closer to that in freebsd & openbsd (& solaris FWIW)
- dumpfs: improve warning message when cpc == 0
2001-08-30 14:37:25 +00:00
10516949e9
add some sun4/sun4c/sun4m compat code so we can build 32 bit kvm. (these files are not even vaguely syncable.)
2001-08-30 09:32:23 +00:00
2228225e5c
Add some register definitions for TI PCI12XX and Toshiba ToPIC.
...
Add ToPIC97 and ToPIC100 chip initialisation routine.
Add more TI PCI12XX chip initialisation.
2001-08-30 09:20:17 +00:00
c535133897
- minor whitespace and comments cleanup
...
- replace "filesystem" with "file system"
- fix spelo (from freebsd)
2001-08-30 08:31:25 +00:00
1de4b3e2e0
min() -> MIN() (on general principles)
2001-08-30 03:55:42 +00:00
eccd469cf7
min() -> MIN()
2001-08-30 03:47:53 +00:00
89829e4825
defines for OPENPIC_ICR / serial mode.
2001-08-30 03:08:52 +00:00
0ea9d87eb1
Create an opt_openpic.h and add both OPENPIC and OPENPIC_SERIAL_MODE to it.
2001-08-30 03:08:22 +00:00
6017201500
Rename PCI_MAPREG_TYPE_ROM to PCI_MAPREG_ROM_ENABLE to keep up with pciconf.?
2001-08-30 02:53:56 +00:00
e4f8f2f2da
Respect __PCI_BUS_DEVORDER.
...
If all devices can handle 66MHz, then use 66MHz.
Triple the number of configured I/O ranges that we can handle on a bus
(8 was insufficient--originally didn't consider multifunction devices)
Allow one to specify which types of memory to configure, I/O, ROM, or
MEM--for example, one could configure only ROM or only non-ROM.
Ensure that the ROM is disabled if we're not configuring it.
Only set PCI_COMMAND_IO_ENABLE/PCI_COMMAND_MEM_ENABLE if there are valid
memory ranges configured.
2001-08-30 02:52:41 +00:00
f05abdee3c
- Change default time frequency to 100MHz from 66MHz.
...
- Support the serial mode interrupts (with a kernel configuration option)
on the Sandpoint X3.
- Initialize cpu_timebase.
- Enable tulip driver.
2001-08-30 02:08:42 +00:00
e4892d7157
When invaliding single icache line on XScale, the branch target buffer
...
also needs to be invalidated. Also, but in the right sequence to empty
the pipeline on XScale.
2001-08-30 01:15:39 +00:00
352f878e45
Gah, fix a number of channel status/select bitfields.
2001-08-29 23:32:21 +00:00
4666070137
Correct a comment: The address of the signal handler is passed to the
...
sigcode trampoline in pv (t12), not a3, and has been since the
beginning of time.
2001-08-29 20:17:08 +00:00
c50646a1f3
Add adw
2001-08-29 17:37:47 +00:00
665cc59e75
Ensure that data accessed by the ADW driver in memory is in
...
little-endian byte-order. This should work out to be a no-op
for LE systems, and allows BE systems to use the board.
Tested on PPC, reviewed by Dante.
NOTE: The board/microcode does have a BIG_ENDIAN mode of operation,
but it's not well-documented. That might be interesting to investigate
at some point in the future, though.
2001-08-29 17:25:03 +00:00
a0f0f74348
Print extra information on machine check (AS500, AS600).
2001-08-29 14:14:33 +00:00
1b6311c365
make 4.3 binaries run once again on the vax. tested with
...
omagic/nmagic/zmagic binaries from guest account on
Lord Isildur's tahoe system (thanks). enabled if both
COMPAT_43 and COMPAT_VAX1K are defined.
basically rewrote exec_vax1k_prep_anymagic() to handle more
file formats. we remove vax1k_subr.c because we now use the
standard vmcmd_readvn function.
XXX: suspect the code for MID_VAX1K NMAGIC binaries is wrong,
need a binary to confirm this... the old code did not pad the
end of the text segment to a page boundary, and that seems wrong.
you definitely need to pad it on a 4.3BSD NMAGIC binary and i
don't see why MID_VAX1K should be different?
2001-08-29 03:43:53 +00:00
de0feee64b
Regen.
2001-08-28 23:54:14 +00:00
7cba152e7c
Add more Apple devices.
2001-08-28 23:53:14 +00:00
14f612c5b3
- Swap the bytes OR'd into init_ladrf[], for big-endian machines.
...
- Make sure to sync the init block.
Pointed out by Izumi Tsutsui.
2001-08-28 15:22:30 +00:00
ab8b3ce5d3
Remove descriotion about homegrown sonic driver from TODO list
...
since it has been replaced with the MI driver.
