45b36632c0
Add code (off by default) to keep track of the signal strength of the last
...
few packets received from different MAC addresses.
2000-02-27 20:40:42 +00:00
61cc77895b
Some minor cleanup to the probe code.
2000-02-27 20:01:05 +00:00
20e5cfa32f
Billionton Systems Inc. LNT-10TN card.
2000-02-27 11:15:47 +00:00
d386caeaec
regen.
2000-02-27 11:14:43 +00:00
663c327808
Add Billionton Systems Inc. LNT-10TN NE2000 Compatible card.
2000-02-27 11:14:03 +00:00
9a06ea04a2
Fix the same race condition while initializing the socket.
2000-02-27 03:25:03 +00:00
7794bfe183
Reorder the usage of intr_establish/intr_disestablish with respect to setting
...
the CSC_INTR register, to insure that the IRQ is not left floating and enabled
at any point. Eliminates stray interrupts during the IRQ probe.
2000-02-27 03:08:00 +00:00
8c46e74418
Nuke some debugging output that got left in by mistake.
2000-02-27 02:35:33 +00:00
82419f5ae9
Only mark the components as CLEAN if it's the last thing we're doing.
...
Marking them CLEAN earlier is (currently) asking for trouble.
(XXX This could have been done more elegantly.)
2000-02-27 01:50:22 +00:00
a3ae8af043
Allow a flag to be set to force polling for socket events.
2000-02-27 00:14:27 +00:00
16c31080a5
IT8368E legacy mode requires mode change between I/O access and
...
attribute memory access. XXX
2000-02-26 19:02:22 +00:00
d9c47013b2
Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on
...
the component auto-detection and auto-configuration of RAID sets.
Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files.
2000-02-26 17:35:33 +00:00
6f1701b01c
Put a lock on the pcic, to serialize access to the chip during event
...
handling. This is important when multiple cards are present when
the system boots, as we use tsleep now instead of delay in various
places (delay used to provide serialization by virtue of not causing
a context switch).
2000-02-26 17:24:44 +00:00
beecfd4814
cnw is 8bit-only card. map memory region as 8bit only.
...
(there are so many 8bit-only card fixes. don't we have some hint on cis tuple?)
From: feico
2000-02-26 05:34:43 +00:00
52169104c5
Fill in the softc's bus space tag (OOPS!).
2000-02-26 05:11:27 +00:00
78171a3a3e
I told them not to use IST_LEVEL here. Now PCMCIA works on my AS200. *sigh*
2000-02-25 20:48:22 +00:00
49f1a84ad6
Be even more careful about cleaning up the socket at boot time.
...
Also, nuke the windows when the socket is disabled. (They might be deallocated
and reallocated, and would thus cause a conflict.)
2000-02-25 20:45:43 +00:00
caa3932441
Minor cleanups. Remove extra debugging printouts.
2000-02-25 20:11:00 +00:00
21243f6205
- ignore the mod_counter when checking to see if a component fits with the
...
rest of an autoconfig set.
- minor cleanups
2000-02-25 19:56:56 +00:00
503220a18f
- ignore components whose mod_counter values are too low.
...
- noting the mod_counter for autoconfigured sets would be a win too.
2000-02-25 19:56:32 +00:00
7da6407d04
add (minimal, PIO only) support for the popular "Tundra Universe"
...
PCI-VME interface chip and a frontend for the "Bit3 Mod. 2706"
PCI-VME adapter
2000-02-25 18:22:39 +00:00
2fd2b78c1f
Only call the cursor method when the cursor state is actually changing.
...
This avoid corrupting VGA displays in text mode (e.g. the first character
of the prompt when you exit vi).
2000-02-25 17:42:51 +00:00
8d63540a8c
When we close autoconfigured components, we need to note that they
...
are no longer in 'autoconfigured' status.
2000-02-25 17:14:18 +00:00
469464d4c8
add forward declaration of "struct extent", so the extent header doesn't
...
need to be included
2000-02-25 10:33:12 +00:00
7dbe5be481
Disable all windows at boot time, to avoid conflicts when reading the CIS.
...
Also, GC a small bit of code that's inaccesible after the previous change.
2000-02-25 05:26:17 +00:00
ac4c520f05
If we fail to attach the socket driver, clear PCIC_FLAG_SOCKETP so that we
...
don't try to use the socket any further. (This will only happen if the user
explicitly unconfigured some of the sockets.)
