each vm_page structure. Add a VM_MDPAGE_INIT() macro to init this
data when pages are initialized by UVM. These macros are mandatory,
but ports may #define them to nothing if they are not needed/used.
This deprecates struct pmap_physseg. As a transitional measure,
allow a port to #define PMAP_PHYSSEG so that it can continue to
use it until its pmap is converted to use VM_MDPAGE_MEMBERS.
Use all this stuff to eliminate a lot of extra work in the Alpha
pmap module (it's smaller and faster now). Changes to other pmap
modules will follow.
to <sys/types.h> and <sys/stdint.h>.
* Add a new C99 <stdint.h> header, which provides integer types of
explicit width, related limits and integer constant macros.
* Extend <inttypes.h> to provide <stdint.h> definitions and format
macros for printf() and scanf().
* Add C99 strtoimax() and strtoumax() functions.
* Use the latter within scanf().
* Add C99 %j, %t and %z printf()/scanf() conversions for
intmax_t, pointer-type and size_t arguments.
This is a completely rewritten scsipi_xfer execution engine, and the
associated changes to HBA drivers. Overview of changes & features:
- All xfers are queued in the mid-layer, rather than doing so in an
ad-hoc fashion in individual adapter drivers.
- Adapter/channel resource management in the mid-layer, avoids even trying
to start running an xfer if the adapter/channel doesn't have the resources.
- Better communication between the mid-layer and the adapters.
- Asynchronous event notification mechanism from adapter to mid-layer and
peripherals.
- Better peripheral queue management: freeze/thaw, sorted requeueing during
recovery, etc.
- Clean separation of peripherals, adapters, and adapter channels (no more
scsipi_link).
- Kernel thread for each scsipi_channel makes error recovery much easier
(no more dealing with interrupt context when recovering from an error).
- Mid-layer support for tagged queueing: commands can have the tag type
set explicitly, tag IDs are allocated in the mid-layer (thus eliminating
the need to use buggy tag ID allocation schemes in many adapter drivers).
- support for QUEUE FULL and CHECK CONDITION status in mid-layer; the command
will be requeued, or a REQUEST SENSE will be sent as appropriate.
Just before the merge syssrc has been tagged with thorpej_scsipi_beforemerge
- pmap_enter()
- pmap_remove()
- pmap_protect()
- pmap_kenter_pa()
- pmap_kremove()
as described in pmap(9).
These calls are relatively conservative. It may be possible to
optimize these a little more.
call overhead is incurred as we start sprinkling pmap_update() calls
throughout the source tree (no pmaps currently defer operations, but
we are adding the infrastructure to allow them to do so).
* turn ad-hoc `pmap resources allocated during sleep' into a panic condition
(this should all be prevented by higher level VM locking).
* arrange for ENOMEM to be returned if PMAP_CANFAIL is on, and malloc()
and/or pool_get() fail.
processing takes place. This prevents stat clock skew by a factor
approximately proportional to stathz (not a serious problem if stathz==100;
but considerable already if stathz==1000).
a ready-to-use level 1 page table (on sun4m) and MMU context.
A simple `fork()' test shows an improvement in spent system time of
around 4 percent (which is just a bit disappointing, IMO, but it's
an improvement nonetheless).
and use appropriately
- create more helper macros:
. cdev__xyz_init(c,n), such as cdev__ocri_init() for
/* open, close, read, ioctl */, etc.
. cdev__xRy_init(c,n), where nullop is used instead of enodev to dummy out
method `R' and the comments now read /* xxx (read) yyy */ instead
. cdev__xyz_t_init(c,n,t) - as per cdev__xyz_init, but sets d_type = t
as well
- use seltrue instead of dev_noimpl(poll,*), as (IIRC) cdevsw.d_poll should
always DTRT WRT returning a valid result. (a few devices previously
incorrectly returned ENODEV)
- use dev_noimpl(stop,enodev) instead of dev_noimpl(stop,nullop) if tty
== 0, because it doesn't matter if dev_type_stop isn't implemented in that
case, and it allows the use of the cdev__xyz_init macros. certain ports
(sparc,sparc64,x68k) used the nullop method for dev_type_stop in a few
drivers, whereas everything else uses enodev
- ensure that the comments are accurate WRT the behaviour of a given entry
return value of uvm_fault() to the onfault routine via %o0. users of
pcb_onfault now return this value to their callers rather than always
returning EFAULT. this allows i/o errors in VOP_GETPAGES() to be returned
back to read(), etc.
* Print notice if not all CPUs were attached
* Switch to SMP version of cache flush routines in just one place: in
cpu_attach() after all known CPUs have been configured.
- there's no need to have different PV_NC flags for sun4[c] & sun4m
- deal with kvm_uncache() being called on a managed page in a
separate helper function that deals with the caching state
within the pv list for that page, avoiding interference with
the `bad alias' removals in pv_unlink().
