When we put a page on the collection list, we must subtract NPVPPG from the
total free count: one for each pv_entry that's free in that page, and one for
each free pv_entry in other pages that we're going to eat by moving the ones
in the page being collected.
* Map the message buffer with access_type = VM_PROT_READ|VM_PROT_WRITE `just
because'.
* Map the file system buffers with access_type = VM_PROT_READ|VM_PROT_WRITE to
avoid possible problems with pagemove().
* Do not use VM_PROT_EXEC with either of the above.
* Map pages for /dev/mem with access_type = prot. Also, DO NOT use
pmap_kenter() for this, as we DO NOT want to lose modification information.
* Map pages in dumpsys() with VM_PROT_READ.
* Map pages in m68k mappedcopyin()/mappedcopyout() and writeback() with
access_type = prot.
* For now, bus_dma*(), pmap_map(), vmapbuf(), and similar functions still use
access_type = 0. This should probably be revisited.
These patches include:
Added framebuffer mapping for color framebuffer to support color wscons
which is coming soon.
Renamed wskbdmap_mfii[ch] to wskbdmap_next[ch]
Changed video to be white on black instead of black on white.
Now handles and discards mouse interrupts.
Video and keyboard is now working on mono machines.
write operations appear to lose scsi interrupts and causes timeouts.
changes in this checkin include:
a nextdma bugfix causing a diagnostic check to erroneously trigger
Changed tail strategy to only use tail buffer for the minimal end slop
changed expected write dma overrun to 32 bytes.
turned on nextdma diagnostic check for dma end address since it
no longer gets triggerred by ethernet dma and helps debug scsi dma.
Added esp debugging printout and support.
a filesystem, but is not stable enough yet for general use.
increased priority of ethernet interrupts, mostly useful to aid debugging
of scsi interrupts while using an nfs disk.
added additional debugging output in the next dma driver.
perform extranneous cache flushes/purges before dma reads/ after dma writes
to aid debugging of scsi dma.
Make the initializer for BAUDLO depend on PCLK directly; it was incorrect on
some ports where PCLK is not 4.9152MHz.
XXX Is the default value actually used?
it still probes the disks ok, but is having trouble with 0xdeadbeef
in buffers read from the disk. Suspected problems with DMA alignment
and toggling the secret ninja dma control register
remove check for normal chaining interrupts and add check for combined chaining interrupts
only when used with a tail chain. This allows scsi to work for short unaligned buffers
and large aligned buffers.
This fix removes putting 0xfeedbeef in the unused restart registers.
When that was done, the machine would panic after a short while
with 0xfeedbeef in the normal dma buffer registers. A restart
cycle is probably hapenning without an interrupt or something.
