5c9e69f795
Fix several alignment problems in this implementation due to its use of
...
word32 pointers to access data stored in word8 arrays:
* align transformation tables on 32-bit boundaries,
* align key schedule on 32-bit boundary,
* align temporaries on 32-bit boundaries,
* align plaintext and ciphertext used in round transformations on 32-bit
boundaries.
2001-05-22 23:45:41 +00:00
1da3759634
Need a compile directory for netwinder
2001-05-22 22:48:09 +00:00
6985df3d25
Add installable CATS kernel
2001-05-22 21:36:45 +00:00
8e9a35bbaa
Enable PowerPC Linux ptrace() emulation
2001-05-22 21:11:54 +00:00
9e29066532
Fixed ptrace() so that it is now possible to get traced process registers.
...
This makes Linux gdb able to run a Linux binary
2001-05-22 21:09:20 +00:00
23e3fc1231
When c_ospeed in termio is null, NetBSD hangup the terminal. Since Linux
...
does not do this, we fake null c_ospeed values by -1 in the kernel, so
that NetBSD does not hangup.
2001-05-22 21:05:49 +00:00
2addefd3d7
Start moving cats out of the arm32 dir into it's own arch dir.
2001-05-22 20:59:25 +00:00
d298a26243
Add back in (again) ISPASYNC_LIP and ISPASYNC_LOOP_RESET async
...
notifications. Let each platform set policy as to what to do
with these.
2001-05-22 19:32:41 +00:00
b9eb902304
Make SDRETRIES an option you can dig out of opt_scsi.h.
...
Add SD_IO_TIMEOUT (an option in opt_scsi.h) also, which defaults to the
normal 60 * 1000 timeout for normal read/write commamds. This allows you
to shorten or lengthen the timeout as needed.
2001-05-22 18:59:57 +00:00
38f6ada8b6
Add SDRETRIES and SD_IO_TIMEOUT option for sd.
2001-05-22 18:58:15 +00:00
822c8273de
Instead of scheduling all interrupts at IPL_BIO, use an IPL_SERIAL
...
handler to clear hardware interrupt bit and schedule actual handlers
using soft interrupts registered with desired IPL.
XXX This slows down interrupt handling a bit (up to a few percent with
XXX ping -f or make-over-NFS benchmarks) in some cases.
2001-05-22 17:54:50 +00:00
3d513c3e7a
Implement generic soft interrupt for hpcarm.
2001-05-22 17:25:15 +00:00
7073a10bbd
Nuke current_mask.
2001-05-22 17:01:16 +00:00
607b14bf7b
Add mii_bitbang attribute to gsip, pointed out by Andrew Gillham.
2001-05-22 16:58:23 +00:00
a888f6ef73
If the cache line size in the BHLC register is not configured,
...
then clear the MRL/MRM/MWI command-ok flags when attaching a
device.
2001-05-22 16:10:44 +00:00
79859fb138
Regen.
2001-05-22 16:07:56 +00:00
6e2bc5b352
Enable the PCI MWI command for memory writes on the i82558 and
...
higher.
2001-05-22 16:05:01 +00:00
b16ba1d8cd
Add i82562ET id.
2001-05-22 16:04:27 +00:00
188e0d6625
Some changes from the new FreeBSD `fxp' driver:
...
- Add some additional config block bits for the i82558/i82559.
- Change the config block template to only fill in the must-be-one
reserved bits, leave fxp_init() to fill in all the important things.
- On the i82558/i82559, we can use "Receive Long Frames" rather than
"Save Bad Frames" to support the VLAN MTU.
- Use 802.3x flow control on the i82558/i82559. This is all handled
transparently by the hardware. When in promiscuous mode, allow
wire-watchers to see the flow control frames.
- Use the Extended TxCB format on the i82558/i82559. This places two
Transmit Buffer Descriptors directly in the TxCB, which should cover
the vast majority of packets transmitted. This saves PCI transactions
that would otherwise be required to fetch the TBD list.
With the tansmit queue length changes from yesterday, this gets us up to
11.5MB/s TCP transmit speed, out of an absolute maximum of 12MB/s possible
on a 100Mb/s link.
2001-05-22 15:29:30 +00:00
2a604875d6
Remove one extra byte from scsipi_mode_select; pointed out by Juergen
...
Hannken-Illjes.
2001-05-22 15:14:24 +00:00
e25bf167a1
Regen.
2001-05-22 10:43:15 +00:00
f43e2c6ba1
Add Scanjet 4300.
2001-05-22 10:38:56 +00:00
94bba09883
bus_space'fied fd driver by TSUTSUI Izumi,
...
works with PICA-61 and Microsoft-Jazz,
but still doesn't work with his NEC-JC94 (NEC Express 5800/230)
due to data overrun.
2001-05-22 03:22:49 +00:00
a5a03e13dd
Report 82558, 82559, etc. based on chip revision. Also, remember which
...
revsion we have for feature enables later.
2001-05-22 01:23:25 +00:00
892627dd05
Merge the swap-backed and object-backed inactive lists.
2001-05-22 00:44:44 +00:00
4af61a686a
oops. Make it compile.
2001-05-22 00:43:12 +00:00
b5805fa0c8
Sigh. Regen correctly.
2001-05-22 00:41:52 +00:00
611e112566
A little slight cleanup.
2001-05-22 00:27:01 +00:00
7a31dfa328
Supoprt the IOGEAR/ATEN UC-232A, which uses the Prolific 2303.
...
Make this the "PRODUCT_PL2303" because it's actually id 0x2303
and change the old PRODUCT_PL2303 to PRODUCT_RSAQ.
2001-05-22 00:18:03 +00:00
d5d0b41422
Reset the status register after abort.
2001-05-22 00:16:49 +00:00
8809460317
Correct ring buffer handling in recording. From Isaki-san.
2001-05-22 00:15:54 +00:00
fb4607ec45
Add some additional register definitions, from FreeBSD.
2001-05-22 00:07:32 +00:00
0064d69faf
Re-arrange the transmit control data somewhat so that we can
...
use the extended TxCB format (that change will happen later).
2001-05-21 23:58:44 +00:00
92d92b1cb2
Correct an easy mistake in initializing gain registers.
...
This will fix the L-R imbalance.
Suggested by Ryo HAYASAKA <ryoh@jaist.ac.jp>.