2000-02-25 04:24:37 +00:00
1ccb9e8170
when change mbuf type, clear m_pkthdr so that we do not get panic with
...
old data in pointer fields. NOTE: we'll extend m_pkthdr field soon.
Wondering: do mbuf pre-allocation code in elink3.c really buy us much
performance? it comes with code duplicate/synchronization problem with
sys/mbuf.h...
2000-02-25 03:39:13 +00:00
a4f7f062fd
- cleanup raidinit()
...
- cleanup rf_mountroot_hooks()
- various other cleanups.
2000-02-25 02:42:30 +00:00
5716b5d6d1
Be *slightly* more consistent about the use of num and numraid in raidattach().
2000-02-25 02:21:12 +00:00
f5f2ad429c
Initial import of National Semiconductor LM7[89] Hardware Monitor with isa and
...
pnpbios attach.
examples:
lm0 at pnpbios0 index?
lm0 at isa? port 0x290
TODO: spinlocks, i2c interface.
2000-02-25 02:17:43 +00:00
e4e4483cb7
Fix a (slightly) bogus status message.
2000-02-25 02:06:34 +00:00
c86b7572f9
Cosmetic change.
2000-02-25 00:23:57 +00:00
bdd659fc7f
Deal with unconfiguring components in the autoconfigure case.
2000-02-24 23:39:21 +00:00
28fc2b2ee8
Add a DPT ISA HBA frontend, tested lightly with a PM2021A/9X. There are some
...
issues.
2000-02-24 18:49:06 +00:00
50062f0914
- Don't use bitfields.
...
- Cosmetic changes.
- Shut down all HBAs "simultaneously", not individually.
- Don't bother grokking HA_ST_MORE. It causes problems.
- Other bits and pieces.
2000-02-24 18:47:55 +00:00
aea97a5a17
Oops... Missed commmitting this last night. Thanks to Matthias Scheler
...
for letting me know.
(Add the DiskQueueSW pointer)
2000-02-24 17:12:10 +00:00
e644abfe94
Make sure we close auto-configured components appropriately when
...
attempting a rebuild-in-place.
2000-02-24 04:39:41 +00:00
c5961cfba3
Garbage collect some unused stuff. Include rf_kintf.h for a
...
function prototype.
2000-02-24 03:52:15 +00:00
851a2cdcd8
- record the pointer to the DiskQueueSW so we can use that when
...
we hot-add a spare.
- use the above info when adding a spare.
2000-02-24 03:48:41 +00:00
5ed29fa2d6
Delete a superfluous newline in attach message.
2000-02-24 03:42:44 +00:00
9e81bc058e
Now that we have the information available, use the general maxOutstanding
...
value for the RAID set, rather than looking at Queue[0][0] (which may not
exist).
2000-02-24 02:55:05 +00:00
99f070bab8
- mod_counter needs to get incremented more often.
...
- use raid_init_component_labels instead of hand-rolling a component_label.
(missed doing this for the rf_used_spare case when updating component labels).
- fix serial number initialization in raid_init_component_labels
2000-02-24 01:23:05 +00:00
fb13ce76fc
- make sure we note the parity status in the autoconfig case.
...
- also, make sure we grab the serial number from the component labels
when we autoconfig.
2000-02-24 01:22:32 +00:00
df1f794536
Reflect version 1.13 of i82365_isa.c. Untested.
2000-02-23 17:22:11 +00:00
7f8cdf038f
Fix a missing closing parenthesis in an error diagnostic
2000-02-23 08:31:25 +00:00
d94804a788
Pccbb maintains the interrupt handlers for 16-bit PC Cards
...
by itself.
Add some comments.
2000-02-23 07:28:54 +00:00
d91ecfbcfd
Be more aggressive about updating component labels in the event
...
of a real component failure (or a simulated failure):
- add 'numNewFailures' to keep track of the number of disk failures
since mod_counter was last updated for each component label.
- make sure we call rf_update_component_labels() upon any component failure,
real or simulated.
2000-02-23 03:44:02 +00:00
e7f3dc2ec9
blockSize for the component label is already set correctly here.
2000-02-23 02:11:05 +00:00
0c43bf18f0
- cleanup of more component label code
...