2001-08-28 15:17:47 +00:00
2e4bdfe678
Add a TODO item: Do this in 2 passes. One pass that configures the
...
bus (and optionally maps expansion ROMs), and an optional second
pass to disable expansion ROMs that are mapped. This would allow
MD code to possibly execute the expansion ROMs (possibly in an x86
emulator) to configure a device (e.g. a VGA card, which pretty much
needs to be configured by its ROM).
2001-08-28 15:13:48 +00:00
cdf824bfb6
If MD code doesn't provide pci_conf_hook(), then default to not mapping
...
the expansion ROMs on cards, since address decoders may be shared between
the ROM and PCI memory space on some cards (i.e. "only map the ROM if you're
going to use it, and then unmap it when you're done" is the intended
usage).
2001-08-28 15:09:10 +00:00
b14bf2ceef
Fix incorrect parentheses.
2001-08-28 14:51:28 +00:00
fdb02063d2
Print "auto-FDX" for the second "autoselect" instance. Pointed out
...
by Izumi Tsutsui.
2001-08-28 14:15:18 +00:00
d46bbf4926
In the absense of any objection, move the rbus I/O range to 0x600-0x700
...
in the ARMADA config. On the M700 at least, the SMBus host controller lies
it 0x4000 (the beginning of the range allocated by default to rbus), and
stomping all over it causes bad things to happen.
2001-08-28 09:25:52 +00:00
df0327518e
Add evbarm, ibmnws, mvmw88k, m88k
2001-08-28 05:59:48 +00:00
dfbb14ad68
__syncicache needs to be exports to userspace as well as the kernel.
2001-08-28 03:03:43 +00:00
2879b54794
Enable some additional useful options like NFS_SERVER and RAID.
2001-08-28 02:43:49 +00:00
2d4d9f7fdc
Stop pci_configure_bus() from mapping PCI expansion ROMs. Fixes problems
...
with at least some sip (and possibly siop) cards on the walnut.
2001-08-28 01:35:06 +00:00
8949c133a4
Get rid of debug printf.
2001-08-27 22:38:34 +00:00
8afb9f3591
Use #include <machine/intr.h> instead of #include <machine/cpu.h> to
...
improve portability.
2001-08-27 22:37:33 +00:00
494454a87d
Comment out the hme driver; it's not totally MI yet.
2001-08-27 22:25:42 +00:00
b5937bf1d0
Add some missing network drivers.
2001-08-27 22:23:47 +00:00
7b55182d7d
Remove an unneeded #include. This makes the file compilable on more
...
platforms.
2001-08-27 22:18:49 +00:00
3346d43a5b
Make it compile.
2001-08-27 22:17:29 +00:00
1930fec887
New driver for the AMD PCnet-PCI family of Ethernet chips. This
...
driver uses direct DMA to mbufs (like other PCI network drivers,
and unlike the old "le at pci" driver), and also supports communication
with the MII-connected PHYs on the 10/100 boards.
2001-08-27 19:42:18 +00:00
228006bcc3
Add the driver for the LMC WAN adapter.
2001-08-27 18:52:09 +00:00
b22154dd79
Make the LMC driver bus_dma and endian clean (big-endian mode does not appear
...
to work on LMC cards).
2001-08-27 17:47:35 +00:00
97e7cd9cf9
For hayes esp card, set prescaler if specified rate is grater than 115200.
2001-08-27 14:27:01 +00:00
4f924773b7
Regen.
2001-08-27 14:10:20 +00:00
02d004f2c8
Sort Intel products by id and kill duplicated entries.
2001-08-27 14:04:47 +00:00
405f874060
extent_alloc_subregion shouldn't allocate a region pasts the end of subregion.
2001-08-27 13:35:44 +00:00
1676190cef
adjust the hack to build the SRT*.o files.
2001-08-27 13:07:03 +00:00
3b4f143fd8
- Correct a value of subend.
...
Pointed out by enami tsugutomo <enami@but-b.or.jp>.
2001-08-27 13:02:12 +00:00
0432180062
Add 7 new PHYs.
2001-08-27 12:08:00 +00:00
37fb92dcab
Remove unused entries from the pcb. This is with a long term view of merging the arm26 and arm32 pcb's.
2001-08-27 11:39:43 +00:00
13bc6b2e19
Use PWAIT for the lock, not 0.
2001-08-27 11:24:38 +00:00
31d98218e8
Add support for ALi M1543 in pcibios.
2001-08-27 08:21:20 +00:00
ffb2d70070
Regen.
2001-08-27 08:03:37 +00:00
8fb0b8c6dc
Add a DPT PCI-PCI bridge.
2001-08-27 08:02:52 +00:00
bbe2823aee
ANSIfy, KNF.
2001-08-27 06:18:08 +00:00
0667ea6c1c
text address is 0x90000, not 0x9000.
2001-08-27 04:53:27 +00:00
2dec1a929d
handle a locking problem where the second (or later) call in the loanentry
...
loop returns 0. loanentry was returning >0, but was unlocking the maps
(because of the zero). reworked to avoid this. problem reported by
chuck silvers. also clarify a comment that jdolecek asked about.