2001-05-21 23:55:04 +00:00
65ac078927
Sigh, typo in last.
2001-05-21 23:21:27 +00:00
b3421335d9
There is no iommu prom node on JavaStation 1 and sbus node is directly
...
under root. If /sbus is encountered on sun4m - attach implied iommu
first and attach /sbus under it. Adjust bootpath accordingly to match
the attachment.
2001-05-21 22:44:07 +00:00
00f922fa70
Change NTXSEGS from 16 to 8, and the TXQUEUE len from 128 to 256. Also
...
increase the number of Rx buffers from 64 to 128.
These mirror some performance tweaks made to the sip(4) driver.
2001-05-21 22:20:31 +00:00
afdab0cab8
The ICH3 also has the Resume Bug.
2001-05-21 22:12:08 +00:00
a0f9e3c6fb
Regen; add ICH3 network controller IDs.
2001-05-21 22:11:31 +00:00
6b51adfbff
Add ICH3 network controller IDs.
2001-05-21 22:11:06 +00:00
d84e2452ea
Fix non-fatal typo -- CB_NOP -> CU_NOP in the ICH work-around (they
...
have the same value).
2001-05-21 21:49:51 +00:00
b4538a0165
The 82801BA built-in Ethernet has a bug which requires us to
...
issue a NOP before a CU_RESUME when in 10baseT mode. Handle
this.
2001-05-21 21:47:52 +00:00
2867b0b94c
PR#12885, added PROM name translations for fas, from John Heasley <heas@shrubbery.net>
2001-05-21 21:25:28 +00:00
e7a0ef6145
ANSI'ify.
2001-05-21 20:59:38 +00:00
ecb3a30463
add $NetBSD$
2001-05-21 20:47:13 +00:00
7fd9577e9e
fix WSDISPLAYIO_PUTCMAP bug.
2001-05-21 18:37:30 +00:00
128d6fc64b
Check RBB and REB bits in the console getc function and go to DDB
...
when a break signal is detected.
2001-05-21 16:50:35 +00:00
c8589412aa
recompile.
2001-05-21 16:02:02 +00:00
5618978d88
don't install SH4 binary.
2001-05-21 15:57:02 +00:00
fbb95fdb04
change window layout.
2001-05-21 15:55:04 +00:00
ed95b7ebe4
rework the way to set booted-console flag.
2001-05-21 15:54:25 +00:00
3462fe5d99
Remove reference to adapter_q in scsipi structure. Comment about the
...
usage of channel_q.
2001-05-21 15:50:46 +00:00
878353d5a8
Added support for kernel cores on the sun2. This
...
increases sizeof(struct cpu_kcore_hdr).
2001-05-21 14:48:58 +00:00
cded1f4afe
Initialize to CGA mode. Wscons expects this.
2001-05-21 14:30:41 +00:00
b14e1e46e1
Regen.
2001-05-21 14:09:09 +00:00
598241f757
add product COREGA FEther-PCC-TXF
...
kern/11357 and report from goro@venus.dti.ne.jp
2001-05-21 13:48:25 +00:00
fd7d5008e8
regen
2001-05-21 13:45:10 +00:00
4108bc4645
add product COREGA FEther PCC-TXF
2001-05-21 13:44:48 +00:00
679b424519
Without __HAVE_NWSCONS, the keyboard won't attach...
2001-05-21 13:30:31 +00:00
cdc294674b
add LINTSTUBs
2001-05-21 06:13:12 +00:00
c8057dc287
remove needless externs in front of function prototypes
2001-05-21 04:47:35 +00:00
510d65b241
sync with GENERIC: enable SOFTDEP, add vlan, etc.
2001-05-21 03:37:30 +00:00
17dad5433e
abstract "${OBJCOPY} --output-target=ecoff-littlemips"
2001-05-21 03:34:48 +00:00
07d4fbd104
fix spelo in comment
2001-05-21 03:31:36 +00:00
2ed6d9dbf7
PR/12991: Dave Huang: DVD ioctls don't work because we send the wrong size
...
CDB (16 instead of 12).
2001-05-20 21:07:58 +00:00
86e12294cd
Add Multi-media/Ethernet card from Irlam.
2001-05-20 21:07:06 +00:00
65165c3deb
16-bit podules I acquired at Wakefield:
...
- Added SJ Research Nexus
- Note HCCS use same ID for IDE and SCSI cards
- Update Castle EtherSCSI entry
2001-05-20 20:40:19 +00:00
2a553a6c8d
Implement notimplemented() for OpenFirmware.
...
Implement opf_nextprop().
Reuse obp_v2_putstr for OF promops.
2001-05-20 20:38:24 +00:00
43adc87035
Save OpenFirmware client interface handler in romp, where it is
...
expected to be. GC unused opf_romp variable.
2001-05-20 17:28:16 +00:00
cb675810e0
add more comment about firmware of EVAL-CARD.
2001-05-20 13:14:54 +00:00
449c740399
Remove tests for IPN_FRAG bits.
...
There is no place in the source where this bit could ever be set (or I'm
to blind to find it).
This fixes PR 12671.
If someone thinks this is the wrong solution, please make sure to (a) reopen
the PR and (b) explain to me how the tested bits would ever get set. I'll
be glad to then look further for the real cause (i.e. the flags not getting
set in the case described in the PR).
2001-05-20 13:03:39 +00:00
c13971f816
chenge chip and card identity,
...
print RF-chipset, Medium Access Controller(MAC) and CARD-identity
2001-05-20 12:57:57 +00:00
309a9b433c
delete RCS Id from pcmciadevs rev 1.128
2001-05-20 10:47:50 +00:00
3b35709de7
make compile again
...
(fix warning : missing white space after `#define....)
2001-05-20 09:54:47 +00:00
89047f2566
Added powerpc status in a comment
2001-05-20 09:29:10 +00:00
a2dd9d529f
regen
2001-05-20 09:16:14 +00:00
caed7fa236
add vendorID National Instruments
...
add productID PCMCIA-GPIB
2001-05-20 09:15:54 +00:00
8db6fcfd51
Move the diagnostic tests with the if.
2001-05-19 23:47:19 +00:00
281f1795a4
Add TI 1410 to yc_chipsets[].
2001-05-19 19:46:08 +00:00
e3daef46ec
Add some IBM PS/2 support bits:
...