- make current default label values available everywhere
- make sure numBlocks and blockSize in component labels get initialized
for all component labels
- check for component size to be smaller than or equal to the partition size
when autoconfiguring
2000-02-23 02:04:21 +00:00
6aaac32240
Do a better job of (re)initializing the component labels after
...
a reconstruct or a copyback.
2000-02-23 02:03:03 +00:00
d84e4ed019
Make a note of autoconfigured components.
2000-02-23 02:01:55 +00:00
e0ab2f3d0f
Correct a comment.
2000-02-23 00:37:11 +00:00
214822e08c
Note the fact that the first arg of raidinit() may be bogus in
...
the autoconfig case (the value of the first arg never gets used, but...).
2000-02-22 23:13:15 +00:00
9651e60835
Fix typos in my last commit that caused the driver to panic.
...
Change some (unrelated) debug messages.
2000-02-22 22:59:49 +00:00
347823e807
Include dev/isa/isavar.h so that this file compiles again.
2000-02-22 22:46:16 +00:00
dcfbcbec76
remove bogus debug (was reading unmapped CCR)
2000-02-22 21:29:36 +00:00
08ef0cfe07
revert previous change
2000-02-22 21:09:50 +00:00
64fa8aa0d6
remove SES driver
2000-02-22 17:43:57 +00:00
e8ff7f6155
Bounds-check the 'last unit' a little more closely.
2000-02-22 16:07:02 +00:00
3f9cf7572c
Don't use void * for chipset tags. Bad hacker, no biscuit.
2000-02-22 16:04:44 +00:00
009856b631
Save and restore a couple ofregisters in the power hook in case BIOS doesn't.
2000-02-22 16:03:42 +00:00
9e16037265
Simplify the attach routine a bit.
2000-02-22 12:24:53 +00:00
b4e291e818
Fix some off-by-one errors; patch from Jonathan O'Brien.
2000-02-22 12:12:21 +00:00
9056664327
Prepare a little for having USB interrupt processing done outside the hard
...
interrupt level (in a thread or a softintr).
No real soft processing done yet.
2000-02-22 11:30:54 +00:00
6cc37002ad
Fix (mostly harmless) typo.
2000-02-22 11:25:06 +00:00
2eda3cf829
Better debug info.
2000-02-22 11:24:22 +00:00
bfaa657135
Fix printf formats on the Alpha.
2000-02-22 08:23:22 +00:00
fb56415023
Add a few comments, and an indicator of whether or not an autoconfig set
...
is 'rootable'.
2000-02-22 03:39:47 +00:00
bd2230fd09
- implement additional component checking before autoconfiguration
...
- make component label setting work again(!!!!)
2000-02-22 03:38:42 +00:00
32f100250f
Cosmetic changes.
2000-02-22 02:38:26 +00:00
b785bb47a0
Establish a powerhook and make sure the card detect interrupt is enabled
...
after resume from suspend, as i82365.c does.
This is a workaround for newer Sony VAIO notebook.
Patch is submitted by Atsushi Onoe (onoe@sm.sony.co.jp ) in PR#9463.
2000-02-22 02:35:26 +00:00
afccbaa6d7
Umm.. let's set 'numraid' to something useful before we try to use it.
2000-02-21 23:33:45 +00:00
8f2d14fbd1
added wmesg argument to pcic_delay debug printout
2000-02-21 20:16:22 +00:00
7f44584598
clen up some error messages
2000-02-21 19:18:53 +00:00
296fbeed2a
Patches from msouth@scruz.net to handle QIC 3220 (HP T20).
2000-02-21 05:11:09 +00:00
158df7b6f1
Don't establish an interrupt if attach is in progress. Anyway, current wdc
...
and its children doesn't require interrupt on attach.
2000-02-21 03:55:22 +00:00
91026fe7f2
Cosmetic changes.
2000-02-21 03:26:41 +00:00
70bbb1b84e
Sync PCMCIA memory mapping with a change from rev 1.47 of i82365.c:
...
always map attr memory 8 bit, since its defined that way. (chopps)
2000-02-21 01:44:36 +00:00
3a76270201
deal with a DELAY vs. delay issue
2000-02-20 22:19:29 +00:00
a3a129e6f5
Oops...I forgot that the GEM-2 chip is so lame that if you don't tell
...
it exactly the right amount of data to transfer for WRITE BUFFER/Global
it will stay stuck in command phase (causing a command phase overrun).