2001-08-27 02:34:29 +00:00
df657b5158
Count and record memory error interrupts with evcnt(9).
2001-08-27 02:00:16 +00:00
edc83ba7f4
Add xscale cpufuncs (using the sa110 ones when they are identical).
2001-08-27 00:00:27 +00:00
6f08a31e06
Fixed a lot of mistakes in #define's (hes values instead of octal)
2001-08-26 21:17:52 +00:00
e8f317bba8
Add xscale cpu functions
2001-08-26 19:41:57 +00:00
4e642cc5fd
Add i80312 register definitions (just registers for now).
2001-08-26 19:25:47 +00:00
08f4bcddf3
files file for xscale (i80312 aka iopxs)
2001-08-26 19:19:09 +00:00
6ae6d7c980
Preliminary work on Linux/Mips emul
2001-08-26 18:53:20 +00:00
d77c828c64
Fixed a bug processing options - we were ORing
...
an uninitialized auto into boothowto.
2001-08-26 18:39:15 +00:00
abf3af624a
Preliminary work on Linux/Mips emul. More to come soon...
2001-08-26 18:11:25 +00:00
34e3550db4
Moved LINUX_NCCS from MI file to MD file, because the value is different
...
on MIPS and sparc machines.
2001-08-26 17:26:31 +00:00
8d2d7fdf71
Fiexed a typo in a #define
2001-08-26 17:17:55 +00:00
0e6de337a2
Preliminary work on Linux/mips compat, more to come soon...
2001-08-26 17:12:56 +00:00
6682ab1fbf
Under __ELF__, getvbr must return its pointer value
...
in %a0, not %d0. This fixes many problems with
getting the PROM to halt and reboot the machine.
2001-08-26 17:12:11 +00:00
d1fd72fba1
Fixed a typo in struct naming. This does not seems to impact anything.
2001-08-26 17:08:09 +00:00
21f970e367
Preliminary work on Linux/Mips emulation, more to come soon...
2001-08-26 17:03:37 +00:00
0f65ff9afc
Preliminary work on Linux/mips compatibility, more to come soon...
2001-08-26 16:41:58 +00:00
9d7facdb6e
Yanking a pmax-specific header should not have broken Alpha
...
compiles! Remove all pmax include files, copying 'struct pdma'
from <pmax/dev/pdma.h> into sccvar.h.
XXX: diffs between current pmax and alpha scc.c are almost as large
as the files themselves. Should clean this up...
2001-08-26 16:39:56 +00:00
de40f400dd
Preliminary work on Linux/mips compatibility, more to come soon...
2001-08-26 16:33:01 +00:00
62c3bdeea4
sysctl(2) -> sysctl(3) (in comments)
2001-08-26 16:22:20 +00:00
6ca52a1743
Preliminary work on Linux/mips compatibility, more to come soon...
2001-08-26 16:21:56 +00:00
0a50dcbab4
Preliminary work on Linux/mips compatibility. More to come soon...
2001-08-26 16:18:03 +00:00
e1921cd311
Add one more pmap_update() missed in rev 1.14.
2001-08-26 16:05:25 +00:00
fcf1fa0015
Preliminary work on Linux/mips compatibility, more to come soon...
2001-08-26 15:41:14 +00:00
e712414a48
Preliminary work on Linux/mips compatibility. More to come soon...
2001-08-26 15:38:44 +00:00
a410e315dd
Preliminary work on Linux/mips compatibility. More to come soon...
2001-08-26 15:24:24 +00:00
b2ca6f9c3b
Preliminary work for Linux/Mips compatibility, more to come soon.
2001-08-26 15:16:42 +00:00
6825e7d5ea
Garbage-collect pcb_onfault_lj, since it's unused and doesn't exist on
...
arm32 ports.
2001-08-26 14:15:07 +00:00
66da5fecf2
KASSERT the presence of a FIQ downgrade handler before we try to call it.
2001-08-26 12:25:38 +00:00
9c45cae8df
Make cmos_read() and cmos_write() globally visible, and make the instance
...
they operate on implicit. Also, stop abusing cf_unit, and remove a vast
swathe of unused code.
2001-08-26 12:24:24 +00:00
0ff76b5187
Add fiq_off() and fiq_on().
2001-08-26 12:20:59 +00:00
e309f80412
remove bogus comment. noted by Tetsuya Isaki <isaki@par.odn.ne.jp> in private email.
2001-08-26 12:14:22 +00:00
5bfd050aa7
Fix typo.
2001-08-26 12:05:55 +00:00
cddf6cf55b
Switch to MI SCSI and drop old pmax MD SCSI support completely.
2001-08-26 11:47:18 +00:00
47bb32d470
Use the common Makefile.powerpc.
2001-08-26 11:00:07 +00:00
7ec91f6656
Include ${THISPPC}/conf/Makefile.${TARGET_MACHINE}.inc if it exists (ala
...
mips' Makefile.mips).