* recognize PS/2 L40 via biosmca() and biosmca_ps2model in gatea20.c, instead
of being a compile time option
* if the system is PS/2 with MCA bus, map DTYPE_ESDI disks to ed(4) for
COMPAT_OLDBOOT
The new code is conditional on SUPPORT_PS2 define, which is on by default
for biosboot-based bootblocks.
2001-05-19 18:15:14 +00:00
2a7ff4a9ab
Add biosmca.S if I386_INCLUDE_PS2 variable is "yes" (default, overridable)
2001-05-19 17:53:30 +00:00
a3703d68ef
Backed out a previous commit that was incomplete and hence broke several
...
emulation package build
2001-05-19 17:28:33 +00:00
05fe8173f8
Fixed a typo in a comment
2001-05-19 14:31:00 +00:00
937cea769e
Brain'o in last. Pointed out by Steve Woodford <scw@netbsd.org>.
2001-05-19 14:20:40 +00:00
3d863329cc
space/TAB cosmetics
2001-05-19 12:04:07 +00:00
37a42fd1bf
Moved e_flags outsied of ifdef __HAVE_MINIMAL_EMUL in struct emul
...
and removed an ifdef that was taking care of this problem
2001-05-19 08:52:05 +00:00
a1931e2305
Remove unneeded scsipi includes.
2001-05-19 05:22:41 +00:00
6e435a5783
Use platid_search to get the GPIO pin number.
2001-05-19 05:07:02 +00:00
e6d4fd2a55
Don't compute pseudo header checksum if nxt == 0.
2001-05-19 00:36:37 +00:00
1af4d30054
Don't compute psuedo header checksum if nxt == 0.
2001-05-19 00:30:35 +00:00
905e7935a9
Don't compute psuedo header checksum if nxt == 0.
2001-05-19 00:13:53 +00:00
66d1e28936
Don't compute psuedo header checksum if nxt == 0.
2001-05-19 00:04:56 +00:00
9d582d76fc
notice siop boot devices.
2001-05-18 23:32:48 +00:00
2f3c8dae5a
correct some comments. <80 char debug statements.
2001-05-18 22:01:57 +00:00
f42ff7ccae
minor cleanups.
2001-05-18 22:01:19 +00:00
38025bb818
kill dead code.
2001-05-18 21:53:26 +00:00
e8e471a863
cross compile friendly.
2001-05-18 21:50:45 +00:00
a9f7a4e194
move the sbus IOMMU work around into the sbus code, so that the psycho
...
doesn't have to lose a page.
2001-05-18 21:35:23 +00:00
5c9dc5b0d0
When abusing structs to describe on-wire (or in-hardware) data structures,
...
they need to be packed. (Without this, breaks on at least m68k.)
2001-05-18 21:11:43 +00:00
0bbf8dcb9f
update some unused code to reality.
2001-05-18 21:00:47 +00:00
b590763f79
Call __syncicache in db_write_bytes. (makes breakpoints work better).
2001-05-18 20:38:27 +00:00
ad064c38d9
defopt KGDB
2001-05-18 19:59:03 +00:00
0996d006da
do not force ebus interrupts to have bit 0x20 set.
2001-05-18 19:17:50 +00:00
e4334b830d
Don't capitalize the word sync or async. It's inconsistient with other
...
messages.
2001-05-18 16:25:07 +00:00
d5338ae90e
Regen.
2001-05-18 15:35:49 +00:00
679f6a1a54
Add product IDs of internal devices found in NEC VRC4173 and vendor/product
...
ID of MediaQ MQ200.
2001-05-18 15:35:19 +00:00
4cb4a99c18
Don't define __LDPGSZ if it's already defined.
2001-05-18 15:34:28 +00:00
69c174610f
Only on the 68010, define a different mcount() function,
...
one that doesn't use the memory-indirect addressing mode.
2001-05-18 15:33:03 +00:00
8160155f03
Only on the 68010, assemble versions of copypage
...
and zeropage that use the 68010's loop mode.
2001-05-18 15:31:38 +00:00
a90c8b6620
ANSIify and minor KNF.
2001-05-18 14:51:40 +00:00
8aa2f73d43
Enable tagged queuing again; should work now with scsipi_base rev 1.42
2001-05-18 12:57:42 +00:00
8b5bf22895
Workaround for broken drives (explained to me by Chris G. Demetriou):
...
some devices can't handle tag number larger than some values and always
reject commands with QUEUE FULL if the tag number is larger than this.
Under some circonstances the scsipi system may not decrease periph_openings
(as a workaround of other odd behavior) and we may end up requeuing the command
with a hight tag value again, and the driver could loop on this.
Workaround: in case of queue full, decrease periph_openings to
min(periph_active - 1, periph_openings - 1) so that, after some iteration,
periph_openings is less than the max tag value acceptable by the device.
Solves the problem with tagged queuing on ncr53c9x for me.
2001-05-18 12:56:28 +00:00
d76bcda838
Fixed some typos, removed unused asm() labels. Removed
...
the DMA map creation, now the bus glue does this.
2001-05-18 12:51:58 +00:00
9cb9b76e3a
cleanup and ELF preparation (_XXX_LABEL(), .align)
2001-05-18 11:51:57 +00:00
3df4a7a4a8
do this console device lookup thing the right way this time
...
(This "dev" argument to the console functions is nonsense - nothing
should depend on it.)
2001-05-18 11:49:21 +00:00
32f3bee595
fix typo in comment
2001-05-18 08:56:27 +00:00
4601552595
Regen
2001-05-18 06:14:40 +00:00
6f032f45b3
Support the Socket EA pcmcia ethernet (ne). It's ooooold.
2001-05-18 06:05:52 +00:00
f1f78293df
- Add some instrumentation which can be enabled by defining
...
SIP_EVENT_COUNTERS.
- Decrease SIP_NTXSEGS to 8 and increase SIP_TXQUEUELEN to 256.
This gives us 256 transmit jobs with only twice the descriptor
memory footprint. This prevents stalling transmissions due to
lack of transmit jobs under heavy load.
- Increase SIP_NRXDESC to 128 so we don't run out of receive descriptors
under extreme load.
- As recommended by the manual, leave one descriptor in the transmit ring
with OWN clear to prevent wrap-around.