2000-02-20 21:30:44 +00:00
5f0b3b1510
usbd_devinfo_vp(): search the know devs array also if the device
...
doesn't return product description (e.g. Kye's Genius NetScroll
mouse returns vendor, but not product); the strings
returned by device are still preferred to those in the array, though
2000-02-20 14:45:05 +00:00
6b93b03665
regen
2000-02-20 14:39:28 +00:00
e710e0dfa1
Add Kye's Genius NetScroll mouse
...
XXX Should the name be just "NetScroll mouse" ? Kye seems to be manufacturer
XXX for the mouse licenced from Genius.
2000-02-20 14:37:48 +00:00
1c4521f1da
add ses.h to list of includes
2000-02-20 07:39:41 +00:00
c5f8d33f85
minor spelling change
2000-02-20 07:38:48 +00:00
6779fc2bb2
Fix thinko in previous commit.
2000-02-20 03:48:40 +00:00
ac75116d32
Try other config entry on i/o space alloc failure.
2000-02-20 03:18:15 +00:00
6f13498242
correct oops on last checkin
2000-02-19 15:13:07 +00:00
a9697ee5f2
Handle > 12 byte CDBs.
2000-02-19 01:55:42 +00:00
717d5b1cc3
Support for > 12 byte commands for parallel SCSI.
2000-02-19 01:54:42 +00:00
d88aecac57
Remove residual and now broken !ISP_NO_FASTPOST_SCSI code (which was
...
turning back on fast posting!). Redo fabric (re)login loop- don't try
and log out ports that haven't been logged in. Do correct target id
shuffling so we just always find the target ID we want. Add in support
for > 12 byte commands for parallel SCSI. Handle some Dual Bus reset
stuff. Finally fix ABORT COMMAND to use the right 16 bit order of the
handle to abort.
2000-02-19 01:53:56 +00:00
ff86abe827
Cleanup some printaouts.
2000-02-19 01:51:43 +00:00
b6dd4ddacf
Add in ISP_SWIZZLE_CONTINUATION macro.
2000-02-19 01:51:21 +00:00
8c2e6c73e3
Handle dual bus cases for immediate notify and enable lun commands.
2000-02-19 01:50:57 +00:00
98f7f7b5a0
Fix ITDEBUG macro
2000-02-19 01:50:25 +00:00
77dec43b22
Clarify cd_resid tag.
2000-02-19 01:50:03 +00:00
8405ee3752
Add in some mbox return codes that define when we've used up target
...
ids for doing fabric login. Define the 'Get All Next' SNS response
structure.
2000-02-19 01:49:47 +00:00
d282f771e7
Remove redundant CIS definitions.
2000-02-18 18:55:31 +00:00
3e02ded337
Improvement on SFB enabled copycol(); still yet under development,
...
it miserably fails on corner cases.
2000-02-18 06:51:51 +00:00
132107ce3b
Add a whole slew of registers found in the PCnet-PCI family.
2000-02-17 20:18:29 +00:00
6fa8665eeb
Handle detach that happens before attach has finished. (Reported by mycroft.)
2000-02-17 18:42:21 +00:00
50c84950f2
awi: rewrite to be higher performance.
2000-02-17 17:37:23 +00:00
1955c335af
Regen.
2000-02-17 16:30:44 +00:00
536b31a5c8
Add Sony PCGA-UMS1 mouse.
2000-02-17 16:30:11 +00:00
7adb22cfa5
Add detach support.
...
Light cleanup.
2000-02-17 15:58:32 +00:00
f7ad1af2b5
Use bpf_mtap() correctly.
2000-02-17 05:41:41 +00:00
4331d2bcaa
Regen.
2000-02-16 04:29:32 +00:00
021ff75015
Add Toshiba ISA bridge.
2000-02-16 04:29:20 +00:00
7deba340d7
Some of these function names are bad enough that no one else would probably
...
pick them, but preface them with rf_ anyway.
2000-02-16 01:10:44 +00:00
4a1320b29f
Put the entry of FNW-3700T after the entry of SVEC-PN650TX
...
so that SVEC-PN650TX errornously recognized as FNW-3700T.
Pointed out by Takahiro Kambe <taca@sky.yamashina.kyoto.jp>.
2000-02-14 23:13:49 +00:00
b223c00cee
Avoid linker error if no PHY is attached.