2001-08-26 10:59:26 +00:00
a026d7bc78
handle unmanaged pages correctly in pmap_remove_pv(),
...
fixes crashes when exiting X.
2001-08-26 06:03:11 +00:00
90ce2985e4
Do a more accurate compare.
2001-08-26 05:46:31 +00:00
5b0492f05e
Fix debug printf.
2001-08-26 05:44:46 +00:00
ba61a3cc19
Fix memsize_scan() - cut and pasted code can't use physmem because it hasn't
...
been set yet.
2001-08-26 05:16:52 +00:00
5911b9a67f
Make compile with -Wmissing-prototype -Wstrict-prototypes
2001-08-26 02:49:18 +00:00
449a758850
Add EVCNT_TRAP event counter type.
2001-08-26 02:48:12 +00:00
550ffff41b
Make all powerpc ports use a common Makefile.powerpc (except walnut)
...
Enforce -Wmissing-prototypes -Wstrict-prototypes for all ppc ports.
Split out macppc cpu support and make common to mpc6xx ports. Make
other mpc6xx ports use it. Add evcnts for mpc6xx traps.
2001-08-26 02:47:33 +00:00
a65671c2a9
don't mess with vnode holds or buffer lists for swap i/os.
...
fixes problems with leaked vnode holds.
2001-08-26 00:43:53 +00:00
d0e2aef09a
add register prefixes. no change in generated .o files.
2001-08-25 23:08:39 +00:00
e2ad09e624
synchronize (addition of repulse driver).
2001-08-25 21:19:20 +00:00
bd5a12de41
Driver for the ALiENDESiGN Repulse board.
...
- only 8/16 bit precision supported
- no support for the Repulse special S/P-DIF I/O yet
- I think ac97.c needs some work.
2001-08-25 21:15:44 +00:00
753f885263
add register prefixes in asms.
2001-08-25 21:14:44 +00:00
db7d3946ac
add register prefixes. no change in generated .o file.
2001-08-25 21:08:02 +00:00
ed1e153702
use the correct symbol for multi-include protection.
2001-08-25 20:37:46 +00:00
3ec769dff6
Make this compile with -Wmissing-prototypes by adding appropriate
...
cdev_decl, bdev_decl, cons_decl
2001-08-25 19:05:04 +00:00
d38ac3477c
remove -mwarn-no-reg-prefixes, it doesn't work with new gas.
2001-08-25 18:57:37 +00:00
6fbd291760
add COMPAT_AOUT_M68K stuff.
2001-08-25 18:37:20 +00:00
89893e42b7
ANSI'ify.
2001-08-25 18:04:01 +00:00
3f9dc1b3e8
In ioc_attach(), use ioc_irq_setmask() and ioc_fiq_setmask() rather than
...
twiddling registers directly. Also, remove an outdated comment.
2001-08-25 17:59:38 +00:00
7da5d70599
Add fiq_on() and fiq_off(), to enable and disable FIQs at the CPU.
...
Call fiq_off() from start() and fiq_on() from cpu_configure(), so we're certain
not to get any FIQs during autoconfiguration.
2001-08-25 17:55:24 +00:00
bf5b029d44
Make sure that soft interrupts are initialised in a "not pending" state.
2001-08-25 17:45:32 +00:00
e63635fdcd
update copyright notices.
2001-08-25 15:06:02 +00:00
71552c86a0
s/sparc/sparc64/ in a printf()
2001-08-25 15:05:22 +00:00
05403a4b92
turn off compat & some exec options
2001-08-25 15:04:26 +00:00
48fcc1a2c3
update a comment about R_UA_32 relocs.
2001-08-25 15:03:19 +00:00
ed5e27cc44
Increase the size of a jmp_buf when using ELF, since this will be our last
...
chance to do so for a while. We don't use the extra space yet, but VFP
support is likely to need it.
2001-08-25 14:45:59 +00:00
11be81ff63
Regen.
2001-08-25 06:00:01 +00:00
c783391d0a
Note compatibility with the Am79c874, and document some more
...
registers.
2001-08-25 05:57:12 +00:00
9d50e2e95a
Back out previous; closer inspection of the manual reveals that the
...
Am79c874 has the same ID register contents as the AC101.
2001-08-25 05:55:19 +00:00
820809faec
Regen; added AMD Am79c874 NetPHY-1LP.
2001-08-25 05:45:25 +00:00
05e4fb8e6c
Add AMD Am79c874 NetPHY-1LP.
2001-08-25 05:44:59 +00:00
85a7cdc261
Driver for the 10BASE-T portion of the AMD 79c901 PHY.
2001-08-25 04:06:26 +00:00
158cb83996
Add a driver for generic HomePNA PHYs. Currently supports the HomePNA
...
portion of the AMD Am79c901.
2001-08-25 03:21:38 +00:00
9fe2378664
For HomePNA PHYs, don't register it w/ ifmedia as 10BASE-T, but
...
rather as HomePNA1.