- Even though the manual claims that driver software must initialize
TXDP if there are no pending transmissions when a new transmission
is to be initialized, doing so causes serious performance degredation
on the DP83820 under heavy load. Not initializing TXDP also increases
performance on the DP83815.
All of this gets us up to ~90Mb/s on both the DP83820 and DP83815 when
connected to a 100base network.
2001-05-18 04:38:30 +00:00
dbdf3820d8
Add a driver for the National Semiconductor DP83820 Gigabit Ethernet
...
chip. This is found on the NetGear GA-622 and Asante FriendlyNet
GigaNIX.
2001-05-18 02:03:53 +00:00
6ae30e0e6e
Don't touch GIU{USE,TERM}UPDN_REG_W if ONLY_VR4122 is defined.
...
XXX ... for now. better way is needed.
2001-05-18 01:41:39 +00:00
78350f3c60
Add ${AOPTS} to AFLAGS
2001-05-17 23:48:31 +00:00
7ddcb8122d
SDEV_DB -> SCSIPI_DB
2001-05-17 20:02:56 +00:00
bc8eda57c9
increase the delay after PHY reset - it seems that mii register accesses
...
can fail if attempted too soon after reset
2001-05-17 19:00:18 +00:00
199e9f8164
regen
2001-05-17 17:39:30 +00:00
10aff2d3f0
argh - the OUI of PMC-Sierra is 00-e0-04, according to IEEE.
...
They managed to mess it up in a new way.
2001-05-17 17:39:00 +00:00
c1f451f54d
regen
2001-05-17 17:37:01 +00:00
2e9334d53e
add some stuff I got between my fingers
2001-05-17 17:36:30 +00:00
c1617a9b13
check PCI subsystem ID for a SMC9432BTX1 or SMC9432FTX and tell the common
...
driver about their media support (BNC and 100FX, respectively)
2001-05-17 17:35:13 +00:00
323adb5a41
support BNC interfaces (serial mode) as on the SMC9432BTX and 100FX
...
on the SMC9432FTX
2001-05-17 17:32:47 +00:00
1ea0cb1ea4
support the fiber output of the PHY device, enabled if the MIIF_HAVEFIBER
...
flag is passed in from the board driver
2001-05-17 17:29:54 +00:00
002851041c
re-enable mii_flags in attach args - I've found a use for it: tell the
...
PHY which support it that a fiber interface is present
2001-05-17 17:28:21 +00:00
9c92176b44
don't bother providing duplicate code for {read,write}_eflags() since it's in cpufuncs.h anyway
2001-05-17 16:35:06 +00:00
b9528c4bd8
Call doshutdownhooks() in cpu_reboot().
...
It was not called when I committed the osiop, and I didn't notice
osiop caused problem when I fixed cpu_reboot()...
2001-05-17 14:53:54 +00:00
fc66251bda
plug memory leak on invalid fragment packet. supress noisy log. from kame
2001-05-17 14:01:37 +00:00
0fcd8f3c7f
regen
2001-05-17 13:15:47 +00:00
8f8e3e808f
add products
...
Intel PRO/Wireless 2011 LAN PC Card
2001-05-17 13:14:19 +00:00
c7db455f32
Fix fomula to calcurate TClock; TClock = VTClock / tdiv, not PClock / tdiv.
...
The manual is inconsistient about this.
2001-05-17 13:10:46 +00:00
5e1115908d
Revert previous change; this breaks for the old controllers which 1.6
...
should help for. Instead, weaken the "echo" test: don't insist in
getting the same value back which was written.
2001-05-17 10:48:39 +00:00
d1bc67e029
In osiop_scsidone(), call scsipi_done() even for polled operations.
...
This fixes a `hang' on shutdown when the `Synchronise Cache' command
is sent to a disk. (It uses polled mode because it is called from inside
a shutdown hook).
2001-05-17 10:35:30 +00:00
c74dc48133
Use VRIP_SIU_ADDR instead of 0x0c000000 for base address of serial console
...
or kgdb connection.
2001-05-17 06:00:22 +00:00
c2b5ec5220
Add a few nits. Hubs seem problematic on resets sometimes.
...
Also, make sure fwohci can detach cleanly (for cardbus).
2001-05-17 05:30:37 +00:00
f2649e3000
Include opt_vr41xx.h and vrcpudef.h
2001-05-17 05:25:32 +00:00
e82d2d52c6
vr4122 releted definition.
2001-05-17 05:04:30 +00:00
8f77918d6c
the call to uvm_km_valloc() in pmap_init() can end up triggering a call to
...
pmap_growkernel() on large memory machines. at this point we've already
called uvm_page_init(), so we can no longer use uvm_page_physget().
but the flag we use to decide whether to use uvm_page_physget() vs.
uvm_pagealloc() is only set at the end of pmap_init(), so we use
uvm_page_physget() anyway. switch to using uvm.page_init_done to decide
how to allocate pages, since that's the real indicator of when we have to
change methods.
2001-05-17 02:31:26 +00:00
bcc2ce4f8c
give sunkbd and sunms a "poll" routine.
2001-05-17 02:24:00 +00:00
c7a624dcc6
Allow to pass -d option to kernel.
2001-05-17 01:50:35 +00:00
6859233343
bcopy is dead on i386. the one use left in the kernel was in locore.s
...
itself, and that got replaced with a call to memcpy. Ross deserves
most of the credit.
note that if you've seen bcopy elsewhere in the kernel, systm.h
defines it as a macro...
2001-05-16 22:09:36 +00:00
90cabee3fb
Per helpful suggestion from LukeM- make INLINE usage consistent (and
...
use correct __inline format).
2001-05-16 21:41:52 +00:00
8e532c1ad1
Make sure to allocate big enough mbuf data area before elevating
...
interrupt priority, to avoid allocating additional mbufs on
splsched(). Move some other misc bits out of splched()-guarded
section. This should make the code a bit more friendly wrt e.g.
clock interrupts. Sligh performance improvement was observed with
this change (like 1-2% on slow machine), even.
This also fixes ancient kern/2478 by Bill Sommerfeld.
2001-05-16 20:30:52 +00:00
c22fb1db55
Finally nobble the bus_dmamap_sync() problem with osiop(4).
...