2000-02-14 20:29:54 +00:00
1d373a94e2
Bump receive buffer size up to the maximum DMA burst boundary.
2000-02-14 17:14:28 +00:00
a1b5434cec
Make promiscuous mode go again.
2000-02-14 17:06:45 +00:00
085f44145c
- Be more strict in status check before sending a command (make sure
...
DRQ is not asserted). Closes kern/9346.
- Change the "fake identify before the real one" by a delay(). The real cause
of the problem is that the drive is unresponsive just after a reset.
The real problem (and the solution) showed up after the first change.
2000-02-14 12:37:35 +00:00
9558d7b27b
Regen.
2000-02-13 23:10:22 +00:00
a39279da39
Add a bunch of devices.
2000-02-13 23:10:02 +00:00
520d8c032e
Waked up from the dead
2000-02-13 13:01:14 +00:00
99b18eac36
on attach, check if we've got meaningful mac address or not,
...
to detect io mapping problem.
on detach, handle resource deallocations more carefully.
2000-02-13 06:17:58 +00:00
445591e874
Get recent changes into the tree:
...
- make component_label variables more consistent (==> clabel)
- re-work incorrect component configuration code
- re-work disk configuration code
- cleanup initial configuration of raidPtr info
- add auto-detection of components and RAID sets (Disabled, for now)
- allow / on RAID sets (Disabled, for now)
- rename "config_disk_queue" to "rf_ConfigureDiskQueue" and properly prototype
in rf_diskqueue.h
- protect some headers with #if _KERNEL (XXX this needs to be fixed properly)
and cleanup header formatting.
- expand the component labels (yes, they should be backward/forward compatible)
- other bits and pieces (some function names are still bogus, and will get
changed soon)
2000-02-13 04:53:57 +00:00
0b2e81991d
Avoid panic when a non-working hub is detached.
2000-02-12 23:44:16 +00:00
84b6105bbe
Check if device is active in wi_intr and wi_inquire.
2000-02-12 23:35:28 +00:00
fc8ea8f0c5
Misplaced #endif.
2000-02-12 22:06:54 +00:00
d3fb7161d2
Regen.
2000-02-12 22:02:01 +00:00
b4fac8c7d0
Add Microsoft Internet Keyboard Pro.
2000-02-12 22:01:31 +00:00
59748e7e55
Fix the unaligned accesses discovered by dbj.
2000-02-12 21:58:58 +00:00
53e6733789
awi is an 8-bit only card, so set the 8bit flag.
2000-02-12 19:58:35 +00:00
1268cc5d6c
If we got an xfer from our backlog queue, don't allow sleeping; we're in
...
interrupt context.
XXX This is fixed properly in the thorpej_scsipi branch, but that won't
be ready for 1.5, I don't think.
2000-02-12 19:12:52 +00:00
fc72b13d27
Const poison.
2000-02-12 19:05:55 +00:00
02bf7fcd13
add wi_detach and friends so that we can hot-swap wi card.
2000-02-12 16:08:04 +00:00
edc931efea
Make this compile without warnings on alphas.
...
(Problem noted by Aaron J. Grier)
2000-02-12 16:06:27 +00:00
523d157a05
Regen.
2000-02-12 15:02:56 +00:00
a79d73d045
Add Corega FEther adapter. From PR 9394.
2000-02-12 15:02:21 +00:00
01868857df
Add activate routine and check device active flag also in one second
...
tick handler.
2000-02-12 04:05:49 +00:00
fbc47bda30
Cosmetic changes.
2000-02-12 03:55:49 +00:00
1b188ee2ff
A lot of cleanup and shrinkage. Some items moved to isp_tpublic.h.
2000-02-12 02:33:34 +00:00
55a78c1ee4
Add in 12160 (Ultra3) support. Turn back on fast posting for the new
...
generateion parallel SCSI cards (1240/1080/1280/12160). Split up nvram
reading routines to be more readable. Fix topology reporting- 2200 has
connected topology in mailbox 6 when you're done getting your loop id
(supported: Private Loop (NL Port), N-Port, F-Port, FL-Port). The 2100
doens't report this, but we can synthesize it to be either NL-Port or
FL-Port. Add in some connection mode async events.