Note that currently never called for managed pages, but for now I'm
keeping the support in.
currently necessary to acquire the `running in kernel mode' lock;
pointed out by Bill Sommerfeld/Simon Gerraty.
* remove reference to `cpu_set_kpc()' from comments, as we don't have it.
* message buffer initialisation:
- change the buffer size to 8192 on all platforms
- don't assume the buffer is always located at physical address 0
- drop the SUN4 hack that left first half of the page unused;
I believe this is no longer necessary, since the msgbuf
data structure is duely sanity-checked before use in initmsgbuf().
structure. While this comes with the cost of having to search the
`vm_physmem' array every time need to find a PV entry corresponing to
some physical address, we gain the flexibility needed to support
arbitrary non-contiguous ranges of physical memory addresses.
Also, eliminate the need to sort the memory address ranges as presented
by the machine's PROM, and the requirement that physical memory starts
at address 0 (when possible).
file rather than requiring a raw device. Useful when dealing with vnd's
images and building snapshots. Also allows snapshots to be built in
securelevel > 0.
This adds support for EtherExpress/16 cards with 16k of RAM, and in the
process adds general support for PIO mode on these cards. This entails
changing the way the i82586 driver handles bus barriers, since it doesn't
allow for strange cases like this.
This has been tested on the i386 port with the 'ix' driver in both
16KB (which was the source of the problem) and 32KB modes, as well
as with the 'ef' driver. I've tested it (briefly) with 'ei' on arm26
as well. In theory, drivers other than 'ix' should follow precisely the
same code paths as before.
and link it directly to db_command_table[] so that it's not necessary
to do this at runtime. Make db_machine_command_table[] const on all ports.
g/c now unneded stuff, like db_machine_commands_install(), db_machine_init()
Patch written by enami.
enough, e.g. it has been initialized already by inittodr() or set
explicitly before by resettodr(). This prevents the TOD clock from going
way backwards when typing `halt' at the `mount root filesystem' prompt.
XXX if you have libc after citrus locale import, please recompile libc,
and your applications that use mbstate_t (rather rare). really sorry
for the mess.
only signal handler array sharable between threads
move other random signal stuff from struct proc to struct sigctx
This addresses kern/10981 by Matthew Orgass.
* move all exec-type specific information from struct emul to execsw[] and
provide single struct emul per emulation
* elf:
- kern/exec_elf32.c:probe_funcs[] is gone, execsw[] how has one entry
per emulation and contains pointer to respective probe function
- interp is allocated via MALLOC() rather than on stack
- elf_args structure is allocated via MALLOC() rather than malloc()
* ecoff: the per-emulation hooks moved from alpha and mips specific code
to OSF1 and Ultrix compat code as appropriate, execsw[] has one entry per
emulation supporting ecoff with appropriate probe function
* the makecmds/probe functions don't set emulation, pointer to emulation is
part of appropriate execsw[] entry
* constify couple of structures
rather than assigning to the whole field, set or clear individual flags,
which implies that the B_BUSY and B_INVAL flags will remain set.
this allows us to make the assertion in brelse() that B_BUSY is set,
which is the purpose of all this.
machines are one is very likely to run into SES units (what with all
the D1000's && A1000s out there now). I'll do it in sparc64 as soon
as I get that running for myself.
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.
based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings
maps standard boot flags to corresponding RB_* values
use BOOT_FLAG() in port's MD code as appropriate
as discussed on tech-kern, add new boot flags -v, -q for booting
verbosely or quietly, and corresponding AB_VERBOSE/AB_QUIET
boot flags; also add FreeBSD-compatible bootverbose macro and
NetBSD-specific bootquiet macro
for hpcmips, use new bootverbose instead of it's own hpcmips_verbose
Tested on i386, and to limited extend (compile of affected files) also for
mvme68k, hp300, luna68k, sun3.
routine. Works similarly fto pmap_prefer(), but allows callers
to specify a minimum power-of-two alignment of the region.
How we ever got along without this for so long is beyond me.
all of physical memory, i.e. it conceptually is pv_table[0..avail_end].
The previous version could lead to an off-by-one error in the page allocation
for pv_table[] in some memory configurations.
the stack, and remove the no-longer-necessary PHOLD()/PRELE() calls
in fdformat().
(This eliminates 1/3 of the instances of PHOLD()/PRELE() in the kernel code.)
XXX We still have too many mostly-redundant floppy drivers.
- MB_LEN_MAX is increased to 32.
- To ensure binary compatibility for old executables
under multibyte locale, versioned setlocale is added.
- __mb_len_cur definision is added in setlocale.c
and enable it in stdlib.h .