Basically, bus_dmamap_sync() `PREREAD' needs to flush the cache
for the start and end of the region if it is not aligned to
a cacheline boundary, otherwise a subsequent POSTREAD can *purge*
valid data which was in the cacheline but *outside* the region
passed to bus_dmamap_sync().
Bus snooping doesn't always help here because osiop(4) calls
bus_dmamap_sync() with POSTREAD even if no data was actually
transferred! (And we can't rely on snooping on the 68060 models anyway).
2001-05-16 19:06:46 +00:00
35f2b9136a
get up-to-date (cleanup, get rid of vm_offset_t)
2001-05-16 18:50:52 +00:00
2df9b8f13f
get up-to-date (cleanup, splimp->splvm)
2001-05-16 18:49:51 +00:00
038ce6b8af
get up-to-date (sprinkle pmap_update())
2001-05-16 18:49:05 +00:00
26085708d5
get up-to-date (get rid of vm specific error codes, sprinkle pmap_update())
2001-05-16 18:48:21 +00:00
29182d41aa
get up-to-date (splimp->splvm, cleanup, sprinkle pmap_update())
2001-05-16 18:47:04 +00:00
96a430ba30
If _SOFT_FLOAT is defined, pull floating point va_args from the GPR
...
area and not the FPR area (by having the double argument type test
always fail).
Fixes problems using <stdarg.h> with -msoft-float.
2001-05-16 15:41:03 +00:00
9c23ab2d54
Add "switch to ELF".
2001-05-16 15:01:40 +00:00
8a78799bf4
support BUFFALO AirStation WLI-PCM-S11
...
this card are PRISM2.5 card.
2001-05-16 14:33:21 +00:00
3c3caa0eb2
don't generate opt_spec_platform.h
2001-05-16 14:26:40 +00:00
c6da2452c0
Put back /usr/include/dev/tc/sticreg.h.
2001-05-16 13:48:52 +00:00
25221c413e
regen
2001-05-16 12:57:55 +00:00
4c575cc65b
add product
...
BUFFALO AirStation 11Mbps WLAN Card
2001-05-16 12:57:27 +00:00
cbcd644ce8
sigreturn() fix (from kleink)
2001-05-16 12:42:38 +00:00
43923690d3
Add an entry for Victor MP-C303.
2001-05-16 11:13:20 +00:00
389aaa8b08
Regen.
2001-05-16 11:06:27 +00:00
7cd4cb0d25
Define platid for Victor InterLink MP-C303
2001-05-16 11:04:57 +00:00
9b368d61a4
Add AirMac frontend.
2001-05-16 10:56:42 +00:00
fb619e9a70
Calc. cpu speed for VR4122.
2001-05-16 10:49:18 +00:00
eef5fa50d3
Big-endian support.
2001-05-16 10:45:36 +00:00
cfc3edb550
remove some debugging leftovers.
2001-05-16 08:45:50 +00:00
2f39ebba50
Victor MP-C303 uses 4k pagesize. So, ask system instead of hardcoding it.
2001-05-16 08:40:51 +00:00
422ad4763b
The lower bound for getPage is _addr_table_idx, not 0.
2001-05-16 08:37:44 +00:00
679894e9ae
Add missing close paren in message.
2001-05-16 08:19:42 +00:00
aa09aa91c7
Search the entire device-space of bus 0 if the router device
...
address is set to 000:00:0, and the compatible router entry
is undefined.
Patch PR port-i386/12880 by Dave Sainty <dave@dtsp.co.nz>.
2001-05-16 08:10:36 +00:00
8406481cd3
Regen.
2001-05-16 07:53:54 +00:00
15833cae3b
add prism chip identity, Prism2 with SST flush.
2001-05-16 07:53:28 +00:00
7cab6084a4
Fix errors in previous commit:
...
- forgot PCI bus
- forgot pckbd config
2001-05-16 07:50:29 +00:00
ff47810d07
fix previous delint
2001-05-16 06:29:01 +00:00
c45b32243a
Add a VAXANY type. Eventually to used in INSTALL / GENERIC to easily
...
include support for all VAX platforms
2001-05-16 05:36:53 +00:00
4201bf1ae0
nuke bcopyw and bcopyb. It is unclear what they were for, and nothing
...
called them.
2001-05-16 05:01:28 +00:00
c15945130c
delint: remove unnecessary assignment to same objection (hidden in #define)
2001-05-16 04:50:11 +00:00
be493349d2
delint: zero sized array initalisation is a gccism
2001-05-16 04:39:03 +00:00
927097774a
delint: remove volatile from fxp_mdi_read() decl
2001-05-16 04:20:55 +00:00
e266791dab
Add a couple of include LINTSTUBs and fix some LINTSTUB prototypes.
...
Still exits hard because of bcopy/memcpy problem, but that is a
legitimate problem. bcopy should go and be replaced with memcpy to fix this.
2001-05-16 04:18:52 +00:00
4be93c9ed7
Add a /* LINTSTUB: include <foo.h> */ mechanism.
2001-05-16 04:17:04 +00:00
b81e69fa8e
beginning basic 2300 infrstructure support
2001-05-16 03:58:34 +00:00
bf16779f43
allow long typed functions
2001-05-16 03:58:14 +00:00
9f2c2c7a8c
Keep up with the Joneses.... further synchronization for the eventual
...
implementation in NetBSD for target mode.
2001-05-16 03:58:03 +00:00
73eba1a839
Long overdue- put locks on the usage of the mailbox command stuff. This
...
keeps us from stomping on ourselves.
Say we're in the middle of re-evaluating a loop (and sleeping) when a
command completes, or a timer refires, and this *other* thread decides
*it* wants to start re-evaluating the loop. Bad news.
We have to be a bit careful- if we can't acquire the MBOX semaphore at
interrupt level, we will simulate a host interface error. This is a bit
of a temp workaround. There's some work underway driven by a NetBSD
commercial user that will try and force most mailbox stuff into a
part A/part B interrupt driven model.
2001-05-16 03:55:15 +00:00
a1dd9d78ee
It's 'role None', not 'role No'.
...
Also, pay attention to the difference in the ISPASYNC_CHANGE_NOTIFY
between loop and fabric changes.
2001-05-16 03:52:10 +00:00
f1362289d2
changes to lint invocation:
...