2000-02-12 02:32:21 +00:00
56e16448ad
add in 12160 (Ultra3) related definitions
2000-02-12 02:29:00 +00:00
9f63fdeefb
add in 12160 (Ultra3) NVRAM definitions
2000-02-12 02:28:32 +00:00
87355d841f
add some Qlogic 2200 point-to-point and extended ICBOPT definitions
2000-02-12 02:26:26 +00:00
50f2620822
add 80 MHz case
2000-02-12 02:25:28 +00:00
3f96822c3b
some minor cleanups
2000-02-12 02:24:20 +00:00
63c56a9de6
add a more public shared i/f to target mode
2000-02-12 02:23:13 +00:00
6eba47aa8f
add (untested in NetBSD yet) Qlogic 12160 (Ultra3) suppot
2000-02-12 02:22:37 +00:00
29f08cd82d
add 12160 (Ultra3) microcode
2000-02-12 02:07:49 +00:00
2db5581a4c
Declare the mcclock_pad32_busfns variable as extern.
2000-02-11 02:36:16 +00:00
29ae6dbe05
We're given a K1SEG address already.
2000-02-11 01:32:42 +00:00
d8595b9af3
map common memory 8 bit for cis scan when following longlinks.
2000-02-10 09:01:52 +00:00
44b423d73b
always map attr memory 8 bit, since its defined that way.
2000-02-10 09:00:19 +00:00
d40e2b51ee
add detach code
2000-02-09 22:15:57 +00:00
e00270524e
ASIX AX88190 support (Planex FNW-3700-T and Melco LPC3-TX) from FreeBSD/PAO3.
2000-02-09 15:40:23 +00:00
67bc20747a
Support Xircom CompactCard Ethernet CFE-10.
2000-02-09 14:54:53 +00:00
99f529f0b3
- Since all resources are mandatory, no need to manage individually.
...
- KNF some code.
- Factor out some code into function.
- Disestablish an interrupt handler when failed to enable card power.
2000-02-09 14:42:33 +00:00
dc87f2899f
- No need to keep track enable/disable state here. The smc91cxx.c also
...
manages it.
- Disestablish an interrupt when failed to enable card.
- Don't say I'm enabled if failed to enable card.
2000-02-09 13:40:42 +00:00
94a6dd9169
Regen.
2000-02-09 13:33:22 +00:00
947c0fee74
Add an entry for Planex FNW-3700-T.
2000-02-09 13:32:23 +00:00
e729d284ad
Add an entry for Melco LPC3-TX.
2000-02-09 13:20:55 +00:00
e92b285eaf
Add an entry for Xircom CompactCard Ethernet CFE-10.
2000-02-09 13:07:45 +00:00
0a1d6b1357
Make it compile with options DEBUG.
...
Reported by Kawamoto Yosihisa (PR #9379 ).
2000-02-09 07:57:52 +00:00
76c14cd322
Don't stall the control pipe on error.
2000-02-08 18:46:03 +00:00
e922214fb2
Use NULL instead of 0.
2000-02-08 18:45:27 +00:00
3bc7ce8d31
Cast bus_size_t to u_long for printing.
2000-02-08 18:40:51 +00:00
73286f8d56
Fix printf() format string.
2000-02-08 18:31:02 +00:00
2a2d421881
Forgotten part of chopps\'s i82365_isasubr.c commit.
2000-02-08 17:56:58 +00:00
ac0db48a13
In light of the previous change, whack the clearing of CSC_INTR
...
again.
2000-02-08 17:53:48 +00:00
eb071839ea
The final read of the CSC register does not appear to be needed any
...
more.
2000-02-08 17:48:39 +00:00
d12c4012f1
deal with loops that we get stuck in due to unhandled interrupts.
2000-02-08 17:14:29 +00:00
5abb516b1e
Be more careful with the CSC_INTR register while probing.
...
Make some output more specific.
2000-02-08 16:59:52 +00:00
f522d6f1ee
Supports "USR 3CP5609 PCI 16550 Modem", from Kent Polk.
2000-02-08 16:26:23 +00:00
b3cffb232f
regen
2000-02-08 16:24:00 +00:00
b614c6a569
Add US Robotics vendor ID, and USR 3CP5609 PCI 16550 Modem product ID.
...
From Kent Polk.
2000-02-08 16:22:37 +00:00
34d63b5623
Since we now only allocate this one, no longer necessary to check and free().
2000-02-08 12:56:00 +00:00
1658944ebe
- Don't rely on implicit declaration.