2001-08-25 01:57:56 +00:00
f7f8866fea
Add a flag that indicates that a device is a HomePNA device.
2001-08-25 01:41:17 +00:00
684a4b71e3
Regen; improve AMD PHY names.
2001-08-25 01:39:59 +00:00
9d04a424fe
Improve the AMD PHY names.
2001-08-25 01:39:22 +00:00
b6aa674493
Driver for the Altima AC101 10/100 Ethernet PHY.
2001-08-24 17:54:32 +00:00
20039b1dd8
Use the PROM bitmap, if available, to determine available memory. Also
...
add support of multiple memory segments so machines that allow mixed
memory sizes can utilize all available memory.
2001-08-24 15:33:16 +00:00
45e61b5399
Buf fix: use PWAIT priority and do not set PCATCH.
2001-08-24 10:55:53 +00:00
251b3464be
heirarchy -> hierarchy
2001-08-24 10:24:45 +00:00
cb3b720183
disable mmap() for LFS until it is fixed.
2001-08-24 06:42:46 +00:00
6621bd5a97
More useful definitions for CSR80.
2001-08-24 05:04:40 +00:00
ba2c8088f4
use pmap_k* for buffer cache pages.
2001-08-24 04:34:25 +00:00
bcdac55add
Fix the display of the CPU clock speed.
2001-08-24 02:11:01 +00:00
8375df5b6a
Whitespace nits.
2001-08-24 02:07:34 +00:00
c8d4938fb4
Fix compile problems for kernels configured for MIPS1 support only.
...
Patch from Thilo Manske in PR #13703 .
2001-08-24 00:22:53 +00:00
0f89153491
Oops, TMD/RMD byte count masks were one bit shy (and it makes a big
...
difference when the value in the field is actually the two's complement
of the buffer length).
2001-08-24 00:16:25 +00:00
1007ef1595
Fix backwards compare. (From Jason Wright)
2001-08-23 16:14:12 +00:00
d400c78e55
Update location of IANA smi-numbers file, since the old one doesn't work any
...
more.
While I'm here, add IANA assignments 0xbe--0xc5.
2001-08-23 14:52:21 +00:00
e20342e78d
Fix a bug introduced when machine_type.h was removed.
...
Now the kernel can read symbol table again.
2001-08-23 14:17:27 +00:00
b6e4b26d3b
Check 80 pins cable in acard_setup_channel() for Acard ATP860.
2001-08-23 10:02:25 +00:00
c540e9e70b
add a missing pmap_update().
2001-08-23 06:18:47 +00:00
9fa41ab3b9
use cli/sti instead of splhigh/splx for MCOUNT_ENTER/MCOUNT_EXIT.
...
this makes clearer how much time mcount() is really taking.
2001-08-23 06:17:00 +00:00
ce0d046061
Regen; recognize the 79c972's 10BASE-T interface mapped onto MII.
2001-08-23 04:47:36 +00:00
b52818d607
The Am79c972 PCnet-FAST+ has its built-in 10BASE-T interface mapped
...
onto the MII bus. Recognize it.
2001-08-23 04:47:05 +00:00
29bfa727c1
Regen; take part numbers out of PCnet-PCI product descriptions.
2001-08-23 03:42:26 +00:00
16efbbf387
Take part numbers out of the PCnet-PCI product descriptions.
2001-08-23 03:41:36 +00:00
2c469bbf82
Regen; Add Promise ATA/100 TX2.
2001-08-23 03:32:24 +00:00
915a8ef871
Add Promise ATA/100 TX2 device ID.
2001-08-23 03:31:55 +00:00
4d1509970e
do not try to bring IPv6 up on bridge*.
2001-08-23 02:58:24 +00:00
4d28b238b5
Add MX (PMAG-A) and TX (PMAG-RO/PMAG[B]-J) supports and replace CX
...
(PMAG-B) code with one found in dev/tc/ directory.
2001-08-23 01:29:31 +00:00
9a409cff3e
Add MX (PMAG-A), CX (PMAG-B), TX (PMAG-RO/PMAG[B]-J) TC framebuffer
...
supports. None of them has any acceleration capability.
2001-08-23 01:16:52 +00:00
2697773fb1
IFQ_PURGE cannot be used against ifqueue. use IF_PURGE.
2001-08-23 00:56:03 +00:00
d98bf76f56
Fix bootstrap loss of memory. Fix pmap_activate problem. Revamp debug
...
messages.
2001-08-22 22:17:57 +00:00
28c81ffc15
7450 requires a sync before the the isync (MPC7450UM - 3.4.4.8)
2001-08-22 21:19:58 +00:00
ae5ab93687
Add 7450 recognization. 7450s use NAP mode. print out HID0 register
...
contents.
2001-08-22 21:09:05 +00:00
076780a19c
Include the 7410/7450 hid definitions
2001-08-22 21:05:25 +00:00
15dcb4a98e
Link the kernel at 1MB.