- sort lint flags
- add flags -F (full pathname), -g (gcc extensions; XXX for now)
- lint CFILES before LINTSTUBS
- don't -Dvolatile=
- don't grep -v 'static function.*unused'
2001-05-16 03:48:45 +00:00
49fda862f9
When MACHINE_ARCH is m68000, compile ffs.c and random.c
...
instead of ffs.s and random.s, and sneak the libgcc
integer support routines into the list of library objects.
2001-05-16 03:30:39 +00:00
332aa50acb
Use the EXTBL macro where we want the extbl instruction.
...
On the 68010 this expands to an extw/extl combination.
2001-05-16 03:14:12 +00:00
8ba384c841
On the 68010, we are forced to do bytewise compares
...
and copies if the two addresses aren't of the same
evenness.
2001-05-16 03:06:41 +00:00
9a3074ffce
cosmetic change.
...
change version format: <major>.<minor> variant <num>
2001-05-16 02:36:37 +00:00
d8840def52
Expand on the locking notes comment with a XXX warning about u_short fields.
2001-05-16 00:16:01 +00:00
91d9961f24
Regen
2001-05-15 23:18:16 +00:00
75d77bf185
Add OUI for PMC-Sierra. Add BCM5221 Phy. Add PM8351 Phy.
2001-05-15 23:17:48 +00:00
f5d9baae2f
Note that extended status is in register 15
2001-05-15 23:16:40 +00:00
44cdfc6a17
Change MALLOC()/FREE() to malloc()/free() for cases where the size
...
argument is a variable.
2001-05-15 22:38:40 +00:00
098ba22210
1) Add infrastructure to generate lint stub files from stylized
...
comments in .S files.
2) Update "make lint" target to use generated lint stubs.
2001-05-15 22:34:36 +00:00
3fe923fc2c
I -> Ignore
2001-05-15 22:32:02 +00:00
e69a194db2
1) Add stylized comments (used by new lint stub generation
...
infrastructure) to indicate what C stubs should be generated for
various entry points.
2) Add comments noting various artifacts discovered while performing
task 1), including a bunch of stuff that may very well no longer be
used.
2001-05-15 22:31:38 +00:00
7cb4818421
awk script to automatically generate lint stub files from stylized
...
comments in .S files.
2001-05-15 22:23:09 +00:00
634da40a5a
Don't apply #pragma pack(1) to struct ntfsmount. This fixes unaligned
...
crash on alpha. Problem noted and fix provided in kern/12726 by Dave Huang.
2001-05-15 22:17:05 +00:00
6ae38c2f7a
Try the kbc_auxtest if the random write/read to the aux port fails (it returns
...
0xfe on my gateway 2000 circa 1993). That should not affect broken controllers
that choke on the kbc_auxtest, because for those the write/read test succeeds.
2001-05-15 22:01:07 +00:00
a411a63d8e
Add the processor IDs for the 4Kc and 5Kc CPUs and some MIPS32/64
...
coprocessor 0 registers.
2001-05-15 21:48:50 +00:00
a20a67e39b
regen (some unnecessary passthrough stubs eliminated)
2001-05-15 21:39:31 +00:00
da5867c716
Eliminate passthrough syscalls stubs which only call appropriate sys_foo()
...
without any change.
Fixes kern/7270 by Bill Sommerfeld.
2001-05-15 21:37:47 +00:00
c2ffdccb2b
Regen; Add National Semiconductor DP83861 1000baseTX PHY.
2001-05-15 21:37:33 +00:00
8fd542b023
Add National Semiconductor DP83861 1000baseTX PHY.
2001-05-15 21:37:04 +00:00
56839426da
This file is not used on alpha, and it causes some warning that break the
...
build. Added an ifdef to ignore the file content for alpha (not tested)
2001-05-15 20:35:02 +00:00
825165a54a
Octal numbers _must_ have a heading '0'!
2001-05-15 18:59:45 +00:00
fd61423f9b
Change _ARM32_*_H_ to _HPCARM_*_H_.
2001-05-15 16:15:22 +00:00
d62b92e0f7
delint: () protect some macro args
2001-05-15 15:41:27 +00:00
889762fbcf
delint: need ; between case label and }
2001-05-15 15:25:04 +00:00
37aedd067b
delint: fix comments
2001-05-15 15:20:29 +00:00
103a49d158
delint: don't try & return something from void eisa_intr_disestablish()
2001-05-15 15:07:37 +00:00
e3134697e1
delint: remove comments from macro args; confuses cpp/lint
2001-05-15 15:06:23 +00:00
09ba301f07
delint: () protect some macro args
2001-05-15 15:00:04 +00:00
9bef152bd7
delint: need ; between case label and }
2001-05-15 14:57:49 +00:00
33e8c1a04f
delint: don't try & return something from void pci_intr_disestablish()
2001-05-15 14:48:57 +00:00
0b6a1eb95a
delint: () protect some macro args
2001-05-15 14:37:36 +00:00
d3e16de232
delint: need ; between goto label and }
2001-05-15 14:30:24 +00:00
8f3dc26a16
Don't forget to set dma_count register in picaDmaStart().
...
XXX fd still does not work. (no longer hangs, but causes data_overrun)
2001-05-15 14:29:17 +00:00
68f5fe6e81
Split pci_machdep into a generic/hades/milan part. There is much difference
...
in configspace and interrupt handling.
2001-05-15 14:14:48 +00:00
b6b83e2ec3
delint; use MAX(sizeof(..),sizeof(..)) instead of max(...) for array size
2001-05-15 14:03:27 +00:00
3ac9086605
Add an NMI handler for the Milan.
2001-05-15 13:57:43 +00:00
13a9902fc6
delint: can't have an empty case item at the end of a switch; need a ; at least
2001-05-15 13:53:20 +00:00
4a1227bb56
Add some Milan support functions:
...
- Low level isa interrupt handler
- NMI fault handler - catches PLX access errors
- PCI configspace read/write functions
2001-05-15 13:49:56 +00:00
6d7aa9b12e
Enable NMI for Milan. It is used for signalling PLX faults.
2001-05-15 13:46:23 +00:00
ae0203ee27
Correct arguments to bus_dmamap_create(), and add a reset routine for the v3
...
interface.
2001-05-15 12:49:37 +00:00
0071e88a8c
fixed mistake.
...
major version and minor version were made reverse.
2001-05-15 11:45:50 +00:00
4bff72882b
Missings from the previous commit.
...