It is also important for multibyte locale stuffs,
but I just forgot.
Only the low nibble is defined, and on at least one 3gx (mine) there is an
undefined bit which reads as a one -- bit 6 (0x40). This screwed tctrl_intr()
which would loop forever, thinking it always had new events to process.
broken/fragile. Unlikely to be of much use, and confuses new users
when their system crashes when they, or their dhclient stumble over
it. See kern/10500, kern/8994 for the gory details.
* Disable the DMA engine when setting up a DMA transfer, just in case
the 5380 driver didn't instruct us to do so already.
* More useful debug output when entering the "left-over bytes" case after
a DMA transfer finishes.
* put #includes of opt headers and headers to get protos used by
net/netisr_dispatch.h in net/netisr.h (if !defined(_LOCORE)) (rather than
in netisr_dispatch.h itself, and potentially nowhere, respectively).
* require netisr.h to be included before netisr_dispatch.h.
* minor additional cleanup of both netisr.h and netisr_dispatch.h.
* clean up uses to remove now-unnecessary header file inclusions, and
local prototypes of the fns.
* convert netisr dispatch implementations which didn't use
netisr_dispatch.h (pc532) to use it.
- for sizeof(void *) == 8 arch, this is mandatory. MHLEN is too small
already (less than 80) and there are chances for unwanted packet loss due
to m_pullup restriction.
- for other cases, the change should avoid allocating clusters in most cases
(even when you have IPv4 IPsec tunnel, or IPv6 with moderate amount of
extension header)
portmasters: if your arch chokes with the change (high memory usage or
whatever), please backout the change for your arch.
transfer count being smaller than the minimum transfer size for which
we would use DMA. The device may be disconnecting, to complete the
transaction at a later time. Just let the 5380 engine proceed acting
on the current SCSI bus phase.
<vm/pglist.h> -> <uvm/uvm_pglist.h>
<vm/vm_inherit.h> -> <uvm/uvm_inherit.h>
<vm/vm_kern.h> -> into <uvm/uvm_extern.h>
<vm/vm_object.h> -> nothing
<vm/vm_pager.h> -> into <uvm/uvm_pager.h>
also includes a bunch of <vm/vm_page.h> include removals (due to redudancy
with <vm/vm.h>), and a scattering of other similar headers.
"off_t" and the return value is a "paddr_t" to allow mappings
at offsets past 2^31 bytes. Somewhat inspired by FreeBSD, which
only changed the offset to a "vm_offset_t".
Includes updates for the i386, pc532 and sh3 mmmmap from Jason Thorpe.
* replace `flush by line' function with a `flush by page' funtion, which
also takes an argument to indicate that write-back caches need not
validate its backing memory.
* use this function when allocating page table memory to flush the cache
before mapping it into kernel virtual space.
* also use it in pmap_{zero,copy}_page(), so we can safely use non-cacheable
access in there.
and scsipi_device respectively, with size reduction of ncr53c9x_softc.
Specifying NULL instructs the driver to use default adapter and default
device codes. Every target port has ncr53c9x_attach(sc, NULL, NULL) anyway.
marked SONPROC.
- Fix a bug where all cpu_info structures except for the boot CPUs
would exist at both a CPU-local VA (CPUINFO_VA) and a gloal VA;
The boot CPU's existed only a CPUINFO_VA.
- Add a self-reference pointer to the cpu_info that references the
global address in the MULTIPROCESSOR case. Just allow it to reference
the `local' VA in the single-processor case, as CPUINFO_VA is global
enough when there's only one processor to care about. Change curcpu()
to return the global address.
doing a cpu_set_kpc(), just pass the entry point and argument all
the way down the fork path starting with fork1(). In order to
avoid special-casing the normal fork in every cpu_fork(), MI code
passes down child_return() and the child process pointer explicitly.
This fixes a race condition on multiprocessor systems; a CPU could
grab the newly created processes (which has been placed on a run queue)
before cpu_set_kpc() would be performed.
- Change ktrace interface to pass in the current process, rather than
p->p_tracep, since the various ktr* function need curproc anyway.
- Add curproc as a parameter to mi_switch() since all callers had it
handy anyway.
- Add a second proc argument for inferior() since callers all had
curproc handy.
Also, miscellaneous cleanups in ktrace:
- ktrace now always uses file-based, rather than vnode-based I/O
(simplifies, increases type safety); eliminate KTRFLAG_FD & KTRFAC_FD.
Do non-blocking I/O, and yield a finite number of times when receiving
EWOULDBLOCK before giving up.
- move code duplicated between sys_fktrace and sys_ktrace into ktrace_common.
- simplify interface to ktrwrite()
state into global and per-CPU scheduler state:
- Global state: sched_qs (run queues), sched_whichqs (bitmap
of non-empty run queues), sched_slpque (sleep queues).