2001-08-22 19:44:47 +00:00
9f019df56f
Allow a keypress on the console to transition from "halted" to "returning
...
to monitor".
2001-08-22 19:13:09 +00:00
f0ea5cb1e9
Don't need to do the Alpha boot block checksum here :-)
2001-08-22 17:53:44 +00:00
5366e197e2
More comment changes: 90x[B] -> 90x[BC]
2001-08-22 15:39:04 +00:00
d08ed3cb49
90x[B] -> 90x[BC]
2001-08-22 15:28:57 +00:00
e380d9806e
devclass of sci[f] is tty
2001-08-22 13:32:45 +00:00
dc0e4c0679
Cosmetic cleanups:
...
- cominit() is local to com.c, remove prototype from comvar.h.
- Don't prototype comstop(), cdev_decl(com) does this.
- Don't use a block device switch table declaration(!).
- No need to include "com.h".
2001-08-22 12:44:10 +00:00
a0fdfb54e0
Implement/fix FDDI, receive checksums, media selection and a ton of other
...
stuff.
2001-08-22 09:43:15 +00:00
1d6329bb04
Parameter group changes:
...
- Do FIELD_SET correctly for scalar types.
- Add some basic table ops.
- Push error reporting back into iop.c.
- Add some field index and (yet more) LAN defs to i2o.h.
2001-08-22 09:42:05 +00:00
153449a2b4
Restore icsr value assignment op which was lost since r1.21.
2001-08-22 09:20:38 +00:00
de250bca38
copyright clarification (the skeleton file is in public domain)
2001-08-22 08:54:51 +00:00
9fac675c1e
Forgot to commit changes of intrcnt[] array and its indices.
2001-08-22 08:23:09 +00:00
9fe945f2fe
sync argument/return type of [hn]to[nh][ls] to XNET 5.2 (uint{16,32}_t).
...
as discussed on tech-net.
2001-08-22 07:42:07 +00:00
d3320a155b
NetBSD/pmax now has GENERIC_SOFT_INTERRUPTS.
2001-08-22 06:59:38 +00:00
bd799bf74f
Use ri->ri_hw field for TC module base address.
2001-08-22 05:15:58 +00:00
1df3ced126
Move small storage for ev_name string into tcds_softc.
2001-08-22 05:00:27 +00:00
b7f1b6d54b
Nuke fb_devconfig data structure which was found unnecessary to have.
2001-08-22 02:24:29 +00:00
17c22a634f
Set PCI_NETBSD_ENABLE_IDE to 0x01, so that the first IDE channel
...
will be enabled.
2001-08-22 00:42:43 +00:00
f5e6f05c1a
If PCI_NETBSD_ENABLE_IDE is set, enable the PIIX{3,4} southbridge
...
IDE channels on the P-5064 and P-6032, since PMON doesn't do it
for us (thus causing the `pciide' driver to ignore them).
2001-08-22 00:40:38 +00:00
10591340be
Add a PCI_NETBSD_ENABLE_IDE option, that goes along with
...
PCI_NETBSD_CONFIGURE, which tells machine dependent code
to enable the specified (by a bitmask) PCI IDE channels in
the southbridge, in the event that system firmware does not
do so.
2001-08-22 00:36:57 +00:00
35228f775a
Two related changes:
...
Make splhigh disable IRQs at the CPU rather than at the IOC. This has the
potential to be faster, and more importantly ensures that splhigh() blocks
FIQ downgrades.
Have a variable which indicates that a FIQ downgrade is required, and ensure
that the IOC "force IRQ" bit is turned on in this case. This ensures that
FIQ downgrades don't get lost if something happens to be fiddling with the
interrupt mask at the wrong moment.
2001-08-21 22:47:17 +00:00
8a979a066f
Change various return sequences to the APCS-32 versions.
2001-08-21 22:42:17 +00:00
1def612c66
Correctly restore the spl if we fail to claim the FIQ.
2001-08-21 22:40:39 +00:00
d987b42429
More PCnet-PCI/ILACC bits.
2001-08-21 16:39:06 +00:00
8b72cec4d8
Add some more PCnet-PCI registers.
2001-08-21 16:37:38 +00:00
429d846242
regen: psion gold card
2001-08-21 16:13:14 +00:00
e62b69f246
add vendor Psion and product Psion Gold Card
2001-08-21 16:13:03 +00:00
d7964c6e78
Initial commit for Xserver support for the wscons interface; it isn't fully
...
functional yet since the keyboard changes are not committed yet but it
should compile and work independently.
Initial support for mouse and screen takeovers / screen hardware scroll
reset is done.
2001-08-21 14:48:54 +00:00
3f9cc29da9
fix vr4181 register offset.
2001-08-21 10:31:26 +00:00
1d4ae5d285
Use int_off_save and int_restore rather than int_off and int_on.
2001-08-20 23:28:05 +00:00
a180b9a8f4
Add fiq.