From Izaki-san.
2001-05-15 09:10:05 +00:00
08d33f4cc0
Fix indentation in recent commit.
2001-05-15 09:06:15 +00:00
91646d1aa5
Eliminate lhs cast (incorrectly accepted by gcc)
2001-05-15 09:04:00 +00:00
4afb07bd12
getting prism2 firm ver routine to wi_get_id().
...
if firm ver is more than 0.8c3, promiscuous mode is off.
typo WI_RID_STA_IDENEITY -> WI_RID_STA_IDENTITY
2001-05-15 09:01:27 +00:00
9ae59f3041
convert two consecutive "shll"s with one "shll2"
2001-05-15 08:54:56 +00:00
0aae41bf84
Clean up comment about unregistering callbacks
2001-05-15 06:54:07 +00:00
c3967bca55
Various small changes.
...
Clean up one bug in a DPRINTF in arrs_input which could panic on some packets.
Gut the ack/response functionality and clean it up so all packets get checked
correctly and the abuf struct isn't used once the ab_cb has happened (there
still could be ack packets waiting to be processed at that time).
Finally, add some documentation explaining read/write/inreg and their
purpose/argument calling.
2001-05-15 06:52:30 +00:00
d91da495a9
Back out last change until I get fwohci rototilled better for checking the ack bits. Makes things compile again.
2001-05-15 06:30:30 +00:00
96398342f4
Rather better to have |= to make sure spl0 condition, allowing to preserve
...
processor model specific SR bit pattern on pcb0 initialization.
2001-05-15 06:01:23 +00:00
caa399b739
WEP cannot be used when Prism2 Firm version is lower than 0.8.3.
...
Although WEP is used in Windows also in an old firm,
because WEP is processed by the windows driver side.
If Prism2 Firm version is more than 0.8.3, WEP does work without 'Promiscuous ON'.
2001-05-15 04:27:22 +00:00
4d4231d0e9
Add support for "Corega FEther CB-TXD".
...
kern/12709: from Yamashiro Jun <j99060@ie.u-ryukyu.ac.jp>.
2001-05-15 04:26:23 +00:00
b003ab3d9c
Regen.
2001-05-15 04:25:12 +00:00
0f5babc5cb
Add product "Corega FEther CB-TXD". Modified from kern/12709.
...
from Yamashiro Jun <j99060@ie.u-ryukyu.ac.jp>.
2001-05-15 04:24:28 +00:00
2970b99ac9
It enabled it to control roaming mode and authentication mode.
...
Roaming mode can change value into 'firm mode' and disable.
Authentication mode can change into 'Open System authentication'
and 'Shared Key Authentication' with Prism2 chip.
wi_get_id() was introduced in order that chip might judge automatically
whether it is Prism2 chip. Therefore, a pp_prism2 entry in
"struct wi_pcmcia_product" became unnecessary.
2001-05-15 04:14:06 +00:00
38c798fe9f
Encapsulate name declarations in macros in preparation for adding
...
conditionally-compiled code for the DP83820.
2001-05-15 03:06:21 +00:00
edfd12a9b1
Define the register/descriptor differences between the DP83815 and the
...
DP83820. The DP83820 definitions are wrapped in #ifdef DP83820, since
there are enough differences that a single binary object would not be
able to efficiently drive both the DP83815 and DP83820.
2001-05-15 02:19:05 +00:00
6cb5e77db5
remove use of gcc syntax for designated initialisers when initialising
...
unions `union_elem: ...', and use c99 syntax `.union_elem = ...' only
where necessary.
in this case, there's no need to tag elf_probe_func because that's the
first union element, and therefore, the implicit case. only specifically
mention ecoff_probe_func where necessary.
if we decide to not use this c99 feature for now, at least there's now
less stuff to rip out.
2001-05-15 02:00:12 +00:00
f44b12db52
Make microtime properly monotonic, with code derived from the /alpha
...
implementation.
2001-05-14 23:45:39 +00:00
bdb6ea6ecc
Regen; added DP83820 Gigabit Ethernet chip.
2001-05-14 22:37:24 +00:00
285931ff50
Add product ID for the National Semiconductor DP83820 Gigabit Ethernet
...
chip.
2001-05-14 22:36:06 +00:00
a97bf5e6b4
Change biosmca() to export the model number via biosmca_ps2model
...
variable, if the machine has a MCA bus according to info returned
by BIOS (i.e. on machines without MCA bus, biosmca_ps2model would be zero).
biosmca() is expected to be called on beginning the initialization,
and biosmca_ps2model is then used for further checks.
2001-05-14 22:14:47 +00:00
2573405952
Add latent vendor entries for ServerWorks and Winbond IDE controllers.
...
No code to use them as yet.
2001-05-14 20:41:27 +00:00
0c48999192
Rewrote a variable constraint to make gcc 2.95 happy.
2001-05-14 20:39:52 +00:00
c5feae5dbf
Now always define PGSHIFT. Thanks to the ELF move, note the new
...
larger msgbuf size and different KERNBASE.
2001-05-14 20:35:58 +00:00
bc980d7eba
Use SCSI/ATAPI common definition for MODE_{SELECT,SENSE}{,_BIG}. Define
...
functions to send theses commands in scsipi_base.c and use them instead
of ad-hoc commands setups.
2001-05-14 20:35:27 +00:00
26882092f4
o Deal with stray machine checks
...
o Add for alpha a security-sensitive rate-limiting printf(9) wrapper based
on ratecheck(9): void rlprintf(struct timeval *t, const char *fmt, ...);
2001-05-14 19:56:22 +00:00
0c779d0a01
Use the LIST_NEXT & LIST_FIRST macros instead of refering to
...
le_next & lh_first.
2001-05-14 19:50:43 +00:00
f62f237fde
Fix new DEBUGLIST feature.
2001-05-14 19:49:03 +00:00
faa28e2580
Lock vp in nfs_link while we're busy with it (doing VOP_FSYNC, etc).
2001-05-14 18:51:33 +00:00
e047259a1f
Initial import of the known working kernel bits for the NetBSD/cesfic
...
port. cesfic is a VME board with one or two mc68040 processors. See
the README file for details.
The port is working well with a.out userland, there are some problems
with ELF still, like applications running out of memory where it is not
expected. Some parts, in particular the pmap (which was taken from hp300
four years ago), need updating, but this is easier done within the NetBSD
CVS tree.