NOTE: These may collectively move into a struct schedstate
at some point in the future.
- Per-CPU state, struct schedstate_percpu: spc_runtime
(time process on this CPU started running), spc_flags
(replaces struct proc's p_schedflags), and
spc_curpriority (usrpri of processes on this CPU).
- Every platform must now supply a struct cpu_info and
a curcpu() macro. Simplify existing cpu_info declarations
where appropriate.
- All references to per-CPU scheduler state now made through
curcpu(). NOTE: this will likely be adjusted in the future
after further changes to struct proc are made.
Tested on i386 and Alpha. Changes are mostly mechanical, but apologies
in advance if it doesn't compile on a particular platform.
from db_stack_trace_cmd() to db_stack_trace_print(),
and add an additional argument, a function pointer for an
output routine (i.e. printf() or db_printf()).
Add db_stack_trace_cmd() in db_command.[ch], calling
db_stack_trace_print() with db_printf() as the printer.
Move count==-1 special handling from db_stack_trace_print() [nee
db_stack_trace_cmd()] to db_stack_trace_cmd() [nascent here].
Again, I'm unable to test compilation on all affected platforms,
so advance apologies for potential brokenness.
which indicates that the process is actually running on a
processor. Test against SONPROC as appropriate rather than
combinations of SRUN and curproc. Update all context switch code
to properly set SONPROC when the process becomes the current
process on the CPU.
pointer indicating how to print the symbol. This allows db_printsym()
to called in places where db_printf() is not an appropriate output
function.
While straightforward, apologies in advance if I've introduced any minor
syntax errors; I was unable to test compilation this on all the affected
platforms.
- the `alignment' and `boundary' arguments in bus_dmamem_alloc() only
serve as hints on how to break up a DMA transaction into chunks
when necessary; it is not necessary on sparc DVMA hardware.
- exclusively use the VM page size (i.e. PAGE_SIZE et.al.) when computing
resource allocations.
- remember the size of DVMA resource allocations in the private `_ds_sgsize'
field in a dma segment descriptor.
- mark as CPUFLG_CACHE_MANDATORY to avoid cache inconsistencies in
pmap_{zero,copy}_page().
- compute caching alias bits correctly
- add experimental optimisation in ms1_cache_flush().
change these from bp->b_un.b_addr to bp->b_data, as well. This also
allows us more flexibility to experiment with other data buffer types
hung off of struct buf.
Unlike the other Sun machines, UltraSPARCs can have consoles run on different
chips than zs, so we need to support them. So, here we go:
Add a new PROM console driver with a major number and everything.
This is the default driver if nothing else attaches. It does not
use the keyboard driver since the PROM translates keystrokes itself.
(Unfortunately it also swallows L1-A).
Have the keyboard driver take over the console when it attaches on a
serial port. When a serial port detects a keyboard and attaches the
keyboard driver, it needs to provide a set of consdev vectors. They
keyboard driver will use those to send I/O to the keyboard and mouse.
it to determine the boot device: mvme68k, pc532, macppc, ofppc. Those
platforms should be changed to use device_register(). In the mean time,
those ports defined __BROKEN_DK_ESTABLISH.
contains the values __SIMPLELOCK_LOCKED and __SIMPLELOCK_UNLOCKED, which
replace the old SIMPLELOCK_LOCKED and SIMPLELOCK_UNLOCKED. These files
are also required to supply inline functions __cpu_simple_lock(),
__cpu_simple_lock_try(), and __cpu_simple_unlock() if locking is to be
supported on that platform (i.e. if MULTIPROCESSOR is defined in the
_KERNEL case). Change these functions to take an int * (&alp->lock_data)
rather than the struct simplelock * itself.
These changes make it possible for userland to use the locking primitives
by including <machine/lock.h>.
i.e. background at index 0: white, foreground at index 255: black.
Also, allocate a slice for an ANSI colormap, so we can experiment
with coloured text on the bare console.
where the floppy driver would wedge because a motor-on timeout would
be cancelled by another I/O operation cancelling a motor-off timeout.
From enami tsugutomo <enami@sm.sony.co.jp>.
* Remove the casts to vaddr_t from the round_page() and trunc_page() macros to
make them type-generic, which is necessary i.e. to operate on file offsets
without truncating them.
* In due course, cast pointer arguments to these macros to an appropriate
integral type (paddr_t, vaddr_t).
Originally done by Chuck Silvers, updated by myself.
timeout()/untimeout() API:
- Clients supply callout handle storage, thus eliminating problems of
resource allocation.
- Insertion and removal of callouts is constant time, important as
this facility is used quite a lot in the kernel.
The old timeout()/untimeout() API has been removed from the kernel.
kleink