2001-08-20 23:15:40 +00:00
45b5bdc5e5
Split off the pm_entries array from the rest of struct pmap. This makes
...
memory allocation for it more efficient (since pm_entries is 4096 bytes long),
and will allow pm_entries to be freed for swapped processes.
2001-08-20 23:12:54 +00:00
8ec27f2ebe
Implementation of fiq_{get,set}regs.
...
Also, don't leave space for a FIQ handler in kernels with no FIQing devices.
2001-08-20 23:10:51 +00:00
13f36f67c6
Don't initialise a podule's loader multiple times.
2001-08-20 23:09:12 +00:00
9aa4896361
More FIQ support. This gives me enough to handle FIQs, and to downgrade them
...
to IRQs as necessary. All these interfaces are subject to change in the light
of experience.
2001-08-20 23:08:10 +00:00
1061e51a8a
One from the vaults: Add lint stubs.
2001-08-20 22:56:10 +00:00
140252be2b
Arm has a vac, so we must use pmap_enter/remove for vmapbuf rather than k* versions, otherwise we may not be doing the right caching thing.
2001-08-20 21:52:09 +00:00
04a394787e
Oops, the "auto" capability was getting masked off by mistake.
...
Fixes a panic reported by Chuck Silvers.
2001-08-20 20:22:53 +00:00
b9f24a3dd1
Regen.
2001-08-20 19:29:59 +00:00
69906a3032
Add some entries for the AMD 76x chipset for completeness.
2001-08-20 19:29:08 +00:00
078a9a2206
Netwinders have ISC phys, not LXT phys.
2001-08-20 16:17:12 +00:00
dacf7e8e3d
Don't special case the retry for Media Changed... More later.
2001-08-20 15:45:10 +00:00
c52d355d71
"wierd" is weird.
2001-08-20 12:20:01 +00:00
1e378c4c12
precede, not preceed.
2001-08-20 12:00:46 +00:00
f33f8d5e61
Succeed has two 'c's.
2001-08-20 11:57:34 +00:00
0f95e3da3c
precede, not preceed, and a whitespace fix.
2001-08-20 11:57:02 +00:00
d375535396
Fix typo in comment (suceed).
2001-08-20 11:49:11 +00:00
13499203a2
Two changes submitted by Sergey Svishchev <svs@ropnet.ru>:
...
- Don't send START UNIT upon open if the drive is playing audio (PR 11768).
- If we receive sense indicating that the media changed, retry (PR 8326).
2001-08-20 11:31:10 +00:00
ab54b70cae
Cosmetic change.
2001-08-20 11:20:51 +00:00
a6f7e30eec
Nuke fb_devconfig data structure which was found unnecessary to have.
...
224 byte saving in text+bss, and runtime.
2001-08-20 08:34:39 +00:00
52449ef3bf
Medium Not Present has number of defined ASCQs. Pointed out by Sergey
...
Svishchev <svs@ropnet.ru> in PR 8326.
2001-08-20 07:47:01 +00:00
d861b4992a
Add descriptions for Medium Not Present ASCQs.
2001-08-20 07:41:14 +00:00
0999a72932
The latest EHCI spec is 0.96
2001-08-20 07:16:35 +00:00
b734a361cf
allow SHMMAX, SHMMIN, SHMMNI and SHMSEG to be specified in the kernel config file.
2001-08-20 04:51:17 +00:00
dc4e692845
add a commented "options NETATALK"
2001-08-20 04:49:17 +00:00
fb5869c240
Regen
2001-08-20 03:48:29 +00:00
f0dd0ada57
Add NEC USB2.0 Host Controller
2001-08-20 03:45:55 +00:00
ef0be725b3
if I'm bridging and got a packet to interface address on if A from if B,
...
advertise MAC address for if A with ARP reply.
2001-08-20 03:13:45 +00:00
e556ec903d
fix ALTQ support. less diff with kame. kjc@csl.sony.co.jp.
2001-08-20 02:18:58 +00:00
ffc3e18ad0
typo
2001-08-20 02:07:27 +00:00
9e8e4c5bdc
I was wrong, sh4 does have a VAC.
...
change vmapbuf()/vmunmapbuf() back to using pmap_enter()/pmap_remove().
2001-08-19 20:44:41 +00:00
c489e9bff4
add missing pmap_update().
2001-08-19 18:09:20 +00:00
72b6b0b123
in vunmapbuf(), call pmap_*remove() explicitly since uvm_km_free_wakeup()
...
will soon no longer do it for us.
2001-08-19 18:08:30 +00:00
eddbcd2f47
use pmap_k* in vmapbuf() and vunmapbuf() since there's no VAC on this platform.
...
in vunmapbuf(), call pmap_*remove() explicitly since uvm_km_free_wakeup()
will soon no longer do it for us.
2001-08-19 17:45:57 +00:00
dd3f84513a
typo in previous.