2001-05-14 18:22:58 +00:00
4eaed60c97
Add IP32
2001-05-14 17:59:22 +00:00
50522d3e8f
Add null ip32_bus_reset. Add cpu_intr_establish which calls
...
crime_intr_establish. XXX cpu_intr_establish needs to have the
"normal" intr_establish arguments.
2001-05-14 17:56:36 +00:00
4cf3bc7ebc
Define splserial to be the same as spltty().
2001-05-14 17:55:03 +00:00
c939f00e98
Abandon disabled_mask and spl_mask, and use only current_spl_level to
...
manage interrupt masking.
This change is necessary for straightforward implementation of coming IPL
support for cascaded intrs, and it should not impair performance.
2001-05-14 16:19:30 +00:00
1ef476f4a4
As a side-effect of the ELF conversion, the msgbuf
...
can now be 8K large. Removed more 68881 code that
is only useful if you have the real silicon, which
the 68010 never will.
2001-05-14 15:36:42 +00:00
9ec520c479
Now, instead of swapping in and out the PROM's segment zero,
...
swap in and out the mappings for virtual pages zero through three,
which are what the PROM really uses. This is tied to the
move to ELF and the low memory usage changes.
2001-05-14 15:12:39 +00:00
b49df54c83
One bonus of moving to ELF is that the boot loader on the sun2
...
now loads the kernel into physical memory at the linked address.
So we link the kernel a little lower virtually, but the bootloader
actually will load it higher in physical memory than before.
This allows us to quadruple the size of the msgbuf to 8K, and
we also shuffle around tmp_vpages and the temporary stack.
2001-05-14 15:07:23 +00:00
d36a2c2284
Made changes to support ELF. Highlights include:
...
To find the kernel symbol table, instead of expecting
the old a.out struct exec from locore.s, use the
ELF headers found after the kernel text.
2001-05-14 15:00:28 +00:00
f7c1abe426
Many changes to support ELF. Highlights include:
...
Added % to all register names. The boot loader now
loads us exactly where we're linked, so no PIC or
remapping funny business. Removed more 68881 code
that is only needed with the real silicon, which
a 68010 will never have.
2001-05-14 14:44:11 +00:00
74d7e1ecfa
Write support for TU58 tapes written.
2001-05-14 14:43:45 +00:00
6c225c676c
Compact the BIOS CFG printout
2001-05-14 14:14:09 +00:00
498fdebcd7
drop multi destination mode (IFF_LINK0).
2001-05-14 13:35:20 +00:00
b38e85279e
Allow attachment of a pc-keyboard at console attach time.
2001-05-14 13:18:47 +00:00
6f308f43e8
Add wscons related includes.
2001-05-14 13:10:45 +00:00
b522de8af5
Adapt for the Milan.
2001-05-14 11:58:30 +00:00
4eec72908c
Regen.
2001-05-14 10:41:03 +00:00
f284e82b99
Add (ws)console stuff.
2001-05-14 10:35:30 +00:00
85c02ac331
epintr(): eliminate write-only variable 'addrandom'
2001-05-14 09:28:49 +00:00
94225b1490
port-mac68l/12931 by Dave Huang:
...
Add an itepoll() function. This one slipped through my recent sweep
of line-disciplines...
2001-05-14 09:27:06 +00:00
6ff7de5716
remove unneeded #includes, fix typo
2001-05-14 08:01:23 +00:00
1f7c685ce3
remove //-commented debugging stuff
2001-05-14 07:35:33 +00:00
497bb809df
do not use the synchronous read mode for MCA 3c529
2001-05-14 07:03:50 +00:00
61ca5f641b
Remove ackcb. It's a duplicate of existing functionality.
2001-05-14 06:51:36 +00:00
98139fa8b9
Make sure and zero out the malloc'd abufs before using them.
2001-05-14 05:46:41 +00:00
7f2de75450
Corega FEther PCC-TXD works fine.
2001-05-14 01:44:42 +00:00
9a107674e5
regen
2001-05-14 01:43:42 +00:00
70f4199532
add product Corega FEther PCC-TXD
2001-05-14 01:41:16 +00:00
73b901c711
Add checksum calculation, busy-wait loops for receive packets and use
...
correct interrupt levels (spl7). Reading tapes now work reliable.
2001-05-13 21:19:44 +00:00
d473f5bd8a
Improved the accuracy of gettimeofday/settimeofday: Linux stores a srtuct
...
timezone in the kernel. We now keep track of it for emulated processes.
Tested for powerpc and i386. Untested on m68k, but it should be ok
Alpha has a particular implementation (osf1_sys_gettimeofday), and it has
therefore not been touched.
2001-05-13 20:54:42 +00:00
2cd8833615
Change the comment about sucky performance to recommendation to remove
...
DIAGNOSTIC/DEBUG from the kernel. This helped to boost the performance
on my test machine from ~5KB/s to like 800KB/s for ftp test, and
to like 700KB/s for netio test. I wouldn't have imagined the options
are THAT costly ....
2001-05-13 20:43:04 +00:00
95fa77ab80
Make this work for PIC (as opposed to pic) without taking chances of fitting
...
__ffstab into a GOT13 relocation; from Eduardo Horvath.
2001-05-13 20:03:45 +00:00
b1c2276feb
Correct a simple bug in the recent commit (pmap.c:1.19) by thopej.
...
I guess he indents to prepare a temporary variable for saving the next
pointer of a list element, but he seems to forget to substitute the
pointer for the variable. This often causes my dreamcast panic.
2001-05-13 19:41:17 +00:00
7e86548d5c
doh, make the last fix compile for '147.
2001-05-13 18:35:19 +00:00
b4c4ecb455
Make this build again ifdef DIAGNOSTIC (oops)
2001-05-13 17:17:34 +00:00
5b2241ad77
Remove pool reentrancy testing overhead unless DIAGNOSTIC is defined.
...
Previously, we passed __FILE__ and __LINE__ on all pool_get/pool_set calls.
This change results in a measured 1.2% performance improvement in
ping-flood packets-per-second as reported by ping(8).
2001-05-13 17:06:58 +00:00
b98b7c2224
turn on printf format-string checking and -Werror. fix all warnings.
2001-05-13 16:55:37 +00:00
kleink