...
- Sinc wi/ existing coding style.
2000-02-08 12:51:30 +00:00
c7573d517e
- Bail out from attach stage if failed to enable card, number of iospace
...
or memspace is unexpected, failed to map iospace or failed to configure
the controller properly.
- Disestablish an interrupt handler if failed to enable card.
2000-02-08 12:49:12 +00:00
e0c519464a
Add methods for ucom to call back on open/close.
2000-02-08 09:18:01 +00:00
8613a0edaa
Regen.
2000-02-08 06:36:46 +00:00
a87f862d24
Add Allied Telesyn AT-1500, lance ethernet.
2000-02-08 06:36:29 +00:00
42e4e9fd0c
Add the missing piece of previous mod.
2000-02-08 04:35:03 +00:00
bfdc6759fb
Don't rely on the receive descriptor's BCAST/MCAST status bits. Test the
...
Ethernet destination address to see if it's multicast.
2000-02-08 00:22:13 +00:00
52a2804a5c
Add a new function call to the ISA DMA API: isa_dmamaxsize(), which returns
...
the maximum transfer size for the specified DMA channel. Make all clients
of ISA DMA use this call to determine their maximum transfer size.
2000-02-07 22:07:27 +00:00
fe551f0e64
Fix a bug in disksort_*() which caused non-optimal ordering when multiple
...
active partitions were on a single spindle. Add a b_rawblkno member to
struct buf which contains the non-partition-relative block number to sort
by.
2000-02-07 20:16:47 +00:00
a534cd4254
Correct John Markus Bjørndalen's horribly mangled name in a comment.
2000-02-07 09:40:37 +00:00
a8365d0e29
Use pcmcia_devinfo().
2000-02-07 09:36:27 +00:00
e2ab50484b
Add a pcmcia_devinfo() function (akin to pci_devinfo). It generates a
...
string suitable for printing in the attach message.
2000-02-07 09:35:29 +00:00
e9a4467c58
Fix thinko in previous revision: it wouldn't catch deassert.
...
Revert the code inside the new test to the previous-but-one revision.
2000-02-07 02:17:18 +00:00
2da22cf2c5
Check for DCD status change interrupts which signal PPS events, even
...
if the line discipline is ignoring carrier (e.g., via comparam()'s
setting of sc->sc_msr_mask). Move PPS timestamp outside the normal
status-change processing, and ignore sc_msr_mask when testing
for PPS events.
2000-02-06 23:23:37 +00:00
dbeafc9dbe
clean up some printfs
2000-02-06 08:14:13 +00:00
958e687d69
LP64 printf fixes.
2000-02-05 20:02:42 +00:00
6d8c9583a7
indent this file
2000-02-05 18:42:37 +00:00
101848d272
run this through indent with some comment cleanup -- more knfing needed.
2000-02-05 18:20:08 +00:00
494c9affea
Support detach.
2000-02-05 18:11:55 +00:00
645c869160
Add detach support for ethernet portion.
2000-02-05 04:44:00 +00:00
9267b8f018
Remove unnecessary includes.
2000-02-05 04:41:49 +00:00
abac10f360
Yet anothor workaround for hpcmips. I guess real problem is somewhere else...
...
With rev.1.37, my MobileGearII for DoCoMo finds both ne0 and wd0
even if pcic_delay_sleep is 1.
With rev 1.40, it fails to find wd0.
2000-02-05 04:34:36 +00:00
2a46aa5d9a
Fix "unused variable" warning when FAILSAFE option is defined
2000-02-04 16:23:14 +00:00
b4edda97d5
Fix a compilation bug due to a missing parenthesys
2000-02-04 15:43:46 +00:00
e037c568cb
Update for cardbus unmap changes.
2000-02-04 13:48:23 +00:00
1facb42e6e
Make the driver work even if DIAGNOSTIC is not set.
2000-02-04 13:43:56 +00:00
29be498635
Add a list of all the currently supported boards
2000-02-04 13:16:22 +00:00
9c688fd57c
s/SYSTEM/SYSMEM/; so that this file compiles again.
2000-02-04 11:04:46 +00:00
8006211b18
fix previous broken commit of the 8-bit memory handling (spotted
...
by Christian Hopps); this will enable 16-bit memory accesses for devices
that can handle it
2000-02-04 10:18:28 +00:00
augustss