2001-08-19 17:45:15 +00:00
316cd176c8
in vunmapbuf(), call pmap_*remove() explicitly since uvm_km_free_wakeup()
...
will soon no longer do it for us.
2001-08-19 17:43:44 +00:00
17d06a7ad7
use pmap_k* in vmapbuf() and vunmapbuf() since there's no VAC on this platform.
...
in vunmapbuf(), call pmap_*remove() explicitly since uvm_km_free_wakeup()
will soon no longer do it for us.
2001-08-19 17:37:35 +00:00
b356420a02
in vunmapbuf(), call pmap_*remove() explicitly since uvm_km_free_wakeup()
...
will soon no longer do it for us.
2001-08-19 17:36:28 +00:00
2cdad949d0
use pmap_k* in vmapbuf() and vunmapbuf() since there's no VAC on this platform.
...
in vunmapbuf(), call pmap_*remove() explicitly since uvm_km_free_wakeup()
will soon no longer do it for us.
2001-08-19 17:34:49 +00:00
3f98593d27
in vunmapbuf(), call pmap_*remove() explicitly since uvm_km_free_wakeup()
...
will soon no longer do it for us.
2001-08-19 17:34:01 +00:00
ef097c73b0
use pmap_k* in vmapbuf() and vunmapbuf() since there's no VAC on this platform.
...
in vunmapbuf(), call pmap_*remove() explicitly since uvm_km_free_wakeup()
will soon no longer do it for us.
2001-08-19 17:33:10 +00:00
8b7128e398
Changes in aid of FIQ support:
...
Add ioc_fiq_setmask().
Change ioc_irq_status_full() to use the request registers rather than the
status registers. This is brings it into line with the Unix baclplane, and
makes detecting downgraded FIQs possible.
2001-08-19 15:27:44 +00:00
75ed9ccf7f
fix scsipi_target_detach with wildcard target.
2001-08-19 14:05:13 +00:00
4bc8190b62
Change local offset/label for irqhandlers to Lirqhandlers. Because in
...
ELF _C_LABEL(irqhandlers) == irqhandlers so we were getting self-referential
pointer which causes the IRQ to fall on itself. [With this change the
netwinder kernel can now be *ELF* and boots to multiuser]
2001-08-19 07:29:26 +00:00
7cab3778d5
Make EXEC_ELF32 support std now,
2001-08-19 05:51:09 +00:00
12a212bc5c
Add support for WD33C93 controller and assosiated SCSI devices, and enable
...
by default.
2001-08-19 03:20:36 +00:00
0ac0d0d4e4
Initial implementation of WD33C9x SCSI driver for SGI IP22 platforms.
...
Based on mvme68k and Atari drivers for the same chipset with the
addition of bus_space support. Attempts have been made to seperate out the
machine dependent dma components and more work is required in this area.
Tested on SGI R4K Indy, but has little testing on other platforms.
2001-08-19 03:16:21 +00:00
173f6058ab
Add Chip ID register values for various AMD PCnet parts.
2001-08-18 21:16:34 +00:00
e320555c3b
if_il.c lives in dev/qbus now, and is mentioned in dev/qbus/files.uba.
...
Remove commented out line for it.
2001-08-18 14:52:37 +00:00
b605664b49
Include bsd.own.mk a bit earlier so that make cleandir works.
2001-08-18 12:53:58 +00:00
cebeb402de
Fix white space usage.
2001-08-18 12:48:59 +00:00
a5226c0bb5
Remove files describing hp300/HPBSD.
...
Can still be found in sys/arch/hp300/DOC as Debug.tips and HPMMU.notes.
Okay'd by is.
2001-08-18 10:07:35 +00:00
2233d77cac
when fetching an object page to loan out, do so synchronously.
2001-08-18 05:51:44 +00:00
13f671edcf
Improve intr_ack code to support for 3c556,3c556B.
...
Some cards don't have an interrupt acknowledge
register in PCI config space, so we map and write
it, such as CardBus driver does.
2001-08-18 05:49:28 +00:00
c60e896954
undo the part of the last revision that made user block device access
...
use the UBC interfaces. too many problems with that yet.
2001-08-18 05:34:46 +00:00
2d4c311492
Regen; added Avance Logic ALS4000.
2001-08-18 05:00:51 +00:00
563f369b78
Add Avance Logic ALS4000 Audio.
2001-08-18 05:00:21 +00:00
94751b6adc
Make the kernel a tad bigger.
2001-08-18 04:55:29 +00:00
11362870f4
Reorder some function prototypes more logically.
2001-08-18 04:13:28 +00:00
20df032dec
Make lint happier.
2001-08-18 03:47:18 +00:00
02f580ae38
Fix lint problem introduced in last change - if `lint' is defined,
...
#define away __alignof__. Still produces some warnings, but at least
they're not fatal anymore.
Problem noted by Rafal Boni in private mail.
2001-08-18 03:27:02 +00:00
92140aa25f
make this compile.
2001-08-18 00:41:38 +00:00
lukem